T410 win7 - 64bit installation issue

Hi !
I am trying to install win7 - 64 bit version on a virgin HDD.
The computer boot on the DVD as expected, then when I click "install now" button, an error show up.
'no device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK'
I don't even get to the point where I can choose a custom installation.
Is it a known issue ? What kind of drivers are missing ?
The computer (T410) can run on Win7 - 64bit with my company HD.
My goal is to make my own HD so I can swap between company and personal use.
Thx for any answer.
Solved!
Go to Solution.

It is an advanced format (4k sectors) drive.  If you are installing from Lenovo recovery disks, it just won't work.  Lenovo says that they do not support AF drives in machines that were not delivered with them (pre-T420).  If you are installing from a regular microsoft disk, you can put the required intel storage drivers on a USB thumb drive and add them at the appropriate time.  You can also install if you can find a windows 7 disk that includes SP1.  I am out of town working on dial-up and have a hard time looking things up, but this should point you in the right direction.

Similar Messages

  • Hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225

    hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225 error, but without success. thanks a lot and best regards

    BS heißt "Bull___****". *lol* "Betriebssystem" heißt imemr noch "operating system". GoLive wirste wohl gar nicht zum laufen kriegen. ohnehin würde man es nicht mehr verwenden, weil es noch nicht mal CSS2 voll unterstützt geschweige denn HTML 5 und andere moderne Webstandards. Wenn überhaupt, dann findeste vielleicht noch 'ne OEM CD von Strato oder 1und1 bei eBay. Die haben das damals mit jedem neuen Hostingvertrag rausgehauen. Aber wie gesagt, es ist den Aufwand nicht wert. Illustrator sollte sich durchaus installieren lassen. Eventuell einfach nochmal die Installer im Win XP Kompatibilitätsmodus laufen lassen...
    Mylenium

  • FingerPrint Software Win7 64bit not installing. T61P

    Installed Win7 Premium - no issues.  Lenovo drivers etc. are fine.
    Each time I try to install the Fingerprint software 64bit for win 7 it completes the install then states
    " its not a valid w32 installation".  I'm downloading direct from Lenovo.
    Any ideas?
    Solved!
    Go to Solution.

    phil-san wrote:
    Installed Win7 Premium - no issues.  Lenovo drivers etc. are fine.
    Each time I try to install the Fingerprint software 64bit for win 7 it completes the install then states
    " its not a valid w32 installation".  I'm downloading direct from Lenovo.
    Any ideas?
    Hi,
    Do you mean Fingerprint Software 5.9.2 for Windows 7 (64-bit)?
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73585
    Let me know and i'll report immediately to development team. Thanks!
    Regards,
    Cleo
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Connecting to HP LaserJet 5100 printer on Win7, 32bit PC from a Win7, 64bit PC

    I'm having a heck a time trying to add a printer that is on another machine. The printer is an HP LaserJet5100 and is connected to a Win7, 32bit pc using a pcl6 driver. The PC I want to add this other printer to is a Win7, 64bit. I went to HP Drivers and downloaded a HP LaserJet 5100 pcl6 driver for Win7, 64bit, and ran it, using traditional mode, on the PC that I'm trying to install a printer to. I chose "Add a network Printer..." and then pick the printer that I want to connect to.   I get a Windows Printer Installation pop up that says "Checking for Windows Update. This might take a while..." and then get another popup that says "No driver found". I then get another pop up to locate the driver. Browsing to the driver files that I just download, I find eleven files of the .inf file type, but none of them are the right file. Any help would be greatly appreciated.

    Hello Cinci-Hal,
    Welcome back to the HP Forums.
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Itunes 64 bit version srtill shows *32 in Win7 64bit

    I think this has been answered before, but I couldn't fine the confirmed answer.
    I have used the iTunes64Setup.exe file to install iTunes on my Win7 Pro 64bit.
    But running iTunes still shows a *32 in task manager. This is still whats meant to happen?
    I know *32 means running in 32bit mode, but why is iTunes doing this even with the 64bit installer.
    *Note I dont have any issues, its just bugging me*
    Message was edited by: Felix2009

