T400: auto reboot after poweroff

A confused problem occurs on my T400.
It automatic reboots after my t400 power off whatever I shut down by winos or I keep pressing the power button for a few seconds. I have updated BIOS to new latest version. I look up many web pages, but I couldn’t find out a way to fix it. Maybe my t400’s motherboard has damaged. Someone can tell me what problem has occurred on my t400.
moderator note: type added to subject line for clarity.
Solved!
Go to Solution.

Currently i have no new ideas what it could be, but i'll check, if i can find something. another thing about the "reboot" i mentioned before: it may be the automatic reboot from windows, because i find the thinkpad t400 sometimes looks like it is shutdown, although it's rebooting, just had the experience that i wanted to reboot and just thought for a few seconds "ok, is it now shutdown or rebooting?!?", because ALL status leds were off, just as you mentioned, and then the lights turned on again and it did the wanted reboot... don't want to offend, but i think it might be confusing in realizing that it's rebooting instead of "suddenly turning on again".
Did you look into the logs of windows, if there was an error or something like that while shutting down?
I just thought about if there's a bios option for always on on after ac power loss... i recently had some trouble with an other pc, which didn't shutdown and just went on and on again, because it seemed the bios interpreted the shut down as ac power loss... just an idea.
greetz
thefred

Similar Messages

Always auto reboot after update 4.3

im Z1 user from china, after update 4.3, auto reboot once a day,and yesterday i restore factory settings,but auto reboot also....>_<,help me please!

As per the above advice, please see a step by step guide below:
1. Download the PC Companion software from http://www.sonymobile.com/gb/tools/pc-companion/
and install it on your PC.
2. Install and open PC Companion then select Support Zone.
3. Phone Software Update.
4. Start.
5. Repair Phone
6. Continue
7. Accept data removal
8. Next
9. Wait for prepare
10. Select Phone
11. Follow the connection steps
Don't forget to mark posts that answers the topic as Accepted Solution.
If you find any post helpful, press Kudos.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Auto-reboot after 'installing' apps/upgrades to find after reboot app/upgrade HASN'T been installed..

Received my blackberry curve 9360 back from repair today, and due to the nature of the fault with my phone I was sent another device. Everything started up and was working fine, setup worked great and I upgraded to 7.1 and it was all fine. Then I went onto App World and downloaded the latest version which worked. However when I came to trying to download some apps and upgrades for instance the latest blackberry messenger upgrade, the installation would progress until it was complete and upon the installation bar reaching the end my device would reboot. After the reboot I find that the upgrade hasn't been performed and that it was never installed.. This keeps happening over and over again.. How can i fix this? it's incredibly frustrating as I can't upgrade or install any applications!
Thanks to anyone who can help!

Hey ChrisWatkins93,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
How much free memory is on the BlackBerry® Curve™ 9360 smartphone? Go to Options>Status to find this information.
To determine if this a operating system issue, I suggest following all the steps in this KB article: www.blackberry.com/btsc/KB11320
Then test out BlackBerry App World™ afterwards to see if the issue is resolved.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Xserve - Auto Reboot after power loss

I have an Xserve (All updated) in a server farm. Recently the farm lost power, someone screwed something up. The net result was the server lost power. When the power was restored shortly thereafter the Xserve DID NOT reboot automatically, as I expected it would. Once the power button was pressed, everything booted fine.
SYSTEM PREFERENCES/ ENERGY SAVER/ are set to RESTART AUTOMATICALLY AFTER A POWER FAILURE.
Why did this not reboot when the power was restored?
Is there another, more reliable way to ensure this works properly, Firmware Settings?
TIA

I am thinking maybe the power was still off when the Xserve wanted to restart?

Lion feature I wish to have in SL: auto reboot after KP

Hi all,
Is there any way to make SL auto restart like in Lion if it kernel panics?

