T410 USB camera for Citrix not visible

I am trying (unsuccessfully) to get a USB camera to redirect to a XenApp desktop using the Citrix receiver 13.0.5 running on a T410 Smzrt Zero Client.
The camera is visible if I connect to the Citrix server from the T410 using RDP, but using the Citrix Receiver it is not visible.  I can see USB memory sticks under both Citrix and RDP, but the camera only shows under RDP.
I have tried 2 cameras (both Canon) and neither will work - Canon Powershot G1X and Canon IXUS 130.
I have checked the Citrix policy for USB redirection and am confident that this is correct as I can connect from a PC running the Citrix client and the USB camera will redirect to the session.  It is just the T410's Citrix receiver that appears to have the issue.
Please advise .. I've had trouble finding a single definitive resource about connecting and redirecting cameras on the T410 , so hopefully others will benefit from a solution.  This is currently a show stopper for us - we are about to rollout a whole heap of T410's, but can't until this is resolved.

Yes this is true, but I want a medium res camera that I can send pics from. I have a sony-ericsson w/3.2mp, but I would like an iphone and not take a step backward with camera. 2mp would be fine w/ optical zoom or 3.2mp.
Also to take a pic transfer it to the phone and send it and do that 10-30 times a day gets old. I do have a digital camera, and that's for taking pictures. I use the phone for taking visual notes and the detail at 10+ meters is somewhat important.
Also note my 3.2 take much better pics then the iphone the fuzziness occurs with the higher res chips.
The phone does not replace the camera, laptop, 20mb cable internet, but is a more portable, integrated device. If I wanted a high res picture I have my grandfathers old 8x10 film camera.
http://qvsgadgetworld.com/cephcale.html 8X Telescopic Universal Cell Phone Camera Lens Sale price: $17.99 sounds like it's crap but maybe in bright sun?

Similar Messages

  • USB camera for Ti Powerbook

    Hi,
    Just got iChat and Skype set up at work (anyone else notice the quality difference between the two? its drastic)
    Anyway, I'm wondering if anyone can recommend a camera to use with my old titanium powerbook when I'm out of the office. Although there are threads on here that discuss which usb cameras work with OS X, I couldn't find one that mentioned cameras that will clip onto my screen nicely. All of the PC ones I found have too big a clip for the powerbook screen.
    Any suggestions?
    thanks

    I ended up settling for a Genius Webcam EYE. Bought this in New Zealand for NZ$20.
    It clips onto the lid pretty well. It's slightly loose, as its also made to accommodate thicker lids found on PCs. Can be fixed by slipping something like a card behind the camera's clip.
    The picture quality is reasonable, but nothing great. I'm not sure how much of this is down to my powerbook (it is an old 667mhz g4 after all). I get considerable lag with it, but it suits my requirements okay. I'll have to test it out on the g5 sometime.
    Comes with OS X drivers, but needed to use the Ecamm iChatUSBCam (US$ 9.95) to get it working with iChat. The benefit of this is being able to also send a video of my mac's desktop over the web.

  • USB Device for IPOD not recognized by Windows, whether ipod connected or no

    During the past few days I have received a pop up error message from (I would think) Windows that the USB device is not recognized. I have the USB plug for the ipod connected (as always)but the ipod isn't even connected. It keeps popping up like every few seconds that the usb device is not recognized.
    When I attach the ipod itself, the ipod is recognizing it because it powers up. But, it took 10 times just to get the ipod to recognize through itunes. It updated, then immediately upon completion, windows again starting giving repeated error messages that the usb device wasn't recognized.
    I have downloaded the newest itunes but I had it on my system for 4 days with no problems whatsoever. I don't think that's it. No other system changes.
    I've deleted my temp files and cache. Also did a "disk clean up" and "defrag." It's still doing it.
    Any suggestions?

    I'm having the same problem. Ever since I upgraded to version 7, iTunes & my PC no longer recognise my iPod, and it therefore won't sync.
    It's not the USB port (other devices work in it), I rebooted my iPod and re-installed iTunes, I've tried stopping and starting the iPod Service (but can't see my iPod in My Computer). When I run the Diagnostics it says iPod connection failed. I've even bought a new USB cable but that doesn't work either.
    This is driving me up the wall. Is there a glitch with iTunes 7?
    Can anyone help me out?? Thanks
      Windows XP  

  • Changes made in Camer Raw are not visible in Bridge

    I'm editing the RAW images in Camera raw started from Bridge (Ctr- R). By returning to Bridge with "done" the changes are not visible. This worked until recently.
    s there any setting which prevents Bridge taking in consideration the info from the XMP file ?
    Re-starting Camera Raw I can see the changes from the previous session ...
    thanks in advance

    I love these quick solutions also. 

