T400 Dead After Installing 7,200 RPM Hard Drive - Twice! (2764-CTO)

Does T400 have issues/restrictions with non-oem hard drives? My T400 came with a Seagate 5,400 RPM 160GB, after I swapped it with a Hitachi 7,200 RPM 100GB drive, it doesn't boot any more -- only the power indicator is on, and the hard dirve spins, and that's it, no display, no POST, no error beeps, no nothing. I called the service and had my motherboard replaced; at first I used the 5,400 RPM 160GB drive, everything's fine; until I put the 7,200 RPM 100GB drive in -- it died again! The 7,200 RPM drive is totally working as an external hard drive, and also working fine as a system drive in T60p. I called the tech support and they suggested me to send the unit in so they can really figure out the problems, I declined because I have had bad experiences sending my machines out to service facility. At this point I'm seriously thinking to get my T400 replaced; but if this is a common issue that I wouldn't be able to use any 7,200 RPM hard drives other than the ones from Lenovo, then there's no point getting this one at all. Anyway, anyone got any ideas would be much appreciated.
Thanks!

You're having a different issue - your T400 boots as long as you swap the original HD back. In my case my T400 doesn't even POST after I put the original HD back in. I got the technician replaced the motherboard twice, and it finally worked out the second time. However we found another problem: surprisingly, my T400 was actually shipped without the BIOS backup battery (THANKS LENOVO), I had to call the service center again to request it; I got it the 2nd day, and my T400 is working so far so good, with the 100GB 7,200 rpm HD.
So far I haven't heard the non-oem HD compatibility issue on T400. In your case, it looks like your Seagate HD was just not recognized. Try changing the SATA AHCI setting in BIOS to compatible and see if it works that way.
Message Edited by rayray on 10-21-2008 04:16 PM

Similar Messages

Lousy 'fan' noise after installing a new internal hard drive

Hi,
I installed a new internet hard drive to replace my corrupted hard drive. The new hard drive is WD 320GB. Somehow, i got it installed and work. I install leopard on it and it works well as far as this point. Now, I have a new problem. Before installing the hard drive, my iMac run very quiet. Now, as soon as I turn on my iMac, i can hear a very noisy and loud 'fan' sound. I do not know if it is hard drive spinning or one of the fan. I do not notice any weird sound except it definitely a very loud spinning fan sound. I do not have Apple Care or warranty with Apple. Any suggestion to isolate the problem pls ?
I use iStat Pro and have the following info:
- CPU fan : 800-900 rpm
- CPU and GPU temp : 40 - 60 C degree
- Hard drive fan : 5000 rpm
Another question is : when i take my old hard drive, i noticed it has 1 power cable, 1 SATA cable and 1 small cable with connect some kind of chip on my motherboard to a small chip on the right hand side of hard drive. It appears to me that Apple attached a small chip on the side of hard drive. And i do not know where to connect that wire to my new hard drive. So i just left it un-connected. Thought, i connect power cable and the SATA cable. Any idea what that wire used for ?
Thanks
Message was edited by: DeathNote

Hi Dennis,
Thank for informing me the heat sensor. Basically, i can take the heat sensor out from my old internal hard drive and stick it on the new drive ? If so, how do i do it ? can i use any glue to stick heat sensor on new drive ?
Also, I just figure something. I opened the front cover, then run iMac. I noticed the noisy sound, i thought it might be the fan or the hard drive. So , i disconnect the fan power cable and restart the computer. Now, it runs very quitely. I can not hear anything noise as all. No thing. So i assume that the hard drive is not the problem. As soon as i plug back the power cable for the fan. The noise come back.
Is there a software to control the speed of the fan ? Using Istat, i have the following info :
- CPU : 42 C degree
- HD : 29 C degree
- GPU : 43 C degree
- Ambient : 22 C degree
- mem controller : 37 C degree
- CPU fan : 860 rpm
- HD fan : 5000 rpm
- Optical fan : 800 rpm
Thank you .
p/s: inside my iMac is different than in the picture.