There's no auto-restart from a KP in either SL or Lion. See
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

Disable Auto-Reboot after Zen For Desktop 6.5Sp1 Install

Hello everyone...
I am trying to automate the installation of about five applications. My
problem is that two of them want to automatically restart the computer
once the install is done and the ZfdAgent651 is one of the culprits.
Does anyone know how I can bypass the auto-restart of the Zen Works
install. I have tried the MSI command line switches, but cannot find one.
Any help would be great.
Garry B

gbargsley,
> I am trying to automate the installation of about five applications. My
> problem is that two of them want to automatically restart the computer
> once the install is done and the ZfdAgent651 is one of the culprits.
You can do this with a MSI property,
THis page explains this in detail
http://www.appdeploy.com/tips/detail.asp?id=27
The property would either be added as a command line switch or as a MSI
property in your application object
Jared Jennings
Data Technique, Inc.
Novell Support Forums Sysop
http://wiki.novell.com

TS3274 iPad 2 Auto-rebooting continuously after OS update to iOS 7

My iPad 2 is auto-rebooting continuously after OS update to iOS 7 . After every reboot , it is waking up for around 20 seconds and then rebooting again with apple logo coming on the black screen . I tried switch-off/on but the problem is still there . Please tell what to do .
PS : The iOS update was completed successfully . The General>Software-Updates shows "up to date iOS 7" .

I somehow managed to restore the ipad within 20 seconds time . I erased all settings and data by General>Reset>Erase-All-Settings-And-Data (simply reset settings did not work) . Make sure you have backup of your data (on iCloud or iTunes) before doing the previous step . Thank god , now it is working fine . *** Apple !!

Systemctl poweroff reboots system after poweroff

When I issue the command to poweroff the system
systemctl poweroff
the system seems to poweroff fine; after everything turns off including the powerbutton light, one or two seconds later, the system starts up again.
I don't know where to start debugging this issue.
Any help would be greatly appreciated!
Thanks!

I've noticed that my laptop doesn't reboot after I powerdown on battery; however, when I'm on AC power, it will reboot about 2 seconds after the laptop has turned off.

Thinkpad T400 reboot after post (right before boot)

After update bios to 2.03 i noticed, that sometimes my thinkpad reboots after post (right after system booting). First I ignored this issue, because i thought it's caused by vista cd in drive, so i was removing it and everything seemd to be fine. But now i know that this is compleatly cd-independed. It happens in almost every second boot, and is independed on boot priority or boot media (cd, usb, hdd). I tried to downgrade bios to 1.20 and 1.23, but it still happening.
If anyone know what is going on, please let me know. I'm little stressed.
I noticed one more think. After change to "diagnostic boot" in bios, after reboot I hear beep, which is clearly longer, than when reboot not occurs.
Message Edited by lucks on 03-02-2009 02:10 AM

This is still happening... but I think I've noticed some things.
I think what the problem is, and I'm sure this'll sound retarded, is Arch is restarting "too quickly". I say this because there are some times when reboot works properly. When this happens, I notice all of the hardware shut completely down for about a second. I hear sort of a "click" indicating to me that discs have stopped and power is off, like the very last sound you hear when you completely shut down a computer. Instead of a blank screen, I can tell the monitor is completely shut off. After about a second of this, everything comes back on, the Thinkpad splash screen appears, and then goes away and I am taken to GRUB. Everything is peachy.
When the reboot fails to work properly, however, I don't get that total shutdown "feeling".. no click sound, and my screen just goes blank, but not totally off. The Thinkpad splash screen reappears sooner, but this is where I hang and eventually get the error I reported in the original post.
I hope this additional info helps, as this problem is really annoying.

2011 Macbook Pro Retina Blackouts and constant Auto-Reboots

Hey guys, thanks for your time to look this through since you are my last hope before I drive 320 miles to Apple Store in Chicago with 14inches of heavy snow under my car...
Here is the case: it happened today that my computer would automatically go blackout, then auto-reboots itself. It happened multiple times that I can't do anything on it. And after its auto-reboots, the screen would go black. If I click the volume keys, or power key, I can still hear the sound of them, but the screen would keep black and the computer is actually working. Thus I have to hard-reboot it by pressing the power button for seconds. But even I enter the OS system, after some seconds it just happens again and again, both on the Mac OS Maverick, and my Bootcamp Win7, no matter the power adpater is plugged or not.
The weirdest thing is: I am now connecting the computer to my Viewsonic monitor, and the computer works perfectly: no blackout, no auto-reboots.
I went to the campus authorized Apple retailer, and the techician told me there is nothing he could do since he is not authorized to diagnose the problem since we both thought it is the hardware problem(on both systems.)
I have tried to reset my PRAM and SMC but none of them works. I haven't found anyone who has the same problem online, and thought my experience might helps someone who has it. And I hope we can figure it out before I drive to Chicago in such a horrible weather...
Thank you so much for your concern and help!

