T400 Series - Intel Graphics Schemes

I have several T400 and $10 laptops. The newest intel graphics driver does nto appear to have a scheme function in it. Am I just missing it ordid they actualyl remove this functionality?

what do you mean you have several T400 and %10 laptops?
T400
Intel® Core™2 Duo T9400 2.53 GHz__Windows 7 Professional__3GB Memory__160GB, 7200RPM Hard Drive__14.1” WXGA+TFT-CFL__ATI Mobility Radeon™ HD 3470--

Similar Messages

  • How to enable only intel graphics/d​iscrete graphics on T400(WxgA+​), windows xp,

    I got a T400  with switchabale graphics (something i dont understand). I want my 9 cells to  provide as long a run as feasible
    without recharging. Which mode of graphics should i set it to and how do i do it?.
    My blackbox (a bit heavy for me for carrying ) is a t400 with 9 cells and a wxga+, 2gb,120GB.

    Edited: Sorry, missed the first time that you were on XP. The answer below is for Vista only. For XP because of op sys limitations you don't have true switchable graphics capability. You can switch between the two graphics cards during BIOS setup only. To switch, reboot turning power off, then power on and on initial screen hold F1 to enter BIOS setup. Choose config and then display, and toggle graphics between integer (energy saving) and discrete (high performance). First time you switch you may have to reboot an extra time to allow the drivers to install.
    If you have the latest release of the power manager (2.42) right click on it (the battery icon) and choose switchable graphics. If you are still on 2.37 or earlier release of the power manager left click instead. Once you have found the switchable graphics option switch between the two graphics cards by choosing energy saving and high performance GRAPHICS. (NOT similar options in the normal part of the power manager.)
    Here is the Lenovo switchable graphics FAQ
    Message Edited by zilla on 01-25-2009 01:06 PM
    T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

  • I dont have the Intel Graphics media 3600 series driver, I only have 2600, how do i find the update?

    I finally have the Windows 10 icon, but theres one little annoying catch, it says I dont have the Intel Graphics Media Accelorater 3600 series. I have Intel 2600 on my acer Aspire one netbook. It says my display won't work. I tired downloading the driver from Intel website but it says this: The driver being installed is not being validated for this computer, please obtain the appropriate driver from the manufacturer. Does anyone have a link and driver that works? I'm here on the Acer's website, and I'm not finding what I need. How can something so small become such a big hassel? Computers work great when they work,but when you try to reserve Window 10, its becoming a pain in my ars.Sincerely, Dawn

    Intel drivers can't install until you uninstall Acer's Intel VGA drivers. To check drivers support:http://us.acer.com/ac/en/US/content/support keep in mind that only this models will have Acer driver support for windows 10:http://us.acer.com/ac/en/US/content/windows10-eligible-models

  • T400 - Integrated Intel Chipset - OpenGL support

    We've had some new T400's delivered with just the integrated intel graphics.
    Trying to install a Video client (Tandberg MOVI), I get an error that the system only supports OpenGL 1.1, whereas the client needs 1.2.  I've updated to the latest drivers - but still get the same error.
    I've contacted Intel who told me to contact Lenovo - so thought I'd post on here.
    I am running Windows 7 x64, any new drivers that anyone's aware of?  or a way to force the system to think it supports 1.2?
    Thanks.

    The Intel site states:
    The integrated graphics controller of the Intel® G45/G43/G41/Q43/Q45 Express Chipsets and Mobile Intel® 4 Series Express Chipset Family supports hardware acceleration for OpenGL* applications in 16-bit and 32-bit color depths. The latest Intel® Graphics Media Accelerator drivers provide support for the OpenGL version 2.0.
    However when I run my program, it states the system only supports 1.1 - I have updated to the latest drivers.

