T410s display port no longer works after lenovo / win7 upgrade

Arrggh... I have a Dell u2711h monitor that i connected to my t410s via display port. It worked fine until i did a lenovo driver updateand windows 7 update. Now, it just goes into powersaving mode with the display port. I backed out the windows7 updates, went back to a windows restore point from when i knew the dp worked, uinstalled / reinstalled the lenovo drivers for nvidia nvs 3100m optimus, audio, etc.
The HDMI cable works, the monitor works with display port off of another PC, but no longer on my t410s. Anybody have any ideas? I spent a lot of money getting a big monitor with a high resolution trhough dp, but now i can't use it. Very fustrating.
Any ideas?

Hi dft410s,
Please try in BIOS to isolate hardware/software issue. If problem remains, please contact local lenovo for machine inspection
Worldwide Support Center phone list for ThinkPad, ThinkCentre and ThinkStation systems
http://support.lenovo.com/en_US/detail.page?DocID=HT036550
Fred
T61 + X201i

Similar Messages

Ports no longer work after a blackout. How do I fix the problem?

After a black out my ports no longer work and nothing has helped. How do I get them working and can I fix it myself?
Thanks!

For DIY resources, check out the following:
iFixit
YouTube’s “How To” tutorials.

Some USB ports no longer working after installing Mountain Lion?

Some of my USB ports are no longer working after installing Mountain Lion onto my 21' 2011 iMac. I used to plug in my iphone 4S and charge it, or transfer files onto my iPad but none of the ports no longer work to do this. Funnily enough, other equipment plugged into the works. I have tried changing the cable. Any ideas?

In my experience, the USB ports on the back of an Apple monitor can be re-enabled simply by unplugging and plugging back in the device in question. You might also check to see that the USB Monitor hub shows up in System Profiler. My Apple monitor USB ports experienced no changes in moving to 10.4.7.
bd

HP OMEN Control Software No Longer Works After Windows 10 Upgrade

HP OMEN Control no longer works after the recent Windows 10 update. Profile switching, keyboard LED colors, zones, fn key options, etc. no longer respond at all. I've found references to this issue during Windows 10 beta testing. Is there a temporary workaround? Will there be a driver update to remedy this problem? Thanks.

I just purchased a new 2015 refurbished PC. It worked great with Windows 8.1. Upon installing Windows 10, The Omen control did not work as well as the fan. Really - hardware failure. Give us a break. So, I went back to Windows 8.1. Also this year, I purchased an Envy X2. This PC included a bluetooth keyboard that kept detatching. Again - REALLY, the keyboard doesn't work. That's a pretty important part of the PC. I searched the forum for answers and all I found was the same old line that HP was working on it. I found meesages over a year old that had this same problem. So, back it went to Best Buy. I used to really like HP computers, but now, I can't say that anymore. So, do I trust HP to fix this in a timely manner, NO. Why - because they had to know about this issue alrady for quite a while. And, they did not fix it. I really hope they prove me wrong.!! I will give them 1 more week to fix it. After that, the PC will be returned. And HP PCs will be off my scratched off my list, except maybe the HP Spectre X360. To my amazement, I am even considering a MacBook Pro. Funny thing - the Spectre X360 is supposed to be a great laptop, But, Microsoft was heavily involved in the design process. That is certainly not an HP confidence buider. HP - THIS IS YOUR TIME TO "STEP UP TO THE PLATE" and fix this mess. TImes like these are opportuniies to win over customers or loose customers to the competiion. I really want to keep this PC. It is by your response to this problem that will determine the outcome.

USB ports no longer working after 10.4.7 update

Hi, I ran the latest update (10.4.7) on my machine which is a G4 Quicksilver PowerPC. I have an Apple 17 inch flat screen display that has two USB ports attached. I had my keyboard plugged into one of the USB ports on my flat screen. After the update both USB ports on the flat panel no longer work! I can use the USB ports directly off the G4 itself and it works fine. Has anyone seen this issue? I guess I am stuck now until Apple decides to fix this?
Thanks,
Rob

In my experience, the USB ports on the back of an Apple monitor can be re-enabled simply by unplugging and plugging back in the device in question. You might also check to see that the USB Monitor hub shows up in System Profiler. My Apple monitor USB ports experienced no changes in moving to 10.4.7.
bd

Apple Cinema Display speakers no longer work after Mavericks update

I have a MacBook Pro 15", purchased in late-2010 connected to a 27" Apple Cinema Display also purchased at the same time. The display connects to the MacBook Pro via USB and mini displayport. The built-in 2.1 speakers on the display were working fine until the upgrade to Mavericks. When I go into the speakers settings, I can change it to internal speakers and the sound comes from the MacBook Pro, but when I choose the cinema display, nothing happens.
Any ideas?
Thanks in advance!