Hey guys, thanks for your time to look this through since you are my last hope before I drive 320 miles to Apple Store in Chicago with 14inches of heavy snow under my car...
Here is the case: it happened today that my computer would automatically go blackout, then auto-reboots itself. It happened multiple times that I can't do anything on it. And after its auto-reboots, the screen would go black. If I click the volume keys, or power key, I can still hear the sound of them, but the screen would keep black and the computer is actually working. Thus I have to hard-reboot it by pressing the power button for seconds. But even I enter the OS system, after some seconds it just happens again and again, both on the Mac OS Maverick, and my Bootcamp Win7, no matter the power adpater is plugged or not.
The weirdest thing is: I am now connecting the computer to my Viewsonic monitor, and the computer works perfectly: no blackout, no auto-reboots.
I went to the campus authorized Apple retailer, and the techician told me there is nothing he could do since he is not authorized to diagnose the problem since we both thought it is the hardware problem(on both systems.)
I have tried to reset my PRAM and SMC but none of them works. I haven't found anyone who has the same problem online, and thought my experience might helps someone who has it. And I hope we can figure it out before I drive to Chicago in such a horrible weather...
Thank you so much for your concern and help!

Solaris 8 in ultra 2 got panic and auto reboot when install Oracle software

Dear all,
I installed Solaris 8 by selecting 'Entire Solaris Software Group' and select 32 bit support only in an old ultra II machine. Then I tried to install Oracle 8.1.7 in the same machine but machine always got panic and started auto reboot when Oracle installed about 17% or 20% or even 70% (I tried install the minimum of Oracle).
What is the problem? Anyone can help?
Thanks in advance,
Vicky

I think you need to check the parameters like SHMMAX etc in /etc/system file as recommanded by oracle if not already added you need to add them .Oracle manuals have a list of these parameters and don't forget to reboot and boot with boot -r after adding these parameters.
Make sure you have sufficient memory or some patch recommanded by Oracle .
Hemant
http://www.adminschoice.com

Problem with my Bluetooth resulting in auto rebooting.

I am having a problem with my bluetooth ever since I bought XPERIA mini st15i. The first time it occured, I took it to the customer care, they solved the problem. The problem did occur again after 2 weeks. So, I again took it to Service. They resolved it again. This problem has occured about 8 times. Ever since I tranfer some files through bluetooth from gallery or file explorer, the phone restatrs again and again. It shows the Xperia logo and then agin, it auto reboots until the battery dies off. I updated the phone yesterday and the problem is occuring today again. My warranty period is over, so what can I do? In the warranty period, they changed my hardware but still the problem persists.
I think it's some kind of bluetooth bug. Can it be fixed?

download Sony Update Service and try this app http://www.sonymobile.com/ru/tools/update-service/ . Its helped me