  • Linux 3.11 breaks triple monitor support on intel graphics

    I just ran pacman -Syu, observed linux (3.10.10-1 -> 3.11.1-1), and found that I can no longer use more than 2 monitors simultaneously. When I try to configure 3 or 4 monitors with xrandr or arandr, I get an error message like "xrandr: configure crtc 2 failed".
    When I boot with linux-lts 3.10.12, it works reliably again.
    I have Intel HD Graphics 4000 on a i5-3320M CPU for a Thinkpad T530 with a ThinkPad Mini Dock Series 3.
    I have 4 monitors: internal laptop screen, DVI, DisplayPort, and a USB DisplayLink. With linux 3.10, all 4 can work simultaneously. With linux 3.11, any 2 of them can work simultaneously.
    In my journalctl at boot time, I see
    kernel: fbcon: inteldrmfb (fb1) is primary device
    kernel: fbcon: Remapping primary device, fb1, to tty 1-63
    kernel: e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
    kernel: IPv6: ADDRCONF(NETDEV_UP): ethernet0: link is not ready
    kernel: iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
    kernel: iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
    kernel: psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 920262
    kernel: psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
    kernel: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input18
    kernel: iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
    kernel: iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
    kernel: IPv6: ADDRCONF(NETDEV_UP): wifi0: link is not ready
    kernel: con2fb_init_display: detected unhandled fb_set_par error, error code -22
    kernel: [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp on
    kernel: wifi0: authenticate with .........
    kernel: .ready
    kernel: sd 7:0:0:0: [sdd] .........
    kernel: released /dev/fb0 user=0 count=0
    kernel: con2fb_release_oldinfo: detected unhandled fb_set_par error, error code -22
    kernel: i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
    Yesterday when I was running linux 3.10, I saw this in my journalctl at boot time with no errors:
    kernel: fbcon: inteldrmfb (fb1) is primary device
    kernel: fbcon: Remapping primary device, fb1, to tty 1-63
    kernel: e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
    kernel: e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
    kernel: IPv6: ADDRCONF(NETDEV_UP): ethernet0: link is not ready
    kernel: iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
    kernel: iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
    kernel: psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 920262
    kernel: psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
    kernel: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input18
    kernel: iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
    kernel: iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
    kernel: IPv6: ADDRCONF(NETDEV_UP): wifi0: link is not ready
    kernel: wifi0: authenticate with .............
    kernel: released /dev/fb0 user=0 count=0
    kernel: i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
    My symptoms seem similar to Unable to configure 3 display multihead / X fails to start with 3 displays connected, although that was reported on linux 3.4.

    Googling around, I found a few more people with what looks like the same problem commenting at the bottom of wrpll sharing not implemented (3x HDMI/DVI screens).
    I have Intel graphics card and it supports triple head setup very well. ... I updated kernel to 3.11.1 after it appeared in Archlinux's repo and one of screens stopped working. I tried to fix it with xrandr but I got only "xrandr: Configure crtc failed" errors and these in Xorg.0.log:
    I have a similar setup and am experiencing the same thing. Downgrading to 3.10 fixed the issue. I'm also happy to help fix this.
    But apparently it's not the correct bug since someone said "if triple display worked and regressed in recent kernels then you have a different bug."
    I think I should report this somewhere, but I'm not sure I understand exactly where (linux or xorg or arch?)

  • T520 with Optimus - Can't install Intel Graphics Driver in XP

    Hello,
    I have T520 with Optimus FHD screen.
    I have XP installed in my Ultrabay HDD.
    I understand that XP doesn't support Optimus and that I must go to BIOS and choose either Discrete or Integrated.
    OPTION 1 (Discrete Only)  Which someone what works:
    - So, when I have Discrete enabled in BIOS - and installed Nvidia Drivers in XP - everything works fine, expcept on 90% initial boot ups after going from Win 7 to XP (F12 Options) -  I assume the NVIDIA driver doesn't get initially recognised and the XP boots up in non native resolution.
    - It's only after I restart again and use (F12 again) to pick Ultrabay with XP, the Nvidia gets properly loaded. But this time, there is a prolong delay (60 to 90 seconds) of black screen after the WIndows XP Welcome screen before the desktop appears.
    OPTION 2 (Intgrated Display Only) - Of couse, this after uninstalling NVIDIA Graphic Driver in XP
    - In BIOS, Integrated Graphic in choosen.
    - XP boots up in basic resolution.
    - I download (From Lenovo T520 Driver Page) - Intel Integrated Driver for Win XP 32.
    - When I try to install it, it says "The computer doesn't meet the minimum requirements for installing the software"
    - BTW, I do have all the WIndows Updates including NET 3.0 and higher
    - So then, I try to forcibly installed through Device Manager and Having DISK  - but I get Error message.
    - But somehow, it works after.
    One guess I have and that confuses me is the Otimus Graphic Card - where maybe it can only work with either Optimus Drivers in Windows 7 or Nvidia Drivers in Windows XP. And that the Integrated Intel HD Graphic Drivers in for XP on Lenovo website are only meant for T520 with Intel Graphics ??!!
    Or can optimus be used with intergrated intel drivers only in the XP?
    If anyone can shed a small light, I would be grateful.
    Thanks You
    Solved!
    Go to Solution.

    Glad to know everything is working for you.
    You shouldn't need the discrete to watch flash videos, the Intel integrated should be able to handle that on its own.
    The nVidia card shouldn't be running at all when the machine is in integrated . In fact it doesn't even run in Optimus except when it is actively being used. nVidia proved this when it was first demoing the technology. nVidia removed the nVidia chip from the motherboard of an active system that was running in Optimus using only the integrated graphics, and the computer kept running without issue and the power consumption was the same with and without the chip on the board.
    If you really wanted FireFox to always run with the nVidia card (again, I don't know why you would want this) you can change the settings in the nVidia control panel to force FireFox to run with discrete.
    When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
    My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

  • T400 - only integrated graphics?

