T400 Volume too high. Volume control broken.

On Windows XP with Conexant Audio Driver 3.64.12.0 the volume control setting inside the SMARTaudio maps setting 10 to 1 or 2 for the windows volume control/OSD(i.e. quite loud), thus the volume set to bar 4-5 is already deafing.
Does anyone know how to fix this?

I've found no solution myself, having messing with all the settings. The static now audible because of this volume boost is just horrible as well!

Similar Messages

ORA-25307: Enqueue rate too high, flow control enabled

I am stuck. I have my stream setup and they were previously working on two of my dev environments well. Now when I get the streams setup the CAPTURE process has a state of "CAPTURING CHANGES" for like 10 seconds and then changes to state "PAUSED FOR FLOW CONTROL". I believe this is happening because the PROPAGATION process is showing an error of "ORA-25307: Enqueue rate too high, flow control enabled".
I don't know what to tweak to get rid of this error message. The two environments are dev databases and there is minimal activity on them so i don't think it's a case of the APPLY process is lagging behind the PROPAGATION process. Has anyone run into this issue?? I've verified my db link works, my stream admin user has dba access. Any help or advise would be greatly appreciated.
thanks, dave

As rule of thumb, you don't need to set GLOBAL_NAME=TRUE as long as your are 100% GLOBAL_NAME compliant.
So, setting GLOBAL_NAME=TRUE will not have any effect if your dblink is not global_name compliant
and if your installation is global_name compliant, you don't need to set GLOBAL_NAME=TRUE.
The first thing when you diagnose is to get the exact facts.
Please run this queries both on source and target so that to see what are in the queues and where.
Run it multiple time to see if figures evolves.
- If they are fixed, then your Streams is stuck in its last stage. As a cheap and good starting point, just stop/start the capture, propagation and target apply process. Check also the alert.log on both site. when you have a propagation problem, they do contains information's. If you have re-bounced everything and no improvement then the real diagnose work must start here but then we know that the message is wrong and the problems is elsewhere.
- if they are not fixed then your apply really lag behind for what ever good reason, but this is usually easy to find.
set termout off
col version new_value version noprint
col queue_table format A26 head 'Queue Table'
col queue_name format A32 head 'Queue Name'
select substr(version,1,instr(version,'.',1)-1) version from v$instance;
col mysql new_value mysql noprint
col primary_instance format 9999 head 'Prim|inst'
col secondary_instance format 9999 head 'Sec|inst'
col owner_instance format 99 head 'Own|inst'
COLUMN MEM_MSG HEADING 'Messages|in Memory' FORMAT 99999999
COLUMN SPILL_MSGS HEADING 'Messages|Spilled' FORMAT 99999999
COLUMN NUM_MSGS HEADING 'Total Messages|in Buffered Queue' FORMAT 99999999
set linesize 150
select case
when &version=9 then ' distinct a.QID, a.owner||''.''||a.name nam, a.queue_table,
              decode(a.queue_type,''NORMAL_QUEUE'',''NORMAL'', ''EXCEPTION_QUEUE'',''EXCEPTION'',a.queue_type) qt,
              trim(a.enqueue_enabled) enq, trim(a.dequeue_enabled) deq, x.bufqm_nmsg msg, b.recipients
              from dba_queues a , sys.v_$bufqm x, dba_queue_tables b
        where
               a.qid = x.bufqm_qid (+) and a.owner not like ''SYS%''
           and a.queue_table = b.queue_table (+)
           and a.name not like ''%_E'' '
   when &version=10 then ' a.owner||''.''|| a.name nam, a.queue_table,
              decode(a.queue_type,''NORMAL_QUEUE'',''NORMAL'', ''EXCEPTION_QUEUE'',''EXCEPTION'',a.queue_type) qt,
              trim(a.enqueue_enabled) enq, trim(a.dequeue_enabled) deq, (NUM_MSGS - SPILL_MSGS) MEM_MSG, spill_msgs, x.num_msgs msg,
              x.INST_ID owner_instance
              from dba_queues a , sys.gv_$buffered_queues x
        where
               a.qid = x.queue_id (+) and a.owner not in ( ''SYS'',''SYSTEM'',''WMSYS'') order by a.owner ,qt desc'
   end mysql
from dual
set termout on
select &mysql
/B. Polarski

