T3: After replacing PSU, id read u1pcu1 is blank

About 5 hours agi, I replaced a PSU in my T3 since the old one had batteries that were 2 years past their expiration date :-). However, on the replacement, id read u1pcu1output is all blank:
T3-foo:/:<5>id read u1pcu1
Revision :
Manufacture Week :
Battery Install Week :
Battery Life Used :
Battery Life Span :
Serial Number :
Battery Warranty Date:
Battery Internal Flag:
Vendor ID :
Model ID :
Here's the other one (can you say "deferred maintenance"?):
T3-foo:/:<6>id read u1pcu2
Revision : 0000
Manufacture Week : 00262000
Battery Install Week : 00462002
Battery Life Used : 1132 days, 17 hours
Battery Life Span : 730 days, 12 hours
Serial Number : 012232
Battery Warranty Date: 20021115134029
Battery Internal Flag: 0x00000000
Vendor ID : TECTROL-CAN
Model ID : 300-1454-01(50)
I have two solid greens on the repalced PSU, and fru stat says everything is normal.
Do I need to wait a few more hours for the new batteries to charge?
Do I need to do the "id write busage" to fill in this info?
Any ideas?
Thanks,
-w

Well, with the "new" PSU (that has probably been sitting on a shelf for two or three years) , and the other "old" PSU with the 4 year old batteries, "fru stat" is now cycling betweeb both batteries good, one at fault, and the other at fault, at about 8 hour intervals. "id read" output is still blank.
NiMh batteries should be good for a least hundreds of charge-discharge cycles, and should last for many years if charged properly. I have some NiCds AA cells are almost 10 years old (although most lasted about 3 years), and most of my NiMh AA cells are about 3 or 4 years old and show no signs of wekness.
An excellent link to battery information: http://batteryuniversity.com/
Sun has every right to be conservative with T3 batteries, considering the criticality of the application, but the batteries should be good for more than two years if your electricity is not going off every day. I only wonder if the output from "fru stat" is a true indication of the battery's ability to power the system.

Similar Messages

QUICKSILVER: Power problems even after replacing PSU

When I press the power button. The light comes on and fades out.
Before I replaced my rev D power supply with a rev C, the fan would turn about a 1 centimeter when I pressed the power button. Now it does not do that.
The ebay seller claims the power supply was good, but I'm not so sure. Does it make a difference that it's Rev C? This is the PSU I bought:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=300256905483&ssPageName= STRK:MEWN:IT&ih=020
What would cause something like this?

Your internal memory battery may have discharged & needs replacement. Also try a PMU reset. See Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
 Cheers, Tom

How Interim Meter Reading before Device Replacement is adjusted in Periodic Billing after Replacement without sending Interim Bill Doc. to Customer

Dear All,
At my Project Consumption is calculated as per Status and Notes Taken,i,e if it is "OK" reading MR is taken Directly for Consumption Periodically and Billed, but according to Logic if Customer MR Status and Notes is DL and AB(Door Lock and Abnormal) we Estimate Consumption according to logic written.
Now i have a problem when ever OK Reading Billing is done before Replacement - consumption of Replacement (Consumption given when Old Device billing related removal) with OK Notes is getting adjusted after replacement, but when estimation billing by DL or AB or Disconnected status Consumption been billed before replacement and after this device is been replaced is not able to adjust Replacement "OK" Reading (Consumption given when Old Device billing related removal) in Next Periodic Billings. So what i found is adjustment is not happening because of Absence of "OK" MR Billing before Replacement and i asked them to make and Interim Billing so that the consumption should be adjusted before replacement and after replacement there should not be any issue. Now my User is ok with the above idea, but he want Interim Bill Consumption should not be sent to Customer and Interim Bill Consumption should be included in Periodic Billing and Invoice after Replacement is sent to Customer.
Please can any one give me some idea on above scenario.
Thanks & Regards,
Kushal Gupta

PORT YOUR NUMBER OUT...T MOBILE WILL PAY YOUR ETF IF YOU GIVE THEM YOUR VERIZON PHONES.