After installing brand new Macbook hard drive, boot to disk shows a flashing folder with a question mark

I had to install a new hard drive for my macbook after my last one had obviously crashed and was making clicking noises. The problem is I can't install OSX on my new one and I'm getting extremely frustrated. What could be going wrong? I've reset PRAM and done everything I could find suggested online.

Have you tried inserting the Snow Leopard Install disc and using Startup Manager to select the Snow Leopard disc as the startup disk? Once you get started up from the Snow Leopard Install disc, the rest of the instructions can be found in the manual for your MacBook Pro. Here are the ones for mine:
Installing Mac OS X and Applications — New Hard Drive
from http://manuals.info.apple.com/en_US/MacBook_13inch_HardDrive_DIY.pdf
To install Mac OS X and the applications that came with your computer, follow these steps:
1.          Start up from the Mac OS X Install Disc 1 that came with your computer, and choose your language.
2.          From the menu bar, choose Utilities > Disk Utility.
3.          Open Disk Utility and select the new drive in the list to the left. Note: If you are formatting the primary drive, use the Disk Utility program on the Install disc.
4.          Click the Partition tab.
5.          Click on Options, and verify GUID is selected if this is the startup drive.
6.          Name the volume “Macintosh HD.”
7.          Apply the change by clicking the Partition button.
8.          At this point, either
•          Quit the Disk Utility application, and proceed with the Mac OS X installation. Follow the
onscreen instructions. After selecting the destination disk for installation, continue following the onscreen instructions. Your computer may restart and ask you to insert the next Mac OS X Install Disc 2.
or
•          Leave the Disk Utility application open, and restore the backed up files from the image
you created before removing the hard drive.
Installing Applications
To install just the applications that came with your computer, follow the steps below. Your computer must have Mac OS X already installed.
1.          Back up your essential files, if possible.
2.          Insert the Mac OS X Install Disc 1 that came with your computer.
3.          Double-click “Install Bundled Software Only.”
4.          Follow the onscreen instructions.
5.          After selecting the destination disk for installation, continue following the onscreen instructions. Your computer may restart and ask you to insert the next Mac OS X Install Disc 2
6.          Restore the data by reinstalling the backed up files from your backup to the new drive.

IMac 17" Hard Drive and DVD dead after install.

I am attempting to install a WD 250gig hard drive into a 17” flat panel 800mhz imac. I followed the directions of taking the base apart and installing the new drive with great care. The Original 80 gig drive was set to master and the DVD drive was set to slave. I set the new WD drive to master and put the base back together. All I got was a flashing question mark. That was not unexpected, but I have been unable to get the iMac to recognize the existence of a hard drive or the DVD superdrive. I started the iMac from my Powerbook in firewire target mode. And verified that the iMac does not see the drives within the system information or the Disk Utility.
I have tried resetting PRAM, changing the jumpers on both drives, making the DVD master and the HD slave, setting the HD on cable select. Formatting the HD in my Powermac and cloning the original HD to it with CCC and replaced the ribbon cable. I now can take this iMac apart and put it back together faster then a Chinese factory worker.
I have abandon hopes of a new hard drive and put the 80 gig back in exactly as I found it. The iMac will not recognize the original configuration either. I started this project as favor for my sister who owns the iMac. There is not a lot of money here to send the whole works into service.
Does anyone have any ideas on what went wrong?
Is there a way I can test the power supply to the drives?
imac 17" FP 800 mhz Mac OS X (10.4.7)

Well we figured it out. DO NOT TRY THIS AT HOME. Since nothing we did worked, I figured we had nothing to lose. With the assistance of my electronics wiz brother, we powered up the iMac while having the base opened and the components spread out on a table. Using a voltmeter, we determined we were only getting 3.6 volts to the drives. It should have been 12 volts. Somehow, something went wrong with the system board. After careful examination under a magnifying glass and some prodding with a voltmeter, we discovered that a tiny component next to the power connector on the system board fell off. It was no more than 2mm across and was marked (L13). We figured this was an inductance component and probably a filtering device for the power to the drives. We powered up the board and jumped the leads with a screwdriver. The HD and DVD fired right up. A careful soldering across L13 made the fix permanent. I got it all put back together and everything is running great.
The moral of the story; be extremely careful when pulling connectors off the system board. I must have knocked the component off when I first took the iMac apart. I just got lucky we found out what it was and were able to find a quick fix.
This a nice little iMac, but i never want to work on one again.

