T41 Thinkpad with Anatel wireless card problem

I am working on a Thinkpad with the following information:
T41
Type 2373-9FU
S/N 99-xxxxx
04/07
I tried the Intel drivers that were suggested but, once nothing worked I opened up the machine to find an Anatel wifi card.
The Anatel card has the following information:
Anatel Ambit Microsystem
T60H786U
IC: 349E-T60H786U
CMII ID: 2003DJ1604
If anyone could please help I have been working on this for 2 weeks and this is the final step I need to cover.
Lawrence

this is the cisco card.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-42683
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

Improve Download Speed with Mobile Wireless Card

I just purchased a GT MAX 3.6 Express LaptopConnect Card from AT&T to allow mobile internet access. While I can connect to the internet, the speed is very slow (I'm getting 3 of 7 bars). I understand there might be a Mac "booster" I can purchase. Has anyone heard of such a thing? Or, do you know how I can improve my download speeds with a wireless card? Thanks kindly for your help on this...

I received M Q today. To my surprise, there is no way to connect M Q to PB or any computer. I called Verizon and talked with their data connect department. They confirmed that M Q cannot be used as a modem The only device that will is Treo 700p. I am returning the unit by FedEx today. Treo is xpensive. So I will downgrade from MBP to PB G4 15" and use Verizon's Broadband Wireless PCMCIA card

[Solved] Communicating with nearby laptop with just wireless cards

Is there a way to communicate (e.g. exchange files) between a laptop with a wireless card and a nearby laptop that also has a wireless card, when there is no router nearby? Can two laptops with wireless cards communicate with each other without needing another device?
EDIT:
https://wiki.archlinux.org/index.php/Ad-hoc_networking
Last edited by yktula (2011-05-13 21:38:56)

Please mark the thread as [solved] by editing your title. Our wiki is awesome, as you've already found (more awesome than asking questions on the forums at least ).

Problems with Broadcom wireless card after Kernel Upgrade

After upgrading to version 2.6.39 of the linux kernel, I am having trouble with my Broadcom BCM4312 wireless card. The broadcom-wl driver no longer seems to work, even after reinstalling it from the AUR. The b43 driver seems to be able to connect to unencrypted networks, but can no longer connect to my family's WPA Personal encrypted router. Is anybody else having a similar problem?

As I understand it my laptop has been fine and it uses broadcom-wl, and I just re-yaourt it each time my kernel version changes using a cable in my router. But I believe there is something called dkms and a version of the driver for it, which (I haven't read fully into it) is something like a separate tree, which can (from what little I've read) eliminate this need to recompile every time, however I literally read this 5 minutes ago, from the AUR page for broadcom-wl and a quick google so I wouldn't be surprised if there is more to it than that.

A strange problem with my wireless card

my box is lenovo ideapad y550, the wireless card is intel 5100. After i update to kernel 2.6.32, there is a strange problem occored.
i configure my wireless at /etc/rc.conf like this:
MODULES=(...... iwlagn ......)
wlan_wlan0="wlan0 essid xxxx key s:xxxxxxxxxxxxx
wlan0="dhcp"
INTERFACES=(wlan0)
DAEMONS=(......network......)
it works well at 2.6.31
but at 2.6.32, i find during the archlinux start, it tell me that "dhcpcd time out"
so i remove network from DAEMONS and just load the wireless card's driver module, then i configure my wireless at the bash.
meanwhile, i find another strange appearance
when i use:
ifconfig wlan0 up
iwconfig wlan0 essid xxxx key s:xxxxxxxxxxxxx
dhcpcd wlan0
it tell me "dhcpcd time out"
and then dhcpcd wlan0 again ,it works.
while i use:
iwconfig wlan0 essid xxxx key s:xxxxxxxxxxxxx
ifconfig wlan0 up
dhcpcd wlan0
it works well.
i just put iwconfig before ifconfig, it works~ 囧!
now i have to remove network from DAEMONS at /etc/rc.conf and put the commands in the /etc/rc.local
anyone have ideas?why?
thanx very much and sorry for my english. english is not my mother language. :-)

Notes on trying out netcfg:
- install netcfg: pacman -S netcfg
- set up a profile file in /etc/networks.d (copy a file from /etc/networks.d/examples and edit it)
- add the name of the profile file to NETWORKS=() in /etc/rc.conf
- add '@net-profiles' to DAEMONS=() in /etc/rc.conf (put it after 'network', prefixed with '@' so you don't have to wait for the network just to log in)
- remove the name of your interface that you want netcfg to set up from INTERFACES=() in /etc/rc.conf (so it doesn't try to set it up twice)
- also turn off whatever other network configuration daemon, like wicd, you might have been using.
Last edited by sdolim (2010-02-06 21:52:25)

Just got new T530 with wrong wireless card. Which model of Intel 6300?

