T400 Fingerprint not working Win7 64 Bit

Hi all, I am new to this. I am a owner of the Lenovo T400 (6475). I have installed a finger print palm rest product number 42X4847. However it does not seem to work, I have tried installing the Lenovo FingerPrint soft ware but each time I try to enroll my finger print I get the following message: Error: Cannot communicate with sensor. I have gone into the BIOS (ver 3.24 7UET94WW) > Security > I/O and disabled and enabled the finger print sensor. This was not fruitful, I've also tried to uninstall and install the Fingerprint software. Please help I really would like to get this working but currently pulling my hair out Thank you all in advance Pritesh

Hi,
and welcome.
Open Device Manager.
Do you see FPR related device in "Biometric devices" thread (or something like this one)? Are there anywhere devices with exclamation mark or unknown devices?
If you see the such item what Hardware IDs it has? Double click on the item, Details tab, Properties list, Hardware ID, the values in the field below (the 1st string)
What driver package are you trying to install?
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

Similar Messages

  • Satellite L850 - right speaker is not working, Win7/ 32-bit

    Satellite L850 right speaker not working in Win 7/ 32-bit
    Only Headphone speaker stereo OK.
    Thank you for your good advice;
    Kind Regards, Joh

    Check please if Toshiba PC diagnostic tool is preinstalled on your notebook.
    If yes start it and check hardware functionality.
    I presume this tool will ends with the same result. On this virtual way we cannot say for sure right diagnostic but I presume the speaker is either defective or there is some problem with the speaker cable.
    Good advice? Contact nearest Toshiba service provider and ask for help.

  • SQL Developer 1.1 Patch 3 still does not work on 64-bit Windows

    There has been a long-standing problem with SQL Developer 1.1 not working on 64-bit versions of Windows. When sqldeveloper.exe is executed, a very unhelpful error dialog stating "The application failed to initialize properly (0xc00000018). Click on OK to terminate the application" is displayed.
    While there is a workaround that involves running the sqldeveloper.bat file in the \sqldeveloper\bin subdirectory, it is a bit inconvenient and requires the user to discover this workaround. Furthermore, SQL Developer 1.0 did not have this problem, so it is a bit puzzling as to why the problem was introduced with SQL Developer 1.1 and why it is still not fixed with the latest patch.

    I can confirm that we have a fix for this problem. I'm not sure when this fix will be available in SQL Developer.
    The bug was introduced in 1.1 due to optimizations in the way that the native Windows launcher works to better support products like SQL Developer.
    Thanks,
    Brian

  • IPhone 6 pin or fingerprint not working please help me asap

    i phone 6 pin and finger print not working please help

    Howdy Karan sood,
    Welcome to Apple Support Communities.
    It sounds like you’re running into an issue unlocking your iPhone because Touch ID and passcode aren’t being accepted.
    Take a look at the article linked below, it provides troubleshooting suggestions that’ll resolve most Touch ID issues.
    Use Touch ID on iPhone and iPad - Apple Support
    Get help with Touch ID
    Make sure that you're using the latest version of iOS.
    Make sure that your fingers and the Home button are clean and dry.*
    Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning. Make sure that your finger touches the metal ring around the Home button.
    If you're using a case or screen protector, make sure it doesn't cover the Home button or the surrounding ring. If it does, remove the case or screen protector and try again.
    Tap Settings > Touch ID & Passcode and make sure that iPhone Unlock or iTunes & App Store is on. Also make sure that you've enrolled one or more fingerprints.
    Try enrolling a different finger.
    If you can't enroll any of your fingers, take your device to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for help.
    * Moisture, lotions, sweat, oils, cuts, or dry skin might affect fingerprint recognition. Certain activities can also temporarily affect fingerprint recognition, including exercising, showering, swimming, cooking, or other conditions or changes that affect your fingerprint.
    And, this article provides tips that’ll help resolve passcode issues.
    iOS passcodes - Apple Support
    Forget your passcode?
    If you or someone else enters the wrong passcode too many times, your device will disable itself temporarily. Get help if you forgot your passcode or your device is disabled.
    Learn what to do if you forgot your Restrictions passcode.
    I hope this helps,
    -Jason

  • Brightness OSD not working in 64 bit Windows 7

    Hi,
    After having used the laptop for a long time with a 32 bit Windows 7, I've upgraded the RAM and added an SSD, and reinstalled with a 64 bit Windows 7. Everything works great, some things even better than before (used to have occasional problems hibernating, but not anymore). However, there is one small, irritating problem:
    The brightness OSD is not working, even though the buttons do control the brightness and every other OSD is working properly, only this one isn't.
    After installing windows, I've used the ThinkVantage System Update utility to install everything. Then I tried installing all kinds of drivers seperately. So far, no luck.
    I'd really appreciate some help resolving this issue.
    Thanks a lot

    I've tried several different versions of the On Screen Display from the Hotkey Features Integration for Windows 7, including 6.60.03, 6.60.01, 6.60.03, 6.42.00, 6.24.00. And every time, it's the same thing. Everyhting works but the brightness control OSD.
    What else can I try?

