T410s Intel HD Graphics Issue

I am having a weird issue with our new T410s laptops. I install the Graphics Driver that is on the website and it shows that everything is working fine.
If I place it in a series 3 dock with now monitors is works fine. If I try to plug in 1 Lenovo L2251p Monitor via DisplayPort it works fine, it will clone, it will do extended.
However, if I try to plug in 2 L2251p monitors via DisplayPort all 3 monitors go blank! No matter what I do I cannot get it to work. I can do Built in and Monitor 1 fine. I can do Built in and Monitor 2 fine but I cannot do Monitor 1 and monitor 2.
I have tried the drivers from the website, I have tried the ones from Windows updates, neither one works.
I also get an error every so often when doing extended:
"Display Driver igfx stopped responding and has successfully recovered"

there is a problem with the current Lenovo firmware that for some reason dual DP output is not supported, for the time been you have use the DVI out for the second monitor. Lenovo technician and engineers have already caught on this issue, they are working on a resolution.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

  • Intel (HD) graphics issue when trying to use "Stellarium" on Satellite C660

    Stellarium (a free application for astronomie) works w/o any problem on many computers of my astronomie club but impossible to use it on my Toshiba Satellite C660-226. No problem during installation but nothing appends when I launch the program.
    I run it in compatibility mode (windows XP Sp2) and Intel HD graphics driver is at level 8.15.10.2189 as recommended on Toshiba support center.
    If I install a lower level of this driver( VGA std graphic carte at level 6.1.7600.16385) ,Stellarium works but very slowly and some functions (like zoom) are bugging.
    Stellarium support center recommands to install a more recent level of intel HD graphics driver but I don't find a more recent level working with P6100 processor on Intel download site.
    Can you help me?
    Regards

    Hi some news about Intel driver install on my Toshiba Satellite C660-226
    I've succeded to install Intel HD graphics driver level 8.15.10.2509 and now Stellarium works fine.
    Hereunder the method I've applied :
    First I've installed an old driver level found on my labtop ( VGA graphics card std level 6.1.7600.16385)
    then Uninstalled Stellarium if already installed.
    I've download Win7Vista_64_152250.exe from the Intel download center (Pentium P6100 for my computer)
    On exec line : I typed the following command : bcedeit /set nointegritychecks ON
    After these steps, I executed the downloaded file "Win7Vista_64_152250.exe" from my download directory.
    When installation is finished , I reboot my labtop and checked Intel HD graphics driver.
    Driver level now : 8.15.10.2509 (not 2189 as last Toshiba recommanded level).
    On exec line : I typed the following command : bcedeit /set nointegritychecks OFF
    Stellarium 0.10.6 is reinstalled and works w/o error now. Up to now I don't more recent level.......
    Try this if you're still on this problem ...........good luck :o)

  • T410, Intel HD Graphics and Windows Server 2008

    Hi All
    When I run my video drivers with the standard VGA it works fine but I can't use my analog VGA port to a projector or external monitor without changing the BOS settings.  If I install the Windows 7/Vista video drivers for the Intel HD Graphics, it appears to install ok, then, when I reboot, it starts to flash (it appears to be going through various modes) and then eventually comes up with a BSOD.  I have tried the latest version and a previous version of the same driver.
    Any ideas?
    Thanks
    A

    Windows 7 drivers should work, but the applications asociated with the drivers (a.k.a "panel control") won't work.
    Officialy, Windows Server 2008 isn't supported by Lenovo. You can try to enter to Intel's site and checke there if they had published a working driver for your operative system.
    Best regards.
    IPnaSh
    First Spanish Community Guru - Colaborador ad honorem

