T410i SSD user and master password problem after firmware upgrade

Hello.
I have problem with my Corsair Force 3 120GB SSD. After firmware upgrade of SSD my master and user HDD passwords are no longer valid. I'm stuck on BIOS screen and cannot unlock my SSD. After firmware upgrade procedure i got BSOD. Same happened during firmware upgrade on my previous SSD (INTEL X25-M 80GB) but after restart everything was OK. Please help!
Previous firmware version: 1.3
Current firmware version: 1.3.3
SSD connected to another computer shows RAW partition data, but firmware version is 1.3.3 - seems like update was successful.

My X301 Intel x18 got bricked also after a BIOS update then secure erase (was going to sell it). I plugged it to a USB kit and onto a desktop and it was recognised and able to format. But plugging it back to the lenovo it is still a brick. My lucky star there was warranty it was replaced by lenovo.
You may want to try it and extract the data, if it works. And hopefully you can still format it and made it work pluggin back to the lenovo.

Similar Messages

E 72 GPS and E-mail problem after firmware upgrade...

Hi - to all the gurus out there,
1. i upgraded my firmware to 31.023. Now My GPS (whether using Ovi Maps or Google Maps) locks only at home ( probably the place of my last GPS lock before the upgrade- my guess). Tried many times but it simply refuses to lock anywhere else.-- annoying - someone help please
2. The mail client has become unbearably slow and doesnt update using 3G or GPRS anymore. I checked all access points selections and everything else in settings. In fact except for WLAN, its become a `Non e-mail capable` phone.
3. Skype only lets me IM now??????? weird!!
4.Snaptu only logs in on WLAN.
5. and last but not the least.. in the chat setup. the keyboard doesnt work anymore.
waiting for some help
thanks

Ok, Now the GPS seems to have resolved itself after I deselected `Network Assisted`, but initial lock time seems much longer. Maybe that was the problem.

Problems after firmware upgrade to 3.2.10.30101

I have just updated my Iomega Home Network Drive (Cloud Edition) to 3.2.10.30101. How I wish I had looked at this forum before I did! Had the same problem as described elsewhere during the firmware update with never getting past the "Restarting" message.
On start-up now the network drive is not visible until, as suggested by Steven_Lenovo in other related discussions, th e network cable is removed and reconnected. Then it is visible to Windows Explorer and can be "pinged". So no data loss - hurrah!
However, when starting up the EMC Storage Manager interface I cannot get to the Home Screen (I get the "Restarting" Page) unless I wait for around about an hour, and it is only after an hour that the white power light stops flashing.
Pointless submitting a ticket as I have had my network drive too long, but maybe someone can come up with a better fix than re-plugging the network and waiting for an hour every day, and If not, maybe it will make people think twice before installing this upgrade (and earlier ones looking at the number of post-firmware update problems).
Solved!
Go to Solution.

Hello LesleyG franmart,
Is the unit fully booting? It should have a solid white power led once fully booted.
If the unit is not fully booted, the web interface will not fully load and usually show a progress bar or a restart message
If the unit is taking a very long time to boot, but does eventually finish you may want to try the following if you have not already.
Do a hard reset
To do this (This is not Data Destructive):
#1. Press and hold down the reset button for 4 seconds.
#2. Then remove the power cord while still holding the reset button.
#3. Wait about 5 seconds and then plug the power cord back in while still holding the reset button.
#4. Release the reset button after 4 more seconds.
Cycle the unit.
#1 Turn of the device
#2 Disconnect the network cable
#3 Turn on the device
#4 Wait a few minutes then connect the network cable
Connect the device directly to a computer
#1 Turn off the device
#2 Disconnect the network cable from the router and plug it direct into the computer
#3 Turn on the device
#4 Allow for the unit to boot up
#5 Open the command prompt or terminal on your computer
Command Prompt (PC) : Start > "cmd" in the search (no quotes)
Terminal (Mac) : Finder > Applications > Utilities > Terminal
#6 Run the following Command arp -a (there is a space between both)
#7 Look for a Physical Address starting in 00-d0-b8 and there should be an IP Address associated with that.
That IP Address will be where the device is located and you should be able to access the web interface by
typing that IP into your browser.
If the above doesn't help, a full factory reset from the web interface or firmware reimaging may be needed.
Contact the Lenovo Support by phone or chat to request the USB imager (This is data destructive).
Please ensure that you have processed any and all data recovery or backup attempts before you proceed to
this option.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

