T400 bluetooth doesn't turn on after wake-up from standby mode

Hello
Please help
My T400 doesn't turn on bluetooth after wake-up from standby mode
i need to enable it every time by hand.
Thing thing appeared after migration to Windows 7. Before, i used WinXp and that worked fine.
I setup all recommended software via SystemUpdate

On T400s this happend, if you try Linux to install and after that you install Windows 7. I have test Ubuntu (boot from LiveCD) and after that i had exactly sam eproblem. Solution was to reset BIOS to default values.
Lenovo T440s, 20AQ0067MC, Windows 8.1 Pro x64 UEFI, Samsung 840 EVO SSD 250 GB, 8 GB RAM
Lenovo T430s, 2356LQG, Windows 8.1 Pro x64 UEFI, Intel 520 SSD 180 GB, 8 GB RAM
Lenovo T420s, 4171-6SG, Windows 8 Pro x64 UEFI, Intel 320 SSD 120 GB, 8 GB RAM
Lenovo T400s, 2808-CYG, Windows 7 Ultimate x64

Similar Messages

After update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.

hello,
after update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.
the used ports appear to be "killed"; the unused USB ports seem to work, but the Mac works in slow-motion.
The only "solution" is to restart my Mac.
- SMC-reset, PRAM-reset or repairing user rights had no positive effect; what is the solution - a bug-fix-update???

I have a mac mini (A1283) with OS 10.7.4. Upon upgrading to 10.7.5 it did not start up again. Instead, the light was on and the hard drive did not start up. The light on the connected USB mouse was not lit.
My solution:
Cold start with Command-v pressed.
This should start Verbose mode (see http://support.apple.com/kb/HT1492 ).
What happened on my mac mini was that the grey startup screen with the Apple logo appeared for a long while before the login screen came.
Maybe Cmd-v set open firmware params and fixed some corruption.
Anyway: my mac mini works again.

Satellite A300-1NO - Wakes up from standby mode

Hi all!
I have got a Satellite A300-1NO with Win XP pro.
The problem is, that the laptop wakes up from standby mode automatically after about 5 minutes.
I tried to unplug all cables (LAN, usb, etc) but the power plug, but it's the same result.
So what can cause this? What should I try?
thanks.

You should disable the Wake up on LAN function in BIOS and Windows.
Check the BIOS for this option!
You can disable this feature in Windows if you right click on the network card > properties > advanced > wake on LAN
I hope it works for you.

Mac Mini late 2012 with Mavericks don't wake up from standby mode

My Mac minin used to run with OS X ML 24/7 without any problem. After Update to Mavericks the Mac won't recover from standby mode. I have to power off the mac.
I cleared nvram, pram, installed Mavericks second time.
What can I do? Return to Mountain Lion?

I gave Mavericks a second try. It failed. Made clean install ofe mavericks, setup user manually, reinstalled my most needed applications. The mac mini will not wake up from standby mode (blanc screen -> must reboot/hard reset; spinning beachball -> hard reset)
I reset nvram and pram.
Any advice? any chance to get informations by apple?
rgds