Powermac G5 won't boot after new PSU replaced- says no ram installed!!!

I've recently inherited a friends old Powermac DP 2.0 G5 after it died a death. After some testing I diagnosed that that PSU had died in it- something that seems quite common.
Having found some detailed instructions online, I sourced a replacement PSU and set about replacing it. All went well with no major problems. I put everything back together and then powered the machine on. The fans whirled to life but there was no video out. I then noticed that the power light was flashing twice and then a break.
I checked on Apple's website and it was saying that 2 flashed is no ram installed. Yet there are 4 sticks installed - surely these all can't be dead? Has anyone got any words of advice? I'll be gutted if it's the logic board as the replacement PSU was really expensive....help!

Could be the RAM, sockets, Logic board, only way to tell is to swap them out.
Have you done a PRAM reset...
http://docs.info.apple.com/article.html?artnum=2238
How to reset the SMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005) ...
http://support.apple.com/kb/HT1436
Earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939

After replace the ATX case for K7T Turbo2 mainboard???

hi, Master outhere help plz...
after replace the ATX case for K7T Turbo2 mainboard??? why not boot up on screen any more , but power running is ok for the CPU fan , if i forgot any thing from this stage plz guide me the step.
thank for kindly supports soon...

psu max amps better than in old case ?
got to many stand offs under the board shorting it out ?

After replacement of my hard drive iPhoto is no longer compatible with my lion software - why ?

after replacement of my hard drive iPhoto is no longer compatible with my lion software - why ?
any suggestions on how to fix this ?

what version of iPhoto are you using? i can't begin to answer that - it is no longer listed in my applications & has only a shadow of its icon in the dock
what version did you have before the drive replacement? same answer
what system version are you running? 10.8.5 - the one i was using when the hard drive died
what exactly do you see when iPhoto attempts to launch? -it doesn't attempt to launch - i get a message saying "You can’t use this version of the application “iPhoto” with this version of OS X. You have OS X 10.8.5. The application requires OS X 10.9 or later".
what have you tried? wringing my hands ! i daren't try anything after the hard drive crash
where is your library located? there is an iPhoto library folder on my desktop with random photos & albums - not all - put there by me - i vaguely remember a problem with iPhoto when i upgraded from snow leopard
did you apply any updates or upgrades just prior to the problem occurring? after the drive replacement i uploaded saved data from a week old back up and found iphoto looking somewhat sick - no updates were offered in software updates
are you running a "managed" or "referenced" library? i'm afraid i do not know what that means
what type of Mac? a macbook pro
how much free space on your boot drive? about 380 GB
thank you very much for your questions - i hope i find some answers

How can i recover my data from an old hard drive after replacing it?

How can I recover my data from an old hard drive after replacing it?

Internal or external hard drive? Was the drive still working before you replaced it?

MacBook Pro does not boot past apple screen after replacing hard drive

After replacing hard drive on MacBook Pro 13 inch early 2011 model, the screen only boots to the apple logo. Do I need to re-install the OS?

The problem is that the OS is not in any where else of the MacBook Pro than in the HD / SSD. If you replace the Hard Drive, then you will need to Re-install OSX into that hard drive, it's pretty easy.
1) Power up your Macbook Pro, as fast as you can press and hold the Option key (ALT). You'll see that it opens the bootable-devices you have, you'll see a Recovery partition, click it.
(If the Hard Drive contains data do the following)
2) In the menu select Disk Utility.
3) In Disk Utility go ahead and select the Hard Drive that is inside the MBP.
4) Erase the content.
(If the Hard Drive contains no data continue with the following jumping the last 3 steps).
5) Select Re-install OSX.
6) Select the Hard Drive in which you want to install it.
Follow the steps of everything else (it should take approximately 1 hour to do the whole thing).
Hope this helps!
Later.

How do I restore my itunes library after replacing a faulty hard drive?

How do I restore my itunes library after replacing a faulty hard drive?

did you make a backup of your library before replacing the HD ?
if so, how and what did you back up ?
if not, you can redownload previous purchases ☞ Downloading past purchases from the App Store, iBookstore, and iTunes Store.
if you have your media files on an iPod, check out this post by Zevoneer.

