T410 - Sound card stopped working after Lenovo System Update

hi all!
yesterday I performed a system update trough the ThinkVantage System Update 3, I chose a complete update (even the BIOS).
After the update, the sound card is not working anymore: everything in the control panel looks fine, volume is up and all's connected, but no sound is coming out, with the exception of the skype system sound when starting/quitting the application...
No system restore is possible (it looks disabled by our IT dept), updated the drivers via windows update, but no help.
Any clue?
Thanks in advance!
Riccardo
Solved!
Go to Solution.

Remove the audio-driver via Controlpanel - Add/Remove Software
Download the audio driver from Lenovo
Install the driver manually
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

Similar Messages

Norton Anti Virus Live Update stopped working after last system update

Hello,
I am using Anti- Virus version 11 for MAC. It has worked fine for years. Now Live Update will not run.
I have tried reloading and nothing helps. Is anyone experiencing this problem.
Alice

FYI:
Norton Anti-virus software is the worst app to install on a Mac. It will slow down the drive and cause all sorts of system issues. Delete Norton and get ClamXav available here, and it's free:
http://www.clamxav.com/
There are no known Mac virus. If you really think anti-virus software is necessary, then use Clamxav. It can detect a trojan horse and malware both.
Here's a thread that might help you make your mind up: http://discussions.apple.com/thread.jspa?messageID=8330584&#8330584
Carolyn
Message was edited by: Carolyn Samit

After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working!

After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working? Can it be recovered or a Hardware has to be replaced. I tried restoring my phone, but it did not work. Any solutions?

alisportshots wrote:
I have a similar problem, but after following your suggestion of deleting my iphone backup and then turning backup back on again, I needed to plug my phone into my computer to sync the backup. I re-tried to do an icloud backup and it again told me that "the last backup could not be completed"... since I had deleted the backup, it says the "Last backup: never". Ugh. I reconnected my iPhone 4S to my computer and iTunes so I could sync my phone and do a backup... it's still "waiting for sync to start"...
For your iCloud backup, you may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.
If you turned iCloud backup off and try to sync to create a backup on your computer and got a "waiting for sync to start" error, it may be caused by a corrupt backup on your computer. You could try deleting your last backup by opeing iTunes and going to Preferences>Devices, clicking on your last backup and clicking Delete Backup. Then try again.

Coldfusion 64 bit windows installer stops working after recent microsoft update

Coldfusion 64 bit windows installation stops working after recent microsoft updates and how I worked around it.
My question is at the end.
Trying to deploy coldfusion 9 enterprise 64 bit trial version onto a Windows 2003 64 bit datacenter OS with all OS updates from MS (as of 4-7-2011).
Steps taken (remember, this is all 64 bit):
1. Installed the base OS which was slipstreamed with SP2.
2. Checked w/ microsoft and installed 63 OS updates.
3. Launch the CF9 trial exe.
4. As soon as the first screen finishes (the one that looks like it is extracting files) then the second screen pops up (the one that simply says CF Adobe Coldfusion 9) and the progress bar quickly moves 95% to the right and the install application quits. No error, no nothing. No log file either.
5. After a moment of incredulous silence (and retrying/rebooting, etc), I started to google it. I found nothing. However, I did find a post (thanks dspent!) that was helpful in that it told how he was able to get at a log file of sorts, by pre-extracting the coldfusion_9_WWE_win64.exe file and launching the adobe_cf.exe by hand. (Dspent's install snafu was different than mine, but his post was very valuable and got me started in the right direction.)
6. Got a copy of rarunzipper and extracted the coldfusion_9_WWE_win64.exe file.
7. From the windows directory created by step 6, I launched adobe_cf.exe.
8. Same thing (the install application quits. No error, no nothing. No log file either.).
9. I examine the hs_err_pidxxxx.log file (where the xxxx is a number).
10. I see inside that file an ominous message: "A fatal error has been detected by the Java Runtime" then "Problematic frame ntdll.dll" and then "The crash happened outside the Java Virtual Machine in native code".
11. OK, so now I am thinking ntdll.dll !! Native code !! It is like Java is telling me that for some reason it can't dance with the OS.
12. On a hunch, I decided to test a CF install again on a server with just the base install of W3K3 64 SP2 (ie: skipping step 2 above this time).
13. Bingo! That install works.
14. Therefore, one of the 63 patches I had downloaded from MS had triggered a problem with the CF installer.
15. Back on the first server (the one with the MS security patches installed and the one that CF won't install on). In the CF file adobe_cf.lax (one of the files extracted in step 6) there is a line that mentions where the install gets it's java. Find that file, and check java version installer is using. It is using 1.6.0_14-b08.
16. Off to the Java website, and there is a newer version of java (1.6.0_24-b07). Downloaded and installed it.
17. Modify a line in adobe_cf.lax :
   before
     lax.nl.current.vm=resource\\jre\\bin\\java.exe
   after
     lax.nl.current.vm=C:\\program files\\java\\jre6\\bin\\java.exe
(that assumes that you let step 16 install to the default location)
Save the file.
18. Run the install ... ** IT WORKS ** !
Obviously, the built in java provided with the CF installer is no longer compatible with some change introduced by some recent MS update on the W2K3 64b SP2 platform.
And now the interesting part. Although I forced the installer to used the new java, it did not incorporate it into the cf build (ie: in jvm.config, you still see c:/coldfusion9/runtime/jre AND the version of java.exe that is in that directory is the original version, not the newer version I forced the installer to use).
On the surface, CF seems to run OK, but I have not done any application testing yet.
And finally my
** QUESTION **
Would it be appropriate to simply point the java.home var to the new java directory? I see that the directory structures and files are not exactly the same (close though) so I certainly don't want to break things by doing this, but instinct tells me that if the installer broke using the older version, then something else is gonna break down the road if I don't use the new version. On the other hand, the differences in the directories and files is enough that it makes me very nervous, with my limitied java skill set, to make this decision.
Thanks in advance!!
Byron

