T400 windows 7, blue screen memory_management and IRQL_NOT_LESS_OR_EQUAL

Hi can anybody help me solving this problem? I have T400 with windows vista 32. I upgraded it into windows 7. And now my laptop is having problem with the blue screen when the windows started it says about memory management or IRQL that asked me to disable the BIOS memory such as caching or shadowing.... What do you guys reckon?? Cheers.

I used to get that BLUE SCREEN ALL THE TIME
I stoped getting it one after I slipstreamed windows xp pro to sp1 and did a clean install
I use latest nvidia http://www.nvidia.com
I use the latest via drivers http://www.via.com.tw
also you should check to make sure your video card is seated properly take it out and put it back in
clear cmos/bios
check your memory make sure it's seated properly also try moving it around I found that the middle slot was bad on my board but I have a K7T266 pro2 v2 thank god I have a three year warenty still time to rma when every I get around to upgrade

Similar Messages

SB Live ! 24 bit external USB and windows seven blue screen

;SB Li've ! 24 bit external USB and windows seven blue screen+ hi! i have installed windows seven 64 bit build 7600 RTM on my PC and i wanted to install also my USB sound card which is SB Li've ! 24 bit and i downloaded the beta drivers from creative. instalation was really fast and smooth but at the end i've got a message that the program has stopped to response and i have closed it. i did a system reboot and i have seen that the sound card has been installes succesfull and also the control panel. Sound was clear and really nice, all worked fine but sometimes im getting a blue screen on my windows with a code STOP 0x000000E and then a file named usbuhc.sys was the problem. i think that the sound card is the thing that is doing the blue screen becouse i have only a keyboard, mouse and the sound card SB Li've ! installed as USB.
Is it normal that i have those troubles on my PC ? is it my sound card my windows seven problem ? what should i do now ?
at the moment i have turned off the sound card so i will see if i get a blue screen or not.
thanks for any reply

? yes, i have also tried to download the beta drivers again and re-install them but i have still the same problem :/ it happens in a different time, sometimes after hour or sometimes after 0 hours when my computer is turned on. my system is mostly turned on becouse im downloading some stuff so it is running all the day, sometimes im surfing websites but its nothing special. I really dont know what to do :/@83.30.93.77

Blue screen error and unexpected reboot - km:x64_0xf4_java.exe_image_csrss.exe,

Blue screen error and unexpected reboot - km:x64_0xf4_java.exe_image_csrss.exe,

On Wed, 4 Mar 2015 11:19:38 +0000, Perumal Ramasamy wrote:
Blue screen error and unexpected reboot - km:x64_0xf4_java.exe_image_csrss.exe,
This forum, as per the name, is only for Windows 10 Server questions.
Please repost to:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver
Paul Adare - FIM CM MVP
AAAAAA - American Association Against Acronym Abuse Anonymous.

Windows 7, Blue Screen Local ID: 1033

Lately i get this Blue Screen error and i have no idea what i should do:
Problem signature:
Problem Event Name:   BlueScreen
OS Version:   6.1.7601.2.1.0.256.1
Locale ID:   1033
Additional information about the problem:
BCCode:   50
BCP1:   FFFFFAFDF700001A
BCP2:   0000000000000000
BCP3:   FFFFF80003178F5C
BCP4:   0000000000000005
OS Version:   6_1_7601
Service Pack:   1_0
Product:   256_1
Files that help describe the problem:
C:\Windows\Minidump\020214-15740-01.dmp
C:\Users\Maria\AppData\Local\Temp\WER-47221-0.sysdata.xml

