T410 - LED backlight turns off as soon its plugged in and battery threshold warning pops up

Situation:
my T410 with i7 and dedicated NS31000 runs on the 9cell battery.
So now I run out of juice and Win7 shows the warning "10% left yadayada...plug in"
So now I wait until it is at 9% and plug in the power.
What then happens is: the LED backlight of the screen turns off.
You can see the pictures etc on the screen, just w/o the backlight.
Of course you think the backlight is at 0, so you try to crank it up and you can see the bar,
but it is the actual backlight which is turned off.
It is not dimmed.
Sending the laptop to sleep, hibernation or rebooting it turns the backlight on again.
Can anyone check and try to replicate this?
AS OF 11/11/11: the issue still exists: http://youtu.be/zC-KdJQiW0w
4th repair and still not fixed!!!
Solved!
Go to Solution.

I can assure you that Lenovo support is excellent. It's handled by the same original IBM division in Atlanta Georgia. They are there for you 24/7 every day. I would not hesitate to give them a call, as it's also beneficial for them to hear from you. If it's not reported, they won't be aware of it. Many things like this do not show up in the very extensive testing that Lenovo does before releasing a new model. Therefore we are helping them by reporting these issues. Please let us know the outcome of your call....

Similar Messages

  • My iphone 4's backlight turns off ocassionally.,some say update it and it will be ok..,anybody can help me?

    my iphone 4's backlight turns off ocassionally.,some say update it and it will be ok..,anybody can help me?

    yes the phone is already on..,autolock is set to 1 min..,what i mean is that whenever im using my iphone the backlight turns off and i got a black sceen but i can  see the icons on my iphone if i put it on a bright light..,even if i press the wake up botton the backlight just lit at little and it turns off again,,,and after about 30 mins on sleep mode and press the wake up button it will function as a normal again,few minutes after backlights turns off again..thanks!

  • My iPhone 3gs will not turn on unless it is plugged in and battery says 68% any thought

    my iphone 3gs will not turn on unless it is plugged in. battery says 68%. it will not connect to internet. will not make or recieve calls? any thoughts?

    I have tried to restore and it still wont come on unless plugged in

  • [L530] Battery LED indicator turns off when plugged in

    Hello. When I plug in power supply, the back battery LED indicator turns off, so after closing lid (leaving power on) I have no information whether the PC is on or off (the only back indicators are battery and sleep). Is there any possibility to change the bahavior of this LED?

    ALSO, the fans are really loud when the power adapter is unplugged. Not grinding or anything, just like it is working double as hard. I unplugged it, held down the power button for 10 seconds, and it restarted ok. Caps lock light works and now i'm going to plug the power adapter in...screen goes black, illuminated keys turn off, but the backlight is still on. Plugged in, it is completely unresponsive.

  • My ipod nano stops the music once the backlight turns off

    my iPod nano 6th generation stops the music once the backlight turns off, how do i fix it?

    Your nano is pausing playback when the screen goes dark (Either when it goes dark on its own or when you click the sleep/wake button). The reason for this is that it is not detecting your headset. You may be able to hear music, but the headset jack is not inserted enough for the nano to detect that it is there (or something is blocking the connection). Here are your three options:
    Insert the headset jack harder. Most folks find that this solves their problem. If you can see ANY of the silver of the plug when it is inserted, it is NOT fully inserted. You should feel and hear a click" when it is fully inserted.
    Clean out the crud in the headset port. If you have tried #1 and it just won't insert all the way, it is likely that you have crud in your headset jack. Shine a light in there. The entire inside of the jack is white, so if it looks dark down at the bottom, there is probably crud down there. You can try blowing it out or using canned air. Just understand that shoving anything else in there to clean it out will be taking your warranty into your own hands! However, I have cleaned mine out using whatever was handy and small enough to fit in there and so far so good. Your results may vary!
    Take it to the Apple store. If you have really tried with 1 and 2 and it is still happening, then there might just be something up with your headset port or your headset jack. If it is the headset jack, you can look closely at that and be pretty sure if that is the problem. Try another headset to make sure. If you have worked all the way through to this point and it is still happening, it is time to take it to the Apple store.
    i

  • Hey how are you guys listen i have an iphone 4s the one i use with the H20 CARRIEr and i trying to enable the option call forwarding and when i type tho number i go back and i notice to the call forwarding it turning off as soon i back to the main menu ?

    hey how are you guys listen i have an iphone 4s the one i use with the H20 CARRIEr and i trying to enable the option call forwarding and when i type tho number i go back and i notice to the call forwarding it turning off as soon i back to the main menu ?