Mic recording volume too high

Even with the lowest input volume setting in System Preferences / Sound, the mic recording volume is too high and I'm getting clipping. I'm using an MXL Desktop Recording Kit from Marshall Electronics, with a Griffin iMic USB interface, and recording in GarageBand 3 on a Mac Mini.
I'm a folk singer playing a nylon-string classical guitar, so I'm not even especially loud! The MXL mic captures great sound quality, but it is so sensitive that even when I'm six feet away, my acoustic guitar and vocals frequently max out the sound levels and get clipped. The room where I record doesn't allow me to get much farther away, so I need a different solution.
I've tried using compression while recording, but this doesn't appear to limit the peaks or prevent clipping. Do I need to buy a hardware mixer or some other interface to allow me to further reduce the mic input level, or is there another software contol in GarageBand or someplace else (other than System Preferences / Sound) that I'm missing?
I'd appreciate any suggestions. Thanks, David
Mac Mini G4 Mac OS X (10.4.6) GarageBand 3

Thanks for these suggestions. I suspected GB effects wouldn't change the recording levels, but appreciate the confirmation. I checked the Audio/Midi setup in GB preferences, and I don't see anywhere to adjust the recording level there, just a selection for the audio input (source).
I have been using the iBooster, so I tried plugging the mic directly into the iMic and boosting the input level in System Preferences/Sound. This achieved a much lower input level; so low that the GB tuner couldn't even recognize the pitch of a single string when plucked. So this seems to create the opposite problem (recording volume too low). Good idea to try, though.
I will experiment with the room acoustics and try a larger space, but it still seems the recording level is just too high, period. Any other suggestions?
I saw a reference to a simple mixer in another GB thread (Behringer UB502 Eurorack). Could something like this be a possible solution?
Thanks, David

NOKIA 2310 Radio Volume Too High !

Hi,
I have NOKIA 3210, and the radio volume is too high. The volume is at minimum level.
Note :
When I activate visualisation (in radio menu), the volume is less high( I can support it ). But one minute after, the volume is high like without visualisation.
How can I lower the volume ?
Eric.
France.Message Edited by cafeiine on 29-May-200709:48 PM

I am not sure how you can fix this, but please take the phone to a nokia care center and ask them if it is normal for your phone to behave like that. It could be a hardware malfunction.

Garageband export volume - too high!

Please can someone help me with this because it's driving me insane. I have a copy of Garageband '11.
I'm trying to record a simple piano/guitar piece of music. All finished, and just want to export it now.
I find that when I export the file, no matter which volumes I change, it comes out at the same volume. Too loud. I know the normal complaint is it's too low. Mine is that no matter what I reduce (master volume, individual instrument volumes etc) I cannot get it any lower.
I'm tried not compressing the file on exporting. Makes no difference. I've tried sending to iTunes instead of exporting. Makes no difference. I've tried playing in different players [e.g. vox] makes no difference.
Please can someone help me with this?
The advice online seems to be that if you reduce the master volume meter thing, then the export volume will be lower. This is not the case. At least, not for me.
Any advice/pointers GREATLY appreciated : )
Thanks

williamhaviland wrote:
The advice online seems to be that if you reduce the master volume meter thing, then the export volume will be lower. This is not the case.
turn off Auto Normalize in GB's prefs first

Sound volume too high

I have express linked to powered speakers (BeoLab 3), it all works great, but it is too loud. I change volume using the iTunes, but at the quiet end one click goes from inaudible to waking-the-kids-up-loud. It does not seem to matter what the system volume is set at. Can I solve this with iTunes or my Mac as the speakers have no volume adjustment on them.
thanks

Same issue here. I suspect they will come up with a remote volume control. In the meantime click on the EQ icon in iTunes (right besides the choose the room icon) and set the preamp to -12db.

Emu volume too high on MIDP 16 bit wavs

Hi, I've written a program that renders to a 16 bit (signed) wav stream in memory.
It sounds fine on the phone....but when I play it back though the emulor it distorts horribly unless I divide the volume by about 4 while playing.
If I export the file and look at it in an wave editor it looks fine. I've run the java code under windows and it sounds fint there too.
So the only thing that's distorting the sound is the toolkit.
This happens on all the generic phone types as well as all the SE phone toolkits.
Does anybody know what's happening here, doesn't seem right at all.
Thanks
Dave

Thanks for reply. Surely, but SURELY the emu can play 16 bit sound properly!!! Isn't it just a basic windows thing!
It's a shame, because the emu is fairly good at everything else. It's something easy to fix, no?
D

Volume too high making Facetime calls on iPod Touch

I just updated my iPod touch to iOS 6 and when I make a Facetime call the volume is too loud even if I turn it down. I tried to restore it several times but nothing changed...what can I do? Do I have to send it to Apple support?
Thanks a lot

I've found no solution myself, having messing with all the settings. The static now audible because of this volume boost is just horrible as well!

