T30: can't enable Standby and Hibernation

I have installed a fresh copy of WinXP SP2 and most essential drivers (including all power-related drivers I could find from IBM for T30).
Windows reports that neither Standby nor Hibernate are supported by the system. How can I enable them?
Solved!
Go to Solution.

I do have WinXP on T30 but Standby and Hibernation are working...
Did u check the Control Panel power options?
If you fool me once, shame on you...
If you fool me twice, shame on me!

Similar Messages

Does Captivate requires Tin Can to enable tracking and viewing in iPad?

Hi Guys,
I'm using Moodle 2.6 then upload Presenter SCORMs.
I need to know if Captivate SCORM supports tracking in iPad.
I'm an Articulate user. Articulate requires Tin Can to enable tracking and viewing in iPad.
Does Captivate requires too?
We need your advise on this.
Please help.
Thank you in advance.
Best Regards, Erwin

Hi Jorma,
Thank you for the fast reply and your attention . I really appreciate it.
That's what we are trying to do now. I hope SCORM will work for iPad specially on tracking activity like graded quizzes and course viewing completions.
I'll update you with the developments. It's a fact that eLearning now a days is evolving to advance learning environment.
Again thank you for your time.
Best Regards,
Erwin

Standby and Hibernation on Libretto

My libretto U100 will not wake up after going to standby or hibernation. Has anybody else had this problem, and if so any suggestion on how to rectify it?
Any help would be appreciated.

Hi Anthony
I have checked all options on my friends Libretto and everything works fine. I have also checked all options in Power saver tool under Setup Action tab (Manual setup).
Is your unit preinstalled with Toshiba recovery media?
Try to remove power saver tool and install it again.

Standby and hibernating problems

Hi,
This last week my computer has been acting crazy.
First problem, if I put the computer into standby, when I return it wont come back. None of the windows screens appear the screen stays black.
Second problem, if I put the computer into hibernation, when I try to awake it it does ~50% of the time. But the next time I turn on the computer a black screen appears and says something like : An error occurred during startup and it gives me 2 options 1) delete restoration data and start or 2) start windows or continue start up (something like this) If I choose option 2 the computer screen goes black and nothing further happens. If I choose option 1 the computert starts normally.
Any suggestions would be greatly appreciated
cd151

install lastest graphic driver from http://www.ati.com
install driver for monitor

T60 won't resume windows xp properly after standby and hibernation - shows only blank desktop

Hi
I've got aT60 195CTO which is still just in warrantee that when I hibernate or standby the laptop and when i resume it'll ask for a password after the normal wait but then it'll just sit there show desktop background with no icons etc and periodically show hardrive activity but nothing happens, the touch pad pointer works ok but nothing else, even ctrl alt del failed to do anything, have downloaded and installed all xp updates inc sp3 as well as thinkvantage updates everytime this happens i'm forced to shut down computer by holding power button and restarting this is very annoying and always has the possibility of loosing work.
There appears to be two power management schemes in operation?, one running under xp and the other under thinkvantage - not sure if there is a conflict here? I have tried going into hibernation by closing the lid, fn-F12, xp's shutdown menu and entering hibernation from the thinkvantage menu all with same final result.
I have found a number of other postings on the net about this same problem but but apart from reloading the os which failed to solve the problem no other advice appears to be available.
would really appreciate any advice from anyone who knows how to solve this problem.
Regards
Paul

No Not really had some success though completely uninstalled graphics card software and reloaded new software also found out that it was the XP wireless software was doing something when connected to my school network so quick fix was turn wireless off then log into computer then turn wireless back on to resolve this cause I always forgot to turn it off I set up the lenovo wireless manager this worked and will only periodically do it (though I never really turn my computer off unless upgrading etc and sometimes it clogs up) another problem with mine was the battery could have been a issue cause I never turned it off and let it discharge (I wouldn't t recommend doing that unless battery is in warranty) first time I did discharge it it would not recharge so I may have had a faulty battery heard about the non-rechargeable coin battery maybe another member could confirm that? This could have been contributing to the issue
Hopes this gives u a variety of solutions to try help desk at lenovo had no idea when I told them about it and couldn't do much but tell me to update bios if it continues I suggest u ask it to be looked at and before warranty expires
Just received new 9 cell battery today will update to see if that was the issue

