T410 - recovery files not found
Hello all,
I'm trying to restore my T410 to factory state, but when I go through the steps (thinkvantage button at startup), i'm eventually told that it can't find the recovery files. There is a system_drv partition on the drive - is that the recovery partition?
I think I created recovery media a long time ago, but they got lost during a house move.
Any ideas about what I might do?
Thanks...
Hi,
System_DRV partition includes ms recovery environment (WinRE) and Lenovo R&R components. Recovery files (image .wim archives) are stored on the Lenovo_Recovery partition (assigned as Q: ). Perhaps you perfomed some actions with partitions or installed yet another OS.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español
Similar Messages
-
error 13.11 Source file not found verify that the file exsist
Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
[Solved] grub2: file not found but booting fine
I just ran grub-mkconfig to update my grub.cfg because I installed E4rat. But now I have a problem: Every entry in grub2 can be booted and E4rat really boosted my boot process so actually everything is fine. But while grub2 is loading it says something like:
Grub 2 is loading...
Welcome to Grub 2!
error: file not found.
error: file not found.
error: file not found.
Now grub shows up and everything is as it should be. When I select Arch it again says "error: file not found." three times and continues with a normal boot process. So basically it's nothing that would brake my system but something seems not right and that's just a huge annoyance.
Here's my grub.cfg just in case:
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
set menu_color_normal=light-blue/black
set menu_color_highlight=light-cyan/blue
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 --hint='hd0,msdos5' f7960d1a-77ab-4230-ab43-ff931f0b2175
else
search --no-floppy --fs-uuid --set=root f7960d1a-77ab-4230-ab43-ff931f0b2175
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=1440x900x32
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_GB
insmod gettext
fi
terminal_input console
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 --hint='hd0,msdos5' f7960d1a-77ab-4230-ab43-ff931f0b2175
else
search --no-floppy --fs-uuid --set=root f7960d1a-77ab-4230-ab43-ff931f0b2175
fi
insmod png
background_image -m stretch /boot/grub/archlinux.png
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux GNU/Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-f7960d1a-77ab-4230-ab43-ff931f0b2175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 --hint='hd0,msdos5' f7960d1a-77ab-4230-ab43-ff931f0b2175
else
search --no-floppy --fs-uuid --set=root f7960d1a-77ab-4230-ab43-ff931f0b2175
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=f7960d1a-77ab-4230-ab43-ff931f0b2175 ro init=/sbin/e4rat-preload quiet loglevel=3 logo.nologo console=tty1 splash=silent,fadein,fadeout,theme:arch-black
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
menuentry 'Arch Linux GNU/Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-f7960d1a-77ab-4230-ab43-ff931f0b2175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 --hint='hd0,msdos5' f7960d1a-77ab-4230-ab43-ff931f0b2175
else
search --no-floppy --fs-uuid --set=root f7960d1a-77ab-4230-ab43-ff931f0b2175
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=f7960d1a-77ab-4230-ab43-ff931f0b2175 ro init=/sbin/e4rat-preload quiet loglevel=3 logo.nologo console=tty1 splash=silent,fadein,fadeout,theme:arch-black
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry 'Windows 7' {
set root='(hd0,1)'; set legacy_hdbias='0'
parttool "$root" boot+
chainloader '+1'
### END /etc/grub.d/40_custom ###
And my /etc/default/grub:
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch Linux"
# Default:
#GRUB_CMDLINE_LINUX_DEFAULT="quiet"
# Splashy boot:
GRUB_CMDLINE_LINUX_DEFAULT="quiet loglevel=3 logo.nologo console=tty1 splash=silent,fadein,fadeout,theme:arch-black"
GRUB_CMDLINE_LINUX="init=/sbin/e4rat-preload"
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
# GRUB_GFXMODE=auto
GRUB_GFXMODE=1440x900x32
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep
GRUB_BACKGROUND="/boot/grub/archlinux.png"
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
GRUB_COLOR_NORMAL="light-blue/black"
GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
I haven't updated my grub.cfg in a while because there was no need to.
Thanks in advance for advices.
Last edited by retzu (2012-04-16 14:16:02)I have the same error message as in the first post. "error: file not found" listed three times when I first choose Arch from the Grub2 menu. The solution linked to by the.ridikulus.rat would not seem to apply as I do not have the locales en* in /boot/grub/locale BTW, I am in the US. The system does boot though.