1st gen iPod Touch minimum volume too high

I have tried all the equalizer settings and sound check, this is really a problem when using in-ear headphones. Is this any different on the iPhone 4?

Select all of your songs in iTunes, right-click > Get Info. Then go to the Options tab and you'll find a slider labeled "Volume adjustment". Bring that down how you feel fit and hit OK, then sync your iPod touch.
Regards.

Bluetooth volume too loud, volume step 1 is silent

Did this too... Still the same...

When connecting a Sony SBH-20 Bluetooth Headset to my Z1 Compact there is no sound when Bluetooth voume is set to 1. I need to raise it to 2 for the sound to be output and then it is too loud for me when listening to music. SW version in mobile is 1.4.4.A.0.108I have also tried with a Jabra Play BT headset with same result.Update: Now I have tried with a Sony SBH80 and then it works ! Step 1 on the volume does output sound and on a reasonable level when playing music.For the SBH20 and Jabra Play the problem persists, but to be clear the in-call volume works fine on all steps, it is the Media/Music volume that is silent on step 1. It also seams that step 10 does not give any increase for Media on these two headsets. SW error ?

Muvo - volume is too high with new firmw

Hi.
I have a Muvo TX 52 mb with usb2.0, and when i upgraded the firmware to .3.something some months ago i got a problem:
I cant decrease the volume enough with the new firmware!:angry: With the old firmware was volume setting "" very low, and the maximum volume wasnt very high. The new firmware has better mawimum volume but the minimum volume is too high... :-S Hope you understand what i mean.
Today i tried the latest firmware again, .2.02, but its STILL too high volume!
This is really driving me crazy, and propably i would need an OLD firmware (which is much worse in other ways), but i cant find any old firmware too download.
Please help me. Thanks!

I've mailed tech support now. If anyone has old firmware install, _please_ let me konwMessage Edited by muvotx on 07-03-2006 06:27 PM

I had gain too high and mike was too sensitive, now my audio is distorted!

Is there any hope for me? I was using an external directional mike, and I think I had the gain (or mike input volume) too high.
I was recording an outside rock concert, and the sound is muddy, distorted, and horrible. Can I use Soundtrack Pro to clean this up? Is there anything I can do or is the situation hopeless?
Thanks for any help.

All of us who work with technology can tell stories of really bad mistakes we made
as we were learning our craft. Some of them are funny. Some are not. But we learn and move on.
There's nothing you can do about that distortion.
However, from now on, you will always remember to check your levels and monitor your audio.

ORA-25307: Enqueue rate too high

dba_queue_schedules;
SCHEMA   |QNAME      |DESTINATION     |SCHEDULE_DISABLED|FAILURES|LAST_ERROR_MSG
STRMADMIN|CAPT_SRC |target.domain.COM |N                |0       |ORA-25307: Enqueue rate too high, flow control enabled
STRMADMIN|CAPT_SRC |target.domain.COM |N                |0       |ORA-25307: Enqueue rate too high, flow control enabledV$BUFFERED_PUBLISHERS;
QUEUE_SCHEMA|QUEUE_NAME |UNBROWSED_MSGS|OVERSPILLED_MSGS|MEMORY_USAGE|PUBLISHER_STATE
STRMADMIN   |CAPT_SRC      |15043         |0               |30          |IN FLOW CONTROL: TOO MANY UNBROWSED MESSAGESV$BUFFERED_SUBSCRIBERS;
SUBSCRIBER NAME|CNUM_MSGS|TOTAL_DEQUEUED_MSG|TOTAL_SPILLED_MSG
               |20401    |0                 |0
APP_SRC        |0        |0                 |0Anyone pls? whats wrong? is this normal to have a blank subscriber name win cnum_msgs 20401?
Edited by: user13640691 on May 11, 2011 9:38 PM