Hi Byron,
Wow great post no doubt much of the information will be useful for those on Win03 SP2 +. Have to say not come across similar problem on Win08 r2 SP1 +.
So to your question. Adobe security bulletin (http://kb2.adobe.com/cps/894/cpsid_89440.html) recommends running CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do that. I take you installed JDK and not just JRE 1.6.0_24? Post install of JDK follow these steps:
Stop CF - SERVICES.msc stop "ColdFusion 9 Application Server".
Take a copy of CF\runtime\bin\jvm.config - so you got a backup.
Edit CF\runtime\bin\jvm.config find line "java.home=" and comment it out eg:
#java.home=C:/ColdFusion9/runtime/jre
Add new line like so and save jvm.config:
java.home=C:/Program Files/Java/jdk1.6.0_24/jre
Note there the slashes and the location of the JRE (runtime) - you need to point to the one in JDK because the other JRE in C:\Program Files\Java\jre6 will be missing a DLL.
Start CF via SERVICES.msc.
HTH, Carl.

Firefox extension: "TrueSuite 5.2.500.16" stopped working after last firefox update (30.0), even though about:plugin says it's enabled. Any fix to make it work?

Firefox extension: "TrueSuite 5.2.500.16" stopped working after last firefox update (30.0), even though about:plugin says it's enabled.
i tried resetting firefox and look for similar problems, unfortunately didn't find anything.
also there's weird blank space before address in address bar
other extensions and addons seem to be running fine.

jscher2000, i tried that, i thought it didnt work before, it's just that this time i accidentally closed (and thus restarted) firefox and it worked, thanks man

Sound Suddenly Stopped Working After PC Restart

The title says it all, my sound stopped working after I restarted my PC, I got these screenshots to try to help.
http://prntscr.com/4urkk9
http://prntscr.com/4urkoc
http://prntscr.com/4url97
My PC is a Compaq CQ58, and this same thing happened before over a year ago, I simply system restored it, but I don't want to have to do that again.

Hi
Go to device manager and uninstall the sound driver then restart the unit and check if sound is back.
Try to update the Sound and Bios from HP website.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

After Software Update 2007-004 airport card stopped working after wakeup

Hi,
I have a powerbook G4 - DVI running 10.3.9. After I have installed Software Update 2007-003, when my computer goes to sleep and then wakes up, airport card stops working. I had to open the back of the computer, unplug and plug the airport card, then it starts working again. But next time the computer goes to sleep, it stops working again.
Does anyone have a similar problem? Any work arounds?
Thanks in advance.
Also following is the logs from Software Update. Looks suspicious:
Mac OS X Version 10.3.9 (Build 7W98)
2007-04-28 18:56:03 -0400
2007-04-28 18:56:03.190 loginwindow[181] FSResolveAliasWithMountFlags returned err = -43
WirelessScan timeout waiting for first scan result
WirelessScan timeout waiting for first scan result

Deleting AppleAirPort2.kext solved the problem for some...
http://discussions.apple.com/thread.jspa?threadID=934370&tstart=0
While others had to rollback the AppleAirPort.kext to version...
http://discussions.apple.com/thread.jspa?messageID=4310165&#4310165
Installing the Security update 1.0.1 from 5/01/2007 helped others. Reapplying the Combo Update again helped a couple of people.

Front and back cameras stopped working after IOS 8 update

My front and back cameras both stopped working after i updated my phone to the IOS 8 software. Does anyone know why this would happen or any way of fixing it?

