T400 doesn't hibernate after sleep (battery power)

t400 2765-A49 doesn't go to hibernation from sleep during battery power. When it's time to go to hibernation a click is heard and notebook stays in sleep mode. There's no problem during AC power. It goes to hibernation from sleep mode successfully.
I tried with Vista 32-bit and 7 64-bit. BIOS updated to the lastest one. Power Manager 2.42 and the latest 3.30. Please, tell me what other settings can I check/adjust to solve this problem?

> Where do you see the bug code when it happen?
in BlueScreenView
10 days ago, tried the first solution from here http://www.windowsxpregistrycleaner.com/windows-7-error-code-0x0000009F.html
after that no one crash
but my problem with the hibernation after sleeping on battery power still remained

Similar Messages

M3800 Developer Edition: wifi doesn't work after sleep

I have an M3800 Developer Edition (2015 model). Ubuntu is factory-installed 14.04, with hardware enablement stack installed. Recently (past 1-2 weeks) wifi doesn't work after sleep (lid closed or open doesn't matter), and only rebooting gets in back. Tried rmmod and modprobe with no success. Has anyone else seen this, and/or are you aware of any open bug(s) for this?
Relevant ouput:
lsmod when problem exists:
iwlmvm                217725 0
mac80211              652718 1 iwlmvm
iwlwifi               179412 1 iwlmvm
cfg80211              494362 3 iwlwifi,mac80211,iwlmvm
rfkill list when problem exists:
1: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
3: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no
rmmod the above, then modprobe iwlwifi. Does not fix problem, only rebooting does:
May 4 08:23:14 jonathan-m3800 kernel: [69089.189614] cfg80211: Calling CRDA to update world regulatory domain
May 4 08:23:14 jonathan-m3800 kernel: [69089.192181] cfg80211: World regulatory domain updated:
May 4 08:23:14 jonathan-m3800 kernel: [69089.192184] cfg80211: DFS Master region: unset
May 4 08:23:14 jonathan-m3800 kernel: [69089.192185] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192187] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192188] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192189] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192190] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192191] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.204141] Intel(R) Wireless WiFi driver for Linux, in-tree:
May 4 08:23:14 jonathan-m3800 kernel: [69089.204143] Copyright(c) 2003- 2014 Intel Corporation
May 4 08:23:14 jonathan-m3800 kernel: [69089.204414] iwlwifi 0000:06:00.0: irq 48 for MSI/MSI-X
May 4 08:23:14 jonathan-m3800 kernel: [69089.204904] iwlwifi 0000:06:00.0: loaded firmware version 25.228.9.0 op_mode iwlmvm
May 4 08:23:14 jonathan-m3800 kernel: [69089.207709] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
May 4 08:23:14 jonathan-m3800 kernel: [69089.207790] iwlwifi 0000:06:00.0: L1 Enabled - LTR Enabled
May 4 08:23:14 jonathan-m3800 kernel: [69089.208150] iwlwifi 0000:06:00.0: L1 Enabled - LTR Enabled
May 4 08:23:14 jonathan-m3800 kernel: [69089.392408] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
May 4 08:23:14 jonathan-m3800 NetworkManager[901]:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/wlan0, iface: wlan0)
May 4 08:23:14 jonathan-m3800 NetworkManager[901]:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): using nl80211 for WiFi device control
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): driver supports Access Point (AP) mode
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwlwifi' ifindex: 4)
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/2
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> rfkill5: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/ieee80211/phy0/rfkill5) (driver iwlwifi)
May 4 08:23:16 jonathan-m3800 ModemManager[852]: <warn> Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0': not supported by any plugin
lspci:
06:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)
After reboot:
lsmod |grep -i iwl:
iwlmvm                217725 0
mac80211              652718 1 iwlmvm
iwlwifi               179412 1 iwlmvm
cfg80211              494362 3 iwlwifi,mac80211,iwlmvm
rfkill list after reboot:
0: nfc0: NFC
        Soft blocked: no
        Hard blocked: no
1: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
2: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no

Wi-Fi still not reconnecting after sleep
http://forums.macrumors.com/showthread.php?t=1229591

