T410: From Graphics: Intel GMA HD Integrated Graphics to Graphics: NVIDIA NVS 3100M with 256MB DDR3

Hi, I have a Thinkpad T410. I bought it with integrated graphics card. Now i want to upgrade to the other one: Graphics: NVIDIA NVS 3100M with 256MB DDR3. Is that possible? thanks a lot

You'd have to replace the motherboard.
A better solution would probably be to get an eGPU; it's way way way faster.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Similar Messages

  • T510 w/ NVIDIA NVS 3100M -- Window 7 not recognizin​g discrete graphics card

    Hi --
    I just got a T510 w/ discrete graphics card, ie, the NVIDIA NVS 3100M w/ 512mb of dedicated video memory.
    However, when I look in "Performance Information and Tools" under the "View and print detailed performance and system information", I see the graphics as "Intel(R) HD Graphics". Under the "Graphics" section I see this:
    Graphics  
    Display adapter type
    NVIDIA NVS 3100M
    Total available graphics memory
    1696 MB
          Dedicated graphics memory
    64 MB
          Dedicated system memory
    0 MB
          Shared system memory
    1632 MB
    Display adapter driver version
    8.17.12.5738
    Primary monitor resolution
    1920x1080
    DirectX version
    DirectX 10
    This is a bit confusing, because now it says the adapter is NVIDIA, but the dedicated memory is only 64 MB. Seems odd as I should have 512MB?
    Thanks

    I'm fairly certain you can force Optimus to be discrete only or integrated onlyin the BIOS or in some of the Power Manager settings. Otherwise, you can try loading DirectX and seeing what dxdiag tells you about your graphics card.
    In addition, Lenovo's implementaiton of Optimus seems to allow you to run certain programs on the IGP and other programs on the discrete chip simultaneously, so it may simply be allocating the Windows benchmark thread to the IGP instead of the NV chip, thereby causing the flawed readings. Don't know exactly how one forces a process to run using the discrete GPU though.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • New T410 with NVIDIA NVS 3100m Optimus switchable graphics

    Does anyone know how to enable the switchable graphics feature on these machines.

    Hi ts4673!
    The beauty of Optimus is that switching occurs automatically. It is enabled by default, and automatically optimizes the choice of graphics processor, so you don't have to worry about managing the switchable graphics.
    If you want to temporarily override Optimus' choice for an application, right click on the application and choose (assuming the context menu is enabled). You can set your choice permanently using the Nvidia Control Panel.
    Hope this helps!
    I don't work for Lenovo. I'm a crazy volunteer!

  • Display problems with lenovo T410 with Nvidia NVS 3100M

    Hi,
    I am having terrible video display quality in my new T410 with Nvidia 3100M graphics card. While playing SD and HD videos, I get very poor display quality, shadows and broken pixels . I have taken these screen shots to show the issue. I have tried playing HD videos from players and online streaming from Vimeo, but all seem to have same issue.
    http://i.imgur.com/bCh95.jpg http://i.imgur.com/IUONm.jpg
    Nvidia Control Panel http://i.imgur.com/D04wc.png
    I can confirm that the quality of the videos is not flawed as I have played same videos on other non HD displays and they look much better. I also have up to date drivers for nvidia. I hope someone can help me improve the display quality of my laptop as it is a major inconvenience. The problem is mostly with video only as images are displayed much better.
    Thanks!

    What are you using to play the videos?
    Edit: Didn't read propely: "I have tried playing HD videos from players and online streaming from Vimeo, but all seem to have same issue."
    Have you tried VLC? Unlike alot of other players it takes care of the decoding itself. Other players might all use the same decoder.

  • NVIDIA NVS Graphic adapter support KVM-Intel AMT/vPro?

    Hi there,
    I have a Thinkpad T410, Intel core i7, Intel Centrino Advanced-N 6200 AGN and the NVIDIA NVS 3100m Graphic adapter, I asked to Intel and that adapter does not support KVM:
    http://software.intel.com/en-us/forums/showthread.php?t=78585&o=a&s=lr
    I need to use KVM and I cannot understand why if the Lenovo product review shows the NVIDIA adapter supports AMT why it acually does not support KVM, so it does not really support AMT (it's just a partial support):
    http://software.intel.com/en-us/forums/showthread.php?t=76173
    So, I'm forced to lose a good NVIDIA graphic card for an integrated one, the question is: can I change to Intel Graphics Media Accelerator 57000MHD-AMT? -it's a cheaper one-
    Help!
    Solved!
    Go to Solution.

    Hi javiercaceres!
    According to the Hardware Maintenance Manual, it's part of the system board, so the graphics adapter can't be swapped out.
    I don't work for Lenovo. I'm a crazy volunteer!

  • Help: MBP Using Intel GMA x3100 video

    After opening my MBP today to teach a class, the display was black as well as the projector I connected. I have used this projector many times with success. The display will not turn on now at all, even though everything else is working fine. My 20in cinema display doesn't work either, nor does booting into my Windows XP install.
    After resetting the SMC and the PRAM, with no changes, I was able to use Leopard Screen Sharing to manage my computer. The Apple System Profiler show the computer using the Intel GMA x3100 integrated video instead of the ATI card that came with my MBP.
    All signs point to the video card being dead, but I thought I would check here to see if anyone had any other ideas. Thanks in advance for the help.

    Thanks for that link. Although I hadn't read the article, I did try all of those steps. Unfortunately, when running the hardware test the screen doesn't work and screen sharing doesn't work either (being booted into whatever account the hardware test disk uses).
    At this point, it looks like either the firmware is messed up so that it isn't using the right graphics chipset, or the video card is actually dead. I am going to try the firmware reset CD [1] next. Wish me luck!
    [1] http://www.apple.com/support/downloads/firmwarerestorationcd13.html

