T410 running Windows 7 not detecting HP LP3065 connected with DisplayPort to DVI Dual-Link

I am running Windows 7 on a Thinkpad T410. I have an HP LP3065 monitor connected to it using an Accell DisplayPort to DVI Dual-Link adapter. Windows 7 does not detect the monitor. The NVIDIA drivers are up to date and I have tried powering the Accell adaptor with multiple USB ports. I do not know if there is a problem with the adaptor or if Windows 7 is just unable to see the monitor with this combination.
Could someone please let me know how I can diagnose this? Thank you in advance.

Similar issue: my T410 does not detect LG W2343T-PF (1920x1080) connected with DisplayPort to DVI Dual-Link Cable
T410 with integrated graphics
Type: 2516
BIOS: 1.09 (2010-01-07)
Embedded Controller: 1.03
Windows7 Pro x64
drivers are up-to-date with Lenovo
the same DP to DVI Dual-link cable was able to connect to Dell 1280x1024 monitor in my office.
Maybe I should used single link DVI cable.
I will do more testing this evening
(1) to test the connection on difference 1280x1024 monitor this evening at my home
(2) try different cable - something link DP to DVI Single-link cable
Meanwhile, just want to check others experient working with DisplayPort on T410/T510 as I really need to use dual external mornitor with my T410.

Similar Messages

I have downloaded itunes, however everytime I open it up deos not detect my internet connection even though it is running?

I have downloaded itunes, however everytime I open it up deos not detect my internet connection even though it is running. I can goto other sites when I open up explorer, but itunes just will not connect. Could someone assist? I have windows 7.

Set it up with SMB compliant names.. that means, short, no spaces and pure alphanumeric.
Set a different name for 2.4ghz and 5ghz..
Set security to WPA2 personal with pure alphanumeric password.. 10-20 characters is usually plenty.
Set wireless channel for 2.4ghz to manual and try channels 11, 6, 1 in that order.

I just purchased an Apple TV. I have a pc running windows 7. It is connected to a router and the router is connected to a wireless router. I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network

I just purchased an Apple TV. I have a pc running windows 7. It is connected to a router and the router is connected to a wireless router. I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network so the Apple TV can do home share.

I don't mean to be facetious but sometimes the simplest things are overlooked. To connect to your library you have to have the computer where the iTunes library is located running and with iTunes open. It also needs to be on the same network. My network is dual band and works with either stream but a friend of mine does not. He has to set the computer and the Apple TV to the same band. Hope this helps.

Keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling :(

keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling
I recently bought some new albums and can't play them on my ipod

I just encountered the same problem on my 2 month old MBPro. I found a work around by changing USB ports. As for the actual cause or the reason why that worked, I dont know. The USB port I was using works fine with my phone or other USB devices.

Adobe creative cloud desktop is not detecting my internet connection?

adobe creative cloud desktop is not detecting my internet connection?

i connected with the adobe people through 'contact an agent'.
very helpful, they remote managed my desktop to fix the issue.
apparently something to do with permissions not activated for adobe, not sure how and why this happens though, or why it was fine earlier and suddenly stoppped.
they insisted it was to do with being on a wifi connection but that's not possible because i have my laptop right next to my desktop and that was working fine.
it took about four hours to fix though, so be patient!

How do I run Windows software on my MacBook Pro with OS X Mavericks

How do I run Windows software on my MacBook Pro with OS X Mavericks? I want to run a TurboTax program to amend an old tax return. Program is not available for OSX.

Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

My samsung says video out from i pad is not supported. i am connecting with apple dock using hdmi. I do get the audio

my samsung says video out from i pad is not supported. i am connecting with apple dock using hdmi. I do get the audio any suggestions?

Jeffrey-
If the HDMI input to the Samsung is not compatible, does it have a VGA or composite input? I have both the HDMI and VGA adapters for the iPad, which work with the small Vizio HDTV I tried. I understand a composite video adapter is also available.
Fred

My apple tv3 is not powering on. Connected with Computer, with micro USB cable with power on, it is not shown in Devices. How to rectify

My apple tv3, serial no. C07JWBZ9DRHN is not powering on. Connected with Computer, with micro USB cable with power on, it is not shown in Devices. How to rectify

You have to remove all cables before connecting to your computer with micro usb. Power is only connected when using a 3rd gen device and done after the initial connection.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

The clock on my ipad seems to be stuck? Could this have anything to do with my not being able to connect with FaceTime ?

The clock on my iPad seems to be stuck ? Could this have anything to do with me not being able to connect with FaceTime ?

In order to backup to iCloud the iPad must be plugged into a power source, connected to WiFi and locked - meaning that it must be asleep - or with the lock screen only visible. This is for automatic backups.
If the iPad is not responding at all to any user input, try restarting it or resetting it and see if you can take the steps necessary to back up. You can initiate the backup manually as well.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

HT1212 Old ipod, can not get it to connect with itunes & i no longer have the computer it was once synced to. It will not allow me to do anything but turn it off & on.