I just fixed this a few seconds ago and was going to post how, basically I just did "cp /boot/grub/locale/[email protected] /boot/grub/locale/en_US.mo" which seem to do the trick, the reason I didn't fix this sooner is the error only stays up for a very small fraction of a second making it hard to read.
# ls /boot/grub/locale
ast.mo da.mo fi.mo hu.mo it.mo nl.mo ru.mo uk.mo zh_CN.mo
ca.mo de.mo fr.mo id.mo ko.mo pl.mo sv.mo vi.mo
EDIT: I get the same three "error: file not found" messages when I boot Fedora (a multiboot system). This is with grub2 installed from Arch Linux.
Last edited by David Batson (2012-05-02 20:03:41) -
Solaris 10 boot error 15 file not found
During a reboot to one of our solaris 10 servers when it reboots it comes up with this error message
Findroot (pool_rpool,0,a)
Filesystem type is zfs, partition type 0xbf
kernel$ /platform/i86pc/multiboot -B $ZFS-BOOTFS
loading '/platform/i86pc/multiboot -B $ZFS-BootFS' ....
Error 15: File not found
press any key to continue...
The grub file menu.lst content is as follows
#pragma ident "@(#)menu.lst 1.2 10/06/11 SMI"
default 0
timeout 10
# Uncomment the following line to enable GRUB splashimage on console
splashimage /boot/grub/splash.xpm.gz
#---------- ADDED BY BOOTADM - DO NOT EDIT ----------
title Oracle Solaris 10 1/13 s10x_u11wos_24a X86
findroot (pool_rpool,0,a)
kernel$ /platform/i86pc/multiboot -B $ZFS-BOOTFS
module /platform/i86pc/boot_archive
#---------------------END BOOTADM--------------------
#---------- ADDED BY BOOTADM - DO NOT EDIT ----------
title Solaris failsafe
findroot (pool_rpool,0,a)
kernel /boot/multiboot -s
module /boot/amd64/x86.miniroot-safe
#---------------------END BOOTADM--------------------
During a shell session using a recovery disk i mount the rpool to /a , if I do a zpool status it comes back that rpool mirror-0 with both disks are online
rpool ONLINE
mirror-0 ONLINE
c0t0d0s0 ONLINE
c0t1d0s0 ONLINE
However if I do a zpool import it shows
rpool UNAVAIL insufficient replicas
mirror-0 UNAVAIL insufficient replicas
c0t0d0s0 FAULTED corrupted data
c0t1d0s8 UNAVAIL corrupted data
This is highly confusing
Any help would be much appreciatedWhat's confusing to me is that the second disk in this mirrored root pool shows c0t1d0s0 in one output and c0t1d0s8 is another output. I hope this is a typo. Otherwise, you need to find out why this device path changed. Its look like the primary disk is faulted. FMA will tell you if the disk is faulted and whether the second disk's device path changed. You will have to boot from media or an install server.
Thanks, Cindy -
Hi There,
i have a Problem about a cfm-Script that use a ini-File to
connect to my MS-SQL 2000 Server.
We have here a productive System with Windows 2000 CF 4.5.1
SP1 with MS-SQL 2000 (SP4) and IIS 5. We plan to move all Content
to an newer Hardware on Windows 2003 Server.
Once ive installed a Windows 2003 Server with CF MX 7 Trial
and MS SQL 2000 (SP4) an IIS 6.
My Script use an ini File to Connect to my MS-SQL 2000 Server
on the local Machine. When i start the Script there prompt an error
about "e:\inetpub\wwwroot\mysite\upload\upload14964.txt from {ts
'2006-06-28 11:48:00'}
/ INI-File not found!"
In the Script it looks like that:
quote:
<cfx_mysiteImport
IniFile = "e:\inetpub\wwwroot\mysite\renet.ini"
ImportFile = "#physName#"
error = "errimport"
uploadid = "uploadID"
>
Does anyone have an idea to resolve this Problem?
Best regards
Olli
ps.: maybe i can post the complete source ...lhood7214,
I understand that the Recovery disks came with the notebook, and they are not allowing you to do the recovery. Again I suggest contacting HP support and explaining the issue. They should be able to assist you in obtaining Recovery material that will work.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
"BIOS ME update....file not found " since a P67A-GD65 bios update failed
Hi everyone,
I've decided to post this little message after looking for a solution over the web and over the MSI forum because I've got a problem since the BIOS update of my P67A-GD65 MB.