Hi VictoriaViking,
Not sure why your cameras stopped working with the update, or what the exact symptom is (black screen, no response...), but please check out the Camera troubleshooting section of this article. (I know some don't apply to your issue.)
iPhone: Hardware troubleshooting
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Take care,
Nubz

IWork (Pages) does not work after last system update!

since some days (after last system update) iWork programms are not starting any more!
macosx 10.7.5 new update
solution atemd: cancel p-ram and p-list, re-installing iwork from DVD and update it from http://support.apple.com/kb/DL1563
macbookpro 2.53 ghz intel core 2 duo, 8 gb ram
any body an idea what i can do to fix it?

hi - i think you should not use 'xhost +' - it's not secure and you shouldn't need it....
in your .bashrc or .cshrc or whatever, you should have setenv DISPLAY .0 or the equivalent export...
then ssh -Y hostname should be all you need... no xhost, and not setting DISPLAY every time...
could you enter the following command from a terminal window and post back the results?
grep X11 /etc/ssh*_config
cheers

Audio / Sound Card not working after Soundblaster.USB.Audio.Support.pkg

Ok, first - confess - it was stupid. I installed the Soundblaster.USB.Audio.Support.pkg package, which i downloaded from the internet, to make the harman Kardon Soundsticks (USB-Version) working, as nothing happened when plugging them in.
First, it ruined the mouse working after reboot and also disabled the internal sound card, not even as device available anymore. I fixed the mouse problem by installing IOUSBFamily-281.4.0-log(PPC).dmg
How can I make the sound card be available and working again ? I also updated to 10.4.11. Did not help ! Can you ? Thanks !

Welcome to the Apple discussions.
First, look in system preferences, accounts, and for your login account look at login items to see if there is a Soundblaster USB module that is loaded when you reboot your system. Delete it if there is one.
If you updated to 10.4.11 by software update, download the combo update from http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html . The combo update is a complete update for all updates to 10.4, and installing the combo sometimes fixes odd things.

Sound suddenly stopped working after reboot

I just got KDEmod installed and working. Sound was working in it before I rebooted, to get ntfs-3g and hal working so I could mount my Win7 partition. When I got back into KDE, I was notified that "The audio playback device *** does not work. Falling back to ." I googled around all day, but couldn't find the cure for this. Before the reboot, I installed hal and dbus through pacman, and added them to my DAEMONS=
I'm thinking it has something to do with hal or dbus somehow, is there anyway I can undo what I did? Or is there anyone else who had/is having this problem that could help?

Same issue here after upgrading from KDE 4.2 to KDE 4.3.
Whenever a system sound has to be played, I have this notification:
"The audio playback device does not work Intel ICH6 with STAC9750,51 (Intel ICH6). Falling back to default."
Then it does fall back to default device and correctly plays the sound.
However, when I run JuK, after displaying this same notification, I have no sound, or rather, I rarely have sound (sometimes it takes a couple of seconds to start to play, more often it does not start at all).
I don't know if it's related, but video stopped working as well after migrating to KDE 4.3: Dragon Player just hangs when I try to open a video file ?
And yes, my user belongs to audio group, and video...

My Zii Sound D5 stopped working after one year

Hi there,
After one year of enjoying my beloved Zii Sound D5 it stopped working with any apparent reason. It just does not switch on.
I dont have any technical knowledge but after reading a few messages in the forum my guess is that the problem is related to a power spike.
Can anyone help?
Thanks

Tobago82,
Have you tried plugging the speaker to another power outlet? If you have not done so already, please contact our Customer Support for assistance.

Sound Receiver Stopped working after iOS7 on iPhone5

I have been using iPhone 5. After installtion of iOS 7 my receiver stopped working. I can use bluetooth, speaker and headphone. But i cannot use phone receiver. I started working for a day after iOS7.0.2 for a day after that it stopped working one more time. I took it to Apple store; they replaced my receiver but still does not work. According to them it's out of warranty as i purchased the phone on first day when i went on sale and it's more than year. Anyone has any clue. The replacement cost is $269.
Any idea???

My daughter has the same problem. The speakers work but not the sound receiver. Going to call apple tomorrow.

Photoshop 3D Extrusion stopped working after latest Adobe update

I have Creative Cloud subscription and Photoshop 3D Extrusion used to work fine (though slow).
After latest update several days ago it stopped working, displaying an error message instead:
"The 3D features require that 'Use Graphics Processor' is enabled in the Performance preferences. Your video card must meet the minimum requirements and you may need to check that your driver is working correctly"
The Graphic Processor is enabled, and the driver is working fine.
Is this a bug or a "feature" in new version? How to make it work as before the update?

Ken, who are "they"? I expect help from Adobe. Aren't you a staff member?
When Adobe sold me the Cloud it did not tell me that 3D features were not going to work.
The last update was applied only to Cloud version of Adobe products. It's not Photoshop specific. Something was wrong with the cloud software update.
I expect Adobe to fix the bug and make 3D features work again.

HT4623 Data card not working after 6.1 update

After updating my ipad 3 the data card has stopped working. This happened before. With the last update, But this time I can't seem to fix it

I am having the same problem it is saying that i have headphone plugged in when i dont. i Just did the update on monday and now i am having this problem!

T410 - Sound card stopped working after Lenovo System Update

Similar Messages

Maybe you are looking for