T410s Fingerprint power-on option doesn't work

I have selected "Use fingerprint scan instead of power-on button", so when I scan my finger I shall be able to turn on my computer and login to windows.. and it worked well until I had a replacement of the plastic panel where fingerprint reader is located.
Eversince then, green light is not on unless I was asked to login to something, (v.s. the gree light will be constantly on even if power-off). I still can scan fingerprint and log onto everything if asked though.
I tried to reinstall the newest driver and made sure the "Use fingerprint scan instead of power-on button" is checked, but still no luck. Can someone pls help? Thanks.

I have a similar problem. Only after palmrest replacement, the fingerprint reader is useless, I cannot log on to windows using the stored fingerprints from before the palmrest replacement or record new ones. I deleted all saved fingerprints, reset fingerprint data in software and BIOS, re-installed latest fingerprint software - no effect. The green LED is on, when I try to record a new fingerprints, then there is some time delay on the red LED blinks and message on the screen tells me that the quality of this scan was not sufficient. After many trials I gave up. The reader reacts quite slowly turning from green to red - maybe a driver issue? Otherwise I´ll need to get service again..This sucks (see below :-(
This was my third palm rest replacement (first a crack next to the touchpad, replaced two times against a palmrest with dysfunctional touchpad) and now a dysfunctional fingerprint reader. I know, this is not a critical part of the laptop, but I am deeply disappointed choosing a Lenovo machine. ThinkPads had such a good reputation and they are (at least in Europe) very expensive.

Similar Messages

How do i copy content from one hard rive to another through my macbook air? the copy and paste option doesn't work

How do i copy content from one hard rive to another through my macbook air? the copy and paste option doesn't work

It's because of the extension of the hard drive is a Windows extension ( most likely MSDOS or Ex-FAT), meaning you can only read but not write. If there are no important files (or you can copy the whole thing to your computer/mac) you can just reformat the hard drive and change the extension to NTFS (readable and writable on both windows and mac) or Mac OS Extended (readable and writable on Mac, readable on windows).
Go to DISK UTILITY
Choose the Hard Disk you intended
ERASE
You can choose either
(I personally prefer this one, you know just in case)

Create a PDF from webpage using entire site option doesn't works

OK, guys, this is the problem...
After YEARS of testing from Acrpbat 4 thru 9 on Create a PDF from webpage using entire site option... it doesn't works properly and doesn't got the entire site. ALWAYS get an error of memory or any other error but FINALLY you NEVER got the entire site. I'm talking for a big website... not like amazon.com, but a big one.
I make a walkarround to try to capture the website in parts but Acrobat is not "intelligent" to make a resume capture of the site, because ALWAYS start from the begining instead from the resume position of the site...
My question is, HOW can get the ENTIRE SITE in a PDF document... without getting errors or stopping the capture process...
Don't have problem of low RAM memory because I'm in a MONSTER MACINTOSH.... 3.2 GHZ with 8 Core and 32 GB of RAM under Mac OS X Leopard 10.5.6 in Acrobat 9 Pro.
If I'm not wrong, the GET ENTIRE SITE option in Web Capture (Create a PDF from webpage using entire site option) doesn't works from Acrobat 4 thru 9 in Pro version... tested, you'll never got the entire site... I'm talking in capture a huge entire site and not a little one...
Can someone help me?
Thanks.

Ok so I go to a web page and select something to print. Once I've clicked print I switch over from printer/micosoft xps docu writer/fax and select Adobe PDF. All goes through with a 'Create Adobe PDF' coming up progressing through to eventually save and store. Once I open the file it end up as the picture above. I have the same version on another computer and that works fine but this particular Sony laptop it doesn't seem to work properly.

Music App shuffle option doesn't work

Stats: iPad 1, iOS 5.0.1
Music App shuffle option doesn't work. I have already reset the iPad, removed all my music and resynched. Shuffle button is selectable, but just plays the songs in alphabetical order, even if I try to skip to another song or start anywhere on my playlist.
So far this version of music player for apple product is disappointing, the iTunes app before never had these issues. There are some serious bugs in this Music app, Apple your comback success was largely because of iPods and iTunes, so music is a big part of Apple users use, please fix this.