  • [SOLVED] Thinkpad T510 - Intel Core i7 - Integrated Graphics

    Hi,
    i recent bought a ThinkPad T510 4349-2RG with an Intel Core i7 M 620 built-in. There is also an NVIDIA  NVS 3100.
    According to the Intel-Homepage, my CPU should have an integrated GPU (http://www.intel.com/products/processor … ations.htm).
    The NVIDIA card just works fine with the latest binary driver. But I would also like to use the integrated Intel GMA (Battery life) and/or bumblebee.
    The problem is that the Intel GMA dont get recognized by the kernel, but its also not visible in BIOS (normally there should be an option to select between "Intel integrated" "discrete" and "Optimus" - i've updated to the latest BIOS version 1.44). I double-checked this with a live CD of Ubuntu Linux 11.04 (also only NVIDIA).
    Is there any option to get this running?
    Output of dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 20110513 (prerelease) (GCC) ) #1 SMP PREEMPT Mon May 23 22:02:08 CEST 2011
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/c4fd4a58-2d4c-4805-be6e-ba2a6082d88e ro nologo fastboot quiet console=tty1 splash=silent,theme:arch-black,fadein
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
    [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf27c000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf27c000 - 00000000bf282000 (reserved)
    [ 0.000000] BIOS-e820: 00000000bf282000 - 00000000bf35f000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf35f000 - 00000000bf371000 (reserved)
    [ 0.000000] BIOS-e820: 00000000bf371000 - 00000000bf3f2000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000bf3f2000 - 00000000bf40f000 (reserved)
    [ 0.000000] BIOS-e820: 00000000bf40f000 - 00000000bf46f000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf46f000 - 00000000bf668000 (reserved)
    [ 0.000000] BIOS-e820: 00000000bf668000 - 00000000bf6e8000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000bf6e8000 - 00000000bf70f000 (reserved)
    [ 0.000000] BIOS-e820: 00000000bf70f000 - 00000000bf717000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf717000 - 00000000bf71f000 (reserved)
    [ 0.000000] BIOS-e820: 00000000bf71f000 - 00000000bf76c000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf76c000 - 00000000bf778000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000bf778000 - 00000000bf77b000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000bf77b000 - 00000000bf78b000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000bf78b000 - 00000000bf78c000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000bf78c000 - 00000000bf79f000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000bf79f000 - 00000000bf7ff000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: LENOVO 43492RG/43492RG, BIOS 6MET84WW (1.44 ) 03/29/2011
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-D3FFF write-protect
    [ 0.000000] D4000-DBFFF uncachable
    [ 0.000000] DC000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 disabled
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 100000000 mask FC0000000 write-back
    [ 0.000000] 4 base 138000000 mask FF8000000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000f68b0] f68b0
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
    [ 0.000000] 0000000000 - 00bf800000 page 2M
    [ 0.000000] kernel direct mapping tables up to bf800000 @ 1fffc000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000
    [ 0.000000] 0100000000 - 0138000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 138000000 @ bf766000-bf76c000
    [ 0.000000] RAMDISK: 378a4000 - 37c4a000
    [ 0.000000] ACPI: RSDP 00000000000f6870 00024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 00000000bf7ef2e1 00094 (v01 LENOVO TP-6M 00001440 LTP 00000000)
    [ 0.000000] ACPI: FACP 00000000bf7ef400 000F4 (v04 LENOVO TP-6M 00001440 LNVO 00000001)
    [ 0.000000] ACPI: DSDT 00000000bf7ef7d1 0F34F (v01 LENOVO TP-6M 00001440 MSFT 03000001)
    [ 0.000000] ACPI: FACS 00000000bf6e7000 00040
    [ 0.000000] ACPI: SSDT 00000000bf7ef5b4 0021D (v01 LENOVO TP-6M 00001440 MSFT 03000001)
    [ 0.000000] ACPI: ECDT 00000000bf7feb20 00052 (v01 LENOVO TP-6M 00001440 LNVO 00000001)
    [ 0.000000] ACPI: APIC 00000000bf7feb72 00084 (v01 LENOVO TP-6M 00001440 LNVO 00000001)
    [ 0.000000] ACPI: MCFG 00000000bf7fec2e 0003C (v01 LENOVO TP-6M 00001440 LNVO 00000001)
    [ 0.000000] ACPI: HPET 00000000bf7fec6a 00038 (v01 LENOVO TP-6M 00001440 LNVO 00000001)
    [ 0.000000] ACPI: ASF! 00000000bf7fedbe 000A4 (v16 LENOVO TP-6M 00001440 PTL 00000001)
    [ 0.000000] ACPI: SLIC 00000000bf7fee62 00176 (v01 LENOVO TP-6M 00001440 LTP 00000000)
    [ 0.000000] ACPI: BOOT 00000000bf7fefd8 00028 (v01 LENOVO TP-6M 00001440 LTP 00000001)
    [ 0.000000] ACPI: SSDT 00000000bf6e591a 0084B (v01 LENOVO TP-6M 00001440 INTL 20050513)
    [ 0.000000] ACPI: TCPA 00000000bf78b000 00032 (v02 PTL CRESTLN 06040000 00005A52)
    [ 0.000000] ACPI: SSDT 00000000bf77a000 009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
    [ 0.000000] ACPI: SSDT 00000000bf779000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
    [ 0.000000] ACPI: SSDT 00000000bf778000 0049F (v01 PmRef ApTst 00003000 INTL 20060912)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-0000000138000000
    [ 0.000000] Initmem setup node 0 0000000000000000-0000000138000000
    [ 0.000000] NODE_DATA [0000000137ffb000 - 0000000137ffffff]
    [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880134000000-ffff8801377fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x00138000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[8] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009e
    [ 0.000000] 0: 0x00000100 -> 0x000bf27c
    [ 0.000000] 0: 0x000bf282 -> 0x000bf35f
    [ 0.000000] 0: 0x000bf40f -> 0x000bf46f
    [ 0.000000] 0: 0x000bf70f -> 0x000bf717
    [ 0.000000] 0: 0x000bf71f -> 0x000bf76c
    [ 0.000000] 0: 0x000bf7ff -> 0x000bf800
    [ 0.000000] 0: 0x00100000 -> 0x00138000
    [ 0.000000] On node 0 totalpages: 1012637
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3920 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 14280 pages used for memmap
    [ 0.000000] DMA32 zone: 764999 pages, LIFO batch:31
    [ 0.000000] Normal zone: 3136 pages used for memmap
    [ 0.000000] Normal zone: 226240 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
    [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000bf27c000 - 00000000bf282000
    [ 0.000000] PM: Registered nosave memory: 00000000bf35f000 - 00000000bf371000
    [ 0.000000] PM: Registered nosave memory: 00000000bf371000 - 00000000bf3f2000
    [ 0.000000] PM: Registered nosave memory: 00000000bf3f2000 - 00000000bf40f000
    [ 0.000000] PM: Registered nosave memory: 00000000bf46f000 - 00000000bf668000
    [ 0.000000] PM: Registered nosave memory: 00000000bf668000 - 00000000bf6e8000
    [ 0.000000] PM: Registered nosave memory: 00000000bf6e8000 - 00000000bf70f000
    [ 0.000000] PM: Registered nosave memory: 00000000bf717000 - 00000000bf71f000
    [ 0.000000] PM: Registered nosave memory: 00000000bf76c000 - 00000000bf778000
    [ 0.000000] PM: Registered nosave memory: 00000000bf778000 - 00000000bf77b000
    [ 0.000000] PM: Registered nosave memory: 00000000bf77b000 - 00000000bf78b000
    [ 0.000000] PM: Registered nosave memory: 00000000bf78b000 - 00000000bf78c000
    [ 0.000000] PM: Registered nosave memory: 00000000bf78c000 - 00000000bf79f000
    [ 0.000000] PM: Registered nosave memory: 00000000bf79f000 - 00000000bf7ff000
    [ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
    [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feaff000
    [ 0.000000] PM: Registered nosave memory: 00000000feaff000 - 00000000feb00000
    [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
    [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bf000000 s82176 r8192 d24320 u524288
    [ 0.000000] pcpu-alloc: s82176 r8192 d24320 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 995159
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/c4fd4a58-2d4c-4805-be6e-ba2a6082d88e ro nologo fastboot quiet console=tty1 splash=silent,theme:arch-black,fadein
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3913576k/5111808k available (3803k kernel code, 1061260k absent, 136972k reserved, 3404k data, 556k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptable hierarchical RCU implementation.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty1] enabled
    [ 0.000000] allocated 40632320 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 2659.762 MHz processor.
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5321.17 BogoMIPS (lpj=8865873)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000087] Security Framework initialized
    [ 0.000092] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000341] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001352] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.001814] Mount-cache hash table entries: 256
    [ 0.002092] Initializing cgroup subsys ns
    [ 0.002094] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.002096] Initializing cgroup subsys cpuacct
    [ 0.002119] Initializing cgroup subsys memory
    [ 0.002132] Initializing cgroup subsys devices
    [ 0.002133] Initializing cgroup subsys freezer
    [ 0.002135] Initializing cgroup subsys net_cls
    [ 0.002136] Initializing cgroup subsys blkio
    [ 0.002173] CPU: Physical Processor ID: 0
    [ 0.002173] CPU: Processor Core ID: 0
    [ 0.002178] mce: CPU supports 9 MCE banks
    [ 0.002186] CPU0: Thermal monitoring enabled (TM1)
    [ 0.002193] using mwait in idle threads.
    [ 0.002908] ACPI: Core revision 20110112
    [ 0.046003] Setting APIC routing to flat
    [ 0.046400] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.079318] CPU0: Intel(R) Core(TM) i7 CPU M 620 @ 2.67GHz stepping 05
    [ 0.184270] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
    [ 0.184275] ... version: 3
    [ 0.184276] ... bit width: 48
    [ 0.184277] ... generic registers: 4
    [ 0.184278] ... value mask: 0000ffffffffffff
    [ 0.184279] ... max period: 000000007fffffff
    [ 0.184279] ... fixed-purpose events: 3
    [ 0.184280] ... event mask: 000000070000000f
    [ 0.194351] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.207564] Booting Node 0, Processors #1
    [ 0.320658] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.330605] #2
    [ 0.443696] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.453626] #3 Ok.
    [ 0.566717] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.569973] Brought up 4 CPUs
    [ 0.569977] Total of 4 processors activated (21287.06 BogoMIPS).
    [ 0.572103] devtmpfs: initialized
    [ 0.573048] NET: Registered protocol family 16
    [ 0.573151] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.573153] ACPI: bus type pci registered
    [ 0.573289] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.573306] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.626058] PCI: Using configuration type 1 for base access
