T3i mavericks - EOS Utility update not working

I recently upgraded to MAVERICKS. I downloaded and followed the instructions for updating eu2.14.10x-installer.dmg.zip but I am still getting the error message "cannot be used with this version of the operating system" ????

EOS Utility is now up to v3.x. You may want to update to the newer version.
I was on Mavericks using EOS Utility 2.13 with no trouble, but I am now on Yosemite and had to upgrade it to v3.0. When you install 3.0 it actually installs both the latest 2.x series (2.14) as well as 3.0. It seems to auto-decide which one to launch based on the attached camera. However... both EOS Utility 2.14 and 3.0 and they are with the new OS.
You might just want to upgrade to 3.0.
Tim Campbell
5D II, 5D III, 60Da

Similar Messages

EOS Utility will not work after update - 70D and Windows 8.1

I hope someone can help. I updated my EOS Utility on July 20, 2015, and switched to EOS Utility 2, incl. the updater (an add-on installation on the Canon site). After that, nothing happens when I connect the camera and try to open EOS Utility. I can hear (jingle) that the computer still recognizes the camera. Around that day, my computer also installed a Windows update. I have unistalled EOS and reinstalled it, both with and without the updater. Still nothing happens. Has anyone else had the same issue? On another forum, disabling wifi seemed to work, but I checked that wifi is already disabled (even by enabling and re-disabling it). Any ideas are gratefully accepted. Thank you.

You would be much better off to add an exception for the software you're getting a flase positive on, than to disable AVG. You can do this within AVG by looking for "Exceptions" under the "Advanced Settings" dialog (found in the Options menu). This is not uncommon and it just means there's some byte pattern in your file that is similar to a known virus. If you disable AVG you're opening yourself up to attacks while it's off. By adding an exception AVG will just ignore that file, and since you know it's OK, that's safe.

Updated airport utility will not work on older Airport Extreme

I have a mid-2011 Macbook Air with OS 10.9.4. So that's up-to-date. I recently updated my Airport Utility to version 6.2. I have an old Airport Extreme. The new Airport utility will not work with the old Airport Extreme. Apple will not let me download the older Airport Utility, because I have a newer one installed: classic Catch-22. Any ideas? I need to find out my SSID to connect with a new Denon AVR receiver. Is there any way to find out my SSID with Airport Utility?

You must first uninstall AU 6.2 before you can install an older version. This may be removed by the mods so get it while you can:
AirPort Utility 5.6.1 on OS X 10.9 Mavericks | Corey J. Mahler
Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is

Site list update not working with TED and Zenworks for Servers

Product: Zenworks for Desktops 7Sp1 and Zenworks For Server/TED 7Sp1HP5
Subject: Site list update not working with TED and Zenworks for Servers ,
all on Linux
Description: We have an exiting environment with 6 ZfS Servers and now we
brought up a new Server for another location. I configured all same as on
the other Server and the new one created all NAL-Apps at the new location.
But in the Application Site list on the golden App is this Application
missing. So I clicked on the Link up site list on the Distribution Screen
in C1. On ApplicationSite list the App from the new location is missing.
So I removed all and added the new from the new location and now i see all
in the application site list.When I install an app on the client on the
new location NAL is connecting alway th the same (wrong location-server
and i get an msi error 1612 or id=53272 with path=\Wrong serverpath to
file.
I looked on the other tab on C1 at the golden app an I see the backlinks
are going to all other servers without the new one. Software installation
on other locations are ok
Regards

Andreas,
I forgot to mention that you can also set the loging level on the Distributor and the Subscriber to 6. to do this at the Zenworks Server Management prompt type "setconsolelevel 6" if you want to capture this to the log file ted.log then use "setfilelevel 6"
Next delete the Distribution from the Subscriber and then re-push the channel.
What we are looking for here in the log is the creation of the object and the linking information about the gold object. it should look like this (not the failure part ;-))) )
In this excerpt you will see the entry
Golden App =
This should be were the link is to
You can check this both ways in the Golden App and in the Distributed Application.
Here is a log from me that shows this info as an example of what you should be looking for.
2008.05.29 03:35:41 [TED:Work Order In(yourserver.yes.com)] Receiving distribution: Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_YOURSERVER.BRN.FL.SUBS.SUBSCRIBERS.ZSM. GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Handle Event: Work order IN completed... Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Received (from haverhi-flbrn1.yesbank.com) Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..

