T410 reinstallation fails after loading some windows optional updates

Reinstalling a Thinkpad T410 Windows 7 Pro 64bit: all is fine through Windows 7 SP1, then all Thinkpad (Thinkvantage) drivers and then all the Windows security patches (to October 2013).
HOWEVER loading some optional windows updates ( Bluetooth), or Windows .Net, or some of the other optional updates result in -get this- any keyboard entry freezing the currently active application it is meant for.
All other applications open and work fine as long as only the mouse is used. A keyboard entry only freezes the application it is meant for. I once succeeded in having Google respond by entering a VOICE search item, but could never cut and paste ( -> keyboard entry!) into a Google search or any application
Some other clues: rolling back (windows restore points) sometimes but NOT always return to a machine in good status. And starting in safe mode, the problem disappears. I have not had the patience to figure out which service /driver is causing the keyboard glitch. Will be ignoring these optional updates for now, but it would be good to know the reason this is happening ( a strange combination of drivers / inappropriate order loading updates? )
Asus LG5, Toshiba M3, HP nc4400, Thinkpad R50, T60, T61, T61p, X200 Tablet, T410, W500, T430s

Since you deselected IIS & Tomcat, it sounds like the links defaulted to Tomcat (port 8080). WACS requires IIS to run and port 6405 is what WACS listens on. You have a couple options.
The easy solution would be to find the file:
C:\Program Files\Business Objects\Tomcat55\bobjsetup\administrator_guide
Right click on the shortcut file and change it to point to:
http://localhost:6405/CmcApp/help/en/administration/html/default.htm
Another option would be to uninstall and then do a full install rather than a custom install. Let it install Tomcat and if it detects IIS, it will configure that as well. Depending on how you plan to use the product, you may find yourself wanting to use Tomcat anyway. If you've already spent a lot of time configuring your current system and are ok with changing the links as above, that would be the easiest solution. Keep in mind, the latest revisions of the admin guide and other documentation can always be downloaded from Service MarketPlace.

Similar Messages

After loading the 1.1 update my nano turns off after 60 seconds. is there a fix for this?

After loading the 1.1 update for my nano ipod my nano shuts down after playing the music for 60 seconds. Is anyone else having this problem and is there a fix for it? Very frustrating to have to keep hitting the sleep/wake button and then play to make the music start again during my workout.

You have probably fixed the problem by now, but I also just bought a Nano and it was very frustrating with the music shutting off before the first half a dozen bars of the song. I rang Apple and they sent me this page.... (if anyone else needs help)
http://support.apple.com/kb/TS3700?viewlocale=en_US
All it was that I hadn't pushed the headphones in until they were flush up against the Nano.
Thanks Apple!

Why did AME stop working after the last Windows 7 update

AME suddenly stopped working after the last Windows 7 update. After the initial splash screen, I get a message saying that AME is not working and the program will be closed. Then I get the windows message that it is searching for a solution, then nothing. I am using the Production CS6. This happens whether I try to start AME directly, or queuing through Premiere Pro. I have tried reinstalling the entire package and have implemented all available updates from Adobe. I have no clue why this happened, but AME is crucial to my workflow.

Try to delete the following folders and then launch AME:
%AppData%\Adobe\Adobe Media Encoder
%AppData%\Adobe\Common
Make sure to first make a backup of those folders.

Lightroom 5.5 grid view fails to load some images. These do load in develop, then re-appear in grid. Re-installed 5.4 (after deleting 5.5, then emptying trash in 10.9.5) and it now exhibits same behavior. Suggestions?

These same images fail to load in slideshows; "loading" appears without the image ever appearing. I can export these grayed-out images and retrieve the image content in the exported file. Not being able to see all images in grid view is an inconvenience for sure; e.g., I can't review all the contents of a collection before posting it. This behavior didn't occur until I upgraded to 5.5. Now it has migrated back into 5.4, despite having selected 5.5 and emptying trash before the re-install.

Whoa this is happening to me...