My external drive went dead after installing Leopard

Hey guys
I'm very bummed out, my external HD went dead after installing Leopard on my Dual 2.3 GHz PowerPC G5. It was working perfectly fine before, had not a single problem with it but now, I've just lost all my work. I tried Disk Utility from the disc with no luck, it gave tons of errors and it say it couldn't be repaired. Now, it doesn't show up at all. Every single time I connect it I get a message saying the disk I inserted is not readable by the computer. This is a 200GB Maxtor external drive. Is there anything I can do to fix it? Any hardcore Software to retrieve my files? I'd appreciate if anyone can help me with this.
Thank you in advance

Movies are currently a one time download. Because of this, it is your responsibility to back them up so when something like this happens, you can simply copy them over the new drive.
You can't download them again with purchasing once again.

How much does Premiere Pro and After Effects rely on the hard drive it's installed on?

This may be a really dumb question, but how much does Premiere Pro and After Effects rely on the hard drive it's installed on if all your video files, assets, disk cache, etc are on different drives than the one the program itself is installed on?
The reason I am asking is that I currently have a "relatively" slow Sata II SSD for my C drive that has just my OS (windows 7 64bit) and programs (adobe editing programs, no games) installed on it and nothing else. All of the files used in my projects are saved on either a very fast Sata III SSD or a slower HDD depending on what the files are. For example, disk cache on the Sata III, stills on the HDD.
Being cyber monday I have the opportunity to buy another very fast Sata III SSD to replace my current Sata II SSD C Drive (just OS and programs). Both synthetic and real world benchmarks show a near double in performance. I just want to know if anyone thinks the upgrade is even worth it because for all I know there won't be any increase in performance since no videos, still, cach, etc will be stored on the C Drive.
The alternative is to get a second monitor because I currently only use one 21" monitor.
I suppose another alternative would be to not buy anything on the cyber monday deals and just save money for something else.
Any advice or input would be greatly appreciated. Thanks!

Thanks Alex! I think you are right about not being able to notice the difference between the SSDs. I ended up finding a deal to get about $80 off a great monitor that I've been looking at for a while and decided to pull the trigger on it. I thought about it and realized that there have already been a bunch of times where I want to watch a tutorial on youtube and follow allong in AE or PrePro, but have to keep switching windows. I also frequently want to have my video preview on a separate monitor so I can have a taller timeline window. This monitor will help a lot with that. Thanks again for your help!

I am trying to re-install CS3 after having to replace my Hard drive, but it will not accept my serial

I am trying to re-install CS3 after having to replace my Hard drive, but it will not accept my serial #. How can I get it to allow me to continue using my software?

If you had registered your CS3, you can get the serial number from your Adobe account when you log in through the Adobe corporate web site. Just go to My Products to find it in your account.
Adobe applications show you a truncated s/n to discourage software piracy. Legitimate Adobe s/ns have 24 digits.

T400 Windows 7 or Vista Clean Install - Can't Detect Hard Drive

I've attempted to install Windows Vista x64 and Windows 7 x64 using retail copies of both OS's on my T400. Neither OS can find the hard drive during the install process. I've downloaded every driver possible from Lenovo and loaded them via USB during the install, with absolutely no luck. I've installed Ubuntu in the meantime to have a usable computer, but I really need Win7 on there, so I have to figure this out. Any solutions? (and telling me to go download the driver isn't going to help me). Also, I've messed around with the AHCI setting in the BIOS, but that didn't help either.
Solved!
Go to Solution.

