T2000 Network Installation pause

I'm seeing very strange behavior out of my two T2000 servers when I do a network installation. In short, it pauses for a very long time during the boot cycle. There is a pause for at least 45 minutes, sometimes even longer than that. Any help would be greatly appreciated.
Here's what I see:
{0} ok boot net3 -sv
Boot device: /pci@7c0/pci@0/pci@2/network@0,1 File and
args: -sv
100 Mbps half duplex Link up
Requesting Internet Address for 0:14:4f:2:d5:d5
100 Mbps half duplex Link up
module /platform/sun4v/kernel/sparcv9/unix: text at [0x1000000,
0x10789ff] data at 0x1800000
module misc/sparcv9/krtld: text at [0x1078a00, 0x1091647] data
at 0x184e900
module /platform/sun4v/kernel/sparcv9/genunix: text at
[0x1091648, 0x11e6387] data at 0x1854040
module /platform/sun4v/kernel/misc/sparcv9/platmod: text at
[0x11e6388, 0x11e638f] data at 0x18a5c60
module /platform/sun4v/kernel/cpu/sparcv9/SUNW,UltraSPARC-
T1: text at [0x11e63a0, 0x11e967f] data at 0x18a6380
SunOS Release 5.10 Version Generic_118833-17 64-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Ethernet address = 0:14:4f:2:d5:d2
Using default device instance data
mem = 16769024K (0x3ff800000)
avail mem = 16808099840
root nexus = Sun Fire T200
pseudo0 at root
pseudo0 is /pseudo
scsi_vhci0 at root
scsi_vhci0 is /scsi_vhci
pseudo-device: dld0
dld0 is /pseudo/dld@0
px1 at root: 0x7c0 0x0
px1 is /pci@7c0
PCI Express-device: pci@0, px_pci5
px_pci5 is /pci@7c0/pci@0
PCI-device: pci@2, px_pci7
px_pci7 is /pci@7c0/pci@0/pci@2
px0 at root: 0x780 0x0
px0 is /pci@780
PCI Express-device: pci@0, px_pci0
px_pci0 is /pci@780/pci@0
PCI-device: pci@1, px_pci1
px_pci1 is /pci@780/pci@0/pci@1
PCI-device: pci@8, px_pci10
px_pci10 is /pci@7c0/pci@0/pci@8
Requesting Internet address for 0:14:4f:2:d5:d5
Found my IP address: ac107fb1 (172.16.127.177)
hostname: mogget.backup.isc-net.private.invalid
whoami: no domain name
root on 172.16.128.58:/jumpstart/OS/
Solaris_10_2006-06_SPARC/Solaris_10/Tools/Boot fstype
nfsdyn
PCI-device: pci@1, px_pci6
px_pci6 is /pci@7c0/pci@0/pci@1
PCI-device: pci@0, px_pci8
px_pci8 is /pci@7c0/pci@0/pci@1/pci@0
PCI-device: usb@5, ohci0
ohci0 is /pci@7c0/pci@0/pci@1/pci@0/usb@5
PCI-device: usb@6, ohci1
ohci1 is /pci@7c0/pci@0/pci@1/pci@0/usb@6
USB 1.10 device (usb3eb,3301) operating at full speed (USB
1.x) on USB 1.10 root hub: hub@1, hubd1 at bus address 2
hubd1 is /pci@7c0/pci@0/pci@1/pci@0/usb@6/hub@1
/pci@7c0/pci@0/pci@1/pci@0/usb@6/hub@1 (hubd1) online
cpu0: UltraSPARC-T1 (cpuid 0 clock 1000 MHz)
cpu1: UltraSPARC-T1 (cpuid 1 clock 1000 MHz)
cpu2: UltraSPARC-T1 (cpuid 2 clock 1000 MHz)
cpu3: UltraSPARC-T1 (cpuid 3 clock 1000 MHz)
cpu4: UltraSPARC-T1 (cpuid 4 clock 1000 MHz)
cpu5: UltraSPARC-T1 (cpuid 5 clock 1000 MHz)
cpu6: UltraSPARC-T1 (cpuid 6 clock 1000 MHz)
cpu7: UltraSPARC-T1 (cpuid 7 clock 1000 MHz)
cpu8: UltraSPARC-T1 (cpuid 8 clock 1000 MHz)
cpu9: UltraSPARC-T1 (cpuid 9 clock 1000 MHz)
cpu10: UltraSPARC-T1 (cpuid 10 clock 1000 MHz)
cpu11: UltraSPARC-T1 (cpuid 11 clock 1000 MHz)
cpu12: UltraSPARC-T1 (cpuid 12 clock 1000 MHz)
cpu13: UltraSPARC-T1 (cpuid 13 clock 1000 MHz)
cpu14: UltraSPARC-T1 (cpuid 14 clock 1000 MHz)
cpu15: UltraSPARC-T1 (cpuid 15 clock 1000 MHz)
cpu16: UltraSPARC-T1 (cpuid 16 clock 1000 MHz)
cpu17: UltraSPARC-T1 (cpuid 17 clock 1000 MHz)
cpu18: UltraSPARC-T1 (cpuid 18 clock 1000 MHz)
cpu19: UltraSPARC-T1 (cpuid 19 clock 1000 MHz)
cpu20: UltraSPARC-T1 (cpuid 20 clock 1000 MHz)
cpu21: UltraSPARC-T1 (cpuid 21 clock 1000 MHz)
cpu22: UltraSPARC-T1 (cpuid 22 clock 1000 MHz)
cpu23: UltraSPARC-T1 (cpuid 23 clock 1000 MHz)
cpu24: UltraSPARC-T1 (cpuid 24 clock 1000 MHz)
cpu25: UltraSPARC-T1 (cpuid 25 clock 1000 MHz)
cpu26: UltraSPARC-T1 (cpuid 26 clock 1000 MHz)
cpu27: UltraSPARC-T1 (cpuid 27 clock 1000 MHz)
cpu28: UltraSPARC-T1 (cpuid 28 clock 1000 MHz)
cpu29: UltraSPARC-T1 (cpuid 29 clock 1000 MHz)
cpu30: UltraSPARC-T1 (cpuid 30 clock 1000 MHz)
cpu31: UltraSPARC-T1 (cpuid 31 clock 1000 MHz)
System seems to hang here, producing no further output.
System remains available via the ALOM card, which reports no
faults and that the system is running.