  • Intel HD Graphics issue fix

    Just wanted to give an update  an issue.
    My Mboard is a MSI H81 P33 Running  2x2gb 1300 corsair ram and a Intel celeron G1820 on windows 8.1 64
    The build was fine no issue installed all updates from Microsoft and the msi live update software. I then started to notice that Google Chrome was slow laggy and very unresponsive. So i switched for a moment to internet explorer no issue. So i tried to drill down the issue in chrome. A lot of user's pointed out that in chrome if you switch of hardware acceleration the issue was resolved.
    YES....BUT this did solve the issue but now certain things like youtube were not as responsive and the fish bowl test was slow. So i switched hardware acceleration back on. Chrome went back to its old ways long to load slow page opens etc.
    As a last resort i went to the intel driver update page and used the auto scan my sytem feature. It found my diplay driver for the igpu to be out of date installed the new version and BOOM THE ISSUE WITH CHROME WAS SOLVED.
    SO WHY IS THE MSI UPDATE GIVING ME AN OUT OF DATE DRIVER if you search slow chrome lots of people have this issue who is at fault moard driver man intel windows chrome. The whole situation now makes me dubious about msi's ability to offer the correct driver's as it still shows 10.18.10.3650 for the vga driver yet intel latest is 10.18.10.3958

    http://www.intel.com/p/en_US/support/detect <---- use that link and let it auto detect your graphics core on the CPU and update the driver!

  • Graphics issue on Intel 915GM

    Hi,
    my graphics driver doesn't seem to be working properly as glxgears runs with only half my vsynch rate.
    I am running Arch on an IBM Thinkpad X41T, and use the xf86-video-intel driver. I enabled early kms via "i915" in the Modules array of mkinitcpio.conf, but the issue remains weather or not I remove it (I did run mkinitcpio -p linux after changing the file). My Xorg.0.log does not have any (EE) entries, except for "unable to load module 'vesa'". I did uninstall vesa after reading that it might cause graphics issues if one has proper graphics drivers installed.
    What I realized is that my Display controller does not seem to have a driver installed. lspci -k returns
    $ lspci -k
    00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
    Subsystem: IBM ThinkPad Z60t
    Kernel driver in use: agpgart-intel
    00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
    Subsystem: IBM Device 0582
    Kernel driver in use: i915
    00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
    Subsystem: IBM Device 0582
    00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
    Kernel driver in use: pcieport
    00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
    Subsystem: IBM Device 0565
    Kernel driver in use: uhci_hcd
    00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
    Subsystem: IBM Device 0565
    Kernel driver in use: uhci_hcd
    00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
    Subsystem: IBM Device 0565
    Kernel driver in use: uhci_hcd
    00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
    Subsystem: IBM Device 0565
    Kernel driver in use: uhci_hcd
    00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
    Subsystem: IBM Device 0566
    Kernel driver in use: ehci_hcd
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
    00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
    Subsystem: IBM Device 0581
    Kernel driver in use: snd_intel8x0
    00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
    Subsystem: IBM Device 0574
    Kernel driver in use: snd_intel8x0m
    00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
    Subsystem: IBM Device 0568
    Kernel driver in use: lpc_ich
    00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
    Subsystem: IBM Device 056a
    Kernel driver in use: ata_piix
    00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
    Subsystem: IBM Device 056b
    Kernel driver in use: i801_smbus
    02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 11)
    Subsystem: IBM ThinkPad Z60t
    Kernel driver in use: tg3
    04:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8d)
    Subsystem: IBM Device 0555
    Kernel driver in use: yenta_cardbus
    04:00.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 13)
    Subsystem: IBM ThinkPad X60s / Z60t
    Kernel driver in use: sdhci-pci
    04:02.0 Ethernet controller: Atheros Communications Inc. AR5212 802.11abg NIC (rev 01)
    Subsystem: IBM Device 057e
    Kernel driver in use: ath5k
    Is the Display controller the problem here? What drivers do I need, if any?
    I'm thankful for any helpful comments!
    Cheers!
    Neuneck

    Hi
    have you try the    "AccelMethod"  "uxa" in  /etc/X11/xorg.conf.d/20-intel.conf
    https://wiki.archlinux.org/index.php/In … and_tricks

