T410 stops at Thinkpad screen

Have noticed my T410 started this thing where it stops at the Thinkpad screen and goes nowhere.
Doesn't get to Windows at all.
Re-booting seems to solve the problem.
Using wireless connection to the router.
Everything else about the T410 is stock as delivered.
No plug-in devices.
Model: 2516 CTO
Solved!
Go to Solution.

change the boot order in the bios to allow laptop to boot from the hdd first. Also check to make sure nothing is wrong with the usb ports, i.e. bent pin or broken usb port.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

T410 stops at initial screen

Hi,
A friend has a T410 and suddenly it can't move past the initial boot screen. I'm not even sure how to get to the BIOS. The message says something about pressing the blue button, which I did, but nothing happens. It just stays there... any thoughts how to move past that?
Thanks

Are there any broken USB ports?
http://forums.lenovo.com/t5/R-L-Series-ThinkPad-Laptops/ThinkPad-T400-T500-R400-R500-hangs-on-boot-a...
Does it get past the ThinkPad screen if you remove the hard drive?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

T500 not work - boot hangs at ThinkPad screen

Hello, I have a thinkpad T550 T500 and has been off for a few weeks and now I've tried to turn on, but not start He stands in the first screen thinkpad (To interrupt normal startup ...) but it does not advance. I tried to boot with battery and without battery but the operation is the same Anybody can help me?
Moderator comment: Subject and text edited.
Solved!
Go to Solution.

I'm sorry, de laptop is T500
I try start the PC without battery, only with power, but this same.
Stop in the screen: "THINKPAD, to interrupt normal startup, press theblue ThinkVabtaje button"
Moderator comment: Subject edited.

STOP ERROR - Blue Screen - on Lap Top - Fixed, tear1, support rocks!!!!!!

New Iphone, and new laptop, installed itunes Noprob,
Hooked Iphone to usb laptop found Iphone and installed and activated Noprob,All systems go, I am loving it.
I then ejected my Iphone and hooked up my Ipod to transfer purchesed music and shows transfered Noprob, so I eject my Ipod to hook up my Iphone to put my purchesed music on it.
THATS when it happened.
STOP ERROR- Blue screen,cpu restarted on its own.
I deleted itunes and I deleted camradrives, printer drivers.
I tried allmost everything and still got the same blue screen.
To make a long story shorter I called apple talked to the (now this is important) Iphone/Itunes department they are seperate but have a div. that works as one but you have to ask for the department that takes care of both or you will talk to both or 3 or 4 other dept.
Tear 1 Support had me do a soft reset on my phone it did not work so I backed up my phone # and they showed me how to do a compleate reset and it worked.
I have been Error and blue screen free for 2 days and I feel very posative about the future with my relationship between my cpu and my phone
Thank you for your time.
I hope I help some one I found no relief here with my problem but its a great resource for information
GOD BLESS TEAR 1 SUPPORT YOUR TEAM ROCK'S
Pro-Iceman
Anacotes,Wa

You don't need to upgrade your software. But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3. It's easy to use in DW CS4, 5, 6 or CC. More importantly, it's bullet proof and works in all devices.
Pop-Menu Magic3 by PVII (commercial DW extension)
http://www.projectseven.com/products/menusystems/pmm3/index.htm
If you don't have a budget to work with, you can roll your own menus with jQuery plugins. A bit more effort on your part, but they perform better than Spry.
jQuery Superfish
http://users.tpg.com.au/j_birch/plugins/superfish/
jQuery MegaMenu2
DEMO:
http://www.geektantra.com/projects/jquery-megamenu-2/
DOWNLOAD:
http://code.google.com/p/jquery-megamenu/
Nancy O.

How do you edit-in a "stop" into a screen recording and then insert a "button" to link to a document

Ok, so I am working on my first Captivate project. So far so good (mostly). I want to interupt a screen capture recording that I now have. Currently, it captures a pdf screen and an audio narration. I want to have a button appear at a certain time within the recording were the user can click it and be taken to another pdf document in which the user will have to read the document and take a quiz on the content. This action of clicking the button will stop the recorded screen narration and allow unlimited time to read the linked document and complete the quiz. Upon completing the quiz, the user will click the continue button and be returned to the screen capture recording where they left off. Sooooooo........How do I do this??????????
Will I have to split the screen capture recording into two slides in order to make it stop when the button appears?
Will I have to, or can I, insert a branching slide function at any point in my screen capture recording?
Is it best to connect the button directly to the pdf file or to a url on my intranet?
All help will be much appreciated!
Thanks,
John