    Was the 64 bit version out on the day win7 came out?
    A quick search through Wikipedia (I couldn't remember off the top of my head) says that it came out one week later ... Windows 7 on 22 October and iTunes 9.0.2.25 on 29 October.
    The iTunes 9.0.2.25 installer bundle was updated a bit later on, to include QuickTime version 7.6.5 (up from 7.6.4) and Apple Application Support version 1.1.0 (up from 1.0.1). But I don't think the iTunes application itself got updated then ... it would seem odd to have an update for the application with no change in the version number of any description.
    Hmmmm. Perhaps we should have a quick look at the "minimal" iTunes diagnostics on your system. In iTunes, go "Help > Run Diagnostics", uncheck all the boxes, and then click "Next". Cut and paste the top part of the results into a reply. For example, on my XP Pro SP3 box (the one I'm posting from), I see:
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    LENOVO 889703U
    iTunes 9.0.2.25
    QuickTime 7.6.5
    FairPlay 1.5.23
    Apple Application Support 1.1.0
    iPod Updater Library 9.0d11
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.6.0.32
    Apple Mobile Device Driver 1.45.0.0
    Bonjour 1.0.6.2 (118.5)

  • Runtime Error while installing NI FBus Software on Laptop with Win7/64bit

    Hi,
    I am not able to install NI-FBus software im my laptop(Win7-64 bit) as its giving me the below mentioned error:
    Please let me know about this issue and how to resolve it.
    Thanks & Regards,
    Sushruth.
    Solved!
    Go to Solution.

    Hi Martijn,
    I am trying to install NI-Fbus software which contains NI-Fbus Communications Manager(4.0.1), Configurator(4.0.1) and Monitor(4.0). I was able to install it successfully on Windows XP(desktop). But when I tried installing it in Laptop(Win7-64bit) it gave a runtime error. The attached snapshot gives the error details. I tried to run it with Windows XP mode. But it failed again. I have not yet tried with the installer link you have given. For me if I get a trial version of it is also fine since I was trying to install registered version given by my company. Please let me know if you fina a solution to this problem.
    Thanks & Regards,
    Sushruth,
    Student Intern,
    KEMA, Nederlands.
    Attachments:
    Error_Snapshot.docx ‏33 KB

  • Itunes 10.5.1 Completly not working in Win7 (64bit)

    This has been a total disaster update for me.  I am running Win7 (64bit) with all my windows updates current.  I went ahead and updated Itunes to 10.5.1.
    That was a severe mistake.  Itunes crashes every time I start the program.  I notice that genius is running right at the start up and I manage to shut it off but it still crashes.
    So far I have done the following:
    Started Itunes in safe mode----Crashes
    Done a complete clean install and reinstall---Crashes
    Downgraded to 10.5 clean install---Crashes
    Upgraded back up to 10.5.1 started back in safe mode--Crashes.
    I have stopped my anti-virus during all installs and starts and it still crashes.
    My system is clean of viruses.
    No error messages are provided for all the crashes other than "This program has stopped working"
    My frustration is awful.  I really hope they get this fixed or someone can offer a solution.  I am so sorry I ran that upgrade.