  • Magic Mouse not working in 32 bit mode?

    Hello,
    I decided to boot my 64-bit 8 core Mac pro in 32 bit and the mouse (bluetooth apple magic mouse) was not working... The keyboard did work however.
    Im not necessarily looking for a remedy to this problem as I don't really plan on using my system in 32 bit mode on a regular basis..... I was just wondering why it might be doing this..
    Anyone have an idea?

    Never mind... this is the MAC Pro section!
    I must be really out of it this morning.... :/
    Message was edited by: MACATTACK2010

  • Bonjour not working in 64-bit OS's (Windows)

    I am writing an app that finds all the printers on a network so I can install the correct printer. I can do this fine in any Windows 32-bit OS (XP-Windows 7rc). However, when I try in any 64-bit OS it does not work. My call to DNSServiceBrowse() returns BadParam. I do the generic call:
    err = DNSServiceBrowse( &client,
    0,
    0,
    "printer.tcp.",
    NULL,
    browseReply,
    NULL );
    client is declared as:
    static DNSServiceRef client = NULL;
    If I compile the mDNSResponder.exe provided by developer.apple.com it works fine. Also, dns-sd.exe allows me to browse for the printers on the network. So what is wrong with my call? Why does it work in 32-bit and nto 64? Do you have to define client differently in 64-bit?
    Thanks for the help.
    (NOTE: I DO have the 64-bit version of Bonjour installed on the OS).
    Message was edited by: RJBez

    64 bit bonjour works on my Vista x64 without a problem. I had to make sure Bonjour services were started in services manager. I had to set Bonjour to Automatic load and start.

  • Exe developed in 32 bit Windows XP not working in 64 bit Windows Vista

    Am using LabVIEW 8.6 demo version downloaded from internet and Windows XP 32 bit OS. I developed an application and created an exe which communicates with a USB smart card reader. That exe file works fine with that USB device in Windows XP 32 bit OS.
    But, when i used that application exe in Windows XP 64 bit OS, and also in Windows Vista 64 bit OS, the application is not working. The communication with the USB smart card reader is not at all establishing. The USB device will take appropriate 32 bit driver and 64 bit driver automatically when updating on various OSes.
    How to resolve this? Shall i have to install any 64 bit drivers for LabVIEW?
    Thanks,
    Mathan
    Solved!
    Go to Solution.

    Dear Amit,
    Thanks for the attention. I have tried both the option you told, "Run as administrator" and checked "Services" and smart card services are running. Even i tried restarting the device, but the same result. Maybe as you told, this maybe more of an MSDN issue. I don't know how to proceed.
    Thanks,
    Mathan
    [Edit: From somewhere in MSDN forum or others, i tried the below suggestion too, but in vain. Same scenario. I lost myself in VISTA.]
    1. Right-click on the key HKLM\SOFTWARE\Microsoft\Cryptography\Calais and select Permissions...
    2. Click Add.
    3. Click Advanced.
    4. Click Locations.
    5. Click on the computername and click OK.
    6. In the window 'Select user or groups', click on Find now.
    7. Select LOCAL SERVICE.
    8. Click OK.
    9. In the window 'Select user or groups', click on OK.
    10. In the window 'Permissions for Calais', click on LOCAL SERVICE and make sure 'Full control' , 'Read' and 'special permissions' is allowed.
    11. In the window 'Advance Security Settings for Calais", deactivate the options 'Inherit from parent the permission entries that apply to child objects...'
    12. When the window 'Security' appears, click Copy.
    13. In the window 'Advance Security Settings for Calais", activate the option 'Replace permission entries on all child objects with entries shown here that apply to child objects' and click OK.
    14. In the window 'Security' click Yes
    15. In the window 'Permissions for Calais', click OK.
    Message Edited by mathan on 01-28-2009 10:15 PM

  • NWDS not working in 64 bit windows vista os

    Hello ,
    This question seems to be basic, How am i suppose to find out the NWDS installed on my system whether its a 32-bit or 64-bit I was initially working in NWDS on windows 32 bit OS , Now i have installed the NWDS into the other windows which is 64 bit , its not working properly , 
    Can you tell us the reason for the same .
    Thanks
    Ronniee

    Hi Ronniee,
    As you know, NWDS is based on Eclipse, and Eclipse is based on SWT - and SWT is delivered for the native interfaces. There are 32 and 64 bit versions. Maybe there are even other native depencies, but the standard problem you are running into with NWDS on 64bit windows is the SWT incompatibility.
    Eclipse itself is also built for 64bit Win systems, see http://www.eclipse.org/downloads/download.php?file=/eclipse/downloads/drops/R-3.5.1-200909170800/eclipse-SDK-3.5.1-win32-x86_64.zip
    SAP only delivers the 32bit version of it's dev environment.
    You can try to use a 32bit JDK (who wants to...) on 64bit win. You can try to use the official 64bit Eclipse version and exchange the things SAP has exchanged. You can try to use the NWDS delivery and exchange the SWT libs. ... And so on...
    I don't know of anybody who has set up a clean NWDS based on 64bit JDK on 64bit Windows, but I also don't know of anybody who really digged into this. I would, as soon as I am running on 64bit win, but that still will need some months, not before April, maybe September 2010...
    So, maybe you get in touch with SAP and ask when they plan to deliver an NWDS for 64bit win... Would be great, maybe then later next year I wouldn't have to struggle with this on my own...
    Hope it helps
    Detlev

  • Photoshop CS6 64 bit not working on 64 bit Window 8 computer

    I am running on Window 8 (64 bit) but Photoshop CS6 extended 64 bit does not work.  Simply cannot open or create files and goes dead and I have to use task manager to stop it from running.  No problem with Illustrator 64 bit nor with Photoshop 32 bit.  I tried reinstall but still same problem.