E66 GPS problem after firmware upgrade to v.500

hi there, sorry but im going crazy with this problem....
id like to know who has a nokia e66, performed the v.500 upgrade and has GPS that doesn't work anymore after doing the upgrade, am i the only one?? what did the new upgrade changed? how to fix this??? i did all i could think of.. format memory card, reset phone, reinstall firmware etc etc. before upgrade it was working like a charm, getting signal fast and all. tried to enable and disable a-positioning, etc etc, resetted, removed battery etc etc.... and i upgraded the firmware with Nokia Ovi Suite for the note.. so the "good" stuff.
gabrio

famous007 wrote:
Hi I am also having the same problem. I upgraded my firmware to version 500.21.009 and my gps is not working. Anyone has a solution to this problem. Will the latest firmware upgrade resolve this issue?
@famous007
Presumably you have this version of Ovi Maps installed upon your E66:http://europe.nokia.com/support/product-support/maps-support/compatibility-and-download#/nokia-e66/
If you go to Menu > Tools > Settings > General > Positioning > Positioning methods - try temporarily disabling all except Integrated GPS, go outside away from tall buildings if feasible launch Ovi Maps and wait 20 - 30 minutes for first positional fix to be established.
Happy to have helped forum with a Support Ratio = 42.5

Nokia 5800 XM: Problems after firmware upgrade

Hello all,
I upgraded my firmware to V 50.0.005, cause that's what Ovi store told me to do in order to download ovi maps.
However, now, when I open my internet browser it automatically opens full screen which is really not my preference. But when I click "options" it just shuts down.
Also when I enter Ovi store now, at first it seems fine but after loading an app page it crashes saying no more than "Something went wrong".
Thanks in advance for your help.

Hello, I'm afraid I don't have an anser to this, but I too appear to have the same problem. After upgrading to v 50.0.005 I get the following problems relating to web browsing. 1. If I attempt to download anything I get the following error :- Script alert: A critical internal service has failed. after which I click on OK and the browser/application shuts down (and the connection closes). This happens when web browsing e.g. when attempting to download a BBC podcast or using the Ovi Store application to download something. Also it happens whether I'm using my provider's 3G network or a wireless network. 2. If in the browser I click on "options" the browser shuts down. I admit that in order to get Ovi Maps I have previously debranded my phone in order to get the necessary firmware updates, but I haven't had this problem with any of the previous ones. FWIW the Ovi Maps application appears to work well and manage to keep the internet connection up for a long period when online. Does anyone else have this problem? Can anyone suggest anything or will we simply have to hape that the next firmware update comes quickly and cures the problem? Thanks in advance.

WRT610N problems after firmware upgrade to 1.00.03.15

I've been using my WRT610N (hardware version 1) for years running firmware version 1.00.00.18.
I always used the 5Ghz SSID from laptops, iPad and iPhone and never bothered about the 2.4Ghz SSID.
Due to more frequent "cannot connect to <5Ghz SSID>" problems recently I decided to upgrade to the latest firmware version (1.00.03.15). Immediately since this firmware upgrade, the 5Ghz SSID is invisible to all devices except (strangely) my iPad. All other devices see only the 2.4 Ghz SSID.
I've tried switching channels etc. but to no avail.
Clearly, the firmware upgrade is the only thing here that changed but I'm at a loss to get the 5Ghz SSID back into action.
Anyone has an idea what's wrong here? The only remedy I can think of is to revert back to the old firmware version but somehow that feels wrong.
Thanks in advance,
Rob V.

rverscho wrote:
I've been using my WRT610N (hardware version 1) for years running firmware version 1.00.00.18.
I always used the 5Ghz SSID from laptops, iPad and iPhone and never bothered about the 2.4Ghz SSID.
Due to more frequent "cannot connect to <5Ghz SSID>" problems recently I decided to upgrade to the latest firmware version (1.00.03.15). Immediately since this firmware upgrade, the 5Ghz SSID is invisible to all devices except (strangely) my iPad. All other devices see only the 2.4 Ghz SSID.
I've tried switching channels etc. but to no avail.
Clearly, the firmware upgrade is the only thing here that changed but I'm at a loss to get the 5Ghz SSID back into action.
Anyone has an idea what's wrong here? The only remedy I can think of is to revert back to the old firmware version but somehow that feels wrong.
Thanks in advance,
Rob V.
Try setting 5GHz network as "Wireless-N only" instead of MIXED. That should help resolve this issue.