    There seems to be only integrated graphics for the T400 (Intel Graphics Media Accelerator 4500MHD with vPro)... Can a dedicated graphics card be added to it?

    Do you mean the T400 literally, or some other machine?  Do you already have the T400, or are you shopping?
    My T400 has both integrated and discrete graphics - "switchable".
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • GT60 2PC 3K keeps using intel graphics instead of nvidia?

    Hiya, having incredibly frustrating issues with my GT60 here.
    Out of the box, this thing works relatively OK, except the version of Win 8 that's installed on it has some memory leak issues when running fullscreen applications. No big deal, run windows update and that turned out be sorted. However, now its got the awful Intel onboard graphics as the main graphics processor. Majority of games won't start because it won't support direct X and other shenanigans like that. Disabling the intel graphics in device manager had some small effect, I actually got my games to start but as soon as they try to render anything more than a loading screen, i get "out of video memory" errors, so it's like it's still refusing to use the nvidia card. This was all working fine before I did any windows updates except for the random memory leaks that would suddenly lag the crap out of games for a while. Anyone had any issues like this with a GT60 3K or similar series? Any suggestions would be greatly appreciated!

    Hello gorgoncola
    Have you tried to recover the system and try the same scenario?
    Is your game running okay on a clean-recovered system? Or it actually didn't run on NVIDIA graphics card?
    Not all applications are detected by NVIDIA graphics driver and sometimes you'll need to manually add them to the detecting list (in the NVIDIA Control Panel) to automatically switch to NVIDIA graphics card to run them. 

  • How to save customized skin (via Intel graphics) from session to session

    Hi-I'm a novice so hopefully there's an easy resolution. I've customized the Firefox theme using Intel HD graphics "color enhancement." Even though the coloring setting are saved via the Intel card, when I start a new Firefox session the theme reverts to the original shadings. I can change back to my customized theme by opening the Intel Control Center but I'd like to avoid that step.
    Is there a way to keep my settings as default without fiddling with css editing which I'm too stupid to do? Thanks for any thoughts

    Thanks for responding! It's a trivial issue but with OCD I can spend hour after hour trying to get things as I want them.
    I found Flaminglow as a theme that was a bit unique. But I wanted the saturation, contrast, etc. altered, which I did with Intel graphics program that was pre-installed. I can save the color enhancement i.e. "a" scheme, "b", etc. with Intel. But when I restart the pc it reverts to the default colors of Flaminglow and I have to go to the Intel program and enter the saved scheme. I don't want to have to do that each time I turn the PC on. I've included a screenshot of the homepage and one of the Intel control center.
    I thought that perhaps a session saving add on may work but just don't know. Make any sense, lol? Thanks

  • Windows 10 Compatibility Issue - Intel Graphics Media Accelerator

    Hi. I have been trying to update my pc to windows 10 as I'm sure many people are right now. However, after registering for my copy of it and being told everything is fine and my pc will run windows 10, it now appears I cannot. I receive a message saying: "The display manufacturer hasn't made your display compatible with Windows 10. Check with the manufacturer for support." As stated above the graphics driver is Intel Graphics Media Accelerator. Unfortunately I have been unable to find which series though. However, my issue is I cannot find any update for the graphic driver which makes my pc compatible with windows 10. I'm asking whether anyone knows anything about an update either available now, or any info such as a release date. I really hope nobody has to say this, but I'd even be grateful for someone to tell me my pc would never be compatible. Thanks in advance.

    I have used the manual way of downloading W10 using the regedit etc. I then cancelled the installation due to fears my pc may crash or get stuck between W8.1 and 10 and be unable to get back to 8.1. Would continuing the installation be dangerous or is it safe to try? I was desperately looking forward to W10 and I'm now so disappointed I can't right now.

  • Windows 10 Compatibility - Intel Graphics Media Accelerator

    Hi. I have been trying to update my pc to windows 10 as I'm sure many people are right now. However, after registering for my copy of it and being told everything is fine and my pc will run windows 10, it now appears I cannot. I receive a message saying: "The display manufacturer hasn't made your display compatible with Windows 10. Check with the manufacturer for support." As stated above the graphics driver is Intel Graphics Media Accelerator. Unfortunately I have been unable to find which series though. However, my issue is I cannot find any update for the graphic driver which makes my pc compatible with windows 10. I'm asking whether anyone knows anything about an update either available now, or any info such as a release date. I really hope nobody has to say this, but I'd even be grateful for someone to tell me my pc would never be compatible. Thanks in advance.

    I have used the manual way of downloading W10 using the regedit etc. I then cancelled the installation due to fears my pc may crash or get stuck between W8.1 and 10 and be unable to get back to 8.1. Would continuing the installation be dangerous or is it safe to try? I was desperately looking forward to W10 and I'm now so disappointed I can't right now.