Maverick's Mail does not work with Gmail ! it works better with iOS 7

For info.
I do know how it's complex to program and more for an OS System.
Maverick's Mail DOES NOT work proprely with Gmail boxes ? Gmail incoming or outcoming messages are correctly notified on my iPhone 5s with iOS 7. But not on my Macbook Pro retina (end 2012) with Mavericks. One update was suppose to solve the trouble.
Hope you'll solve the problem as soon as possible. Bur not during the nights. But during your daytimes' work !
Wish you nice end of year's days.
And please get my best wishes for 2014. Hope you'll get a lot of these nice little moments of happiness.
Best regards.
Pascal

Have you checked your incoming and outgoing mail server settings?
If you are using IMAP, it should look something like the following:
Incoming Mail (IMAP) Server - Requires SSL
imap.gmail.com
Port: 993
Requires SSL:Yes
Outgoing Mail (SMTP) Server - Requires TLS
smtp.gmail.com
Port: 465 or 587
Requires SSL: Yes
Requires authentication: Yes
Use same settings as incoming mail server
If you are using POP3, it should look something like the following:
Incoming mail server type: POP3
Incoming mail (POP3 or IMAP) server: pop.gmail.com. Google Apps users, enter the server name provided, don't add your domain name in these steps.
Port: 995
Outgoing e-mail server (SMTP) name: smtp.gmail.com
Port: 465
Outgoing server requires authentication: enabled

MBP 2010 Mavericks SATA PCI Card not working

Hello there,
with Mountain Lion I had no problems with my LaCie SATA II ExpressCard 34, but after installing Mavericks this card is not working anymore.
http://www.lacie.com/de/support/support_manifest.htm?id=10274
I contacted Lacie Support, they do not have an actual driver.
So I bought a Sonnett Tempo SATA Pro 6Gb ExpressCard/34 which should work with Mavericks.
Unfortunately my MBP from 2010 does not. Sonnett offers a workaround http://www.sonnettech.com/support/kb/kb.php?cat=466&expand=_a3_a1_a2&action=b778 #b778
After installing this I could use the card when I plugged it in AFTER systemstart. If the card is plugged in when the computer is started, the compter will not start at all. So, if I like to use an external drive as startvolume with this card, it is useless.
Does anybody have the same problem and any solution?
Will there be an update for Mavericks regarding this problem?
Thanks for Feedback

I can't offer any solutions, my MBP doesn't have an Expresscard slot, but it seems like no one else has answered so I thought I'd offer a suggestion. Contact Other World Computing at Macsales.com. They specialize in Mac hardware and may be able to supply you with a card that works.
As for the "will there be an update" question, we're all just users here so we have no idea what Apple will do.

Problem description: mac mail not opening, software updates not working, app store not opening. imac osx 10.9.5