Hey all, been surfing the google god for a few days but can't seem to find a secure answer that makes me happy. Just got a new T530 model 2359 laptop for my new job. Other then one stuck pixel that refuses to go away im pretty happy with it as I upgraded the CPU to the i5 3320 cpu model with the nvidia NVS 5400m GPU so it can power dual 24" monitors on my new Lenovo dock.
What sucks is that my manager got me the wrong wifi card, the standard thinkpad 1x1 b/g/n wireless card so I can't connect to 5ghz and or dual band routers like I have at my home which I really want for reliable and fast wireless cause I will be using it a lot around my work building as I do IT support for users so I wanna be able to use all the antenna's to help my range.
I took the laptop apart and I do see a third wire not connected to the thinkpad 1x1 mini card so should be able to use 3 antenna's on my T530? My big question is which 6300 card would the correct one for my T530? I know apparently there are "white label" cards from IBM that don't work in certain machines but considering I'm putting it into a IBM, I would think I would be ok?
Also, I do have an HD webcam buit in and I've heard that apparently some Thinkpad models you can't use three antenna and have the webcam working?
I'm curious if this white label centrino 6300 is the one I need
http://www.amazon.com/Wireless-Ultimate-n-6300agn-802-11a-572511-001/dp/B008UOQVYC/ref=sr_1_1?s=elec...
Or is it this one?
http://www.amazon.com/Intel-6235AN-HMWWB-Centrino-Advanced-N-Bluetooth/dp/B007QXLIWI/ref=sr_1_3?s=el...
Thanks for any clarrification on this

@Fr0stTr0n...
You may wish to try the P/N that Z and Rich referenced here:
http://www-304.ibm.com/shop/americas/webapp/wcs/stores/servlet/default/PromotionDisplay?promoName=pa...
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Kernel panic with PCMCIA wireless cards.

UDEV throws a kernel panic when I insert either of two wireless PCMCIA wireless cards.
UDEV version 106 and the latest kernel 2.6.20. Both wireless cards worked just fine previously
so I'm sure it's a problem caused by upgrading.
Has anyone else experienced this problem with PCMCIA cards?
-A

Seems about rite but my system works foro some time and then at some random point freezes... guess it could be the same issue tho.
So its out of arch dev hands and needs a kernel update? Am i right to assume that next time kernel updates its the right time to try 20 series again?
Yeah im drunk, tried to check for typing tho ^^

Power Mac G3 Pismo with Airport wireless card in Mac OS X 10.4 won't connect to wireless network with newest Airport Extreme Base Station set at WPA Personal/WPA 2 Personal encryption.

My Power Book G3 Pismo with an Airport wireless card running Mac OS X 10.4.11 will not connect to my new Airport
Extreme Base Station using WPA Personal/WPA 2 Person encryption. The Airport firmware is version 9.52. From
posts I've read online at different places indicates the Airport card should support the WPA encryption. Perhaps the problem
is the Base Station is using a combination setting and the fault is in the base station?
Thanks for any suggestions

Perhaps an inexpensive usb wireless adapter would work as well?
This is probably the simplest way to get the G3 connected to the wireless network.
I'll have to read up on getting an express and using it as a wireless bridge as I am unfamiliar with the concept.
The new AirPort Extreme is broadcasting a wireless signal.
A new AirPort Express could be located close to the G3. The Express will pick up the wireless signal from the AirPort Extreme, then provide an Ethernet connection to the G3 though a short Ethernet cable.
This can work very well......IF.....you keep the G3 at a fixed location, since it will always be connected to the AriPort Express using an Ethernet cable.
I do have an old Linksys Wireless G router. I wonder if that would work?
In theory, yes. But it would have to use much older WEP "security", which is easily cracked in minutes using free tools available on the Internet. So, anyone who really wanted to get on the network could do so. It's an option, but not a very good one.

