T400 does not turn on after bios update.

Hi there people,
Sorry if this has been posted before,
Basically done a bios update and now the laptop does not turn on, there is just a blank screen. Can hear fan/processor running but nothing else.
Any help will be appreciated.
Thank you.

try taking out the ram, and restart the laptop without it, does it beep?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

Vaio Flip does not turn on after BIOS update

Hello Community, I'm using Sony Vaio Flip 13'' (SVF13N13CXB) for about a year.Yesterday I decided to upgrade my firmware to address noisy fan etc. So I got update utility from Sony website, launched it, got prompt to reboot my PC to continue upgrading process. After rebooting I got a Vaio logo and progress indicator rolling. After reching 66% it stuck. I waited for about an hour, there was no progress, so I had to power off my PC (hold power button for 5 seconds).Now when I try to power it on using Power or Assistance buttons, it will turn on the green led, fan starts making some noise, and thats it. Screen is blank. I searched throught this site, tried to press battery button at the bottom with clip, discunnecting/connecting power adater, etc, etc. Unfortunatelly nothing helps.I assume the BIOS is now corrupted (I may be wrong although). Please can you suggest how can I recover the firmware to factory state? Thank you, Vitalii

Hi vetooon,
Welcome to Sony Community!
It looks like your laptop is already corrupted. Please follow the steps below to troubleshoot your computer.
Power Cycle the computer by poking the battery reset hole [4] for about 15-20 mins with the laptop unplug.
2. Plug it back in then press the power button. If issue persist proceed to the next step .
3. Press and hold the power button for 3-5 mins or until its completely off.
4. Press the "ASSIST" button. When you see the "Vaio care Rescue mode" page, select F2 to go to BIOS then reset it to default.
5. Go back to "Vaio care Rescue mode" page, we'll check if you have a Restore Point so we can go back to an earlier date. On step #7 instead of choosing the "Recovery and Maintain" choose the Advance Option, then choose the current operating system of your pc (ex. Windows 8)
6. If issue still persist then click on this link and follow the instructions carefully. Please take note that on this process you will go back to factory setting and all the files will be deleted. You can seek the assistance of a professional technician to retrieve your files.
I hope this helps you.
Regards,
Jen
If my post answers your question, please mark it as "Accept as Solution"

Satellite A series does not start up after BIOS update

After bios update with downloaded utility my notebook does not start up.
Did this case covered by warranty?

Im not quite sure if this would be covered by warranty. You should contact the ASP in your country for details but I presume its not covered.
PS: Did you try this workaround:
- remove battery, disconnect the AC adaptor
- wait ~ 40min
- connect both devices again and try to power up the notebook

Laptop not turning on after bios update

My laptop isn't turning on at all, not even screen. Started occuring after I installed some updates through hp support one of which was a bios update.
Please help.
Model: HP Pavilion DV6-7029tx
Windows 7

Try testing the Hard Drive. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00439024&cc=us&dlc=en&lc=en&product=3816360&tmp...
If this doesn't work take the Hard Drive out.
https://www.youtube.com/watch?v=y6agiCGktwA
Then test it again. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00439024&cc=us&dlc=en&lc=en&product=3816360&tmp...
Let me know if it allows you in the BIOS.
If not it could be the Motherboard giving you the issue.
Also, try restoring the BIOS.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02693833&tmp_task=solveCategory&cc=us&dlc=en&la...
THX

T440s will not turn on after BIOS update

I have been using Windows 10 Pro 64bit for a month with only 1 persistent issue which was that the Intel Management Engine would give errors that it wouldn't shake hands with the firmware. The event error stated it was related to MEIx64. I've tried several different drivers, and different versions of Intel Management Engine but still had the same issue. So I decided to update my bios as I was on the 2.17 version. I followed the instructions step-by-step including deregistering from AMT or something in the bios. Once I ran the update utlitiy as admin within Windows it began the update and then the laptop completely shut down. So I left it for a little bit thinking it was doing something. It never turned on and now it still won't turn on. The screen will stay black, no backlight at all of any kind. The power LED on the power button turns on (and the keyboard lights) for about 3 seconds then it turns off and makes a quiet pop sound. It then turns on automatically but with the same issue of no LCD screen, no backlight, then after about 20-30 seconds it turns off making the pop sound again. Also, when I plug the AC power in, the power LED blinks 3 times. Not sure if this is normal or not. I've tried removing battery and AC, pressing power button 10 times at 1 second intervals and then holding power button for 30 seconds to no avail. I've tried the emergency reset button on the bottom of the laptop. I've unplugged the CMOS battery for about 30 seconds and tried again, all to no avail. I've also tried putting a bootable CD in my external CD drive to no avail. I do have an active warranty (3EZ - depot) until 2017. Is there ANYTHING else I can do to get this thing fixed???? PS - It appears to have an internal backup battery which I have not taken out. I'm trying to avoid having to really open this thing up and start removing stuff. Thanks

Haven't gotten a reply at all so I filled out a service request and Lenovo shipped a box to put my laptop in and it ships today next day air. Thank goodness for warranties.

SWR50 It does not turn on after the update

Greetings
After the last update with PC, when trying to turn on the device, showing boot-animation, but without success. I left on for a long time.
Repeat the update, at the moment, it is not possible ("update is not required").
Before this device is working properly, and updated via the PC correctly.
Earlier and now to update device used Sony PC Companion 2.1.
Thank you for your attention.

@DooMeRocK
What if you connect the SW3 to a wall charger > press and hold power for 15 seconds > let it charge for an hour. or use PCC or Bridge to repair it.
PC Companion (PCC)
Bridge (for Mac)
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Satellite Pro A300-1DZ does not find HDD after BIOS update

Hi everyone,
I have recently purchased a secondhand Satellite Pro A300 1DZ.
Put a fresh copy of Windows xp home on it.
I then went on to install all the drivers needed from Toshiba's own site and at the end of this I thought it may be a good idea to update the bios????
OH DEAR what a big mistake.
Now the netbook will NOT start windows.
So I thought thats ok I will just start from the begginning and reinstall windows again, but it is telling me it cannot find a hard disk on my netbook?
aaaaaaaaaaaaaaahhhhhhhhhhhhhhh I am going crazy,
Could someone please tell me how to fix this? Thank you x

Hi
I think the option SATA mode has been set to AHCI and therefore the Windows XP cannot find the HDD.
This is because of the SATA controller.
You can set the SATA mode from AHCI mode to compatible mode and this will allows you to install the Win XP on the notebook without the usage of SATA drivers.
So, youve got two options if you want to install Win XP:
AHCI mode -> but you have to include SATA drivers
Compatible mode -> Win XP installation possible without the SATA drivers

Re: Satellite A135-S7403 does not pass POST after BIOS update

Hello
I have A135-S7403, i know that it's old but i worked good until i install a new Bios version (1.90 for Satellite A130 (PSAD0U/PSAD3U) from the official Toshiba site(here: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1854878& rpn=PSAD0U&modelFilter=&selCategory=3&selFamily=10 73768663).
Everything installed without any problems but when i restart laptop it doesn't start.
It freezes on screen with red inscription "In touch with tomorrow TOSHIBA" and i can do nothing.
What should i do? And why this official update broke down my computer?