Problem description:
mac mail not opening, software updates not working, app store not opening. 10.9.5
EtreCheck version: 2.0.11 (98)
Report generated 1 December 2014 16:51:49 CET
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
12 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1080
BenQ GL2240 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 1:32:17
Disk Information: ℹ️
WDC WD5000AAKS-40V2B0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (164.03 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
EPSON EPSON Epson Stylus S22 Series
Canon MX410 series
ASMedia AS2105 1 TB
S.M.A.R.T. Status: Verified
EFI (disk3s1) <not mounted> : 210 MB
Backup (disk3s2) /Volumes/Backup : 999.86 GB (506.24 GB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader 7.95 GB
S.M.A.R.T. Status: Verified
EOS_DIGITAL (disk1s1) /Volumes/EOS_DIGITAL : 7.94 GB (7.83 GB free)
Western Digital My Book 1140 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
2TB (disk2s2) /Volumes/2TB : 2.00 TB (1.50 TB free)
Wacom Co.,Ltd. CTE-450
Contour Design ShuttlePRO v2
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24217.979618) Support
[not loaded] com.parallels.kext.hypervisor (9.0 24217.979618) Support
[not loaded] com.parallels.kext.netbridge (9.0 24217.979618) Support
[not loaded] com.parallels.kext.usbconnect (9.0 24217.979618) Support
[not loaded] com.parallels.kext.vnic (9.0 24217.979618) Support
/Applications/Toast 10 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
[not loaded] xxx.qnation.PeerGuardian (1.1.9) Support
/System/Library/Extensions
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
WkSvMacX: Path: /Library/StartupItems/WkSvMacX
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS4ServiceManager.plist Support
[running] com.epson.epw.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist Support
[failed] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.barebones.textwrangler.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[not loaded] com.gopro.stereomodestatus.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[invalid?] com.tvmobili.tvmobilisvcd.plist Support
[loaded] fi.polar.libpolar.plist Support
[running] fi.polar.polard.plist Support
[failed] xxx.qnation.PeerGuardian.kextload.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[running] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[invalid?] com.plexapp.helper.plist Support
[not loaded] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
SmartDaemon Application (/Library/Application Support/CleverFiles/SmartDaemon.app)
SilverKeeper Scheduler ApplicationHidden (/Applications/SilverKeeper.app/Contents/Resources/SilverKeeper Scheduler.app)
Dropbox Application (/Applications/Dropbox.app)
Garmin ANT Agent UNKNOWN (missing value)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 11.5.7r609 Support
Google Earth Web Plug-in: Version: 6.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
PandoWebInst: Version: 1.0 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.0 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.239
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.0.0 Support
AdobePDFViewer: Version: 10.1.12 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: (null) Support
Safari Extensions: ℹ️
Open in Internet Explorer
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS4 Support
DivX Support
Flash Player Support
Flip4Mac WMV Support
GoPro Support
Growl Support
Java Support
MacFUSE Support
MenuMeters Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Destinations:
Back Up [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      12% Google Chrome
      12% WindowServer
      4% Dock
      2% Little Snitch Agent
      2% SystemUIServer
Top Processes by Memory: ℹ️
399 MB iTunes
322 MB mds_stores
216 MB Google Chrome Helper
193 MB Google Chrome
155 MB com.apple.IconServicesAgent
Virtual Memory Information: ℹ️
6.64 GB Free RAM
3.51 GB Active RAM
1.36 GB Inactive RAM
1.11 GB Wired RAM
1.91 GB Page-ins
0 B Page-outs

[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
Un-install according to the developer's un-install instructions.
You do not need to use cleaning programs. They can destroy your computer operation as they may already have done.
CleanMyMac - Uninstall
CleanMyMac2 Un-install
After un-installing, run this program to make sure you got all the pieces.
EasyFind – Spotlight Replacement
Do a backup.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.appstore.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Mac Book Software Update not working, iTune will not update because of that, iPhone 4 won't connect to iTunes because iTunes is not updated. Mac v.10.5.8, iTunes v.10.5.2, iPhone4 iOS 6

Mac Book Software Update not working (Software Update does not have any new software for your computer at this time), my current MacBook version is 10.5.8.
As a result I can't update iTunes, version 10.5.2 (This software requiers Mac OS X version 10.6.8 or later)
Now when I connect my iPhone 4, version iOS 6 iTunes can't connect to iPhone (The iPhone "XXXXX's iPhone" cannot be used because it requiers iTunes version 10.6.3 or later.)
so in a nutshell can't use iphone 4, because iTune is not updated and will not update because Mac Book is not up to date and will not update either.
Please help.
Thank you
bt465

Welcome to Apple Support Communities
Snow Leopard is a paid upgrade. http://support.apple.com/kb/sp575 Call Apple to buy Snow Leopard. Then, make a backup, insert the DVD and upgrade. When it finishes, open  > Software Update

Fingerprint utility is not working for normal users - Tecra M11

Hi All,
I installed windows 7 pro in Tecra M11 laptop and the Toshiba finger print utility is not working for normal users.
It is working only for domain administrators. The TFPU is not working for, normal domain users, local users, local administrators. If we run the utility it will ask to enter the windows password and once we applied the password then the message saying "entered password is not valid" will prompt even if we are trying to use the utility first time.
If we try with a domain admin account it will work without any problem. Can somebody help me to trouble shoot this issue?
Thanks.