The g, h and backspace on my keyboard are not working even after replacing with a new one.

The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
...am waiting for a QIUCK RESPONSE

How does a usb keyboard attached externally work?
You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too.

Attempting to reinstall Adobe Photoshop Elements on iMac with OS 10.7.5 after replacement of the HDD

Attempting to reinstall Adobe Photoshop Elements on iMac with OS 10.7.5 after replacement of the HDD under iMac 1TB Seagate Hard Drive Replacement Program.
Would appreciate any help navigating the installation failure message. THANKS!

Thanks for your response! Here's the error message -
"The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."

Getting "replace hard disk error (#10008)" even after replacing hard disk

Hi!
My laptop- HP Pavillion dv 6502- is 4 years old.
Recently, the hard disk supposedly crashed as I was not able to get anything other than a blank screen. I checked with BIOS diagnostics, and it showed error #10008- Replace Hard disk.
So, I went to an hp service centre and got the hard disk replaced.
My earlier hard drive was a Seagate 160 gb momentus 5400.3 disk.
New one is the Seagate 250 gb disk.
The laptop was working properly the day the hard disk was replaced. BIOS diagnostic status for the disk was "Passed"
But, the very next day when i tried starting the system, I got a blank screen again. I again went to BIOS and ran the diagnostic test. I performed the test twice. It took a lot of time to finish- jumping from Reaching till '80% complete', then jumping back to '10% complete', then '90% complete', then '10% complete', and so on.. finally showing '100% complete' and status : #10008 - Replace hard disk - both the times.
Then, I had to go out of station and so, I didn't touch my laptop for 2 days. When i came back, the computer was working fine and the BIOS test status said "Passed" for the disk
What could be the problem due to which my problem wasn't starting earlier- even after replacement of disk? Is it possible that the disk was not the problem in the first place?

Hi!
Turned out the second new Hard disk was also not fine. I went back to the service centre and got the hard disk replaced again. This time the laptop has been working fine.

Audio clips cutting off at the beginning, after replacing audio.