On 6u13, new plug-in fails to load on Windows 2003 and IE7

I'm attempting to load an applet in IE7 with an OBJECT tag in Windows 2003. This is a mature product that has, for this release, moved from 5 to 6. The CLSID was changed from the CAFEEFAC one for any version of 5 to the one for any version of 6. Java 5 version worked fine on Windows 2003. Now, on some, but not all, of our 2003 systems the ActiveX control for the new Java Plug-in fails to load.
These configurations work:
- Windows XP and any Java and any IE
- Windows 2003 and Java5 and any IE
- Windows 2003 and Java6, old plug-in, and any IE
- Windows 2003 and Java6 and APPLET tag and any IE
This one doesn't...on some machines:
- Windows 2003 and Java6, new plug-in, IE7, OBJECT tag
This is not a security problem. If I turn off the new style plug-in in the control panel, it works. However, I'd really like to avoid doing this, as the new plug-in has much needed features. Also, the APPLET tag works where the OBJECT tag doesn't. I can implement this change if needed, but it would be fairly painful and I'd prefer to avoid it.
Does anyone know why this might be happening? Is there a good way for me to diagnose this? The browser is quite silent as to what the error might be.
I appreciate any help. This one is truly vexing me!

Okay, I'm wrong...I thought I could move to APPLET tags...I cannot. LiveConnect from JavaScript to Java does not support APPLET tags, only OBJECT tags. This makes my problem worse, as I don't have any recourse so far, except to disable the new plugin.
However, this did lead to a clue: disabling the new plugin caused it to work again. When the new plugin was re-enabled to see it fail again, much to my surprise, it worked! Does anyone know what flipping that option actually does? Registry change or something else?

RPC Remote calls fail after loading sibling.

Hi All,
Main loads an app compiled in 3.2. Cannot recompile legacy SWF with version of Main.
Main and Client are on the same domain. Debugging on localhost.
Sibling has RemoteObject code but never makes RemoteObject calls.
Main apps remote calls start failing after sibling is loaded.
TypeError: Error #1034: Type Coercion failed: cannot convert
mx.messaging.messages::AcknowledgeMessage@c7ab831 to mx.messaging.messages.IMessage.
<mx:SWFLoader id="swfLoader"
 loadForCompatibility="true"
 trustContent="false"
 width="100%" height="100%"
 source="ClientGuiApp3-2.swf?fredOn=false"
 complete="swfComplete();"
 creationComplete="initNestedAppProps();"/>
What I have done to try to fix it.
trustContent = "False" to put it in its own security domain.
I thought loadForCompatability good enough to make them use their own class definitions?
Document I found says RPC special case for multiversion Sandbox or Bootstrap.
http://help.adobe.com/en_US/Flex/4.0/html/WS2db454920e96a9e51e63e3d11c0bf69084-7f0c.html
loadForCompatibiity means sandboxing or new security domain for the sibling?
Thanks in advance,
Kevin

1. Remove the WinrmIIS Extension from "Programs and Features"
2. Reboot the server
3. Execute the cmd "winrm quickconfig". This adds an exception for the remote management in the Windows firewall.
4. Install "Winrm IIS extension
5. Try open Exchange Management Console
Let me know what happens :)
Thanks for your guide;
"WinRM IIS Extension" is not installed.and firewall is off.
When I open up the Exchange Management Console ,after these message :
<Initializing ...
Setting up Remote Powershell session to: ServerName.MyDomain.net ...>
I'm seeing these errors:
<The following error occurred when setting up Remote Powershell session to 'ServerName.MyDomain.net':
Closing remote server shell instance failed with the following error message : The WinRM client cannot complete the operation within the time specified. Check if the machine name is valid and is reachable over the network and firewall exception for Windows Remote Management service is enabled. For more information, see the about Remote Troubleshooting Help topic. >
also When I open up the Exchange Management Shell,After several hours the below message remain:
<VERBOSE:Connecting to ServerName.MyDomain.net >

Call Library Function Node 'Wrapper.Create': Library not found or failed to load. using windows 7 64 bits