People nowadays experienced that no matter How many times we glide our finger it have no response.In this instance, you might be very afraid of Windows password lost by reason that there is a plenty of important data on your PC.
Then what should you do? One choose is fix the Fingerprint scanners, but this method will cost a lot of money. The other is use the Windows password function to solve the problem. Certainly, this is a very safer, faster and easier to use method for you.
According my personal experience, you can try these three ways to re-access to your PC:
Method 1: Login with the default administrator account
* Step 1: Start Windows PC
* Step 2: When you can see the Windows login screen, press ctrl+alt+del keys Twice and it'll show Classic Login box
* Step 3: Type Administrator as Username and leave the password field blank
* Step 4: Press the Enter Key and then you can be able to login the default windows administrator account which is it created by default when install windows.
*Note:* This trick is only work for Windows XP. And when you input the key combination Please don't put the cursor on any account. And if you change the name or password before, you cannot login by this way.
Method 2: Use the previous password reset disk
This method describes how to create and use a password reset disk for a computer that is a member of a domain. You can use a Windows password reset disk to gain access to your Microsoft Windows Professional-based computer if you forget your Windows password. Please click here to learn more.
Method 3: Using Windows Password Unlocker
Using Windows password remove software is could be the fastest and easiest way for you to reset your Windows password while you didn't create a password reset disk before.
There are 2 options for you: recover Windows password with a bootable CD/DVD or recover Windows password with a USB flash drive.
Before starting, a bootable CD/DVD or USB flash drive and a computer with CD drive are required. (Internal CD drive and external CD drive are both OK.
Option 1: Recover Windows password by burning a bootable CD/DVD
Option 2: Recover Windows password by burning a USB flash drive
The whole Windows password recovery process can be divided to 3 big steps:
* >> Step 1: Burn a USB flash drive to remove lost Windows password
* >> Step 2: Set your target computer to boot from USB
* >> Step 3: Recover forgotten Windows password with the burned USB flash drive
In fact, all you need is a *Windows Password Unlocker www.passwordunlocker.com/windows-password-recovery.html which can help you directly reset your windows xp password, and then you can login your XP without a password required. Of course, there are also some other ways to do it, but this way may be most convenient one.

Disk Utility is not working for me.

I have had a nightmare trying to install a Boot Camp partition on my brand new 27" iMac with 3TB Fusion Drive and running 10.8.4.
When trying to use Boot Camp Assistant, it would start the partition, then not finish. I quit BCA, tried repairing both the partition and the disk, that didn't help either. So I went into Disk Utility to create a new partition with no file system on it, assuming I could just use Boot Camp Assistant to format it when the partition was created. It would start, but not finish. I tried Repairing the disk and the partition, neither helped.
So I booted with CMD+R, launched Disk Utility, and tried to create a 500GB empty partition. It started and just never quit, so I CMD+Q, got out of it, went back to Disk Utility, I found that I now have a 1.22TB empty partition and a 1.78TB Mac Partition. This is probably my own fault, I should have just let it run, but after 20 minutes, it wasn't moving.
I figured that would work okay, so I tried installing with BCA, but found it's looking for an HFS+ partition to resize and wouldn't work with an empty partition, so I figured I'd just format the empty partition as HFS+ and install with BCA. Unfortunately, I can't get Disk Utility to format the partition. I select the empty space, it puts a white block on it like normal titled Untitled 2, I select Mac OS Extended (Journaled), hit apply, something flashes very briefly over the "capacity" line, and then nothing happens. Hit revert and it shows up with the Macintosh HD partition and the empty partition. No matter what format I choose, nothing happens. If I try to exit, it tells me that changes have not been saved.
I'm trying to just extend the Mac partition, but the resizing option is not available. I can't drag it to cover the Free Space partition, I can't type in the Size to resize it by number, I can't do anything. I've tried to repair the disk and the partition, nothing happens. I can't reclaim the space no matter what I do.
At this point, all I want to do is recover the entire space of the hard drive for Mac OS. I'll try again with Boot Camp Assistant after Apple works the kinks out.
Any help would be appreciated.

