T3+ volume slice issue

I have two new T3+ arrays setup as separate systems
Both have the same issue. Both have the latest advised release of the T3+ firmware.
I set them to be a Raid 1+0 mirror (4 drives mirrored
to 4 drives) with striping across all "4" drives. The nineth drive is a hot spare.
I then setup the new Volume Slicing and divided the large 250GB or so virtual disk into muliple 36 GB virtual subdrives. The last "subdrive" in the T3 falls short and ends up being around 24GB. I fdisked all the drives and broke them into standard slices for what I need.
I rebooted my solaris 9 ue420 and it sees all the "drives". I can format all the 36GB drives. When I format the 24GB drive, I get back an error message about mismatching disk geometry and the format aborts. The format on any subdrive never takes more than a second
because the T3 basically overrides the function, but usually I can do a worst case verify on the subdrives
Obviously what the T3 controller is reporting back to
the OS does not match what the drives geometry
really is and things dont match right.
I am trying to avoid the software overhead on my UE420 of Veritas or Online Disksuite volume managers for these arrays and want to have the
sparc processor in the T3 handle all the mirroring and volume slicing of the 72GB drives in these arrays.
Anyone seen this type of issue before with a volume slices T3 array?
(this has also been cross posted on the Talk to the sysop forum. apologies in advance for the redundancy)

Bought my T3 about a year ago, and now i have this horrible volume fluctuation problem going on.. So I really wouldnt recommend buying it, even though the sound from the speakers is pretty good.
My last pair of creative speakers had the volume knob problem, this set of speakers has the knob problem. Last time i will ever buy creative speakers because you can forget about support fixing it...

Similar Messages

  • 5s Volume control issues

    Anyone having volume control issues?  My wife's 5s (less than a month old) is having issues with the up volume.  If she mutes it using the down volume, it won't go back up.  I can get it to work if I hold the volume a long time and it eventually comes back.  Or last time i had to remove her case, hold the volume and release several times before it finally kicked in.  Any thoughts or ideas?  Thanks.

    Hi,
    Please test in other computer to see if the issue persists, it may be caused by the bad output channel.
    But for better solution, I recommend you go to MSDN forum for further help.
    http://msdn.microsoft.com/en-US/
    Thanks for your understanding!
    Regards,
    Ada Liu
    TechNet Community Support

  • Secured WebDAV Mounted Volume Authorization Issues

    I use a secure WebDAV mounted volume from myDisk.se and up until the latest Security Update have had zero issues being able to manipulate files and folders as I would on a normal volume. However, since the installation of the Security Update (2009-004 (PowerPC) 1.0) I find weird things happening with this mounted volume:
    1) I am able to mount the secured WebDAV share using my security credentials.
    2) I can create a default "untitled" folder but when I try to change its name, the WebDAV authorization dialog pops up and despite entering the same credentials (why, I am not sure as the volume has already been properly credentialed in order to be mounted), access is denied.
    3) Trying to create a file within a folder on the mounted WebDAV volume I previously created pre-update causes the same authorization issue.
    I have no other WebDAV shares I can try to mount from any other companies so I am not sure if this is a myDisk issue or one borne from the Security Update. I am not a .Mac/MobileMe user and that info is not filled out in System Preferences. The internal hard drive has been meticulously maintained with Disk and Permissions repair being run both before and after each and every software update installed. Likewise, the volume's structure is also checked both before and after and shows no need for repairs.
    Any ideas? Perhaps there is a corrupted file somewhere that's affecting the authorizations needed by this third-party WebDAV volume?
    The machine that has this problem is the last model iBook G4/1.33GHz 12" display, 1.5GB RAM, and a 100GB 5400rpm HD which replaced the stock OEM 40GB 4200rpm drive about one year ago.
    I'm not willing to do an Archive and Install at this point as the loss of the WebDAV access to my online volume is not critical. Inconvenient as heck but not to the point where I'm willing (or able) stop my normal work to spend the hours it will take to get WebDAV access back.
    Thanks in advance for any insights.

    same problem here with webdav, I can't mount my idisk from university network on Mac Pro 10.5.3 (although it mounts fine from home network on both ibook and PMG5 10.5.3). Everything was fine with 10.5.2 and I already re-installed 10.5.3 combo. Other bugs as well with .Mac prefs (keeps crashing, sometimes it shows the available space on idisk but still no mounting, with error -35 or -8086), but .Mac sync is OK
    Jun 11 12:34:21 webdavfs_agent[579]: mounting as authenticated user
    Jun 11 12:34:22 kernel[0]: webdav server: http://idisk.mac.com/[username]/: connection is dead
    Jun 11 12:34:22 KernelEventAgent[75]: tid 00000000 received VQ_DEAD event (32)
    Jun 11 12:34:22 kernel[0]: webdav_sendmsg: sock_connect() = 61
    Jun 11 12:34:22 KernelEventAgent[75]: tid 00000000 type 'webdav', mounted on '/Volumes/[username]', from 'http://idisk.mac.com/[username]/', dead
    Jun 11 12:34:22 kernel[0]: webdav_sendmsg: sock_connect() = 61
    Jun 11 12:34:22 KernelEventAgent[75]: tid 00000000 found 1 filesystem(s) with problem(s)
    Jun 11 12:34:22 kernel[0]: webdav_sendmsg: sock_connect() = 61
    Jun 11 12:34:52: --- last message repeated 1 time ---