IMac on Mavericks Auto-reboots randomly

I have a fresh install of Mavericks OS X. Sometimes I will literally have zero apps running, I'll come see the computer after it sat idle a couple hours and I'll have this message below after it auto-rebooted itself. I researched a trick to add the entire mac os hard drive to preferences > spotlight > privacy , then reboot, and then remove it, but that didn't work.
Anonymous UUID: 63ECFDB1-DC98-C66C-004B-D4CEB907B367
Thu Jul 24 13:28:23 2014
panic(cpu 7 caller 0xffffff80051640a5): "hfs_swap_HFSPlusBTInternalNode: catalog key #17 invalid length (2560)\n"@/SourceCache/xnu/xnu-2422.90.20/bsd/hfs/hfs_endian.c:526
Backtrace (CPU 7), Frame : Return Address
0xffffff81689d3d50 : 0xffffff8004e22fa9
0xffffff81689d3dd0 : 0xffffff80051640a5
0xffffff81689d3e10 : 0xffffff800516303f
0xffffff81689d3e60 : 0xffffff8005157a31
0xffffff81689d3ea0 : 0xffffff8005006e6e
0xffffff81689d3f90 : 0xffffff800500759b
0xffffff81689d3fb0 : 0xffffff8004ed6ff7
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide: 0x0000000004c00000
Kernel text base: 0xffffff8004e00000
System model name: iMac12,2 (Mac-942B59F58194171B)
System uptime in nanoseconds: 224255610034
last loaded kext at 148279250004: com.apple.filesystems.smbfs 2.0.1 (addr 0xffffff7f8755b000, size 335872)
last unloaded kext at 94500007929: com.apple.driver.AppleUSBUHCI 656.4.1 (addr 0xffffff7f85aa1000, size 65536)
loaded kexts:
com.apple.filesystems.smbfs 2.0.1
com.apple.filesystems.exfat 1.4
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleBluetoothMultitouch 80.14
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.3f10
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.14.15
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.6.0f1
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.kext.AMDFramebuffer 1.2.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleIntelHD3000Graphics 8.2.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.AMDRadeonX3000 1.2.0
com.apple.driver.AppleMikeyDriver 2.6.0f1
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleIntelSNBGraphicsFB 8.2.4
com.apple.kext.AMD6000Controller 1.2.0
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.5.1
com.apple.driver.AppleUSBHub 666.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AirPort.Atheros40 700.74.5
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleAHCIPort 3.0.0
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.kext.triggers 1.0
com.apple.driver.IOBluetoothHIDDriver 4.2.3f10
com.apple.driver.AppleMultitouchDriver 245.13
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.6.0f1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.5fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.3f10
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.iokit.IOAcceleratorFamily 98.14
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleHDAController 2.6.0f1
com.apple.iokit.IOHDAFamily 2.6.0f1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.0d10
com.apple.kext.AMDSupport 1.2.0
com.apple.AppleGraphicsDeviceControl 3.4.35
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleThunderboltEDMSink 2.1.3
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPOutAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.2.7
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IO80211Family 630.35
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 675.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0

Dominic De Lello wrote:
Loner T wrote:
OWC provides lifetime warranty, check out there web site. You may be able to find issues with memory using the Apple Hardware Test - Using Apple Hardware Test.
Thank you, I found my previous order. If the hardware tests come up inconclusive, should I still send the memory back for replacement? I'm not sure what the parameters of their warranty are.
Please see http://eshop.macsales.com/Service/warranty/owc-memory.cfm.
TechTool from MicroMat (http://www.micromat.com) is a good tool. Long time ago, it was included on Mac CDs.
The free version of Memtest86 (http://www.memtest86.com) can also be used.