Sounds like I'm having exactly that problem. Today I update the Bios of A135-S4477 with the official update download from toshiba support. Things works fine and the screen says smt like "sucessful... your pc will shutdown in 10 seconds" then I saw a small popup says smt like "if the keyboard or mouse doesn't work.... bla bla bla" I doesn't finish my reading when the whole system goes off but I think everything is ok at that time.
When I try booting up the system. It's freezed at the "in touch with toshiba". F2 or F12 cannot function. I had no choice but brought that to the local service, unfortunately they cannot fix it and they have to send it to another center in another city. Actually I don't know what happen to my laptop since I did follow the instruction of the official download. What are the cases that can happen? what is the worst case and what about the best case? how much will I be charged?
Thanks in advance for any help.

Ipad does not turn off after ios7 update

I recently updated my ipad 2 to the iOS 7.3 update. I left it alone to update because I knew it would take some time. I set it up and then had to leave my ipad to take care of my baby. I came back and it wouldn't turn on. I figured it had run out of juice so I charged it all day today and it still won't turn on.

Try rebooting...
press and hold the home and power buttons until the Apple icon is displayed, then let go.

T400 does NOT wake up after going to sleep

T400 does not wake up after going into sleep. It goes to sleep ok but everytime wheni try to wake it, it restart the whole system instead of waking up.
I have checked the BIOS Security setting and it already set on Active. All drivers are upto date.
Please help!!
Message Edited by farooqjilani on 03-09-2009 08:23 AM

I have a similar issue with a T400 (xp sp2).
suddenly, it won´t come back from sleep. i have to press & hold the power button to turn off the computer, and then press again to turn it on from scratch.

HT201412 my ipod touch does not turn on after steps 1-4. It only shows the apple logo and then turns off

my ipod touch does not turn on after steps 1-4. It only shows the apple logo and turns off

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Iphone 3gs does not turn on after ios 6 update

After the ios6 update, my iphone 3gs does not turn on. I see the apple logo, after a minute, it boots again and i see the logo again. This process seems to continue like a circle. After a search the net, i see that i am not the only one. A quick fix and suggestions please, as i need my phone of course.
Btw, Apple, i know that this is an old hardware and i will buy the new iphone 5 when it is available here in my country in December. But of course, you claşmed this update supports my 3gs, you should immediately find a fix
Regards..

Well, i don't see an another solution possible; you should try again and again to restore. Btw, my phone seemed to operate strange (even the stock mail app began to crash) so i tried hard reset (home button + sleep/wake button until seeing the apple logo). After that i found my phone again in dfu mode this night so began restoring again now.
It seems that apple didn't tested ios6 enough with the 3GS. I have a 32 GB phone so this will be near 60 gb download from the icloud over my broadband connection.

HT4623 my iphone does not turn on after update to ios 7

Kindly help me to solve this problem
I updated my iphone to the new ios 7
but the iphone does not turn on
when i turn on it gives Hello slide to set up
then after that it shows the message connect to itunes
i connected and restored the backup
synczed already
but the iphone does not turn on
only showing the message 'connect to itunes"

Something has become corrupted hold down the Home and Power Button whilst plugged into Computer and with iTunes open it should then find a iPhone in recovery mode reinstall the software and the back up it sounds like the back up had something wrong and has put this on to the new install.

Iphone does not turn on after update to ios 7

My iphone dies not turn on after update to ios 7
it keeps showing the message : (connect to itunes)

What type of computer do you have?
Were you updated to the latest version of iTunes?
You may need to follow these steps:
http://support.apple.com/kb/TS3281?viewlocale=en_US
Good luck!