Dear all
I try to interface my spectrometer (NIRquest from ocean optics) using labview on my 64 bits cumputer using windows 7.
I have absolutely no problem to run the spectrometer with the program dedicated to the spectrometer (called Spetrasuite).
I've installed "OmniDriverSPAM-1.66-win64-development-installer.exe" and everything went right.
When I select a VI in LabView (e.g."wrapper_create.vi") from the wrapper.llb, LabView returns an error :
"Call Library Function Node 'Wrapper.Create': Library not found or failed to load."
I chek the call library function, but everyting seems to be right :
I use LabView 8.6.1 and my others *.vi are running perfectly...
Do you have any idea from where does the problem comes ?
Thank you very much

Hello Flanguy,
In addition to smercurio_fc's feedback I can confirm that LabVIEW 8.6.1 doesn't exist in 64-bit version.
Officially, LabVIEW 8.6.1 doesn't support Windows 7 either.
The minimal version of LabVIEW you would need to both support Windows 7 and exist in 64-bit version is LabVIEW 2009 64-bit or any 64-bit versions which are more recent.
In the two links (1 & 2) you can find more background information.
Kind Regards,
Wouter
National Instruments Belgium

Encore CS5 fails to load in Windows 7

I have been using a trial version of Premier Pro CS5 and today paid up to get a S/N and registered. Premier loads fine and seems OK at first glance, but Encore CS5, which looks as if it came in the package, fails to load. It freezes at the loading graphic with the 'Initializing transcoding' apparently stuck. Is Encore not included in the package I paid for or have I missed something?

Well... this is what I found out and what I did to "fix" my problem. First my situation was that I had 2 drives, a lite-on blu-ray rom drive that was supposed to basically read anything, and a pioneer blu-ray burner. I was going to use the rom drive to do my reading and reserve the burner for just that, burning. What I found out, because Encore would freeze when loading, was that Adobe uses a Roxio routine to go out and get the information about all the drive in the environment to know how to use said drive(s) for this session. The Roxio routines hang in an endless loop, for me, on the rom drive. When I go into device manager and disable the rom drive, Encore loads just fine and I can master... whatever, and burn or create ISO images and go on my merry way. When done, I can re-enable the drive and use it as intended except for trying to use it in Encore.
This happens in CS3, CS4, CS5, and I think I tried it in CS5.5. Roxio never has "fixed" the problem.
My fix to fix the problem.. I replaced the blu-ray rom drive with another pioneer burner. Turns out the new drive was a newer version. So I moved the older version pioneer to the lower drive letter and use it as the reader drive for anything and setup the newer pioneer drive as my burner drive. Encore loads with both drives enabled, I can master anything, and eveything works fine. I've given up trying to have a rom drive for "just reading".
Also, given up testing to see if Roxio has ever "fixed" thier init routines for Encore. It always works this way with 2 burners on my system. One I use as a "reader" all the time which is also my backup burner and one as my "production" burner. And BTW, I usually build on ISO image with Encore and use Image Burn to burn my multiple copies output.
This is my "fix"!!

ADLink PXI fails after upgrade to Windows 7

Dear all,
Our ADLink 9846 PXI card does not work anymore after upgrading to windows 7.
After a reset of the system the Analog-Digital card sometimes measures one trace, after that it always gives a time out.
I installed all latest drivers and Labview(s), from ADLink (DAQPilot and DAQmaster) and NI, see attached screen shot.
The PXI-GPIB card works well. The ADLink expert says it all works fine in their lab.
What else (besides from downgrading to Windows XP) can I try?
Many thanks in advance for suggestions,
Willem
Attachments:
NImax.png ‏156 KB

I did not mention that the optical link (MXI-4) and the PXI-1031 are National Instruments.
That is why I was hoping someone at the forum might have experience with a similar setup.
regards,
Willem

All of my iMovie projects disappeared after loading Mavericks. The updated version of iMovie shows no files and cannot find any files to Import. My machine, a beefed up Mac Mini, has slowed to a crawl. Suggestions?

