T410 keyboard and mouse will not wake from 'Power Source Optimized'

'Power Source Optimized' from the Lenovo Power Manager puts the computer to sleep after a prescribed time.
To rewake it appears that one must press the power key briefly.
The login screen for W7 appears and prompts me to enter my password.
Only problem is - the keyboard and mouse refused to wake up. Could anyone tell me what the trick is?
Thank you!
Ade

if you use an external keyboard and mouse, would they work when you wake up the computer?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

Bluetooth keyboard and mouse will not connect

I loaded a linux iso on a usb. Loaded it on a reboot. It may have been corrupted or something, because it did not load correctly. I rebooted the computer again and now the bluetooth keyboard and mouse will not connect. How can I fix this?
Thank you.
Ryan

Hello:
These are knowledge base articles:
Reset PRAM:
http://support.apple.com/kb/PH4405
Reset SMC:
http://support.apple.com/kb/HT3964
Those may or may not help, but they will not hurt anything.
Barry

Keyboard and Mouse Frozen after wake from Hibernate

My keyboard and mouse are frozen when laptop awakes from hibernate. Running XP Pro SP3 with latest drivers etc

Update:I found that I can get keyboard response when the laptop wakes up from Sleep mode.Updated BIOS to F.23 - No improvementUpdated Touchpad driver - No improvement

Help! My Keyboard and mouse will not work all of a sudden on my G4

I am having a problem with both my keyboard and mouse. I have a graphite G4 and recently had to run disk warrior on i. I have had endless problems with this computer and even have a 2nd hardrive on it since it only came with a 10Gig. Needless to say it is all I have right now. I am running os x 10.2.2 on it and a few days after I recessitated it with disk warrior my keyboard and mouse suddenly went dead while I was on the internet. I tried pluging the two into different usb ports both on the tower and also into the flat panel mac display that it came with and nothing. I plugged in my wacom tablet and that works. i then tested the mouse and keyboard on my husband's dell laptop and they work. I cannot reset the PRAM b/c the keyboard won't work! What do I do??????

Besides removing the battery, you can do a PMU reset which will zap PRAM. See Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
You only describe your Mac as a G4 graphite, which I believe is a G4 AGP. Here’s a diagram showing the location of the PMU reset button.
G4 AGP Graphics (Sawtooth)/Gigabit Ethernet
http://img96.imageshack.us/img96/5706/sawtoothlogicbd2yu.jpg
Look at these links to determine which model G4 you have.
Power Mac G4: How to Differentiate Between Models
http://docs.info.apple.com/article.html?artnum=58418
Power Mac G4: How to Differentiate Between Models (Part 2)
http://docs.info.apple.com/article.html?artnum=42739
 Cheers, Tom
Also look at this link.
Common fixes for USB device issues (unrecognized, etc.)
http://www.macfixit.com/article.php?story=20070824012114701
Message was edited by: Texas Mac Man

IMac will not wake from sleep after 10.4.8 Update

Recently after a couple of software updates my IMac goes to sleep and the Bluetooth keyboard and mouse will not wake it. The option for wake with Bluetooth is checked. I zapped the PRAM and also checked the HD, Nothing has changed. NOTE: No new software or hardware installs were done except for 10.4.8 update and the other mac software updates. This did not happen in prior versions of the OS on my iMac. Is this a new bug?
iMac G5 1.8 (pre iSight) Mac OS X (10.4.8) Bluetooth, Wake from Sleep

I've been dealing with this same issue, have tried everything, but to no avail. After MANY sessions on the phone with Apple tech support, as well as an Apple product specialist, I was advised to erase my computer and do a fresh install. I did an archive an install, which didn't help, but am not thrilled about the prospect of erasing everything and starting over. This problem started after the August 2006 round of updates. I feel it's bluetooth related, because I used a usb keyboard and mouse for a week as a test, with no problem. The funny thing is, I unchecked "allow bluetooth device to wake computer" thinking it might help, but the bluetooth devices continue to wake the computer anyway (except when it refuses to wake, of course!)
Jerry

Since my G5 died I was thinking about getting a Mac Mini, but I have a ViewSonic Monitor (from 2004) and a USB keyboard and mouse - I also have the external drive tha downloaded my files on to. Do you think the monitor, keyboard and mouse will work on it?