Old ipod, can not get it to connect with itunes & i no longer have the computer it was once synced to. It will not allow me to do anything but turn it off & on.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Thinkpad Edge S430 - Windows does not detect external display connected via HDMI

On a Thinkpad S430 with HD4000 integrated graphics, an external display connected via a HDMI cable is not detected at all when using Windows. The system is fully updated as of the time of posting this message, both via the Lenovo Update tool as well as Windows update.
The Intel driver version is 8.15.10.2696. It appears that this is the latest version, since it does not offer an update when I try to auto-update it via Device Manager.
NB: I am running Ubuntu 12.04 with kernel 3.4.0 on the same machine, and the external display works perfectly fine with this software configuration.
Hence I think that it's very likely that this is a Windows-specific driver issue.
Would Lenovo happen to have a driver update in the works? Alternatively, I will be thankful for any suggestions about possible resolution of this problem.

skn2011 wrote:
My Macbook Pro notbook 13.3" does not detect external display throught it's mini display port to HDMI connector when connected to Sony Bravia 32" LCD TV.Can anyone help me get the answer as i tried reading everywhere on internet and none does not seems to work.Please help me out guys.
Are you using the Apple adaptor or a 3rd party

N9 not detected via USB connection

Since last few months I have observed that my Nokia N9 is not detected via any PC if connected via USB cable. The USB cable is OK because my other devices are easily detected through same cable. Can anyone suggest solution. I have already try to "Clear device" under settings->Reset.
Please help.

@girishpadia
Presumably your N9 still charges when connected to PC USB?
Does this apply to both Nokia Suite and Mass Storage mode presupposing that Nokia Suite is installed upon PC?
Happy to have helped forum with a Support Ratio = 42.5

MAX not detecting PCI 6259 connected to BNC 2120

I have the DAQmx driver 9.0.2
I have the card (PCI 6259) in a windows XP machine
The breakout box is a BNC 2120
MAX does not detect any devices and interfaces.
Thanks for any help,
Fmiles

Does your device show up in Device Manager under data acquisition devices? If not than it is not being recognized by the computer and you should try moving PCI slots on the card. If it does not show up under data acquisition devices, right click on it and select uninstall, restart the computer and it should install on its own again.
Was the card installed during the DAQmx install, try reseating the card.
Make sure the NI Device Loader Service is started in Control panel»Administration»Services. It should be set to started and automatic.
Does DAQmx 9.0.2 appear under Software in the Configuration Pane of Measurement and Automation Explorer, if not, it may not have installed correctly.
Doug Farrell
Product Manager - Condition Monitoring
National Instruments
National Instruments Condition Monitoring

Windows 7 client won't connect with 802.1x security

Having issues connecting a windows 7 dell laptop with cisco unified wireless infrastructure. Currently running 4 4402 WLCs and 1 wism. The client in question is trying to connect to an AP that sits on one of the controllers on the wism. WLC code running is 6.0.199. If I configure the windows 7 client to an ssid with wpa2 with preshared key it works with no issue. It's really problematic with 802.1x, wondering if there is addition settings on the adapter in win 7 that I'm missing or have overlooked.
Thank you in advance for any suggestions to a solution to my problem
Regards,
izzy

Windows is going to want to use the credentials that you login to the machine. SO if you logged is as "administrator" but you need to authenticated as domain\John.Smith you need to manipulate the credentials.
If you are logging in to the machine with valid domain credentiasl though, it becomes a bit more difficult.
So, is this the only type of machine having an issue? What is the driver version and chipset type?
you can run debug client < cliet ma address > and watch what is happening from the controllers persepctive. You can also see what username is being sent to the AAA server.
Cheers,
Steve
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Running Windows 2003 Server on Xserve Intel with BootCamp?

Well...
This sounds like awfully bad idea, but one of our clients needs to run Windows 2003 Server for a certain project in their organisation. Fundings for the new hardware is available. Windows-compatible hardware!
The idea here is to get fundings for a new Xserve, run it with Windows 2003 Server in the project and then keep the delicious hardware for free when the project ends. A PC-server would be thrown out of a window in this 100% Mac-centric department.
Windows 2003 Server runs smoothly on a MacPro with Boot Camp and Parallels Desktop. What about the XServe Intel?

Schuckert-
Greetings.
Are you in a position to test the configuration for a while? If so then I vote do it. If not, you could buy a copy of OSX Server and install it on a Mac Pro and try running your software on the XServe platform.
However, depending on your relationship with this client, I would have them sign a release based upon the beta-ness of the software.
A lot of us here are not in a position to give such things a try-just yet. Too busy trying to make things transition smoothly on the accepted configurations.
Although I will say that I suppose a client will eventually pose the question to me (:>)
Luck-
-DaddyPaycheck

T410 running Windows 7 not detecting HP LP3065 connected with DisplayPort to DVI Dual-Link

Similar Messages

Maybe you are looking for