My Mac Mini takes forever to load programs now. After loading Mavericks it seems like I am back in PC World again!! My biggest concern is ALL of my iMovie projects seem to have vanished. I do not have sound on some web sites like YouTube. I lost the option to mirror from the Mac to the TV but I was able to solve that. Any suggestions on recovery of files? I do not use TimeMachine and did not back up anything before the Mavericks installation. I know...that's bad. Any suggestions would be greatly appreciated.
Here is what I am running:
Model Name:          Mac mini
Model Identifier:          Macmini4,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.66 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          8 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MM41.0042.B03
SMC Version (system):          1.65f2
Serial Number (system):          C07DV15PDD6L
Hardware UUID:          132F7FB8-1556-55D3-BF33-C1A5EFC69D12

My Mac Mini takes forever to load programs now. After loading Mavericks it seems like I am back in PC World again!! My biggest concern is ALL of my iMovie projects seem to have vanished. I do not have sound on some web sites like YouTube. I lost the option to mirror from the Mac to the TV but I was able to solve that. Any suggestions on recovery of files? I do not use TimeMachine and did not back up anything before the Mavericks installation. I know...that's bad. Any suggestions would be greatly appreciated.
Here is what I am running:
Model Name:          Mac mini
Model Identifier:          Macmini4,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.66 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          8 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MM41.0042.B03
SMC Version (system):          1.65f2
Serial Number (system):          C07DV15PDD6L
Hardware UUID:          132F7FB8-1556-55D3-BF33-C1A5EFC69D12

Firefox will not open and crashes after my lastest Windows 7 update on April 21st, 2015

After I completed the latest Windows 7 Update I have not been able to access Firefox. Upon opening the program I am given "Firefox has stopped working" message as the image shows. Never had any issues with Firefox before. I have Uninstalled and Reinstalled the latest Firefox version with the same results.
Please guide me to fix this problem
Adam

You can check if you can start Firefox in [[Safe Mode|Safe Mode]] by holding down the Shift/Options key.
*https://support.mozilla.org/kb/Safe+Mode
If you have submitted crash reports then please post the IDs of one or more recent crash reports that have a "bp-" prefix:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the Report ID of recent crash reports on the "Help > Troubleshooting Information" page (about:support).
*Click the "All Crash Reports" button on this page to open the about:crashes page and see all crash reports.
If necessary then you can open about: pages via the location/address bar.
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter
If you can't open Firefox, see:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Location_of_crash_reports
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Viewing_crash_reports
*https://developer.mozilla.org/How_to_get_a_stacktrace_for_a_bug_report

[ Solved ] R 2.7.2 fails to load some packages

Hi,
I was trying to install some R package from CRAN. For example "Hmisc" or "sp". Installation (through install.packages() ) was ok, but then ...
> library("sp")
Error in dyn.load(file, DLLpath = DLLpath, ...) :
impossibile caricare libreria condivisa '/mnt/data2/Rlib/sp/libs/sp.so':
/mnt/data2/Rlib/sp/libs/sp.so: failed to map segment from shared object: Operation not permitted
Errore: caricamento pacchetto/namespace fallito per 'sp'
> library("tripack")
Error in dyn.load(file, DLLpath = DLLpath, ...) :
impossibile caricare libreria condivisa '/mnt/data2/Rlib/tripack/libs/tripack.so':
/mnt/data2/Rlib/tripack/libs/tripack.so: failed to map segment from shared object: Operation not permitted
Errore in library("tripack") : .First.lib fallita per 'tripack'
Other packages were successfully loaded, such as:
> library("RUnit")
> library("RColorBrewer")
Any hint/clue on what's happening? Anyone else using R out there?
domanov
Last edited by domanov (2008-10-20 01:05:06)

Allan wrote:
I have no problems...
> R CMD INSTALL sp_0.9-26.tar.gz
> R
> library("sp")
>
You probably just need to rebuild it against the current version of your system libraries.
Yo, nevermind, it was my fault. As you probably saw in my first post, I installed the R packages as normal user (not root) in a partition mounted as /mnt/data2. I just had to add 'exec' to that partition's fstab entry, remount, and the problem was solved. My bad: I've lost 2 hours trying to figure it out (complete reinstallation of R and of a bunch of packages, which is not so fast on my old machine).
Bye, happy useRs!

