T410 and W510 Intel 82577LM driver is not compatible with Symantec Ghost Deploy Anywhere
Hi,
I have major problem with latest Intel 82577LM driver.
Im using ghost to image new pcs and ghost uses program called deploy anywhere to install missing drivers to image file. I can add driver to deploy anywhere driver database without errors but when i try to install driver it do not find it.
This is the driver im using http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-74426
anyone else using Deploy anywhere with new Lenovo models? Do you have same problem?
Solved!
Go to Solution.
Ok. i found solution.
Its here https://www-secure.symantec.com/connect/forums/deploy-anywhere-fails-lenovo-t410-and-lenovo-w510#com...
Similar Messages
-
Hi
Since my update I am getting the following message in my console:
11-07-22 3:27:45.000 PM kernel: AVVideoCard::probe: This driver is not compatible with model <MacBookPro5,5> when running kernel version 11.0.0. Loading will abort.
Anyone know what this means and the solution?
Thank youMe too. The specific message on my 13' MBP is:
12/5/11 11:06:32.539 AM usbmuxd: _AMDeviceConnectByAddressAndPort (thread 0x100781000): IPv4
12/5/11 11:06:33.000 AM kernel: AVVideoCard::probe()
12/5/11 11:06:33.000 AM kernel: AVVideoCard::probe: This driver is not compatible with model <MacBookPro5,5> when running kernel version 11.2.0. Loading will abort. -
I have an ipad (IOS 7.1) and downloaded latest version of itunes (11.1.5.5) and downloaded itools (1.8.2.8) but my Itools does not work and message that your itools is not compatible with itunes so please want your comment for that.
Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H. -
the security module of these banks: "Banco do Brasil", "Santander" and "Caixa Econômica Federal" are not compatibles with firefox 4.0
the security module of these banks: "Banco do Brasil", "Santander" and "Caixa Econômica Federal" are not compatibles with firefox 4.0
-
have lion 10.7.4 up graded from tiger 10.5.8. tried to download mountain lion but received a message that mountain lion is not compatible with my computer. anyone have this problem or suggestion?
It's actually not the chip... it's the drivers for the video card. this is what my friend who does IT work said.
"The drivers for your Mac's video card are not 64bit compatible even though the computer itself is. Mountain Lion has done away with all 32bit OS components so it only runs on full 64bit MAcs now"
So even though I updated my video card to a newer version and my computer itself is 64bit... apple didn't create a driver for it that was 64 bit. My hardware is fine for this update and the chip can handle it. It can handle all my 64 bit programs just fine. It's apple forcing me to update and buy a new expensive computer. So much for long lasting computer... they last long but they won't be supported very long.
Why not release a version of mountain lion that supports 32 bit graphics alongside the 64 bit? Wasn't that what grand central was going to accomplish? This is rubbish. -
Audio driver download not compatible with hardware
Pavilion dv6 1280-us - windows 7 64 bit reinstall - downloaded audio drivers from HP support site, but error message says hardware detected is not compatible with the software and install is cancelled. Where do I go from here?
The first step would be to verify that you downloaded the correct version of the driver. You should have seen an option for both the 32-bit and the 64-bit versions. I would verify that you downloaded the 64-bit version.
You can also check the manufacturer's website for your audio device. They may have an updated version of the driver that they have not gotten to HP yet. -
15.5.6000.1657/15.5.6.48 Intel Wireless Driver - DO NOT INSTALL with Windows 8
As the title says
15.5.6000.1657/15.5.6.48 Intel Wireless driver dated 29/Jan
Don't install it - it borked my 6300 AGN had to rollback.
DangerMouse
Current Machines : T420s/W530/X1CTProblem Solved.
This link gives a good insight into the solution
http://www.sadjad.net/blog/2012/11/28/windows-8-shared-printer-driver/ -
I recently recorded something on my friends laptop using his Garageband. But then I was trying to transfer it to my computer and it says I need to update to 6.0.5 to be able to open the file. However when I try and update it it gives me this message "The version of GarageBand installed on this Mac must be updated through the Mac App Store. Check the Mac App Store to see if an update is available." So I went to App Store to update it but the only garageband related thing I could find there was the 10.0.2 update which was too big an update and wouldn't run with my OS anyway. How do I get the 6.0.5 update? Whould I delete Garageband and reinstall using the 6.0.5? Also my OS is 10.7.5 if that helps.
Whould I delete Garageband and reinstall using the 6.0.5? Also my OS is 10.7.5 if that helps.
That will not work. The GarageBand 6.0.5 updater from the Apple Support page is not a full installer. You will need an installer disk for GarageBand '11, for example the boxed iLife '11 disk to install a GarageBand '11 version, that can be updated with that 6.0.5 updater.