I've followed the update process for the 4.32 BIOS using an USB key, the update started but did not continue after reboot, and since My PC is out of order
The "BIOS ME update....file not found " message is displayed after lots of booting tries, using plenty of methods.
I've looked and tried all the techniques I could find over the web, I've tried :
-PC with and without SATA drives connected
-the last 4 versions of the bios found on-line, even the original version of my MB before updating (1.19)
-4 different usb keys (from 128 Mb to 4 GB)
-all front and back usb ports
Each time, on each usb key, there were several bios versions, even one renamed to AMIBOOT.ROM for testing the recovery method.
I've also tried to make the keys bootable by using the “MSIHQ USB Bootable” tool with the 1.19 bios (after the boot fix), the usb key appears in the F11 boot menu but when I select it, the PC boots but still shows me the "BIOS ME update....file not found " message.
I've also tried a clear CMOS with several power off.
I've also tried to burn a CD containing only a AMIBOOT.ROM file, and to boot on it, but same problem occurs.
In brief, it seems that my PC does not recognize my Key's content, whatever it is.
I've you got an idea to help me ?
Last precision, the update process that failed was using the 4.3 bios version, but my CPU is a not an IvyBridge .
thanks for your helpHI
I've tried with your file , that's better but not solved
the "BIOS ME update....file not found" has gone but my bios is still inacessible.
I put the usb key (with the decompressed file) and the PC starts, displays the MSI boot logo, and then shows a message for hitting F1 or F2 bla bla bla...
Whatever the key that has been hit (F1 or F2, and only the first time), the pc boots again and again after displaying the boot logo, followed by a 30 seconds black screen.
If I remove the key, I've got a message that says I have to put a key on an usb port, and when I put back the usb key , the PC starts to boot again and again.
Once again , I'm stuck.
thanks for your help -
PH61A-P35 (B3) bios update..........file not found
Hello, ihave problem. I tried to update BIOS, so download bios file, unzip to flash drive, execute bios file on flash drive, and after only wait and system restart. But when he started i can read only red inscription "BIOS Updating ________________ File not found."
Is here any chance to recovery old bios or even bios update?
Please help me, i am very disappointed :(
thanks very much.Recommend to give the forum's USB method a try;
>> Forum USB Method << -
JBO:33001 bc4j.xcfg file not found in class path
Hi,
I am yet another victim of the age-old error JBO:33001 bc4j.xcfg file not found in class path, When i have my BC4JApp.jar in Tomcat Web-inf/lib directory. All the other jar files and class files in my webserver-application web-inf classes and lib directory works.
But Tomcat server is not able to read this bc4j.xcfg file. I can see in my jar file that this bc4j.xcfg exists and in the specified package directory. still the problem persists. My BC4JApp.jar is perfectly working when i use JDeveloper. but not when i use tomcat4.0 and call a JSP using BC4JApp.jar from browser (My environment is Jdeveloper3.2, Tomcat4.0+IIS in middle tier and oracle 8i as DB, everything on windows2k)
I have gone through almost all the threads possible that relates to this error in this form. None of them have a answer except to say "put the file in classpath". and last reply is "will fix in jDeveloper 9i. So what happens to us who are working in Jdeveloper 3.2?
1. I have this file in my jar file.
2. I also tried creating a seperate directory manually, with the same name as my package under web-inf/classes, web-inf/lib , just under web-inf directory and atlast under approot directory also. I tried having my package directory containing bc4j.xcfg in these folders one at a time and also tried having this directory in all these folders at the same time.
Still no solution.
Itz frustrating that neither proper documentation nor a right url page nor i am aware of available addressing this. page links given in above threads only gives me the wonderful page of ie's "Page cannot be displayed".
Is there a answer to this error and my problem. If this doesn't work, then i have to all the way develop from scratch creating my jsp using JDBC calls and Stored packages etc.
I don't want to give up on this Jdeveloper at this final moment because if this bc4j.xcfg file is found, my application will work perfectly. on these final moments, if this doesn't work, i am frightened to imagine to develop my application in standard way. Atlast, if thatz the option left,we have to do that bcos our production date is close by.