Some CNAME DNS queries fail after latest 10.6.5 update

Right after rebooting from the latest MacOS X update I noticed some DNS queries are failing. These happen to be DNS queries for CNAME records. Other computers in the same network are not affected by this problem, including Mac's to wich the update was not yet installed.
Here are the simple diagnostic steps:
snowboard:~ pmsjt$ nslookup imap.texair.net.
Server: 192.168.0.14
Address: 192.168.0.14#53
imap.texair.net canonical name = taz.warner.local.
Name: taz.warner.local
Address: 192.168.0.12
snowboard:~ pmsjt$ ping imap.texair.net
ping: cannot resolve imap.texair.net: Unknown host
snowboard:~ pmsjt$
snowboard:~ pmsjt$ ping taz.warner.local
PING taz.warner.local (192.168.0.12): 56 data bytes
64 bytes from 192.168.0.12: icmp_seq=0 ttl=64 time=2.818 ms
64 bytes from 192.168.0.12: icmp_seq=1 ttl=64 time=2.211 ms
64 bytes from 192.168.0.12: icmp_seq=2 ttl=64 time=1.425 ms
64 bytes from 192.168.0.12: icmp_seq=3 ttl=64 time=2.242 ms
64 bytes from 192.168.0.12: icmp_seq=4 ttl=64 time=4.882 ms
64 bytes from 192.168.0.12: icmp_seq=5 ttl=64 time=3.190 ms
^C
--- taz.warner.local ping statistics ---
6 packets transmitted, 6 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 1.425/2.795/4.882/1.083 ms
snowboard:~ pmsjt$

Just as a sanity check, the second portion of the clause from the KB article doesn't apply in your situation, does it?
Additionally, Mac OS X v10.6 automatically detects when the local network operator has set up a name server that will answer name requests for a domain ending in ".local". It does this by checking to see if there is a Start Of Authority (SOA) record for the top level domain "local", which is how a DNS server indicates that it claims to have authority over a part of the DNS namespace. As long as the DNS server is properly configured with the required SOA record, Mac OS X v10.6 will detect this SOA record and automatically use this server to look up all host names in the domain.
Also, if you have time, you might want to check what mDNSResponder is actually doing by enabling logging; the man page describes the process in more detail:
LOGGING
There are several methods with which to examine mDNSResponder's internal state for debugging and
diagnostic purposes. The syslog(1) logging levels map as follows:
Error - Error messages
Warning - Client-initiated operations
Notice - Sleep proxy operations
Info - Informational messages
By default, only log level Error is logged.
A SIGUSR1 signal toggles additional logging, with Warning and Notice enabled by default:
% sudo killall -USR1 mDNSResponder
Once this logging is enabled, users can additionally use syslog(1) to change the log filter for the
process. For example, to enable log levels Emergency - Debug:
% sudo syslog -c mDNSResponder -d
A SIGUSR2 signal toggles packet logging:
% sudo killall -USR2 mDNSResponder
A SIGINFO signal will dump a snapshot summary of the internal state to /var/log/system.log:
% sudo killall -INFO mDNSResponder
http://developer.apple.com/library/mac/#documentation/Darwin/Reference/ManPages/ man8/mDNSResponder.8.html
I suspect in this case packet logging might be most informative.

BootCamp fails after installation of Windows 7 Ultimate 64bit

So guys , as we know loads of people had same issue i been searching it for whole day and couldnt get any answer. First i have installed Windows XP home 32bit sp3 whole computer worked like charm. Today i have deleted xp did re partition installed Windows 7 Ultimate 64bit success but for some reason there is not Sound. no iSight and no wifi red light on sound jack. and boot camp is not working.Really can some1 help ?

thanks for replay but i dont have 3.0 i have 3.1 allready in DVD
btw : i forgot to say i have installed Nvidia remotely but not starting with windows and i did everything that i can to install but i will uninstall bootcamp and will download 3.0 then 3.1 as you said.
Thanks
Message was edited by: Mamuq

Installation fails after extracting files, Windows Vista.

i downloaded the firfox 9.0 on my laptop with windows vista. when i click on the installed file, it runs an extraction but however does not do anything after extraction. there is no pop-up, no process running, the installation just stops and i have to do the extraction again which results in similar issue.

i tried doing that, doesn't work for me...have tried disabling windows firewall, antivirus everything...still can't get thru..

T410 reinstallation fails after loading some windows optional updates

Similar Messages

Maybe you are looking for