T410: BlueScreen error upon waking up from sleep mode

Hi guys,
Bought a T410 earlier this month with an i5 processor, 4GB RAM, 500GB 7200rpm HD, 9-cell, etc etc.
The laptop has been running generally great. I have noticed, however, that sometimes, upon trying to wake up from sleep mode/hibernation (after leaving the laptop dormant for 20 or so minutes), the computer will be turned off completely.
When I hit the power button, I see a screen that says Windows failed to shut down properly. Then, when I reboot, I get the following BlueScreen message:
Problem signature:
Problem Event Name:   BlueScreen
OS Version:   6.1.7600.2.0.0.256.48
Locale ID:   1033
Additional information about the problem:
BCCode:   9f
BCP1:   0000000000000003
BCP2:   FFFFFA800492AA20
BCP3:   FFFFF80000B9C518
BCP4:   FFFFFA8009DF1010
OS Version:   6_1_7600
Service Pack:   0_0
Product:   256_1
Files that help describe the problem:
C:\Windows\Minidump\062610-28392-01.dmp
C:\Users\Justin\AppData\Local\Temp\WER-47689-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Also, when I reboot, I usually have to reconfigure my wireless configuration to access the internet. Any ideas on what might be causing this problem? Is this a question for Microsoft?
Thanks in advance for your replies.
Best,
Justin

You can forcibly power off by holding down the Power Button for a few seconds.
Try uninstalling most of the ThinkVantage tools and drivers, then use TVSU or manually redriver everything. It is possible some driver was corrupted somehow.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Similar Messages

IMac hangs waking up from sleep mode, what can I do?

I have an iMac - early 2008, Inter Core 2 Duo, screenshots of full specs attached below.
I upgraded to Mountain Lion about 3 weeks ago. No problem until 2-3 days ago when the iMac started to 'hang' after waking up from sleep mode.
I'd try to launch Safari but the icon just bounces on the dock.
Force quitting all open apps, force quitting Finder. Still nothing.
Can't shut down unless I hold the power button down.
Then on restart it says something about an application that was previously unresponsive...try to reopen it or wait 50 seconds (or thereabouts) - I choose the latter option.
I've tried to do the usual verify/repair permissions and verify/repair disk. No problem found.
Incidentally, this has only been happening since 'upgrading' to iTunes 11. Coincidence?
Can someone help?

Ok, I've done everything suggested above except for running the Disk Utility from the recovery partition, as I will have more time to spend on it tomorrow and that's something I'm too scared to try in a rush....!
I've made a screenshot of the energy saving settings changed to your suggestion, could you let me know if that's what you meant?
I really appreciate your help by the way

Compaq C700 - CPU fan not running after waking up from Sleep mode

Hi guys,
Waking up from Sleep mode does not start the CPU fan.
Kernel: 2.6.32-ARCH
KDE : 4.4
Let me know what other details you need.

I was having the same problem after installing mountain lion.
What i did was in Finder went to /Library/Preferences/SystemConfiguration/ and deleted all the networking plists (refer screen shot). Then restarted the Mac and in Network Preferences reconnected to my WLAN.
That solved the problem.

W510 eSATA/USB2.0 combo port does not respond after waking up from sleep mode

Has anyone tried to connect external DVD/CD player or burner to the eSATA/USB combo port and experienced very slow system performance after waking up from sleep mode? It might takes minutes to launch an application program that usually takes just few seconds. My W510 can not even restart. It will just stop at the Thinkpad logo if I tried to restart after waking up from sleep.
The funny thing is if I moved the external DVD/CD player to the USB2.0 port in the back, everything went back to normal. I don't know if this has anything to do with the fact that the combo port has something to do with eSATA.
Thanks

It seems that this problem is unique to my system. I am hoping that one of the Mac Guru's will have at least a pointer in the right direction.
Thanks.