T60 won't resume windows after standby and hibernation

Hey guys first post this is the first thing thats gone wrong with my laptop which i can't fix myself this problem may be because of another problem but i'll tell you the symptoms and probable cause i need help with fixing it ok.... i'v got a t60 6369-A56- i'll hibernate or standby the laptop when i resume it'll ask for a password after the normal wait but then it'll just sit there show desktop background and perodically show hardrive activity but nothing happens i'v left it like this for 8 hours still no start up. it could be a problem with the graphics card driver i updated the driver but it came up with the error of "dwmapi.dll" could not be found the screen also turns off then on again periodically will work is being done everytime this happens i'm forced to shut down computer by holding power button and restarting this is very annoying and always has the possiblity of lossing work
thanks if you can help
Mitch
Message Edited by mitchelldarragh on 06-18-2008 03:15 PM

No Not really had some success though completely uninstalled graphics card software and reloaded new software also found out that it was the XP wireless software was doing something when connected to my school network so quick fix was turn wireless off then log into computer then turn wireless back on to resolve this cause I always forgot to turn it off I set up the lenovo wireless manager this worked and will only periodically do it (though I never really turn my computer off unless upgrading etc and sometimes it clogs up) another problem with mine was the battery could have been a issue cause I never turned it off and let it discharge (I wouldn't t recommend doing that unless battery is in warranty) first time I did discharge it it would not recharge so I may have had a faulty battery heard about the non-rechargeable coin battery maybe another member could confirm that? This could have been contributing to the issue
Hopes this gives u a variety of solutions to try help desk at lenovo had no idea when I told them about it and couldn't do much but tell me to update bios if it continues I suggest u ask it to be looked at and before warranty expires
Just received new 9 cell battery today will update to see if that was the issue

Can i enable BlueTooth and keep my headphone output?

well, the header says it all...
Bouke

No, the header really doesn't say it all. Enabling Bluetooth doesn't do anything except turn on the Bluetooth transceiver in the iPad. You could leave it on all the time if you wanted. You might see a slight increase in battery use but nothing else. You could still plug wired headphones in and use them. So, i'm guessing your question is more about pairing and connecting something to the iPad. One od the few things you can pair and connect to an iPad by Bluetooth is a keyboard. And yes, you can pair and connect a Bluetooth keyboard to an iPad and still use wired headphones.
Best of luck.

How can I enable, disable and re-enable restrictions on an ipod without loosign all the settings?

I purchased an ipod touch for my 10 year old, primarily so she could use the calendar and timers and such for school (we homeschool) and al;so so we could start learning some social media and electronic literacy.
I enabled all the restrictions on the thing (and set all the little settings how I wanted them) so she is essentially locked out of everything that I don't' want her to have access to yet. Then, I realized that I needed to download some stuff, and re-configure some things, so I just disabled the restrictions. When I went back to the restrictions to re-enable them, I found that ALL THE CHANGES I had made, dialing in what she should be able to access and not had been reset to the factory settings, and I had lost it all.
Do I really have to re-set-up the restrictions every time I enable or disable them?
Also, does anyone have a work around for the family thing requiring a credit card. We simply do not do credit cards in our family. Do I have to set up her apple ID and lie about her age, or is there some workaround for this?
THanks

try if this script works for you:
iTunes Track CPR v1.3
This script attempts to locate the files of so-called "dead tracks"--iTunes tracks designated with (!)--that you assume are not actually missing but are still located in the iTunes Music folder in their "iTunes File Order" (Music -> Artist -> Album -> file.xxx)."