Laptop screen does not turn on after resume from suspend/hibernate

I use systemctl suspend/hibernate to resume, but the screen does not turn on from resume. everything else still functions just fine, meaning i can type in reboot and reboot, but a "turned off" black screen.
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek [Radeon HD 6520G]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 13)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0)
00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1)
00:15.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 2)
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
04:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-1-ARCH (builduser@tobias) (gcc version 4.9.2 20150204 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Feb 9 07:08:20 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70f3d39a-cd3c-4127-84d2-9af3430201ab rw quiet rootfstype=xfs i8042.nomux=1 i8042.reset
[ 0.000000] tseg: 009ff00000
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009f8f4fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f8f5000-0x000000009f939fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f93a000-0x000000009f951fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009f952000-0x000000009f954fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f955000-0x000000009f955fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f956000-0x000000009f96cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f96d000-0x000000009f974fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f975000-0x000000009f9a4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f9a5000-0x000000009f9a5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f9a6000-0x000000009f9b5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f9b6000-0x000000009f9c3fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f9c4000-0x000000009f9c5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f9c6000-0x000000009f9ccfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f9cd000-0x000000009fa02fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009fa03000-0x000000009fc05fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009fc06000-0x000000009fd78fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009fd79000-0x000000009fef5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009fef6000-0x000000009fefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: TOSHIBA Satellite L775D/TKBSS, BIOS 1.40 07/22/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF00000000 write-back
[ 0.000000] 1 base 009FF00000 mask FFFFF00000 uncachable
[ 0.000000] 2 base 00A0000000 mask FFE0000000 uncachable
[ 0.000000] 3 base 00C0000000 mask FFC0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000023f000000 aka 9200M
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0x9ff00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9ff00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcf30-0x000fcf3f] mapped at [ffff8800000fcf30]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23ee00000-0x23effffff]
[ 0.000000] [mem 0x23ee00000-0x23effffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x220000000-0x23edfffff]
[ 0.000000] [mem 0x220000000-0x23edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
[ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9f8f4fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9f7fffff] page 2M
[ 0.000000] [mem 0x9f800000-0x9f8f4fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9f955000-0x9f955fff]
[ 0.000000] [mem 0x9f955000-0x9f955fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9f9a6000-0x9f9b5fff]
[ 0.000000] [mem 0x9f9a6000-0x9f9b5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9fc06000-0x9fd78fff]
[ 0.000000] [mem 0x9fc06000-0x9fd78fff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9fef6000-0x9fefffff]
[ 0.000000] [mem 0x9fef6000-0x9fefffff] page 4k
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x1ffffffff]
[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
[ 0.000000] [mem 0x100200000-0x13fffffff] page 2M
[ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x37652000-0x37b20fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 TOSASU)
[ 0.000000] ACPI: XSDT 0x000000009F93A070 000064 (v01 TOSASU TOSASU00 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009F94E438 0000F4 (v04 TOSASU TOSASU00 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-649)
[ 0.000000] ACPI: DSDT 0x000000009F93A168 0142CF (v02 TOSASU TOSASU00 00000140 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000009F9C6F80 000040
[ 0.000000] ACPI: APIC 0x000000009F94E530 000072 (v03 TOSASU TOSASU00 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x000000009F94E5A8 0000C1 (v01 TOSASU TOSASU00 01072009 AMI. 00000004)
[ 0.000000] ACPI: SLIC 0x000000009F94E670 000176 (v01 TOSASU TOSASU00 01072009 MSFT 00000001)
[ 0.000000] ACPI: MCFG 0x000000009F94E7E8 00003C (v01 A M I GMCH945. 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000009F94E828 000038 (v01 TOSASU TOSASU00 01072009 AMI 00000004)
[ 0.000000] ACPI: SSDT 0x000000009F94E860 000E34 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009F94F698 00193D (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23eff8000-0x23effbfff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x9f8f4fff]
[ 0.000000] node 0: [mem 0x9f955000-0x9f955fff]
[ 0.000000] node 0: [mem 0x9f9a6000-0x9f9b5fff]
[ 0.000000] node 0: [mem 0x9fc06000-0x9fd78fff]
[ 0.000000] node 0: [mem 0x9fef6000-0x9fefffff]
[ 0.000000] node 0: [mem 0x100001000-0x23effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23effffff]
[ 0.000000] On node 0 totalpages: 1960479
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10155 pages used for memmap
[ 0.000000] DMA32 zone: 649859 pages, LIFO batch:31
[ 0.000000] Normal zone: 20416 pages used for memmap
[ 0.000000] Normal zone: 1306623 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f8f5000-0x9f939fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f93a000-0x9f951fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f952000-0x9f954fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f956000-0x9f96cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f96d000-0x9f974fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f975000-0x9f9a4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9a5000-0x9f9a5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9b6000-0x9f9c3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9c4000-0x9f9c5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9c6000-0x9f9ccfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9cd000-0x9fa02fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa03000-0x9fc05fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fd79000-0x9fef5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ff00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0x9ff00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023ec00000 s86336 r8192 d32448 u524288
[ 0.000000] pcpu-alloc: s86336 r8192 d32448 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1929823
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70f3d39a-cd3c-4127-84d2-9af3430201ab rw quiet rootfstype=xfs i8042.nomux=1 i8042.reset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7635708K/7841916K available (5531K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 206208K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:456 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1397.380 MHz processor
[ 0.000043] Calibrating delay loop (skipped), value calculated using timer frequency.. 2795.20 BogoMIPS (lpj=4657933)
[ 0.000046] pid_max: default: 32768 minimum: 301
[ 0.000053] ACPI: Core revision 20141107
[ 0.000055] TOSHIBA Satellite detected - force copy of DSDT to local memory
[ 0.000123] ACPI: Forced DSDT copy: length 0x142CF copied locally, original unmapped
[ 0.015021] ACPI: All ACPI Tables successfully acquired
[ 0.016280] Security Framework initialized
[ 0.016286] Yama: becoming mindful.
[ 0.016907] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.019182] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.020189] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.020201] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.020472] Initializing cgroup subsys memory
[ 0.020479] Initializing cgroup subsys devices