IMac Mid 2010 kernel panic after wake up from sleep mode

Hello.
One month ago starting my iMac Mid 2010 occasionally goes to kernel panic. When I click on mouse or press any key, system starting up, but very very slowly, (time on logon screen stay same without refresh) and after few minutes (from 1 - 10 minutes) kernel panic message is appear on screen. I have Mac OS 10.7.5 version installed.
Is there any tool to debug what is wrong. Windows OS has WinDebuger to detaily look inside to core dump and analyze it and in my experience almost allways is possible to detect root of problem.
First of all i was try HW diagnostic from DVD, succesfully passed. Then I run Permission Repair procedure, there were many folders and files with different ACL as system expected.
It is possible that graphic card driver is wrong or has bug from my point of laic view.
I have minimum application with kext installed into system:
VMware fusion
NTFS-3g ( long time same version )
There is part of long kernel panic message:
Interval Since Last Panic Report: 12304 sec
Panics Since Last Report:          2
Anonymous UUID:                    5D8F11DC-6A58-44A2-9C21-E43CFB9935BC
Tue Dec 4 22:05:16 2012
panic(cpu 2 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f8161786d, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x00007fff90fdb488, CR3: 0x000000007bb6201a, CR4: 0x00000000000206e0
RAX: 0xffffff801915a8c8, RBX: 0xffffff800c938300, RCX: 0xffffff801915a8a8, RDX: 0x0000000090fdb000
RSP: 0xffffff807ea237f0, RBP: 0xffffff807ea23810, RSI: 0x000000008e2cf520, RDI: 0xffffff800bac80c0
R8: 0x0000000000994000, R9: 0x000000000fff0000, R10: 0x0000000000000002, R11: 0x0000000000000001
R12: 0x00000000000000b6, R13: 0xffffff800c938300, R14: 0x00007fff90fdb480, R15: 0xffffff800bac80c0
RFL: 0x0000000000010286, RIP: 0xffffff7f8161786d, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x00007fff90fdb488, Error code: 0x0000000000000003, Faulting CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff807ea234a0 : 0xffffff8000220792
0xffffff807ea23520 : 0xffffff80002c4794
0xffffff807ea236d0 : 0xffffff80002da55d
0xffffff807ea236f0 : 0xffffff7f8161786d
0xffffff807ea23810 : 0xffffff7f81664262
0xffffff807ea23830 : 0xffffff7f81664984
0xffffff807ea23870 : 0xffffff7f81621b7d
0xffffff807ea23890 : 0xffffff7f815f93bb
0xffffff807ea238c0 : 0xffffff7f815fcf47
0xffffff807ea23910 : 0xffffff7f81630096
0xffffff807ea23960 : 0xffffff7f81647786
0xffffff807ea239b0 : 0xffffff7f816414bc
0xffffff807ea23a00 : 0xffffff7f81601477
0xffffff807ea23a40 : 0xffffff7f8163efdd
0xffffff807ea23a90 : 0xffffff7f81604a46
0xffffff807ea23b60 : 0xffffff7f81601afc
0xffffff807ea23bc0 : 0xffffff8000655f3e
0xffffff807ea23be0 : 0xffffff800065681a
0xffffff807ea23c40 : 0xffffff8000656fbb
0xffffff807ea23d80 : 0xffffff80002a3f08
0xffffff807ea23e80 : 0xffffff8000223096
0xffffff807ea23eb0 : 0xffffff80002148a9
0xffffff807ea23f10 : 0xffffff800021bbd8
0xffffff807ea23f70 : 0xffffff80002aef10
0xffffff807ea23fb0 : 0xffffff80002daec3
      Kernel Extensions in backtrace:
         com.apple.ATIRadeonX2000(7.3.2)[9B704AFE-AF23-381E-A057-5982532504F5]@0xffffff7 f815f8000->0xffffff7f818cafff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8082b000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80cb3000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c7a000
BSD process name corresponding to current thread: loginwindow
Mac OS version:
11G63b
Many thanks for any helping suggestion.
Mano