  • How can I disable intel graphics? G570

    Hi!
    I have a question like in the topic. I have a Lenovo G570 laptop with Intel HD integrated Graphics and AMD HD 6300M dedicated Graphics. I'm running on Win7.
    I know that a similar topic was before and that the Intel graphic should switch to amd when necessary but I think it's not working right. The problem is with Skyrim. When I run the game's setup it automatically detects the configuration I possess and chooses the graphic options in the game. As You can imagine they are the lowest possible as it ONLY detects my intel graphic. The AMD adapter is not there (the list which appears to choose from does contain the intel only).
    So, is there ANY way to just turn off the intel adapter and work on amd all the time? It would help a lot. I tried that in device manager but when I disable the intel graphics the screen resolution drops rapidly and aero theme from windows is being disabled. It sucks. As if I was forced to use the intel.
    Can anyone help? I would sure appreciate that a lot.
    Thanks!

    Hi Lenssd9,
    If you could tell us what machine type you're using and the operating system we might be able to pinpoint a means of assisting you without too much reconfiguring.
    Be AWESOME Everyday!
    Donate KUDOS and Click "Accepted Solution"
    Did someone help you today?
    Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"
    This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

  • I can't install Intel graphics driver for HP Pavilion G6 2240SH under Windows 8.1

    HI!
    I installed Windows 8.1 Update 1 x64 to my HP Pavilion G6 2240SH laptop. I started install the drivers and I got an error message in the Intel High-Definition setup: "This computer does not meet the minimum requirements for installing the software."
    Intel HD driver version: 10.18.10.3277
    Can anybody help me to solve this problem?
    Thanks,
    Spatrik
    This question was solved.
    View Solution.

    Hello Spatrik, 
    I have read your post on how your notebook computer is displaying an error message that your updated driver does not meet your system requirements, and I would be happy to assist you!
    The first step I recommend is to remove the Intel graphics driver, as well as removing the chipset drivers from Programs and Features. These chipset drivers will be named Intel Chipset Installation Utility and Driver, and Intel Management Engine Interface (MEI) Driver. Once the drivers are removed, please restart your computer.
    When the computer powers back on, please download and install the following drivers:
    Intel Chipset Installation Utility and Driver
    Intel Management Engine Interface (MEI) Driver
    Intel High-Definition (HD) Graphics Driver 
    Once these drivers are re-installed, please follow this document on Using HP Support Assistant (Windows 8). This should help in updating your computer's Intel drivers.   
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • KDE4 compositing no longer works with Intel graphics card