Hello,
Yes I believe this is a known bug in Firefox OS v1.0. [https://bugzilla.mozilla.org/show_bug.cgi?id=883781 Bug 883781].
The bug is marked as resolved in Firefox OS v1.1. Once ZTE update the Open to v1.1 the bug will be fixed on your device.
v1.1 of Firefox OS was officially released yesterday. Hopefully it won't be too long before it reaches the ZTE Open. See here for more details:
[https://blog.mozilla.org/futurereleases/2013/10/09/firefox-os-update-1-1-adds-new-features-performance-improvements-and-additional-language-support/ Firefox OS Update (1.1)]
I hope that helps.

Prompt option doesn't work

Hi
I have a 8703e and the DELETE ON: Prompt option doesn't work.
It show me only "delete/cancel" with out the option to choise from where i want to do that
I have only one account email from a Lotus Notes Server 8
Any recommendation? thank you so much for read me
Solved!
Go to Solution.

HI and thank you for your email.. yes we are using a blackberry enterprise server ... but anyway
I was trying a lot of differents methods without success. Finally I found a solution.
This is the recets:
1) Create a backup from the desktop software at desk's client
2) Wipe the blackberry device
3) Re-install the account in the blackberry device
4) Restore the backup from the desktop software.. but PreAttetion here!! in Advance way... one by one the differents option from the checklist... because When I was trying to do a complete restore (all in the same time) the problem were the same
I don't know if there is another best solution.. but in this case It was fine.
Eduardo A. Pinetti

My mouse fell now the scroll/zoom option doesn't work. Any tips?

My mouse fell from the couch to a carpeted floor. Now the scroll/zoom option doesn't work. Any tips? It landed and rolled a bit.

Hello:
I suggest you buy a new one.
Barry

Capitalization doesn't work as described. One can start with lower case and change to upper, but changing from upper case to any of the other options doesn't work. Is there a way around this or is this just a glitch that needs fixing?

In Pages capitalization doesn't work as described. One can start with lower case and change to upper, but changing from upper case to any of the other options doesn't work. Is there a way around this or is this just a glitch that needs fixing?

I think it does work as described, but the description is not very complete. Capitalization does not change any of the characters that you type; what it does is allow some of the lower case characters to display as capitals. If you copy the result and paste it as plain text, you'll see that the lower case characters are still there. It doesn't actually say anywhere that it can make capitals display as lower case, and it can't.
The obvious way around this is to actually type what you want.
The more powerful way is to install WordService from Devon Technologies which adds the functionality of Pages' capitalization menu as well a lot of other ones. WordService actually changes the character to the one displayed, and it works in most of the applications on your Mac.

The privacy option doesn't work in 5.0: There's no notification given when multiple tabs are closed.

The privacy option in 5.0 doesn't work.
When exiting Firefox with multiple tabs open, no notification is given...
How can I go back to Firefox 4?
I had the google toolbar when I had firefox 4... I upgraded to 5.0 and it still works... My friend tried to load it and it doesn't work.

''The privacy option in 5.0 doesn't work.''
Do you mean that Privacy options can't be accessed in the Options dialog, or Private Browsing doesn't work??
Could you test with a new profile to see whether the update might have caused a settings problem, or you have an incompatible add-on?
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, close Firefox and fire up the Profile Manager to create a new profile: [https://support.mozilla.com/kb/Managing+profiles Managing profiles].
If that work, you can migrate your bookmarks, saved passwords, and other key settings to the new profile, see: [https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile].
Hope this helps.

MP3 encoder VBR Options doesn't work anymore

Hi everyone !
I always used iTunes mp3 encoder to rip my CD's with the VBR option ON and it worked fine until now.
Indeed since 10.3 the VBR option doesn't seem to be working no more : the output is a CBR mp3 file either I tick or not the VBR option box !
Does anyone have the same problem ? Is there a way to solve this issue ?
Thank you

We can't know. You have not provided any system info or other useful technical details.
Mylenium

How can you turn off the spell checker in Firefox? (The menu option doesn't work.)