  • Satellite C660 - Intel HD Graphics update issue

    Hello,
    sorry for my English level, I'm French
    I have an issue without solution with my Satellite C660 (for the moment i hope!) I downloaded the software google sketchup 8, dedicated to the architecture drawing, but it doesnt work, I always have a bug message informing that it is necessary to update de drivers of the graphic card (According to google support it seems that OPENGL functions should be implemented in the drivers of my laptop)
    So I have downloaded the last available drivers for the configuration I have ( Intel HD graphics for pentium, windows 7 64 bits) ;
    the link ( french website, the one for Intel is not currently available, it is an .exe document)
    http://www.touslesdrivers.com/php/constructeurs/telechargement.php?v_code=37057&v_langue=fr
    I have tried to manually update de graphic card driver with the device manager menu (graphics card > update the drivers button> manual file.exe selection ), but at the end there is no update, I only have a very quick message informing that windows has determinated that the drivers are already updated.
    Actually there is no changes on the drivers (still the same date of the pilotes 28/07/2010 in the graphics card properties) and sketchup is still out of work
    Any suggestions?
    Thanks in advance

    Hello
    Thank you for the reply, the type of the laptop is the C660 2RG with windows 7.
    Regarding the Intel HD graphics I've tried to download it directly in Intel website but the appropriate file (name Intel HD graphics for Intel Pentium and Celeron Processors with Intel HD Graphics) is not available, when you click on itn you have a displayed screen which propose to scan you laptop in order to determinate your needs
    But even with this function you have at the end a message telling that the configuration is specifically done by the laptop builder and no action could be taken.
    To run the application Sketchup i need, the driver must support the OpenGL components (usually available in the graphics cards driver, but it seems that Toshiba configuation has been done without it)
    Thanks

  • Does anyone else have display issues with Intel X3100 graphics and OS X Lion?

    I took the screenshot below to demonstrate one issue I have had with graphics since upgrading to OS X Lion. I use a Late 2007 MacBook with 2.0GHz Core 2 Duo and the Intel X3100 graphics chipset. I have 4GB RAM. Had to reboot to get this to correct itself. The problem is the menubar (obvious) and the desktop image is missing, replaced by the grey.
    I have an external monitor connected (second image) and everything displays properly there.
    Some other issues I've noticed are using Mission Control sometimes yields unpredictable results, graphically speaking, and the fullscreen apps don't always allow me to see the menubar. These all seem graphically related. Is this a hardware or software problem? Any solutions?

    Here is another display issue with my machine...perhaps software rather than hardware? The icon for the rtf file "Matt Passages" is missing entirely. There is a faint rectangle present instead. The same file has an icon in the first image posted above. No change to the file since then. And two other RTFs have the icon! Odd things with Lion.

  • H67MS-E43 Intel HD Graphics Driver Issue

    I recently purchased a H67MS-E43(B3) with a Core i3 3.4Ghz SandyBridge and 4GB or Corsair RAM.  I installed Windows 7 Ultimate and the latest drivers for all the missing devices from either the MSI site or the Intel site.  The problem is that no matter what driver I install for the Intel HD Graphics (MSI, Intel, and Windows Update) as soon as I reboot tons of Windows services crash and it constantly logs page faults in the system log.  MMC stops working and explorer constantly crashes.  If you remove the driver and let it run with just a standard VGA driver it is ok.  Any advice?

    Nothing?  I guess I'll just return it and get a quality board from Intel.

  • Unable to update Intel HD graphics drivers on my new computer

    Hi,
    I just recently bought a desktop HP Pavilion PC with Windows 8 64-bit which includes an Intel HD Graphics card but when I try to download the latest driver for my graphics (version 15.33.18.64.3496) on Intel's site it says I need to download it from PC manufacturer.
    When I search for this update either on HPs site or using HP Support Assistant, it is not appearing so I cannot download it. This is causing me to run games in 'fair' graphics to lower the framerate and the games all say i need to update my video card.
    Please help, growing frustrated!!
    P.S. i've now upgraded to Windows 8.1 but still not resolved the issue.
    Thanks,
    Admurphy85

    Thank you for the additional information.
    I normally recommend a PSU with at least 500W.  However, 600W is better for future upgrades.  Here is a Corsair PSU that will do a good job.  Corsair makes enthusiast quality products for a good price.  It is best to measure the existing PSU to assure that the new one will fit.
    As for video cards, I like XFX, EVGA, Sapphire and PNY in that order.  I came to these preferences from being on many enthusiast/gamer forums over the years.  You should pick a video card and get the measurements.  Then, make a template the same size and to see if it will fit into the space provided.  You should add at least one inch if the card has extra power connector/s.  Normally, a card in the range of 9" to 9.5" will work fine.  Newegg is a good place to shop for cards.  Their specifications are more complete than other etailers.  It would be good if you find a card.  Post a link and I will review it for you.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • AMD 5650/Intel switchable graphics setup configuration woes