Since my G5 died I was thinking about getting a Mac Mini, but I have a ViewSonic Monitor (from 2004) and a USB keyboard and mouse - I also have the external drive that I downloaded my files on to. Do you think the monitor, keyboard and mouse will work on it? Would I have to get a hub so I could use the stuff I already have? Is that viewsonic too old to work on it?
What else would I need? Please advise...

Yes for keyboard and mouse.
The monitor will work if it has an HDMI, VGA ir DVI input. If it only has a VGA input you will need this adopter
http://store.apple.com/us/browse/home/shop_mac/mac_accessories/cables/cable_choo ser#selected-step1=MINI-DISPLAY-PORT&selected-step2=VGA&step=3

IPhone will not wake from sleep and locks up with new MMS update

Hey everyone,
Has anyone had these problems with their new update as well?
1) Sometimes my iPhone will not wake from sleep mode, I have to hold down both buttons for it to restart...I do this about 5 times a day!
2) I cannot send SMS messages and when I send more than one sometimes the iPhone locks up and will not unfreeze.
Does anyone know if this is an Apple update issue or if it is an AT&T issue? And if this is being addressed?
Apple, if you read this could there be an update to all members what is going on?

I am experiencing the same issue with iPhone 3GS. After yesterday update to 3.1.2, it is a bit better in the sense that I can restart the iPhone slightly faster but still getting frozen screen during a call. I will try to call support once more. I don't believe that the problem is solved in the new update.

Keyboard and mouse won't wake computer

All of the sudden, keyboard and mouse have ceased to function. Computer is on, with programs running. If I shut down computer, it restarts and loads the same programs. After a few minutes it goes to screen saver.
Cursor is stuck in the upper left corner of screen and won't move. Keyboard is completely disconnected. Keystrokes do nothing. I can't check any settings because I can not access them without a mouse or keyboard. I've tried connecting a USB wired mouse, and it will not wake the computer either.
Batteries in both keyboard and mouse are new. Anything else to try before taking it in for repair??

Hello, someSW/HW may be hanging it...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Dual 1.25 mdd g4 will not wake from sleep

if i leave the comp on and it goes to sleep or if i force it sleep, it will not wake, the power button will not pulse its stays on solid, the display shuts down, but when i move the mouse nothing, if i click the mouse it will light up red only when i click it after that i goes back out, the display stays in sleep mode, i have to hold the power button down till it shuts off then restart it and it starts and runs fine till it goes to sleep then i have to restart
any help would be great, thanks

Well I'm having a combination of a number of these issues. Background is dual 1.25 GHz with OSX 4.11. Current situation is that the computer will not wake when put to sleep. This will happen whether I select Sleep from the Apple menu or just let the thing time out and put itself to sleep. I haven't been able to narrow it down but if I don't wait too long after sleep it seems I can log back in (even though during sleep the power light is only dim and doesn't pulse and the fans keep running so it doesn't really seem like "sleep"). Mostly the power light dims when in sleep and then is unresponsive requiring a hard reset. The most recent development is that after some time instead of going into this nebulous sleep state the computer just shuts down altogether, just like a hard crash, and I have to restart and reset the clock.
I've read many of the posts regarding problematic PCI USB cards and I did have one which I removed, but this didn't have any effect. I've reset the PMU to no effect. I should also point out that the USB ports on the back of my Apple Cinema Display don't work now either and I have to plug the keyboard directly into the Mac (though I can boot the computer from the power button on the keyboard).
Any knowledge or suggestions would be great...

890FXA-GD70 Will Not Wake From S3 Sleep

890FXA-GD70 will not wake from S3 sleep; the power comes back on and the fans run but the video never returns and the system hard locks with a POST code of 22 or 24. Other than this issue the system is rock solid.
Windows 7 Ultimate 64
AMD Phenom II X4 955 Processor
Sapphire 5870 Graphics
Crucial M4 SSD
Corsair DDR3
No overclock
I have reproduced the issue on two 890FXA-GD70s motherboards and I am convinced that this is not a result of a failed motherboard. I also was able to move my fully installed SSD hard drive, processor, memory and graphics card to an Asus 890FX board and successfully wake from S3 sleep proving that my OS and driver installation are working correctly.
I know how to properly set the BIOS as I have installed many 890GXM-G65 motherboards for S3 sleep without issue. The problem seems unique to the 890FXA-GD70.
Is there a fix for this?