  • Network Volume Permissions Issue

    I am having a couple of issues with my "Data" external HD volume that I've setup as a poor-man's NAS (attached via USB to my AirPort Extreme)..
    1. Lately I have been experimenting with the various media players for OS X and seeing which one works best for me (VLC, Perian + QT, and Plex). So I selected a random *.m2ts file (from a BD-rip) and then "Cmd + I" to "Get Info" for that movie. In the "Open With" drop-down menu I selected "Plex" (as Plex seems to do a better job streaming than VLC for this one particular mpeg stream file), and when I tried to change it to Plex, it reported that I could not change all files to open with such a program (which is what I was used to being able to do). I thought that was weird as I've always been able to "Change All" in the past. See screenshots for some visual cues.
    As you can see below, it says "you have custom access," and I don't even have an option to "Ignore permissions on this volume"
    I try to add a new user/owner, and I can't. Says "that name is not valid"
    Then out of curiosity i tried to see if the subfolders in that volume are similarly jacked. yes they are!
    I also noticed that I have read-only access, even if I am actually the "(unknown)" user that suppossedly has read/write abilities. Not sure if that is me or not. Now when I disconnect the "Data" volume from my Time Capsule and plug it in via USB to my MacBook, all is fine and dandy -- i can read/write, change permissions to whatever, ignore permissions on that volume, change default apps, etc.
    It is almost like OS X doesn't realize that I an the owner of that external drive or something, so it tries to lock me out.
    I tried some random "chown" terminal commands like the following, which i found browsing macrumors or something. Note that when I tried the second phrase, it said "chown: /Volumes/Data: Operation not permitted" Dang. So i think that this particular terminal sequence (which seems to have solved everyone else's problems in the past, will certainly not work for me). I even tried telling it that I am the "root" user, but I don't remember the command.
    sudo chflags 0 /Volumes/Data
    sudo chown 0:80 /Volumes/Data
    sudo chmod 775 /Volumes/Data
    sudo chmod -N /Volumes/Data
    Here is some Terminal info, if it helps:
    sddacraig13:~ Anthony$ ls -la /Volumes
    total 8
    drwxrwxrwt@  6 root     admin   204 Oct 31 16:44 .
    drwxrwxr-x  31 root     wheel  1122 Oct 24 15:28 ..
    drwx------  19 Anthony  staff   602 Oct 31 07:06 Data
    lrwxr-xr-x   1 root     admin     1 Oct 31 06:19 Macintosh -> /
    drwxrwxrwx   0 root     wheel     0 Oct 31 16:44 MobileBackups
    drwxr-xr-x   1 Anthony  staff  8192 Oct 24 21:01 Windows
    sddacraig13:~ Anthony$
    Any issues you guys can think of? I did clean install OS X AFTER I had originally created the USB volume "Data," but my username and everything should still be the same... I think maybe my computer name may have changed (necessary for a school thingy).
    Help! I'd like to be able to write to the volume while it as attached to the network...

    This fixes just the symptom.
    The cause is driving me nuts.
    Whenever there is a little network problem (out of hands because of ISP)...
    I looses my Volumes, which is still somewhat acceptable.
    What is not acceptable is, that spotlight and whatever apps mean to write something onto my shares and whenever they are not available new folders are added under /Volumes/ShareName and so fourth.
    I am tired of fixing it manually.
    Because when I reconnect to my shares they'd be added as /Volume/ShareName-1 then as ShareName has been created by Mac OS X natively for some Reason.
    In the beginning I thought my Backupsoftware does that, or Amok Exif Sorter or whatever else Application... but shouldn't be the Standardprocedure for creating and writing data that if the folder is not found to interrupt with an exception/error or whatever.
    I find it not a very amusing practise to clean up the Volumes Folder every now and then for it gets spammed with rogue mountpoints that are in reality just directories locally for the real share was missing at the time something tried to write to there...
    Whenever I miss out that that happened data gets corrupted and I have to clean up the data massup by finding the differences amongst and getting the newest Version etc...
    I've been reading a lot of people having this problem and everywhere is described how to clean up the mass but nowhere how or when to fix the issue that it starts with, I mean stopping Mac OS X to create duplicates on its own not being asked to do so....