I have received an fla for a complex game, and have been directly replacing the audio clips in it with new ones with the same file name. The game randomly chooses themes, displaying text and a corresponding audio clip. After replacing the old files with the new ones, out of 20 audio clips, about 6 of them get cut off at the beginning. There is no discernible difference in the length of the clips, or empty space at the beginning between the original audio files and the new ones.
Is it possible that there is something happening in the actionscript that could be causing the problem? The fla calls a file calls Themes.as, this is the code in the file, case the answer is in there somewhere:
import utils.Randomise;
class com.tt.games.newsfinder.Themes{
//AVAILABLE THEMES
public static var THEME_1:String = "sports";
public static var THEME_2:String = "music";
public static var THEME_3:String = "pets";
public static var THEME_4:String = "flying";
public static var THEME_5:String = "new teeth";
public static var THEME_6:String = "hats";
public static var THEME_7:String = "bikes";
public static var THEME_8:String = "swimming";
public static var THEME_9:String = "zoos";
public static var THEME_10:String = "shoes";
public static var THEME_11:String = "bedtime stories";
public static var THEME_12:String = "moving house";
public static var THEME_13:String = "cleaning your teeth";
public static var THEME_14:String = "films";
public static var THEME_15:String = "painting and drawing";
public static var THEME_16:String = "food";
public static var THEME_17:String = "drinks";
public static var THEME_18:String = "the seaside";
public static var THEME_19:String = "trees";
public static var THEME_20:String = "boats";
//SELECTED THEM
public static var CURRENT_THEME:String;
//FRAME LABELS FOR ANT NEWS TOPICS
public static var TOPICS_SPORT:Array = ["football","cricket","tennis","balls","bowling"];
public static var TOPICS_MUSIC:Array = ["guitar","recorder","notes"];
public static var TOPICS_PETS:Array = ["fish","hamster","dog","rabbit","mouse"];
public static var TOPICS_FLYING:Array = ["plane_green","plane_yellow","plane_small"];
public static var TOPICS_NEW_TEETH:Array = ["teeth"];
public static var TOPICS_HATS:Array = ["hat1","hat2","hat3"];
public static var TOPICS_BIKES:Array = ["bike1","bike2","bike3"];
public static var TOPICS_SWIMMING:Array = ["goggles","flippers","rubber_ring"];
public static var TOPICS_ZOO:Array = ["octopus","monkey","snake","dolphin"];
public static var TOPICS_SHOES:Array = ["shoes1","shoes2","shoes3"];
public static var TOPICS_BOOKS:Array = ["book1","book2","book3"];
public static var TOPICS_MOVING:Array = ["box1","box2","box3"];
public static var TOPICS_CLEANING_TEETH:Array = ["toothpaste"];
public static var TOPICS_FILM:Array = ["projector","camera"];
public static var TOPICS_DRAWING:Array = ["pencil"];
public static var TOPICS_FOOD:Array = ["cake"];
public static var TOPICS_DRINK:Array = ["tea_pot","cups"];
public static var TOPICS_SEASIDE:Array = ["sandcastle","bucket","spade","crabs"];
public static var TOPICS_TREES:Array = ["tree1","tree2","tree3"];
public static var TOPICS_BOATS:Array = ["boat1","boat2","boat3"];
public static function fGetTopicsByTheme(p_nLength:Number):Array{
var l_aTopics:Array = new Array();
var l_aChosen:Array = new Array();
switch(CURRENT_THEME){
case THEME_1: l_aTopics = TOPICS_SPORT.slice(); break;
case THEME_2: l_aTopics = TOPICS_MUSIC.slice(); break;
case THEME_3: l_aTopics = TOPICS_PETS.slice(); break;
case THEME_4: l_aTopics = TOPICS_FLYING.slice(); break;
case THEME_5: l_aTopics = TOPICS_NEW_TEETH.slice(); break;
case THEME_6: l_aTopics = TOPICS_HATS.slice(); break;
case THEME_7: l_aTopics = TOPICS_BIKES.slice(); break;
case THEME_8: l_aTopics = TOPICS_SWIMMING.slice(); break;
case THEME_9: l_aTopics = TOPICS_ZOO.slice(); break;
case THEME_10: l_aTopics = TOPICS_SHOES.slice(); break;
case THEME_11: l_aTopics = TOPICS_BOOKS.slice(); break;
case THEME_12: l_aTopics = TOPICS_MOVING.slice(); break;
case THEME_13: l_aTopics = TOPICS_CLEANING_TEETH.slice(); break;
case THEME_14: l_aTopics = TOPICS_FILM.slice(); break;