No auto-reboot with WSUS

Hi all
We're currently trying to set up a WSUS in our firm, to make updating servers easier and less of a time-wasting work.
The goal would be, for the servers to automatically install the updates and then reboot, so a collegue or me only have to check in the WSUS to see wheter all updates were applied.
Now to the Problem:
Our WSUS is currently up and running and some (not all) servers in the network will, once approved, download and install the updates with the shedule. But they won't neither automatically reboot, nor directly ask me for a reboot after they're done. I either
can wait a long time or go to setting -> windows update and press on restart now.
The log is from the time it started the install, to the last entry it had when I opened it.
The last entry is also what i think is the problem, but I couldn't find a solutions with googling the error, so here I am.
The logs look like this:
2015-04-01 14:00:22:009
892 6d8
AU Request to perform an AU scheduled install
2015-04-01 14:00:22:009
892 6d8
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2015-04-01 14:00:22:009
892 6d8
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-04-01 14:00:22:009
892 6d8
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-04-01 14:00:22:009
892 6d8
AU Update {F8B1EBDF-8A40-4686-BEBA-094C5D8BF3B7}.200 was auto-approved for forced install
2015-04-01 14:00:22:009
892 6d8
AU #############
2015-04-01 14:00:22:009
892 6d8
AU ## START ## AU: Install updates
2015-04-01 14:00:22:009
892 6d8
AU #########
2015-04-01 14:00:22:009
892 6d8
AU # Initiating scheduled install
2015-04-01 14:00:22:009
892 6d8
AU # Approved machine updates for 3DA21691-E39D-4DA6-8A4B-B43877BCB1B7 = 1
2015-04-01 14:00:22:087
892 6d8
AU # Approved updates for 3DA21691-E39D-4DA6-8A4B-B43877BCB1B7 = 1
2015-04-01 14:00:22:087
892 6d8
IdleTmr WU operation (CInstallCall::Init ID 2) started; operation # 271; does not use network; is not at background priority
2015-04-01 14:00:22:087
892 6d8
IdleTmr Incremented idle timer priority operation counter to 2
2015-04-01 14:00:22:118
892 6d8
Agent Beginning install of conventional work item
2015-04-01 14:00:22:118
892 6d8
AU <<## SUBMITTED ## AU: Install updates / installing updates [CallId = {AA61D5E4-0965-4140-B4D0-13B4D219F94F}, ServerId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2015-04-01 14:00:22:118
892 6d8
WuTask WUTaskHandler successfully started the task.
2015-04-01 14:00:22:118
892 87c
Agent *************
2015-04-01 14:00:22:118
892 87c
Agent ** START ** Agent: Installing updates [CallerId = AutomaticUpdates]
2015-04-01 14:00:22:118
892 87c
Agent *********
2015-04-01 14:00:22:118
892 87c
Agent * Updates to install = 1
2015-04-01 14:00:22:118
892 87c
Agent * Title = Update for Windows Server 2012 R2 (KB3048778)
2015-04-01 14:00:22:118
892 87c
Agent * UpdateId = {F8B1EBDF-8A40-4686-BEBA-094C5D8BF3B7}.200
2015-04-01 14:00:22:118
892 87c
Agent * Bundles 1 updates:
2015-04-01 14:00:22:118
892 87c
Agent * {0739A81E-D61F-492B-9450-2AC1707FBCA1}.200
2015-04-01 14:00:22:134
892 87c
DnldMgr Preparing update for install, updateId = {0739A81E-D61F-492B-9450-2AC1707FBCA1}.200.
2015-04-01 14:00:22:134
4288 11c4
Misc =========== Logging initialized (build: 7.9.9600.17489, tz: +0200) ===========
2015-04-01 14:00:22:134
4288 11c4
Misc = Process: C:\Windows\system32\wuauclt.exe
2015-04-01 14:00:22:134
4288 11c4
Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
2015-04-01 14:00:22:134
4288 11c4
Handler :::::::::::::
2015-04-01 14:00:22:134
4288 11c4
Handler :: START :: Handler: CBS Install
2015-04-01 14:00:22:134
4288 11c4
Handler :::::::::
2015-04-01 14:00:22:134
4288 11c4
Handler Starting install of CBS update 0739A81E-D61F-492B-9450-2AC1707FBCA1
2015-04-01 14:00:22:149
4288 11c4
Handler CBS session identity: 30436467_1850714295
2015-04-01 14:00:22:149
4288 11c4
Handler CBS package identity: Package_for_KB3048778~31bf3856ad364e35~amd64~~6.3.2.0
2015-04-01 14:00:22:165
4288 11c4
Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\6809f963a34e237a312a57399ef56e0b\windows8.1-kb3048778-v2-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\6809f963a34e237a312a57399ef56e0b\inst
2015-04-01 14:00:27:134
892 868
Report REPORT EVENT: {B2E6BF0E-B92F-4F51-A7E3-16478F0B5274}
2015-04-01 14:00:22:118+0200 1
181 [AGENT_INSTALLING_STARTED] 101
{F8B1EBDF-8A40-4686-BEBA-094C5D8BF3B7}
200 0 AutomaticUpdates
Success Content Install
Installation Started: Windows has started installing the following update: Update for Windows Server 2012 R2 (KB3048778)
2015-04-01 14:00:27:134
892 868
Report WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
2015-04-01 14:00:27:134
892 868
Report WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
2015-04-01 14:00:27:134
892 868
Report CWERReporter finished handling 2 events. (00000000)
2015-04-01 14:00:33:399
4288 11c4
Handler Requesting post-reboot reporting for package Package_for_KB3048778~31bf3856ad364e35~amd64~~6.3.2.0.
2015-04-01 14:00:33:399
4288 11c4
Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
2015-04-01 14:00:33:415
4288 11c4
Handler :::::::::
2015-04-01 14:00:33:415
4288 11c4
Handler :: END :: Handler: CBS Install
2015-04-01 14:00:33:415
4288 11c4
Handler :::::::::::::
2015-04-01 14:00:33:415
892 87c
AU Preventing expiration of polled reporting events until next restart
2015-04-01 14:00:33:415
892 9ec
AU >>## RESUMED ## AU: Installing update [UpdateId = {F8B1EBDF-8A40-4686-BEBA-094C5D8BF3B7}, succeeded]
2015-04-01 14:00:33:430
892 87c
Agent *********
2015-04-01 14:00:33:430
892 87c
Agent ** END ** Agent: Installing updates [CallerId = AutomaticUpdates]
2015-04-01 14:00:33:430
892 9ec
AU Install call completed.
2015-04-01 14:00:33:430
892 87c
Agent *************
2015-04-01 14:00:33:430
892 9ec
AU # WARNING: Install call completed, reboot required = Yes, error = 0x00000000
2015-04-01 14:00:33:430
892 9ec
AU #########
2015-04-01 14:00:33:430
892 9ec
AU ## END ## AU: Installing updates [CallId = {AA61D5E4-0965-4140-B4D0-13B4D219F94F}]
2015-04-01 14:00:33:430
892 87c