    I recently upgraded to the new intel graphics card drivers and when I started KDE4, I got a black screen. I disabled compositing through the kwinrc file, but I want it back! Here's my xorg.conf
    Section "ServerLayout"
            Identifier     "Xorg Configured"
            Screen      0  "Screen0" 0 0
            InputDevice    "Keyboard0" "CoreKeyboard"
    EndSection
    Section "ServerFlags"
            Option "AllowMouseOpenFail"  "true"
            Option "AIGLX" "true"
    EndSection
    Section "Module"
            Load  "ddc"  # ddc probing of monitor
            Load  "dbe"
            Load  "dri"
            Load  "extmod"
            Load  "glx"
            Load  "bitmap" # bitmap-fonts
            Load  "freetype"
            Load  "record"
    #       Load  "synaptics"
    EndSection
    Section "InputDevice"
            Identifier  "Keyboard0"
            Driver      "keyboard"
            Option      "CoreKeyboard"
            Option "XkbRules" "xorg"
            Option "XkbModel" "pc105"
            Option "XkbLayout" "gb"
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Monitor"
            Identifier "Monitor0"
            Option "DPMS" "true"
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Device"
            Identifier  "Card0"
            Driver      "intel"
    #       Driver      "vesa"
            VendorName  "All"
            BoardName   "All"
            Option      "XAANoOffscreenPixmaps" "true"
            Option      "DRI" "true"
    EndSection
    Section "Screen"
            Identifier "Screen0"
            Device     "Card0"
            Monitor    "Monitor0"
            DefaultColorDepth 24
            SubSection "Display"
                    Depth     24
                    Modes "1280x800" "1024x768" "800x600" "640x480"
            EndSubSection
    EndSection
    Section "DRI"
            Mode 0666
    EndSection
    Section "Extensions"
            Option "Composite" "Enable"
    EndSection
    and my Xorg.0.log
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.4.0.90
    Release Date: 5 September 2007
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.24-ARCH x86_64
    Current Operating System: Linux michael-laptop 2.6.24-ARCH #1 SMP PREEMPT Sun Feb 10 15:44:59 CET 2008 x86_64
    Build Date: 26 January 2008 09:52:13AM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 12 11:23:12 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Xorg Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Keyboard0"
    (**) Option "AllowMouseOpenFail" "true"
    (**) Option "AIGLX" "true"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) No FontPath specified. Using compiled-in default.
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (==) RgbPath set to "/usr/share/X11/rgb"
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is enabled
    (==) |-->Input Device "<default pointer>"
    (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x7b0560
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 2.0
    X.Org XInput driver : 2.0
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (++) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 8086,2a00 card 14c0,0026 rev 0c class 06,00,00 hdr 00
    (II) PCI: 00:02:0: chip 8086,2a02 card 14c0,0026 rev 0c class 03,00,00 hdr 80
    (II) PCI: 00:02:1: chip 8086,2a03 card 14c0,0026 rev 0c class 03,80,00 hdr 80
    (II) PCI: 00:1a:0: chip 8086,2834 card 14c0,0026 rev 03 class 0c,03,00 hdr 80
    (II) PCI: 00:1a:1: chip 8086,2835 card 14c0,0026 rev 03 class 0c,03,00 hdr 00
    (II) PCI: 00:1a:7: chip 8086,283a card 14c0,0026 rev 03 class 0c,03,20 hdr 00
    (II) PCI: 00:1b:0: chip 8086,284b card 14c0,0026 rev 03 class 04,03,00 hdr 00
    (II) PCI: 00:1c:0: chip 8086,283f card 0000,0000 rev 03 class 06,04,00 hdr 81
    (II) PCI: 00:1c:1: chip 8086,2841 card 0000,0000 rev 03 class 06,04,00 hdr 81
    (II) PCI: 00:1c:2: chip 8086,2843 card 0000,0000 rev 03 class 06,04,00 hdr 81
    (II) PCI: 00:1c:3: chip 8086,2845 card 0000,0000 rev 03 class 06,04,00 hdr 81
    (II) PCI: 00:1c:4: chip 8086,2847 card 0000,0000 rev 03 class 06,04,00 hdr 81
    (II) PCI: 00:1c:5: chip 8086,2849 card 0000,0000 rev 03 class 06,04,00 hdr 81
    (II) PCI: 00:1d:0: chip 8086,2830 card 14c0,0026 rev 03 class 0c,03,00 hdr 80
    (II) PCI: 00:1d:1: chip 8086,2831 card 14c0,0026 rev 03 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:2: chip 8086,2832 card 14c0,0026 rev 03 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:7: chip 8086,2836 card 14c0,0026 rev 03 class 0c,03,20 hdr 00
    (II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev f3 class 06,04,01 hdr 01
    (II) PCI: 00:1f:0: chip 8086,2815 card 0000,0000 rev 03 class 06,01,00 hdr 80
    (II) PCI: 00:1f:1: chip 8086,2850 card 14c0,0026 rev 03 class 01,01,8a hdr 00
    (II) PCI: 00:1f:2: chip 8086,2829 card 14c0,0026 rev 03 class 01,06,01 hdr 00
    (II) PCI: 00:1f:3: chip 8086,283e card 14c0,0026 rev 03 class 0c,05,00 hdr 00
    (II) PCI: 04:00:0: chip 14e4,1713 card 14c0,0026 rev 02 class 02,00,00 hdr 00
    (II) PCI: 0c:00:0: chip 8086,4229 card 8086,1101 rev 61 class 02,80,00 hdr 00
    (II) PCI: 0e:06:0: chip 1180,0832 card 14c0,0026 rev 05 class 0c,00,10 hdr 80
    (II) PCI: 0e:06:1: chip 1180,0822 card 14c0,0026 rev 22 class 08,05,00 hdr 80
    (II) PCI: 0e:06:2: chip 1180,0592 card 14c0,0026 rev 12 class 08,80,00 hdr 80
    (II) PCI: End of PCI scan
    (II) Intel Bridge workaround enabled
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,14), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 2 I/O range:
    [0] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
    [1] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
    [2] -1 0 0x00002800 - 0x000028ff (0x100) IX[b]
    [3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[b]
    (II) Bus 2 non-prefetchable memory range:
    [0] -1 0 0xc0000000 - 0xc3ffffff (0x4000000) MX[b]
    (II) Bus 2 prefetchable memory range:
    [0] -1 0 0xcc000000 - 0xcdffffff (0x2000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 4: bridge is at (0:28:1), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 4 I/O range:
    [0] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
    [1] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
    [2] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
    [3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
    (II) Bus 4 non-prefetchable memory range:
    [0] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[b]
    (II) Bus 4 prefetchable memory range:
    [0] -1 0 0xfa000000 - 0xfbffffff (0x2000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 6: bridge is at (0:28:2), (0,6,6), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 6 I/O range:
    [0] -1 0 0x00004000 - 0x000040ff (0x100) IX[b]
    [1] -1 0 0x00004400 - 0x000044ff (0x100) IX[b]
    [2] -1 0 0x00004800 - 0x000048ff (0x100) IX[b]
    [3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[b]
    (II) Bus 6 non-prefetchable memory range:
    [0] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[b]
    (II) Bus 6 prefetchable memory range:
    [0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 8: bridge is at (0:28:3), (0,8,8), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 8 I/O range:
    [0] -1 0 0x00005000 - 0x000050ff (0x100) IX[b]
    [1] -1 0 0x00005400 - 0x000054ff (0x100) IX[b]
    [2] -1 0 0x00005800 - 0x000058ff (0x100) IX[b]
    [3] -1 0 0x00005c00 - 0x00005cff (0x100) IX[b]
    (II) Bus 8 non-prefetchable memory range:
    [0] -1 0 0xb8000000 - 0xbbffffff (0x4000000) MX[b]
    (II) Bus 8 prefetchable memory range:
    [0] -1 0 0xc8000000 - 0xc9ffffff (0x2000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 10: bridge is at (0:28:4), (0,10,10), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) PCI-to-PCI bridge:
    (II) Bus 12: bridge is at (0:28:5), (0,12,12), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 12 non-prefetchable memory range:
    [0] -1 0 0xf8200000 - 0xf82fffff (0x100000) MX[b]
    (II) Subtractive PCI-to-PCI bridge:
    (II) Bus 14: bridge is at (0:30:0), (0,14,14), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 14 non-prefetchable memory range:
    [0] -1 0 0xf8300000 - 0xf83fffff (0x100000) MX[b]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (--) PCI:*(0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf8000000/20, 0xd0000000/28, I/O @ 0x1800/3
    (--) PCI: (0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf8100000/20
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) Active PCI resource ranges:
    [0] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
    [1] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
    [2] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
    [3] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
    [4] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
    [5] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
    [6] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
    [7] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
    [8] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
    [9] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
    [10] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
    [11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [12] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
    [13] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
    [14] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
    [15] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
    [16] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
    [17] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
    [18] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