So I went to App Store to update it but the only garageband related thing I could find there was the 10.0.2 update
The AppStore should not be showing you the 10.0.2 udpdate, if your system is not compatible. Or have you upgraded to MacOS 10.9.2? -
Hello i need help, i unloaded the new version of whatsapp and now is not working because my phone is not compatible, i delete it, and now i can not unloaded it again ! how can i unload the old version again ? thanks
If you did not make a backup of the old version of the app before you deleted it, there's no way you can get it back now. The current version should still work on your iPhone 3GS, though. You just need iOS 4.3 or later, so if your iPhone still has an older version, update to the latest iOS.
If, however, you really have an iPhone 3G, not a 3GS, then unless again you make a backup copy of the old version of the app, there's nothing you can do until you're ready to get a newer iPhone since iOS 4.2.1 is the final version your iPhone 3G will run.
This question, by the way, would have better been posted in the Using iPhone forum rather than here in the QuickTime forum.
Regards. -
I'm in an area where I can only use dial up.Right now, I use Firefox version 3.6 and have no problems with SlipStream. SlipStream is an accelerator for dial up.I want to update to 8.0.1,but it doesn't appear to be compatible with SlipStream. My local tech support (Pennswoods) doesn't think it's compatible. The existing plugin doesn't work. Any ideas what I can use? Thank you for any info. (I'm not real great with computers)
Sorry, you are stuck with whatever version of Slipstream that your ISP has available. They should know which versions of Firefox are supported by their accelerator plugin, because your ISP is more than likely paying Slipstream for every update that is necessary. <br />
Have you asked your ISP which versions of Firefox are supported by their accelerator plugin?
Beyond that, the only thing that I can suggest is to see if the [https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ Addon Compatibility Reporter] extension forces that accelerator plugin work in Firefox 8, with the compatibility override. But, if that plugin hasn't been updated for a Firefox 4+ version at all, I doubt if it will work even with the ACR addon. -
Printer driver is not compatible with Vista
The software with my hp psc 1210 printer is incompatable with my new laptop with a Vista operating system. Loading this screws up my laptop shut down! How can I find a driver to download which suits Vista?
and why you post this here in forum for Toshiba notebook if your printer is not even a Toshiba product?
The driver for printer should be requested from the printer manufacturer and not from notebook/computer manufacturer.
I assume this is an older printer and the drivers were compatible only with Win XP and older.
So contact the printer manufacturer to get the drivers for Vista or Win 7
PS: How about these driver:
http://drivers.softpedia.com/get/SCANNER-Digital-CAMERA-WEBCAM/HP/Hp-psc-1210-allinone-210.shtml -
I use G4 MacIntosh, System 10.5.8. I keep getting pop-ups asking me to upgrade my version of Firefox. But when I try to install I get the message that Firefox cannot operate with my computers architecture. How can I stop the pop-ups?
I believe Firefox 4 is Intel only. That means it will not install on a PPC Mac. You can get TenFourFox, which is made for PPCs.
http://www.floodgap.com/software/tenfourfox/ -
What is max internal hard drive transfer rate compatible with a 2007 MacBook Pro?
In attempt to upgrade my mid-2007 MacBook Pro (Intel Core 2 Duo), I bought a Seagate 750GB listed as compatible with my computer on MacSales.com . . .
Seagate Momentus XT ST750LX003 750GB 7200 RPM 32MB Cache 2.5" SATA 6.0Gb/s Solid State Hybrid Drive -Bare Drive
Installation appeared to go well and I ran an extended hardware test with no issues found. However, the drive is listed at 5.46 TB (would be nice) and I get an input/output error when attempting to partition. I can initiate an erase, but after the time I would suspect it would take to erase the drive, I get an input/output error - it seems to appear after the first 750 GB of the '5.5 TB' was erased. At all times, the drive is not recognized when I attempt to install OS X from original discs.
I suspect the 6.0 GB/s transfer capacity of the hard drive is not compatible with the MacBook Pro. The drive came with 4 jumper pins but no jumper and no label diagram to set a slower transfer rate. I called Seagate, Newegg, OWC, and Apple, but no one has compatibility info for my MacBook Pro. To them, it appears I am running the first tests of this new technology with an 'older' MacBook Pro.
My MBP has had no issues - I'd like to keep her going with the optimum internal hard drive capacity, but don't necessarily want to set up a test bench in my house (though my kids would enjoy destroying it) and pay several shipping and restocking fees to test new hard drives.
The original drive had a 1.5 GB/s transfer rate. Does anyone know the maximum transfer rate compatible with a 2007 MacBook Pro? 3.0 GB/s? 1.5 GB/s? Thank you.No spinning hard drive will transfer data faster then 60-80MB a second. The XT models have a flash storage area that is used when reading and writing data that can make it Appear faster in some situations. That flash memory if only 8 or 16GBs in side, I forget which one.
The drie is rated to work on 6GB SATA bus but it certainly can not transfer data that fast. It should be backword compatible to work on slower buses.
Your drive is 750GBs in size. Not wure where you are getting this 5.5TB (that is 5.5 Tera Bytes which is 5500 Giga Bytes. Your drive is under 1TB)
What are you using to partition the drive? Disk Utilities from the original install DVD?