Too bad, you should know that full motion is mostly not the best choice in Captivate, because not only the filesize is much larger, but editing is a lot more difficult than with the, for CP, more natural capturing mode Automatic (or Custom) where static slides are produced whenever possible and only will be reverted to FMR when necessary.
Between the editing possibilities for FMR you have splitting, which could help you.
Or else, try to view the FMR by using Preview slide (F3 or the play icon on the Timeline, or space bar). Pause on the place where you want to have a pausing. The playhead in CP5.5 will remain on that frame, you can see at which second it is placed. Now insert a button, that will be placed with the start of its timeline at the position of the playhead. If this is really the place where you want to pause, you have to change the timing of that button so that the pausing point is exactly at that place. You can move the button timeline with the mouse, or perhaps better by using shortcut keys: arrow keys (left/right) will move 0,1sec in that direction, CTRL-arrow 1 sec. You can check, edit ths Pause at also in the Timing accordion of the Properties panel of the button.
You will have to insert as action for that button Open URL or File.
Lilybiri

Ipod touch has stopped working. the screen showes that it need to connect to power.

ipod touch has stopped working. the screen showes that it need to connect to power.

Hey there our3goldens,
It sounds like you are unable to successfully boot your iPod Touch. I would recommend these steps specifically from the following article, named:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
If the device remains unresponsive or does not turn on (or power on), reset your device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for using Apple Support Communities.
All the best,
Sterling

Installing Patch 9.2.0.5: Weird "Stop Running Services" Screen

Hi to all.
I found this issue in several places, including this forum, but I never saw a working proposal for a satisfying solution. Installing Oracle Patch 9.2.0.5 over a 9.2.0.1-Installation on XP Pro, I was confronted with a "Stop Running Services" screen, that listed ALL running Windows Services, even the most basic ones, which are required for a working OS and cannot/should not be stopped. Of course I had stopped the Oracle listener and instance services (including the recovery service, omtsreco.exe).
I found using TASKLIST.EXE or LISTDLLS.EXE, that many Oracle DLLs like ORAPLS9.DLL were used by a command "svchost -k netsvcs". But I could not find out, where and for what reason this command is launched and how I can prevent this launching without hazarding the system. The string "netsvcs" can not be found in the registry, for instance.
At least, somehow I managed to do the job, but I cannot exactly recall all the steps I took! At the "Stop Running Services" screen I chose "Abort current component and continue installation", and after install finished (it said something like "install finished with errors" or that like), I was left with a non-functioning Oracle client. Whopee! It told me "Bad function entry point" when I tried to start SQL*Plus. Desperately, I started the patch installation a second time. THIS time I installed OUI 10.1.0.2 as a first step (which I did NOT during the first round), and then started patch install. Strangely, this time I was presented another flow of dialogs (Sorry, but I missed to make notes about the exact titles and the dialog flow), which took MUCH MUCH longer ("Analyzing Dependencies" for example, took 1.5 hours to complete), and I really do not know, how or whether I was confronted with a "Stop Running Services" issue), but after all I really managed to complete the second try successfully, and the client functions worked again (SQL*Plus reported the correct version, 9.2.0.5).
Before I'm driven through this hell again (I have to patch several workstations running 9.2.0.1), I'd like to know,
- Whether the issue has been solved, that the "Stop Running Services Screen" lists
most basic services like "Event Manager". Could it have been caused by using the
wrong OUI version or under what circumstances will it appear?
- Secondly, what is this mysterious "svchost -k netsvcs" (netsvcs = NETSerViCeS ?)
locking many of the DLL files in the Oracle "BIN" folder. It is definitely NOT
one of the Oracle listener or instance services (all of which start with "Oracle").
How can this service be disabled or be prevented from loading the Oracle DLLs?
Sorry for the long story and partially unclear details, since I do not recall all of the long installation session. Any input is welcome.
Werner

Ok, "netsvcs" CAN be found in the registry, but I used FINDSTR.EXE to seach a UNICODE .REG file, and of course had no hits. Meanwhile, I learned more about SVCHOST.EXE and it's service groups, one of which is "netsvcs". In HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SvcHost, I found a value and a key named "netsvcs", the value contains this string (abbreviated):
"6to4
AppMgmt
AudioSrv
Browser
CryptSvc
helpsvc
xmlprov
wscsvc
WmdmPmSN".
These are the symbolic names of the services presented to me in the "Stop Running Services" screen! Now it's clear, why this screen appears, since "svchost -k netsvcs" is the process locking the Oracle DLLs.
But the question remains: WHY does "svchost -k netsvcs" need access to Oracle DLLs? Which system or application setting controls whether svchosts tries to load the DLLs?
Still puzzled. Werner.