    [19] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
    [20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [24] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
    [25] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
    [26] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
    [27] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
    [28] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
    [29] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
    [1] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
    [2] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
    [3] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
    [4] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
    [5] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
    [6] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
    [7] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
    [8] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
    [9] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
    [10] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
    [11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [12] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
    [13] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
    [14] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
    [15] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
    [16] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
    [17] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
    [18] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
    [19] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
    [20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [24] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
    [25] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
    [26] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
    [27] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
    [28] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
    [29] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
    [5] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
    [6] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
    [7] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
    [8] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
    [9] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
    [10] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
    [11] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
    [12] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
    [13] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
    [14] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
    [15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [16] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
    [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [19] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
    [20] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
    [21] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
    [22] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
    [23] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
    [24] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
    [25] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
    [26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [28] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [30] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
    [31] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
    [32] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
    [33] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
    [34] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
    [35] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
    (II) "extmod" will be loaded. This was enabled by default and also specifiedin the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified inthe config file.
    (II) "glx" will be loaded. This was enabled by default and also specified inthe config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specifiedin the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified inthe config file.
    (II) LoadModule: "ddc"(II) Module "ddc" already built-in
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (**) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.4.0.90, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension RECORD
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 2.2.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 2.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, 965G, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33
    (II) Primary Device is: PCI 00:02:0
    (--) Assigning device section with no busID to primary device
    (WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
    (--) Chipset 965GM found
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
    [5] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
    [6] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
    [7] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
    [8] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
    [9] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
    [10] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
    [11] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
    [12] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
    [13] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
    [14] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
    [15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [16] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
    [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [19] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
    [20] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
    [21] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
    [22] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
    [23] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
    [24] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
    [25] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
    [26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [28] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [30] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
    [31] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
    [32] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
    [33] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
    [34] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
    [35] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
    (II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
    [5] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
    [6] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
    [7] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
    [8] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
    [9] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
    [10] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
    [11] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
    [12] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
    [13] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
    [14] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
    [15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [16] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
    [17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [22] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
    [23] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
    [24] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
    [25] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
    [26] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
    [27] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
    [28] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
    [29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [31] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [32] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [33] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
    [34] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
    [35] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
    [36] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
    [37] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
    [38] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
    [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.1.0
    ABI class: X.Org Video Driver, version 2.0
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 0.1.0
    ABI class: X.Org Video Driver, version 2.0
    (**) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "DRI" "true"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
    (--) intel(0): Chipset: "965GM"
    (--) intel(0): Linear framebuffer at 0xD0000000
    (--) intel(0): IO registers at addr 0xF8000000
    (II) intel(0): 2 display pipes available.
    (==) intel(0): Using EXA for acceleration
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"(II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"(II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Monitor0
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) intel(0): EDID vendor "CPT", prod id 5141
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (WW) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7616 kB
    (II) intel(0): VESA VBE OEM: Intel(r)Crestline Graphics Chip Accelerated VGABIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r)Crestline Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) intel(0): found backlight control method /sys/class/backlight/acpi_video1
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