[ 0.020482] Initializing cgroup subsys freezer
[ 0.020484] Initializing cgroup subsys net_cls
[ 0.020487] Initializing cgroup subsys blkio
[ 0.020510] CPU: Physical Processor ID: 0
[ 0.020511] CPU: Processor Core ID: 0
[ 0.020513] mce: CPU supports 6 MCE banks
[ 0.020522] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 1024, 2MB 128, 4MB 64, 1GB 0
[ 0.020644] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
[ 0.021880] ftrace: allocating 21166 entries in 83 pages
[ 0.035456] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068473] smpboot: CPU0: AMD A6-3400M APU with Radeon(tm) HD Graphics (fam: 12, model: 01, stepping: 00)
[ 0.174081] Performance Events: AMD PMU driver.
[ 0.174086] ... version: 0
[ 0.174087] ... bit width: 48
[ 0.174088] ... generic registers: 4
[ 0.174089] ... value mask: 0000ffffffffffff
[ 0.174090] ... max period: 00007fffffffffff
[ 0.174091] ... fixed-purpose events: 0
[ 0.174092] ... event mask: 000000000000000f
[ 0.191034] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.197738] x86: Booting SMP configuration:
[ 0.197744] .... node #0, CPUs: #1 #2 #3
[ 0.250891] x86: Booted up 1 node, 4 CPUs
[ 0.250896] smpboot: Total of 4 processors activated (11183.83 BogoMIPS)
[ 0.252264] devtmpfs: initialized
[ 0.257696] PM: Registering ACPI NVS region [mem 0x9f8f5000-0x9f939fff] (282624 bytes)
[ 0.257715] PM: Registering ACPI NVS region [mem 0x9f952000-0x9f954fff] (12288 bytes)
[ 0.257718] PM: Registering ACPI NVS region [mem 0x9f96d000-0x9f974fff] (32768 bytes)
[ 0.257721] PM: Registering ACPI NVS region [mem 0x9f9a5000-0x9f9a5fff] (4096 bytes)
[ 0.257724] PM: Registering ACPI NVS region [mem 0x9f9b6000-0x9f9c3fff] (57344 bytes)
[ 0.257727] PM: Registering ACPI NVS region [mem 0x9f9c6000-0x9f9ccfff] (28672 bytes)
[ 0.257729] PM: Registering ACPI NVS region [mem 0x9fa03000-0x9fc05fff] (2109440 bytes)
[ 0.258125] pinctrl core: initialized pinctrl subsystem
[ 0.258173] RTC time: 18:50:52, date: 02/22/15
[ 0.258343] NET: Registered protocol family 16
[ 0.270952] cpuidle: using governor ladder
[ 0.284279] cpuidle: using governor menu
[ 0.284490] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.284493] ACPI: bus type PCI registered
[ 0.284495] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.284605] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.284608] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.285035] PCI: Using configuration type 1 for base access
[ 0.299021] ACPI: Added _OSI(Module Device)
[ 0.299025] ACPI: Added _OSI(Processor Device)
[ 0.299027] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.299029] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.300870] ACPI : EC: EC description table is found, configuring boot EC
[ 0.302900] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.831121] ACPI: Interpreter enabled
[ 0.831132] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.831140] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.831167] ACPI: (supports S0 S3 S4 S5)
[ 0.831169] ACPI: Using IOAPIC for interrupt routing
[ 0.831382] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.842727] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.842738] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.843157] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.843782] PCI host bridge to bus 0000:00
[ 0.843788] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.843792] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.843796] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.843800] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.843803] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.843806] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.843810] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.843813] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.843825] pci 0000:00:00.0: [1022:1705] type 00 class 0x060000
[ 0.843978] pci 0000:00:01.0: [1002:9647] type 00 class 0x030000
[ 0.843993] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.844002] pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
[ 0.844011] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.844070] pci 0000:00:01.0: supports D1 D2
[ 0.844185] pci 0000:00:01.1: [1002:1714] type 00 class 0x040300
[ 0.844197] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
[ 0.844272] pci 0000:00:01.1: supports D1 D2
[ 0.844388] pci 0000:00:02.0: [1022:1707] type 01 class 0x060400
[ 0.844483] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.844641] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.844665] pci 0000:00:11.0: reg 0x10: [io 0xf190-0xf197]
[ 0.844678] pci 0000:00:11.0: reg 0x14: [io 0xf180-0xf183]
[ 0.844690] pci 0000:00:11.0: reg 0x18: [io 0xf170-0xf177]
[ 0.844703] pci 0000:00:11.0: reg 0x1c: [io 0xf160-0xf163]
[ 0.844715] pci 0000:00:11.0: reg 0x20: [io 0xf150-0xf15f]
[ 0.844728] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4e000-0xfeb4e7ff]
[ 0.844896] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.844914] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4d000-0xfeb4dfff]
[ 0.845044] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.845114] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.845138] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4c000-0xfeb4c0ff]
[ 0.845242] pci 0000:00:12.2: supports D1 D2
[ 0.845245] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.845313] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.845383] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.845400] pci 0000:00:13.0: reg 0x10: [mem 0xfeb4b000-0xfeb4bfff]
[ 0.845529] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.845599] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.845623] pci 0000:00:13.2: reg 0x10: [mem 0xfeb4a000-0xfeb4a0ff]
[ 0.845727] pci 0000:00:13.2: supports D1 D2
[ 0.845730] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.845799] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.845867] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.846051] pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
[ 0.846069] pci 0000:00:14.1: reg 0x10: [io 0xf140-0xf147]
[ 0.846081] pci 0000:00:14.1: reg 0x14: [io 0xf130-0xf133]
[ 0.846094] pci 0000:00:14.1: reg 0x18: [io 0xf120-0xf127]
[ 0.846107] pci 0000:00:14.1: reg 0x1c: [io 0xf110-0xf113]
[ 0.846119] pci 0000:00:14.1: reg 0x20: [io 0xf100-0xf10f]
[ 0.846145] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.846148] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.846151] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.846154] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.846275] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.846303] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.846387] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.846454] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.846515] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.846704] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.846806] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.846879] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[ 0.846982] pci 0000:00:15.0: supports D1 D2
[ 0.847053] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.847122] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
[ 0.847225] pci 0000:00:15.1: supports D1 D2
[ 0.847296] pci 0000:00:15.1: System wakeup disabled by ACPI
[ 0.847363] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
[ 0.847466] pci 0000:00:15.2: supports D1 D2
[ 0.847537] pci 0000:00:15.2: System wakeup disabled by ACPI
[ 0.847610] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
[ 0.847628] pci 0000:00:16.0: reg 0x10: [mem 0xfeb49000-0xfeb49fff]
[ 0.847757] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.847827] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
[ 0.847851] pci 0000:00:16.2: reg 0x10: [mem 0xfeb48000-0xfeb480ff]
[ 0.847956] pci 0000:00:16.2: supports D1 D2