My New iPod nano 6g, just stop working the screen is freezd in the menu? Pleace HELP!!!

My New iPod nano 6g, just stop working the screen is freezd in the menu? Pleace HELP!!!

try resetting. Hold down volume down and sleep/wake button until you see apple logo.
If that does not work, connect it to itunes, then restore.
If none of that helps, you may need to contact apple. Has it gotten wet?
i

I have macbook pro 13.3 inch. I am installing window 7 in boot camp manager after copying file of window upto 67% it doesn't response and i had forcely shotdown my macbook. Now my macbook doesn't open and stop in black screen with cursor blinking.

i have macbook pro 13.3 inch. I am installing window 7 in boot camp manager after copying file of window upto 67% it doesn't response and i had forcely shotdown my macbook. Now my macbook doesn't open and stop in black screen with cursor blinking. Now how could i open my macbook pro.

At startup hold down the Option/Alt key and from the screen that comes up select your OS X partition to start the computer from. Then use the Boot Camp Assistant app to Remove Windows and the partition you reated for it and it will Automatically place the space you allocated for the Windows install back into the OS X partition.
NOTE:
Do NOT use Disk Utility to erase the partition that was created for the Windows install. Use the Boot Camp Assistant app again to do that.

How to stop the apps screen from appearing while in the internet.

How do i stop the application screen from keep appearing on my ipad. Every page i go it appears. Its annoying. I have my pop up blocker on.

What do you mean by "the application screen"?

How to stop the registration screen

I have had to reinstall my copy of FCE-HD. Since I had already registered when I first installed it, I don't want to send a second registration for the same product in if I don't have to. Is there a way to stop the "reminder to register" screen when I start up the program? It's not a major issue but it is annoying. Or, would the second registration of the program simply overwrite the first registration I had sent?

A second registration wouldn't do anything. It's the only way to stop the registration screen.

Trackpad Gestures stop working after screen sleep on OS 10.9.2 update

Trackpad Gestures stop working after screen sleep after OS 10.9.2 update. Anybody know why? Is there a process I can stop or reboot in the Activity monitor to refresh this? These gestures include launch pad, mission control and full screen swipes. Annoying.

Same problem same version. On a MB Air. I have every gesture turned on. When this happens I have same problem on Magic Trackpad and my MB Trackpad. If I quit the app part of the gestures come back but then stop again. The worst is scrolling. This one is a show stopper and always require quit and relaunch.

Vista Stop Error Bleu Screen

I installed Vista 32bit via boot camp. Often when booting to Vista, I get a stop error blue screen telling me that "A problem has been detected and windows has been shut down to prevent damage to my computer". Calls it "an internal power error". It then restarts to OSX. I try again and its a crap shoot whether or not Vista loads. I re-installed Vista and d'loaded and ran the BCupdateVista32, but the problem persists. Is there a solution or do I scrap my boot camp?

I have the exact same problem on my 24" iMac, running Snow Leopard. Vista 32bit crashes on startup with a blue screen of death, the message stating an internal power error. If I restart in Vista, it's usually fine. Any ideas?

HELP! PP & Encoder both stop loading - splash screen stops at chromakey.aex

When attempting to launch, each version of Premiere Pro and Encoder (Cs6, CC 2014) are stopping when the splash screen gets to ChromaKey.aex. I have tried un-installing and reinstalling, running the Adobe Cleaner but still the same problem. Any ideas please?

reset your preferences -
adobe media encoder: HELP! PP & Encoder both stop loading - splash screen stops at chromakey.aex
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

HT5557 I've always been able to see the clock at the top of the screen in iPad iBooks, but the clock has now disappeared unless I tap at the stop of the screen. How can I get the clock to stay at the top of the screen?

I've always been able to see the clock at the top of the screen in iPad iBooks, but the clock has now disappeared unless I tap at the stop of the screen. How can I get the clock to stay at the top of the screen?

cktan124: I searched around and found the iPad does not have a PRAM.
Anyone else want to guess?
I found many folks here trying to hide of the clock, but I need the clock. I use a PDF on my iPad for my notes when I am speaking in front of an audience. I need the clock so I can kep track of time.

T410 stops at Thinkpad screen

Similar Messages

Maybe you are looking for