OSX 10.9.1 macbook pro 13 retina - wifi does not reconnect automatically when waking up from sleep mode since I have a Bluetooth apple magicmouse

Hello,
My config is OSX 10.9.1 new macbook pro 13 retina (2014).
The wifi does not reconnect automatically when waking up from sleep mode since I have a Bluetooth apple magicmouse.
It was not the case before I bought the BT mouse.
Is this problem between Wifi and bluetooth coming from the OS?
Is there a fix already available or scheduled?
Thanks

Hello alexandrefromfrance
Check the Symptom: The network connection drops unexpectedly section for steps on what to do when your MacBook Pro does not connect after waking from sleep. I have also quoted the section on troubleshooting the issue as well.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
After waking from sleep or starting up, your computer may not show that it is connected to a Wi-Fi network.
After start or wake, your computer may indicate that it is connected to a network, but does not connect to the Internet.
Solution
Use these steps if your computer does not automatically connect to your desired Wi-Fi network.
Check your TCP/IP settings in the Network pane of the System Preferences. Click the "Renew DHCP lease" button
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
Select Wi-Fi, then click the Advanced button in the lower-left hand corner of the screen.
Click the TCP/IP tab from the top of the screen.
Click the "Renew DHCP lease" button.
Select the Wi-Fi tab and view your Preferred Networks list.
Select each network and click the minus sign to remove those networks from your Preferred Networks list.
Click OK and close the Network preferences.
Remove your stored network passwords using the Keychain Access Utility.
Open Keychain Access from /Applications/Utilities. Your window will look like this:
Remove your AirPort network passwords from the login keychain: Select the "login" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
Remove your AirPort network passwords from the System keychain: Select the "System" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".  Note: The above steps will remove your Wi-Fi network passwords. If you do not know them, or if your network does not use passwords to restrict access, you should contact your network administrator.
Restart your computer.
Join your Wi-Fi network. You will need to enter your password for your network again if it requires one.
Regards,
-Norm G.