Just ran into this myself. It's not pausing; rather, it's pulling the OS across the network veeerrrry sloooowwwwly because the link came up in half duplex while (I'll wager) your switch port is full duplex. If you just let it go, the load will eventually complete--it just takes a while because of the network collisions.
My network guys tell me they've seen problems with the HP Gb switch autonegotiation (that's what my T2k is patched into). Then again, if you're using Cisco gear, then the likely culprit is Sun's autonegotiation code.

Similar Messages

Deskjet 3050 Unsuccessful Network Installation

Hi,
I cannot get my Deskjet 3050 to install across the network on my Windows XP machine. The printer is connected to my wireless router OK (a BT HomeHub 2), the printer network diagnostic says everything is OK and I can access the embedded web server on the printer through a browser. I can even print/scan to the device wirelessly from a separate Windows 7 PC on the same network.
The problem on my XP machine is at the very last stage of the install. I select the Network option from the Connection screen, the network is scanned and my printer is listed OK with the correct IP and MAC addresses. I click Next and the progress bar displays on the Installing Printer screen. Files are copied, but the progress bar then hesitates about 1/3rd of the way across, and then continues. The final screen then says Unsuccessful Network Installation and the printer does not appear on my PC. What can I do to fix this?
Thanks.

I am having the exact same issue with my network installation on the same model. The only information I can add is that my second computer on the network that works correctly with the device is also using the XP operating system. My wireless router is a Netgear WNR2000 and the PC that will not install the printer from the network is connected via ethernet while the laptop that works is connected wirelessly.
As with the previous poster, I am able to view the printer in the list of attached devices from the router administration. I have also tried reserving IP addresses for my devices and selective startup so that all but Microsoft services were disabled at startup, but it still fails installation. I'm hoping there is an HP tech who can shed some light on this because I consider myself pretty handy with installs and I'm at my wits' end.
Thanks for any guidance anyone can provide.