  • USB Port for iPod Not Found

    The problem seems to be that the USB port is not being recognized by the software. I tried using Anapod and when I launched the program it could not find the iPod device even though it was connected in the USP port on my laptop.
    BTW - I tried all four USB ports and the results were the same
    Any ideas how to fix this?

    I'm having the exact same problem. I've reinstalled all the iTunes software several times. I have an iPod mini and an iPod nano that will not show themselves in iTunes. However, if I take them to my laptop, they connect perfectly with iTunes. Is there some way to rid myself of the usb drivers for iPod so I can get it to try to recognize the iPods?

  • AirPort Extreme USB Connected Disk Drive Not Visible To Time Machine

    My AirPort Extreme USB connected disk drive is visible in the Finder and desktop. It is not visible to Time Machine. When I open Time Machine and bring up the "Choose Backup Disk" the AirPort Extreme USB connected disk drive is not visible.
    What am I missing here?

    Hi Pete Mackie-
    Nope. You aren't missing anything.
    Mac OS X 10.5: Time Machine doesn't back up to AirPort Disks
    Luck-
    -DaddyPaycheck

  • Wifi SSID used for install not visible

    At Arch install, I could connect to my network (using wifi-menu). After reboot, a scan gives me results, but there is not my ssid.
    Following the wiki, those are the command I tried and their result:
    # iw dev
    phy#0
    Interface wlp5s1
    ifindex 3
    wdev 0x1
    addr f8:1a:67:93:0d:53
    type managed
    # ip link set wlp5s1 up
    # ip link show wlp5s1
    3: wlp5s1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
    link/ether f8:1a:67:93:0d:53 brd ff:ff:ff:ff:ff:ff
    I tried to scan my SSID (Ploup). The scan gave about 10 results.
    # iw dev wlp5s1 scan | grep Ploup
    I have reboot on the USB live key to get the netctl config file automatically generated by wifi-menu. Then I have tried to use it to connect.
    # netctl start Ploup
    Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl -xn' for details.
    # journalctl -xn
    -- Logs begin at jeu. 2014-01-09 20:59:42 CET, end at sam. 2014-01-11 15:44:06 CET. --
    janv. 11 15:44:01 Sonic2 network[1988]: The interface of network profile 'Tel' is already up
    janv. 11 15:44:01 Sonic2 systemd[1]: [email protected]: main process exited, code=exited, status=1/FAILURE
    janv. 11 15:44:01 Sonic2 systemd[1]: Failed to start Networking for netctl profile Tel.
    -- Subject: Unit [email protected] has failed
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/be02cf6855d2428ba40df7e9d022f03d
    -- Unit [email protected] has failed.
    -- The result is failed.
    janv. 11 15:44:01 Sonic2 systemd[1]: Unit [email protected] entered failed state.
    janv. 11 15:44:06 Sonic2 systemd[1]: Starting Networking for netctl profile Ploup...
    -- Subject: Unit [email protected] has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit [email protected] has begun starting up.
    janv. 11 15:44:06 Sonic2 network[1999]: Starting network profile 'Ploup'...
    janv. 11 15:44:06 Sonic2 network[1999]: The interface of network profile 'Ploup' is already up
    janv. 11 15:44:06 Sonic2 systemd[1]: [email protected]: main process exited, code=exited, status=1/FAILURE
    janv. 11 15:44:06 Sonic2 systemd[1]: Failed to start Networking for netctl profile Ploup.
    -- Subject: Unit [email protected] has failed
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/be02cf6855d2428ba40df7e9d022f03d
    -- Unit [email protected] has failed.
    -- The result is failed.
    janv. 11 15:44:06 Sonic2 systemd[1]: Unit [email protected] entered failed state.
    # systemctl status [email protected]
    [email protected] - Networking for netctl profile Ploup
    Loaded: loaded (/usr/lib/systemd/system/[email protected]; static)
    Active: failed (Result: exit-code) since sam. 2014-01-11 15:44:06 CET; 17s ago
    Docs: man:netctl.profile(5)
    Process: 1999 ExecStart=/usr/lib/network/network start %I (code=exited, status=1/FAILURE)
    Main PID: 1999 (code=exited, status=1/FAILURE)
    janv. 11 15:44:06 Sonic2 network[1999]: Starting network profile 'Ploup'...
    janv. 11 15:44:06 Sonic2 network[1999]: The interface of network profile 'Ploup' is already up
    janv. 11 15:44:06 Sonic2 systemd[1]: [email protected]: main process exited, code=exited, status=1/FAILURE
    janv. 11 15:44:06 Sonic2 systemd[1]: Failed to start Networking for netctl profile Ploup.
    janv. 11 15:44:06 Sonic2 systemd[1]: Unit [email protected] entered failed state.