After Sleep, and power off, Lion Crash Totaly! iMac core i5 2011

After Sleep, and power off, Lion Crash Totaly!
I`'ve buy a iMac core i5, July 15 2011, 500gb, 4gb (upgraded to 8gb Ram).
Transf my MBP with Snow at first iMac power on, after tranfer Snow, I buy the Lion, install and use until 2 weeks. After the first Sleep, turn Lion power off to change place. When power on, the Lion was Crashed the computer in some way that was impossible to recover or do anything. even go back the timemachine with Lion or Snow, trey clean PRAM, DVD Boot, nothing works.
So, I put a Ubuntu LiveCD, REMOVE COMPLETE THE GUID of iMac Disk, also clean the PRAM (cmd+opt+ P + R during boot), so, the iMac was Clean and I Install the SNOW (sure).
I just Lost the money and download time that spent to get with Lion?
How can I have a Lion DVD for when Apple fix the LOT OF PROBLEMS?
Have apple schedule for fix problems?

After Sleep, and power off, Lion Crash Totaly!
I`'ve buy a iMac core i5, July 15 2011, 500gb, 4gb (upgraded to 8gb Ram).
Transf my MBP with Snow at first iMac power on, after tranfer Snow, I buy the Lion, install and use until 2 weeks. After the first Sleep, turn Lion power off to change place. When power on, the Lion was Crashed the computer in some way that was impossible to recover or do anything. even go back the timemachine with Lion or Snow, trey clean PRAM, DVD Boot, nothing works.
So, I put a Ubuntu LiveCD, REMOVE COMPLETE THE GUID of iMac Disk, also clean the PRAM (cmd+opt+ P + R during boot), so, the iMac was Clean and I Install the SNOW (sure).
I just Lost the money and download time that spent to get with Lion?
How can I have a Lion DVD for when Apple fix the LOT OF PROBLEMS?
Have apple schedule for fix problems?

Windows 8.1 doesn't hibernate or sleep after installing amd catalyst driver

hi i am using windows 8.1 64 bit but after installing a amd catalyst center windows behaviour changed it doesn't go for hibernate and sleep and after unstall it windows comes into normal position please refered me proper solution to install amd driver wihout any issue and also suggest me which version will be compatible with my device i have tried amd 14.9 and also 14.11 but issues didn't solve i am curretnly using intel Version10.18.10.3325 windows update show me amd wddi 1.3 driver but it always failed not installing..
Hp pavilion-15 n037tx Notebook
core i5 4200U
4gb ram
This question was solved.
View Solution.

Hi @Ahmed-Aslam
I understand that you are have problems with hibernate and sleep on your notebook.
I would review the attached document. I realize from your post that you have tried some of the things listed, but just check it and see if anything there was missed, perhaps the section on malware issues.
Troubleshooting sleep and hibernate issues in Windows 8
You can also try using system restore to roll back to before the software update to see if that resolves the issue.
Using Microsoft System Restore (Windows 8)
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Wifi doesn't work after sleep

I'm having an issue where my wifi will stop working after sleep. This isn't the same problem where the network had to be manually reconnected--
The "radar" will be grayed out, and I can see the networks if I click on it, but I cannot reconnect, disable wifi (make the radar the pie shape). The only thing I can do is do a hard reset holding the power button until the computer shuts off.
In fact, if I select 'Apple -> Restart,' nothing happens. I have to hold the power button down.
Any thoughts?

Wi-Fi still not reconnecting after sleep
http://forums.macrumors.com/showthread.php?t=1229591

Sometimes my laptop doesn't hibernate when its battery got empty

Hi,
First of all:
I might be facing this issue if the battery is old and also if the Power Settings are corrupt.
The details of my problem:
Although the low battery notification is ON, and Critical battery level is 5%, low battery level is 10%, and critical battery action is 'hibernation', as this screens shot below, but sometimes my laptop does neither notify me with low battery level/ critical battery level nor does hibernate.
But with the same settings, some other times, it notifies me with the low battery level/ critical battery level, and then it hibernates if I don't plug it in.
the Power Settings are OK if we look at these screen shots.
This is strange, I am almost always used to using my laptop on a battery and with plugging in to the main supply power. But sometimes I forget to turn on the socket of the main supply power. And then, when my computer battery exhausts its charge, my laptop shouts down suddenly (without warning).
As a result, I loss all my data.
When I turn it on again after shutting down due to its exhausted battery, I see an error message that my computer shout down accidentally, and several options ranging from starting in safe mode to start up normally. Then I start it normal.
Sometimes, I've seen this notification while clicking on the icon of battery in the system tray. Although my battery was charging, in the notification in the screen shot below there's a cross mark on battery indicating to me that the battery needs to be replaced, which means the battery is corrupt.
In fact, I was advised that it is OK if I run my laptop on both battery and plug in. Thus, I have been used to running my laptop on both battery and plug in. However, I really noticed this destroyed my battery over time since it was lasting about three hours. However, it now became lasting an hour after it got full charged. I have a HP laptop (OEM). But the term(OEM) is really a misnomer because OEMs are not the original manufacturers; they are the customizers.
I don't think it is OK to run a laptop on both battery and plug in, do I?.
Thus, I don't know which type of battery I should buy if necessary.