Windows 7 / HP OfficeJet Pro 8600: Unsuccessful Network Installation

OS: Windows 7 Professional 64-bit
Printer: HP OfficeJet Pro 8600
My goal is to enable the "Scan to Computer" feature of my HP OfficeJet Pro 8600 on Windows 7, which doesn't find my computer when I try to use it from the printer's front panel touchscreen. The printer's connected to my local wifi network.
In the setup program on the included CD, I've opted NOT to install any software aside from the "HP OfficeJet Pro 8600 Basic Device Software", which installs fine. I also opt NOT to install the "ePrint" web services or allow it to connect to the network for updates or share usage statistics or any of that.
During the setup program, the "Network Check" correctly finds the printer on my local wifi network, but the following "Network Printer Installation" part always fails, resulting in "Unsuccessful Network Installation", no other details. The result is the same if I retry with Microsoft Security Essentials' "Real-time protection" off, or with Windows Firewall off. No other anti-virus is running.
The "HP Scan" program fails immediately with the error message "The HP OfficeJet Pro 8600 was not found."
Under Control Panel > "Devices and Printers" I see an HP OfficeJet Pro 8600. Windows installs and prints with this printer just fine without the provided CD.
Under Control Panel > "Device Manager" the printer is NOT listed under "Imaging Devices".
My Windows Image Acquisition (WIA) service is running.
Any clues?
This question was solved.
View Solution.

(I never managed to solve this, how did this get marked "Solved?")
I'd be happy with either means of starting a scan. Here are some things I've tried since my last post (sorry, I gave up on this for 2 months and am now trying to get it working again):
I've got the printer connected by USB as well as on the network, and running the software installer with the USB connection option just gets stuck forever at the "Connect the USB Cable" screen. The USB cable is connected.
Under "Scanner Actions" on the HP Printer Assistant application, clicking "Manage Scan to Computer" reports: "Scan to Computer is enabled. You can start a scan from the printer. Your computer is not listed as an available computer on the printer's control panel. Please restart your printer and try again." Tried restarting/unplugging the printer, but that doesn't change anything.
The HP Print and Scan Doctor's first screen reports the State as "Installed" for USB and "Not Installed" for the network. It returns these results for the various steps of "Fix Scanning":
Device Manager: Pass
Driver check: Fail ("The Scan driver is unable to communicate with the product.")
Windows (WIA) scan: Fail (no information given, other than instructions to reboot)
HP Twain scan: Fail ("Scanner communication cannot be established..." dialog)
Registry: Pass
HP Scan: Pass
Since my last post I've also updated the printer's firmware, which seemed to work fine. It's now on firmware version CLP1CN1304AR.
The Windows event log reports several warnings from the software installer saying "Failed to connect to server. Error: 0x800401F0" with Event ID 1015, is this important? Tried it again with Windows Firewall off for both public and private networks, no difference.

Envy 5530 Unnsuccessful Network Installation

I have purchased a HP Envy 5532 a few months ago and i worked, then it stopped connecting so I reinstalled everything and reinstalled it again and I can't get it the printer to connect to my HP Pavillion Laptop My PC is running Windows 8 I have set up the printer and it has found my wireless network and I can print to it from my iphone. However, it will not install successfully from my PC. I have tried both the CD and the download several times.I have also uninstalled the software and started from the beginning as suggested on other postings and I get Unsuccessful Network Installation or Printer Connection Unsuccessful. I have turned off the firewall, but this did not help. I have also taken the following steps:Hold down the Windows Logo key on the keyboard and the 'R' to open the run box, type %temp%Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deletedUninstall the software againWhen the uninstall has completed restart the computerFollow these steps to reset the registry settings and options for Windows Installer. Hold down the Windows Logo key on the keyboard and the 'R' to open the run boxIn the Open box, type msiexec /unregister, and then click OK.Hold down the Windows Logo key on the keyboard and the 'R' to open the run boxIn the Open box, type msiexec /regserver, and then click OK *Note: there is a space between the c and the /
Run Disk cleanup from Accessories\ System Tool < Download and install the latest version of Adobe flash player Restart the computerDownload and run the HP Printer Install Wizard for WindowsThe HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer. Please help, what else do i need to do. This has taken hours and not making any progress.

