T2000 , Sol 10 doesnt recognize SG-XPCIE1FC-QF4 after installing 119130-26.
I was able to use the HBA SG-XPCIE1FC-QF4 with Solairs 10 01/06 update 2 with out any recommended patch cluster installed. However, after installing the recommended patch cluster the system couldn't recognize the HBA.
I notice that the patch 119130-26 is part of recommended patch cluster and its creating this problem. Is there any know issues are limitations using this card with this patch levels?
Any help on this will be highly appreciated.
Message was edited by:
SANTestEngineer
Similar Messages
-
Itunes doesnt recognize my iphone 3gs after i upgraded to ios4.1
itunes doesnt recognize my iphone 3gs after i upgraded to ios4.1
When did you upgrade to 4.1? 4.1 is no longer signed by Apple. It's no longer possible to (legitimately) install 4.1.
-
Itunes doesn't recognize iphone sim card after installing io5
I sent hours trying to upgrade my Iphone 3gs to io5 and now Itunes doesn't recognize the phone sim card, I only have a message saying 'There is no sim card in the Iphone you are trying to activate'. Iphone is no longer under warranty, so I don't know what to do if doesn't work any more.
Any advice very welcome Thank you!Same problem with my 3GS :
Impossible to activate IOS 5 because itunes say "sorry there is no sim inside"...
I tried everything and the problem is found on many forum. many people can not activate their iPhone after installing the update. -
My itunes will not recognize my ipod shuffle after installing Mcafee
My itunes will not recognize my Ipod shuffle, I have tried almost everything Itunes has suggested including uninstalling and installing Itunes. I am at a loss, the computer recognizes the ipod and assigns a drive to it. When I click on the drive there are flies in it. I have disabled the firewall, checked all firewall settings as suggested in previous forums. I have tried deleting the temp files but that keeps getting hung up on a file that says it is in use. I can stll use my ipod because it charges but I can not update songs etc.
I contacted Mcafee but all they did was turn the firewall off (I could have done that myself).
If there is any help I would appreciate it!
Thanks,
NadineThe first thing I did in the morning was contact McAfee they turned the firewall off it didnt work so they said it wasnt their problem. I attempted several other things using ITunes help but none of the solutions worked. I would say it is something in my computer but the drive shows up in my files so the computer is reading the USB port. I tried changing the drive but that didnt help.
I cannot find a universal "OFF switch" in McAfee But I have turned the firewall off several times after many different attempts.
I do not find an area where I can tell Itunes where the Ipod is in Windows Explorer, that would be helpful at least it could try to locate it then. You would think this feature would be available since Itunes would like us to purchase music through them to load on our equipment. Since my computer does not recognize my Ipod there is no need for me to purchase music.
Do I sound frusturated - I AM But I appreciate your trying to help. -
Gives the message: "The file “iTunes Library.itl” cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?"
OK to download without risk of losing library?Some Users have reported that a Restore as New has resolved issues after the Update...
See Here
Backup and Set Up as New Device
http://support.apple.com/kb/HT4137 -
Windows XP won't recognize built-in wireless AFTER installing the drivers.
Hello,
I have an iMac, post leopard release.
So I ran Bootcamp, everything went well, and windows XP runs fine. I used an XP Pro edition with SP2 and all of that is in order. I initially used a Leopard Install DVD of my friends to install the drivers, because I couldn't find the disk that came with my mac, and that worked until it got the wireless components, and then would crash windows.
I then found, luckily, and put in the Mac OSX install disk that came with my mac and that installed the drivers.
(or at least I think it did, it sure looked like it was, but afterwards it seemed as though all it did was install a program called Bootcamp that helps with running dual systems on a Mac.)
But XP wont pick up any wireless networks on the page where you can manage your networks. It's as if I have no built in wireless.
I don't know if you have to actually set up the built in wireless to work with windows, or if the disks I put in actually didn't install the drivers. but I'm starting to go insane...
(on one last side note, my wireless mighty mouse and wireless keyboard won't connect in XP either, BUT only after I used the Mac OSX install CD.... it's very strange....Any luck on the wireless issue? I too have a MacBook Pro that accesses the wireless internet with no problems on the Mac side. That is not the case on the PC side, using the Windows XP Professional. I can not access any internet, wireless or hardwired directly into the router. As a matter of fact, the Internet Wizard runs on the PC side and ends saying error.