Please can some one in this forum or Jdeveloper help me to solve this problem. I am desperate and very urgent.
Waiting for a reply from Jdev team very much...
( I just posted in the other thread which is pretty old, dated backto May 2001, which was relevant to this error. Just to make sure it is noticed, I am posting it seperately too)
Thanks
Hari(2/3/02)Hi All,
For those who are following this thread, I got a solution for this error with the help of Jdev Team.
This solution may work, if you have deployed your application in Tomcat4.0.1. This is the environment in which I work and tested.
As you may be aware, Tomcat ignores value in CLASSPATH variable.
To see any files that are existing or newly deployed, it has it own way of detecting it.
Addition information on Tomcat working, you can follow this link,
http://jakarta.apache.org/tomcat/tomcat-4.0-doc/index.html
Coming to point, Tomcat has got five classloaders and each classloader invoked, looks in their related directories for files in following order.
1. /WEB-INF/classes of your web-application
2. /WEB-INF/lib/*.jar of your web application
3. BootStrap classes of your JVM (Tomcat's $JAVA_HOME/jre/lib/ext)
4. System class loader classes($CATALINA_HOME/bin/bootstrap.jar,CATALINA_HOME/lib/tools.jar)
5. $CATALINA_HOME/common/classes
6. $CATALINA_HOME/common/lib/*.jar
7. $CATALINA_HOME//classes
8. $CATALINA_HOME/lib/*.jar
So All your individual application related files should be deployed in your application's WEB-INF/classes or WEB-INF/lib directory accordingly.
If your application files are unpacked, they should be deployed or copied under WEB-INF/classes directory
if the files are within a jar, they should be under WEB-INF/lib directory.
If your Jar-files contains bc4j components, then those jar files should be deployed under WEB-INF/lib directory. Also,do the next step to copy all relavant BC4J runtime libraries under lib directory.
IMPORTANT: Please remember to copy and paste all the required BC4j runtime libraries in the Same WEB-INF/lib directory along with your application jar files. This is the real reason which can solve this JBO:33001 to disappear. It worked for me.
To configure your directory for tag-lib uri's, use web.xml to set the taglib-uri attribute.
Put your web.xml and DataTags.tld in the WEB-INF directory.
Your simple web.xml may look like as follows.
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<taglib>
<taglib-uri>
/webapp/DataTags.tld
</taglib-uri>
<taglib-location>
/WEB-INF/DataTags.tld
</taglib-location>
</taglib>
</web-app>
You may then modify this web.xml to suit further requirements of your application.
Remember to stop and restart the Tomcat Server (service) by using shutdown and startup scripts after updating any jar files/class files/ JSP or source files deployed in Tomcat.
Sometimes, only this helps even though your context's reloadable attribute is set to true in Tomcat Server's server.xml file.
Hope this above information helps you to solve this error in Tomcat environment. My Sincere thanks once again to Juan and Jdev team for their help and efforts to solve this problem.
Thanks
Hari -
Error on WWI server EHS_GLM_GENSERV: Results file not found on production
Hi Experts,
I need some help/advice. We have issues with our new EH&S WWI server.
This new setup working OK with Dev and QA (the WWI and GLM part is just fine), We did try to link this server to production then it gives below error.
Only difference between existing WWI QA and production server is that
Existing QA and development WWI server installed at location C:\Program Files (x86)\EHS\WWI
And Same path maintain on new server C:\Program Files (x86)\EHS\WWI
But existing production WWI server installation path is different C:\Program Files\EHS\WWI
So is there any customizing changes required from SAP side to avoid this error on production
Can you please advise on this.
================================================================================
Error on WWI server EHS_GLM_GENSERV: Results file not found
Message no. C$830
Diagnosis
The results file of the generation was not found on the WWI server EHS_GLM_GENSERV.
System Response
Generation was not carried out.
Procedure
Advise your system administrator to check the WWI installation on the WWI server EHS_GLM_GENSERV.
Check the Windows event log on the WWI generation server. The event log may contain other error messages.
SAP Note 1058521 provides possible solutions for this error.