[ 0.847959] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.848026] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.848093] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.848228] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.848359] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.848490] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.848632] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.848762] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.848892] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.849021] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.849252] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.849360] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.849372] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.849376] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.849379] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.849383] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.849387] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.849390] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.849394] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.849483] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.849617] pci 0000:04:00.0: [10ec:8176] type 00 class 0x028000
[ 0.849646] pci 0000:04:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.849687] pci 0000:04:00.0: reg 0x18: [mem 0xfea00000-0xfea03fff 64bit]
[ 0.849834] pci 0000:04:00.0: supports D1 D2
[ 0.849837] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.849878] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.854467] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.854488] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.854499] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.854661] pci 0000:05:00.0: [10ec:8136] type 00 class 0x020000
[ 0.854688] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.854722] pci 0000:05:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.854743] pci 0000:05:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.854860] pci 0000:05:00.0: supports D1 D2
[ 0.854863] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.854907] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.861144] pci 0000:00:15.2: PCI bridge to [bus 05]
[ 0.861165] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
[ 0.861180] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.861237] acpi PNP0A03:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.861791] ACPI: PCI Interrupt Link [LN24] (IRQs *24)
[ 0.861823] ACPI: PCI Interrupt Link [LN25] (IRQs *25)
[ 0.861855] ACPI: PCI Interrupt Link [LN26] (IRQs *26)
[ 0.861887] ACPI: PCI Interrupt Link [LN27] (IRQs *27)
[ 0.861918] ACPI: PCI Interrupt Link [LN28] (IRQs *28)
[ 0.861951] ACPI: PCI Interrupt Link [LN29] (IRQs *29)
[ 0.861981] ACPI: PCI Interrupt Link [LN30] (IRQs *30)
[ 0.862011] ACPI: PCI Interrupt Link [LN31] (IRQs *31)
[ 0.862041] ACPI: PCI Interrupt Link [LN32] (IRQs *32)
[ 0.862071] ACPI: PCI Interrupt Link [LN33] (IRQs *33)
[ 0.862101] ACPI: PCI Interrupt Link [LN34] (IRQs *34)
[ 0.862130] ACPI: PCI Interrupt Link [LN35] (IRQs *35)
[ 0.862160] ACPI: PCI Interrupt Link [LN36] (IRQs *36)
[ 0.862190] ACPI: PCI Interrupt Link [LN37] (IRQs *37)
[ 0.862219] ACPI: PCI Interrupt Link [LN38] (IRQs *38)
[ 0.862249] ACPI: PCI Interrupt Link [LN39] (IRQs *39)
[ 0.862279] ACPI: PCI Interrupt Link [LN40] (IRQs *40)
[ 0.862309] ACPI: PCI Interrupt Link [LN41] (IRQs *41)
[ 0.862338] ACPI: PCI Interrupt Link [LN42] (IRQs *42)
[ 0.862368] ACPI: PCI Interrupt Link [LN43] (IRQs *43)
[ 0.862398] ACPI: PCI Interrupt Link [LN44] (IRQs *44)
[ 0.862428] ACPI: PCI Interrupt Link [LN45] (IRQs *45)
[ 0.862457] ACPI: PCI Interrupt Link [LN46] (IRQs *46)
[ 0.862487] ACPI: PCI Interrupt Link [LN47] (IRQs *47)
[ 0.862517] ACPI: PCI Interrupt Link [LN48] (IRQs *48)
[ 0.862546] ACPI: PCI Interrupt Link [LN49] (IRQs *49)
[ 0.862576] ACPI: PCI Interrupt Link [LN50] (IRQs *50)
[ 0.862606] ACPI: PCI Interrupt Link [LN51] (IRQs *51)
[ 0.862635] ACPI: PCI Interrupt Link [LN52] (IRQs *52)
[ 0.862665] ACPI: PCI Interrupt Link [LN53] (IRQs *53)
[ 0.862695] ACPI: PCI Interrupt Link [LN54] (IRQs *54)
[ 0.862726] ACPI: PCI Interrupt Link [LN55] (IRQs *55)
[ 0.862781] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.862883] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.862986] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863084] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863164] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863228] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863292] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863356] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.864141] ACPI : EC: GPE = 0xc, I/O: command/status = 0x66, data = 0x62
[ 0.864446] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.864452] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.864464] vgaarb: loaded
[ 0.864466] vgaarb: bridge control possible 0000:00:01.0
[ 0.864788] PCI: Using ACPI for IRQ routing
[ 0.874741] PCI: pci_cache_line_size set to 64 bytes
[ 0.874840] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.874844] e820: reserve RAM buffer [mem 0x9f8f5000-0x9fffffff]
[ 0.874848] e820: reserve RAM buffer [mem 0x9f956000-0x9fffffff]
[ 0.874851] e820: reserve RAM buffer [mem 0x9f9b6000-0x9fffffff]
[ 0.874854] e820: reserve RAM buffer [mem 0x9fd79000-0x9fffffff]
[ 0.874856] e820: reserve RAM buffer [mem 0x9ff00000-0x9fffffff]
[ 0.874859] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
[ 0.875079] NetLabel: Initializing
[ 0.875081] NetLabel: domain hash size = 128
[ 0.875083] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.875101] NetLabel: unlabeled traffic allowed by default
[ 0.875143] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.875149] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.877246] Switched to clocksource hpet
[ 0.884868] pnp: PnP ACPI init
[ 0.885072] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.885079] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.886017] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.886021] system 00:01: [io 0x040b] has been reserved
[ 0.886025] system 00:01: [io 0x04d6] has been reserved
[ 0.886029] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.886032] system 00:01: [io 0x0c14] has been reserved
[ 0.886036] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.886039] system 00:01: [io 0x0c52] has been reserved
[ 0.886042] system 00:01: [io 0x0c6c] has been reserved
[ 0.886046] system 00:01: [io 0x0c6f] has been reserved
[ 0.886049] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.886052] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.886056] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.886059] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.886063] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.886067] system 00:01: [io 0x0800-0x089f] could not be reserved
[ 0.886070] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.886074] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.886082] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.886086] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.886091] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.886096] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.886100] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.886104] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.886107] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.886112] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.886116] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[ 0.886120] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.886180] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.886279] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.886283] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.886353] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.886420] system 00:05: [io 0x0240-0x0259] has been reserved
[ 0.886424] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.886523] pnp 00:06: Plug and Play ACPI device, IDs TOS0220 SYN1d00 SYN0002 PNP0f13 (active)
[ 0.886596] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.886784] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.887277] pnp: PnP ACPI: found 9 devices
[ 0.895955] pci 0000:00:02.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.895964] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.895969] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.896008] pci 0000:00:02.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.896012] pci 0000:00:02.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.896016] pci 0000:00:02.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.896026] pci 0000:00:02.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