Here you are rest of KP message:
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 40019343425940
last loaded kext at 37729361423656: com.apple.filesystems.msdosfs    1.7.1 (addr 0xffffff7f80798000, size 57344)
last unloaded kext at 37908230931100: com.apple.driver.AppleUSBCDC    4.1.22 (addr 0xffffff7f80795000, size 12288)
loaded kexts:
com.github.osxfuse.filesystems.osxfusefs    2.5.2
com.vmware.kext.vmnet    3.1.4
com.vmware.kext.vmioplug    3.1.4
com.vmware.kext.vmci    3.1.4
com.vmware.kext.vmx86    3.1.4
com.apple.driver.AppleBluetoothMultitouch    70.12
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AudioAUUC    1.59
com.apple.driver.AGPM    100.12.75
com.apple.filesystems.autofs    3.0
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.driver.AppleUpstreamUserClient    3.5.9
com.apple.driver.AppleHDA    2.2.5a5
com.apple.driver.AppleMikeyDriver    2.2.5a5
com.apple.kext.ATIFramebuffer    7.3.2
com.apple.ATIRadeonX2000    7.3.2
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.iokit.IOBluetoothSerialManager    4.0.8f17
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AudioIPCDriver    1.2.3
com.apple.driver.ApplePolicyControl    3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin    5.0.0d8
com.apple.driver.AppleLPC    1.6.0
com.apple.driver.AppleBacklight    170.2.2
com.apple.driver.AppleMCCSControl    1.0.33
com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.8f17
com.apple.driver.AppleUSBCardReader    3.0.6
com.apple.driver.AppleIRController    312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    33
com.apple.iokit.SCSITaskUserClient    3.2.1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCISerialATAPI    2.0.3
com.apple.iokit.IOAHCIBlockStorage    2.1.0
com.apple.driver.AppleUSBHub    5.1.0
com.apple.driver.AppleFWOHCI    4.9.0
com.apple.iokit.AppleBCM5701Ethernet    3.2.4b8
com.apple.driver.AirPort.Atheros40    505.67.1
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleUSBEHCI    5.1.0
com.apple.driver.AppleACPIButtons    1.5
com.apple.driver.AppleAHCIPort    2.3.1
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.5
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
com.apple.nke.applicationfirewall    3.2.30
com.apple.security.quarantine    1.4
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
com.apple.driver.AppleMultitouchDriver    231.4
com.apple.driver.IOBluetoothHIDDriver    4.0.8f17
com.apple.kext.triggers    1.0
com.apple.driver.DspFuncLib    2.2.5a5
com.apple.kext.ATI4600Controller    7.3.2
com.apple.kext.ATISupport    7.3.2
com.apple.iokit.IOFireWireIP    2.2.5
com.apple.iokit.IOSurface    80.0.2
com.apple.iokit.IOSerialFamily    10.0.5
com.apple.driver.AppleHDAController    2.2.5a5
com.apple.iokit.IOHDAFamily    2.2.5a5
com.apple.iokit.IOAudioFamily    1.8.6fc18
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.AppleSMC    3.1.3d10
com.apple.driver.IOPlatformPluginLegacy    5.0.0d8
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.driver.AppleGraphicsControl    3.1.33
com.apple.driver.IOPlatformPluginFamily    5.1.1d6
com.apple.driver.AppleBacklightExpert    1.0.4
com.apple.iokit.IONDRVSupport    2.3.4
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.iokit.IOGraphicsFamily    2.3.4
com.apple.driver.AppleUSBHIDKeyboard    160.7
com.apple.driver.AppleHIDKeyboard    160.7
com.apple.driver.AppleUSBBluetoothHCIController    4.0.8f17
com.apple.iokit.IOBluetoothFamily    4.0.8f17
com.apple.iokit.IOSCSIBlockCommandsDevice    3.2.1
com.apple.iokit.IOUSBMassStorageClass    3.0.3
com.apple.iokit.IOUSBHIDDriver    5.0.0
com.apple.driver.AppleUSBMergeNub    5.1.0
com.apple.driver.AppleUSBComposite    5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
com.apple.iokit.IOFireWireFamily    4.4.8
com.apple.iokit.IOUSBUserClient    5.0.0
com.apple.iokit.IOEthernetAVBController    1.0.1b1
com.apple.iokit.IO80211Family    420.3
com.apple.iokit.IONetworkingFamily    2.1
com.apple.iokit.IOUSBFamily    5.1.0
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.7.1
com.apple.iokit.IOAHCIFamily    2.0.8
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    177.8
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.DiskImages    331.7
com.apple.iokit.IOStorageFamily    1.7.2
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.5
com.apple.iokit.IOPCIFamily    2.7
com.apple.iokit.IOACPIFamily    1.4
Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.06 GHz, 4 GB, SMC 1.64f5
Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: WDC WD5000AAKS-40V6A0, 500.11 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfa140000 / 5
USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfa142000 / 7
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
Mano

Satellite P200-144 shuts down after wake up from hibernation mode

Sometimes when I resume my computer from hibernation, I come back to it (after going to make a cup of tea whilst it boots up, for instance) to find it off again.
I have since observed it more closely and discovered the following: if I resume from hibernation and do not touch the mouse or keyboard, the computer will load up Windows but then hibernate itself again immediately.
If I move the mouse pointer at some point whilst Windows is finishing loading the desktop, etc., then the computer doesn't automatically hibernate.
Has anyone else had this problem and is there a solution?