  • Volume Control Issue (Satellite L505D-S5983)

    My laptop: Toshiba Satellite L505D-S5983
    So here's the issue:
    Just recently I've started having problems using my volume control located next to the SD card reader slot.. You know, the volume 'slider'. It's been acting rather strangely, when I try to adjust my volume it doesn't change at all from the current volume percentage that it's at... Even when I'm sliding the slider. So then, I have to go into the manual volume in my hidden icons menu to change the volume. However, after I go through this step, I am then able to use my volume 'slider' control, and it actually works. 
    So, I'd like to know:
    A) Why this is happening?
    B) Am I able to fix this issue?
    C) How would I fix this issue?
    ox♥Scairry♥xo

    Still in need of a response.
    ox♥Scairry♥xo

  • ITunes volume control issue?

    Ever since I updated my Mac to iTunes 8.2.1 I've noticed that the volume control in iTunes is fixed on about 40% volume. I can drag the control up or down and it changes the volume but it snaps back to where it was when I let go. I can still change the volume on my Mac but it won't go as loud as it could. Any ideas?

    Hey tvas22,
    I will do my best to assist you  in the hopes of resolving the issue with the sound button. The steps that I would start of with first, would be to do a hard reset. I have included the document Performing a Hard Reset or Forced Reset.
    If you are still experiencing the same issue, I would set the communication level to do nothing in the Playback devices option. I have included the steps below for you to follow.
    1. Right click on the Sound icon in the System Tray
    2. Click on Playback devices
    3. Click on Communications
    4. Click on Do nothing
    5. Click Apply, and close the Window
    The next step to do if you are still experiencing the same issue, would be to perform a clean boot on your Split. I have included the document Using Microsoft System Configuration (Windows 8). See if following these steps you are still experiencing the issue.
    Please let me know the outcome of these troubleshooting steps.
    Best of Luck!
    I worked on behalf of HP

  • IPod Nano 6th Generation Volume Button Issue

    The "-" volume button on my iPod Nano 6th generation is stuck in the "on" or depressed position against the case. It looks like the button either is binding against the case, or a spring-like mechanism beneath the button is broken.
    Any ideas on how to fix the issue short of taking it in for a service appointment?  Maybe by opening the case?
    A

    If you open it or have a 3rd party repair site work on it you will no longer be eligible for an out-of-warranty replacement from Apple at a price of $65/$75 (make a Genius Bar appointment before going.
    You can buy the switch and replace it but be sure you are up to it. Check http://www.ifixit.com for teardown instructions.

  • Slices Issue

    I believe my issue has something to do with page tiling or page setup of some sort. When I go to make a slice it is like I am hitting a boundary that won't allow the slice to be the size I want it to be. The artwork is inside the art box but there seams to be some sort boundary inside the art box that won't allow me to make my slices. How do I stop this and be able to slice what I want. I tired hide bounding box and page setup but its not working. HELP!

    Set your document settings to 72dpi. Sounds like you are working at print resolution and exceed the pixel dimensions supported by the web tools.
    Mylenium

  • SAP BEST PRACTISE BI-Purchasing Volume Dashboard issue

    Hello,
    I am working on Purchasing Volume Dashboard (from SAP BEST PRACTISE BI package), I adapted Crystal Reports sources of this dashboard so that they connect to our local database and successfully generated the Export.xls, I Imported this Export.xls file into Purchasing Volume Dashboard.xls, added and configured Live Office Connections (ticking"Refresh before components are loaded" for each Live Connections.
    The issue is that when I click on PREVIEW the four components (Charts and Scorecard) don't refresh simultaneously.
    I have to click once on REFRESH button to have the first component refreshed with data then to click again to have the second component refreshed then click again and again !
    I don't understand why those components don't refresh in the same time !!
    Did one of you ever encountered this issue ?
    many thanks for your help,
    Regards
    Christiane

    Hi,
    Make sure your web service URL correct in Live Office connection and also in Xcelsius data manager.
    Did you check all connection in refresh button proprties? you may try selecting "Refresh after component are Loaded" in Refresh button properties Behavior tab.
    I think Xcelsius refresh are serial refresh so it may be possible that first component refresh is still in progress but you are expecting other component to refresh.
    Click on "Enable Load Cursor" in data manager's Usage tab, it will give you visibility of refresh. If anything refreshing you will see hour glass.
    Cheers

  • 6G iPod Nano Volume Spike Issue

    I tried checking the thread on this matter but could not find any discussion on it.  I noticed that there is a sudden spike in volume particularly when switching from one song to another.  This can happen when double clicking any iPod compatible earphone (or even Apple's own) controls.  It does not always occur with every track but occurs often enough about 30% of the time.  Is anyone encountering any of this issue.  I did not encounter this problem with my last gen iPod using the very same playlist.  Thanks all in advance.