    There are a lot of posts in the forums today with people having problems with iMessage.   There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
    I would just wait it out - I'm sure it will be sorted out soon.

  • Home Sharing turns off as soon as my computer enters sleep mode.  How can I work around this issue?

    Home Sharing turns off as soon as my computer enters sleep mode.  How can I work around this issue?

    please start firefox in safemode (by pressing the shift-key while it is launching) & go to ''firefox > options > advanced > general'' & disable hardware acceleration.
    for some background on that issue you can also refer to [https://bugzilla.mozilla.org/show_bug.cgi?id=812683 bug #812683]

  • I know you can't "turn off" tv but its getting hot in standby..

    Hi
    I know you can't "turn off" tv but its getting hot in standby, I havent used it all day, and the top is still really warm. I know this is the heat sink, but why is it getting so hot when in standby and doing nothing, for many hours?
    To turn off I realise will have to switch off at mains. Is this recommended? when should I do it? when not syncing and in standby?
    I'm a little worried by how hot it is, when never used for about 48 hours and in standby
    cheers

    ........ leaving it on 24/7 doesnt cost that mch though does it?
    All depends on how much your electricity costs, at 10 p/c per kilowatt/hour, your tv using around 18 W in stand-by will cost you about 30 1/4 p/c a week.
    If cost is a factor for you then consider switching it off overnight, don't however worry too much about the heat. It may appear to run hot because of its unusual heat dissipation, however if you were to place your hand on the heat sync surrounding your cpu on your mac/pc, you'd likely realise comparatively the tv isn't excessively warm. (The CPU's in my mac are currently running at 44-56 C for example)
    I don't particularly see much wrong in turning the unit off from time to time, (although I'm not sure I like the idea of not knowing if the HDD is writing at the time) assuming it isn't excessive. Excessive switching is not good for most devices since strain on mechanical parts and stress caused to electrical components due to large temperature variations can lead to early failure.

  • I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.

    I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.

    What TC do you have? Model number direct from the base is a big help, it will be A1 followed by 3 numbers.. eg
    A1409 Gen 4.. The new AC is A1470
    How is it setup?
    I need the whole network setup. what modem/router, how is the TC connected etc??
    I also need to know what IP the ipod gets, so I can see what mode the TC or network router is working in.

  • I was using my ipad it was under 10% but no under 4% it turned off then i pluged the charger in and flashed on then showed apple sign after i turned it on. now its going back and forth from the apple sign and battery symbol ive changed chargers its not on

    hey please help!
    i was using my ipad it was under 10% but no under 4% it turned off then i pluged the charger in and flashed on then showed apple sign after i turned it on. now its going back and forth from the apple sign and battery symbol ive changed chargers its made no differnce its been like 3 hours ive tried to do that reset thing holding lock button and home button for 10 seconds at the same time. WHAT DO I DO?

    Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
    http://support.apple.com/kb/TS2802
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    iPad: Charging the battery
    http://support.apple.com/kb/HT4060
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • Computer turns off as soon as it is unplugged, batter won't charge either

    my computer made a relatively gentle drop (about 1.5) feet, landed flat onto a carpeted floor.
    now it works when plugged in, but the batter won't charge and turns off as soon as you unplug the power cord.
    any ideas a

    dc,
    my computer made a relatively gentle drop (about 1.5) feet, landed flat onto a carpeted floor.
    So how did it land? On the DC input plug? battery end? is this a 14 or 12"?
    So two things come to mind. 1) Damaged battery/battery connector/logic board. The last would show up in cracked battery connector mounts . 2) damage to the DC in board such that the battery is not recognized but the iBook still works on wall power.
    Richard

  • Why is my music stop playing when the backlight turns off?

    Hi I got a new iPod classic about 2 months ago and now every time the backlight turns off it stops playing music. Can somebody help me because the only solution I found was to put my backlight to ''always on''

    This is usually a sign that your headphones are not plugged all the way in.  Make sure the white part of the headset is flush with the body of the Nano and no silver from the plug can still be seen.
    If you are 100% positive that the earbuds are all the way in, double check to make sure the headphone jack is clean and clear of debris and/or damage.
    B-rock

  • Iphone turns off randomly when its locked

    My iphone turns off randomly when its locked, also the screen flashes occasionally when im making a call. And also in the usage section it doesnt come up with any information in the time since last full charge section, even though ive left it on charge for a solid 8 hours over night the last two nights, any ideas????