Can't enable Voice and Data LTE

When I try to enable it I get an error popup that says "Cannont activate LTE Calls: To enable LTE calls on this account contact Verizon"
Is this a common issue? I'm trying to avoid having to go through the phone system process.

That did the trick. Thanks! It seems to be called HD Voice now and you have to go and add it under the Free Products option.
Not very user friendly. The phone even came with a startup sheet that told me exactly how to do this on my phone, but said nothing about having to go through these online menus first. Why this isn't just activated by default I don't know.

Cannot go into standby and hibernate on x61 with winxp

I installed winxp on the x61. Reinstall all the drivers (wireless and power management ... ). I enabled standby and hibernate on winxp. But cannot hibernate and go into standby. Everytime, i try standby, the laptop just shutdown and when I resume the laptop just power on and start winxp. I try standby using th Fn key and also closing the lid. I try uninstalling the drivers and reinstalling the drivers. I cannot resume after hibernation. i get the BSOD when i try to resume after hibernation.
Seem like some people in this forum have similar a problem. Do anybody have a solution or suggestion?
Thanks,
Wayne

Hello there
My problem is quite different, and that´s why I might confuse de topic so apologies in advance.
Well the problem goes like this: a X61 WinXP pro, SP2 doesn´t go to standby or hibernate only on the docking station. Meaning that to make the options work I have to put it in the docking station, restart and the options are available. But after one restart disconnected from the docking station I get standby grayed out.
Tried almost everything, display driver update, chipset update, sonic DLA uninstalled, PM update for the battery, disabling all devices, page file increased, ... I don´t even remember all the stuff tried but nothing.
Any ideas on what might cause this?
My only option is to try SP3 although from my personal experience SP2 is less problematic.
Thanks,
Misu

I've just enabled match and now my new purchases do not show up on my i tunes account. i can only play them buy going in to purchased playlist.

I've just enabled match and now my new purchases do not show up on my account. I can only access them buy going into purchase playlist?

SADLY not as i downloaded an upgrad to my original PAGES/
i have in the meantim had to open www.icloud. then from there import the file that i am working on and then check on ipad if it uploaded/ yes it did.
but what a waste of time as it doesn not save any changes done automatically back in the cloud....
i am now downloading the new LION and hope that it will fix the problem
i cant find any other way. I was lead to believe that you wrote, it saved automatically, on to the cloud, you then opened anohter device in anotother country even, and the new file was there, waiting, in its latest version.......
and the same magic was supposed to happen in reverse.
It doesn't/
if i have to open a browser, go to www.icloud....why on earth did they not just leave us an icon to drop it in in that case?
I hope the new lion will help resolve the isssue/
any other ideas> keep em coming...thank you so much.

TS3280 How can i enable both paired bluetooth and ios keyboard input at the same time?

How can i enable both paired bluetooth and ios keyboard input at the same time?
This is needed for the app im working on. Need some user input via keypad as well as scanner input via a paired bluetooth scanner.

You probably should not be using a keyboard bluetooth profile for a scanner, I am not a developer for apple so do not know the location for you to find out the correct profile you should be using for an input device that is not a keyboard. Sorry,
I am sure if you navigate the apple developer site you will probaly finmd what you're looking for.
https://developer.apple.com

How can i change the setting on my ipad 2? Whenever i read stories in the net after awhile it goeson standby and i have to keep on entering the passcode. Please help.

How can i change the setting on my ipad 2? Whenever i read stories in the net after awhile it goeson standby and i have to keep on entering the passcode. Please help.

Settings>General>AutoLock>Never. Now it will not sleep at all so change it back when you are done reading.

I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same displa

I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?

More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed

I disabled my Macbook Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

I disabled my Macbook Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

How do you disabled it if running the same?

T30: can't enable Standby and Hibernation

Similar Messages

Maybe you are looking for