    After a day 1/2 of frustration and tears I got Itunes 10.5.1 working properly on my Win 7 64bit Home Edition.
    I concluded that the profile, lets call it blue99 was in some way corrupted. The reason is that I followed the troubleshooting steps outlined here:
    http://support.apple.com/kb/ts1717
    Under the heading of Create a New User Account
    I went ahead and created a new profile, lets call it B99.  Under this new profile, I started up Itunes and sure enough it fired right up, Itunes store came up etc with no crashes.  The strange part is that when it started up, the Itunes user agreement came up.  In the other profile where Itunes would crash, after I would re-install, I NEVER GOT THE USER AGREEMENT.  It would just go through an install, and when it would restart, it would immediately start to crash.
    So now I concluded in agreement with the suport article that it was a "user-specific problem"
    With this info, I took a gamble.  I did not follow the "User specific Troubleshooting" offered in the article.
    Instead I followed the directions found here:
    http://windows.microsoft.com/en-US/windows-vista/fix-a-corrupted-user-profile
    I followed these very carefully.  I copied all of my files found under C:\users\Old_Username folder, in this case that would have been the profile  blue99.  From there I copied the folders in there to the C:\users\New_Username folder in this case B99.  The most important rule of thumb is MAKE SURE YOU HAVE FULL ADMINSTRATIVE PERMISSIONS BEFORE YOU START. 
    I then right clicked on the B99 folder and went to Properties and under the Security tab I gave the profile B99 full permissions.  After this I went back to Control Panel and under User accounts I went and turned the B99 profile into full administrator and took the corrupted profile blue99 and switched it too Standard adminstration.
    I restarted my computer and logged in under B99, started up Itunes and Yay!! Itunes is up and running.  No crashes so far!!  When I was running Itunes on the old profile I went ahead and turned off Genius and Home sharing.  In this new profile I turned on Genius and it worked with no crashes.  But I don't want to push my luck so I turned it off.  Itunes has been running with no crashes.  This is what worked for me, yeah its convuluted but I was desperate!!  I don't even consider this a patch, so much as I cheated to get Itunes running.
    If someone has a simpler way to get Itunes 10.5.01 to run, please let me know!!
    Please note when I started this I had already reinstalled Itunes on the corrupted profile.  I did not install Itunes again on the new profile.  I just started it up. 

  • When installing iTunes 10.5 64bit on my win7 64bit computer I get a weird error message.

    This all started when one day I plugged in my iPhone 4 to my iTunes 10.4 on my PC (win7 64bit) and I got nothing. I got the connection noise and my phone started charging but it would not show up in iTunes. In My Computer, it sees that I have an iPhone plugged in but shows it as a Camera, not a phone, and I am not able to see anything inside said "camera". At this point I decided to clear everything "Apple" off of my computer and manually install iTunes 10.5. Mid download i came across this error message that I have no clue what it is telling me. After clicking "OK" it then tells me "rolling back session" and then tells me that "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services." Since getting this messag I suspected that it was an AMD (apple mobile device) issue. AMD seems to be IMPOSSIBLE to uninstall/delete from my computer... At this point I'm giving up and looking for advice/help on this issue.
    Im lead to believe that it is an AMD issue because iTunes 10.4 reads my iPod Shuffle perfectly but wont read my iPhone 4 or a friends iPhone 3g.
    Thanks in advance for taking the time to read this!! Any help would be greatly appreciated because I dont want to reformat

    Hey donovanjj,
    Thanks for the question. Let’s try to recreate your SC Info folder:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/TS1277
    If the above does not resolve your issue, you may want to look over the following resources:
    iTunes 11 for Windows: If you have trouble burning a disc
    http://support.apple.com/kb/PH12349
    iTunes for Windows: Additional troubleshooting tips for burning issues
    http://support.apple.com/kb/TS1374
    Thanks,
    Matt M.