Thanks for your reply. I am, and always have been, running the latest BIOS. I have never experienced the issue with standby, but that is probably because of the way I use my computer -- with standby, I start using it immediately. I have not tested resuming from standby and not pressing any buttons or moving the mouse.
Have you tested it as I described, by not moving the mouse or pressing any keys when resuming from hibernation, or are you just recalling from memory that you have not experienced it?

Firefox 14 in Win 7 slow after wake-up from sleep mode.

Firefox 14 is slow after waking up from sleeping. Symptoms: responses to scrolling, pointing & clicking (including close 'X') and tab switching delayed. scrolling not responsive, instead 'jumps' in large chunks. Resolution: close and re-launch Firefox.

Thanks for this problem. I need more info.

DHCP loses ip address after wake up from sleep mode.

My wife and I got a WRT54G router to replace the ethernet hub we had been using in order to get better reception for our voip phone system. We connect to the web using a 2-Wire DSL modem which connects to the router. From there we use ethernet to connect our computers to the router. I am running a G4 iMac flatscreen and she just got a new Macbook Pro. I had a very difficult time configuring my computer for the router, calling Kalcutta numerous times, but finally got on the web. However, after I or my wife wake up our computers from the sleep mode, we find the infamous 169 xxx xxx xx ip address indicating that we cannot connect to the web unless we shut down the modem and the router and then restart them. This is getting to be a pain. Anyone out there got a clue?

rob4250 wrote:
after I or my wife wake up our computers from the sleep mode, we find the infamous 169 xxx xxx xx ip address indicating that we cannot connect to the web unless we shut down the modem and the router and then restart them.
Although, you do not state specifically, when shutting down the modem and the router, are you also unplugging them from the AC power, shutting down the computers and waiting at least 60 seconds? Then you restart in the order of modem, router and then computer waiting for each to fully sync up before turning on the next device, yes?
I had the 169 problem with another brand router and solved it by resetting the router to factory defaults, then re-setup for my use. See the Linksys DSL Setup for Mac and specifically the Note in Step 6.
HTH

Screen stays off after wake up from standby

So this happens most often when I have an external display connected, but has happened otherwise to me and my friend who has identical macbook.
usually, I'll connect the external display, then shut the screen on the macbook, then wake the macbook with an external mouse or keyboard, and use the macbook with the external display. When I'm done and want to disconnect the external display, i'll unhook it, and then open the screen on the macbook. when I open the screen, the standby light (the one that pulsates when in standby, and stays bright when screen is off and computer is not in standby) turns off, signifying that the computer has woken and the screen is running, but the screen remains off. the function keys for volume or contrast make nothing appear on the screen, and it is completely off, rather than just showing a black screen. if I shut the screen when this is happening, the standby light turns back on, and upon opening screen again, the standby light turns off again, but still, no display. it seems the only way to alleviate the problem is to hold the power button for 5 seconds. I've tried resetting the pram, and everything else you can reset upon booting, as well as doing the thing where you take the battery out, disconnect power, and hold power button for 7 seconds. nothing stops it from happening.
If i open the screen before disconnecting the external display, it usually works fine, but sometimes it happens without an external display ever being present.
any ideas?
-Tim

I use a dual monitor system at work all the time. The best thing to do is to disconnect the second monitor while your computer is still awake and open. It doesn't like it when you put it to sleep and then disconnect. It's probably like putting toothpaste in the ear of your best friend when he's drunk and passed out. Then when he wakes up he wonders why he can't hear out of one ear.

Satellite M70-394: WLan does not work after wake up from standby

Hi all....
I have a problem with my WLan connection and hope one of you may be able to help. Starting my computer from off there isn't a problem with the WIFI connection but if I put the computer into standby by closing the lid and then restarting it from there the light comes on briefly for wi fi but then goes off and the only way I can connect is through a cable.
Any suggestions would be gratefully appreciated.

Hi
I have read in the forum that some similar "Wlan standby" issues were fixed by BIOS update.
I think you should compare the BIOS version on the notebook with the BIOS which is available on the website. If there is a new update try to upgrade it
Be sure that you have chosen the right BIOS.

