T400s GPS - Ericsson F3507g Windows 7 drivers

Hi All,
I would like to highlight that drivers for WWAN fro Windows 7 arent working properly. I have T400s with WWAN Ericsson F3507g, 3G broadband is working fine, only GPS isnt working at all. When I open GPS enabler all the time I have stallite acquisition in progress and all values are N/A. Also Garmin Mobile PC isnt able to recognise this GPS. I have tried with preinstalled Windows 7 pro 32 bit, and also with Windows 7 ultimate 32 and 64 bit - always the same GPS not working at all.
After that installed Vista as a test, here GPS is working fine also Garmin is able to operate with it. When Vista drivers are installed in Windows 7 GPS seems to be working but after that wifi profiles in Access connections arent working properly.
All tests were made at the same time (5 minutes) at the same place, so GPS signal was good and conditions were same for Vista and also for Windows 7.
So Lenovo team please fix this problem with GPS drivers for WIN7.
Thank you,
David

Hello all from Lenovo,
I think that there is time for upgraded drivers for F3507g for windows 7 isnt it? I was waiting for WIN7 with this notebook and finally when this version was avaliable on market there is not everything working. So please release some update to get GPS working on WIN7.
Thanks,
David

Similar Messages

  • GPS Error on F3507g & Windows 7 "The GPS NMEA COM Port is not available" x200

    I have an X200 with a WWAN Card 43R153 (Ericsson F3507g) running Window 7.
    The WWAN reliably connects to Vodafone but I can't get the GPS to work.
    Device manager shows this port Enabled:-
    Ericsson E3507G Mobile Broadband MiniCard GPS Port (Com8)
    Driver Invogps.sys from Ericsson AB, Version 1.0.0.28  29/09/2008.
    Thinkvantage GPS version 2.50 is also installed and Lenovo System Update says everything is up to date.
    When I "Turn on GPS" or run 'Lenovs GPS"  I get this message:-
    The GPS NMEA COM port is not available. You need to check the following things.
    - Another GPS application is using the COM port.
    - COM ports is disabled. You can enable the COM port in the Device Manager.
    Location and Other Sensors shows nothing installed.
    I've tried deleting all the drivers and reinstalling but not luck.
    Has anyone else had the same problem and found a solution. I can't think of anything else to try.
    ThinkPad X200 7459-1P0

    If you are running a Windows 7 Weather Gadget on your desktop, try shutting it down entirely and see if that changes your GPS "in use" problem.
    Cheers,
    Bill
    I don't work for Lenovo

  • Thinkpad W500 4058-CTO Ericsson F3507g gone

    Ericsson F3507g WWAN modem disappeared after some time (about one day) from the device list. Since every attempt to restore it failed (UBUNTU etc).
    Please, note that after installation WWAN was working OK and connection with a provider was fine.
    O/S: Windows 7 x64 Professional, all the latest drivers and updates both from Microsoft Update an Lenovo.
    Moderator Note; s/n edited for member's own protection
    Thinkpad W500 4058-CTO Win 7 x64 Professional

    hey amw,
    could you try uninstalling the Ericsson driver first, restart your unit and then reinstall. see if that works.
    curious to know, when the Ericsson card was working; was your unit running on Win 7 Pro ?
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • T500 + ericsson F3507g

    I bought my t500 when it was few months old and I have been using it over a year. Yesterday I decided to remove intel turbo memory chip, because after installing a SSD it was really slowing down boot time. So I took a look into a HW maintenance guide, took a screwdriver and opened the computer. And then, what a suprise: I found an ericsson F3507g card installed. I didn't know I had one, because it never showed in device manager. I'm using win7 64bit.
    I tried installing drivers, etc., but keep geting the same error: Mobile broadband device not found.Windows simply doesn't find it.
    Any ideas?
    Solved!
    Go to Solution.

    I must say I feel quite stupid..it was disabled in BIOS

  • Where are the Windows Drivers?

    Hi,
    When I run Bootcamp 2.0 And try to partition the drive for Vista bootcamps says..."After you have installed and set up windows, insert your Mac OS X Leopard install disc to install additional drivers and other software for windows."
    So I went looking on my install discs. I cant figure out where these Windows drivers are. Anyone know?

    You can also find the drivers in the boot camp download page. Depending on your flavor of Windows (32bit or 64bit), you'll download different updates for Boot Camp 2.1.
    Go here - http://www.apple.com/support/bootcamp/
    On the upper right corner of the screen you will see the Software Updates section. Click on the appropriate link to download the file you need. The files that you download are Windows executables and should only be downloaded in Windows. They can also be run directly from the website, but clicking the Run button (instead of Save) after you click the appropriate download link.
    Hope that helps!
    Christopher Spera
    Sr. Editor, Content
    WUGNET Publications, Inc.
    The Windows User's Group Network
    http://www.wugnet.com

  • Oh my lord, where can I get windows drivers for Macbook Pro?....