Weird. Win 7 Pro 64 installed on my T400 without any issues that I can recall. I realize that doesn't help you much
I was doing a clean upgrade install using a Microsoft upgrade DVD over the top of a Vista installation.
Since you've already tried fiddling the ACHI/IDE mode the only other thing I can think is something about your initial disk partitioning or formatting (or lack of same) confused the installers. (I realize a confused MS installer is hard to imagine...)
Maybe fire up your Ubuntu live CD and dd some zeros to the first few sectors of your drive and try again. Or format the thing w/your choice of FAT32 partitions and see if that makes the installer(s) happier.
What model drive are you using? Is it the original drive (not that it should matter, mine wasn't)? What was installed on the machine initially?
Just pulling stuff out of my <....>,
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I installed a new bigger hard drive and now spotlight does not work with outlook to search for emails

My old hard drive was full so I went to an apple authorized provider to install a new bigger hard drive. They also moved the data and applications from my old drive to the new one. They did not use time capsule because their way was faster. After the installation I did have to reenter the product code key for Office 2011 for the Mac. However, now I find that I cannot do email spotlight searches in Outlook. When I put in the search - it comes up with no results. This is true no matter what the search. Any ideas of how to point spotlight to look in the email folders so I can do searches again. This is a feature I use daily - so I am concerned that I have lost this feature. Also, I am noticing that alot of the settings did not carry over to the new hard drive. Any help is greatly appreciated!

I would recommend starting over and migrate using your Time Capsule backup however DO NOT do it wirelessly, connect using an Ethernet Connection. If you upgraded to Lion from Snow Leopard then follow the instructions in this video, the kid is annoying but he knows what he's doing. Clean Install Of Snow Leopard video. Once you have installed and updated Snow Leopard then update using the 10.6.8 Update Combo, then log into the Mac App Store and re-install Lion and all it's updates. My guess this is an afternoons work.

Can programs be installed on an external hard drive with my mac pro?

Can programs be installed on an external hard drive. I am running low on space. Final Cut Pro X spins off the rendering files which takes a large chunk of space. Like to at least have those rendered files on an external drive, but can find that option to make it happen.
Hardware Overview:
   Model Name:   MacBook Pro
   Model Identifier:           MacBookPro10,2
   Processor Name:        Intel Core i5
   Processor Speed:       2.6 GHz
   Number of Processors:           1
   Total Number of Cores:           2
   L2 Cache (per Core):   256 KB
   L3 Cache:        3 MB
   Memory:          8 GB
   Boot ROM Version:     MBP102.0106.B07
   SMC Version (system):           2.6f59
   Serial Number (system):         C02L250VFFRP
   Hardware UUID:          B26BB020-5346-5A3E-BE36-8D63AAF041C4
   Sudden Motion Sensor:
   State: Enabled
   Hard Drive APPLE SSD SD256E:
Kent Mechem

Hello Ian. I am currently using Lion installed on a WD My Passport 500Gig drive connected to my MBPro via USB, which is still running 10.6.8. Like you I am not prepared to lose all my currently functioning Mac, but also like to see how the new OS runs before making the total switch, maybe when it gets to 10.7.2
So after you download Lion and select to run the installer it will show you which disk to install on, being the default SL drive you downloaded Lion with. But here you can click Other Disk and select the external HD. The installer will run and then boot into the external drive to complete the installation. From then on you can use Startup Disk or the Option key to select the preferred OS.

Installing Leopard on new hard drive

Want to replace HD on my dual 1.8 G5.
How do I go about starting, formatting and installing Leopard on a new blank drive.
My old drive is backed up on an external using TimeMachine.
After install I plan to pick and choose what to replace from TimeMachine.
Thanks for any help.

First:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Quit DU and return to the installer. Have your TM backup drive already connected. When installing you will be provided the opportunity to restore an old system from a TM backup. I believe this will appear after completing the Setup Assistant.
If your old drive is still functional then you can put it in an external enclosure, boot from it and clone it to the new drive after the new drive has been prepped per the above.