IdleTmr WU operation (CInstallCall::Init ID 2, operation # 271) stopped; does not use network; is not at background priority
2015-04-01 14:00:33:430
892 9ec
AU #############
2015-04-01 14:00:33:430
892 87c
IdleTmr Decremented idle timer priority operation counter to 1
2015-04-01 14:00:33:430
892 474
AU Install complete for all calls, reboot needed
2015-04-01 14:00:33:430
892 474
AU CAUInstaller::OnAllCallsComplete | result of install HRESULT hr = 0x00000000
2015-04-01 14:00:33:430
892 474
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-04-01 14:00:33:430
892 474
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-04-01 14:00:34:040
892 474
AU Triggering Offline detection (non-interactive)
2015-04-01 14:00:34:040
892 474
AU Adding timer:
2015-04-01 14:00:34:040
892 474
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2015-04-01 12:00:34, not idle-only, not network-only
2015-04-01 14:00:34:040
892 474
WuTask ScheduledInstallTaskHandler received AU scheduled install complete event.
2015-04-01 14:00:34:040
892 474
WuTask ScheduledInstallTaskHandler completed with hr = 0x00000000
2015-04-01 14:00:34:040
3528 11ec
CltUI WARNING: GetAutoRebootInXDays: Auto-reboot time not found(hr = 80070002). Nothing to do here
2015-04-01 14:00:34:040
3528 11ec
CltUI WARNING: GetAutoRebootInXDays: Auto-reboot time not found(hr = 80070002). Nothing to do here
2015-04-01 14:00:34:040
892 474
AU Triggering Offline detection (non-interactive)
2015-04-01 14:00:34:040
892 474
WuTask WUTaskManager received event to unregister task.
2015-04-01 14:00:34:040
892 474
AU #############
2015-04-01 14:00:34:040
892 474
AU ## START ## AU: Search for updates
2015-04-01 14:00:34:040
892 474
AU #########
2015-04-01 14:00:34:040
892 474
IdleTmr WU operation (CSearchCall::Init ID 3) started; operation # 440; does not use network; is at background priority
2015-04-01 14:00:34:040
892 474
Agent *** START *** Queueing Finding updates [CallerId = AutomaticUpdates Id = 3]
2015-04-01 14:00:34:040
892 474
AU <<## SUBMITTED ## AU: Search for updates [CallId = {86DC1035-A187-4BAA-AE71-C7386D1ECA55} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2015-04-01 14:00:34:040
892 5f4
Agent *** END *** Queueing Finding updates [CallerId = AutomaticUpdates Id = 3]
2015-04-01 14:00:34:040
892 5f4
Agent *************
2015-04-01 14:00:34:040
892 5f4
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates Id = 3]
2015-04-01 14:00:34:040
892 5f4
Agent *********
2015-04-01 14:00:34:040
892 5f4
Agent * Online = No; Ignore download priority = No
2015-04-01 14:00:34:040
892 5f4
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2015-04-01 14:00:34:040
892 5f4
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2015-04-01 14:00:34:040
892 5f4
Agent * Search Scope = {Machine & All Users}
2015-04-01 14:00:34:040
892 5f4
Agent * Caller SID for Applicability: S-1-5-18
2015-04-01 14:00:38:415
892 868
Report REPORT EVENT: {7E1602B6-2A94-4769-A590-E3DF79B71208}
2015-04-01 14:00:33:415+0200 1
201 [AGENT_INSTALLING_PENDING] 101
{F8B1EBDF-8A40-4686-BEBA-094C5D8BF3B7}
200 240005
AutomaticUpdates Success
Content Install Installation pending.
2015-04-01 14:00:38:415
892 868
Report REPORT EVENT: {D637482E-0808-42A6-A4E7-797D135E4A40}
2015-04-01 14:00:33:430+0200 1
194 [AU_SCHEDULED_REBOOT_REQUIRED] 102
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Content Install
Restart Required: To complete the installation of the following updates, the computer will be restarted within 15 minutes: - Update for Windows Server 2012 R2 (KB3048778)
2015-04-01 14:00:38:415
892 868
Report CWERReporter finished handling 3 events. (00000000)
2015-04-01 14:00:51:977
892 5f4
Agent WARNING: Failed to evaluate Installed rule, updateId = {{A4ECF96E-FE76-4933-B1A9-FAA712DC2A3B}.200}, hr = 80070057
2015-04-01 14:00:51:977
892 5f4
Agent WARNING: Failed to evaluate Installable rule, updateId = {{A4ECF96E-FE76-4933-B1A9-FAA712DC2A3B}.200}, hr = 80070057
2015-04-01 14:00:51:977
892 5f4
Agent WARNING: Failed to evaluate Installed rule, updateId = {{9941EB5F-4953-446D-99A2-C5989C596283}.200}, hr = 80070057
2015-04-01 14:00:51:977
892 5f4
Agent WARNING: Failed to evaluate Installable rule, updateId = {{9941EB5F-4953-446D-99A2-C5989C596283}.200}, hr = 80070057
2015-04-01 14:01:34:179
892 5f4
Agent * Added update {F8B1EBDF-8A40-4686-BEBA-094C5D8BF3B7}.200 to search result
2015-04-01 14:01:34:179
892 5f4
Agent * Found 1 updates and 68 categories in search; evaluated appl. rules of 380 out of 945 deployed entities
2015-04-01 14:01:34:179
892 5f4
Agent *********
2015-04-01 14:01:34:179
892 5f4
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates Id = 3]
2015-04-01 14:01:34:179
892 5f4
Agent *************
2015-04-01 14:01:34:179
892 5f4
IdleTmr WU operation (CSearchCall::Init ID 3, operation # 440) stopped; does not use network; is at background priority
2015-04-01 14:01:34:179
892 9ec
AU >>## RESUMED ## AU: Search for updates [CallId = {86DC1035-A187-4BAA-AE71-C7386D1ECA55} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2015-04-01 14:01:34:179
892 9ec
AU # 1 updates detected
2015-04-01 14:01:34:179
892 9ec
AU #########
2015-04-01 14:01:34:179
892 9ec
AU ## END ## AU: Search for updates [CallId = {86DC1035-A187-4BAA-AE71-C7386D1ECA55} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2015-04-01 14:01:34:179
892 9ec
AU #############
2015-04-01 14:01:34:179
892 9ec
AU All AU searches complete.
2015-04-01 14:01:34:179
892 9ec
AU Adding timer:
2015-04-01 14:01:34:179
892 9ec
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2015-04-01 12:26:32, not idle-only, not network-only
2015-04-01 14:01:34:194
892 9ec
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-04-01 14:01:34:194
892 9ec
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-04-01 14:01:34:194
3528 11ec
CltUI WARNING: GetAutoRebootInXDays: Auto-reboot time not found(hr = 80070002). Nothing to do here
2015-04-01 14:01:34:194
3528 11ec
CltUI WARNING: GetAutoRebootInXDays: Auto-reboot time not found(hr = 80070002). Nothing to do here
I hope someone can help me with this issue.
Kind Regard dumdidu