You need to install on your old drive, Update it from the Apple Website then clone it to the new drive. The version of OSX you are using may not function correctly with that large of a drive. Or get yourself a copy of Snow Leopard, retail disk for $29 from Apple, and do all the partitioning and installing with that version od OSX. -
HP DVD1260I not compatible with windows 8.1
Recently i bought HP DVD1260I dvd burner, it works fine at first. I have windows 8.1 PC, recently I noticed my Dvd drive is not shown in windows explorer as well as in device mananger, but the dvd drive is shown in BIOS. To check my dvd is working or not, i have booted with linux cd, it works fine. Now, it shows that the dvd drive is not compatible with windows 8.1 (recent updates may cause this issue). Could anybody help?
Hi Jero,
Welcome to the HP Forum!
There are some issues with the upgrade - even if your system came with Windows 8.1, there are a bunch of HP products that are not updated yet for the new 8.1 environment. It is a pain, but the truth is that some things take more time than others. I do not work for HP, by the way, this is just my personal opinion.
Disclaimer: I am not running Windows 8.1 at this writing; I have some issues with the way in which 8.1 will treat some of my favorite setups... I am not ready to commit to the discomfort. Smiling.
You do have to be on the latest SimplePass to have a chance at all for this to work.
It appears that you are aware of the native Windows 8.1 fingerpring login service - this is a good thing.
I do not know personally if the fingerprinter, native or not, will work with that new "feature" of Windows 8.1 that wants us all to log in with our Microsoft password.
I did find a fix for Windows Live Login: Quick Tip: Change to a local account in Windows 8.1
If you can get your system set back to a local login and then make sure you are running the latest HP Simplepass, things may fall into place.
Latest HP SimplePass (at writing) is linked in the following file:
SkyDrive >> look for and open the file named:
Simple Instructions to Upgrade HP SimplePass
I hope something here helps!
Click the Kudos Star!
It is a great “Thank You” for the HP Experts who are here to help!
Kind Regards,
Dragon-Fur -
Seagate/Maxtor not compatible with TimeMachine
The Seagate/Maxtor OneTouch III hard drives are not compatible with Leopard's TimeMachine. The drives have a built-in sleep timer that puts them into a non-recoverable sleep after a certain amount of time. I was told by the Seagate/Maxtor Customer support that this setting could be changed with provided SW but only on non-Leopard machines. Otherwise, their only solution is to keep Mac from ever going to sleep or to disconnect all cables from the drive before the Mac is put to sleep or turned off.
If the drive goest to sleep (Mac will pop a warning that a "device was unmounted improperly) the only way to start it is to turn off the drive, pull the DC connector out, unplug the firewire connector (a must!) and then reconnect everything and turn on the power switch.
They refuse to warn the buyers through a sticker on a box, etc. They also refuse to fix their product or refund the money.
Other Seagate/Maxtor drives may have similar problems.Yep! I own the OneTouch III Turbo. It has two 500Gb drives inside and a hardware RAID controller to select between RAID-0 striped drives vs. RAID-1 mirrored drives. I've noticed that the utility to control the drive's RAID configuration (among other things) will launch, but not work correctly, under Leopard.
I phoned them waaaay back when and they didn't know what the problem was. Now they've figured out that their software doesn't work under Leopard, posted a message to their support forums to the effect, and claim their "working on it". It's been 3 months.... not a peep out of them.
They act as though Leopard just came out so they couldn't possibly be expected to have this working. Apparently they are unaware of the Apple Developer Connection which anyone can join and allows early access to software... even Leopard. ADC members had Leopard builds ages ago. Apparently Seagate/Maxtor chose not to take advantage.
It is not ok for a backup solution vendor to not support major OS upgrades that we all saw coming more than a year back. Nor respond to it when it arrives, nor post any information for customers who only just bought the drive and don't know why it wont work. We're all in the dark.
I've learned through this experience and realize now that Seagate/Maxtor cannot be relied upon. I'll be buying my drives from someone else from now on.
Message was edited by: Tim Campbell1
Maybe you are looking for
-
Function module MD_SALES_ORDER_STATUS_REPORT
Hello, When we execute the order report for production order or sales order, the function module that is used is MD_SALES_ORDER_STATUS_REPORT but what about Planned independent requirements ? Is it the same function module or is it different please?
-
Hi. For the last three days I have been trying to update my apps on my iPhone 4S but my phone won't allow me to. When I go to the app store and click the upsate all botton it does nothing. Same when I click on a single app. My phone is on the latest
-
Hello All, I have implemented a logic for field MATNR at the header level in the message mapping. Logic is when the value is not coming for a field it throws a customized exception.And the same field has different logic in the mapping under header. A
-
Strange thing happening when docking my iPod
I recently lost my iPod docking cable and found a replacement at a near by store. It was a nifty little package that came with several other USB adapters to connect your USB devices including an iPod adapter. I know the iPod is connected because it's
-
Most Visited drop-down lists mostly one-time visit web pages, and includes unrecognizable pages. Does not show pages I visit several times during the day.