    Does Apple really not have any place that I can download Windows drivers for the hardware in my August 2010 Macbook Pro?!?  I am trying to use windows through bootcamp, and I am having tons of trouble.  I know there are supposed to be drivers in the OSX DVD that came with my computer, but that is all the way back in Maryland and I go to school in Tennessee.
    <rant> Sorry if I seem irritated.  I just got over a total hard drive crash in this computer that isn't even 2 years old.  I have drives that are almost 10 years old in my PC desktop..  The drive that came stock with my Macbook pro was a total piece of crap in comparison to the cheapest notebook drives at Best Buy.  Really Apple?? 5400 RPM 8mb Cache Hitachi drive?? *Pukes in mouth* </rant>

    Sorry for the rant.  This is what happens everytime I have tried.  I actually have a booting Windows 7 partition on here already but it is barely running on the stock/generic windows drivers that are just there to get the OS through install. 
    I have an OSX 10.6 disk, but it is 10.6.0, and I wasn't even able to make that boot into the Mac installer when I installed OSX on the new hard drive.  I had to run my Macbook as a Firewire disk plugged into a Mac Pro and install it from there and update to 10.6.8.  I think this was because the 10.6.0 install disk doesn't have drivers for my 2010 revision of the Macbook Pro.  I doubt that the 10.6.0 disk has the right Windows drivers if it doesn't even have the right Mac drivers.

  • Windows drivers on Snow Leopard to use TV tuner stick.

    While I know that there are ways to run a windows app on a mac through vmware and crossover, is there any way I can use a hardware (ENTER USB TV Tuner Stick with a 'Xceive XC2028 silicon tuner' chip) which only has windows drivers on a mac?
    Neerav

    i found one opens source software call MythTV which supports my chip but the installation is super complex.
    i've a set top box which has a tv out and a composite video out. i use the composite video out to watch on my lcd tv. and the tv out is directed to the tv tuner. this tv out is just an extra split of the tv in that my router gets, just incase someone wants both the signals.
    is there any way i can make my mac read a composite signal and record it? i've usb 2.0 and firewire 800 port on my mac. that way i can just leave the set top box on and when i want the mac will just record the on going channel for the duration i mention.
    please advice.

  • Apple Windows drivers on USB, but Windows says I need to format USB to use it

    I set up a 16GB USB drive as my Mountain Lion install disk via the Mountain Lion Installer app.   I ran BootCamp and had it download and put the Windows drivers also onto the USB stick.
    Installed Windows and got to the part where it says I have no drivers.
    So when I now put in the USB drive to install the drivers, Windows is saying "You need to format the disk in drive E: before you can use it.  Do you want to format it?"    ...but that's where the drivers are.
    How was the USB stick formatted originally?  I don't know, presumably with whatever the default from Disk Utility was when I wiped it.
    Ay suggestions? 
    (e.g....reformat the USB with Windows, reboot into OS X (assuming that works), then have Boot Camp Assistant re-put the Windows drivers on the USB, then reboot into Windows, etc?   Trying that now.)
    Thanks.

    The drive must be formatted as FAT32, you can do that on Windows or OSX. Then put the drivers back on it, boot to Windows and install them.

  • Searching Windows Drivers for 23" Display

    Hi,
    I got a 23" Cinema Display and I'm using Windows XP.
    There is still a "Default Monitor" shown in preferences. Where do I get the correct drivers, so I can set the frequency to more than 60 Hz?
    I would appreciate a download link or something where I can find the windows drivers for the Cinema Display.
    Cheers,
    Oli

    You can try WinACD drivers (google for it). LCD panels aren't like CRT monitors and are supposed to run at 60Hz, so there's no reason or way to change it.

  • Does Snow Leopard (10.6) DVD have newer Windows drivers?

    Does anyone know if Apple has included new drivers on the Snow Leopard DVD?
    I'm using Windows 7
    thanks in advance

    do you know for certain if they have been updated since the Leopard 10.5 Windows drivers?
    Yes, they have.
    (47217)

  • Bootcamp 3.2 and Windows Drivers 2.2

    Hi all,
    i'm a little bit confused: There's Bootcamp 3.2 and there are seperate Windows Drivers (current Version 2.2).
    So, does the Bootcamp 3.2 update include a Windows drivers that are included in the 2.2 version of the drivers download?
    Since i updated to Bootcamp 3.2 i have some issues like: Display drivers issue an error (NVIDIA display panel extension can't be loaded), also NVIDIA desktop manager can't be opened (i worked fine when running Bootcamp 3.0).
    I thought about running the Drivers 2.2 update, too but since it's nearly 1 year older than the Bootcamp 3.2 update i didn't do so.
    Just in case: i'm on a MacBook Pro running Windows XP (NVIDIA GeForce 9400 M, Driver version 6.14.11.8861).
    Thanks: Lars