Hi lelandgray,
If you are having audio issues with your Cinema Display after upgrading your MacBook Pro to Mavericks, you may want to make sure that the most recent Cinema Display Firmware Update has been installed. You may find the following article helpful:
LED Cinema Display (27-inch): Intermittent loss of audio
http://support.apple.com/kb/ts3602
Regards,
- Brenden

Netboot no longer working after 10.6 upgrade

So I updated my 10.5.8 server to 10.6 recently, everything looks to be just dandy except that my netboot server no longer work.
I've used apple's trouble shooting guide and as well as bombich's, but still to no avail, I've checked the bootpd file, I even went as far as editing the nfs.conf file from macosxhints (link below)
http://hints.macworld.com/article.php?story=20100203124656707
below is a recent log:
Aug 30 16:06:41 120msod01 bootpd[1010]: server name 120msodxx.xxx.xxxx
Aug 30 16:06:41 120msod01 bootpd[1010]: interface en0: ip 10.5.0.57 mask 255.255.252.0
Aug 30 16:06:41 120msod01 bootpd[1010]: dhcp: re-reading lease list
Aug 30 16:06:41 120msod01 bootpd[1010]: bsdpd: re-reading configuration
Aug 30 16:06:41 120msod01 bootpd[1010]: bsdpd: shadow file size will be set to 48 megabytes
Aug 30 16:06:41 120msod01 bootpd[1010]: bsdpd: age time 00:15:00
Aug 30 16:06:41 120msod01 bootpd[1010]: service time 0.000012 seconds
Aug 30 16:06:41 120msod01 bootpd[1010]: service time 0.000002 seconds
Aug 30 16:09:16 120msod01 bootpd[1010]: service time 0.000028 seconds
Aug 30 16:09:16 120msod01 bootpd[1010]: service time 0.000007 seconds
Aug 30 16:11:08 120msod01 bootpd[1010]: service time 0.000009 seconds
Aug 30 16:11:08 120msod01 bootpd[1010]: service time 0.000002 seconds
Aug 30 16:11:08 120msod01 bootpd[1010]: service time 0.000014 seconds
Aug 30 16:11:08 120msod01 bootpd[1010]: service time 0.000007 seconds
Aug 30 16:11:39 120msod01 bootpd[1010]: service time 0.000019 seconds
Aug 30 16:11:39 120msod01 bootpd[1010]: service time 0.000008 seconds
Aug 30 16:11:58 120msod01 bootpd[1010]: BSDP DISCOVER [en0] 1,c4:2c:3:8:46:c6 NetBoot006 arch=i386 sysid=Macmini4,1
Aug 30 16:11:58 120msod01 bootpd[1010]: replyfile /private/tftpboot/NetBoot/NetBootSP0/SL_FullSuite.nbi/i386/booter
Aug 30 16:11:58 120msod01 bootpd[1010]: reply giaddr 10.5.12.3
Aug 30 16:11:58 120msod01 bootpd[1010]: BSDP OFFER sent [1,c4:2c:3:8:46:c6] pktsize 372
Aug 30 16:11:58 120msod01 bootpd[1010]: service time 0.000777 seconds
Aug 30 16:11:58 120msod01 bootpd[1010]: BSDP DISCOVER [en0] 1,c4:2c:3:8:46:c6 NetBoot006 arch=i386 sysid=Macmini4,1
Aug 30 16:11:58 120msod01 bootpd[1010]: replyfile /private/tftpboot/NetBoot/NetBootSP0/SL_FullSuite.nbi/i386/booter
Aug 30 16:11:58 120msod01 bootpd[1010]: reply giaddr 10.5.12.2
Aug 30 16:11:58 120msod01 bootpd[1010]: BSDP OFFER sent [1,c4:2c:3:8:46:c6] pktsize 372
Aug 30 16:11:58 120msod01 bootpd[1010]: service time 0.000399 seconds
Aug 30 16:11:59 120msod01 bootpd[1010]: service time 0.000018 seconds
Aug 30 16:11:59 120msod01 bootpd[1010]: service time 0.000007 seconds
I wasn't getting this far (/tftpboot line) until I turned on the firewall to allow port 69 traffic but it seems that the service hangs when the client machine is supposed recevie the payload of the diskimage.
I don't know how a perfect netboot service goes to $h*t after a clean install with no configuration changed. I've verfied that nothing with our dhcp service nor dns has been changed and also verified that the server name has been added to the ip_helper.
Any help is greatly apperciated.