    [ 0.626414] bio: create slab <bio-0> at 0
    [ 0.627742] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.631332] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.722020] ACPI: SSDT 00000000bf71a598 004F3 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
    [ 0.722304] ACPI: Dynamic OEM Table Load:
    [ 0.722306] ACPI: SSDT (null) 004F3 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
    [ 0.722404] ACPI: SSDT 00000000bf718718 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
    [ 0.722696] ACPI: Dynamic OEM Table Load:
    [ 0.722698] ACPI: SSDT (null) 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
    [ 0.743120] ACPI: SSDT 00000000bf719a98 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
    [ 0.743438] ACPI: Dynamic OEM Table Load:
    [ 0.743440] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
    [ 0.752996] ACPI: SSDT 00000000bf717d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
    [ 0.753290] ACPI: Dynamic OEM Table Load:
    [ 0.753291] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
    [ 0.764288] ACPI: Interpreter enabled
    [ 0.764290] ACPI: (supports S0 S3 S4 S5)
    [ 0.764305] ACPI: Using IOAPIC for interrupt routing
    [ 0.769164] ACPI: Power Resource [PUBS] (on)
    [ 0.772489] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
    [ 0.790239] ACPI: ACPI Dock Station Driver: 2 docks/bays found
    [ 0.790241] HEST: Table not found.
    [ 0.790243] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.790253] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
    [ 0.790291] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
    [ 0.790309] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
    [ 0.790324] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
    [ 0.790337] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
    [ 0.790349] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
    [ 0.790362] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
    [ 0.790387] pci0000:ff: Requesting ACPI _OSC control (0x1d)
    [ 0.790612] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 0.790654] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.790656] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.790657] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.790659] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 0.790660] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 0.790662] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
    [ 0.790669] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
    [ 0.790682] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
    [ 0.790695] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
    [ 0.790715] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.790717] pci 0000:00:01.0: PME# disabled
    [ 0.790762] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
    [ 0.790789] pci 0000:00:16.0: reg 10: [mem 0xf2427800-0xf242780f 64bit]
    [ 0.790862] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.790866] pci 0000:00:16.0: PME# disabled
    [ 0.790894] pci 0000:00:16.3: [8086:3b67] type 0 class 0x000700
    [ 0.790918] pci 0000:00:16.3: reg 10: [io 0x1800-0x1807]
    [ 0.790929] pci 0000:00:16.3: reg 14: [mem 0xf2424000-0xf2424fff]
    [ 0.791035] pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200
    [ 0.791058] pci 0000:00:19.0: reg 10: [mem 0xf2400000-0xf241ffff]
    [ 0.791069] pci 0000:00:19.0: reg 14: [mem 0xf2425000-0xf2425fff]
    [ 0.791079] pci 0000:00:19.0: reg 18: [io 0x1820-0x183f]
    [ 0.791147] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 0.791151] pci 0000:00:19.0: PME# disabled
    [ 0.791180] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
    [ 0.791203] pci 0000:00:1a.0: reg 10: [mem 0xf2428000-0xf24283ff]
    [ 0.791289] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.791293] pci 0000:00:1a.0: PME# disabled
    [ 0.791321] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
    [ 0.791341] pci 0000:00:1b.0: reg 10: [mem 0xf2420000-0xf2423fff 64bit]
    [ 0.791415] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.791419] pci 0000:00:1b.0: PME# disabled
    [ 0.791445] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
    [ 0.791518] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.791523] pci 0000:00:1c.0: PME# disabled
    [ 0.791549] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
    [ 0.791622] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.791626] pci 0000:00:1c.1: PME# disabled
    [ 0.791652] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
    [ 0.791728] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.791732] pci 0000:00:1c.3: PME# disabled
    [ 0.791760] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
    [ 0.791836] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.791840] pci 0000:00:1c.4: PME# disabled
    [ 0.791876] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
    [ 0.791900] pci 0000:00:1d.0: reg 10: [mem 0xf2428400-0xf24287ff]
    [ 0.791986] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.791990] pci 0000:00:1d.0: PME# disabled
    [ 0.792013] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 0.792086] pci 0000:00:1f.0: [8086:3b07] type 0 class 0x000601
    [ 0.792199] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
    [ 0.792224] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
    [ 0.792235] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
    [ 0.792245] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
    [ 0.792256] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
    [ 0.792266] pci 0000:00:1f.2: reg 20: [io 0x1840-0x185f]
    [ 0.792276] pci 0000:00:1f.2: reg 24: [mem 0xf2427000-0xf24277ff]
    [ 0.792321] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.792325] pci 0000:00:1f.2: PME# disabled
    [ 0.792347] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
    [ 0.792367] pci 0000:00:1f.3: reg 10: [mem 0xf2428800-0xf24288ff 64bit]
    [ 0.792396] pci 0000:00:1f.3: reg 20: [io 0x1860-0x187f]
    [ 0.792440] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
    [ 0.792466] pci 0000:00:1f.6: reg 10: [mem 0xf2426000-0xf2426fff 64bit]
    [ 0.792577] pci 0000:01:00.0: [10de:0a6c] type 0 class 0x000300
    [ 0.792588] pci 0000:01:00.0: reg 10: [mem 0xcc000000-0xccffffff]
    [ 0.792600] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.792612] pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
    [ 0.792621] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
    [ 0.792629] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
    [ 0.792681] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
    [ 0.792693] pci 0000:01:00.1: reg 10: [mem 0xcdefc000-0xcdefffff]
    [ 0.792779] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.792781] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 0.792783] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff]
    [ 0.792785] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
    [ 0.792841] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.792846] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.792850] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.792857] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.792994] pci 0000:03:00.0: [8086:4239] type 0 class 0x000280
    [ 0.793051] pci 0000:03:00.0: reg 10: [mem 0xf2000000-0xf2001fff 64bit]
    [ 0.793229] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.793255] pci 0000:03:00.0: PME# disabled
    [ 0.793326] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 0.793331] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.793335] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff]
    [ 0.793342] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.793396] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
    [ 0.793400] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
    [ 0.793404] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
    [ 0.793411] pci 0000:00:1c.3: bridge window [mem 0xf2500000-0xf25fffff 64bit pref]
    [ 0.793533] pci 0000:0d:00.0: [1180:e822] type 0 class 0x000805
    [ 0.793555] pci 0000:0d:00.0: reg 10: [mem 0xf2100000-0xf21000ff]
    [ 0.793687] pci 0000:0d:00.0: supports D1 D2
    [ 0.793688] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.793693] pci 0000:0d:00.0: PME# disabled
    [ 0.793743] pci 0000:0d:00.1: [1180:e230] type 0 class 0x000880
    [ 0.793765] pci 0000:0d:00.1: reg 10: [mem 0xf2100400-0xf21004ff]
    [ 0.793897] pci 0000:0d:00.1: supports D1 D2
    [ 0.793899] pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.793904] pci 0000:0d:00.1: PME# disabled
    [ 0.793949] pci 0000:0d:00.3: [1180:e832] type 0 class 0x000c00
    [ 0.793971] pci 0000:0d:00.3: reg 10: [mem 0xf2100800-0xf2100fff]
    [ 0.794103] pci 0000:0d:00.3: supports D1 D2
    [ 0.794104] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.794109] pci 0000:0d:00.3: PME# disabled
    [ 0.794175] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
    [ 0.794179] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.794184] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff]
    [ 0.794190] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.794260] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
    [ 0.794264] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.794269] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.794276] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.794278] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.794279] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.794281] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.794282] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.794284] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.794285] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
    [ 0.794317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.794387] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
    [ 0.794408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    [ 0.794426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
    [ 0.794446] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
    [ 0.794466] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
    [ 0.794560] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.797337] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.797382] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.797418] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    [ 0.797464] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.797507] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.797549] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.797585] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    [ 0.797629] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.797706] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.797709] vgaarb: loaded