  • Oracle Demantra 7.3.1.5.0 Installation Issue

    Dear All,
    I have a Win 7 64 Bit OS on my Laptop with 16 GB Memory and Core i7 Processor.
    I Downloaded both 32 bit and 64 Bit Windows based Oracle Demantra 7.3.1.5.0 versions from Oracle's E-delivery Successfully.
    Prior to the Installation of Oracle Demantra 7.3.1.5.0 using Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
    I created the required Tablespaces as
    create tablespace TS_DP datafile 'F:\oracle\product\10.2.0\oradata\test\ts_dp01.dbf' size 1000M;
    create tablespace TS_SALES_DATA datafile 'F:\oracle\product\10.2.0\oradata\test\ts_sales_data01.dbf' size 500M;
    create tablespace TS_SALES_DATA_X datafile 'F:\oracle\product\10.2.0\oradata\test\ts_sales_data_x01.dbf' size 100M;
    create tablespace TS_SIM datafile 'F:\oracle\product\10.2.0\oradata\test\ts_sim01.dbf' size 500M;
    create tablespace TS_SIM_X datafile 'F:\oracle\product\10.2.0\oradata\test\ts_sim_x01.dbf' size 100M;
    create tablespace TS_SALES_DATA_ENGINE datafile 'F:\oracle\product\10.2.0\oradata\test\ts_sales_data_engine01.dbf' size 500M;
    create tablespace TS_SALES_DATA_ENGINE_X datafile 'F:\oracle\product\10.2.0\oradata\test\ts_sales_data_engine_x01.dbf' size 100M;
    All Tablespaces are create successfully.
    Also I set the system JAVA environment variable as
    JAVA_HOME with value as %JAVA_HOME%\bin;F:\oracle\Middleware\jdk160_24;C:\Program Files (x86)\Java\jre1.5.0_22
    (Earlier I used jdk1.6 for Middleware which I removed using Add Remove from control Panel).
    As per the Java requirement for Demantra (which requires - JDK 1.5.0_22 only) I Installed. jdk-1_5_0_22-windows-i586-p.exe and jre-1_5_0_22-windows-i586-p.exe. During the Java JDK Installation I get the following error
    Java Virtual Machine Launcher
    Could not find the main class. Program will exit.
    After JDK Installation in spite of the main class error. I started Demantra 64 Bit 7.3.1.5.0 setup.exe installation
    It goes fine with all the wizard steps of selecting the user, jdbc connection, database validations, standard applications,
    user execution until it comes across the following error during installing wizard step as :
    Failed to Install JDK
    Failed to complete JDK 1.5.0_22 Installation.
    Please Install JDK 1.5.0_22 manually.
    Further it looks for Adobe installation too, where I find the next button grayed out. and the installation stops unless cancel
    button is pressed.
    I tried even installing thru Demantra 32 Bit 7.3.1.5.0 setup.exe  (same error for both 32 bit and 64 bit too)
    What can be the root cause of the error :
    1) Is it because of the JDK Error (Could not find the main class. Program will exit)
    2) Is Oracle Demantra  7.3.1.5.0 setup.exe certified to be installed in Win 7 64 Bit or 32 Bit ?
    3) Do I need to Install JDK before Demantra Install. (As mentioned in the document demantra installs JDK too)
    4) Is the system Environment Variable as
        %JAVA_HOME%\bin;F:\oracle\Middleware\jdk160_24;C:\Program Files (x86)\Java\jre1.5.0_22
          Correct or Wrong ?
    I have been trying the Installation of Java and Demantra umpteen times,thru various screen shot and documents,
    for last 5 days,  still the same issue ?
    What is the correct Java version for Demantra 32 Bit 7.3.1.5.0 and Demantra 64 Bit 7.3.1.5.0
    What is the overall root cause of the installation failure.
    Thanks
    Ajaz

    Hi,
    Kindly refer my blog link:
    http://obieeelegant.blogspot.com/2011/10/windows-7-home-premium-edition-is-not.html
    from exp..with obiee11g installation with win 7 64bit i have face so many issues..
    http://obieeelegant.blogspot.com/2011/09/obiee-11g-111150-software-only.html
    obiee11.1.1.5.0(Software Only Install) windows 7  64bit Installation Error
    OBIEE11g software only install configuration get hangover on win 2008 64
    ==========
    Note: some time it works with simple install option then rebooting mechine/restarting mechine it's not working.then i had OWC and discussed with MY Oracle Support team...they confirmed it's not support. please refer the certification matrix excel file in my blog link
    Hope it's clear...
    Thanks
    Deva
    Edited by: Devarasu on Nov 25, 2011 11:18 AM

  • Changing Win7 64bit to 32 bit on Satellite Pro C660-16N

    Hello.
    >...Satellite Pro C660-16N - Windows 7 64bit Home Premium preinstalled...
    Does anyone know what the best route is to change Win7 64bit to Win7 32bit. Does this model have a 32bit install option on HDD recovery?
    Or will it have to be a clean install from a Win7 32bit DVD.
    Many thanks.

    I presume this notebook is offered with 64bit version only (specification) and there is only one way to install 32 bit OS version you must install it using original Microsoft Win7 32 bit installation disc.
    Please note: for OS activation you cannot use product key from the sticker. You must buy new licence for your own installation.
    By the way: check also if this notebook model is supported for 32 bit version. You can do this on Toshiba support and download page under http://eu.computers.toshiba-europe.com
    If you have more questions you are welcome.