How to resolve "Contacts has stopped" and "Sync experiencing problems" after ICS upgrade?

After receiving the Droid Bionic operating system upgrade yesterday, my phone has lost its record of all my contacts, is unable to retrieve them from Vzn Backup, won't synch with my gmail contacts, and won't even allow me to dial phone calls. Does anyone know how to resolve this?
I'm getting the error message when I tap the People or Phone icons:
Unfortunately, Contacts has stopped.
When I go to Accounts & Sync, I get a Sync error, and the message
Sync is currently experiencing problems. It will be back shortly.
(I have been getting that message since yesterday.)
And under Settings > Backup Assistant+ Contacts, when I tell it to Synch Now,
Unfortunately, Backup Assistant+ Contacts Client has stopped.
I tried the Verizon chat service, and was very frustrated to be told that I either have to call Tech Support (hard to do when your phone won't dial!!!), or go to a store for them to fix it in person.

Good to find this forum on Android issues... Thanks Verizon!
    I also started getting the 'Unfortunately, contacts has stopped' after the new OS update. I want to add my 2 cents since I found a very different fix (after trying the other stuff)...
My "contacts stopped" problem seemed to come and go, but actually I think it was more subtle, at least in my case, only affecting some of my contacts but not others... When I finally got tired of putting up with it, I tried a number of Power-Offs, hoping to clean up something (hey, it often works for Microsoft OS). At this point, I noticed that some contacts would get the errors but not others. Then I found this forum, and I was optimistic that the clearance of the cache data would fix it, as it had for others... but not so lucky, in my case.
   FINALLY, I decided to take a look at my Google contacts online. There were any number of duplicates that I don't recall creating. Perhaps emails or phone calls occasionally produce some of these? There were also a few contacts that I did not recognize at all (maybe due to the same causes?). SO, I cleaned up the online version of my contacts, went back to my phone, and now the contacts are no longer "stopped"!
   I hope this can help someone. I wish I had thought of it earlier.

Problems after firmware upgrade to 7.6.3

Just want to report that updating to 7.6.3 caused my router to loose LAN and WiFi connection about 15 times in a week. I never had problems before and only reason I went to 7.6.3 was to be able to use DLNA at my home; however, these connectivity issues forced me to go back to previous firmware version 7.6.1 which does not support DLNA. Note that since I bought my airport express over a year ago I never had problems.
If it helps in any way, the devices I have connected are: 2 Windows 7, 1 Windows Vista, 1 MacBookPro, 1 iPad, 2 iPhones, 1 TV over wifi, 1 TV over LAN, and a apple TV.

I had the same problem going to 7.6.2 from 7.6.1.
Going back to 7.6.1 took care of the frequent disconnects. I haven't tried 7.6.3 yet.

Problems after firmware upgrade befw11s4!

I just upgraded to firmware 1.52 to try and get my wireless network working better with my vista laptop. It has caused nothing but trouble. The router keeps going offline and I have to keep reseting it! I really do not want to shop for a new one!
Thanks,
Brian in MI

Did the reset thing several times. I have since rolled the firmware back and reset a few times. I can only connect to the wireless on this router now with security disabled. I have tried all the channels and different security settings to no avail. There can be only one solution now and that is to buy a newer router and I am sorry to say it won't be a linksys. Thanks for the replies.
Brian

Problem with both user and cmos password

I have problem with my user and cmos password, can formating clear the passward with remove the cmos battary.

It depends on the model. Formatting will not touch the BIOS or power on passwords but will take away the Windows user password and allow you to have a different one, but will kill all the data on the machine. Removing the CMOS battery might clear the BIOS password and power on password, but on most current laptops even that will not help. The BIOS data is on a chip that holds its contents even when all power is removed.