    Are all of the tracks on your Nano encoded in the same format?  Are there any EQ settings enabled?
    Ideally, it would be nice to sync these tracks to another 7G Nano to determine if it's an issue with your particular Nano or not.
    B-rock

  • Odd volume stuck issue.

    Alrighty I've had my iPhone 4 in the UK for around a week now and all in all I have no real issues with signal nor battery life (apart from that skype uses more than it did on my 3G). My only problems were getting o2 to activate it, the proximity sensor (I hang up on everyone) and a strange volume issue. Well my phone is now active and I know apple are looking to fix the proximity sensor in an update to the OS.
    My problem is a strange combination of when using the iPod app watching YouTube/online video and making voice calls normally and on skype in some order the volume for everything gets stuck at maximum and stays there. The volume buttons show the volume graphic and I move it up and down with no affect on the actual volume. In videos and iPod I can slide the volume control again no affect on the volume, so then I restart the phone and voilà back to normal. Thing is now I'm having to restart it once or twice a day due to this issue.
    Has anyone else experienced this and has there been anything from apple on this? I couldn't find anything and to my mind I can see it being nothing other than a software issue because of the series of events needed to cause the issue.
    Many thanks.

    Hi,
    Yes, I do have same problem, as mentioned in http://discussions.apple.com/thread.jspa?threadID=2541233&tstart=0. My volume does not get stuck at max but somewhere in the middle. Everything else is the same, it looks like it works but it don't change volume, although slider on screen goes up and down. After phone restart, everything goes back to normal. I also have 16 gb model iPhone4.
    Dusan

  • Irregular slice issue

    I am fairly new to web design and struggling a bit to put flash into the off-white background area.  My issue seems to be with "slicing".  Can you slice the white area and replace with flash or is PS unable to irregularly slice?

    You could make a slice which includes the overhanging blob but first turn off the background layers so only the header remains on a transparent background. Next, save for web and devices as png-8 which will include the transparency.
    Alternatively, you could construct the overhanging header using CSS instead of a graphic. A rough mock-up is shown here: http://jsfiddle.net/4MuUe/7/
    Whichever route you go, be sure to browser-test the layout (which I haven't done with this mock-up). A quick web search shows there is a whole can of worms with cross-browser support for z-index and flash object embedding. Some of them can be fixed by adding "wmode" "opaque" to the parameters, but I'd need to do more research to give you a full answer.
    Message was edited by: ja3754
    Updated the link for better cross-browser support.

  • Ipod shuffle 3rd gen volume control issue

    I have IPod Touch and IPod Shuffle 3rd gen and I bought a new pair of headphones in the Apple store in London few months back and the headphones were totally fine when used in IPod Touch. Yesterday I put them into my IPod Shuffle and I am experiencing a problem with the volume - I can't put it up or down.
    It's not the "limit volume" thing, I already tried that...
    Any suggestions..?

    Hey paralelopipak,
    Thanks for the question. After reviewing your post, it sounds like the headphones have a volume problem only on this iPod. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Resetting iPod shuffle
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Volume control issues in iOS6?

    Hi, I have a Iphone 4S and have never had any volume issues while listening to music until I upgraded to ios6.
    Sometimes when I use the increase volume button (pressing it only once) it keeps raising the music volume to max, and this has
    deafened me a few times. I'm wondering if this is a bug in the new software update or a hardware issue. Any feedback would be great, thanks!

    Try rebooting the phone by holding both the power and home button until the apple logo appears then wait for pone to restart. Try sound again

  • Disk Utility Volume name issues in 10.10.1

    Hi
    I recently updated to 10.10.1 in the hopes that it would resolve the wi-fi issues, which it only partially did. Disregarding that, I did a usual disk verification that I tend to do after each major upgrade, and found that while verifying, the details box showed the volume name as what I believe to its unique identifier instead of its volume name.
    So instead of showing: "The volume Macintosh HD appears to be OK"
    It instead shows: "The volume (long string of numbers and letters)-(three shorts string of numbers and letters)-(a final long string of numbers and letters)" appears to be OK
    I'm wondering if anyone else has encountered this, or if anyone knows if this is a problem.
    Thanks

    hello,
    my personal opinion is that the Tasks part in BlackBerry10 serves only one purpose: bring compatibility with Outlook/Lotus through BES connectivity.
    If your device is not linked to a BES server, I strongly advise you to look at the dozens of free and paid apps that manage tasks with much more efficiency than the Remember app.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Maybe you are looking for