==================================================================================
Log shows
============================================================================================================================================
E000 Error: OLE Exception (-2146823114) from Word8_OpenDoc (docs.Open) by Microsoft Word: This file could not be found. (C:\Windows\...\r00000000000001422051.rtf) (HRESULT Code:5174)
E000 Error opening document (Word8_OpenDoc: Documents.Open failed)
================================================================================================================================================Hello Gajanan,
the path of the temporay workfolder can be configured in the IMG. Often this path is setup as the WWI server installed location but it is just a temporay workfolder which must exist on the WWI server. The path can be configured under:
For ECC 6.0 Ehp 0-2 and lower
Environment, Health and Safety -> Basic Data and Tools -> Basic Settings -> Specify Environment Parameters
For ECC 6.0 Ehp 3-6
Environment, Health and Safety -> Product Safety -> Global Label Management -> Make Settings for Basic Data
For ECC 6.0 Ehp 7
Environment, Health and Safety -> Global Label Management -> Set Basic Data and Tools for Global Label Management -> Make Settings for Basic Data -
I have lightroom 5.7 and a macbook pro 10.9.5. Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work. There is no "exclamation" icon below the histogram box in the Library module or on the photo in grid view, and the histogram is gone. What is going on? Trying to find it using the "find missing photos" in the library menu does nothing.
-
I have been having a problem for quite some time with iTunes and I can't seem to get an answer as to how to resolve it. On many of my songs listed in the iTunes library, when I click on the song I get an error message to the effect of "File not found. Would you like iTunes to try to locate this file?", and when I say "yes" to this, I get my "iTunes Music" folder (where my music files are stored) and I have to search around and find the file (which I am usually able to do) and then it plays. However, when sometime later I may try to play the song again, I get the same error message and have to go through the same process. Can anyone explain why this may be happening and how I can prevent it from happening again? What is the simplest way to store your music files on your hard drive to ensure iTunes captures everything and does not have difficulty locating files? Many thanks for your help and advice!
This really shouldn't happen. There are no setting in iTunes to prevent it.
If you want to do a bit of detective work, you find out where iTunes this the missing file is located.
If you want to try this, identify a track or two with exclamation marks.
Open iTunes Library.xml with WORDPAD. (it's in the iTunes folder)
Use search to look for the track or album name. If you know the actual file name you can use that but watch out for spaces, the space character is represented by %20.
WHen you have found a track or album you need to scroll to the line starting:
<key>Location</key>
This contains the path and file name.
Is it correct, or something different?
That might give you clue about files being moved or renamed.
If it is all correct them something odd is happening with iTunes.
Message was edited by: polydorus -
Why am I getting File not Found alert when I type into my browser?
Why do I keep getting a File not Found alert when I type into my browser?
I have been using firefox for about 4 yrs now with very few problems. The problem I am having is that when ever I go to type in anything into my browser I keep receiving this message:
(Scroll down to see the rest)
File not found
Firefox can't find the file at jar:file:///C:/Program Files (x86)/Mozilla Firefox/omni.jar!/chrome/en-US/locale/browser-region/region.propertieschronic+fatigue+syndrome.
I recently installed Firefox 5.0 and this keeps happening. It happened with the 4.0 version a couple of days ago but mostly it is the 5.0 version that I am having problems with. When ever I want to do a search I have to manually type in google.com. Is there a solution to fix this?The NuGet is a dll that was built with 4.0.0.0. The easiest thing to fix problem is target you VS project to use Net 4.0. You could get a new version of NuGet, but if you do make sure you rebuild your entire project. The dependencies in
the VS compiler doesn't always recognize updated libraries. So I normally rename the bin folder in the project and then delete the bin folder. VS will create a new bin folder and then rebuild all the source files. If your project contains
multiple projects then remember to delete the bin from all projects.
jdweng -
Cannot delete file error -43 file not found
I cannot find and/or delete a file. The error is -43 file not found. It prevents me form making a backup with carbon copy.
The file was in applications / illustrator / legal / strangecharacters.html (now in trash) and size 112kb.
I am the admin of the machine on OSX 10.4.8
I have read & write permissions
Owner og the file is system.
I cannot change the filename: Unexpected error code -43!
I cannot change owner: Unexpected error code 213!
I cannot drag the file out of the containing folder i.e. legal (i get grayed stop icon instead of the expected green plug icon at the mouse pointer).
I can drag the legal folder around i.e. to the trash.
