T400 Wireless Wan/Mobile Broadband device not found

Using T400 and check the parts in lenovo site; shows only WLAN 5100 CARD and no WWLAN card. What do I to have this working?

I couldn't find your system on the support site, maybe it's too new. Are you sure that you ordered with WWAN and not an upgradeable T400? All systems will have the SIM slot.
Go to this site and enter your type and serial numbers, then click on continue. This will present you with a list of components used to build your system, hopefully a WWAN module will be listed.
Please do NOT post your s/n in the forum.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Similar Messages

T410 broadband device not found

Hello
I am trying to get the built in broadband device work (of course i have purcached the device and installed the hardware aswell as all the required softwares and driver which means the qualcomm gobi 2000 usb composite device 9205 driver and all the thinkvantage sofwares: access connection, active protection system, keyboard customizer utility, mobile broadband connect)
What i'm experiencing is that in the wireless connection status window / mobile broadband tab , under the connection status i see that it has recognised the t-mobile network i should be able to connect to. It says that i have a working connection for minutes with a good quality signal, but when i actually try to connect through the acces connections i get the error message of "connection failed" and i have the two options: "help me fix this" and "close" after i chose the help it goes to the diagnostic tools where the connection status is "not connected" cause "service provider not found" ...then i go to the "sign-up and support" button which leads me to the mobile broadband connect window where i get the following error "no wireless mobile broadband device found" and at the background it also says mobile broadband device not found.
I have tried to reinstall all the drivers and softwares replacing them with the latest ones which didn't have any effect on my problem.
Also i have checked the BIOS settings or my computers wireless settings in-case something is wrong, but everything was set as it should.
At last i have updated the BIOS to the latest one found on your site ( which is 1.32 2010/09/17) but still no change, and i am absolutely sure that the hardware device is installed correctly onto the laptops board.
I'm attaching a capture of the sreen which contains most of the details you need to know, in case i have missed something please let me know.
http://noob.hu/2010/11/15/Capture.JPG
Thank you in advance.
Best regards.
Gergő Csorba
B.Braun Medical Ltd.
Moderator edit: Converted pic >50k to link per the Community Rules. Removed Gergő's mobile number so that he doesn't get an unwanted fan club texting and calling.

Here's the Link for the 2539-AJ6, it does indicate that you have Bluetooth. Dowload and install the latest drivers.
http://support.lenovo.com/en_US/downloads/default.page?

Mobile Broadband Unit not found for T400 WAN

Hello,
I've got a Lenovo T400 27658JG with Win 7 64bit and I try to activate my Mobile Broadband Unit.
I've loaded down the driver: Lenovo Mobile Broadband Version 3.5.0011 and the ericson and AT&T driver (which worked properly on XP)
When i'm launching the exe I got the following message:
Mobile Broadband Unit is not found.
It would be nice if somebody could help me
Thanks in advance
Solved!
Go to Solution.

jhs wrote:
I've got a Lenovo T400 27658JG with Win 7 64bit
This is the configuration for a 2765-8JG
P8700(2.53GHz), 2GB RAM, 320GB 5400rpm HD, 14.1in 1440x900 LCD, 256MB ATI Radeon HD3470, CDRW/DVDRW, Intel 802.11agn wireless, WWAN option, Bluetooth, Modem, 1GB Ether, UltraNav, Sec Chip, FPR, Camera, 6c Li-Ion, Win7 Pro 32
WWAN option means that it has the SIM card reader and WWAN antennas fitted but there is no WWAN card fitted, so that is why the Mobile Broadband Unit is not being found!
Cheers,
Bill
I don't work for Lenovo

HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

Have had HP Officejet Pro L7590 All-In-One Printer for years. Always worked fine and I had no issues printing via wireless connection. Several months ago.. Possibly after a Windows 8 update. From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature. When I try to print or scan it shows the printer as offline. Also get an error message that tells me "HP Imaging device is not found". I can still print when connected to USB. Cannot scan or use features of the HP software suite. I have tried several times to correct. Reloading the software and drivers several times, but no success. I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it. Then tried to print something and got the same error message I have seen in the past. I have talked to certain supports saying that it may be a firewall setting within Windows. Any other suggestions? Thanks

Hi @rfjones002,
Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
I would like you to start with the steps listed below:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and download and install the software here >
HP Officejet Pro Full Feature Software and Driver
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Photosmart 7515 connect via USB but not wireless, Device not found on Network

Purchased a 7515 all-in-one, was able to setup wirelessly to MacPro but has lost ability to connect wirelessly. This happened with OS X Lion and nor MountainLion. Have a TimeMachine Airport. Printer connects to network but during setup from MacPro, repeatedly get "Device Not Found on Network" after stepping through wireless installation setup screens. I have reset router, printer, firmware updates, software updates.... at wits end. I have followed the instructions on the below resource page link with no luck. Use WPA-PSK encryption (Automatic AES or TKIP) on network and diagnostics on printer pass.
Please help anyone!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02946597&tmp_task=solveCategory&cc=us&dlc=en&la...