My experiences with netboot on snow leopard server and a few other observations: Point 1 - Never have wireless on whether it be client or server when trying to netboot client. Point 2 - Must use standard mtu setting -1500- on server under prefs. ethernet advanced, doesn't seem to matter on client -I use 7936 for 600TL Readynas on clients only-. Point 3 - It seems that if you ever use wireless on the server it messes it up for good -Took about 8 installs to learn this the hard way-. Point 4 - It seems when logging into workgroup manager with default popup of machine name.local and default user name messes server up if you have a domain name, example of how it should be is: machine name.domain name.com, org, etc. Then username would be diradmin, then password ***** so that settings will hold if you go in to change anything. Many days were spent by a friend and myself learning these few things pertaining to my machine and may help others with weird problems on snow leopard server. If anyone here knows why this is, please post, although my machine is working properly, I am curious. Thank You. By the way, I am using all the latest updates except itunes 10.

EM dbconsole no longer works after RHEL 4 upgrade

I'd been running oracle 10.1.0.3.0 and the EM dbconsole on rhel 3 WS/x86_64. After upgrading to rhel 4 WS (with non-redhat kernel 2.6.13-rc6), the database runs fine but dbconsole doesn't work. 'emctl start dbconsole' takes a long time to run. Connections to port 5500 time out; both emagent and the java httpd process are running though they tend to die after 30 minutes or so.
I do see lines like this in emagent.trc
2005-08-24 10:50:13 Thread-491528 ERROR pingManager: nmepm_pingReposURL: Error in request response. code = 400. text =
2005-08-24 10:50:43 Thread-491528 ERROR pingManager: nmepm_pingReposURL: Error in request response. code = 400. text =
2005-08-24 10:50:43 Thread-589832 ERROR upload: Error in uploadXMLFiles. Trying again in 176.00 seconds.
2005-08-24 10:50:45 Thread-606216 ERROR upload: Error in uploadXMLFiles. Trying again in 211.00 seconds.
2005-08-24 10:51:10 Thread-622600 ERROR upload: Error in uploadXMLFiles. Trying again in 253.00 seconds.
Any suggestions?
Alex

Originally Posted by donasutton
I have begun pushing out ZCM 10.3 to my infrastructure and I'd like ask WHY the Remote Control Policy no longer works.
The managed device was unable to initialize Novell encryption scheme for the session. Ensure that the managed device is UTC time synchronized with this system. If the problem persists, contact Novell Technical Services
I had a clone with ZCM 10.2.2 which i upgraded to 10.3 and sent it back to my ZENimaging servers.
What is going on here?? Why does this not work?
Crippled help desk and p!ssed off Network Admin.
If the problem persists, contact Novell Technical Services :)
Thomas

Mail App no longer working after 2.0 upgrade

I upgraded to 2.0 on my IPhone Edge and now my mail application no longer works AT ALL. If I try to open it, it simply shows me a blank mail screen, waits for a few seconds and then returns to the home screen. Strangely enough, I have been able to send email photos using the camera application.
Email is the most important application for me on the iPhone! Has anyone encountered this problem? Is there a fix available?

I recently stopped by the apple store and have fixed my mail app! The problem as described to me was caused by a installing apps. Turns out that apps can mess with Mail setting in some way and perhaps due to a bad setting or a bad combination of settings my mail application stopped working. The way I fixed it was to do a restore to New Iphone which, unfortunately, wipes everything! But after syncing back up including re-installing all of my apps, mail works again! Of course, I lost all of my notes, various settings, and lots of other stuff. Turns out that a simple restore, since it backs up your phone beforehand (backing up bad settings at the same time) is not the silver bullet but a full restore to new iphone probably often is. Hope this helps others.

Keyboard, IR, Trackpad no longer work after 2.1 upgrade

Installed the BootCamp 2.1 upgrade and after the reboot, the keyboard, trackpad and IR receiver no longer work.
Windows recognizes the hardware (Found New Hardware) but during driver install, the dialog box pops up to say that Windows couldn't install the driver (Fatal error during installation).

I also just made the mistake of installing 2.1 and am having the same problems. The built-in keyboard and trackpad don't work, and my external keyboard doesn't work either. An external mouse works, but that's all.
***? Is it possible to downgrade to an earlier version?

