T410i keeps doing restart if i am not in home wireless network!!!

Good day,
I am having a problem with my band new laptop ( Lenovo t410i – windows  7 professional ) less than a week old!!!
It keeps restarting by itself!
In the first few days nothing was happening, but starting from today suddenly a blue screen with info in it ( I could not read as its goes too fast ) appears then the laptop do restart!!! ( more than 7 times in 1 hour !) and that happens only when i am not using my home wireless!
I don’t know what to do!!!!
Please help me
http://d.imagehost.org/0625/Untitled_7.png

i stil have the same problem, but this time i got this message
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional information about the problem:
BCCode: c4
BCP1: 0000000000000091
BCP2: 0000000000000002
BCP3: FFFFF80002DFAC40
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Similar Messages

  • Hi, I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand new a while ago i was trying to connect to my home wireless network it said that your airport is not configured then I restarted the system but it didn't restart it shows the "

    Hi,
    I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand-new (the 4th time to use the device) a while ago i was trying to connect to my home wireless network it said that the connection is timed out so i clicked the airport sign on the top it said that your airport is not configured then I restarted the system but it didn't restarted it showed the grey screen with the apple logo and the spinning wheel for more than 10min so I tried the force shutdown by pressing the power button till it switched off I waited for 5min then pressed the power button to start or boot the system and again the grey screen with the apple logo and the spinning wheel, I waited for more than 20min nothing changed, any solution please?
    Your help is really appreciated"

    Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
    Thanks really appreciating your help

  • My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not workin

    My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not working. I have two older imacs and a wii that connect to the router. Any thoughts? Thanks

    - Reset the iPod. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Setting>:General>Reset>Reset Network Settings.
    - iOS: Troubleshooting Wi-Fi networks and connections

  • I have an eMac which I want to connect to my home wireless network. My router is D-Link-601 tech 802.11n. My emac is wireless ready but does not contain an airport card. Do I need a card and an airport station? What else?

    I have an eMac which I want to connect to my home wireless network. My router is D-Link - 601 tech. 802.11n. My eMac is wireless ready but does not contain an airport card. Do I need a card and an airport station? What else?

    You need the Airport card OR Airport Express but not both.  Considering the age of your machine, I recommend Airport Express as you will find other uses for it whenever you replace the eMac.
    To set up the AE, you do need OSX 10.4 or higher.

  • Hp6600 does NOT recognize my wireless network IN THE WIZARD

    My hp6600 does not recognize my wireless network. It recognizes others in the area but not mine I have tried the network wizard several time and the online help but it's not working.  I bought this machine especially so that I can print wirelessly.  It would cost me $100 to have someone from Geek come in, that's ridiculous.  i should be able to set up my own printer. I set up a hp8600 at home. 

    Hi @fedup22,
    Welcome to the HP Forums!
    I am sorry to hear that your HP Officejet 6600 is not recognizing your wireless network, but I am happy to help!
    For further assistance, I will need to know some additional information:
    If the printer is able to make copies.
    If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. 
    In the meantime, please see the following:
    This printing guide, Print Jobs are Stuck in the Print Queue as it address the fact the printer is offline.
    Printer Does Not Maintain Wireless Connection. (Once established this guide will help you maintain the connection.)
    This website as a lot of information on wireless printing. Wireless printing center.
    Hope this information helps, and have a good day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • HT4259 I have a Netgear wndr3400 and I can "join a wireless network" but can not "extend a wireless network" on my Airport express.  Does anyone know why?

    I have a Netgear wndr3400 and I can "join a wireless network" but can not "extend a wireless network" on my Airport express.  Does anyone know why?

    Sorry, but "Extend a wireless network" is a proprietary Apple setting that will only work if you have another Apple router.
    It is not compatible with devices from other manufacturers.

  • Macbook Pro is not recognizing remembered wireless networks and does not sign on to them automatically anymore.