[ 0.896039] pci 0000:00:02.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.896046] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.896051] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.896056] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
[ 0.896061] pci 0000:00:02.0: bridge window [mem 0xd0100000-0xd02fffff]
[ 0.896067] pci 0000:00:02.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.896073] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.896089] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.896103] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.896107] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.896114] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.896124] pci 0000:00:15.2: PCI bridge to [bus 05]
[ 0.896129] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
[ 0.896138] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.896147] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.896151] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.896154] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.896157] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.896160] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.896164] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.896167] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.896171] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.896174] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
[ 0.896178] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.896182] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
[ 0.896185] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
[ 0.896188] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
[ 0.896191] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
[ 0.896194] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.896198] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.896201] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.896205] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.896208] pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.896212] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.896215] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.896259] NET: Registered protocol family 2
[ 0.896597] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.896863] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.897301] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.897360] TCP: reno registered
[ 0.897379] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.897467] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.897618] NET: Registered protocol family 1
[ 0.897646] pci 0000:00:01.0: Video device with shadowed ROM
[ 1.838171] PCI: CLS 64 bytes, default 64
[ 1.838242] Unpacking initramfs...
[ 1.934095] Freeing initrd memory: 4924K (ffff880037652000 - ffff880037b21000)
[ 1.934107] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.934110] software IO TLB [mem 0x9b8f5000-0x9f8f5000] (64MB) mapped at [ffff88009b8f5000-ffff88009f8f4fff]
[ 1.934495] microcode: CPU0: patch_level=0x03000014
[ 1.934537] microcode: CPU1: patch_level=0x03000014
[ 1.934580] microcode: CPU2: patch_level=0x03000014
[ 1.934625] microcode: CPU3: patch_level=0x03000014
[ 1.934758] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 1.934766] LVT offset 0 assigned for vector 0x400
[ 1.934817] perf: AMD IBS detected (0x000000ff)
[ 1.934854] Scanning for low memory corruption every 60 seconds
[ 1.935293] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.935315] Initialise system trusted keyring
[ 1.935789] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.937285] zpool: loaded
[ 1.937288] zbud: loaded
[ 1.937658] VFS: Disk quotas dquot_6.5.2
[ 1.937709] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.937948] Key type big_key registered
[ 1.938436] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.938508] io scheduler noop registered
[ 1.938511] io scheduler deadline registered
[ 1.938546] io scheduler cfq registered (default)
[ 1.939375] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 1.939380] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 1.939399] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.939403] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 1.939421] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[ 1.939423] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 1.939428] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[ 1.939447] pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
[ 1.939449] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 1.939453] pcie_pme 0000:00:15.2:pcie01: service driver pcie_pme loaded
[ 1.939461] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.939494] pciehp 0000:00:02.0:pcie04: Slot #2 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 1.939528] pciehp 0000:00:02.0:pcie04: service driver pciehp loaded
[ 1.939533] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.939550] vesafb: mode is 1152x864x32, linelength=4608, pages=0
[ 1.939552] vesafb: scrolling: redraw
[ 1.939554] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.939576] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 3904k, total 3904k
[ 1.955978] Console: switching to colour frame buffer device 144x54
[ 1.972261] fb0: VESA VGA frame buffer device
[ 1.972328] GHES: HEST is not enabled!
[ 1.972535] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.973720] Linux agpgart interface v0.103
[ 1.973797] rtc_cmos 00:02: RTC can wake from S4
[ 1.973936] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.973964] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.973983] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.974434] TCP: cubic registered
[ 1.974593] NET: Registered protocol family 10
[ 1.975020] NET: Registered protocol family 17
[ 1.975476] Loading compiled-in X.509 certificates
[ 1.975502] registered taskstats version 1
[ 1.976231] Magic number: 3:326:848
[ 1.976341] rtc_cmos 00:02: setting system clock to 2015-02-22 18:50:54 UTC (1424631054)
[ 1.976444] PM: Hibernation image not present or could not be loaded.
[ 1.977023] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
[ 1.977027] Write protecting the kernel read-only data: 8192k
[ 1.977495] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
[ 1.977718] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
[ 1.979659] random: systemd urandom read with 1 bits of entropy available
[ 1.980307] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 1.980576] systemd[1]: Detected architecture 'x86-64'.
[ 1.980581] systemd[1]: Running in initial RAM disk.
[ 1.980590] systemd[1]: Running with unpopulated /etc.
[ 1.980603] systemd[1]: No hostname configured.
[ 1.980609] systemd[1]: Set hostname to <localhost>.
[ 1.980655] systemd[1]: Initializing machine ID from random generator.
[ 1.996373] systemd[1]: Populated /etc with preset unit settings.
[ 1.999327] systemd[1]: Unit type .busname is not supported on this system.
[ 2.003390] systemd[1]: Created slice -.slice.
[ 2.003412] systemd[1]: Starting -.slice.
[ 2.005054] systemd[1]: Listening on Journal Audit Socket.
[ 2.005188] systemd[1]: Created slice system.slice.
[ 2.005200] systemd[1]: Starting system.slice.
[ 2.005218] systemd[1]: Reached target Swap.
[ 2.005226] systemd[1]: Starting Swap.
[ 2.005288] systemd[1]: Listening on udev Control Socket.
[ 2.005296] systemd[1]: Starting udev Control Socket.
[ 2.005312] systemd[1]: Reached target Slices.
[ 2.005320] systemd[1]: Starting Slices.
[ 2.005335] systemd[1]: Reached target Local File Systems.
[ 2.005342] systemd[1]: Starting Local File Systems.
[ 2.005358] systemd[1]: Reached target Timers.
[ 2.005366] systemd[1]: Starting Timers.
[ 2.005398] systemd[1]: Listening on udev Kernel Socket.
[ 2.005409] systemd[1]: Starting udev Kernel Socket.
[ 2.005430] systemd[1]: Reached target Paths.
[ 2.005441] systemd[1]: Starting Paths.
[ 2.005497] systemd[1]: Listening on Journal Socket.
[ 2.005510] systemd[1]: Starting Journal Socket.
[ 2.006097] systemd[1]: Starting udev Coldplug all Devices...