case THEME_15: l_aTopics = TOPICS_DRAWING.slice(); break;
case THEME_16: l_aTopics = TOPICS_FOOD.slice(); break;
case THEME_17: l_aTopics = TOPICS_DRINK.slice(); break;
case THEME_18: l_aTopics = TOPICS_SEASIDE.slice(); break;
case THEME_19: l_aTopics = TOPICS_TREES.slice(); break;
case THEME_20: l_aTopics = TOPICS_BOATS.slice(); break;
if(l_aTopics.length < p_nLength){
//make it long enough!
var l_nDif:Number = p_nLength - l_aTopics.length;
for(var i:Number = 0; i< l_nDif; i++){
//add the list itself, in case its length is 1!
l_aTopics = l_aTopics.concat(l_aTopics);
//now trim it
l_aChosen = l_aTopics.slice(0,p_nLength);
return l_aChosen;
* get a random selection of topics of a fixed length, not including those from the chosen theme
public static function fGetRandomTopics(p_nItems:Number):Array{
var l_aTopics:Array = new Array();
if(CURRENT_THEME != THEME_1) l_aTopics = l_aTopics.concat(TOPICS_SPORT);
if(CURRENT_THEME != THEME_2) l_aTopics = l_aTopics.concat(TOPICS_MUSIC);
if(CURRENT_THEME != THEME_3) l_aTopics = l_aTopics.concat(TOPICS_PETS);
if(CURRENT_THEME != THEME_4) l_aTopics = l_aTopics.concat(TOPICS_FLYING);
if(CURRENT_THEME != THEME_5) l_aTopics = l_aTopics.concat(TOPICS_NEW_TEETH);
if(CURRENT_THEME != THEME_6) l_aTopics = l_aTopics.concat(TOPICS_HATS);
if(CURRENT_THEME != THEME_7) l_aTopics = l_aTopics.concat(TOPICS_BIKES);
if(CURRENT_THEME != THEME_8) l_aTopics = l_aTopics.concat(TOPICS_SWIMMING);
if(CURRENT_THEME != THEME_9) l_aTopics = l_aTopics.concat(TOPICS_ZOO);
if(CURRENT_THEME != THEME_10) l_aTopics = l_aTopics.concat(TOPICS_SHOES);
if(CURRENT_THEME != THEME_11) l_aTopics = l_aTopics.concat(TOPICS_BOOKS);
if(CURRENT_THEME != THEME_12) l_aTopics = l_aTopics.concat(TOPICS_MOVING);
if(CURRENT_THEME != THEME_13) l_aTopics = l_aTopics.concat(TOPICS_CLEANING_TEETH);
if(CURRENT_THEME != THEME_14) l_aTopics = l_aTopics.concat(TOPICS_FILM);
if(CURRENT_THEME != THEME_15) l_aTopics = l_aTopics.concat(TOPICS_DRAWING);
if(CURRENT_THEME != THEME_16) l_aTopics = l_aTopics.concat(TOPICS_FOOD);
if(CURRENT_THEME != THEME_17) l_aTopics = l_aTopics.concat(TOPICS_DRINK);
if(CURRENT_THEME != THEME_18) l_aTopics = l_aTopics.concat(TOPICS_SEASIDE);
if(CURRENT_THEME != THEME_19) l_aTopics = l_aTopics.concat(TOPICS_TREES);
if(CURRENT_THEME != THEME_20) l_aTopics = l_aTopics.concat(TOPICS_BOATS);
l_aTopics = Randomise.fRandomise(l_aTopics);
return l_aTopics.slice(0,p_nItems);
public static function fGetThemeByTopic(p_sTopic:String):String{
if(fIsInList(p_sTopic,TOPICS_SPORT)) return THEME_1;
if(fIsInList(p_sTopic,TOPICS_MUSIC)) return THEME_2;
if(fIsInList(p_sTopic,TOPICS_PETS)) return THEME_3;
if(fIsInList(p_sTopic,TOPICS_FLYING)) return THEME_4;
if(fIsInList(p_sTopic,TOPICS_NEW_TEETH)) return THEME_5;
if(fIsInList(p_sTopic,TOPICS_HATS)) return THEME_6;
if(fIsInList(p_sTopic,TOPICS_BIKES)) return THEME_7;
if(fIsInList(p_sTopic,TOPICS_SWIMMING)) return THEME_8;
if(fIsInList(p_sTopic,TOPICS_ZOO)) return THEME_9;
if(fIsInList(p_sTopic,TOPICS_SHOES)) return THEME_10;
if(fIsInList(p_sTopic,TOPICS_BOOKS)) return THEME_11;
if(fIsInList(p_sTopic,TOPICS_MOVING)) return THEME_12;
if(fIsInList(p_sTopic,TOPICS_CLEANING_TEETH)) return THEME_13;
if(fIsInList(p_sTopic,TOPICS_FILM)) return THEME_14;
if(fIsInList(p_sTopic,TOPICS_DRAWING)) return THEME_15;
if(fIsInList(p_sTopic,TOPICS_FOOD)) return THEME_16;
if(fIsInList(p_sTopic,TOPICS_DRINK)) return THEME_17;
if(fIsInList(p_sTopic,TOPICS_SEASIDE)) return THEME_18;
if(fIsInList(p_sTopic,TOPICS_TREES)) return THEME_19;
if(fIsInList(p_sTopic,TOPICS_BOATS)) return THEME_20;
return "";
private static function fIsInList(p_s:String,p_aList:Array):Boolean{
var l_n:Number = p_aList.length;
var l_b:Boolean = false;
for(var i:Number = 0; i < l_n;i++){
if(p_aList[i] == p_s){
//trace("!!! ** match >> " + p_aList[i] + " matches " + p_s);
l_b = true;
break;
return l_b;
public static function fRandomTheme():String{
var l_aThemes:Array = [THEME_1,
THEME_2,
THEME_3,
THEME_4,
THEME_5,
THEME_6,
THEME_7,
THEME_8,
THEME_9,
//THEME_10, << removed the shoes topic as we didn't have the audio for it!
THEME_11,
THEME_12,
THEME_13,
THEME_14,
THEME_15,