After snow upd - imac 24" c2d crashes when waking up from sleep mode

hi,
I´ve a imac 24" c2d and installed snow over working 10.5.8. everything was ok, but now if the mac is waked up from sleep, it crashes
here is the logfile:
Interval Since Last Panic Report: 3901 sec
Panics Since Last Report: 1
Anonymous UUID: BE4BB7BB-FF5F-4343-9806-47D7A9743D1A
Sat Aug 29 21:16:07 2009
panic(cpu 0 caller 0x226297): "thread_invoke: preemption_level 1, possible cause: blocking while holding a spinlock, or within interrupt context"@/SourceCache/xnu/xnu-1456.1.25/osfmk/kern/sched_prim.c:1471
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x5cb53918 : 0x21acfa (0x5ce650 0x5cb5394c 0x223156 0x0)
0x5cb53968 : 0x226297 (0x5864e8 0x1 0x5864a8 0x225e89)
0x5cb539e8 : 0x22699d (0x87f401c 0x87f401c 0x5cb53a48 0x232085)
0x5cb53a58 : 0x226a2b (0x0 0x0 0x0 0x21910a)
0x5cb53a78 : 0x29c008 (0x0 0x0 0x5cb53acc 0x1)
0x5cb53b08 : 0x32e160 (0x7f5d150 0x95d7900 0x4a997e49 0x3121c3)
0x5cb53b38 : 0x34911c (0x100a8c0 0x8162c04 0x5cb53be8 0x2345ba)
0x5cb53cb8 : 0x357d77 (0x587d9f00 0x0 0x0 0x5cb53d10)
0x5cb53d48 : 0x4aeb5f (0x961a660 0x0 0x587d9f00 0x5cb53e44)
0x5cb53e08 : 0x4b4eea (0x961a660 0x5cb53e44 0x84aaa00 0x587d9f00)
0x5cb53ee8 : 0x4b52ff (0x84aaa00 0x0 0x87d81b4 0x39)
0x5cb53f78 : 0x4ed85f (0x8259d20 0x84d6b48 0x87d81b4 0x2270aa)
0x5cb53fc8 : 0x29d3fd (0x84d6b44 0x1 0x10 0x81ed9e4)
BSD process name corresponding to current thread: mDNSResponder
Mac OS version:
10A432
Kernel version:
Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT 2009; root:xnu-1456.1.25~1/RELEASE_I386
System model name: iMac7,1 (Mac-F42386C8)
System uptime in nanoseconds: 52473064073
unloaded kexts:
(none)
loaded kexts:
com.parallels.kext.prl_vnic 4.0 3844.409800 - last loaded 24033197772
com.parallels.kext.prl_netbridge 4.0 3844.409800
com.parallels.kext.prlusbconnect 4.0 3844.409800
com.parallels.kext.prlhidhook 4.0 3844.409800
com.parallels.kext.prl_hypervisor 4.0 3844.409800
com.markspace.iokit.IOMissingSyncMassStorage 199
at.obdev.nke.LittleSnitch 2.1.05
com.apple.driver.InternalModemSupport 2.6.0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleHWSensor 1.9.2d0
com.apple.driver.AppleHDA 1.7.4a1
com.apple.driver.AppleUpstreamUserClient 3.0.5
com.apple.driver.AppleTyMCEDriver 1.0.1d8
com.apple.kext.ATIFramebuffer 6.0.0
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.0
com.apple.driver.AppleIRController 161
com.apple.driver.AppleIntelYonahProfile 14
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPISMCPlatformPlugin 3.4.0a20
com.apple.driver.AppleGraphicsControl 2.8.16
com.apple.driver.AppleBacklight 170.0.2
com.apple.driver.AppleLPC 1.4.6
com.apple.ATIRadeonX2000 6.0.0
com.apple.driver.AppleHIDKeyboard 1.1.5f1
com.apple.driver.CSRHIDTransitionDriver 2.2f18
com.apple.iokit.SCSITaskUserClient 2.5.0
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.5.0
com.apple.driver.AppleUSBHub 3.7.8
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleAHCIPort 2.0.0
com.apple.driver.AppleIntelPIIXATA 2.5.0
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.driver.AirPortBrcm43xx 410.91.20
com.apple.driver.AppleFWOHCI 4.3.4
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleUSBUHCI 3.7.5
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 90.0.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.0.11
com.apple.driver.AppleIntelCPUPowerManagement 90.0.0
com.apple.driver.AppleHDAPlatformDriver 1.7.4a1
com.apple.driver.AppleHDAHardwareConfigDriver 1.7.4a1
com.apple.driver.DspFuncLib 1.7.4a1
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOBluetoothSerialManager 2.2f18
com.apple.iokit.IOSerialFamily 10.0.2
com.apple.iokit.IOAudioFamily 1.7.0fc16
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.7.4a1
com.apple.iokit.IOHDAFamily 1.7.4a1
com.apple.iokit.AppleProfileFamily 40
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 3.4.0a20
com.apple.iokit.IONDRVSupport 2.0
com.apple.kext.ATI2600Controller 6.0.0
com.apple.kext.ATISupport 6.0.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.driver.CSRUSBBluetoothHCIController 2.2f18
com.apple.driver.AppleUSBBluetoothHCIController 2.2f18
com.apple.iokit.IOBluetoothFamily 2.2f18
com.apple.driver.AppleUSBHIDMouse 1.3.0f1
com.apple.driver.AppleHIDMouse 1.3.0f1
com.apple.iokit.IOUSBHIDDriver 3.7.5
com.apple.driver.AppleUSBMergeNub 3.7.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.5.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOATAPIProtocolTransport 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.5.0
com.apple.iokit.IOUSBUserClient 3.7.5
com.apple.iokit.IOAHCIFamily 2.0.0
com.apple.iokit.IOATAFamily 2.5.0
com.apple.iokit.IO80211Family 300.20
com.apple.iokit.IONetworkingFamily 1.8
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOUSBFamily 3.7.8
com.apple.iokit.IOHIDFamily 1.6.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: iMac7,1, BootROM IM71.007A.B03, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.21f4
Graphics: ATI Radeon HD 2600 Pro, ATI,RadeonHD2600, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.91.19)
Bluetooth: Version 2.2.0f18, 2 service, 0 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: Parallels Shared Networking Adapter, Ethernet, en4
Network Service: Parallels Host-Only Networking Adapter, Ethernet, en5
Serial ATA Device: WDC WD5000AAKS-40YGA0, 465,76 GB
Parallel ATA Device: MATSHITADVD-R UJ-875
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1005, 0xfd100000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd130000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x021e, 0xfd120000
USB Device: Hub, 0x0409 (NEC Corporation), 0x005a, 0xfa400000
USB Device: Cinergy T², 0x0ccd, 0x0038, 0xfa430000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8206, 0x1a100000

I'm having the same problem with a Black Macbook C2D 2.4Ghz. Installed Snow Leopard over 10.5.8 and whenever the computer sleeps, it completely hangs on wake. I've installed the system twice and the behavior is the same. Tried pulling each of the RAM sticks. No difference. Anybody else?