I can not delete the folder and its contents with empty or secure emtpy trash.
I tried:
Repairing privileges. Nothing to repair, all is well.
Rebuilding Locate Database but got 'cannot find the file code-43' while the folder was still in its original location: applications / illustrator /
I logged out and back as admin and different user.
I restarted.
I tried to delete the file via Terminal with rm and with command below as suggested by apple technote. The result is not as desired:
% chflags -R nouchg /Users/macuser/.Trash/Legal\ 22-06-59/Tie\314\202\314\201ng\ Vie\314\202\314\243t.html
chflags: /Users/macuser/.Trash/Legal 22-06-59/Tiếng Việt.html: No such file or directory
I started up from a different volume and tried the above.
Anyone?as in my previous post, i found that part of my hard drive directory was corrupt. .ie. short version: there was a discrepancy between what the directory knew to be on the disk and what the finder showed me...
so i did a startup in single mode (command-s) and type fsck -fy at the prompt to do a disk repair. took aout three runs and 20 minutes but after that i got the desired message: disk appears to be ok. i typed reboot which restarted the machine. i then ran disk utillity repair privileges.
everything now is fine.
note: working with bluetooth keyboard and mouse in single mode worked on my G5 (not sure though if this applies to all models), also fans make a lot of noise, like your machine is about to take off... dont worry)
hope this helps
G5dual Mac OS X (10.4.5) -
How to embed audio to my website using quicktime when I get "file not found
hi,
i've been trying to embed audio into my website all night and I get a file not found message even though I;ve checked 100 times and all files are where links say they should be..
but even just linking to audio (mp4) files won't work...
everything is o.k. with non-audio links on my website - only the mp4 audio can't be found.
can anyone help me? or post the correct code?
I've tried using these formats..
<EMBED SRC="anymovie.mov" HEIGHT=176 WIDTH=136>
<embed
src="http://www.crossandthrone.com/.samples/qt/sample-reference2.mov"
width="242" height="199" autoplay="false" loop="false"
controller="true" bgcolor="#666666"
pluginspage="http://www.apple.com/quicktime/"></embed>
the pages that should play audio just have a quicktime file with a question mark on them
help would be much appreciated!Start here:
http://www.mediacollege.com/video/streaming/
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"subdued2u" <[email protected]> wrote in
message
news:gbg2th$r13$[email protected]..
> Hello ,guys, i have a website,, and i would like to add
upload vidoes on
my
> website i have tried but did not work can anyone please
tell me how to
embed my
> videos in my website using dreamwever ?
> thank so much
> -
Removing warning for "Default CSS file not found."
I am getting this warning in Flash Builder:
"Default CSS file not found."
I can not for the life of me figure out how to get rid of it. Any suggestions?Default css file can be specified as a compiler option (per SWC, I think).
See http://livedocs.adobe.com/flex/3/html/help.html?content=compilers_14.html
For example, flex framework has a default CSS file: C:\Program Files\Adobe\Adobe Flash Builder 4\sdks\3.5.0\frameworks\projects\framework\default.css
Do you have some library project or a swc with default css file option turned on, but the css file is missing?
Maybe you are looking for
-
Simple XML to Text onversion using XSLT and Java?
Hi all! I'm completly new to using XSLT and Java and are trying to convert a XML file into a ordinary Textfile that I am gonna import into another application. I started up writing a ordinary XML parser in Java which interpreted the XML file, but rea
-
Changing duration of 100's of still images
I have over 300 photos I want to make a "Ken Burns" slideshow with. But I want each photo to display only for 2 seconds, and not the default 5 seconds. Is there an easy way to globally tell iMovie to make all my stills 2 seconds? The thought of indiv
-
Running out of HD space, iDisk space---deleting backups??
I'm relatively new to Mac, and have been happy with my MBP. But it has become slow and a little bumpy in it performance in the last couple of weeks. When I try to backup my Home Folder to iDisk, I get an error message saying not enough room in iDisk.
-
Mac Pro 8-core Power Supply Making Humming Noise That Comes And Goes
This is in reference to a Mac Pro 3,1 8-core purchased around Feb 2008. Lately, I've noticed a strange noise coming from my power supply that sounds like the noise a refrigerator radiator makes. It's a humming noise that rapidly comes and goes, const
-
Can you help me?