MH
These were related to amifldrv64.sys belong to CLICKBIOSII module developed by MSI. I would install the newest driver available.
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Machine Name:
Kernel base = 0xfffff800`02e13000 PsLoadedModuleList = 0xfffff800`03056670
Debug session time: Tue Sep 17 10:40:08.022 2013 (UTC - 5:00)
System Uptime: 0 days 0:00:28.849
Loading Kernel Symbols
BugCheck 50, {fffffaf5b100001a, 0, fffff80002f7af5c, 5}
*** WARNING: Unable to verify timestamp for amifldrv64.sys
*** ERROR: Module load completed but symbols could not be loaded for amifldrv64.sys
Could not read faulting driver name
Probably caused by : amifldrv64.sys ( amifldrv64+188c )
2: kd> !analyze -v
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffffaf5b100001a, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80002f7af5c, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000005, (reserved)
Debugging Details:
Could not read faulting driver name
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030c0100
GetUlongFromAddress: unable to read from fffff800030c01c0
fffffaf5b100001a Nonpaged pool
FAULTING_IP:
nt!MmFreeContiguousMemory+ec
fffff800`02f7af5c f6411a20 test byte ptr [rcx+1Ah],20h
MM_INTERNAL_CODE: 5
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: SCEWIN_64.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
TRAP_FRAME: fffff8800b252610 -- (.trap 0xfffff8800b252610)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000058000000000 rbx=0000000000000000 rcx=fffffaf5b1000000
rdx=0000000fffffffff rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002f7af5c rsp=fffff8800b2527a0 rbp=fffff8800b252b60
r8=fffffa800a0ae010 r9=00000000000000a0 r10=fffffa800670b210
r11=fffffa800a0ae010 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na po cy
nt!MmFreeContiguousMemory+0xec:
fffff800`02f7af5c f6411a20 test byte ptr [rcx+1Ah],20h ds:fffffaf5`b100001a=??
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80002f055a3 to fffff80002e88c00
STACK_TEXT:
fffff880`0b2524a8 fffff800`02f055a3 : 00000000`00000050 fffffaf5`b100001a 00000000`00000000 fffff880`0b252610 : nt!KeBugCheckEx
fffff880`0b2524b0 fffff800`02e86d2e : 00000000`00000000 fffffaf5`b100001a fffffa80`08a81a00 fffff880`0273d000 : nt! ?? ::FNODOBFM::`string'+0x43801
fffff880`0b252610 fffff800`02f7af5c : fffffa80`0a0ae010 fffff880`0a4014e7 fffffa80`1fffc000 fffffa80`0a306290 : nt!KiPageFault+0x16e
fffff880`0b2527a0 fffff880`0a40188c : fffffa80`0a0ae010 fffffa80`08a81980 fffffa80`08a81980 00000000`00000016 : nt!MmFreeContiguousMemory+0xec
fffff880`0b2527e0 fffffa80`0a0ae010 : fffffa80`08a81980 fffffa80`08a81980 00000000`00000016 fffff800`03018730 : amifldrv64+0x188c
fffff880`0b2527e8 fffffa80`08a81980 : fffffa80`08a81980 00000000`00000016 fffff800`03018730 fffffa80`08a81980 : 0xfffffa80`0a0ae010
fffff880`0b2527f0 fffffa80`08a81980 : 00000000`00000016 fffff800`03018730 fffffa80`08a81980 fffffa80`0a269b10 : 0xfffffa80`08a81980