Hi @cooperator ,
Thank you for visiting the HP Support Forums and Welcome. I will do my best to assist you. As there are many models of HP, I would need the model number. How Do I Find My Model Number or Product Number?
Please respond with which Operating System you are running:
Which Windows Operating System am I running?
Here are some links that might help improve your battery performance.
Calibrating the battery on your Notebook. I would restore the defaults that are in the first screen shot you provided.
Please let me know how things go.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

T400s Problems with screen after reconnection power.

I am happy for my T400s but is some times has screen issues when the power is plug in and it wakes up from sleep. I have some pictures of it.
Image 1
Video
Video of the problem
Is there a problem with the computer ?

I have this too. I believe it has to do with a changed power state (or however you call this) since the moment of suspension / hibernation. I think it's even reproducable:
1. Have your PC plugged on AC (respectively not)
2. Suspend / hibernate your PC
3. Unplug (respectively do connect to charger)
4. Resume & login, voilà!
So what I started doing is e.g. first unplug my laptop before I suspend and leave home... You can imagine.
A graphics driver issue?

Display doesn't work after sleeping.

I have a trouble, after I put my notebook in sleep mode, it doesn't wake up, but the leds are working. I have to shut it down manually from the button, that is not so good.

Hi @m1do ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion 15-n057sr Notebook PC and issues with the sleep mode. Here is a link that goes through some troubleshooting steps to resolve the sleep issues.
Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system making sure your system is up to date, as this could cause this same issue.
Please let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Rmbp 13" 2014 won't turn on after sleep battery drain

Hi peeps,
Today, my rmbp 13" from 2014 failed to start after it's battery ran dry while it was sleeping.
I have let it charge for a while (about 15 minutes) and then it wanted to turn on again.
My question is: is this normal behavior? I found another thread with kind of the same question but it was irrelative due to other issues being present in that particular thread.
Best regards,
IT07.

Possibly, but somethings may be left under the user's control.
About Batteries in Modern Apple Laptops
Battery University
Apple - Batteries - Notebooks
Apple - Batteries
Extending the Life of Your Laptop Battery
MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
Apple Portables- Calibrating your computer's battery for best performance
Mac notebooks- Determining battery cycle count

Safari doesn't connect after sleep

The last few days after the computer has not been attended (sleep), Safari will not connect to the WAN. It will however, connect to the LAN where I can see my printer, other computers and the router.
Along with this, iTunes will not connect to their store.
FireFox will connect to the WAN and LAN without any problem.
I have tried the following:
1. Restart Safari - doesn't fix it.
2. Clear Cookies - doesn't fix it.
3. Trash .plist - doesn't fix it.
4. Log out Log in - doesn't fix it.
5. Restart the computer - guess what? it fixes it.
I don't particularly like having to restart the computer everyday, I'll try a few other things like quitting all active programs before leaving the computer to sleep.
I'll go ahead and file with Feedback Tools and see if I get any response from Apple.

Carolyn, read the bottom of the page for the description of my computer.
MacPro as in fire breathing, 4 HD drives, taco warming behemoth.
I don't use AirPort to connect to the network with, I use an Ethernet cable directly to the router which is an AT&T fiber connection w/wireless and hard wire capabilities. This device also feeds 4TV's. The Airport Express is downstairs connected to my entertainment system. And come to think of it, it doesn't work either when the rest of the gyrations are going on with the connection. But the TV's still work.
The Network Utility shows normal activity when things don't work.
Once I get the can't connect msg. on Safari, I continue with the inspection of the network and come up with a final no problems present, working just fine.
I haven't tried my back up drive, 'cause its only a week or so old and might have the same ruckus going.
This is not a major hassle, its just one I haven't seen before.
Thanks for your reply though.
DP