Hi , Welcome to the HP Forums! I understand that you have an unsuccessful network installation with your HP Envy 5530, on Windows 8. I am happy to look into this for you! Please try the following steps in this order: Uninstall the software. Uninstalling the Printer Software.Clean boot the computer. How to perform a clean boot in Windows.Disable any Antivirus programs. Disable Antivirus software.Disable any firewall programs. Windows Firewall from start to finish.Create a new user account. Managing User Accounts and Logins (Windows 8).Reinstall using the HP Printer Install Wizard for Windows. Let's see what happens! “Please click the Thumbs up icon below to thank me for responding.”

Network Installer: Can't run Disk Utility

Hi, all.
Just created a net install image. SIU's log did not report anything out of the ordinary, however for some reason I can't run Disk Utility, and I need to as the automated installation options frequently don't work.
I select Disk Utility from the Utilities menu and nothing happens.
I run the Terminal and try hdiutil and get
dyld: Library not loaded: /usr/lib/libbz2.1.0.dylib
Referenced from: /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
Reason: image not found
Trace/BPT Trap
Now, if we mount that image on a running Mac we can see the following
bash$ ls -l /usr/lib/libbz*
-rwxr-xr-x 1 root wheel 138436 Nov 1 11:33 /usr/lib/libbz2.1.0.2.dylib
-rwxr-xr-x 1 root wheel 138444 Mar 4 10:19 /usr/lib/libbz2.1.0.3.dylib
lrwxr-xr-x 1 root wheel 18 Nov 29 14:50 /usr/lib/libbz2.1.0.dylib -> libbz2.1.0.3.dylib
lrwxr-xr-x 1 root wheel 18 Nov 29 14:50 /usr/lib/libbz2.dylib -> libbz2.1.0.3.dylib
If we run the same command on the netbooted machine
bash# ls -l /usr/lib/libbz*
-rwxr-xr-x 1 root wheel 138436 Nov 1 11:33 /usr/lib/libbz2.1.0.2.dylib
lrwxr-xr-x 1 root wheel 18 Nov 29 14:50 /usr/lib/libbz2.1.0.dylib -> libbz2.1.0.3.dylib
lrwxr-xr-x 1 root wheel 18 Nov 29 14:50 /usr/lib/libbz2.dylib -> libbz2.1.0.3.dylib
So it looks like libbz2.1.0.dylib is symlink'd to libbz2.1.0.3.dylib, except libbz2.1.0.3.dylib doesn't exist in the netbooted image. But it does exist in the image when it isn't netbooted! Yes, they are the same image!
I also have two "Help" menus, just for kicks.
Does anybody know what's going on? I guess I'll re-create the image, but it'd be nice to understand what's going on and know if it's something I can somehow avoid in the future.
On the lighter side, this is the first time in nearly a year I haven't had to manually insert the CoreVideo.framework to get the image to boot!

Ah, forget what I said about it being the same image. I didn't notice that my chroot hadn't worked when I was checking... I was checking the live system instead. Good thing, too, 'cause that was just TOO weird.
Still doesn't explain why there's a link to a non-existent file. To test I created a symlink for libbz2.1.0.3.dylib which just points at the previous version. Guess what: Disk Utility works now.
I'm re-creating the image anyway and we'll see if the problem exists on that one as well. If it does, I won't be pleased. That'll be two repeatable bugs that break the NetInstall function for me in a year. Not cool.
Anybody else getting weird output if they type hdiutil in to Terminal at the Network Installer? Or do you have a non-working Disk Utility?

Network Installer has quit due to an unexpected error. (exit code 133)

Hi guys. Our school just purchased some new 1.83 Intel Mac minis, and I'm trying to image them using our Powermac (running server 10.4.9). The minis won't boot from the net install image though, the spinning wheel just spins under the grey apple icon.
If I boot in verbose mode I get this error:
The Network Installer has quit due to an unexpected error. (exit code 133)
Please restart your computer.
The net image was created using one of the mac mini's as the master (i.e. off their installation discs + a few extra programs). I've used this process with all our other ppc macs and had no troubles.
Any ideas?