fffff880`0b2527f8 00000000`00000016 : fffff800`03018730 fffffa80`08a81980 fffffa80`0a269b10 fffff880`0a4019b4 : 0xfffffa80`08a81980
fffff880`0b252800 fffff800`03018730 : fffffa80`08a81980 fffffa80`0a269b10 fffff880`0a4019b4 00000000`00000001 : 0x16
fffff880`0b252808 fffffa80`08a81980 : fffffa80`0a269b10 fffff880`0a4019b4 00000000`00000001 00000000`00000001 : nt!NonPagedPoolDescriptor+0x1b0
fffff880`0b252810 fffffa80`0a269b10 : fffff880`0a4019b4 00000000`00000001 00000000`00000001 00000000`000000a8 : 0xfffffa80`08a81980
fffff880`0b252818 fffff880`0a4019b4 : 00000000`00000001 00000000`00000001 00000000`000000a8 fffff800`02f93744 : 0xfffffa80`0a269b10
fffff880`0b252820 00000000`00000001 : 00000000`00000001 00000000`000000a8 fffff800`02f93744 00000000`00000000 : amifldrv64+0x19b4
fffff880`0b252828 00000000`00000001 : 00000000`000000a8 fffff800`02f93744 00000000`00000000 fffffa80`0a306290 : 0x1
fffff880`0b252830 00000000`000000a8 : fffff800`02f93744 00000000`00000000 fffffa80`0a306290 fffffa80`0a269b10 : 0x1
fffff880`0b252838 fffff800`02f93744 : 00000000`00000000 fffffa80`0a306290 fffffa80`0a269b10 fffff880`0a401bff : 0xa8
fffff880`0b252840 fffff880`0b252928 : fffff880`0b252968 fffffa80`0a41b060 00000000`00000001 fffff880`0b252960 : nt!EtwpCCSwapTrace+0x4d4
fffff880`0b252900 fffff880`0b252968 : fffffa80`0a41b060 00000000`00000001 fffff880`0b252960 00000008`0a43ab01 : 0xfffff880`0b252928
fffff880`0b252908 fffffa80`0a41b060 : 00000000`00000001 fffff880`0b252960 00000008`0a43ab01 fffffa80`0a306290 : 0xfffff880`0b252968
fffff880`0b252910 00000000`00000001 : fffff880`0b252960 00000008`0a43ab01 fffffa80`0a306290 00000000`00000008 : 0xfffffa80`0a41b060
fffff880`0b252918 fffff880`0b252960 : 00000008`0a43ab01 fffffa80`0a306290 00000000`00000008 00000000`00000000 : 0x1
fffff880`0b252920 00000008`0a43ab01 : fffffa80`0a306290 00000000`00000008 00000000`00000000 fffffa80`0a269b10 : 0xfffff880`0b252960
fffff880`0b252928 fffffa80`0a306290 : 00000000`00000008 00000000`00000000 fffffa80`0a269b10 00000000`00000000 : 0x00000008`0a43ab01
fffff880`0b252930 00000000`00000008 : 00000000`00000000 fffffa80`0a269b10 00000000`00000000 fffffa80`06743820 : 0xfffffa80`0a306290
fffff880`0b252938 00000000`00000000 : fffffa80`0a269b10 00000000`00000000 fffffa80`06743820 fffffa80`0a3062e0 : 0x8
STACK_COMMAND: kb
FOLLOWUP_IP:
amifldrv64+188c
fffff880`0a40188c ?? ???
SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: amifldrv64+188c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: amifldrv64
IMAGE_NAME: amifldrv64.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4accc6d8
FAILURE_BUCKET_ID: X64_0x50_amifldrv64+188c
BUCKET_ID: X64_0x50_amifldrv64+188c
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0x50_amifldrv64+188c
FAILURE_ID_HASH: {2881f1e0-4106-fe9b-c0f6-de1062eca6a6}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag

Windows 7 blue screen on reboot

Hello,
what is a problem here?
- I bought a new laptop ASUS x751MA with a FreeDOS OS, i try to install Windows 7 and between the installation the blue screen appear and send an error with text: "The BIOS in this system is not fully ACPI comiliant". I replace(update) the BIOS
with version 206. But still doesn't work ...
Thank you
- Sorry for my english. -

Hi,
In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
If you don't know where .DMP files are located, here's how to get to them:
1. Navigate to the %systemroot%\Minidump folder.
-- %systemroot% is the environment variable for your Windows directory. For example, C:\Windows.
2. Copy any and all .DMP files in the Minidump folder to your Desktop, create a new folder on the Desktop to put these .DMP files in, and then zip the folder. You can then either use a 3rd party tool such as 7-Zip/Winrar, or you can use Windows'
default method of zipping folders.
Compress and uncompress files (zip files).
Please note that any "cleaner" programs such as TuneUpUtilities, CCleaner, etc, by default will delete .DMP files upon use. With this said, if you've run such software, and your Minidump folder is empty, you will need
to allow the system to crash once again to generate a crash dump.
3. Upload the .ZIP containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply.
Preferred sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers, download managers, etc.
4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel Memory Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
between Small Memory Dumps and Kernel Memory Dumps in the simplest definition is a Kernel Memory Dump contains
much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel Memory Dump is
the best choice. Do note that Kernel Memory Dumps are much larger
in size due to containing much more info, which is why I mentioned upload speed, etc.
If you are going to use Onedrive but don't know how to upload to it, please visit the following:
Upload photos and files to Onedrive.
After doing that, to learn how to share the link to the file if you are unaware, please visit the following link -
Share files and folders and change permissions and view 'Get a link'.
If your computer is not generating .DMP files, please do the following:
1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for
all drives'.
3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the
system log'.
Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
4. Double check that the WERS is ENABLED:
Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
If you cannot get into normal mode to do any of this, please do this via Safe Mode.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama

My MacBook desktop wallpaper has dissapeared and now its just a blue screen? and my toolbar at the bottom of the screen has dissapeared as well. Please can someone help !!?

my MacBook desktop wallpaper has dissapeared and now its just a blue screen? and my toolbar at the bottom of the screen has dissapeared as well. Please can someone help !!?

Try restarting your Mac.
If that doesn't help, open a Finder window. Select your Home folder (it has a small house icon) in the Sidebar on the left.
Now open the Library folder then the Prefernces folder.
Move the com.apple.desktop.plist file to the Trash. Restart your Mac one more time.

Blue screen shows and this error code shows up 0x1900101 - 0x4000D

The installation starts correctly to a state where the blue screen shows and restores windows to its previous state and gives this error code 0x1900101 - 0x4000D

Hi,
For error information:
0xC 1900101- 0x4000D - MOSETUP_E_SETUP_PLATFORM
This can happen during the data migration phase in the second boot.
You can send your rollback logs to me, I would look into it to see if we can find something.
C:\$Windows.~BT\Sources\Rollback\setupact.log
You can send it to this email address:
[email protected]
Alex Zhao
TechNet Community Support

Blue screen on start up. The wheel spin and the blue screen gets brighter for a second, then the blue screen dims and it repeats with the wheel.

When I start up my imac, I get a blue screen. The wheel spin and the screen gets brighter for a second, then the blue screen dims and it repeats with the wheel.

Are you referring to the startup screen which is normally gray with the dark gray Apple logo or are you referring the login screen which is typically blue? If it's the latter you might give this a try:
Clearing Caches to Fix Login Problem
You will need to type some Unix commands. If you are not comfortable with this, I don't know of anything other than a re-install. But if you are careful, you should be OK. I recommend you print this out in a largish mono-spaced font so you don't miss any spaces (or add extra ones). Note that case is important.
Be careful. Some of these commands are dangerous, since you are going to be root.
Start up in Single-user Mode. When this has finished you will see a prompt ending in '#', although there may be other messages. Enter the following commands after the prompt:
/sbin/fsck -fy
Press RETURN. Wait a few seconds for 8-10 lines of output. If the last line says repairs were carried out, repeat this command until you get a message 'The volume <yourdiskname> appears to be OK'. Then continue with:
/sbin/mount -uw /
cd /Library/Preferences
rm com.apple.loginwindow.plist
rm com.apple.windowserver.plist
cd /Library/Caches
rm -r *
cd /System/Library
cd /System/Library/Caches
rm -r *
reboot
Press RETURN after each command.
This should now take you to a proper login screen after the normal boot sequence. You should then Repair Permissions by using Disk Utility (in your /Applications/Utilities folder).
If it's the former then reinstall OS X. For Snow Leopard:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Hp mini wa545ua#aba windows 7 blue screen of death and won't load operating system