Thanks for the reply, but I already proposed this and it isn't really an option. The goal is to get a comlete oversight with WSUS with as less inputs as possible.
But maybe you can riddle me this column from the log:
2015-04-01 17:57:45:862
828 1090
RebootNotify UpdateRebootRequiredNotification, set reboot grace timeout reg value SecurityUpdatesRebootRequiredNotificationTime to 2015-04-03 15:57:45
2015-04-01 17:57:45:862
828 1090
AU Adding timer:
2015-04-01 17:57:45:862
828 1090
AU Timer: 13EB7139-5C9B-4817-98B7-A22174B1AA43, Expires 2015-04-03 15:57:45, not idle-only, not network-only
2015-04-01 17:57:45:877
828 1090
AU AU setting reboot grace timeout to 2015-04-03 15:57:45
Those timers are in the past. How is this even possible?
From what I know they're two hours behind, as you can see in this log:
2015-04-02 10:23:06:960
916 15f4
AU ########### AU: Policy change processed ###########
2015-04-02 10:23:06:960
916 15f4
AU # Policy changed, AU refresh required = No
2015-04-02 10:23:06:960
916 15f4
AU # WSUS server: http://192.168.50.160:80
2015-04-02 10:23:06:960
916 15f4
AU # Detection frequency: 1
2015-04-02 10:23:06:960
916 15f4
AU # Target group: MDU
2015-04-02 10:23:06:960
916 15f4
AU # Approval type: Scheduled (Policy)
2015-04-02 10:23:06:960
916 15f4
AU # Scheduled install day/time: Every day at 13:00
2015-04-02 10:23:06:960
916 15f4
AU # Auto-install minor updates: Yes (User preference)
2015-04-02 10:23:06:960
916 15f4
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2015-04-02 10:23:06:960
916 15f4
AU AU settings changed through Policy.
2015-04-02 10:23:06:960
916 15f4
AU Setting AU scheduled install time to 2015-04-02 11:00:00