[ 2.006689] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 2.006801] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.006811] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 2.006860] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.006870] systemd[1]: Starting Journal Socket (/dev/log).
[ 2.007428] systemd[1]: Starting Journal Service...
[ 2.007472] systemd[1]: Reached target Sockets.
[ 2.007494] systemd[1]: Starting Sockets.
[ 2.011399] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 2.012026] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 2.012842] systemd-journald[63]: Failed to set file attributes: Inappropriate ioctl for device
[ 2.016230] systemd[1]: Started Create Static Device Nodes in /dev.
[ 2.016999] systemd[1]: Starting udev Kernel Device Manager...
[ 2.021212] systemd[1]: Started udev Kernel Device Manager.
[ 2.024169] systemd[1]: Started udev Coldplug all Devices.
[ 2.029792] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.032026] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.032044] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.041719] SCSI subsystem initialized
[ 2.042505] ACPI: bus type USB registered
[ 2.042538] usbcore: registered new interface driver usbfs
[ 2.042552] usbcore: registered new interface driver hub
[ 2.042588] usbcore: registered new device driver usb
[ 2.044174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.045154] systemd[1]: Started Journal Service.
[ 2.045633] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.045840] ohci-pci: OHCI PCI platform driver
[ 2.045993] QUIRK: Enable AMD PLL fix
[ 2.046022] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 2.046033] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 2.046079] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4d000
[ 2.046697] ehci-pci: EHCI PCI platform driver
[ 2.047833] libata version 3.00 loaded.
[ 2.084196] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.102273] hub 1-0:1.0: USB hub found
[ 2.102287] hub 1-0:1.0: 5 ports detected
[ 2.102593] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 2.102600] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 2.102631] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4b000
[ 2.159071] hub 2-0:1.0: USB hub found
[ 2.159085] hub 2-0:1.0: 5 ports detected
[ 2.160195] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 2.160202] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 3
[ 2.160235] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb49000
[ 2.215699] hub 3-0:1.0: USB hub found
[ 2.215713] hub 3-0:1.0: 4 ports detected
[ 2.271489] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 2.271502] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 4
[ 2.271509] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.271523] ehci-pci 0000:00:12.2: debug port 1
[ 2.271574] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4c000
[ 2.281276] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.281694] hub 4-0:1.0: USB hub found
[ 2.281705] hub 4-0:1.0: 5 ports detected
[ 2.338086] hub 1-0:1.0: USB hub found
[ 2.338100] hub 1-0:1.0: 5 ports detected
[ 2.338571] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.338579] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 5
[ 2.338584] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.338596] ehci-pci 0000:00:13.2: debug port 1
[ 2.338634] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4a000
[ 2.347963] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.348396] hub 5-0:1.0: USB hub found
[ 2.348414] hub 5-0:1.0: 5 ports detected
[ 2.404806] hub 2-0:1.0: USB hub found
[ 2.404820] hub 2-0:1.0: 5 ports detected
[ 2.461536] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 2.461550] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 6
[ 2.461557] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.461571] ehci-pci 0000:00:16.2: debug port 1
[ 2.461611] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb48000
[ 2.471331] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.471768] hub 6-0:1.0: USB hub found
[ 2.471780] hub 6-0:1.0: 4 ports detected
[ 2.528139] hub 3-0:1.0: USB hub found
[ 2.528154] hub 3-0:1.0: 4 ports detected
[ 2.528415] ahci 0000:00:11.0: version 3.0
[ 2.528689] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.528693] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 2.529180] scsi host0: ahci
[ 2.529664] scsi host1: ahci
[ 2.529777] ata1: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e100 irq 28
[ 2.529781] ata2: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e180 irq 28
[ 2.530551] scsi host2: pata_atiixp
[ 2.530815] scsi host3: pata_atiixp
[ 2.530912] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
[ 2.530914] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
[ 2.654798] usb 5-4: new high-speed USB device number 2 using ehci-pci
[ 2.934859] tsc: Refined TSC clocksource calibration: 1397.458 MHz
[ 3.014908] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.014947] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.016183] ata1.00: ATA-8: Hitachi HTS547550A9E384, JE3OA60B, max UDMA/133
[ 3.016190] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.016972] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633F, TF01, max UDMA/100
[ 3.017307] ata1.00: configured for UDMA/133
[ 3.017807] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54755 A60B PQ: 0 ANSI: 5
[ 3.019278] ata2.00: configured for UDMA/100
[ 3.025787] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633F TF01 PQ: 0 ANSI: 5
[ 3.044649] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.044654] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.044859] sd 0:0:0:0: [sda] Write Protect is off
[ 3.044865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.044918] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.061859] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.061874] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.062232] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.084075] sda: sda1 sda2 sda3
[ 3.085567] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.414041] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 3.528901] XFS (sda1): Mounting V4 Filesystem
[ 3.710527] XFS (sda1): Ending clean mount
[ 3.935255] Switched to clocksource tsc
[ 3.999076] systemd-journald[63]: Received SIGTERM from PID 1 (systemd).
[ 4.799287] random: nonblocking pool is initialized
[ 6.377516] systemd-journald[187]: Failed to set file attributes: Inappropriate ioctl for device
[ 7.417234] ACPI: acpi_idle registered with cpuidle
[ 7.464892] acpi-cpufreq: overriding BIOS provided _PSD data
[ 7.544509] wmi: Mapper loaded
[ 7.612504] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 7.626522] acpi device:2b: registered as cooling_device4
[ 7.626631] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input2
[ 7.700708] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SMBX) (20141107/utaddress-258)
[ 7.700729] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.734642] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 7.737166] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.737173] ACPI: Thermal Zone [THRM] (50 C)
[ 7.746486] ACPI: Lid Switch [LID]
[ 7.746714] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 7.746725] ACPI: Power Button [SLPB]
[ 7.746874] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 7.746880] ACPI: Power Button [PWRF]
[ 7.749494] ACPI: Battery Slot [BAT0] (battery present)
[ 7.749951] ACPI: AC Adapter [AC0] (on-line)
[ 7.755509] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.961538] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 8.061752] [drm] Initialized drm 1.1.0 20060810
[ 8.296521] cfg80211: Calling CRDA to update world regulatory domain
[ 8.319199] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.319231] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 8.320035] r8169 0000:05:00.0 eth0: RTL8105e at 0xffffc90000032000, 38:60:77:69:8f:16, XID 00a00000 IRQ 29
[ 8.363138] kvm: Nested Virtualization enabled
[ 8.363151] kvm: Nested Paging enabled
[ 8.704039] [drm] radeon kernel modesetting enabled.
[ 8.794078] r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 8.832358] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 8.832364] AMD IOMMUv2 functionality not available on this system
[ 8.959092] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[ 8.961187] snd_hda_codec_hdmi: unknown parameter 'index' ignored