I tryed to run my computer and the blue screen came up and it wouldn't load micosoft help

To enter the BIOS filip the power button and quickly tap the F10 key.
Select the Diagnostics section and run a memory test and a hard disk self test.
Post your results here.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Boots to windows startup screen, flashes blue screen, restarts and repeats

HP ENVY H8-1414 Product #H3Z00AAR
Windows 7 Ultimate 64-bit
Alright, so here is my issue. I turn on my pc and it gets as far as the windows startup screen, flashes a blue screen error for about half of a second and then restarts it self. My HDD is recognized in the bios. Tried a memory test in diagnostics and it passes. Tried a hard disc check and it passes the SMART check but fails the Long DST with a failure ID of 0GF21L-0006LR-WPVX0K-61C703 (no idea if those a zeros or O's)
I've also tried the startup repair but it did nothing. So I removed the hard drive and tried to use it in a different PC but had the same issue so I figured the hard drive went bad. Then I tried formatting a spare hard drive and installed a fresh copy of windows 7 on it, tried it on a different PC and it works just fine. However, when I try to use that hard drive on the HP ENVY I get the exact same problem even though it worked just fine on a differenct pc.
I purchased this PC refurbished about 3 months ago, the warrenty just ended a week ago. There have been no hardware or software changes on it at all. This thing worked flawlessly last night... I locked the computer before bad and I woke up to this. No power outages over night or anything. It just doesn't make any sense.

Here are the specs for your HP ENVY h8-1414 Desktop Computer. According to the specs, this model came from the factory with Windows 8 installed. The "blue screen" and restart are normal for Windows 7, when it encounters an error, unless you have altered the default settings.
The LONG DST failure is indicative that the hard drive has failed or is about to fail. Unless the hard drive is moved to an identical or very similar computer, Windows will encounter a "blue screen. This is true with the original hard drive moving from the h8 computer to the other computer and the test hard drive from the other other computer moving to the h8 computer.
Try placing the "test" hard drive in the h8 computer and installing Windows 7 from a DVD or USB stick. If you have any problems, please post back with full error messages and screen shots. Also indicate what stage of the install Windows 7 was doing tat the time.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Windows 2008 R2 Sp1 Blue Screen Error and solution

Hi Guys its been like the 5th time i keep on getting this error on my exchange server which is hosted under Windows 2008 R2 Sp 1 this is the error below please help
Problem signature:
Problem Event Name:   BlueScreen
OS Version:   6.1.7601.2.1.0.274.10
Locale ID:   1033
Additional information about the problem:
BCCode:   4a
BCP1:   000000007719133A
BCP2:   0000000000000002
BCP3:   0000000000000000
BCP4:   FFFFF880094B2CA0
OS Version:   6_1_7601
Service Pack:   1_0
Product:   274_3
Files that help describe the problem:
C:\Windows\Minidump\061714-141960-01.dmp
C:\Users\Asger\AppData\Local\Temp\WER-292189-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Regards
Asger
Regards, Asger

Hi Asger,
Would you please let me confirm whether this BSOD issue occurred suddenly? If you can reproduce the problem, please perform a
clean boot and check if this issue still persists.
For this BSOD issue, we may need to analyze the crash dump file to narrow down the root cause of it. Please refer to following article and check if can help you to analyze
the dump file.
How to read the small memory dump file that is created by Windows if a crash occurs
How to Debug Kernel Mode Blue Screen Crashes
(for beginners)
You got a B.S.O.D. (Blue Screen
of Death, known as Bug Checks), now what?
By the way, it is not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer Service
and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Hope this helps.
Best regards,
Justin Gu