It sounds like the Macs and the printer just aren't communicating.
If you press the network icon on the printer, does it indicate it is connected to the network?
I recommend two additional steps that are not listed in the linked document. The printing system of the Mac may need to be reset as it will clear any software that could be interfering (such as corrupted installations).
Follow the steps as outlined for 10.7 or 10.8 in this document from HP.
The next step is to install the driver package from Apple. This can be found here.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Can a Mac Update disable a USB mobile broadband device?

Hi all,
Last night, my Clear internet went down on me, both home WiFi modem and plug-in USB mobile broaband device. One minute I was on the net and the next, not. After wasting 2 hours with Clear customer service, I gave up and started Googling and found some lovely folks here on Apple Support communities that suggested uninstalling Intego Virus Barrier X6. Well that worked to get my home WiFie modem up and running. But my MacBookPro (10.5.8) doesn't still see the USB device plugged in. It's not my USB port, as other devices work fine plugged into the same port.
I called Clear customer service back and they suggested that there is some phantom Mac Update that has disabled my USB device. I know they're bs-ing me. I think the device is broken. But I thought I"d see if any other Mac people have had a problems with a mobile Broadband device in connection with either Virus Barrier or Mac updates? I've googled lots of search terms and can find no one else with this complaint

No.
It is possible for the Mac (or another computer) to update the firmware of a device, but you would know if you did that. Likewise it is possible for the Mac to be unable to detect the device through its own fault - such as the Mac's USB ports or wifi failing. But the Mac's updates are only for the Apple hardware and software. Also, updates take effect immediately. Were you installing an update when your connection went down?
I think their tech support people are trying to get you off the line. If such a thing happened people would be reporting it all over the place, not just here. Ask them to point you to some reports. Ask which update did it.
Best of luck.

Connect Mobile Broadband device to Airport Extreme?

Hi,
I'm thinking about changing broadband service providers. I'm considering getting a mobile broadband device from either Virgin mobile or Netzero. Both of these devices will allow me to connect up to 5 devices but when I start thinking about computers, phones, printers, iPad...we have more than 5 devices in the house that would want to connect to the wireless network. I am corrently using an airport extreme (which I love). Does anyone know if it's possible to connect one of these mobile broadband devices to the airport for a larger network? If so, how?
Thanks in advance,

Hello,
I guess that it would be correct to assume that you have looked at hotspot devices (small access points or routers with Wi-Fi capabilities). The following discussion concerned a similar problem, where Bob Timmons suggested to use Ethernet between routers. Unfortunately, a hotspot may not have an Ethernet (LAN) port at all.
https://discussions.apple.com/thread/4033477
One solution could possibly be a slightly different approach. There are several dedicated mobile broadband routers available (from Dovado, Netgear, Cradlepoint, and others). These typically accept a USB mobile broadband modem (check that the router has support for the exact model and the phone network in question). These routers do usually have at least one LAN port (which may allow a wired connection to another router, if merely the Wi-Fi capacity would not be adequate).
Jan

Mobile broadband (un2430) not working with Windows 10 on Folio 9470m

I have had Windows 10 installed on my HP Folio 9470m since October last year (insider program). One thing that I never been able to get to work is the mobile broadband device (un2430). It simply says "Radio off". All attempts to re-install driver (which shows as "working"), disable/enable the device etc etc just leads to same result, that the "Radio is off".I googled this a couple of times and found that other users have the same problem. Also colleagues of mine with same model has also the same problem. It works just fine under Windows 8.1. Anyone has a workaround? I was really disappointed when W10 was released that HP did not update the drivers-page with W10 drivers:http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5271102 How can I find out when/if HP will release W10 drivers, including support for mobile broadband, for the HP Folio 9470m?

Thank you for your reply. I've tryed several SIM cards, and arrived to the conclusion that it doesn't work with portuguese operator TMN (all the SIM i've tried from TMN lead to the same result)!
I guess that there is some misconfiguration on WM config files. I found one xml with default configuration for worldwide carriers, and maybe it is possible to change some of those parameters to make it work... I just don't know wich one!
Maybe I'll have some luck, of someone reading this, and that is able to give me a tip to solve the problem.
The SIM card just work well on a 3G usb stick, or even in a celular phone!
Thank you again.

Device Not Found

I have been using a Time Capsule with with Mac Air 13 inch for the last 1.5 years. the Time casule is the main wi-fi router in my network. off late i have started getting a message Device not found, where as the internet is connected. due to this error no data (time machine) back up is available. also this issue leads to internet disconnection on my Mac (where are other devices lice PC's and iphones are connected to the same network without any problem).
Please help me if anyone has a solution.