Screen remains blacks even after waking up from Sleep mode

Hi,
I've had my Macbook Pro for over a year now and it hasn't given me any problems until recently. The screen would remain black when I open up the laptop to wake it up from sleep mode. There would be no response even when I press random keys. When I close the laptop again, the white light at the bottom right corner lights on (when it's supposed to "breathe" while sleeping). The light goes out when I open up the laptop. The only thing I could do is to restart the computer.
What is the problem? Are there any ways to rectify this?

I am going to add my problem to this as I believe it fits and may add to the conversation.
I have a MacBook Pro, am using Parallels, and have an issue waking it up from sleep.
Circumstances:
I close the lid and walk away from the device in my office. When I return, (over night or an hour later) I open the lid, and if nothing happens swipe the touchpad or press a key, the power light changes from pulsating to steady. then in less than 15 seconds it goes back to pusating. The display never energizes, only remain black.
I usually try opening and closing several times, and occaisionally that will work. Other times, I hold the power key until I hear the drive halt, then turn it on. The grey screen will display, then blue, then just before it gets to the log in, the screen goes black (not energized) and the light pulsates.
I have tried the PRAM reset and Safe Mode starts with no luck.
*Now the really wierd thing.* I decieded to contact Apple support on line and pay for help (yes that is weird in an of itself for me). As I began the process it came to the part for me to enter my serial number. With the lid open, I turned the MacBook on its side to try to read the number and the screen energized and the password unlock prompt was waiting for me to enter the password.
Observations
I had read where the light sensor could be blocked by dirt or the light in the room was too dim, but I clean the screen and there is plenty of light. Dales Post is the first that I have seen Parallels and the Sudden Motion Sensor. That makes some sense to me because of what happened when I turned it on its side. I have verified that it happens regardless of using Parallels. as teh last time I did it I had closed out of all my VMs and I believe exited Parallels.
I am going to try the deleting the power preferences file and will report back.

Weird noise coming from computer when 'waking up' from sleep mode

Hi everyone,
I recently upgraded to Yosemite 10.10.1 - specs are in the attached photo below.
Since yesterday, when I turn on my computer, or 'wake' it up from sleep mode, it makes a strange and noticeable whining noise. I've had the computer for around two months and it has never made such noises. The noise lasts for about 1-2 seconds. Aside from that the computer is operating as usual.
I reset/shut down the computer several times and also did a PRAM reset. I have no idea what the issue may be and can't seem to find anything of relevance in the community. Should I go to an Apple Store? Is there something to be fixed or will the computer need to be replaced?
Thank you all for your time!

SSDee wrote:
@Thor - I too like Acronis although one could use Windows Backup if so desired.
Sleep mode - I use sleep mode for scheduled recording of TV shows in Windows Media Center. If I shut down, no recording.
Yea, waking up to do a recording is certainly a valid scenario. I gave up on Windows Media Center right before they came out with an XBOX that is actually quiet and could be used as an extender. We've been a TiVo family since those noisy XBOX days.
Regarding sleep/hibernate, I just got tired of my machines waking in the Lenovo dock and having to reset application position, screen resolutions, and all of the other crap that seems to happen to ThinkPads on a resume. That doesn't even take into account the black screen of death or other reliability issues I've seen over the years.
I am firmly a shutdown guy now. It's clean and I know what I get when I press the power button again. With 15-25 second boots and fast I/O, the reliability outweighs the perceived time savings.
We haven't discussed what might be corrupting the original posters file system. That is disconcerting. Sounds like a Crucial M4 firmware issue. If that is the culprit, there's going to be hell to pay on the mSATA M4 based Ultrabooks assuming it has the same bug.