    [ 0.797759] PCI: Using ACPI for IRQ routing
    [ 0.797761] PCI: pci_cache_line_size set to 64 bytes
    [ 0.797850] reserve RAM buffer: 000000000009e800 - 000000000009ffff
    [ 0.797852] reserve RAM buffer: 00000000bf27c000 - 00000000bfffffff
    [ 0.797855] reserve RAM buffer: 00000000bf35f000 - 00000000bfffffff
    [ 0.797858] reserve RAM buffer: 00000000bf46f000 - 00000000bfffffff
    [ 0.797861] reserve RAM buffer: 00000000bf717000 - 00000000bfffffff
    [ 0.797864] reserve RAM buffer: 00000000bf76c000 - 00000000bfffffff
    [ 0.797866] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
    [ 0.797962] NetLabel: Initializing
    [ 0.797963] NetLabel: domain hash size = 128
    [ 0.797964] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.797975] NetLabel: unlabeled traffic allowed by default
    [ 0.797989] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.797993] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.800008] Switching to clocksource hpet
    [ 0.800954] pnp: PnP ACPI init
    [ 0.800967] ACPI: bus type pnp registered
    [ 0.801465] pnp 00:00: [mem 0x00000000-0x0009ffff]
    [ 0.801466] pnp 00:00: [mem 0x000c0000-0x000c3fff]
    [ 0.801468] pnp 00:00: [mem 0x000c4000-0x000c7fff]
    [ 0.801469] pnp 00:00: [mem 0x000c8000-0x000cbfff]
    [ 0.801470] pnp 00:00: [mem 0x000cc000-0x000cffff]
    [ 0.801471] pnp 00:00: [mem 0x000d0000-0x000d3fff]
    [ 0.801473] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
    [ 0.801474] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
    [ 0.801475] pnp 00:00: [mem 0x000dc000-0x000dffff]
    [ 0.801476] pnp 00:00: [mem 0x000e0000-0x000e3fff]
    [ 0.801478] pnp 00:00: [mem 0x000e4000-0x000e7fff]
    [ 0.801479] pnp 00:00: [mem 0x000e8000-0x000ebfff]
    [ 0.801480] pnp 00:00: [mem 0x000ec000-0x000effff]
    [ 0.801481] pnp 00:00: [mem 0x000f0000-0x000fffff]
    [ 0.801482] pnp 00:00: [mem 0x00100000-0xbfffffff]
    [ 0.801484] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
    [ 0.801485] pnp 00:00: [mem 0xfed4c000-0xffffffff]
    [ 0.801536] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.801538] system 00:00: [mem 0x000c0000-0x000c3fff] has been reserved
    [ 0.801539] system 00:00: [mem 0x000c4000-0x000c7fff] has been reserved
    [ 0.801541] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
    [ 0.801543] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
    [ 0.801544] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
    [ 0.801546] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
    [ 0.801548] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
    [ 0.801550] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
    [ 0.801551] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
    [ 0.801553] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
    [ 0.801555] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
    [ 0.801556] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
    [ 0.801559] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
    [ 0.801560] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
    [ 0.801563] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.801572] pnp 00:01: [bus ff]
    [ 0.801603] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.801614] pnp 00:02: [bus 00-fe]
    [ 0.801617] pnp 00:02: [io 0x0cf8-0x0cff]
    [ 0.801619] pnp 00:02: [io 0x0000-0x0cf7 window]
    [ 0.801620] pnp 00:02: [io 0x0d00-0xffff window]
    [ 0.801621] pnp 00:02: [mem 0x000a0000-0x000bffff window]
    [ 0.801623] pnp 00:02: [mem 0x000c0000-0x000c3fff window]
    [ 0.801624] pnp 00:02: [mem 0x000c4000-0x000c7fff window]
    [ 0.801625] pnp 00:02: [mem 0x000c8000-0x000cbfff window]
    [ 0.801626] pnp 00:02: [mem 0x000cc000-0x000cffff window]
    [ 0.801628] pnp 00:02: [mem 0x000d0000-0x000d3fff window]
    [ 0.801629] pnp 00:02: [mem 0x000d4000-0x000d7fff window]
    [ 0.801630] pnp 00:02: [mem 0x000d8000-0x000dbfff window]
    [ 0.801632] pnp 00:02: [mem 0x000dc000-0x000dffff window]
    [ 0.801633] pnp 00:02: [mem 0x000e0000-0x000e3fff window]
    [ 0.801634] pnp 00:02: [mem 0x000e4000-0x000e7fff window]
    [ 0.801636] pnp 00:02: [mem 0x000e8000-0x000ebfff window]
    [ 0.801637] pnp 00:02: [mem 0x000ec000-0x000effff window]
    [ 0.801638] pnp 00:02: [mem 0xc0000000-0xfebfffff window]
    [ 0.801639] pnp 00:02: [mem 0xfed40000-0xfed4bfff window]
    [ 0.801669] pnp 00:02: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.801905] pnp 00:03: [io 0x0010-0x001f]
    [ 0.801906] pnp 00:03: [io 0x0090-0x009f]
    [ 0.801908] pnp 00:03: [io 0x0024-0x0025]
    [ 0.801909] pnp 00:03: [io 0x0028-0x0029]
    [ 0.801910] pnp 00:03: [io 0x002c-0x002d]
    [ 0.801911] pnp 00:03: [io 0x0030-0x0031]
    [ 0.801912] pnp 00:03: [io 0x0034-0x0035]
    [ 0.801913] pnp 00:03: [io 0x0038-0x0039]
    [ 0.801914] pnp 00:03: [io 0x003c-0x003d]
    [ 0.801915] pnp 00:03: [io 0x00a4-0x00a5]
    [ 0.801916] pnp 00:03: [io 0x00a8-0x00a9]
    [ 0.801917] pnp 00:03: [io 0x00ac-0x00ad]
    [ 0.801919] pnp 00:03: [io 0x00b0-0x00b5]
    [ 0.801920] pnp 00:03: [io 0x00b8-0x00b9]
    [ 0.801921] pnp 00:03: [io 0x00bc-0x00bd]
    [ 0.801922] pnp 00:03: [io 0x0050-0x0053]
    [ 0.801923] pnp 00:03: [io 0x0072-0x0077]
    [ 0.801924] pnp 00:03: [io 0x164e-0x164f]
    [ 0.801925] pnp 00:03: [io 0x002e-0x002f]
    [ 0.801926] pnp 00:03: [io 0x1000-0x107f]
    [ 0.801927] pnp 00:03: [io 0x1180-0x11ff]
    [ 0.801928] pnp 00:03: [io 0x0800-0x080f]
    [ 0.801930] pnp 00:03: [io 0x15e0-0x15ef]
    [ 0.801931] pnp 00:03: [io 0x1600-0x1641]
    [ 0.801933] pnp 00:03: [io 0x1644-0x167f]
    [ 0.801934] pnp 00:03: [mem 0xe0000000-0xefffffff]
    [ 0.801936] pnp 00:03: [mem 0xfeaff000-0xfeafffff]
    [ 0.801937] pnp 00:03: [mem 0xfed1c000-0xfed1ffff]
    [ 0.801938] pnp 00:03: [mem 0xfed10000-0xfed13fff]
    [ 0.801939] pnp 00:03: [mem 0xfed18000-0xfed18fff]
    [ 0.801940] pnp 00:03: [mem 0xfed19000-0xfed19fff]
    [ 0.801942] pnp 00:03: [mem 0xfed45000-0xfed4bfff]
    [ 0.802000] system 00:03: [io 0x164e-0x164f] has been reserved
    [ 0.802002] system 00:03: [io 0x1000-0x107f] has been reserved
    [ 0.802003] system 00:03: [io 0x1180-0x11ff] has been reserved
    [ 0.802005] system 00:03: [io 0x0800-0x080f] has been reserved
    [ 0.802007] system 00:03: [io 0x15e0-0x15ef] has been reserved
    [ 0.802008] system 00:03: [io 0x1600-0x1641] has been reserved
    [ 0.802010] system 00:03: [io 0x1644-0x167f] could not be reserved
    [ 0.802012] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.802014] system 00:03: [mem 0xfeaff000-0xfeafffff] has been reserved
    [ 0.802016] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.802017] system 00:03: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 0.802019] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.802021] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.802024] system 00:03: [mem 0xfed45000-0xfed4bfff] has been reserved
    [ 0.802027] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.802048] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 0.802071] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.802077] pnp 00:05: [io 0x0000-0x000f]
    [ 0.802079] pnp 00:05: [io 0x0080-0x008f]
    [ 0.802080] pnp 00:05: [io 0x00c0-0x00df]
    [ 0.802081] pnp 00:05: [dma 4]
    [ 0.802102] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.802106] pnp 00:06: [io 0x0061]
    [ 0.802128] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.802133] pnp 00:07: [io 0x00f0]
    [ 0.802141] pnp 00:07: [irq 13]
    [ 0.802162] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.802168] pnp 00:08: [io 0x0070-0x0071]
    [ 0.802172] pnp 00:08: [irq 8]
    [ 0.802194] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.802199] pnp 00:09: [io 0x0060]
    [ 0.802201] pnp 00:09: [io 0x0064]
    [ 0.802205] pnp 00:09: [irq 1]
    [ 0.802225] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.802234] pnp 00:0a: [irq 12]
    [ 0.802257] pnp 00:0a: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
    [ 0.802507] pnp 00:0b: [mem 0xfed40000-0xfed44fff]
    [ 0.802532] pnp 00:0b: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
    [ 0.802723] Switched to NOHz mode on CPU #0
    [ 0.802766] Switched to NOHz mode on CPU #1
    [ 0.802790] Switched to NOHz mode on CPU #2
    [ 0.802827] Switched to NOHz mode on CPU #3
    [ 0.803136] pnp: PnP ACPI: found 12 devices
    [ 0.803138] ACPI: ACPI bus type pnp unregistered
    [ 0.809007] pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff pref]
    [ 0.809010] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.809011] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 0.809014] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff]
    [ 0.809016] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
    [ 0.809019] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.809020] pci 0000:00:1c.0: bridge window [io disabled]
    [ 0.809025] pci 0000:00:1c.0: bridge window [mem disabled]
    [ 0.809029] pci 0000:00:1c.0: bridge window [mem pref disabled]
    [ 0.809036] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 0.809037] pci 0000:00:1c.1: bridge window [io disabled]
    [ 0.809042] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff]
    [ 0.809046] pci 0000:00:1c.1: bridge window [mem pref disabled]
    [ 0.809053] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
    [ 0.809056] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
    [ 0.809061] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
    [ 0.809066] pci 0000:00:1c.3: bridge window [mem 0xf2500000-0xf25fffff 64bit pref]
    [ 0.809073] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
    [ 0.809074] pci 0000:00:1c.4: bridge window [io disabled]
    [ 0.809079] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff]
    [ 0.809083] pci 0000:00:1c.4: bridge window [mem pref disabled]
    [ 0.809089] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
    [ 0.809090] pci 0000:00:1e.0: bridge window [io disabled]
    [ 0.809096] pci 0000:00:1e.0: bridge window [mem disabled]
    [ 0.809100] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 0.809113] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.809115] pci 0000:00:01.0: setting latency timer to 64
    [ 0.809122] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 0.809126] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.809133] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 0.809137] pci 0000:00:1c.1: setting latency timer to 64
    [ 0.809144] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    [ 0.809148] pci 0000:00:1c.3: setting latency timer to 64
    [ 0.809154] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 0.809158] pci 0000:00:1c.4: setting latency timer to 64
    [ 0.809166] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.809169] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.809171] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.809172] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.809173] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.809175] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 0.809176] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