    The ODP.NET 9.2.0.7.00 installation includes the base Oracle9i Client Release 2 (9.2.0.1). To fully take advantage of ODP.NET's XML functionality, it is recommended you upgrade the server and client to Oracle9i Release 2 (9.2.0.4) or higher.
    http://www.oracle.com/technology/software/tech/windows/odpnet/utilsoft.html

  • Usb adapter for mac not working

    Couple Days ago my USB adapter was working fine for my ipod to connect to Itunes but today when I tried to plug in my ipod the itunes is not doing anything. Not Charging. All the drivers are undated, softwares are updated. I already tried reinstalling and uninstalling What can I do? Please Help!

    Looks to me more like a hardware than a software problem. Have you tried using a different USB port or a different cable? Does the iPod charge when plugged into a wall mounted charger?

  • CN41 Customer Fields for WBS not visible in the CN41 report

    Hi,
    I have Done the Below Steps:
    I have done all the Things Below and it is working Also.:
    Create structure CI_PRPS.
    Create enhancement.
    Edit the function exits.
    Maintain the global declarations.
    Design the customer-specific screen.
    Activate the enhancements in CMOD.
    Generate the structures in the Project Information System.
    In CJ20N i have these customer fields as a new Tab and i am also able to save the data in the Database also.
    My problem comes not in transaction execution but in Reporting.
    When i run the Report CN41 the fields which i have added into the PRPS using the Include CI_PRPS is not displayed in the Report.These fields are available in the selection screen but not available in the report when i execute the Report and do choose fields to display collums in the report.
    I am getting these fields in CN43 but not in CN41.
    In CN43 also the Values are comming in ####### but not in correct values.
    Also when i tried to Run the Report RCNCT001 it is asking for the access Key.
    Thanks

    Hi,
          I have Done the Below Steps:
    I have done all the Things Below and it is working Also.:
    Create structure CI_PRPS.
    Create enhancement.
    Edit the function exits.
    Maintain the global declarations.
    Design the customer-specific screen.
    Activate the enhancements in CMOD.
    Generate the structures in the Project Information System.
    In CJ20N i have these customer fields as a new Tab and i am also able to save the data in the Database also.
    My problem comes not in transaction execution but in Reporting.
    When i run the Report CN41 the fields which i have added into the PRPS using the Include CI_PRPS is not displayed in the Report.These fields are available in the selection screen but not available in the report when i execute the Report and do choose fields to display collums in the report.
    I am getting these fields in CN43 but not in CN41.
    Thanks

  • Text Table entries for 0Material not visible in report

    Hello All,
    I have been executing a report to evaluate the forecast error. In this report, when I drilldown via Material, I get the description of the material for few of them and for remainder, just the key is displayed in the description as well as the key of that material.
    I checked the text table for entries of such materials and to my surprise, the text entries do exist in the cube for these materials as well. But it is not being displayed in the reports.
    I also checked the property for Material in the query nd it is being displayed as 'Text and Key'. So there seems to be no issue in the query as well.
    Can someone put some light on this and help me reach the solution?
    Thanks in advance.
    Regards,
    Chaitra

    Dear Chaitra,
    When displaying a characteristic by key and text, the BEx Query Designer automatically displays the shortest available text from the InfoObject's text table. BEx automatically selects the shortest text available from an InfoObject’s text table when displaying a characteristic by key and text. When a text table has a short, medium, and long text field, the short text displayed.
    Try by changing it display as property to long/medium text.
    Plz revert back for if still had any doubt.
    Regards,
    RK

  • Data for 0ACCNT_GRPV not visible in 0CREDITOR

    Dear BW Gurus,
    I have a report that has 0CREDITOR as a characteristic and it has a display attribute 0ACCNT_GRPV. 0ACCNT_GRPV did not have master data previously so i loaded master data (texts) into it and activated it. I also activated 0CREDITOR once again. Now i see the master data in 0ACCNT_GRPV. But in the master data for 0CREDITOR, i cannot see the values for 0ACCNT_GRPV. Can somebody throw some light on this?
    Thanks for all the help.
    Raj