Upgrading wireless card problem

I have a laptop, S105-A4074.
Running Windows Xp media
I am trying to replace the Intel wireless card with an new intel WiFi Link 5300. I have loaded drivers from Intel.
The laptop identifies the card, loads drivers but gives error message that there was a problem and device won't function. The device manager indicates a code 10 error
Are there any other drivers or software that I am overlooking?

Just Google it. But, I liked this review of 6 different ones.
Mike

S230u Thinkpad Twist Intel Wireless Card Compatability?

Is there an official list as to what Wireless Cards will work with the Lenovo Twist. I know when they were sold you had two options of cards, and had to decide if you wanted the Intel which supported Miricast or the Broadcom version which supported 5Ghz. Intel Centrino Wireless-N 2230 & Bluetooth 4.0 (2x2 BGN & BT 4)Thinkpad a/b/g/n Wireless & Bluetooth 4.0 (2x2 ABGN & BT 4.0) Now there are Intel Cards out that support all of the above such as the Advanced-N 6235, but I can find no information if this or any other Intel cards will work with the Thinkpad Twist. Any info would be appreciated. Thanks.

There was an interesting post on Amazon about wireless cards for the Twist. I'm going to try to upgrade from my Broadcom to an "Intel WiFi part 2230BNHMW chip with "FRU P/N 04W3765" written right on the face of the card" on my 3-year-old Twist, based on the poster's info: "Some Twists come with WiDi support and some don't. Mine didn't. It had the newest dual band (2.4 and 5 g) WiFi card that doesn't support WiDi because it isn't made by Intel. Lenovo did this all to save a couple of bucks. So I brought a WiFi card that did support WiDi and Lenovo had whitelisted the card and I had to return it to get a single band, "Lenovo certified", Intel chip. It would have been nice if Lenovo stated that it didn't have the correct WiFi card for WiDi. You will need the Intel WiFi part 2230BNHMW chip with "FRU P/N 04W3765" written right on the face of the card - the 04W3765 is the Lenovo part number. This is the only chip that will get past Lenovo whitelisting that will make WiDi work. Using the new Intel Wifi card had no impact the Twist's WiFi performance at my house. When I installed the WiFi chip, I didn't have to update any drivers. The computer automatically did it upon booting. The chip was very easy to install and if you go to the Lenovo Twist support website the manual shows you exactly how to do it. However, I did have to update the Audio driver using the Lenovo driver website. This is important because I updated all of the drivers using the Lenovo website when I got the computer. However, the Lenovo website failed to update the audio drivers. So when I first used the WiDi I had no sound. It was very easy to update but you will likely need to update the audio drivers separately should you do what I did. Once I installed the WiDi software for Windows 8 (from the Lenovo Website) and added the Neatgear Push2TV 3000 to my TV, it worked like a charm (I also updated the software on the Push2TV 3000 - PTV3000 that I purchased from Amazon. However, I don't think that this was critical)."

Tip: Temp work around for Intel 7260 wireless card problems

I am currently having lot of issues with the Intel 7260 wireless card relating to unstable network connections (i.e. limited or no network connections, frequent dropouts). These problems are quite widespread, so it is not limited to Lenovo branded machines, many other brand of laptops are also having similar problem. This workaround is temporary until the laptop company and intel provides an official fix.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Step 1. Go into your control panel -> System Security -> System
Step 2. Click on Device Manager on the left hand side of the window.
Step 3. Click on Network Adapters
Step 4. Right click on Intel Wireless 7260, and click on properties
Step 5. Click on Advanced Tab
Step 6. Click on HT Mode and then select disable as an option.
Disabling the HT mode means you are operating the wireless card in G mode (54 mbps), for some people this is too slow, but it is an acceptable short term solution for preventing frequent network connection dropouts.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Lenovo g570 and wireless card problems