    [ 0.809178] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    [ 0.809179] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xcdefffff]
    [ 0.809180] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
    [ 0.809182] pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf20fffff]
    [ 0.809183] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
    [ 0.809185] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
    [ 0.809186] pci_bus 0000:05: resource 2 [mem 0xf2500000-0xf25fffff 64bit pref]
    [ 0.809188] pci_bus 0000:0d: resource 1 [mem 0xf2100000-0xf21fffff]
    [ 0.809189] pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7]
    [ 0.809191] pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff]
    [ 0.809192] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.809193] pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.809195] pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 0.809196] pci_bus 0000:0e: resource 9 [mem 0xc0000000-0xfebfffff]
    [ 0.809250] NET: Registered protocol family 2
    [ 0.809382] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.810140] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.811876] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.812095] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.812096] TCP reno registered
    [ 0.812105] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.812123] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.812327] NET: Registered protocol family 1
    [ 0.812454] pci 0000:01:00.0: Boot video device
    [ 0.812477] PCI: CLS 64 bytes, default 64
    [ 0.812522] Unpacking initramfs...
    [ 0.857049] Freeing initrd memory: 3736k freed
    [ 0.857674] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.857678] Placing 64MB software IO TLB between ffff8800bb000000 - ffff8800bf000000
    [ 0.857679] software IO TLB at phys 0xbb000000 - 0xbf000000
    [ 0.857724] Simple Boot Flag at 0x35 set to 0x1
    [ 0.858111] audit: initializing netlink socket (disabled)
    [ 0.858121] type=2000 audit(1307283181.596:1): initialized
    [ 0.858513] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.860249] VFS: Disk quotas dquot_6.5.2
    [ 0.860346] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.860468] msgmni has been set to 7651
    [ 0.860628] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.860658] io scheduler noop registered
    [ 0.860660] io scheduler deadline registered
    [ 0.860695] io scheduler cfq registered (default)
    [ 0.860786] pcieport 0000:00:01.0: setting latency timer to 64
    [ 0.860808] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.861983] vesafb: framebuffer at 0xcf000000, mapped to 0xffffc90011100000, using 4032k, total 4032k
    [ 0.861984] vesafb: mode is 1280x800x32, linelength=5120, pages=0
    [ 0.861986] vesafb: scrolling: redraw
    [ 0.861987] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.968425] Console: switching to colour frame buffer device 160x50
    [ 1.066719] fb0: VESA VGA frame buffer device
    [ 1.066729] intel_idle: MWAIT substates: 0x1120
    [ 1.066730] intel_idle: v0.4 model 0x25
    [ 1.066731] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 1.066771] ERST: Table is not found!
    [ 1.066819] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.269059] serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.289528] 0000:00:16.3: ttyS0 at I/O 0x1800 (irq = 17) is a 16550A
    [ 1.342184] Linux agpgart interface v0.103
    [ 1.342250] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    [ 1.346699] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.346724] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.346788] mousedev: PS/2 mouse device common for all mice
    [ 1.346843] rtc_cmos 00:08: RTC can wake from S4
    [ 1.350225] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.368707] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    [ 1.368742] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 1.368818] cpuidle: using governor ladder
    [ 1.368930] cpuidle: using governor menu
    [ 1.369080] TCP cubic registered
    [ 1.369082] NET: Registered protocol family 17
    [ 1.369089] Registering the dns_resolver key type
    [ 1.369166] PM: Hibernation image not present or could not be loaded.
    [ 1.369169] registered taskstats version 1
    [ 1.369764] rtc_cmos 00:08: setting system clock to 2011-06-05 14:13:03 UTC (1307283183)
    [ 1.369887] Initalizing network drop monitor service
    [ 1.371869] Freeing unused kernel memory: 556k freed
    [ 1.372006] Write protecting the kernel read-only data: 6144k
    [ 1.374036] Freeing unused kernel memory: 276k freed
    [ 1.379233] Freeing unused kernel memory: 820k freed
    [ 1.414655] <30>udevd[108]: starting version 171
    [ 1.795803] SCSI subsystem initialized
    [ 1.809210] libata version 3.00 loaded.
    [ 1.814738] ahci 0000:00:1f.2: version 3.0
    [ 1.814756] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [ 1.814819] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 1.814859] ahci: SSS flag set, parallel bus scan disabled
    [ 1.814905] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
    [ 1.814907] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
    [ 1.814912] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.834923] scsi0 : ahci
    [ 1.835114] scsi1 : ahci
    [ 1.835275] scsi2 : ahci
    [ 1.835441] scsi3 : ahci
    [ 1.835597] scsi4 : ahci
    [ 1.835756] scsi5 : ahci
    [ 1.836192] ata1: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427100 irq 41
    [ 1.836195] ata2: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427180 irq 41
    [ 1.836196] ata3: DUMMY
    [ 1.836197] ata4: DUMMY
    [ 1.836199] ata5: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427300 irq 41
    [ 1.836202] ata6: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427380 irq 41
    [ 1.857446] Refined TSC clocksource calibration: 2660.001 MHz.
    [ 1.857456] Switching to clocksource tsc
    [ 2.153375] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.154602] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.154609] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.154838] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.154845] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.155842] ata1.00: ATA-8: HITACHI HTS725032A9A364, PC3ZC70F, max UDMA/100
    [ 2.155847] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.157009] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.157015] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.157216] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.157222] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.158183] ata1.00: configured for UDMA/100
    [ 2.158419] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72503 PC3Z PQ: 0 ANSI: 5
    [ 2.475905] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.478447] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
    [ 2.478687] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
    [ 2.480225] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, LT10, max UDMA/66
    [ 2.482926] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
    [ 2.483159] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
    [ 2.484661] ata2.00: configured for UDMA/66
    [ 2.486427] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N LT10 PQ: 0 ANSI: 5
    [ 2.805075] ata5: SATA link down (SStatus 0 SControl 300)
    [ 3.124275] ata6: SATA link down (SStatus 0 SControl 300)
    [ 3.138114] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 3.138157] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.138160] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.138177] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.140674] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 3.140675] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 3.140862] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 3.181948] sda: sda1 sda2 sda3 < sda5 sda6 >
    [ 3.182662] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.561285] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 5.402659] <30>udevd[721]: starting version 171
    [ 5.616621] ACPI: acpi_idle yielding to intel_idle
    [ 5.735472] fuse init (API version 7.16)
    [ 6.027584] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 6.027967] ACPI: AC Adapter [AC] (on-line)
    [ 6.033128] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 6.035503] thermal LNXTHERM:00: registered as thermal_zone0
    [ 6.035505] ACPI: Thermal Zone [THM0] (55 C)
    [ 6.041710] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
    [ 6.041730] intel ips 0000:00:1f.6: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 6.041916] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
    [ 6.042077] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
    [ 6.049877] Non-volatile memory driver v1.3
    [ 6.059884] ACPI: Lid Switch [LID]
    [ 6.059942] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 6.060605] acpi device:0c: registered as cooling_device4
    [ 6.060954] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 6.060959] ACPI: Battery Slot [BAT0] (battery present)
    [ 6.061014] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/LNXVIDEO:01/input/input3
    [ 6.061019] ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no)
    [ 6.070674] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 6.070713] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [ 6.080171] ACPI: Sleep Button [SLPB]
    [ 6.080265] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 6.080270] ACPI: Power Button [PWRF]
    [ 6.094462] wmi: Mapper loaded
    [ 6.119199] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 6.120805] iTCO_vendor_support: vendor-support=0
    [ 6.255308] usbcore: registered new interface driver usbfs
    [ 6.255333] usbcore: registered new interface driver hub
    [ 6.255381] usbcore: registered new device driver usb
    [ 6.255833] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 6.255940] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x1060)
    [ 6.256006] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 6.264694] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 6.264718] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
    [ 6.264723] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
    [ 6.264733] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    [ 6.264753] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 6.264757] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 6.264776] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 6.277774] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
    [ 6.277776] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