Windows XP blue screen and 0x00000050 when starting ITunes up

when starting ITUNES after the upgrade to 7.3, I now get the blue screen of death.
Windows XP service pack 2 is installed
message is STOP: 0x00000050 (0xF8ac0000, 0x00000000, 0xF8ac0000, 0x00000000)
I have installed different video cards and removed my sound card from the system but problem still remains. I did change the QUICKTIME settings as suggested for Vista problems but problem still remains.
ITUNES will only run in SAFE MODE
help please... i miss my music

this is the information from the event log viewer. no files are referenced
Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 8/29/2007
Time: 2:21:22 PM
User: N/A
Computer: DAD_ASUS
Description:
Error code 10000050, parameter1 f79f0000, parameter2 00000000, parameter3 f79f0000, parameter4 00000000.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 35 1000005
0020: 30 20 20 50 61 72 61 6d 0 Param
0028: 65 74 65 72 73 20 66 37 eters f7
0030: 39 66 30 30 30 30 2c 20 9f0000,
0038: 30 30 30 30 30 30 30 30 00000000
0040: 2c 20 66 37 39 66 30 30 , f79f00
0048: 30 30 2c 20 30 30 30 30 00, 0000
0050: 30 30 30 30 0000

HP 100B All-in-one PC Windows 8 Blue screen Keeps Restarting

I am working from an HP 100B All-in-one PC running Windows 8 Professional; it is a workplace computer that I use for office work and such. I have been having the problem of my computer restarting and giving me a blue screen in the middle of trying to complete a task. I cant pin point the error message because it gives me a different one everytime it restarts. I am baffled as to what is causing this problem, as for now my only guesses are that there may be a problem with the file system and some required files are not present or have been deleted. My second guess is that it may be a motherboard problem. Has anyone had this problem, can anyone offer assistance? Would HP offer any service assictance, and can someone direct me the website wherein HP handles their hardware support claims?
Two of the error messagees which i recorded are as listed:
IRQL_NOT_LESS_OR_EQUAL
UNEXPECTED_KERNEL_MODE_TRAP

Could you please give me the exact product number for your computer?
If you need help finding it, you can use the following link:
http://h10025.www1.hp.com/ewfrf/wc/findModel?cc=us&dlc=en&lc=en
Thanks,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Windows 7 Blue Screen - Random Shut Down

I'm having problem with my Toshiba Satellite L505 which randomly shows a blue screen prior to shutting down and restarting. I have use my system recovery disk to return my computer back to it's original state. The computer worked fine for a couple of month but has crashed again. Below is a sample of the blue screen messages prior to shutting down:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
KMODE_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff800032a526b, 0x0000000000000000,
0x000000007efa0000)
*** ntoskrnl.exe - Address 0xfffff800032c4c40 base at 0xfffff8000324f000 DateStamp
0x50e79935
2nd blue screen crash message
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: PCIIDEX.SYS
KMODE_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff800033c6cda, 0x0000000000000001,
0x0000000000000018)
*** PCIIDEX.SYS - Address 0xfffff88000e879d4 base at 0xfffff88000e86000 DateStamp
0x4a5bc114
Does anyone know what this means and would be able to help.

Hiya
Run a full computer scan with your antivirus software. virus Backdoor.NTHack. may be the problem, and it runs Dl.bat in folder InetPub\Scripts.When you boot up the computer, go to task menager (CTRL+ALT+Delete), look if you have this runned: Firedaemon.exe, Sud.exe, Os2srv.exe, Mmtask.exe.
2. If you have a CARD READER than go to bios "Integrated Peripherals" and set Legacy USB storage detect to DISABLED
Let me know if you get any more problems

Windows gives Blue screen of death when connect ipod

I have an ipod 20g and everytime i connect it to my 2.0 usb windows freezes gives me a blue screen and restarts

same problem here, also with a 20gb ipod. Mine also shuts the PC down on a disconnect of the ipod as well although this is less frequent.
I was using the USB2 ports on the front of my Dell but I've swithed them round now and am using a Firewire port on the back and touch wood it hasn't happened in the 2 days since I switched over.

T400 windows 7, blue screen memory_management and IRQL_NOT_LESS_OR_EQUAL

Similar Messages

Maybe you are looking for