Client proxies no longer work after R/3 upgrade to ECC5.0

Hi,
After the above upgrade where WAS of the R/3 systems went from 620 to 640 client side proxies no longer work.
To be able to use client proxies in 620 we had to use a plugin. But in 640 this should be native functionality, so no more plugin for this.
The error seems to lie in the connection from R/3 to XI. If I test the RFC connection that is defined in SXMB_ADM on R/3 I get the following error:
HTTPIO_PLG_ICM_CONNECT_FAILED-Fehlermeldung beim S
Message no. SR000
The IFR address is correctly defined.
The SPROX_CHECK_HTTP_COMMUNICATION test in sproxy-connection tests gives the following detailed info:
When calling the method
CL_HTTP_SERVER=>GET_EXTENSION_INFO
the exception
NO_HTTP_PING_SERVICE_FOUND
was triggered.
Does anyobe know how his can be solved?
Thanks
Tom

HI,
I think some problem with http destinations
Is your R3 system is configured as a Application system ?
Go to SXMB_ADM->Integration Engine Configuration->Check role of business system etc. and corresponding Integrtaion server
Check this guide page no-27
https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Regards,
Moorthy

DVR Search Option No Longer Works - After The Crap Upgrade

The new software upgrade is crap. DVR search option no longer works. I can't use the search option to find my favorite programs and set the DVR to record them. It only lets me put the first letter in the search field and then nothing. I can't enter any more letters aftet that.
Verizon sent me another DVR but it has same issues. They sent a technician to my house and he basically told me, the upgrade is crap and lots of people are having technical issues.
He gave me another box and said it is working. Now I have three DVRs sitting in my house and I have to return two. After he left I tried to search and I have the same exact issue so basically he just lied and didn't fix anything.
I called tech support over and over, and they just told me that they can't do anything. They basicaly admitted that the upgrade is crap and the are clueless on how to fix it. So I'm stock with 3 DVRs that don't work. Billing department told me they can't give me any discounts either.
Anyone else is having these issues?

Same issue here. Sent me another box, same model as the old one. Same exact issues. Called Tech support back, they admitted it was a known issue, and nothing he could do about it. Was told I had to talk to someone in SALES to get them to send me a newer box.
New box is here, and now i have no option to record. Oh, and last time I called tech support... I got 'disconnected' (after being on hold for 30+ minutes). They are really dropping the ball, and I will not be renewing.

Isight no longer works after snow leopard upgrade

my isight no longer is available directly after snow leopard upgrade on my macbook black. Anyone else with the same problem? The isight does not show up in 'about this mac' under USB and I tried resetting SMC and PRAM.

Hi,
In Leopard there was an App called iSight Update app that was in Hard Drive/System/Library/Core Services
This does not seem to be there in Snow Leopard.
An issue with some computers with the camera was that in System Preferences > Displays the Colours needed to be set to Millions.
Also check the Hard Drive/System/Library/Extensions folder and see that you have the Apple_iSight.kext (this is likely to handle the Internal iSights as well).
One last thing.
Some Web sites can make use of the camera using Flash.
If that tab is still open the Browser may have use of the camera.
It sounds like you have done computer restarts and this will not be the case unless the browser is set to go back to that page.
7:26 PM Sunday; August 30, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Remote Control No longer works after 10.3 upgrade

I have begun pushing out ZCM 10.3 to my infrastructure and I'd like ask WHY the Remote Control Policy no longer works.
The managed device was unable to initialize Novell encryption scheme for the session. Ensure that the managed device is UTC time synchronized with this system. If the problem persists, contact Novell Technical Services
I had a clone with ZCM 10.2.2 which i upgraded to 10.3 and sent it back to my ZENimaging servers.
What is going on here?? Why does this not work?
Crippled help desk and p!ssed off Network Admin.

Originally Posted by donasutton
I have begun pushing out ZCM 10.3 to my infrastructure and I'd like ask WHY the Remote Control Policy no longer works.
The managed device was unable to initialize Novell encryption scheme for the session. Ensure that the managed device is UTC time synchronized with this system. If the problem persists, contact Novell Technical Services
I had a clone with ZCM 10.2.2 which i upgraded to 10.3 and sent it back to my ZENimaging servers.
What is going on here?? Why does this not work?
Crippled help desk and p!ssed off Network Admin.
If the problem persists, contact Novell Technical Services :)
Thomas

Home button on iPad2 no longer works after iOS 7 upgrade

I upgraded my iPad2 to iOS 7 today. The home button no longer works. I've powered it down and back up as well as restarted it but it's still not working. Any suggestion greatly appreciated.
About to fly to China and was looking forward to watching movies and reading on the long flight.
Thanks!

Hi SUSOA!
Try using the steps in the following article to address this issue:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

T410s display port no longer works after lenovo / win7 upgrade

Similar Messages

Maybe you are looking for