    Hi,
    it's easy to get confused.
    The 2.x Driver packages were introduced with OSX 10.5 Leopard.
    The 3.x Driver packages were introduced with OSX 10.6 Snow Leopard.
    When you have the 3.2 Drivers installed you are up to date with the Drivers Apple provides.
    Nonetheless, especially the Graphics Drivers "outdate" the moment they are released.
    There might be a newer / better driver for the 9400 M avaiable at Nvidias website.
    As always with driver updates: have/make a backup before or at least a 'System Restore Point'. Just in case.
    regards
    Stefan

  • Share Experience - T400 pre-installed with Windows 7

    Hi,
    I have recently ordered a new T400 pre-installed with Windows 7. I am yet to receive my laptop which I am eagerly waiting for, however, I would like to know what has been the experience (good / bad) from the people who have already received thier systems. This will help me check out on those aspects when I receive my system.
    Not sure whether it was a good choice to select 32 bit OS -> Comments please.
    Thanks in advance.
    Following is the configuration that I have ordered for as it appears in my order status
    01. INT.CORE2DUOPROCT9600
    02. GENUWIN7PROFES.32
    03. GEN WIN 7 PRFS 32 US EN
    03. 14.1 WXGA+ TFT, W/ CAMERA
    04. INT.GRAPH.MEDIAACCELX4500
    05. 3GBPC3-8500 1067MHZ2DIMM
    06. KYB US ENGLISH
    07. ULTRNAV(TRP+TOUCHP)FINGERP
    08. 320GBHARDDISKDRIVE,7200RPM
    09. DVDRECORD.8XMAXDUAL,ULTBAY
    10. EXPR.CARDSLOTXN7-1M.CARDR.
    11. INTEGR.BLUETOOTH PAN
    12. INT.WIFI LINK5300
    13. INTG.WIR.WIDENET UPGRAD.
    14. 4 CELL LI-ION BATERRY
    15. BLUETOOTH W/ANTENNA
    16. INTEG.WLESSANTENNA:14.1"

    fundoo77 wrote:
    Not sure whether it was a good choice to select 32 bit OS -> Comments please.
    IMNSHO, always go with a 64 bit OS.  With Win 7 32 you will probabaly be able to use all of your RAM, but if you add more RAM at some point you won't be able to use it without going to a 64 bit OS.
    A 32 bit system can address 4G of address space but Windows tends to reserve the top 1G (more or less) for addressing installed (and future) peripheral devices and graphics card RAM.  Any RAM above ~3G simply goes to wast.
    Just my $.02.  You asked...
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Installing SB Live! Value - Updating Windows Drivers h

    Hey guys,?am installing an old SB Li've! Value (that worked perfectly fine before i reformatted). I downloaded the drivers from the site, so rest assured it's the most updated. When it reaches the part "Updating Windows Drivers, please wait" it stops processing and just hangs there.After some time, i just end the task. An error msg pops up saying "Remote Procedure Call Failed"?Why can't i get it to install? Also, WIndows always automatically "install" drivers for the card everytime i uninstall it and if i don't install the driver from creative.com, i will get BSOD about emu0k.sys (or something like that)?Hope you guys can help?

    What OS are you using, XP, Vista? Did you try installing the drivers with your SB installation CD?
    Dell XPS 600 Intel Pent D 830 3.0ghz
    Chipset- Nvidia nForce4 SLI Intel Edition
    WD 60gb HD
    2gb Ram
    DVD-ROM
    DVD-RW (Plextor 760A)
    Creative XF-I Extreme Music
    Logitech X-540 speakers
    EVGA 7950GT
    Dell 2007WFP (I-SPS panel)
    Win XP SP2
    BIOS A

  • Bootcamp windows drivers doesn't download it at the proces !

    Hello !
    I got this problem :
    When i follow the steps of the bootcamp assistant, it asks like you wanna download the windows drivers and stuff,
    but when i choose that, it sais not avivable, is there a other way to get the drivers...
    ( burning on a cd/dvd or something like that, and install it... )
    Please help me !!!

    This happens often (don't know why.) Just wait a few hours or a day then try again. Be patient.

  • 2 computers running windows-xp. niether will show video in itunes, only a black or a green screen. I went to video card and downloaded the latest windows drivers. All videos worked well after rebooting the drivers.2hours later the screen reverted to green

    i can down load videos to my iphone 4 and play them. I ONLY GET A BLACK  OR GREEN SCREEN AND NO VIDEO USING WINDOWS XP  SP3 .
    I UPDATED THE WINDOWS DRIVERS  FOR THE VIDEO CARD AND EVERYTHING WAS WORKING FINE FOR 2 HOURS. NOW i AM BACK TO THE SAME GREEN SCREEN PROBLEM AND NO VIDEO.
    VIDEO ON YOU TUBE WORKS FINE. IS ANYONE KNOWLEDGABLE IIN THIS AREA?

    Hello, Glenn,
    This forum is really intended for those who are managing iTunes U sites, not for problems with using iTunes U content, per se. You'll probably get more help if you ask in the general iTunes forums:
    iTunes for Windows
    Regards.

Maybe you are looking for