Satellite P200D-11R sound and graphics crash after waking up from sleep mode

Hi,
I am wondering if anyone here has had similar experiences to mine (below) or can offer any solutions.
I have upgraded my P200D-11R OS to Vista 64 Ultimate to take advantage of the extra performance. I also add that the BIOS has already been updated to version 1.4.
Well, everything works fine with the standard 2Gig of RAM which the laptop was supplied with originally, however, when I upgrade the RAM to 4Gig (2 x 2GB Samsung 667mHz modules), sound and graphics problems appear every time the machine is brought back from sleep mode.
The sound card makes a very laud fuzzy noise every time it wants to play a sound and the graphics produce lots of horizontal lines on the screen. I then just have to restart the machine which means loosing all my unsaved work.
Everything works fine as long as the machine does not enter sleep mode. I have currently disabled the sleep mode to prevent the machine from entering it but I am finding life very hard without it.
I am very surprised and also disappointed at the fact that Toshiba did not test these machines with Vista 64 Ultimate and 4Gig of RAM!
Extra info:
The memory is the same Samsung type as the 1Gig modules supplied by Toshiba originally with the machine, and the part number Toshiba recommends.
I have tried installing other (more recent) device drivers by Realtek and ATI without any improvements.
The memory modules pass all tests and are not defective. They have also been tested on my friends Dell notebook with no problems even in sleep mode.
I have installed my friends Dell 2Gig memory modules in my P200D and they too produce exactly the same results with post-sleep crashes.
My thoughts are that this must be another BIOS issue unless anyone can shed some light on the issue from another angle.
Please help! Many thanks in advance.

Hi Sascha
Since you are running a Vista 32bit version, the upper limit of the memory recocnised by the machine is 3.2gb which is the maximum a 32bit operating system can address and use. The diffrence here is that I also upgraded my OS to Vista Ultimate 64bit to get yet better performance out of the 64bit dual AMD processor.
3.2gb of RAM on 32bit OS does not necessarily increase the performance. However, it keeps the performance stable when you open many more programs at the same time since the machine has more RAM to play with before staring to use the much slower hard drive as operating memory (Page File), to keep all thoes open programs running.
A 64bit OS such as Vista Ultimate 64, recognises the whole 4gb of RAM and much more (for instance, 8gb with 2 x 4gb RAM modules). The 64bit OS itself would generally consume more RAM to start with, however, with 4gb I found the general performance to be much better. Going back to the problem however, my P200D-11R with Ultimate 64 and 4gb RAM refuses to wake up from sleep mode gracefully and the graphics and sound crash every time, forcing me to restart.
My feelings at present is that eventhough your machine may be slightly different, I bet if you upgrade your OS to 64bit, the machine will start recognising all of the 4gb of RAM and post-sleep crashes will start to appear!

How to stop the computer from changing its local network name when waking up from sleep mode

How do I prevent a mac mini from changing its' network name automatically when it wakes up from sleep mode... It will wake up and display a warning that the network name is already in use and it changes its name to (n+1) name with number after it... I know that there is no other device with that name because the only other things on the network are 2 hard drives (one being used for time capsule) and a printer..
This is very annoying and needs to be fixed.... don't tell me to make the computer never sleep because that defeats the power savings settings under power management.

Go to System Preferences>Network>AirPort and delete your network from the Preferred Networks box. Reenter your network information. Make sure that AirPort is the topmost listed interface when you Show Port Configurations. Apply the changes and Restart. Does it work now?

Can't use mouse/keyboard/trackpad when waking iMac from sleep mode

Basically as the title says. When I wake my iMac from sleep mode I am unable to use my keyboard/trackpad/mouse during the login window. Once the screen goes black by itself, after a minute or so I can then log in properly.
Yes the keyboard/mouse/trackpad are all connected when it wakes from sleep as I can use any of them to wake it from sleep, I just can't move them or type with them in the login window.
Processor 3.4 GHz Intel Core i7
Memory 24 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GTX 680MX 2048 MB
Software OS X 10.8.5 (12F37)

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Macbook connectivity lost after waking up from sleep mode or rebooting

Being an Ex-Microsoft user , I am sad to say that Microsoft products still beats Apple's MAC in stability for certain functions.
For instance, this Macbook laptop does not seem to be able to reconnect to the home's gateway/ router (or any other gateway, for the matter) after it wakes up from sleep mode or rebooting.
I've read several similar posts on this topic in the internet and am convince to say that it is not the gateway/ router that the Mac is connected to giving the problem as there are other computers(Microsoft-based) connected to the same gateway working perfectly fine.
Furthermore the Fujitsu laptop I was using previously had connected to the gateway flawlessly... until the darn-thing broke down (grumble....grumble...)
So far, it seemingly so, that no other person has managed to figure and resolve this one out yet. Also, no Apple support staff has responded nor helped resolved other related-connectivity problems.
Is there a real hope for us??