I'm getting the same error in verbose mode. I've made an image from an Intel iMac. My server, though, an Xserve, is running 10.4.8. I think the only difference (and I've gotten past images to work fine) is that I updated the Intel iMac to 10.4.9 in the new image.
What's going on? I've made close to 5 images and each one, the same error.

Network Installation of Photoshop CS4 ?!

hello community!
i want to install photoshop cs4 on a network-drive or an server, to use photoshop cs4 from such clients.
first question: is it possible (network-installation)?
second question: ok, i just have one license. is it possible, that some users can use this _one_ license from different computers? i mean, that on time x user A is working from computer 1 and on time y user B is working from computer 2; (never working at the same time).
thanks for your answers!

Re: Install: Yes, by hacking the install script ini. Not officially endorsed and supported, but you can find info on it on ze interwebs.
Re: Multiuser: No, of course not. It's a clear breach of sections 2.1 to 2.3 of the generic Adobe EULA (since there is no PS Server, the Server EULAs do not apply) - 1 license, 1 user. It doesn't matter whether they work in shifts or not, by giving to differnt people access under the same license (and I'm sure we are not just talking 2 people here) you exceed the total number of users. The concurrent number of users doesn't matter, to stick with the legal blurb.
Mylenium

OEL 6.0 network installation

Why Oracle doesn't have CD image for network installation?
We have old IBM servers where still only CD drive.
And can't to boot from USB sticks.
But same RHEL distros have it!

Perhaps you will find the following interesting.
Oracle Linux 6 - boot.iso file.
http://forums.oracle.com/forums/thread.jspa?messageID=9406260
http://www.linuxforums.org/forum/red-hat-fedora-linux/173121-how-install-rhel6-via-pxe-boot.html

OS X 10.8 installation paused. How to unpause.

I bought OS X 10.8 last fall. The installation paused. I could never get it to unpause. Now, I just want to buy a new copy and install, but App Store won't let me because it indicates (correctly) I already purchased. Help. How can I get a copy of OS X 10.8 to install so that I can upgrade to the latest version. So frustrated.

Appreciate your quick reply.
What worked for me was to hold down the option-command keys and click on the OS X Mountain Lion download icon.
Thanks!

Not a valid Network Installation Point

Post Author: BGardner
CA Forum: General
This one is obscure but I hope that someone will recognize it. It doesn't appear on any searches.
Crystal 8.5 was installed onto a client's server (used for custom reports in an accounting application). I was able to successfully run a Workstation installation to 2 or 3 PC's using P:\ as the Network Installation Point.
But now the Workstation install fails and returns the message "The directory P:\ is not a valid Network Installation Point - it does not contain the Crystal Reports network files."
Notes:
The cause of the problem is that the server was replaced by a newer one
The new server has the same name and sharenames & drive mappings are identical
All files were copied from the old server to the new one
Everything else runs correctly, including CR on workstations previously installed
I reinstalled CR but with the same results
Server O/S is Windows 2003 on both servers.
Clearly there is something missing (or something that shouldn't be there!). Or could it somehow be a rights issue?
I'm stymied so all suggestions are welcome! Thank you.

You don't specify the version number of 2.6. Is that Solaris 2.6 HW 5/98? Any earlier version of Solaris 2.6 will most likely not work.

Can't uninstall a network installation (Version: WebLogic 8.1 for Windows)

Hi,
As described in the above subject, I encountered an error when trying to uninstall
WebLogic 8.1 for windows, which is installed from another computer (WINXP) thru
network.
The installation executes on the remote machine. When asking the location for
BEA home, I specify a path on a network drive , something like z:\bea.
(z: is the drive of the computer I want weblogic to be installed. I do this because
it only has enough space for the final installation, but not together with the
temporary files)
It seems that everything goes well, although the links in "Program Files" are
created on the remote machine only. However, when I want to uninstall it, I encounter
problems.
First, when using the "add/remove programs" way, it complained that it was not
able to find the path to javaw.exe. I paste the full command Z:\bea\jdk141_03\bin\javaw.exe
-Duninstall.dir="z:\bea\weblogic81\uninstall" -jar "z:\bea\weblogic81\common\lib\uninstall.jar"
and then it went on. Splash screen and the first wizard screen appears afterwards.
However, when I pressed "Next", a prompt appeared, with message ":[z:\bea]".
The same message appeared in console mode uninstallation.
Is there anyway to solve this problem? Thx!