The Boot Camp Assistant in 10.8.4 should be able to partition your 3TB+ drive so you can have Windows. If Disk Utility is not working then your disk is corrupt. Backup all your data using Time Machine. Erase the volume and restore from Time Machine backup. You can use the ‘OS X Recovery Disk Assistant’ (http://support.apple.com/kb/DL1433). Open Recovery Disk Assistant and follow the on screen instructions to create a Recovery HD on the external drive. When the Recovery Disk Assistant completes, the partition will not be visible in the Finder. To access the external Recovery HD, connect the drive, then restart the computer and hold the Option key. Select Recovery HD from the Startup Manager. You would need to re-install Mountain Lion up to 10.8.4. Then ran Boot Camp Assistant and then install Windows. Once you have confirmed that Windows is running then open up Migration Assistant (in the utilities folder) and migrate your Time Machine backup back on to the hard drive.

RAID Utility does not work after Vista upgrade

Hi,
I have a Qosmio G30 with 2 HD 120GB each. After I upgraded to Windows Vista from Windows XP, the Toshiba RAID Utility does not work anymore. In WXp it worked OK, but in Vista there is no way I can mirror the HD. That is, the utility itself work, but the button that should say Mirror, or something like that is not shown. I have set the drives to RAID-1 in the BIOS, but no go.
Is there any way to get the software RAID to work again?

Hi,
just a little question: While installing vista, did you installed the RAID-driver at installation time? Maybe this could be the reason why RAID cannot be activated properly.
Please give some feedback, if you installed the RAID drivers for Vista during the installation..
Cheers

Wireless OS Update - not working

I've been trying to update my BlackBerry Torch 9800 6.0.0.246 to higher version wirelessly but all it says - “Your BlackBerry is up to date.” The others we're able to update their smartphone but why can't I? I don't want to plug my phone to any computer using the cable connector because I'm afraid it would get virus and be ruined eventually. Please help..

Duplicate:
http://supportforums.blackberry.com/t5/BlackBerry-Torch/wireless-OS-update-not-working/m-p/2039115#n...
Answer provided there. Please avoid poly-posting the exact same issue.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

MOVED: MSI Live Update not working Windows XP Professional 64bit Edition!!!

This topic has been moved to Operating Systems.
MSI Live Update not working Windows XP Professional 64bit Edition!!!

Thank you so much. I just want to say I really appreciate when people do take the time to post me in return. So I really mean it, Thank You.
A quick question. You see, I have been upgrading my computer. I installed a Belkin USB USB Card (high speed 2.0) cause I needed more USB ports. Then I checked for compatable RAM and upgraded my RAM from 512MB to 2Gigs. Everything alright.
Now, I have checked for processors that are compatable with my board K9VGM-V (MS-7253). And MSI's chart says mine is compatable with the AMD Athlon 2x 6000 (3.0Ghz) *IF* I use the 89 watt and not the 125 watt. Here is a good URL for the processor details I found:
http://www.cpu-world.com/CPUs/K8/AMD-Athlon%2064%20X2%206000+%20-%20ADA6000IAA6CZ%20(ADA6000CZBOX).html
Now do you have any tips and I will probably have to flash to BIOS for sure after this upgrade won't I?

TS1394 Software Update NOT WORKING (Snow Leopard)

Software Update NOT WORKING (Snow Leopard)
Hi, I am currently using Snow Leopard 10.6 on my iMac. I opened iTunes and was told there was an update available so I clicked the button to download it. This obviously opened up the 'download' screen with blue bar. The blue bar does not move and the message comes up that the download failed. I have tried troubleshooting, but the message I get is that I am not connected to the internet - which I am.
Please help.

Check your iTunes version, it's reporting v10.6.3 here on 10.6.8 and no updates required.
You should be able to download it from here
https://www.apple.com/itunes/

I downloaded ox mavericks but it is not working on my mac air

I downloaded the OX Mavericks but it is not working. I still am using the old software. I dont know why the Mavericks is not working on my mac air

Did you install it? G to your Applications folder and look for an app called "Install OS X". It gets deleted after install, so if it's still there, you haven't run it yet. Launch that app and follow the directions.
Matt

T3i mavericks - EOS Utility update not working

Similar Messages

Maybe you are looking for