    [ 6.279704] ehci_hcd 0000:00:1a.0: debug port 2
    [ 6.283605] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 6.283623] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf2428000
    [ 6.296289] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 6.296427] hub 1-0:1.0: USB hub found
    [ 6.296432] hub 1-0:1.0: 3 ports detected
    [ 6.296507] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    [ 6.296510] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    [ 6.296518] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 6.296544] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 6.296547] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 6.296554] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 6.304884] sdhci: Secure Digital Host Controller Interface driver
    [ 6.304886] sdhci: Copyright(c) Pierre Ossman
    [ 6.306021] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1)
    [ 6.306036] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 6.306060] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 6.306067] sdhci-pci 0000:0d:00.0: setting latency timer to 64
    [ 6.306109] Registered led device: mmc0::
    [ 6.306154] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
    [ 6.316265] ehci_hcd 0000:00:1d.0: debug port 2
    [ 6.320131] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 6.320137] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xf2428400
    [ 6.332863] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 6.332976] hub 2-0:1.0: USB hub found
    [ 6.332980] hub 2-0:1.0: 3 ports detected
    [ 6.333103] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 6.333112] e1000e 0000:00:19.0: setting latency timer to 64
    [ 6.333275] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
    [ 6.359105] cfg80211: Calling CRDA to update world regulatory domain
    [ 6.408944] WARNING! power/level is deprecated; use power/control instead
    [ 6.422229] firewire_ohci 0000:0d:00.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 6.422238] firewire_ohci 0000:0d:00.3: setting latency timer to 64
    [ 6.426433] thinkpad_acpi: ThinkPad ACPI Extras v0.24
    [ 6.426435] thinkpad_acpi: http://ibm-acpi.sf.net/
    [ 6.426436] thinkpad_acpi: ThinkPad BIOS 6MET84WW (1.44 ), EC 6MHT44WW-1.19
    [ 6.426437] thinkpad_acpi: Lenovo ThinkPad T510, model 43492RG
    [ 6.427467] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
    [ 6.427632] thinkpad_acpi: radio switch found; radios are enabled
    [ 6.429394] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
    [ 6.429879] Registered led device: tpacpi::thinklight
    [ 6.429909] Registered led device: tpacpi::power
    [ 6.429964] Registered led device: tpacpi::standby
    [ 6.430024] Registered led device: tpacpi::thinkvantage
    [ 6.432085] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
    [ 6.432190] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
    [ 6.433196] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
    [ 6.482754] firewire_ohci 0000:0d:00.3: irq 43 for MSI/MSI-X
    [ 6.482808] firewire_ohci: Added fw-ohci device 0000:0d:00.3, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
    [ 6.512966] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 5c:ff:35:0a:f1:53
    [ 6.512970] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
    [ 6.513038] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
    [ 6.513160] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 6.523606] tpm_tis 00:0b: 1.2 TPM (device-id 0x0, rev-id 78)
    [ 6.605540] usb 1-1: new high speed USB device using ehci_hcd and address 2
    [ 6.690249] IBM TrackPoint firmware: 0x0e, buttons: 3/3
    [ 6.711176] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
    [ 6.717350] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 6.717428] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
    [ 6.717460] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 6.720938] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    [ 6.720939] iwlagn: Copyright(c) 2003-2010 Intel Corporation
    [ 6.720992] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 6.721001] iwlagn 0000:03:00.0: setting latency timer to 64
    [ 6.721041] iwlagn 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
    [ 6.729127] hub 1-1:1.0: USB hub found
    [ 6.729174] hub 1-1:1.0: 6 ports detected
    [ 6.737518] iwlagn 0000:03:00.0: device EEPROM VER=0x436, CALIB=0x6
    [ 6.737520] iwlagn 0000:03:00.0: Device SKU: 0Xb
    [ 6.737538] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
    [ 6.737612] iwlagn 0000:03:00.0: irq 45 for MSI/MSI-X
    [ 6.821935] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
    [ 6.823671] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 6.823675] hda_intel: Disable MSI for Nvidia chipset
    [ 6.823724] HDA Intel 0000:01:00.1: setting latency timer to 64
    [ 6.838298] usb 2-1: new high speed USB device using ehci_hcd and address 2
    [ 6.857486] iwlagn 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532
    [ 6.879747] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 6.960609] nvidia: module license 'NVIDIA' taints kernel.
    [ 6.960613] Disabling lock debugging due to kernel taint
    [ 6.965263] hub 2-1:1.0: USB hub found
    [ 6.965341] hub 2-1:1.0: 8 ports detected
    [ 6.981344] firewire_core: created device fw0: GUID 5cff35ff0af153ff, S400
    [ 7.031306] usb 1-1.3: new full speed USB device using ehci_hcd and address 3
    [ 7.187532] usb 1-1.4: new full speed USB device using ehci_hcd and address 4
    [ 7.353763] usb 1-1.6: new high speed USB device using ehci_hcd and address 5
    [ 7.513384] usb 2-1.1: new low speed USB device using ehci_hcd and address 3
    [ 7.645548] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input9
    [ 7.645677] generic-usb 0003:046D:C01D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.1/input0
    [ 7.645694] usbcore: registered new interface driver usbhid
    [ 7.645695] usbhid: USB HID core driver
    [ 7.709967] Linux video capture interface: v2.00
    [ 7.719955] Bluetooth: Core ver 2.15
    [ 7.720090] NET: Registered protocol family 31
    [ 7.720092] Bluetooth: HCI device and connection manager initialized
    [ 7.720094] Bluetooth: HCI socket layer initialized
    [ 7.725241] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f)
    [ 7.726401] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10
    [ 7.726462] usbcore: registered new interface driver uvcvideo
    [ 7.726464] USB Video Class driver (v1.0.0)
    [ 7.758706] Bluetooth: Generic Bluetooth USB driver ver 0.6
    [ 7.758969] usbcore: registered new interface driver btusb
    [ 7.779741] nvidia 0000:01:00.0: power state changed by ACPI to D0
    [ 7.779747] nvidia 0000:01:00.0: power state changed by ACPI to D0
    [ 7.779755] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 7.779763] nvidia 0000:01:00.0: setting latency timer to 64
    [ 7.779767] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 7.779885] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.19 Mon May 16 23:32:08 PDT 2011
    [ 8.276265] EXT4-fs (sda5): re-mounted. Opts: (null)
    [ 8.463589] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [ 8.602283] Adding 5276876k swap on /dev/sda2. Priority:-1 extents:1 across:5276876k
    [ 11.373150] coretemp coretemp.0: TjMax is 105 C.
    [ 11.373202] coretemp coretemp.2: TjMax is 105 C.
    [ 11.535629] thinkpad_ec: thinkpad_ec 0.40 loaded.
    [ 11.537879] hdaps: initial mode latch is 0x05
    [ 11.538022] hdaps: setting ec_rate=250, filter_order=2
    [ 11.538240] hdaps: device successfully initialized.
    [ 11.538282] input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input11
    [ 11.538405] input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input12
    [ 11.538480] hdaps: driver successfully loaded.
    [ 12.724831] tp_smapi 0.40 loading...
    [ 12.725385] tp_smapi successfully loaded (smapi_port=0xb2).
    [ 13.850893] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
    [ 13.903961] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
    [ 15.462951] NET: Registered protocol family 10
    [ 15.463466] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 15.463569] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 22.483544] wlan0: authenticate with 00:04:0e:ed:fd:00 (try 1)
    [ 22.485591] wlan0: authenticated
    [ 22.529427] wlan0: associate with 00:04:0e:ed:fd:00 (try 1)
    [ 22.534940] wlan0: RX AssocResp from 00:04:0e:ed:fd:00 (capab=0x11 status=0 aid=2)
    [ 22.534944] wlan0: associated
    [ 22.537651] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 22.636802] padlock_aes: VIA PadLock not detected.
    [ 23.420441] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
    [ 28.197892] EXT4-fs (sda5): re-mounted. Opts: barrier=1,data=ordered,commit=15
    [ 28.203962] EXT4-fs (sda6): re-mounted. Opts: commit=15
    [ 33.568008] wlan0: no IPv6 routers present
    [ 816.256803] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
    [ 2026.078172] usb 1-1.4: USB disconnect, address 4
    Output of lspci -v
    00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
    Subsystem: Lenovo Device 2193
    Flags: bus master, fast devsel, latency 0
    Capabilities: <access denied>
    Kernel modules: intel-agp
    00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 00002000-00002fff
    Memory behind bridge: cc000000-cdefffff
    Prefetchable memory behind bridge: 00000000ce000000-00000000dfffffff
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
    Subsystem: Lenovo Device 215f
    Flags: bus master, fast devsel, latency 0, IRQ 11
    Memory at f2427800 (64-bit, non-prefetchable) [size=16]
    Capabilities: <access denied>
    00:16.3 Serial controller: Intel Corporation 5 Series/3400 Series Chipset KT Controller (rev 06) (prog-if 02 [16550])
    Subsystem: Lenovo Device 2162
    Flags: 66MHz, fast devsel, IRQ 17
    I/O ports at 1800 [size=8]
    Memory at f2424000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: <access denied>
    Kernel driver in use: serial
    00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 06)
    Subsystem: Lenovo Device 2153
    Flags: bus master, fast devsel, latency 0, IRQ 42
    Memory at f2400000 (32-bit, non-prefetchable) [size=128K]
    Memory at f2425000 (32-bit, non-prefetchable) [size=4K]
    I/O ports at 1820 [size=32]
    Capabilities: <access denied>
    Kernel driver in use: e1000e
    Kernel modules: e1000e
    00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI])
    Subsystem: Lenovo Device 2163
    Flags: bus master, medium devsel, latency 0, IRQ 23
    Memory at f2428000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
    Subsystem: Lenovo Device 215e
    Flags: bus master, fast devsel, latency 0, IRQ 44
    Memory at f2420000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: HDA Intel
    Kernel modules: snd-hda-intel
    00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    Memo