User and owner password have same access permissions

Hi,
I'm trying to implement standard encryption (128 bit RC4 for now), and as far as I can tell it works.
The one thing that worries me is that, even when I use the owner password, I have restrictions. I get access to the document with (and only with) the user and owner passwords, but in both cases I can't print if I disable it. In PDF 32000-1:2008, pag. 59 it says: "opening the document with the correct owner password should allow full (owner) access to the document". Both Acrobat Reaqder 7.0 and Foxit do this, and I've tested other encrypted documents that show the same behaviour.
What can I do to enable printing as owner, but not as user?
Regards,
Wiebe.

Hi Aandi,
Thanks for the help but I am able to change the title, authors name etc from the Postscript file so that prompted me to think that we may well be able to set passwords using the same. Any other source via which I can set password like ghostscript or some other open source , third party tool ?
Thanks for the help Dude ...

DataSource problems after BW upgrade

DataSource problems after BW upgrade
Upgrade from
SAP NetWeaver 2004s: SAP_BW 700 0012 SAPKW70012
to
SAP EHP 1 for SAP NetWeaver 7.0: SAP_BW 701 0007 SAPKW70107
BW system: PI_BASIS 7.01 SP 6
ECC/source system: PI_BASIS 2005_1_700 SP 11
Problem exists throughout, both with generic and standard DataSources.
Here is one specific example:
Generic DataSource ZXXXXXXXX
InfoPackage "ZXXXXXXXX(ZXXXXXXXX)" does not run. Error:
DataSource ZXXXXXXXX(SOURCESYS) must be activated
Message no. RSDS179
Then followed these steps:
1. Replicate Metadata from source system
2. Report RSDS_DATASOURCE_ACTIVATE_ALL from SE38 for source system SOURCESYS and DataSource ZXXXXXXXX
Errors returned:
Inconsistent user object ZXXXXXXXX SOURCESYS for PSA /BIC/B000XXXX
Error saving DataSource ZXXXXXXXX SOURCESYS
DataSource ZXXXXXXXX (SOURCESYS) could not be activated
When I try to choose "Manage" from the context menu for the DataSource, I see an error:
Invalid DataStore object name /BIC/B000XXXX: Reason: No valid entry in table RSTS
Message no. RSM1294
The following notes have not helped:
https://service.sap.com/sap/support/notes/1377274
https://service.sap.com/sap/support/notes/1383711
https://service.sap.com/sap/support/notes/1489064
https://service.sap.com/sap/support/notes/1056060
And no other SDN threads seem to give fruitful suggestions.
Any ideas?

Hi,
Just to help the folks out here.
In my case,
Inspite of going through several valid NOTES & program, my issue didnt resolve (you reply was pretty accurate - but dint help me :-)).
I have resolved the issue by adjusting the PSA table for the same.
Procedure:
Take the psa name --> go to table rstsods --> find the ODSNAME_TECH name for the relevant psa --> se38 t.code --> enter ODSNAME_TECH and click on 'adjust & activate database table' (make sure you have selected 'save data' radio button.
Just in case anyone who come across this problem, can do the above steps.
Regards,
Dubbu.

How do I remove the security password created after the upgrade?

How do I remove the security password created after the upgrade?

you mean passcode?
settings>general>passcode lock
and Turn passcode off

I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?

I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?

I was going to suggest - Settings>General>Reset>Reset all settings, but if you are restoring to factory settings, that should restore the settings back to factory defaults. But if you are restoring from a backup, after restoring to factory settings, try resetting all of the settings and see if that fixes it.
It might be something in your backup.

I have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

i have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

Check that your computer is compatible with Mountain Lion.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
MacBook Air (Late 2008 or newer) model number 2,1 or higher
Mac mini (Early 2009 or newer) model number 3,1 or higher
Mac Pro (Early 2008 or newer) model number 3,1 or higher
Xserve (Early 2009) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again. You can make a bootable DVD/USB stick to install using this free program.
Bootable Drive DVD or USB Flash Drive – Lion Diskmaker
Our 2 computers haven't experienced any significant problems, even though others have. I find it much better than 10.7 Lion, which I used for a week before reverting to 10.6.8
Mavericks is supposed to be released this fall, so you may want to wait.

T410i SSD user and master password problem after firmware upgrade

Similar Messages

Maybe you are looking for