  • CS4, Win7 64bit Media Encoder Errors

    On a fresh install of Win7 64bit, ASUS P6T Deluxe V2 motherboard 12GB RAM, NVIDIA GTX 260 graphic card and all updates (software/hardware), I'm having a bear of a time exporting even a bars/tone test project from CS4. Here is the sequence of events:
    1)Create/edit project, export media, I get warning message that an update of Media Encoder is available (but I've already double checked that I'm running CS4 4.2.1 with multiple computer restarts). AME version I have is 4.2.0.006
    2) choose export format, location, etc. (I've tried various export formats with no difference in resulting error messages)
    3) dynamic link exports the file to AME...BUT....AME doesn't open
    4)When I've manually opened AME beforehand, CS4 will export to the queue
    5)On attempt to encode I get the message:
    - Source File: C:\Users\Oren\AppData\Local\Temp\Zi8 Test_7.prproj
    - Output File: E:\Choco Rehab2.f4v
    - Preset Used: Custom
    - Video:
    - Audio:
    - Bitrate:
    - Encoding Time: 00:18:29
    2/6/2010 9:42:25 AM : Encoding Failed
    Could not read from the source. Please check if it has moved or been deleted.
    6) I've looked in the folder and indeed, the source file doesn't exist...but it keeps creating this same message, regardless of what project I try to work on.
    I've done a re-install (with cleaner script) TWICE already and it is really a time-killer (especially when I defrag the drive in between installs). I beseech Harm and all the other gurus to offer some sage wisdom. Thank you.

    I'm the only user on the computer, and I do have full rights to the C: volume. By default, I should be the administrator, is that correct?  Thanks again for your offer to help and your invaluable assistance to all Adobe users. With your help (and the upcoming Mercury engine), I hope to have a Matrox-free system eventually. I still have to use my XP-32 matrox and CS3 system until I can work out the kinks that keep me from exporting completed projects on my newly build Win7 CS4 system.
    Let me know if anything stands out to you that I'm missing. I'm a bit frazzled currently.
    -Oren

  • Applicatio​n on Win7 64bit throws error -50103, but not on Win XP 32bit host

    LabVIEW application newly installed on Win7 64bit host throws error -50103.
    Same aplication deployed from same installation disk on Win XP 32bit host have been working for 2 years withourt problem.
    I did have a problem with importing the MAX configuration from the Win XP 32bit machine to the  Win 7 64bit machine.
    My solution was to install all the drivers from my most recent Devaloper Suite 2012 DVD.
    After that the executable did run fine, except when the variuos DAq tasks are executed for the second time in a loop it thows error -50103.
    If i click ok on the erro popup, everything else works fine until in the next pass of the loop I get the same error.
    Why would I get error on one host but not on the other one?
    How do I fix this?
    Scientia est potentia!

    A common error that you can find numerous posts about with a search
    http://forums.ni.com/t5/forums/searchpage/tab/mess​age?filter=location&location=forum-board%3A170&q=5​...

  • Hi I am running a dual core Win7 64bit PC with Firefox Regular and Nightly on it. I also have 32bit Win XP Virtual PC on the same PC with Firefox... How do I sync all of them to give me the same bookmarks, history, cookies and passwords ??? TIA... Rick...

    Hi... I am running a dual core, Win7 64bit PC, with Firefox Regular and Nightly on it... I also have 32bit Win XP Virtual PC on the same PC with Regular Firefox... How do I sync all of them to give me the same bookmarks, history, cookies and passwords ???

    I assume that you have separate Profiles for the Release and Nightly installations.
    https://support.mozilla.com/en-US/kb/What+is+Firefox+Sync
    Add each Firefox Profile to your Sync account as a '''new device'''. <br />
    https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync

  • .xlsm File use from Excel 2013 64bit/Win7 64bit to Excel 2013 32bit/Win8.1 64bit - Component Removed (not API related)