    When trying to connect to my home wireless network, my computer doesn't recognize my network, or any network as being accessed before.  It doesn't remember any networks.  I even went into the advanced settings and made sure to check the box that makes it remember networks, and it still doesn't remember them.  I am able to connect to my home network manually, but it will not automatically connect when I open the lid after it being closed, or when I turn off the wifi and turn it back on. What should I do?

    Thank you for your suggestion, and I have, (I actually tought that may have been the problem initially) unfortunately it was not successful. But I did go onto the Keychain Access and fixed the passwords in those and then deleted and reissued my prefered networks and it happened to work out just fine.
    Thank you again, clintonfrombirmingham!

  • Airport Express (1st generation) does not reconnect to wireless network after router is cycled on/off

    Operating System: os x 10.9.1
    Airport Utility 6.3.2
    Airport Express 802.11n (1st generation)
    Linkus router: Model WRT310Nv2, Firmware Version 2.0.01
    Motorola Cable Modem: Model 2210-02, Firmware 7.7.3r5
    The Airport Express (AE) is setup to join my wireless network using Airport Utility.  A printer is connected to the AE with a USB cable.  After the setup the AE light is green and the printer can be accessed over the wireless network.
    The problem starts if the router is cycled off/on.  Now the AE will not rejoin the wireless network and there is a non-flashing amber light.  If the power to the AE is cycled off/on the AE reconnects to the wireless network.
    This is about as handy as a screen door on a submarine.
    Is it possible to see the setting of the AE the same way the modem and router settings can be accessed?   Can this issue be fixed?

    If they send you a replacement printer it will have ink tanks with it.  You can store the ink tanks from your current printer and use them later on you "new" printer if you wish.  Store them nozzle-up so they do not leak.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • TS1559 could not scan for wireless networks.

    Wifi not working on my Iphone.  All I get is "Could not scan for wireless networks."  Does anyone have a solution to this problem?

    If no change after powering the iPhone off and on and/or after a reset which is similar to a computer restart, try resetting network settings on the iPhone at Settings > General > Reset.
    If no change after that, try restoring the iPhone with iTunes as a new iPhone or not from the backup but update the iPhone's backup immediately before doing so for later use.
    If no change after restoring the iPhone with iTunes as a new iPhone or not from the iPhone's backup, the iPhone has a hardware problem.

  • TS1398 'could not scan for wireless networks' problem

    I keep getting 'could not scan for wireless networks' whenever I try to connect. I have turned wi-fi off/on, restarted my network, iPod touch, and the home modem. What are some other options for fixing this problem?

    Try:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod

  • HT204409 I am trying to log onto my wireless connection but it keeps telling me I'm unable to locate any wireless network.  I know there are several networks nearby. Is this a problem with my phone or my router?

    I am trying to log onto my wireless connection but it keeps telling me I'm unable to locate any wireless network.  I know there are several networks nearby. Is this a problem with my phone or my router?

    I found a solution that has worked on both iPhone 4's I have that have had the same issues, and also including not being able to download updates in the App store.
    Go to Settings > WiFi and turn it OFF.
    Next go to General > Cellular > Cellular Data and turn it OFF
    Next go back to Settings > WiFi and turn it ON, (wait a few seconds for it to sync with your network)
    Finally go back to General > Cellular > Cellular Data and turn it ON.
    I had the same issues on both my wife's phone, and my own, and it fixed it immediately without changing any proxy settings or reboots, (which I did try on my phone and did not work, but did not try on my wife's phone)
    Hope this helps!

  • "could not scan for wireless networks" iphone6 or iOS 8?

    new iPhone 6 with iOS 8.  Wifi works fine for a few hours and then drops.  The wifi connect screen sits there spinning and if I attempt a manual connecation I get the message:
    "could not scan for wireless networks"
    Only solution so far has been rebooting. 
    No issues with older devices and iOS 8.  Just the iPhone 6.
    As this issue seems to come out every time Apple release new hardware I am hoping it's just a bug that will be squashed and as such wanted to bring it up on the forums.  Will also report to support. 