My password works fine when I turn the computer on, but when I try to wake it from sleep mode the computer doesn't recognize my password -- the same one I used successfully when I turned the computer on.

My password works fine when I turn the computer on, but when I try to wake it from sleep mode the computer doesn't recognize my password -- the same one I used successfully when I turned the computer on.

Okay, I seem to have solved the problem I posted about earlier. I noticed that the language preference in the upper right hand corner of the screen (between the date and time and the Spotlight icon) had somehow gotten switched from American English to French. When I switched it back to American English, my password worked when waking the computer from sleep mode. I have no idea why changing the language preference would affect the way the password works but that seems to have been the case. I'll post again if I experience more problems.

Xperia doesn't turn on after falling out of my pocket

My Xperia doesn't turn on after falling out of my pocket (2' off the floor), the only thing that's on is the flash led. Is there a solution or should I just replace the phone?
I tried to use PC Companion after charging the phone over night and still the same problem; the flash led is the only thing that's on and PC Companion doesn't detect the phone at all, so I guess I have to replace my phone.

You have to perform a software repair using PC companion.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

K8N Neo-FSR CPU fan at full throttle after wake up from S3 (Suspend to RAM)

Hi,
using either Core Center or BIOS' smart cpu fan control my cpu fan throttles down to less than 2000 RPM without system load. Fine! But after wake up from S3 (Suspend to RAM) power down the cpu fan runs forever at full throttle with about >5000 RPM, making lots of noise. So far I didn't succeed neither with BIOS settings nor using Core Center to gain fan control after S3 wake up. Since Core Center apparently shows up the cpu temperature correctly with less than 40 degrees Celsius this may be a BIOS 1.4 bug.
Can someone please point me into the right direction? Yep, I did read the FAQ and already use board's search function :-)
Falo

addendum
did some further testing. Apparently this doesn't happen if I wait at least a couple of minutes between shutdown to S3 and wake up. In this case fan control works as expected afterwards.
Falo

MacBook Pro doesn't wake up from sleep mode

My MacBook Pro (late 2011) with OS Mavericks doesn't wake up from sleep mode anymore. Battery is fully charged and the cable is plugged in. I can still hear the ventilator running, but that's all. I never had any problems, but since about 2 weeks this problem occurs. It usually then woke up after 10-15min, but now nothing happened since 4 hours.
Is there anyone who could possible help me? Unfortunately there is no Apple Store in my area where I could go to.

Step 1
Take all the applicable steps in this support article. That's the starting point for any further efforts to solve the problem. Please read the whole article carefully (some of it is hidden by disclosure triangles) and don't skip any of the steps, including the ones under the heading "Additional troubleshooting." If you don't understand any of the steps, ask for guidance.
Step 2
If you're running OS X 10.8.5 or earlier, from the menu bar select
           ▹ System Preferences... ▹ Accessibility
If the checkbox at the bottom marked
          Enable access for assistive devices
is checked, uncheck it and test.
If you're running OS X 10.9 or later, select
           ▹ System Preferences... ▹ Security & Privacy ▹ Privacy ▹ Accessibility
If any applications are listed on the right and have a checked box next to them, uncheck all the boxes and test. You may first have to click the padlock icon in the lower left corner of the window and authenticate as an administrator to unlock the settings.
Step 3
In the Energy Saver pane of System Preferences, uncheck the box marked
          Put hard disks to sleep when possible
Step 4
This and the next step must be taken as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that heading, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You may see one or more reports with a name that begins with "Sleep Wake Failure" followed by a date. Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
Step 5
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ Diagnostic and Usage Messages
In the search box in the window's toolbar, enter "powerd" (without the quotes.)
You may see one or more lines like this:
com.apple.message.signature: Platform Failure
If you do see that, and you did everything in the preceeding steps, then you're dealing with an internal hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Doesn´t wake up from sleep mode

Hi mac users,
my MacPro doesn´t wake up from sleep mode with a key press after new installation of OS 10.8.1.
Can anyone help me?
Thanks

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

T400 bluetooth doesn't turn on after wake-up from standby mode

Similar Messages

Maybe you are looking for