Laptop doesn't wake after sleep mode after Windows 10 update

I usually lower the laptop lid when i want to put it into sleep mode; after the windows 10 update, this stopped working. I tried putting it into sleep mode from the start menue. This causes the screen to become black, but power to remain on ( I can see this from a steady light from the power button whereas sleep would have a flashing power button). The laptop's fan also increases in speed. When I try to wake the laptop, nothing happenes; I have tried to use ctrl+alt+delete, however this also does not work. I am ususally forced to resort to a manual shut down via holding the power button for a few second and restarting the laptop. I have tried updating the display adapters, restarted the laptop, and still no result. Does anyone know why this is happenning and how I can fix it?

I was having the Exact Same Issue. The reason I decided to go back to windows 8 was because since upgrading to Windows 10, when my computer goes into sleep mode, I cannot wake it up. I have to press and hold the power button to shut it done and restart. Even if I close my laptop, and reopen the lid, it wont start back up and I have to press and hold the power button and shut it down and restart. After trying to restore my HP Envy Laptop from Windows 10 to Windows 8, it got stuck in a Repair PC Loop and I could not even access the desktop, I tried the restore option to an earlier date and that failed and all the repair options also failed. The last option I had was to do a full PC Refresh, and that one worked. It took about an hour but no data was lost, and only a few of my downloaded apps were removed. An html url was left on the desktop that showed a list of all the apps that were removed. So all I did was download those back and now im back up and running Windows 8.

G4 won't start after sleep and power disonnect

Hi,
I recently put my MDD G4 to sleep, then inadvertantly cut the power to the machine. Now it won't start up. I push the start button, it lights up as long as I'm holding it (firmly), but nothing happens. No fan, no screen, nothing. I've tried unplugging. There are no devices connected other than display and keyboard.
I'd be grateful for suggestions!
Thanks,
Larry
Powerbook G4 12-inch 1.5GHz - 1.25GB RAM Mac OS X (10.4.6)
MDD G4 1.25GHz - 1GB RAM Mac OS X (10.3.9)

You could also have a bad PRAM battery. I would check it. When mine went, I had no response from my Mac at all; just a light on my power button; absolutely no boot at all.
Check out things in Texas Mac Mans tutorial on the subject. His tutorial is a little dated (don't believe it even mentions G5's) but the info in it, except SMU not being included, still applies. The PMU reset is discussed in there too.
Cheers!
DALE

Macbook doesn't start after sleep

When my macbook pro goes asleep, after appr 30 minutes it doesn't start up anymore. I have to start up by holding the on/off button for 10 secs . After that my macbook acts very slow. When I close the macbook and start up again, it works oke. Until it falls in sleep.......it starts all over again.
What to do?

Hi Hoekiebest,
If you are having unusual issues waking from sleep on your Mac, you may find the troubleshooting steps outlined in the following article helpful (in particular, resetting SMC/PRAM):
OS X: When your Mac doesn't sleep or wake
http://support.apple.com/kb/TS5357
Regards,
- Brenden

Bluetooth doesn't work after sleep mode wake up

Okay, so my computer goes to sleep while in Windows XP and I wake is up. I have my bluetooth mouse and keyboard hooked up to it and I try to wake them up. My mouse doesn't reconnect. I notice that my computer also says that it's not connected to my wireless network, but the my web browser and messenger still connect fine. I check my bluetooth preferences to find out that nothing is connected and when I try to reconnect it doesn't work. This never used to happen and it just recently started when I reinstalled windows this past week. The only way I could get the devices to reconnect was to reboot and even then when my computer goes back to sleep they still disconnect.
Anyone else have this problem... or better yet, an answer?

How did you actually solve your problem ?
I have this too on a macbook 2.4.
any help appreciated, this is very annoying.
I installed all latest updates to windows/bootcamp. Did not help.

Bluetooth keyboard and magic pad doesn't work after sleep

This only recently developed, once my 2013 iMac goes into sleep mode, when I tap the keyboard to wake it up to put in my security password, the bluetooth keyboard doesn't work. Also, the track pad shows no point, i.e. I have a sign in screen, but can't sign it.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/ts3048
-Griff W.

T400 doesn't hibernate after sleep (battery power)

Similar Messages

Maybe you are looking for