Sound like you have a propagation problem. Let's check it. I expect to see figures in propagation sender but nothing into receiver or reader.
-- Propagation senders : to run on source site
prompt
prompt ++ EVENTS AND BYTES PROPAGATED FOR EACH PROPAGATION++
prompt
COLUMN Elapsed_propagation_TIME HEADING 'Elapsed |Propagation Time|(Seconds)' FORMAT 9999999999999999
COLUMN TOTAL_NUMBER HEADING 'Total Events|Propagated' FORMAT 9999999999999999
COLUMN SCHEDULE_STATUS HEADING 'Schedule|Status'
column elapsed_dequeue_time HEADING 'Total Dequeue|Time (Secs)'
column elapsed_propagation_time HEADING 'Total Propagation|Time (Secs)' justify c
column elapsed_pickle_time HEADING 'Total Pickle| Time(Secs)' justify c
column total_time HEADING 'Elapsed|Pickle Time|(Seconds)' justify c
column high_water_mark HEADING 'High|Water|Mark'
column acknowledgement HEADING 'Target |Ack'
prompt pickle : Pickling is the action of building the messages, wrap the LCR before enqueuing
prompt
set linesize 150
SELECT p.propagation_name,q.message_delivery_mode queue_type, DECODE(p.STATUS,
                'DISABLED', 'Disabled', 'ENABLED', 'Enabled') SCHEDULE_STATUS, q.instance,
                q.total_number TOTAL_NUMBER, q.TOTAL_BYTES/1048576 total_bytes,
                q.elapsed_dequeue_time/100 elapsed_dequeue_time, q.elapsed_pickle_time/100 elapsed_pickle_time,
                q.total_time/100 elapsed_propagation_time
FROM DBA_PROPAGATION p, dba_queue_schedules q
        WHERE   p.DESTINATION_DBLINK = NVL(REGEXP_SUBSTR(q.destination, '[^@]+', 1, 2), q.destination)
AND q.SCHEMA = p.SOURCE_QUEUE_OWNER
AND q.QNAME = p.SOURCE_QUEUE_NAME
order by q.message_delivery_mode, p.propagation_name;
-- propagation receiver : to run on target site
COLUMN SRC_QUEUE_NAME HEADING 'Source|Queue|Name' FORMAT A20
COLUMN DST_QUEUE_NAME HEADING 'Target|Queue|Name' FORMAT A20
COLUMN SRC_DBNAME HEADING 'Source|Database' FORMAT A15
COLUMN ELAPSED_UNPICKLE_TIME HEADING 'Unpickle|Time' FORMAT 99999999.99
COLUMN ELAPSED_RULE_TIME HEADING 'Rule|Evaluation|Time' FORMAT 99999999.99
COLUMN ELAPSED_ENQUEUE_TIME HEADING 'Enqueue|Time' FORMAT 99999999.99
SELECT SRC_QUEUE_NAME,
       SRC_DBNAME,DST_QUEUE_NAME,
       (ELAPSED_UNPICKLE_TIME / 100) ELAPSED_UNPICKLE_TIME,
       (ELAPSED_RULE_TIME / 100) ELAPSED_RULE_TIME,
       (ELAPSED_ENQUEUE_TIME / 100) ELAPSED_ENQUEUE_TIME, TOTAL_MSGS,HIGH_WATER_MARK
FROM V$PROPAGATION_RECEIVER;
-- Apply reader : run on target system
col rsid format 99999 head "Reader|Sid" justify c
COLUMN CREATION HEADING 'Message|Creation time' FORMAT A17 justify c
COLUMN LATENCY HEADING 'Latency|in|Seconds' FORMAT 9999999
col deqt format A15 head "Last|Dequeue Time" justify c
COLUMN DEQUEUED_MESSAGE_NUMBER HEADING 'Last dequeued|scn ' FORMAT 999999999999 justify c
SELECT APPLY_NAME, sid rsid , (DEQUEUE_TIME-DEQUEUED_MESSAGE_CREATE_TIME)*86400 LATENCY,
        TO_CHAR(DEQUEUED_MESSAGE_CREATE_TIME,'HH24:MI:SS MM/DD') CREATION, TO_CHAR(DEQUEUE_TIME,'HH24:MI:SS MM/DD') deqt,
        DEQUEUED_MESSAGE_NUMBER FROM V$STREAMS_APPLY_READER;

IPod minimum volume level is too high

Hey,
The title pretty much says it all. I got a used iPod for Christmas. I'm having 2 problems: the volume range seems to be very limited, and the minimum volume is too high. (Akin to this post: https://discussions.apple.com/thread/4111969?start=0&tstart=0
Anyways, I was wondering if the Volume Adjustment feature will lower the volume of the songs on my iPod, or only on the computer.
iTunes 11.0.1
Windows 7
iPod Classic 160 Gb
Thanks!

I read that theser is a volume issue with some players in the FAQ.
I tried following the link for more information, but its broken. What did it say ?

I am having trouble fading out a song at the end of an iMovie. Also, the volume of the song is too high...I would like it to be more background music? I have tried everything and can't figure it out...Can anyone help me, Please!!??

I am having trouble fading out a song at the end of an iMovie. Also, the volume of the song is too high...I would like it to be more background music? I have tried everything and can't figure it out...Can anyone help me, Please!!??

Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

T400 Volume too high. Volume control broken.

Similar Messages

Maybe you are looking for