I have identified the cause. The "Extra RAID/IDE Controller" must be "Enabled" to use S3; otherwise the system will hang on the wake event. This is true even if the "Extra RAID/IDE Controller" goes unused. The "Extra RAID/IDE Controller" must be set to "Enabled" for S3 sleep to wake.
This would seem to me to be a bug since none of the other MSI boards I have used require the optional IDE controller to be enabled in order for S3 to function properly.

TS2662 trackpad and mouse will not scroll

On 27" iMac using OS 10.7.4, trackpad and mouse will not scroll or swipe, can point with both, click only with mouse, scroll only with keys on keyboard. What have I done now??? They are all paired with good batteries. Have checked in settings and they are enabled to scroll.

In Lion the scrolling is natural i.e. reversed to the way that computers typically scroll. Think of the scroll as grabbing the page an moving it either up or down vs moving the scroll bar down up or down. Also, the scroll bars are "hidden" by default and only show up when you are scrolling.
Are you using and Apple mouse? If you go to the system preferences and then to the "mouse" section there are options to change the natural scrolling. And if you go to System Preferences and then to "general" you can set it to show or hide the scroll bars.
If this is not what the issue is let me know and let me know what mouse you are using because there is something else that it could be.

Macbook pro will not wake from sleep without shut down?

My macbook pro 2007 will not wake from sleep without holding down start button and then restarting? Is this a serious problem?

You can Try resetting NVRAM/PRAM http://support.apple.com/kb/ht1379
You can run the Disk Utility> Repair Disk from Recovery ( command R on start)
if that does not sort it I would reinstall OS X

IPhone 1.1.4 will not wake from sleep mode

Hi all,
I have an iPhone with 1.1.4 firmware. The problem that I have is that the phone will not wake from sleep mode by pressing the "home" button. I have to press both the "home" and "sleep/power" buttons and hold them for 6 seconds for the phone to restart. I did restore the phone twice - did not solve the problem. Then, one day, I left it charging for about 3 days and when I came back it started working fine. Not for long though( After about a week of normal usage the wake up problem came back. I don't know what to do. I don't think it's the software problem, since I did complete restoration 2 times.
If the phone is connected to a charger or computer - it wakes up fine.
Thanks, Gene K
Message was edited by: rimini

rimini,
When you've restored the iPhone, have you tried setting it up as a new phone? This would truly eliminate software as a possibility.
If setting it up as a new phone doesn't correct the issue, it's probably time for service: apple.com/support/iphone/service/faq/
Hope this helps,
Raleigh

HP 15t j000 will not wake from sleep/hibernate Windows 8,8.1,10

HP 15t j000 will not wake from sleep/hibernate Windows 8,8.1,10. I have to restart. I've searched high and low for answer to this. I've seen videos, played with power settings. I hoped each Windows system upgrade would fix the problem. No go. Anyone with any ideas?

Hi , Thank you for your query. I understand that after upgrading to Windows 10, it will not wake from sleep mode unless you restart. The first step I would try is to disable "Hybrid Boot' or "Hybrid Shutdown. This can be done by turning off "Fast Startup" Fast Startup - Turn On or Off in Windows 10 Next try running the "Update Troubleshooter" Windows Update troubleshooter. Once launched, it should show a screen like this. Use the second option "Background Intelligent Transfer Service", it should lead to a force update of 'Windows Updates' that may not be automatically being applied, that could fix some of these issues.
Here is a link to HP PCs - Sleep and Hibernate Issues (Windows 10, 8) that may also help. To say thanks for replying please click the thumbs up button below.If this yielded a solution please choose solution provided to help other people find this information. Best of Luck!

I have 2 itunes accounts. I can no longer use my first one for purchases so I had to start a new one and it will not sync from my new one without deleting everything on my same ipod from my previous account. How do I sync between both accounts?

I have 2 itunes accounts. I can no longer use my first one for purchases so I had to start a new one and it will not sync from my new one without deleting everything on my same ipod from my previous account. How do I sync between both accounts?

Wayland wrote:
The CS.com service account has long been closed. I cannot get it to respond to my years ago password for that account. So I ask them to send me a new password and of course it goes to my years ago email number.
Don't have it send email.
Answer the security questions.

T410 keyboard and mouse will not wake from 'Power Source Optimized'

Similar Messages

Maybe you are looking for