    (II) intel(0): No SDVO device found on SDVOB
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
    (II) intel(0): No SDVO device found on SDVOC
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): EDID vendor "CPT", prod id 5141
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Output LVDS using initial mode 1280x800
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 512 kB GTT.
    (II) intel(0): detected 7676 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 2.2.0
    ABI class: X.Org Video Driver, version 2.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xd0000009 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing on
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (II) Loading sub module "dri"
    (II) LoadModule: "dri"
    (II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MS[b]
    [1] 0 0 0xf8000000 - 0xf80fffff (0x100000) MS[b]
    [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [6] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
    [7] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
    [8] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
    [9] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
    [10] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
    [11] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
    [12] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
    [13] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
    [14] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
    [15] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
    [16] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
    [17] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [18] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
    [19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [22] 0 0 0x00001800 - 0x00001807 (0x8) IS[b]
    [23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [24] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [25] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
    [26] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
    [27] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
    [28] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
    [29] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
    [30] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
    [31] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
    [32] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [33] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [34] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [35] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [36] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
    [37] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
    [38] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
    [39] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
    [40] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
    [41] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
    [42] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [43] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 238592 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 954364 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: drmOpenMinor returns 7
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) intel(0): [drm] framebuffer mapped by ddx driver
    (II) intel(0): [drm] added 1 reserved context for kernel
    (II) intel(0): X context handle = 0x1
    (II) intel(0): [drm] installed DRM signal handler
    (==) intel(0): VideoRam: 262144 KB
    (**) intel(0): Framebuffer compression disabled
    (**) intel(0): Tiling enabled
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Success.
    (II) intel(0): [drm] Registers = 0xf8000000
    (II) intel(0): [drm] ring buffer = 0xd0000000
    (II) intel(0): [drm] mapped front buffer at 0xd0100000, handle = 0xd0100000
    (II) intel(0): [drm] mapped back buffer at 0xd1a00000, handle = 0xd1a00000
    (II) intel(0): [drm] mapped depth buffer at 0xd2040000, handle = 0xd2040000
    (II) intel(0): [drm] mapped classic textures at 0xd2680000, handle = 0xd2680000
    (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
    (II) intel(0): [dri] visual configs initialized
    (II) intel(0): Page Flipping disabled
    (==) intel(0): Write-combining range (0xd0000000,0x10000000)
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (II) EXA(0): Offscreen pixmap area of 19660800 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): [DRI] installation complete
    (II) intel(0): [drm] dma control initialized, using IRQ 16
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01a00000 (pgoffset 6656)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x02040000 (pgoffset 8256)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02680000 (pgoffset 9856)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
    (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
    (II) intel(0): 0x00032000-0x00041fff: exa G965 state buffer (64 kB)
    (II) intel(0): 0x00100000-0x0073ffff: front buffer (6400 kB) X tiled
    (II) intel(0): 0x00740000-0x019fffff: exa offscreen (19200 kB)
    (II) intel(0): 0x0077f000: end of stolen memory
    (II) intel(0): 0x01a00000-0x0203ffff: back buffer (6400 kB) X tiled
    (II) intel(0): 0x02040000-0x0267ffff: depth buffer (6400 kB) Y tiled
    (II) intel(0): 0x02680000-0x0467ffff: classic textures (32768 kB)
    (II) intel(0): 0x10000000: end of aperture
    (WW) intel(0): ESR is 0x00000001
    (WW) intel(0): Existing errors found in hardware state.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (**) Option "dpms" "true"
    (**) intel(0): DPMS enabled
    (II) intel(0): Set up textured video
    (II) intel(0): direct rendering: Enabled
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (WW) intel(0): Option "XAANoOffscreenPixmaps" is not used
    (--) RandR disabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension XAccessControlExtension
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: drmOpenMinor returns 8
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (WW) AIGLX: 3D driver claims to not support visual 0x23
    (WW) AIGLX: 3D driver claims to not support visual 0x24
    (WW) AIGLX: 3D driver claims to not support visual 0x25
    (WW) AIGLX: 3D driver claims to not support visual 0x26
    (WW) AIGLX: 3D driver claims to not support visual 0x27
    (WW) AIGLX: 3D driver claims to not support visual 0x28
    (WW) AIGLX: 3D driver claims to not support visual 0x29
    (WW) AIGLX: 3D driver claims to not support visual 0x2a
    (WW) AIGLX: 3D driver claims to not support visual 0x2b
    (WW) AIGLX: 3D driver claims to not support visual 0x2c
    (WW) AIGLX: 3D driver claims to not support visual 0x2d
    (WW) AIGLX: 3D driver claims to not support visual 0x2e
    (WW) AIGLX: 3D driver claims to not support visual 0x2f
    (WW) AIGLX: 3D driver claims to not support visual 0x30
    (WW) AIGLX: 3D driver claims to not support visual 0x31
    (WW) AIGLX: 3D driver claims to not support visual 0x32
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) intel(0): Setting screen physical size to 331 x 207
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "gb"
    (**) Keyboard0: XkbLayout: "gb"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (WW) <default pointer>: No Device specified, looking for one...
    (II) <default pointer>: Setting Device option to "/dev/input/mice"
    (--) <default pointer>: Device: "/dev/input/mice"
    (==) <default pointer>: Protocol: "Auto"
    (**) Option "CorePointer"
    (**) <default pointer>: always reports core events
    (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
    (**) <default pointer>: ZAxisMapping: buttons 4 and 5
    (**) <default pointer>: Buttons: 9
    (**) <default pointer>: Sensitivity: 1
    (II) evaluating device (<default pointer>)
    (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
    (II) evaluating device (Keyboard0)
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
    (II) <default pointer>: ps2EnableDataReporting: succeeded
    (II) intel(0): EDID vendor "CPT", prod id 5141
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1304 1336 1408 800 801804 813 -hsync -vsync (48.9 kHz)
    (II) intel(0): EDID vendor "CPT", prod id 5141
    (II) 3rd Button detected: disabling emulate3Button
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (II) intel(0): xf86UnbindGARTMemory: unbind key 1
    (II) intel(0): xf86UnbindGARTMemory: unbind key 2
    (II) intel(0): xf86UnbindGARTMemory: unbind key 3
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01a00000 (pgoffset 6656)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x02040000 (pgoffset 8256)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02680000 (pgoffset 9856)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
    (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
    (II) intel(0): 0x00032000-0x00041fff: exa G965 state buffer (64 kB)
    (II) intel(0): 0x00100000-0x0073ffff: front buffer (6400 kB) X tiled
    (II) intel(0): 0x00740000-0x019fffff: exa offscreen (19200 kB)
    (II) intel(0): 0x0077f000: end of stolen memory
    (II) intel(0): 0x01a00000-0x0203ffff: back buffer (6400 kB) X tiled
    (II) intel(0): 0x02040000-0x0267ffff: depth buffer (6400 kB) Y tiled
    (II) intel(0): 0x02680000-0x0467ffff: classic textures (32768 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (II) intel(0): [drm] mapped front buffer at 0xd0100000, handle = 0x2fff9000
    (II) intel(0): [drm] dma control initialized, using IRQ 16
    (II) <default pointer>: ps2EnableDataReporting: succeeded
    (II) 3rd Button detected: disabling emulate3Button
    Last edited by miggols99 (2008-02-12 14:50:38)