    I was wondering if someone could help me with my POS HP DV7-4100 ATI Radeon 5650/Intel switchable graphics setup.  I'm so annoyed with this and don't know how to proceed but it looks like I'm not completing the configuration properly.
    I have tried seemingly everything so far: 
    Catalyst w/ Catalyst-utils
    Catalyst-hook
    Catalyst w & w/out utils-pxp
    Catalyst-total-pxp
    Anyway, loading catalyst without xorg.conf seems to get me the closest to a working setup but once I log into Cinnamon, I get a message saying that it has loaded in fallback mode and if I would like to try to restart cinnamon (nothing happens).
    This leads me to believe that this is a config issue.
    This is the dmesg without an xorg.conf file.
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 ro quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000025bffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.6 present.
    [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x25c000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-combining
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 2 base 080000000 mask FE0000000 write-back
    [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 09B800000 mask FFF800000 uncachable
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask F80000000 write-back
    [ 0.000000] 7 base 25C000000 mask FFC000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b800 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25be00000-0x25bffffff]
    [ 0.000000] [mem 0x25be00000-0x25bffffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x258000000-0x25bdfffff]
    [ 0.000000] [mem 0x258000000-0x25bdfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x257ffffff]
    [ 0.000000] [mem 0x200000000-0x257ffffff] page 2M
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9b63efff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x9b5fffff] page 2M
    [ 0.000000] [mem 0x9b600000-0x9b63efff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9b7ff000-0x9b7fffff]
    [ 0.000000] [mem 0x9b7ff000-0x9b7fffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
    [ 0.000000] [mem 0x100000000-0x1fbffffff] page 2M
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x37a28000-0x37d0bfff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 000000009b7fe120 0007C (v01 HPQOEM SLIC-MPC 00000001 01000013)
    [ 0.000000] ACPI: FACP 000000009b7fc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 000000009b7e9000 0F50F (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: FACS 000000009b75e000 00040
    [ 0.000000] ACPI: ASF! 000000009b7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: HPET 000000009b7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: APIC 000000009b7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 000000009b7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 SLIC 000F4240)
    [ 0.000000] ACPI: BOOT 000000009b7e5000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: ASPT 000000009b7e2000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: WDAT 000000009b7e1000 00224 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000009b7e0000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 000000009b7de000 01B34 (v01 AmdRef AmdTabl 00001000 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025bffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25bffffff]
    [ 0.000000] NODE_DATA [mem 0x25bff5000-0x25bff9fff]
    [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880253600000-ffff88025b5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x25bffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x9b63efff]
    [ 0.000000] node 0: [mem 0x9b7ff000-0x9b7fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x1fbffffff]
    [ 0.000000] node 0: [mem 0x200000000-0x25bffffff]
    [ 0.000000] On node 0 totalpages: 2045404
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9881 pages used for memmap
    [ 0.000000] DMA32 zone: 632384 pages, LIFO batch:31
    [ 0.000000] Normal zone: 22272 pages used for memmap
    [ 0.000000] Normal zone: 1409024 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b63f000-0x9b6befff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b6bf000-0x9b7befff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b7bf000-0x9b7fefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b800000-0x9fffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffe7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffe80000-0xffffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
    [ 0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025bc00000 s86464 r8192 d24128 u262144
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2013166
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7968736K/8181616K available (5124K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 212880K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2527.100 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.79 BogoMIPS (lpj=8423666)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000033] Security Framework initialized
    [ 0.000044] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000045] Yama: becoming mindful.
    [ 0.000537] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.002402] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.003219] Mount-cache hash table entries: 256
    [ 0.003418] Initializing cgroup subsys memory
    [ 0.003430] Initializing cgroup subsys devices