THEME_16,
THEME_17,
THEME_18,
THEME_19,
THEME_20
var l_s:String = String(Randomise.fPickRandom(l_aThemes));
CURRENT_THEME = l_s;
return l_s;
public static function fGetHeader(p_n:Number):String{
var l_sHeader:String = "Can you find " + p_n + " people who ";
l_sHeader += fGetActivity();
l_sHeader += "?";
return l_sHeader;
public static function fGetEndTxt(p_n:Number):String{
var l_sTxt:String = "That's brilli-Ant! You found " + p_n + " people who ";
l_sTxt += fGetActivity();
l_sTxt += "!";
return l_sTxt;
public static function fGetActivity():String{
var l_sHeader:String ="";
switch(CURRENT_THEME){
case THEME_1: l_sHeader += "played sports today"; break;
case THEME_2: l_sHeader += "are learning a musical instrument"; break;
case THEME_3: l_sHeader += "have a new pet"; break;
case THEME_4: l_sHeader += "have been flying"; break;
case THEME_5: l_sHeader += "have lost a tooth"; break;
case THEME_6: l_sHeader += "are wearing a hat"; break;
case THEME_7: l_sHeader += "can ride a bike"; break;
case THEME_8: l_sHeader += "went swimming"; break;
case THEME_9: l_sHeader += "went to the zoo"; break;
case THEME_10: l_sHeader += "have new shoes"; break;
case THEME_11: l_sHeader += "read a book"; break;
case THEME_12: l_sHeader += "are moving house"; break;
case THEME_13: l_sHeader += "cleaned their own teeth"; break;
case THEME_14: l_sHeader += "watched a film"; break;
case THEME_15: l_sHeader += "drew a picture"; break;
case THEME_16: l_sHeader += "baked a cake"; break;
case THEME_17: l_sHeader += "made a cup of tea"; break;
case THEME_18: l_sHeader += "went to the beach"; break;
case THEME_19: l_sHeader += "climbed a tree"; break;
case THEME_20: l_sHeader += "have been in a boat"; break;
return l_sHeader;
public static function fGetSuggestion():String{
var l_sTxt:String = ""
switch(CURRENT_THEME){
case THEME_1: l_sTxt = "How many sports can you think of that you play with a ball? How many of them have you played?"; break;
case THEME_2: l_sTxt = "Do you know any songs? Why not sing it right now?"; break;
case THEME_3: l_sTxt = "How about taking the dog for a walk? You don’t have a dog? Take someone else’s dog for a walk!"; break;
case THEME_4: l_sTxt = "Not everyone can go flying, but everyone can fly a kite! Why don’t you make your own kite and see if it flies?"; break;
case THEME_5: l_sTxt = "Have you got a wobbly tooth? Don’t forget to put it under your pillow when it falls out!"; break;
case THEME_6: l_sTxt = "Does your Mum have a hat? What does it look like on you?"; break;
case THEME_7: l_sTxt = "Can your Dad ride a bike? Why don’t you ask him?"; break;
case THEME_8: l_sTxt = "Can your Mum swim? Why don’t you ask her?"; break;
case THEME_9: l_sTxt = "How many animals can you think of that begin with the letter M? Ask someone else and see who thinks of the most!"; break;
//case THEME_10: l_sTxt = "shoes..."; break;
case THEME_11: l_sTxt = "What’s your favourite bedtime story? Can you read it to yourself?"; break;
case THEME_12: l_sTxt = "Have you ever moved house? Why not ask a grown-up about a time when they moved house?"; break;
case THEME_13: l_sTxt = "Have you cleaned your teeth today? I hope so! How many toothbrushes are there in your bathroom?"; break;
case THEME_14: l_sTxt = "What was the last film you saw? Do you have a favourite? Ask a grown-up to tell you about their favourite film!"; break;
case THEME_15: l_sTxt = "You can draw your news too! Draw a picture of what you did today!"; break;
case THEME_16: l_sTxt = "Have you ever baked a cake? Cooking can be fun - and if you make something delicious, that’s definitely news!"; break;
case THEME_17: l_sTxt = "Fruits make great drinks. How many different fruits can you think of that you can drink?"; break;
case THEME_18: l_sTxt = "You can do lots of different things at the beach. How many different things can you think of?"; break;
case THEME_19: l_sTxt = "Can you see any trees outside the nearest window? How many can you see?"; break;
case THEME_20: l_sTxt = "Why don’t you make your own boat and see if it floats in the bath?"; break;
return l_sTxt;
Any help would be extremely appreciated.
Thank you,
Ginger