    Work Environment:  Excel 2013 64bit/Win7 64bit
    Home Environment: Excel 2013 32bit/Win8.1 64bit (1 desktop and 1 laptop)
    I am developing an an .xlsm file at work (with Lists and a single form with controls linked to a worksheet ControlSource). It works and saves all day long just fine in my work environment. I save the file to either a USB drive (or DropBox - makes no difference)
    and then open the file on my home computer. I can open the file the first time with no problem and with no error messages. But then when I try to save the file Excel 2013 32bit most often tells me that it has removed a component. But it doesn't tell which
    component it has removed. After that, if I close the file and try to reopen it, it won't reopen. I get a series of error message: [1] file path errors (error 75) [2] Excel has stopped working errors. [3] Excel hasn't enough memory to complete the operation,
    [4] Excel will close. So I click the close button on the last error message and Excel disappears. I say disappears, because its not really gone. Mind you, its not listed in the Task Manager at this point. But, if I then click the Windows Taskbar icon to start
    Excel, Excel will sometimes automatically open up with the file that I was trying to open before, already up and running, i.e. I do not select the file to open it - it just appears. Other time Excel just repeats the series of error messages noted above.
    The strange part is, once this file has been corrupted, I can still take it back to my work environment, fire it up on my work computer, and it works just fine. No error messages, no saving problems.
    I have totally uninstalled and reinstalled Office 2013 (HUP Click to Run) on both my home computers and it makes no difference.
    I can say though, this is driving me nuts. Anyone have any suggestions or ideas?
    phillfri

    I think I solved the issue.
    Step 1: Moved all my code from the Worksheet_Open event to the Auto_Open Macro.
    Result: File would open from inside Excel but when opening by clicking on the file in Windows explorer I would get the error msg "There was a problem sending a command to the program."
    Step 2: Apply FixIt 20074. Note that to get this FixIt to work in Windows 8.1 you MUST save the FixIt file to your desktop and run it from there. If you follow the instructions on the FixIt page - download and run - you will get the error msg "This Fixit
    does not apply because the computer does not have the expected software (Excel.exe)."
    Excel 2013 definitely seems to have some bugs when starting a macro enabled file. I have seen other comments on the internet about the Excel workbook_open event actually failing to run all the VBA commands that are put into it.
    Environments:
    [1] Home: Microsoft HUP Click-n-Run Office Professional 2013; Windows 8.1, 64 bit; Excel 2013, 32 bit.
    [2] Work: Enterprise Microsoft Office Professional 2013; Windows 7, 64 bit; Excel 2013, 64 bit.
    phillfri

  • Application Runtime Environment installation issue

    Hi,
    JDeveloper 11.1.1.3.0
    OS: Solaris SPARC
    I am trying to install the application runtime environment and I am getting the below error. Please advice me on how to resolve this issue.
    JAVA Version in Solaris SPARC :
    weblogic@comm1 ~/Installs $ java -version
    java version "1.5.0_24"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_24-b02)
    Java HotSpot(TM) Server VM (build 1.5.0_24-b02, mixed mode)
    Error:
    weblogic@comm1 ~/Installs $ cd Disk112/
    weblogic@comm1 ~/Installs/Disk112 $ cd Disk1/
    weblogic@comm1 ~/Installs/Disk112/Disk1 $ ./runInstaller
    ./runInstaller: /apps/wls/Installs/Disk112/Disk1/install/solaris/runInstaller: cannot execute
    ./runInstaller: syntax error at line 299: `count1=$' unexpected
    Thanks,
    Rajesh

    Hi,
    I have installed the jdk 64bit version and tried the application runtime environment installation but I am still getting the same old error. Here it is..
    weblogic@dwlsalescomm1-c2 ~/Installs/Disk112/Disk1 $ ./runInstaller -jreLoc /apps/wls/WL10/jdk1.6.0_21/
    ./runInstaller: /apps/wls/Installs/Disk112/Disk1/install/solaris/runInstaller: cannot execute
    ./runInstaller: syntax error at line 299: `count1=$' unexpected
    JDK Version:
    WL10/jdk1.6.0_21/bin $ ./java -d64 -version
    java version "1.6.0_21"
    Java(TM) SE Runtime Environment (build 1.6.0_21-b06)
    Java HotSpot(TM) 64-Bit Server VM (build 17.0-b16, mixed mode)
    Please advice me on how to resolve this installation issue.
    Thanks,
    Rajesh
    Edited by: Rajesh on Mar 15, 2011 8:28 AM

Maybe you are looking for