There was a solution to this I came across a long time ago, but I don't remember what it was. I want to turn off my spell checker in Firefox. The usual instructions given for doing this are to go into Options->Advanced and de-select "Check my spelling as I type". This doesn't work. Period. And this is a bug that has been around for a long time in Firefox.
What's a way to disable this? I don't like seeing a bunch of red lines under correctly spelled words that just happen to not be in Firefox's default dictionary, and I don't want to have to add things to my dictionary either.

Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)

Save link as option doesn't work as expected anymore

When I formerly right clicked a link to a file (to download) and chose the option '''Save link as''', I was able to save the file to the location I specified.
At the moment this doesn't work anymore. When I click the same link as before and choose save link as, firefox wants to save the .htm page instead of the .csv file.

You can try "Reset Download Actions": http://kb.mozillazine.org/File_types_and_download_actions

The thunderbolt outputs on my new power mac pro doesn't work

Ttrying to use a new 3tb thunderbolt external HD and my Power Mac Pro doesn't see the drive but it works fine on my Mac Mini.
Have had this computer less than 4 weeks.
Any help?
Tom

The current Mac Pro does not have Thunderbolt ports, it has Mini DisplayPorts that are physically identical to Thunderbolt but only pass video signals. The Mac Pro that is coming out in December (small black cylinder) will have Thunderbolt.

Layout option doesn't work in Easy Print VI panel, controls on tabs don't appear

Found two problems with the Report Generation VIs:
1) In the (Report Generation) Easy Print VI Panel or Documentation.vi, the Layout options don't work (dug down into the sub-VI's and found that they are not connected to anything).
2) If you have controls or indicators on a Tab Control, and try to use the Easy Print VI Panel or Documentation.vi with the option to include controls in the report, they don't appear. The only controls/indicators that do appear are the ones that are displayed on all of the tabs (ie, create an control and move it on top of the tab control so that it appears on every page). There is a sub-VI (Expand_control_ref_with_nested_controls.vi) that is called to handle nested controls (ie, clusters, arrays,etc...) but it should have a case to handle tab controls.
Solved!
Go to Solution.

Hey Sajosie,
Digging into the Sub-VI's you are correct in saying that the Layout Options user input is not connected to anything for most cases. However, In the default case of "Quick Print" the Layout Options are used to modify the layout of the report. In the help for this VI, it mentions that this input is ignored for "Standard Reports" and "HTML" report options. However, it does not mention that this ignoring of the Layout Options is expected for "Word" or "Excel" reports.
In terms of including controls and indicators in the report that appear on tab controls, I can make a product suggestion to make this sort of front panel design more compatible with the Easy Print VI Panel or Documentation.
Hope this helps.
-Ben
WaterlooLabs

Standard Text with ' include' option doesn't work with order created by FM

Hi ABAPers,
Standard text with 'Include' Option does not work with all the Order created via the Function Module SD_ORDER_CREATE_WWW. Where as Order created via VA01 display the Standard text with 'Include'.
On my analysis I found that, Order created via FM use the '*' 'Comment' instead of ':/' 'Command' in the script editor. So the Standard text inserted was considered as a Text instead of command.
Hence issuing print or print preview, the Script display the INCLUDE statement instead of the text.
Can you please let me know the reason and the way to rectify it.
Thanks & Regards
N.Suresh Kumar

Hi.
Make that * command as /: and try in ur program..
It works..
Hope it helps...
Cheers,
Simha.

IPhone 5 power button sometimes doesn't work under iOS 7

Hi, my wife has noticed the problem which started to appear on her iPhone 5 after she has recently upgraded to IOS 7.0.2
Power button randomly doesn't respond to power off the phone but never to power it on. Does anyone has similar issue?

The issue could be a faulty power button. There's nothing, that I'm aware of, in iOS 7 that would cause inconsistent power button functionality.
Make sure you depress/hold the power button long enough to see the RED power off slider.

T410s Fingerprint power-on option doesn't work

Similar Messages

Maybe you are looking for