You hidden the most important thing.. the name of the TC. I don't know why as we can certainly not connect to it remotely.
The name looks wrong though if I am seeing it right.. in terms of being too long and having spaces.. and possibly many of them.
There is a bug.. if you reboot the TC this issue will go away for a few hours.. or days..
Have you rebooted btw??
Do a factory reset of the TC.
Change all names to SMB standard.. that means universal not Apple only.
SMB names that work..
Short.. 2-20 characters
No Space..
Pure alphanumeric.
You need that for TC name.. wireless name/s and hard disk share name.
Please see C9 for a more apple explanation of what long names do.
http://pondini.org/TM/Troubleshooting.html
I would also go back to 7.6.1 firmware.. if not earlier.. 7.5.2 is very stable.. but later Gen4 can only go back to 7.6.x

HP 3050A : Device Not Found on Network

Hi,
Laptop Model: MacBook Air
Operation System: OSx Lion 10.7.3
Printer Model: HP 3050A
Router Model: Linksys WAG160N
WiFi Security Protocol: WPA
TCP/IP IPv4 Protocol: DHCP
Firewall Software: None
I have manage to connect the printer to my WiFi network as the blue indicator is ON and got an IP 192.168.1.104 with Excellent signal strength on the printer. But when follow the HP Setup Assistant I unpluged the USB then I got stuck with the following error message:
Device Not Found on Network
The wireless network settings were successfully downloaded to your device. However, your Mac was unable to locate the device on the network.
Please make sure that:
• Your Mac is connected to a wired or wireless network that has access to your device.
• Your device is connected to the wireless network "speedy".
Click "Retry" to attempt to connect again using the current settings. Click "Go Back" to enter different settings.
I also tried to ping the printer IP but no success
Aliss-MacBook-Air:~ ali$ ping 192.168.1.104
PING 192.168.1.104 (192.168.1.104): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
ping: sendto: No route to host
I am able to print using USB without any problem, but the WiFi never success! Please help!
Regards

Hello,
Thanks for the post. With this one, we may a couple of issues. I've included a link below with some excellent information regarding network connectivity. I might suggest that we start there and try to determine if it's the printer, the MAC or the network. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02731071&tmp_task=solveCategory&cc=us&dlc=en&la...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Can you connect a mobile broadband device to a time capsule?

Can you connect a mobile broadband device to a time capsule?

Only if it has ethernet.. and offers the ip direct to the device ie you need a 3G router not a USB stick..

HP Officejet 4635 Scan Software says Device Not Found

I just successfully installed my new HP Officejet 4635 and can operate it wirelessly. I am able to print and I can scan if I use the buttons on the device itself to tell it to scan. However, when I try to load the HP software, it says "Device Not Found". I tried using the HP Scan and Print Doc and it says everything is fine, but I still cannot load the HP Scan software. I need to be able to scan multiple pages into one file, and I cannot do this by using the control panel that is on the device itself. Anyone else have this problem?

Hello lookinforhelp, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues. I would like to help, but I do need a little information first. I am linking a couple of HP Support documents below that will show you how to find which operating system you are using. Also, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Start-up problem with hp pavilion dv6t-7000‏: "Boot Device Not Found. Hard Disk (3F0)" error

I started getting start-up problems with my hp pavilion dv6t-7000‏. It happens intermittently.
The boot error is:
Boot Device Not Found
   Please install an operating system on your hard disk.
   Hard Disk (3F0)
   F2 System Diagnostics
   For more information, please visit: www.hp.com/go/techcenter/startup
Could a faulty BIOS update cause this problem?
Anyone else who may have experienced a similar problem?
I'd appreciate any help about this problem. Thanks.

Hi
Please find the link given below might help you to fix your issue.
Resolve Boot Device not Found Error Message
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

T410 bluetooth device NOT FOUND

Hello Everyone,
I have a t410, product id is 2539AJ6 (bluetooth included), running Windows 8.
however i can't get bluetooth to work, in addition it seems like there is no trace for a bluetooth device on this computer:
- Can't install driver ("Device not found").
- Not Recognized by Windows 8.
- on BIOS, Security -> I/O Port blah blah -> no mention of bluetooth settings there.
where do i go from here? anybody ever encountered such an issue with bluetooth?
btw, im pretty sure there is a bluetooth device on this laptop.
appreciate any help

Here's the Link for the 2539-AJ6, it does indicate that you have Bluetooth. Dowload and install the latest drivers.
http://support.lenovo.com/en_US/downloads/default.page?

I'm receiving error Boot Device Not Found and Hard disk not exist when I boot up my laptop

I'm receicing the error Boot Device Not Found when i power on my HP G60-235DX laptop. After following HP's recommended troubleshooting steps, I receive error Hard disk not exist. Hmmmm....that's a little concerning. My guess is I need a new hard drive? I have the 17 recovery disks I made when I setup this laptop, however I'm not sure if they will resolve this issue. Any suggestions?

One of 3 things has happened, listed from most likely to least likely
1. Hard drive has died, replace it with one of the same size or larger, then use the HP recovery discs to re-install windows.
2, The motherboard has serious problems. (Replace the notebook)
3. The hard drive cable that connects it to the motherboard has somehow failed, not very likely. (replace the cable)
Replace the hard drive with a new one and use your recovery discs to get Windows back on it.
Here is your service manual, will show you how to replace the hard drive
http://h10032.www1.hp.com/ctg/Manual/c02985882.pdf
Recovery Instructions for Vista
Recovery Instructions for Windows 7

T400 Wireless Wan/Mobile Broadband device not found

Similar Messages

Maybe you are looking for