HT4718 I want to install a new internal hard drive for my Macbook (13in, Late 2009) and restore to factory settings. However, I want to keep my Mac OS X Snow Leopard.

I want to install a new internal hard drive for my Macbook (13in, Late 2009) and restore to factory settings. However, I want to keep my Mac OS X Snow Leopard., which I downloaded from the app store. How can I restore computer with the updated OS?

What I did on our two computers was partition the hard drive so that both Snow Leopard and Mountain Lion can be used on the computers. This allowed me to be able to retain/use older applications and games on the Snow Leopard partition. This will allow you to do a clean install of Mountain Lion on the newly created partition. The Mountain Lion installer has a button that allows you to select another drive so you don't install it over Snow Leopard. I cleverly name one partition Snow Leopard and the other one Mountain Lion so I wouldn't confuse the two (I never claimed to be smart).
To partition, you need to have sufficient free hard drive space (I suggest 50 GB minimum). Boot off the Snow Leopard DVD or the disks that came with the computer and use Disk Utility to partition your hard drive into two partitions. If you plan to make Mountain Lion your primary OS, then you can reduce the size of the Snow Leopard partition so most of the free hard drive space is available for Mountain Lion. While booted off the disk, you can install Snow Leopard on the partition you want it on.
Restart and download Mountain Lion, remembering to select the correct partition before installing. I would make a copy of the installer and move it out of the Applications folder because the installer self destructs.
After getting all that sorted out, I found that while booted in Mountain Lion I could access the Snow Leopard partition. That allowed me to drag files and applications from Snow Leopard to Mountain Lion. Applications that won't work with Mountain Lion will be grayed out with a slash through them.

How do I reinstall CS6 after putting in a new hard drive?

How do I reinstall CS6 after replaceing hard drive?

I don'T HAVE A DISK. i THINK i HAVE THE CLOUD.
In a message dated 11/19/2012 9:08:34 P.M. Mountain Standard Time,
[email protected] writes:
Re: How do I reinstall CS6 after putting in a new hard drive?
created by John Waller (http://forums.adobe.com/people/John+Waller) in
Downloading, Installing, Setting Up - View the full discussion
(http://forums.adobe.com/message/4860619#4860619)

Install data from external hard drive?

Hi, we have our old macbook data saved on external hard drive (old laptop had water damage but able to retrieve data). I now have new macbook, how do I install data from external hard drive to new macbook? Is it super easy? I didn't want to set up new laptop until I could understand how to install all our old data. Thanks

Do you have the appropriate cable to connect the external drive to to new Macbook?
If you do, the rest is easy. Connect the drive and start up the new Mac. The first steps in the setup will be to enter information about yourself, etc. etc. As you proceed you will be asked if you want to bring in data from another place. Just follow the directions, and the Mac Setup Assistant will do everything for you.
The critical part is making sure the external is corectly connected to the new computer.

I want to install Yosemite onto an external hard drive, and keep Snow Leopard installed on the internal hard drive. I want to be able to boot from either system, depending upon circumstance (at least until Yosemite is stable). Is this possible?

iMac, Model Identifier iMac12,1 with 121.5" screen, 2.8 GHz Intel Core i7 processor, 8 GB 1333 MHz DDR3 memory, 1 TB internal hard drive, running Snow Leopard 10.6.8 from internal drive.
I want to install Yosemite onto a 1 TB external hard drive (OWC) , and keep Snow Leopard installed on the internal hard drive. I want to be able to boot from either system, depending upon circumstance (at least until Yosemite is stable). Is this possible?

It is possible. I'll let you read some articles that cover the setup:
Starting from an external USB storage device (Intel-based Macs) - Apple Support
or
http://osxdaily.com/2013/06/22/boot-mac-external-drive/

T400 Dead After Installing 7,200 RPM Hard Drive - Twice! (2764-CTO)

Similar Messages

Maybe you are looking for