The previous solution only worked for a few days.
I have another fix from Apple that is working (for now):
Go to the network preference pane and create a new location by using the location pull-down menu. Call it whatever you want.
Select the new location. Choose the little tool icon dropdown under the left column of services and choose "set service order" Drag things around so that airport comes first and then ethernet. Save, apply, do what you need to do to save all of these settings. Restart the computer.
There might have been some other steps, but these are the main and most important parts.
The default configuration for service order is wrong and the computer gets hung looking around for a bluetooth or firewire network connection. After every major system update, check that the service order is set right--it could get overwritten.

TS3742 How do I resolve OS 10.8 kernal panics / crashes that occur most frequenly when waking up from sleep mode?

I get a lot of gray screens of death on my MacBook Pro ever since I went to OS 10.8. Never had issues with the 10.6 versions and now miss those days. The kernal panics seem to occur most frequently just waking it up from sleep, regardless of where i am or what is attached to it. I can't help but wonder if it is a problem with the video drivers under 10.8.x.
I get these daily, so here is the log that gets sent to Apple, but I'm not really sure anyone looks at them. Perhaps they would if other people experienced the problem too, but perhaps I'm in the vast minority.
Interval Since Last Panic Report: 39424 sec
Panics Since Last Report:          1
Anonymous UUID:                    350418C9-219F-2234-511F-6093210CA72E
Wed Jul 3 12:57:44 2013
panic(cpu 3 caller 0xffffff7fa122ef1a): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff81101ad000 0x0a5480a2, D0, P2/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.5/src/AppleM uxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 3), Frame : Return Address
0xffffff810fdc2ef0 : 0xffffff801f01d626
0xffffff810fdc2f60 : 0xffffff7fa122ef1a
0xffffff810fdc3030 : 0xffffff7f9f79cf1e
0xffffff810fdc30f0 : 0xffffff7f9f87112d
0xffffff810fdc3130 : 0xffffff7f9f87118e
0xffffff810fdc31a0 : 0xffffff7f9fb37ed0
0xffffff810fdc32d0 : 0xffffff7f9f899a75
0xffffff810fdc32f0 : 0xffffff7f9f7a3d50
0xffffff810fdc33a0 : 0xffffff7f9f7a17d0
0xffffff810fdc35a0 : 0xffffff7f9f7a310a
0xffffff810fdc3670 : 0xffffff7fa077e8be
0xffffff810fdc3730 : 0xffffff7fa07a9fa8
0xffffff810fdc37b0 : 0xffffff7fa07913e0
0xffffff810fdc3810 : 0xffffff7fa0791cc1
0xffffff810fdc3860 : 0xffffff7fa0792173
0xffffff810fdc38d0 : 0xffffff7fa07929d3
0xffffff810fdc3910 : 0xffffff7fa075de2f
0xffffff810fdc3a90 : 0xffffff7fa078ef0f
0xffffff810fdc3b50 : 0xffffff7fa075c8c8
0xffffff810fdc3ba0 : 0xffffff801f466e69
0xffffff810fdc3bc0 : 0xffffff801f468410
0xffffff810fdc3c20 : 0xffffff801f465e2f
0xffffff810fdc3d70 : 0xffffff801f098c01
0xffffff810fdc3e80 : 0xffffff801f020b3d
0xffffff810fdc3eb0 : 0xffffff801f010448
0xffffff810fdc3f00 : 0xffffff801f01961b
0xffffff810fdc3f70 : 0xffffff801f0a6536
0xffffff810fdc3fb0 : 0xffffff801f0ce9e3
      Kernel Extensions in backtrace:
         com.apple.driver.AppleMuxControl(3.4.5)[49FEF732-D7A3-327B-A7AA-6AC5A6E3DCFF]@0 xffffff7fa1221000->0xffffff7fa1233fff
            dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[1D0BB11E-7D71-34CF-ACC3-57DF01CADA 08]@0xffffff7fa121c000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9f6a5000
            dependency: com.apple.driver.AppleGraphicsControl(3.4.5)[4A2C8548-7EF1-38A9-8817-E8CB34B8DC A6]@0xffffff7fa1208000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[A35915E8-C1B0-3C0F-81DF-5515BC9002FC]@0xfffff f7f9f5e8000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f9f727000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f9f6e4000
         com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f9f7 3b000->0xffffff7f9f9e0fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9f6a5000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f9f727000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f9f6e4000
         com.apple.nvidia.nv50hal(8.1.2)[988EAF3A-3318-3787-8A5A-844830FA1522]@0xffffff7 f9f9ec000->0xffffff7f9fcc0fff
            dependency: com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f9f7 3b000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9f6a5000
         com.apple.GeForce(8.1.2)[7EC545A4-4B57-32F1-8DC3-C31023AFBDCB]@0xffffff7fa074a0 00->0xffffff7fa0817fff
            dependency: com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f9f7 3b000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f9f727000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9f6a5000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f9f6e4000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12E55
Kernel version:
Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
Kernel slide:     0x000000001ee00000
Kernel text base: 0xffffff801f000000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 39531702676383
last loaded kext at 25781655065123: com.apple.driver.AppleUSBCDC    4.1.23 (addr 0xffffff7fa13f3000, size 16384)
last unloaded kext at 25851680759110: com.apple.driver.StorageLynx    3.1.7 (addr 0xffffff7fa13e7000, size 8192)
loaded kext
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x029E, 0x434D5341344758334D314131303636433720
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x029E, 0x434D5341344758334D314131303636433720
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.17)
Bluetooth: Version 4.1.4f2 12041, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS725050A9A362, 500.11 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 8
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2504, 0xfd130000 / 5
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd133000 / 6
USB Device: Microsoft 5-Button Mouse with IntelliEye(TM), 0x045e (Microsoft Corporation), 0x0039, 0xfd133300 / 8
USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0xfd133200 / 7
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3
FireWire Device: OEM ATA Device 00, G-TECH, 800mbit_speed