I've contacted my internet provider, who walked me through the process to create a new internet account, still no luck. Ideas would be wonderful seeing that I have a single piece of PC only software I am trying to use for some charity work. -
TS1059 why wont imovie recognize my isight webcam after installing mavericks?
imovie hasn't recognized my isight camera ever since I installed Mavericks
Hello jonlevesque,
The following article provides troubleshooting steps that can help get your iSight camera working.
How to Troubleshoot iSight
http://support.apple.com/kb/HT2090
Cheers,
Allen -
How do I get ITunes to recognize my IPhone 3GS after installing Mobilme?
I installed Mobilme on my Iphone (I think). Now ITunes tells me it can't sync because Mobilme is not started. What do I do to correct this probelm??
Only one logged in user at a time. You must be logged in to your iTunes account then Menu/Store/Authorize This Computer.
This authorizes your bf's computer for your account. -
Hello. After i upgrade to moutain lion my WD my book studio stop working and my mac doesnt recognize it. I need help please
yes, it appears in disk utilities. but i cant get any information of what is inside. thank for your interest in my issue
-
my 5th generation ipod acts like it is going to sync and then "ejects" itself before even 1 song can be synced. It then doesnt recognize that it has been ejected and keeps the"do not disconnect" icon on the screen even after unplugging. What do I do? it also makes a lot of noise while connected to the computer.
Is the camera damaged? Could be a hardware problem.
Try:
Close the Camera app in the multitasking bar, then try again.
Restart/Reset/Restore your iPod. In that order. -
I lost my ipod touch when i moved flats and i just found it in one of the boxes after 4months and now its asking me to "connect to itunes" but itunes doesnt recognize it because i have a passcode and its asking me to enter it. HEEEEELP please
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
APEX Application URL doesnt recognize parameters (Doesnt work consistently)
Hello,
I have developed an application which I have published in company's intranet website. There are several links published for same application with different parameters. We are facing issues in publishing parameterized URLs as application is not recongizing the parameter values passed (in internet explorer it doesnt recognize at all, but in mozilla, once redirected if we again select address bar and press Enter it does recongize the parameter without changing URL).
E.g. I have hyperlink in intranet with
http://msi-pa-637.marvell.com:7777/pls/htmldb/f?p=111:101:0::NO::P101_PROJECT_INSTANCE:PRJ3
After clicking on the link it does open application, but report with complete data. now in Mozilla if I select address bar and press enter, it refreshes and does retrieve report with desired parameter. Do you have any clue why it doesnt do in first place? (in internet explorer, this work around doesnt help until you manually change the parameter from PRJ3 to PRJ2 and press enter).
Please help.
Thanks,
Prashant
4084311331Thanks Vikas for helping me to figure out myself.
The debug feature really helped!
My application was having computation on same item that was getting defaulted on new instance. I made that computation conditional and now it works!
Thanks a lot! -
When i connect my ipod touch it doesnt recognize it and cant sync
when i connect my new ipod touch to my computer it doesnt recognize it and doesnt sync
Assuming you have a PC start here:
iPod not recognized in 'My Computer' and in iTunes for Windows
For Mac:
Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
HT1926 I updated itunes and now it doesnt recognize my CD drive
I updated Itunes and now it doesnt recognize my CD drive
See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
My ipod is freezing during booting and my pc doesnt recognize it
Hi
I did a restore ipod from my ipod and after it completed it , my ipod cant boot. It freezes during booting and my computer doesnt recognize it when i plug it.
Is there anything I can do ?
Thanks.http://support.apple.com/kb/ht1808
Maybe you are looking for
-
Have tried to identify the site referral, but the opening page and back page of the webmail site have multiple advertisers. My guess is it would require something tailored to the word or image-word MacKeeper, MACKEEPER and Mac Keeper or MAC KEEPER.
-
Here's the scoop: I've got an iPhone 6 Plus. I can find NO audio files anywhere on it. I stream my music using either iTunes Match or Rdio. I've perused settings > general > usage > manage storage, looked in every app listed and there are NO audio fi
-
I dont get it? After calling vzw customer care
I have a quick queston, i thought the concept through this whole thing was for your cc to get charged when the item is SHIPPED. My credit card was charged but no tracking number available. After calling customer care they said it will be shipped on
-
What is twin sign? what kick off (in implementation project)
what is twin sign? what kick off (in implementation project) regards ramana
-
I have so much trouble opening documents etc. I can't even open the folders in my Mozilla profile like my favorites. Its a JSON file. Why does Mozilla use files that I can't open? removed email address from public as per [https://support.mozilla.org/