    Hi Raj,
    No. The data for the attribute "0ACCNT_GRPV" would be loaded when you load the 0CREDITOR master data. The 0ACCNT_GRPV text data would be picked up for the master data loaded in 0CREDITOR.
    Hope this make it clear.
    Now to resolve your issue. You have two choices:
    1. If your 0CREDITOR extractor can bring in the values for 0ACCNT_GRPV then that would be the ideal situation. So you need to check in R/3 for this.
    2. In case the extractor cannot bring in 0ACCNT_GRPV values then you need to write an ABAP routine in the transfer rules of 0CREDITOR where you would pull in the 0ACCT_GRPV values based on some logic.
    Bye
    Dinesh

  • Data for 2LIS_03_BX not visible in rsa3

    I am loading data for 0IC_C03 cube. For the same I am doing setup table filling activity.
    Tto initialize the stock I ran satup table for 2LIS_03_BX and I got 150 records transfered to BW extraction. now when I execute rsa3 transaction to check the records for 2LIS_03_BX I can see 0 records extracted.
    What would be the problem?
    Regards,
    Nirav Shah

    HI
    you can get good information in below discussion:
    How to view setup table data????????????
    How to cross check setup table data
    how to check filling setup table successfull
    Ravi

  • Albums camera roll submenu not visible due to scroll bug

    OS 4.3.5 on iphone has a bug.....the "photo album" app when you click on it the "camera roll" submenu gets hidden by the static title "album"...when you try scrolling up the scroll will revert back to its same position and effectively hidding the "camera roll submenu" ....it seems that programers didn't factor the y position of the submenu list.....can someone fix that?

    Open the multitask bar to close the photo app completely or reset the phone by holding the sleep and home button until the Apple logo comes back again.
    Hopefully it will be fixed in iOS 5
    Message was edited by: Ingo2711

  • Where are the camera profiles? Not showing up in LR 4

    The camera profiles are not visible in the camera calibration menu in the develop module of Lightroom 4. I installed them using the installer that came with the profiles. What folder are they supposed to be in so I can use them (Windows 7 x64)? Where is the documentation? Why isn't Adobe answering the phone?

    Thanks for your quick reply! I have the 4.1 update installed. I have a Sony SLT A57. It is not inC\Program Files\Adobe\Adobe Photoshop Lightroom 4.1\Resources\CameraProfiles 
    The actual path there looks like: 
    C\Program Files\Adobe\Adobe Photoshop Lightroom 4.1\Resources\CameraProfiles\lens profiles\camera\adobe standard (empty)
    However, I installed rc 4.2 after I wrote to you, and the path to the (Sony) camera profiles is now:C\Program Files\Adobe\Adobe Photoshop Lightroom 4.2 RC\Resources\CameraProfiles\Adobe Standard. There is another folder named Camera, under Camera Profiles, in which are Canon, Nikon, and other camera folders - with several different profile choices within each folder. In this other "Camera" folder there are some Sony cameras with different profile choices for each camera in the folder, ie portrait, landscape, vivid, standard. Can I try one of those, or does the program automatically go to my camera model? Are they planning to add these other profile choices for my Sony SLT a57?
    The one profile listed in the development menu is "embedded". What is that?
    Thanks, Joanne  

  • LabVIEW vision module w/ usb camera

    I've got LabVIEW 2009 and the Vision Assistant 8.6 and am trying to coordinate them with a usb camera for motion tracking. Eventually I want to be able to track motion at several locations on a glass plate, but currently I'm having difficulty understanding how the Vision Assistant and LabVIEW are supposed to interact. I can take input with Vision Assistant and see from the camera, but I can't perform any of Vision Assistant's functions on the image. Also, I don't think I have a LabVIEW VI for initializing up a USB camera to use with the IMAQ functions. How should I do this?
    Using LabVIEW 2009 on Windows Vista

    Hi dlg,
    There are some great examples in the NI Example Finder (in LabVIEW go to Help >> Find Examples...) that are simple enough to start with.  The basic concept you need to understand the HL Snap.vior HL Grab.vi examples is that you "open, do-something, close".  The more complicated your code, the more extensive the "do-something" is.  However, the same process applies.  The other thing that is important to know is that the Create IMAQ.vi creates a buffer in which to store the image temporarily from the camera.  You then pass a reference to this buffer (the purple wire at the top of the subVIs) to process the image in a later step, if desired, or display the image on the front panel.   
     I hope this helps!
    Kristen H.

Maybe you are looking for