    Hey bbkae
    Continue you troubleshooting with the article below to check the health of your battery. I would try to run hardware diagnostics on it to see if it passes the test.
    Mac notebooks: All about batteries
    http://support.apple.com/kb/ht1446
    Regards,
    -Norm G.

  • Backlight turns off, then restarts while trying to sync iPad

    Today I was at a friends house syncing their devices (iPhone 4, iPad 2) to their Late 2006 MacBook.  While syncing, the backlight turned off.  I shined a flashlight thru the Apple logo, and I tried pressing the brightness up button, and could see the LCD was still on and functioning, but the backlight pretty much froze.  I was able to fix that by turn the brightness all the way down, then back up.  Less then 30 seconds later, the computer turned off, then restarted automatically.  Any ideas what it could be?  Ill have checks the specs, but I know it's a 2.0GHz Core 2 Duo, 10.6.8.

    For Clarification- The phone connects to the computer, starts sending data, then powers off before the connection is complete. Only the 6085 has this problem.

  • Macbook unibody backlight turns off while booting to 10.7

    This is a customer unit, so I do not want to do anything to their hard drive without being completely sure that is the issue.
    When attempting to boot a Macbook 13-inch Late 2009 (polycarbonate Unibody) to 10.7 on an internal or 10.7.5 on an external hard drive connected via USB the unit boots through the gray screen with Apple logo and spinning gear properly but loses backlight at the point I would normally get the blue screen. It does this in Safe Boot as well.
    I am able to boot to an external USB drive running 10.6.8 without issue.
    I am also able to boot to the recovery partitions of the 10.7 drives with no video issues.
    When trying to boot to the regular partitions, the backlight turns off where the screen should be going to blue just before the login prompt or desktop depending on the account setup.
    Has anyone else had this trouble?

    i have the exact same issue i still have a applecare so i brought it to my local repair shop(filled with greedy lebanese men who ****** me over when i bought my macbook in march of 2009 2 days before the new macbook pros came out they were like nope u paid $600 extra for an inferior product but we're not going to refund you because u can **** yourself even though i called apple and they said they could replace it with the new one if i bought it from them but since i bought it from one of their repair centers and not an actual apple store im ******) anyway I brought it in several times and they told me that they first replaced the logic board then the they replaced the screen(which was obvious) and they told me they replaced the ram( they did and they downgraded my ram in the process i went in with 4gb of DDR3 @ 1333 mhz and came out with 2 GB of DDR3 @ 667 mhz thanks you lebanese cocksuckers) i made them fix their ram switch which they weren't too happy about and immediately lied to me and told me that there was no problem and that they didn't put different ram in. Then they told me that there was nothing they could do and they couldn't even find the problem i was discribing. since it happens randomly everytime i brought it in to show them how it wouldn't start up or it would turn off randomly it miraciously worked fine. ******* apple, I'm going to call them and demand that they prepare a complete replacement which the lebanese guy told me was impossible, they would not replace the whole macbook just because i had a problem. I too upgraded to mountain lion to try and fix the issues, i then reformated my macbook and downgraded to snow leopard and still the issue remains. *** are we supposed to do this is a chronic issue with many many macs and apple hasn't yet come up with a solution to a problem THEY caused.

Maybe you are looking for

  • Report Server giving error http404

    roblem with Report Server : I have installed report server and i am using CGI not web cartridge.I have followed all the stpes of installation and when i call report through URL,I am getting following error : HTTP-404 File not found The URL is, http:/

  • 2 ipods (4th & 5th generation), 1 itunes, different software

    Yikes! I had a 4th generation click wheel 20gb ipod (black & white) that started acting up. After looking around these forums, I decided the hard drive was dying so I bought a new ipod (5th generation 30gb with video). Suddenly my old ipod came back

  • I have trouble seeing the small icons for the program functions in this tutorial.

    Hello, I have my assets from an older site, and want to start a site desktop site in muse. Is there a program ( maybe a book ) that can walk me through this step by step, instead of the Katie's Cafe demo / tutorial? The problem with the tutorial is i

  • Jump drive items not displayed in bridge cc

    error message when trying to open jump drive images in bridge cc: "item could not be displayed, may have been moved or renamed." this is a new pc.

  • How 2 find ORAOPS10.dll in a 64 bit version

    We have a .net application developed on 32 bit using odp.net to communicated with our database. When we deploy the application on a 64 bit server with a Oracle 10 Client Installed we get an: unable to load dll 'oraops10.dll'. We tried copying the fil