Oracle VM 3.1 Server automatically reboots after - stopping it

When I try to stop my OVM 3.1 server, using shutdown, or init 0 the server stops, but automatically boots again....
Anyone run into the same problem?
Thanks for all your suggestions
Rob

dave wrote:
The OVM server? Yes OVM Server :)
I've not seen this before. It could be that the hardware doesn't support the poweroff signal from the OS. Although I'm not sure if it is that much of an issue, as you rarely turn off / on the OVM servers themselves. You can easily power it off if it does a reset not a poweroff.The reboots after "init 0" disappeared once after I added a third NIC to my box, and dedicated it for virtual machines
ie, my Windows 7 box, on which I setup the entire VM infrastructure using VirtualBox has 3 NICs. Two for the VM Server, and the third one for the VM Manager.
The second NIC with VM Server configured to handle the traffic from Virtual Machines, isolating the 1st NIC for all other VM Server traffic. No more rebooting with VM Server and always shuts down with a "init 0"
Hope this info is useful for few others out there
regards,
raj
Adding something I missed with last post
Following sequence is always used to shutdown the VM Server as my setup has NFS shares setup from VM Manager server itself
1. Shutdown VM Server first (Stops all heartbeats etc gracefully)
2. Stop OVMM service on VM Manager server
3. Shutdown VM Manager Server
Edited by: Raj Thampi on Aug 18, 2012 11:45 AM

T400: auto reboot after poweroff

Similar Messages

Maybe you are looking for