If you have not upgraded to version 7 you should do that.
If you have upgraded to Version 7, be sure to do the updates to 7.0.5
Go to the Help menu and select 'About Adobe Presenter' to see what version, if it is 7.0, to 7.0.2 you need to update it
drop down the help menu again and you will see an 'update' option.
you need to install in order - 7.0.1, then 7.0.2 then 7.0.5 - you cannot install all at once
another thing you might want to do is open the file you are working on in 7.0.5 snd save it out with a new filename in a new location to combat that pesky problem of the 'media.ppcx' file disappearing....

HT3918 what is the beep sound when turning on computer after replacing ram

what is the beeping sound when turning on imac after replacing memory/RAM ?

This is the RAM capabilities and specs:
Maximum Memory
16 GB
Memory Slots
4 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM
This link, How to remove or install memory, will provide the source to how to install RAM in your model to be sure you do it properly. The modules need to be pressed fairly hard to assure they are properly seated.

Iphone 3GS has "169..." IP address after replacing old Airport Express

My 3GS is no longer connecting to my home network after replacing my old airport express.
Previously my old G5 iMac would have problems connecting to the old airport express, BUT my iPhone 3GS would reliably connect.
After installing this new airport express, my iMac is on the network, but NOW my iPhone 3GS is experiencing the same problem my iMac previously had: IP address changed to 169.254.205.191
Airport Express is set to WPA2 Personal
Updated firmware on the Airport express
Network settings on iphone have been reset several times.
Airport express has been rebooted several times.
Please help. Thank you.

Thnx William but that is not the case coz all other devices(laptops, desktops, PS3...etc) r working just fine.
after alot of time trying to figure out what the problem is I figured out the problem but cant seem to sove it:
I have three router in my network one acts as a DHCP server (router 1) and the others act as AP, they all brodcast wirless (SSID) based on the internet connection coming from router 1, all devices including my old iphone 3g connect on all three router no problem and get assigned an ip address within range 192.168.1.~, however when i connect my 3gs to router 1 (DHCP) it works perfectly and connects to the internet but when I connect to any of the other routers I cannot have internet access and it takes a long time to show the wi-fi symbol (3 bars), I managed to overcome this by giving my second router another network IP i.e 192.168.2.~ and made it aother DHCP server (but another network) that way my 3gs connected just fine like the 1st router, the problem with this solution is that I am on two seperate networks but same internet feed so I cannot communicate between lapto, desktop, PS3...etc
I guess I have two options:
1- wait for an update for 3gs hoping this could be solved and keep my network as is.
2- assign three different networks just for 3gs to work and sacrifice my whole home sharing.
SOOOO Pleaseeeeee if anything know anything or could help me in anyway please and post, is it just me or have i heared alot of Wi-Fi problems with 3gs!!!

T3: After replacing PSU, id read u1pcu1 is blank

Similar Messages

Maybe you are looking for