Hi,
I tried to replace all "Z:" to "C:" in registry.xml and re-uninstall again, but
that doesn't work.
Actually the thing I want to happen is only to remove the current (and somehow
faulty?) installation. Is it 100% ok to just remove all the files manually?
David Chan
"Wayne W. Scott" <[email protected]> wrote:
>
David:
It sounds like the install was done on one machine and you are trying
to uninstall from
another. If that is true ...
Check the contents of the registry.xml file and see if the environment
variables match
those of the machine you are working on. In particular, the items that
specify host
names and install directories.
Wayne Scott
David Chan wrote:
Hi,
As described in the above subject, I encountered an error when tryingto uninstall
WebLogic 8.1 for windows, which is installed from another computer(WINXP) thru
network.
The installation executes on the remote machine. When asking the locationfor
BEA home, I specify a path on a network drive , something like z:\bea.
(z: is the drive of the computer I want weblogic to be installed. Ido this because
it only has enough space for the final installation, but not togetherwith the
temporary files)
It seems that everything goes well, although the links in "ProgramFiles" are
created on the remote machine only. However, when I want to uninstallit, I encounter
problems.
First, when using the "add/remove programs" way, it complained thatit was not
able to find the path to javaw.exe. I paste the full command Z:\bea\jdk141_03\bin\javaw.exe
-Duninstall.dir="z:\bea\weblogic81\uninstall" -jar "z:\bea\weblogic81\common\lib\uninstall.jar"
and then it went on. Splash screen and the first wizard screen appearsafterwards.
However, when I pressed "Next", a prompt appeared, with message ":[z:\bea]".
The same message appeared in console mode uninstallation.
Is there anyway to solve this problem? Thx!

Solaris 10 network installation for X2100

I would like to ask that how can I install Solaris 10 over network for Sun Fire X2100 because I did not found the X2100 Server Operating System Installation Guide but I found the Sun Fire X2100 M2 Server Operating System Installation Guide instead.

i've solved the problem myself.
thank you.

Mountain lion installation pause

As far as I can tell, my computer has all the capabilities of installing OS X Mountain Lion. The "faded" icon says that installation has paused. How do I complete the installation?

If it wasn't ML capable it wouldn't have allowed the install, or the purchase if you purchased on this Macl.
If it's been that a while, then restart.

T2000 Network Management

Hi Folks,
I just got a T2000 server, and have hooked it up (sort of).
Right now, I'm running everythign through the serial console, which I've found to be pretty darn ineffective.
I booted into solaris no problem, but I don't know how to get hte management network running.
The first thing I did was set netsc_dhcp=true, since that's how the network is configured. Then I did show netsc_ipaddr, and it told me 0.0.0.0, i.e. I screwed up!
How do I configure the network management port to work? I thought you could just DHCP and let the router take care of everything...
Thanks,
David

Try to run setupsc command (an interactive script mode)
sc> setupsc
and answer the question.

Cannot log onto MySQL CMS Database after network installation

Post Author: matthewh
CA Forum: Authentication
I've just installed Crystal Server XI R2 on a brand new server running MySQL 5.0.45 but when the installation completes it says it can't log on to the CMS database. It's created the empty database and I have the db.opt file in there but nothing else - no tables or anything. I've re-run the installation and done a repair and Modify but with no change. The CMS user has full rights to the MySQL instance for now, so it shouldn't have been an issue. Is there a SQL script available I can run to build the initial db manually? Do I need to uninstall and go through it all again? took over 2 hours across the network and the server is in another part of the country.

Post Author: TAZ
CA Forum: Authentication
Hi Matthew,
I'm not sure why you cannot access your mysql DB but you do not have to reinstall.
Launch the CCM(central configuration manager) If the CMS is not stopped then stop it.
double-click on the CMS choose configuration, choose specify, choose recreate the current data source.
This will reinitialize the CMS DB if the account configured has the proper permissions. It should be a DB owner
Regards,
Tim

T2000 Network Installation pause

Similar Messages

Maybe you are looking for