    Maybe it is this bug: http://bugs.kde.org/show_bug.cgi?id=154969
    The decisive effect is 'Improved window management' - if this effect is enabled kwin works normally.
    Last edited by May-C (2008-02-13 01:16:48)

  • DVD player only shows video under Intel graphics

    I have a Macbook Pro 15", i7 2.66, and just noticed that Apple's DVD Player app will only show video under Intel graphics. When it's switched to the Nvidia 330M, all I get is a black screen (+ audio).
    Oddly, the VLC app works fine, so I'm (sort of) hoping this is a software issue. Anyone else experience this?

    Agreed it is a shame. This is the second time to hear of this glitch. I do not know if it constitutes a bug however.
    If you want to report it to Apple's engineers, send a bug report via its Bug Reporter system. To do this, join the Mac Developer Program—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report. The nice thing with this procedure is that you get a response and a follow-up number thus starting a dialog with engineering.
    Message was edited by: leroydouglas

Maybe you are looking for

  • Internal Error when adding Invoice from DI-API

    Hello All, I am trying to add an invoice using DI-API. I hv populated the object using XML and than adding it. Upon adding the error Internal Error (-10) is coming. I hv checked everything but am certainly missing something. Following is the XML of t

  • Canon LBP5000 does not work after Leopard Upgrade

    Hi all, We have a Canon LBP5000 that is directly connected to one of our iMac's and worked like a charm when we were using Tiger. After upgrading to Leopard, everything went weird. It is still installed but when we tried printing, we get a 'Load Pape

  • Configured 2 vcpu, but domU has only 1 vcpu

    Hi everybody, i have an OVM2.2 System with 2 DomU (OracleLinux 6.1) running. All works fine, but sometimes the DomU freezes and i cant connect them by console or ssh. On Dom0 i see, that DomU-CPU is 100%. I monitored some Xen Parameters by using xm l

  • How do I get rid of "unreadable files" when I am importing from my camera?

    How do I get rid of "unreadable files" when I am importing from my camera?

  • PSE8 crashes when help is selected

    I use PSE 8 for Mac. Lately when I click on Photoshop Elements Help under the help menu the app crashes immediately. A few hundred lines of text show up in the resulting error panel with a message that Apple will be sent the message. Any ideas on how