[ 8.965010] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card1/input8
[ 9.031523] media: Linux media interface: v0.10
[ 9.102014] CRAT table not found
[ 9.102024] Finished initializing topology ret=0
[ 9.102177] kfd kfd: Initialized module
[ 9.102941] checking generic (c0000000 3d0000) vs hw (c0000000 10000000)
[ 9.102951] fb: switching to radeondrmfb from VESA VGA
[ 9.103002] Console: switching to colour dummy device 80x25
[ 9.104030] [drm] initializing kernel modesetting (SUMO 0x1002:0x9647 0x1179:0xFC62).
[ 9.104059] [drm] register mmio base: 0xFEB00000
[ 9.104063] [drm] register mmio size: 262144
[ 9.104144] ATOM BIOS: Toshiba
[ 9.104219] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 9.104227] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 9.104231] [drm] Detected VRAM RAM=512M, BAR=256M
[ 9.104235] [drm] RAM width 32bits DDR
[ 9.104379] [TTM] Zone kernel: Available graphics memory: 3821360 kiB
[ 9.104390] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 9.104394] [TTM] Initializing pool allocator
[ 9.104407] [TTM] Initializing DMA pool allocator
[ 9.104455] [drm] radeon: 512M of VRAM memory ready
[ 9.104459] [drm] radeon: 1024M of GTT memory ready.
[ 9.104497] [drm] Loading SUMO Microcode
[ 9.124664] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 582762
[ 9.124685] psmouse serio1: synaptics: Toshiba Satellite L775D detected, limiting rate to 40pps.
[ 9.160285] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 9.170455] Linux video capture interface: v2.00
[ 9.179293] mousedev: PS/2 mouse device common for all mice
[ 9.223473] [drm] Internal thermal controller without fan control
[ 9.223622] [drm] Found smc ucode version: 0x00011200
[ 9.223730] [drm] radeon: dpm initialized
[ 9.266919] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 9.282200] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 9.282345] radeon 0000:00:01.0: WB enabled
[ 9.282349] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88009b70ac00
[ 9.282351] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88009b70ac0c
[ 9.283078] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010f32118
[ 9.283081] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.283082] [drm] Driver supports precise vblank timestamp query.
[ 9.283084] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 9.283121] radeon 0000:00:01.0: radeon: using MSI.
[ 9.283145] [drm] radeon: irq initialized.
[ 9.298245] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 9.298931] rtlwifi: rtlwifi: wireless switch is on
[ 9.299718] [drm] ring test on 0 succeeded in 1 usecs
[ 9.299728] [drm] ring test on 3 succeeded in 3 usecs
[ 9.307045] sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 9.307049] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.307053] sound hdaudioC0D2: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 9.307055] sound hdaudioC0D2: mono: mono_out=0x0
[ 9.307058] sound hdaudioC0D2: inputs:
[ 9.307061] sound hdaudioC0D2: Mic=0x18
[ 9.307065] sound hdaudioC0D2: Internal Mic=0x12
[ 9.315899] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/hdaudioC0D2/input9
[ 9.316387] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 9.316507] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 9.349814] [drm] ring test on 5 succeeded in 1 usecs
[ 9.369840] [drm] UVD initialized successfully.
[ 9.370279] [drm] ib test on ring 0 succeeded in 0 usecs
[ 9.370314] [drm] ib test on ring 3 succeeded in 0 usecs
[ 9.524205] rtl8192ce 0000:04:00.0 wlp4s0: renamed from wlan0
[ 9.769931] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - MP (04f2:b289)
[ 9.788893] input: TOSHIBA Web Camera - MP as /devices/pci0000:00/0000:00:13.2/usb5/5-4/5-4:1.0/input/input12
[ 9.789309] usbcore: registered new interface driver uvcvideo
[ 9.789319] USB Video Class driver (1.1.1)
[ 9.871399] cfg80211: World regulatory domain updated:
[ 9.871412] cfg80211: DFS Master region: unset
[ 9.871417] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9.871425] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.871431] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.871436] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.871441] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 9.871447] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 9.871453] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 9.871457] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.871463] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 9.890507] [drm] ib test on ring 5 succeeded
[ 9.911771] [drm] radeon atom DIG backlight initialized
[ 9.911776] [drm] Radeon Display Connectors
[ 9.911777] [drm] Connector 0:
[ 9.911779] [drm] VGA-1
[ 9.911780] [drm] HPD2
[ 9.911782] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 9.911783] [drm] Encoders:
[ 9.911784] [drm] CRT1: INTERNAL_UNIPHY2
[ 9.911786] [drm] CRT1: NUTMEG
[ 9.911787] [drm] Connector 1:
[ 9.911788] [drm] LVDS-1
[ 9.911789] [drm] HPD1
[ 9.911790] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 9.911791] [drm] Encoders:
[ 9.911792] [drm] LCD1: INTERNAL_UNIPHY2
[ 9.911793] [drm] LCD1: TRAVIS
[ 9.911794] [drm] Connector 2:
[ 9.911795] [drm] HDMI-A-1
[ 9.911796] [drm] HPD5
[ 9.911798] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 9.911799] [drm] Encoders:
[ 9.911800] [drm] DFP1: INTERNAL_UNIPHY1
[ 10.016569] [drm] fb mappable at 0xC0478000
[ 10.016576] [drm] vram apper at 0xC0000000
[ 10.016578] [drm] size 5787648
[ 10.016580] [drm] fb depth is 24
[ 10.016582] [drm] pitch is 6400
[ 10.016970] fbcon: radeondrmfb (fb0) is primary device
[ 10.078763] Adding 8388604k swap on /dev/sda2. Priority:-1 extents:1 across:8388604k FS
[ 10.143532] Console: switching to colour frame buffer device 200x56
[ 10.150308] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 10.150312] radeon 0000:00:01.0: registered panic notifier
[ 10.164191] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 0
[ 10.194853] cfg80211: Calling CRDA for country: US
[ 10.231380] cfg80211: Regulatory domain changed to country: US
[ 10.231393] cfg80211: DFS Master region: FCC
[ 10.231397] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 10.231406] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 10.231413] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[ 10.231419] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 10.231425] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[ 10.231429] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm), (0 s)
[ 10.231434] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 10.231439] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 10.422003] XFS (sda3): Mounting V5 Filesystem
[ 10.837256] XFS (sda3): Ending clean mount
[ 10.899226] systemd-journald[187]: Received request to flush runtime journal from PID 1
[ 11.195453] microcode: CPU0: new patch_level=0x03000027
[ 11.195496] microcode: CPU1: new patch_level=0x03000027
[ 11.195601] microcode: CPU2: new patch_level=0x03000027
[ 11.195693] microcode: CPU3: new patch_level=0x03000027
[ 12.465476] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 13.726328] wlp4s0: authenticate with 00:1e:2a:6f:46:f8
[ 13.745730] wlp4s0: send auth to 00:1e:2a:6f:46:f8 (try 1/3)
[ 13.753012] wlp4s0: authenticated
[ 13.755130] wlp4s0: associate with 00:1e:2a:6f:46:f8 (try 1/3)
[ 13.758031] wlp4s0: RX AssocResp from 00:1e:2a:6f:46:f8 (capab=0x411 status=0 aid=3)
[ 13.758283] wlp4s0: associated
[ 13.758302] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[ 23.961417] PM: Syncing filesystems ... done.
[ 24.305227] PM: Preparing system for mem sleep
[ 24.310243] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 24.311535] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 24.311542] PM: Entering mem sleep
[ 24.311898] Suspending console(s) (use no_console_suspend to debug)
[ 24.320753] wlp4s0: deauthenticating f

Suspend has always been problematic under Linux. It seems to be hit or miss for the most part, but here are some things you can try:
Use an LTS kernel, tuxonice, pm-utils, etc. See Suspend and Hibernate
Try a different graphics driver
Tweak the driver module parameters or build your own driver.
Unfortunately I don't have experience with the radeon driver, so I can only give you ideas.

T400 does not turn on after bios update.

Similar Messages

Maybe you are looking for