    Hi Uncle Ook,
    From what I've read, other iPhone 6 users have experience this issue too. I've read that by doing these steps it may help resolve your issue:
    Open Settings
    General
    Reset
    Reset Network Settings
    Enter your Passcode if prompted
    Tap Reset Network Settings
    What this will do is reset your network settings. By doing this we'll reset any issues to default settings that'll help fix your issue by setting the network settings to default settings.
    You'll see a series of different screens. This is normal. Just wait until it's completely done. You'll know when it's done when it takes you to the lock screen. You'll need to unlock your iPhone after that and try reconnecting to your wireless network that you were attempting to join. I'm not sure however that these steps will help permanently or temporarily, but I'm sure Apple will fix this issue within the next update that comes out. I hope this helps, and if you have any other questions please don't hesitate to ask.

  • Iphone 4s "Could not scan for wireless networks"

    I haven't had any issues with wifi except for today, when I noticed that my phone would not recognize my home wifi. I checked, and the wifi here is working fine. My roommate's iphone is connecting fine. My laptop is connecting fine. When I try to connect manually to my network, I get the message "could not scan for wireless networks". I have tried restarting my phone. I've tried just turning wifi/airplane mode on and off and there is no improvement. I've also reset network settings and still nothing.
    Forgive my ignorance, but I am not a tech person so if anyone can help you kind of need to phrase things like you're talking to a small child. Please though, if anyone has any suggestions I would SO appreciate it!

    Could this be the problem?
    iPhone 4 Modem Firmware : 3.0.04
    iPhone 4S Modem Firmware : 2.0.10
    Wifi is working on my iPhone 4, NOT on 4S -
    Why is my new 4S I got yesterday using a 2.0.10 firmware, isn't that old?! Isn't the newest 4.0+?
    I am so tired of trying to figure this out.
    The Wi-Fi addresses in the About settings are different on both phones too.

  • I have an ipad first generation.  I am trying to connect to a linksys router and it is not finding the wireless network.  what do i need to do?

    I have an ipad first generation.  I am trying to connect to a linksys router and the ipad is not finding the wireless network.  What do I need to do?  Thanks for your help.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Can't use apps because it says I'm not connected to wireless network

    How do I use apps if it keeps saying I'm not connected to wireless network when I'm connected to wifi and have data connectivity??

    rixxy12345 wrote:
    How do I use apps if it keeps saying I'm not connected to wireless network when I'm connected to wifi and have data connectivity??
    Which apps?
    Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Maybe you are looking for

  • Iphone damaged on receipt why do I have to pay for repair

    We have a family contract with Vodafone, we were due an upgrade towards the end of last year and wanted an iPhone 5c in time for Xmas. We contacted Vodafone  towards end of October 2014 and they said we could anytime now so we ordered the iPhone. We

  • 64-bit Windows Vista USB synchronization

    Is Palm developing a fix for 64-bit Windows Vista USB synchronization? Or is Bluetooth the only option?  jk Post relates to: Palm TX

  • Install won't run

    I just downloaded Oracle 8i. I can run the autorun.exe and it brings up a screen where I choose Install/DeInstall Products. However, nothing happens after that. The window closes and nothing else runs. I've tried burning the files to CD - same proble

  • How to Activate Datastore loaded with Transformation.

    Hi Gurus! When I used update rules and infopackages to load an ODS (with activate data  flagged) loaded records were automatically activated. Now I'm starting to use transformations and when I load data to Datastores I have to manually activate loade

  • Servlet not found error

    Hi everyone, i am trying to write a chat application using applet,servlet and RMI. so i have my servlet and aaplets accordingly... but when i put my servlet and applets in their respective folder of tomcat,i am getting and error..which is as follows.