    Try deleting the 64 bit prefs and see if that makes a difference. Start by closing the program and go to:
    C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)
    Hold down the three keys Ctrl+Alt+Shift (not Ctrl+Alt+Delete) and right-click on the Photoshop Application and choose open - see image - and release the three keys when you see the settings dialog. Click the Yes button and wait for CS6 to launch.

  • Lightroom 4.1 flash web gallery does not work in 32 bit Internet Explorer 9.0

    I have a web site with a Web Gallery I created in Lightroom 4.1. . The Web Gallery will not work in the IE 9.0 32 bit browser. It does work in the IE 9.0 64 bit browser. Also, all other flash material seems to work fine in my 32 bit browser such as Youtube and other flash sites material. I have a flash menu created from another product on my web site which also works fine in the 32 bit IE browser but I cannot get the Lightroom Flash Gallery to work in this browser.
    Any suggestions?

    I am not sure to know where I can do this ...
    is it this ?: I selected all images
    unfortunatly result is the same ...

  • Flash not working in 64 bit environment on 4b9

    After testing on Adobe's website and others, flash is definetly not working on 4b9 64 bit, but it does on 32 bit environment. It's also perfectly working with safari.

    Adobe Flash "Square" is a 64-bit beta version of Adobe Flash.
    [http://labs.adobe.com/downloads/flashplayer10_square.html]
    It brought flash back to Firefox 4b10 on my 64-bit macbook with Mac OS 10.6.

  • T400 Backlight Not Working

    I got a Lenovo T400 and the backlight stopped working (LED). Anyone have any ideas?

    I am having a weird problem where every 1/8 or so LEDs is not working - it looks like a bad solder joint deal.  At the bottom of my screen I get a row of dark shadows that are evenly spaced apart.  I took this to a shop to fix a year ago, but now it's back.  If i pinch the lower right hand corner of the screen, the shadows will temporarily go away.  
    My computer is out of warrenty, should I just go ahead and open it up with a solder gun?
    Also, the pics you have of the screen would be great, so I can see what I'm looking for.  

  • Magic Mouse not working in 64-bit mode

    I just booted up in 64-bit on my new iMac i7, and it seems the magic mouse will not work. I tried to turn it off and on with no luck. Am I missing something??
    Thanks.

    got it working. I had to re-connect it in the BT pane.
    Message was edited by: gr8fl4295

  • FN key/flashcards/toucpad not working - Win7/Vista

    Hello,
    I have installed both Win7 and Vista in an attempt to make my touchpad work. At this point I have installed and reinstalled all the touchpad / VAP drivers on both operating systems. I don't seem to get any results. There's one 0.5 second moment where my touchpad works: when I change the mouse sensitivity in the touchpad driver and click on OK during the time that it takes for the driver to apply the change the touchpad works, but that's like 0,5 seconds - it proves that the touchpad is fine from a hardware perspective. (I think ?)
    One thing though: when I press Fn+F10 or Fn+F11 it actually changes the keyboard layout, so that's one scenario where Fn key works for me.
    Although pressing Fn doesn't bring up with the flashcards.
    Anything you could advice?
    Thanks.

    On a clean (custom) install of win7 32 on Satellite Pro A200GE-26Q, I used the tool from the USA webiste: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/navShell.jsp?cf=Windows7
    [nb separate toshiba-driver & other software installer programs depending on whether you are doing a clean install or upgrading from Vista.]
    It detected that I have a Satellite Pro A200 and installed bluetooth, card reader, chipset, turbo memory, and toshiba value added pack. Windows itself had a driver for the ATI Mobility HD 2600. After all of that, the fn key hotkeys were still not working, and the vista version of the Flash Card support utility would just crash. Still no drivers posted on the downloads site for my model, but this version (posted for NB200 model) worked fine (in fact, much better performance than the old version under Vista): http://support1.toshiba-tro.de/tedd-files2/0/fcsu-20090930160445.ZIP
    Also, ALPs touchpad worked with the generic windows driver, but without scrolling support. This version seems to be working so far: http://support1.toshiba-tro.de/tedd-files2/0/tpdrv-20091015152335.zip published for Satellite A350, Satellite Pro L550D, Satellite L550D, Satellite L555D, Satellite Pro L500D, Satellite L500D
    Of course, try any of this at your own risk! But unless/until Toshiba is clearer about whether we can expect anything more for models more than 18 months old, looks like this is the best on offer...

Maybe you are looking for