    Sort of solved...
    NOTE!
    While almost all new ThinkPads have integrated Intel HD Graphics, on those ThinkPads with a Descrete NVIDIA GPU, the Intel GPU is disabled and cannot be enabled. There is no support for Switchable Graphics.
    NOTE!
    Contrary to the statement above, you can select the GPU in the BIOS of recent models with Nvidia Optimus, e.g. the T510 4384GEG. Windows seems to be able to switch between the GPUs, too.
    http://www.thinkwiki.org/wiki/Intel_HD_Graphics
    I guess there is no way getting this to work, unless Lenovo unlocks this feature via BIOS-update.
    Greetings

  • Radeon 9000 vs Intel GMA X3100 graphics

    which is better Radeon 9000
    or the intel GMA x3100
    graphics card
    because i want to play sims 2 on a new macbook
    thanks

    Good morning,
    Well, this is not an easy, clear cut question. The Radeon is an old, out of date card however it does have a dedicated GPU and Memory on board. The 3100 is an integrated chip with shared system memory, however, it is much newer and up to date.
    I'd put my money on the 3100 myself, however, neither is really up to the task of playing The Sims 2 in my opinion, that game (on the PC) taxed my CoreDuo with a GeForce 7900GT. :P
    Hope this helps! 
    David

  • Is Intel GMA X3100 graphics enough?

    Does anyone know if the updated MacBooks with the Intel GMA X3100 graphics processor now supports some of the build transitions that were previously unavailable (burn, flash etc...)
    Thanks

    Good question. I'll have to stop by my local Apple Store to check (I was there during the Leopard release, but didn't look specifically for that).

  • Snow Leopard on a 1.83 White iMac Core Duo w/ GMA 950 Integrated Graphics?

    Hi. My parent's computer is an older, white iMac with a GMA 950 integrated graphics. Currently it's running Tiger and it runs very well.
    However, I am in town for a short bit and was thinking about updating their system while I'm here. Does the iMac 1.83 with integrated graphics run Snow Leopard very well? Or should I just leave Tiger on it?

    Anyone with a 1.83 iMac Core Duo with integrated graphics (NOT the ATX 128 mb graphics) running Snow Leopard?

  • Msi gt70 2PE integrated HD 4600 graphics HDMI port does not appear to work.