Do you see things like described here: http://support.apple.com/kb/TS4088
If so, or even if they don't, you should take your MBP into an Apple Store or Apple Certified Service center along with a printout of that article. They will test it to see if it is that problem and replace the logic board for free up to three years from date of purchase. That time is likely close or already passed.

Hi, Lately many times my MBP15 shuts down a few second after waking up from sleep mode. Any ideas why? I think it happens everytime I try to open safari right away...

I think it happens everytime I try to open safari right away, but I'm not sure. After shutting down it automatically restarts and gives me a message Ÿour computer had to shut down because of a problem, press any key to restart..." and when it comes on again it gives me an option to send an error report to apple.
Any ideas?
Thanks

Yeah your Mac is having a Kernel Panic and the option to Restart the system when that happens is checked. So the system Restarts Automatically. Uncheck that option. For some unknown reason it is located in the Energy Saver applet in System Preferences.
As to the ROOT cause it could be software or hardware problems. There should be a Kernel Panic report in the console logs.
But if you do a search of these forum you'll find many that are having these restarts waking from sleep. So it would seem to be a hardware problem.

HP ZBook 15 freezes after waking up from Sleep Mode

I've got a brand new HP ZBook 15. It arrived with Windows 7 and a HP Windows 8 DVD. I installed windows 8 on it immediately using the DVD and installed all drivers with the HP Support Assistant. Apart from having a lot of problems with the Ethernet, which are now partially resolved, I've got a huge issue when putting the Laptop into sleep mode and waking it up after 1-2 hours. Everything will start normal, and I can see the start screen image (the image which appears before you log in with your PW or PIN), but it will then immediatly freeze. This can only be resolved with a restart. Sometimes, even after restarting, I will be able to log in normally, but the system freezes again after reaching the desktop. I've tried talking to HP Support but they just gave me some drivers to install (i.e downgrade my drivers) which did not resolve the issue. BIOS is L70 Ver. 01.07 Does anybody know how to resolve this?

Hi BananaCode, To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks.

T410: BlueScreen error upon waking up from sleep mode

Similar Messages

Maybe you are looking for