Ello folks,
I recently bought a Lenovo g570 Notebook, started using it all went fine recently i even upgraded my windows 7 to windows 8 x 64 and everything was swell. At some point my wireless connection was working fine but then BAM my wireless connection dissappeared from the list of connections. I must say that i had the same problem with the previous windows 7. Figured that the broadcast from the router was the problem but it turned out it wasn't sooo i'm assuming it's some kind of setting from the laptop because all other wireless using tech from home can see that particular network, all except the lenovo notebook.
Any help would be appreciated. I must say that i recently updated every driver to the latest after deinstalling the previous ones, without any result..... It's driving me nuts ....

hi mikydutza34,
Welcome to the Lenovo Forums.
If you upgraded to WIndows 8 Pro, check these article as it's similar to your problem.
Wireless unable to switch on in Windows 8
Wireless card enabled but not connected after Win 8 Pro was installed
Let me know your findings,
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Wireless Card Problems after Upgrade

Hi,
Just updated to new kernel and udev... got everything running back to normal without much problems cept my wireless card.
I got a cardbus card so I have to use ndiswrapper to load it.. but if I boot up with the card in, the computer freezes at the network module. It will boot up without the wireless card inserted.. but once I login and insert it it freezes up.
I've tried rmmod ndiswrapper module but that freezes up the comp too..
Anyone have any suggestions???

As I understand it my laptop has been fine and it uses broadcom-wl, and I just re-yaourt it each time my kernel version changes using a cable in my router. But I believe there is something called dkms and a version of the driver for it, which (I haven't read fully into it) is something like a separate tree, which can (from what little I've read) eliminate this need to recompile every time, however I literally read this 5 minutes ago, from the AUR page for broadcom-wl and a quick google so I wouldn't be surprised if there is more to it than that.

Wireless Card Problem

Following the info found in this forum, I've been trying to use a Netgear WG511T wireless card on my Powerbook G3 OS 10.2. I downloaded and installed the Orangeware driver, but after inserting the card (the light on the card blinks) the computer freezes during reboot and I get a grey screen with lines across the screen. This driver is supposed to work with this card, but I haven't been able to get past the reboot stage. Everything works fine without the card inserted. Am I missing something? Are the Mac gods playing with my mind? I really want this to work.

Hello,
cmlle, I have exactly the same problem.
For months I have been using Orangeware wireless driver on my Pismo G3/400 OSX 10.4 in combination with Netgear WG511T card with no problems at all.
Suddenly one day a black square appeared on the grey background when booting my Pismo. I red that is something to do with Kernel Panic but I don’t know much about that.
So it took several rebooting until Pismo appeared to be OK. But then a few times the screen just went black. That eventually stopped but instead Pismo would just freeze.
I then discovered that if I take my Netgear card out my Pismo, it unfreezes and start to work normally. If I then try to insert the card again while the computer is on the card wouldn’t connect with my router but only one LED would flash.
I eventually reinstalled OS but to no avail. I am so puzzled.
I would be ever so grateful if somebody could make a logical sense of all these symptoms.
Many thanks again
Alex

Please! Help me with my SIM card problem!

When I first bought the Blackberry Flip 8220, I was constantly having a problem with my SIM card and the signals. My signal would constantly drop down to none and would go into SOS mode. Not only that, but it would also say either "SIM Card Error,""Invalid SIM Card," or "Insert SIM Card." So, the RIM sent me a new replacement for the cellphone. For the first few days, it worked just fine but, as the time passed by, the phone started to have the similar problem. What's worse is that as the time passed, the more problem started to show up! Now, my side buttons aren't functioning and the rate of my phone experiencing the problem with the SIM card and the signals, similar to the ones mentions above, has risen drastically. For now, the side buttons aren't my priority but what I would like to find out is how come my phone is experiencing such problem with the SIM card and how I can fix it. Please, help me! Due to this problem, I can't even receive the international calls.

Hi and Welcome to the Forums!
I don't believe that RIM issues SIMs...the carriers issue the SIM cards since these activate your phone on their network. RIM doesn't care what network you use...but the carriers do
So, what I'd suggest is that you go see your carrier and find out what's going on with the bad SIM. It is also possible that the device itself has a problem with the SIM card contacts...in which case the advice is the same, your carrier provides your service, so going to see them is the right thing to do.
Good luck and let us know how it goes!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

T41 Thinkpad with Anatel wireless card problem

Similar Messages

Maybe you are looking for