    Hi guys,
    I have the GT70 2PE with integrated hd 4600 graphics and with a dedicated nvidia geforce gtx 880m card. The HDMI output does not appear to work.
    I'm tech savvy and cannot figure this out for the life of me. have tried nearly everything.
    lets start from the low level troubleshooting done:
    - plugged in the HDMI cable from a working computer that has HDMI hooked up to it. This did not make a difference from the new cable I bought for hooking up my TV to my laptop.
    - booted the laptop up and do not see a duplicate screen outputting via HDMI, all my video cards in my PC's I've built prior have always shown the HDMI output as a duplicate screen when I had a monitor hooked onto a PC. This makes me believe the HDMI port may be disabled/broken as there is no HDMI output at POST. Only the laptop monitor displays output.
    In Windows 8.1 I've installed the latest 4600 drivers and nvidia 880m beta drivers.(even though installing nvidia drivers shouldn't matter since I've read the HDMI output is tied to the 4600 integrated graphics chip, also if during POST the HDMI output never showed up on my TV, then installing the latest intel graphics drivers shouldn't have made a difference either, which it didnt make a difference).
    I've tried disabling the integrated graphics card then re-enabling it, as noted on the intel forums. - does nothing.
    what I've ruled out:
    -HDMI cable issues = no issues due to other PC's and devices working with the cables. All cable tests are direct connect to the TV, no intermediary devices such as hdmi splitters etc.
    -BIOS has zero options for graphics card options.
    Any ideas before i RMA this laptop? I'm at a loss. 

    OP's problem has been solved.  Also please don't resurrect and do not hijack other people's topics. Open your own one.
    >>Please read and comply with the Forum Rules.<<
    Topic Locked

  • Running Integrated and Dedicated Graphics At The Same Time

    Hey all, I know this question has been asked before, but I haven't found an answer particularly pertaining to my situation. 
    First of all, I have an HP Compaq Elite 8300 with an Intel i5-3470, integrated graphics (DisplayPort and VGA.) I also have a dedicated GPU (Nvidia GeForce 7300 LE.) I enabled the integrated graphics in the BIOS to use both the integrated graphics and the dedicated graphics at the same time. 
    Now, I have one monitor plugged into the integrated graphics, as I set that as the primary GPU. Whenever I plug a monitor into the 7300, both screens go blank and nothing shows up. As a matter of fact, on start-up once, I had all four monitors plugged in and all that happened was that every monitor stayed blank and blinked every few seconds. Any ideas on what to do?

    Hi,
    When the BIOS detects a discrete graphics card the integrated graphics processor will be disabled. HP normally placed black covers over the motherboard video ports marked do not remove when a discrete graphics card is shipped with the PC. Trying to run both is probably confusing the BIOS in your PC.
    Not all PCs containing the Intel i5-3470 will have an enabled graphics processor.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Will Lightroom benefit from "switchable" NVIDIA NVS 512MB Optimus graphics?

    Hi all, I'm about to get a new laptop -- one model includes "switchable" NVIDIA NVS Optimus 512MB graphics, meaning it has both built-in Intel graphics as well as the NVIDIA NVS Optimus 512MB, and can switch between them (to Intel for better battery life, and to NVIDIA for better graphics performance).
    My question is: will Lightroom perform noticeably better with the NVIDIA chip vs. the Intel chip? I've seen demos showing considerably improved 3d performance, but I'm not sure if the same performance boost applies to Lightroom graphics.
    Thanks kindly for any advice!

    TurnstyleNYC wrote:
    fwiw, I don't necessarily mind spending more for better performance (the dual graphics is about $100) but I was hoping I could make that decision based on some sort of practical expectation (ie, such as "expect about 15% snappier Lightroom performace").
    Because we are discussing a side-effect here, there is no way to come up with a number like this.  That is, Lr doesn't really care about how excellent your video adapter is, but the integrated adapter uses system memory, and Lr is memory intensive. So, making sure you have maximum memory freed up for applications is just prudent. But no one can say how this might translate into specific performance issues, or affect apps at all. It depends on what you are doing, and what else is running, and the state of your OS. It's very non-deterministic.
    As I said before, with lots of physical memory, all of this might be moot, except in the most extreme circumstances.
    Bottom line: Lr will work with pretty much any modern video adapter. Not using integrated graphics means more memory for the system and, therefore, more memory for applications. But whether or not this will make or break your experience is not really deterministic. But more memory headroom is never a bad thing.
    Make your decision based on that, not on some (probably made-up, or based on anecdotal evidence) specific application performance projection.

  • WMI Win32_VideoController and differentiating integrated vs discrete graphics

    I am trying to do some hardware and config inventory with WMI and I am having trouble with graphics cards in certain circumstances. I
    can use something like this (get-wmiobject
    -class:'Win32_VideoController' -namespace:'root\CIMV2' -computername:'.').DriverVersion and I will get the driver version
    of the currently active card. Works great for a desktop machine, but for a laptop with both integrated and discrete graphics, unless some program that triggers discrete graphics is also running, I get inventory info about the Intel HD only, and in 99% of cases
    what I really want is the discrete graphics. I figure there are two possible ways to address it. Either there is a way to use WMI to get all installed cards, not just the currently active one, or there is a PowerShell way to specifically trigger use of the
    discrete card. Can anyone point me in the right direction?

    jrv, I don't understand the link. I know that the Intel GPU can handle dual monitors, but that's not my issue. My desire is to use PowerShell to inventory the GPUs on the machine, including available RAM and driver number. When I use the WMI based approach
    noted above, I ONLY get the active GPU, which is normally the Intel GPU because the script is usually run when other, graphics intensive, programs are not running, so the Intel GPU is active. At least, I think that may be what's happening. But again, the key
    is, on a dual GPU system, how does one use WMI to get ALL GPUss, not just one? And failing that, it is the discrete card that I most need to inventory, so is there a way to trigger use of the discrete card so that WMI reports that? As far as I can tell this
    may be exclusively an nVidia Optimus issue, and PowerShell/WMI just can't be used due to limitations in PowerShell functionality. 

  • Upgrade MacPro1,1 with ATI Radeon X1900 XT 512 MB and Open GL 1.7.7. to recommended system requirements for heli simulator: OpenGL Version 2.1 compatible 3D-graphics card from NVIDIA or ATI with 512MB.

    I want to install a helicopter simulator into my MacPro1,1 with ATI Radeon X1900 XT 512 MB and Open GL 1.7.7. Recommended system requirements for the heli simulator are: OpenGL Version 2.1 compatible 3D-graphics card from NVIDIA or ATI with 512MB (at least as fast as NVIDIA 8600, 9400 or ATI Radeon HD 2400). Is there such a graphics card available that will work in my Mac Pro?

    Are you really still running 10.6.3? you will need 10.6.5+ so do that and make a clone.
    ATI 5770 from Apple Store - like 1000s of others have done and in the comments section on the store page.

Maybe you are looking for

  • Read Tab delimited File from Application server

    Hi Experts, I am facing problem while reading file from Application server. File in Application server is stored as follows, The below file is a tab delimited file. ##K#U#N#N#R###T#I#T#L#E###N#A#M#E#1###N#A#M#E#2###N#A#M#E#3###N#A#M#E#4###S#O#R#T#1##

  • Cleared documents

    From which table we get cleared documents? Edited by: abhi on Jan 23, 2008 8:49 AM

  • Service settings keep changing?????

    I have digital voice and someone keeps changing my settings on the services I have. Is this your programmers or someone who is making changes? Example: I have simultaneous ring turned on for my home office line and somehow it keeps getting turned off

  • WM inventory clearance created under which movt type 711-718

    Hi all, My client requirement is to see the WM inventory clearance created under which movt type 711-718. I have found the link in MSEG but to further segregate them i want (IM material document cliearance & item number )   I have checked Bin Inv rec

  • Incosistent execution from One Env to Other

    Hi , I am working on application which has search page .It allows user to search PO's based on certain parameters ,ie ,like PO#,Customer Name & customer Number(i have lov for this), Start date ,end date ,etc. While running this search page on local m