    [ 0.003432] Initializing cgroup subsys freezer
    [ 0.003434] Initializing cgroup subsys net_cls
    [ 0.003435] Initializing cgroup subsys blkio
    [ 0.003456] CPU: Physical Processor ID: 0
    [ 0.003457] CPU: Processor Core ID: 0
    [ 0.003463] mce: CPU supports 9 MCE banks
    [ 0.003473] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003483] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 6
    [ 0.003568] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.004537] ACPI: Core revision 20130725
    [ 0.013846] ACPI: All ACPI Tables successfully acquired
    [ 0.038849] ftrace: allocating 20318 entries in 80 pages
    [ 0.048808] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.081797] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz (fam: 06, model: 25, stepping: 05)
    [ 0.187276] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
    [ 0.187283] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
    [ 0.187285] ... version: 3
    [ 0.187286] ... bit width: 48
    [ 0.187287] ... generic registers: 4
    [ 0.187288] ... value mask: 0000ffffffffffff
    [ 0.187288] ... max period: 000000007fffffff
    [ 0.187289] ... fixed-purpose events: 3
    [ 0.187290] ... event mask: 000000070000000f
    [ 0.660504] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.647139] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
    [ 0.700394] Brought up 4 CPUs
    [ 0.700400] smpboot: Total of 4 processors activated (20224.16 BogoMIPS)
    [ 0.702976] devtmpfs: initialized
    [ 0.705408] PM: Registering ACPI NVS region [mem 0x9b6bf000-0x9b7befff] (1048576 bytes)
    [ 0.706249] RTC time: 18:58:44, date: 01/06/14
    [ 0.706292] NET: Registered protocol family 16
    [ 0.706388] cpuidle: using governor ladder
    [ 0.706389] cpuidle: using governor menu
    [ 0.706414] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.706416] ACPI: bus type PCI registered
    [ 0.706418] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.706482] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
    [ 0.706485] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
    [ 0.713484] PCI: Using configuration type 1 for base access
    [ 0.714057] bio: create slab <bio-0> at 0
    [ 0.714171] ACPI: Added _OSI(Module Device)
    [ 0.714172] ACPI: Added _OSI(Processor Device)
    [ 0.714174] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.714175] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.715777] ACPI: EC: Look up EC in DSDT
    [ 0.723731] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.729362] ACPI: SSDT 000000009b691918 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.729739] ACPI: Dynamic OEM Table Load:
    [ 0.729741] ACPI: SSDT (null) 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.729882] ACPI: SSDT 000000009b68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.730243] ACPI: Dynamic OEM Table Load:
    [ 0.730245] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.750624] ACPI: SSDT 000000009b690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.751035] ACPI: Dynamic OEM Table Load:
    [ 0.751037] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.760515] ACPI: SSDT 000000009b68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.760902] ACPI: Dynamic OEM Table Load:
    [ 0.760904] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.813748] ACPI: Interpreter enabled
    [ 0.813763] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 0.813769] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.813788] ACPI: (supports S0 S3 S4 S5)
    [ 0.813790] ACPI: Using IOAPIC for interrupt routing
    [ 0.813825] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.813932] ACPI: No dock devices found.
    [ 1.447844] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
    [ 1.447876] \_SB_.PCI0:_OSC invalid UUID
    [ 1.447877] _OSC request data:1 8 0
    [ 1.447907] \_SB_.PCI0:_OSC invalid UUID
    [ 1.447908] _OSC request data:1 1f 0
    [ 1.447911] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 1.447913] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 1.448565] ACPI: \_SB_.PCI0.ACEL: can't evaluate _ADR (0x5)
    [ 1.448567] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
    [ 1.448573] PCI host bridge to bus 0000:00
    [ 1.448575] pci_bus 0000:00: root bus resource [bus 00-7e]
    [ 1.448577] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.448578] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.448580] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.448581] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff]
    [ 1.448589] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
    [ 1.448606] DMAR: Disabling batched IOTLB flush on Ironlake
    [ 1.448669] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
    [ 1.448699] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.448735] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 1.448767] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
    [ 1.448778] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
    [ 1.448783] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 1.448787] pci 0000:00:02.0: reg 0x20: [io 0x5050-0x5057]
    [ 1.448892] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
    [ 1.448920] pci 0000:00:16.0: reg 0x10: [mem 0xc4504000-0xc450400f 64bit]
    [ 1.449016] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.449101] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
    [ 1.449515] pci 0000:00:1a.0: reg 0x10: [mem 0xc450a000-0xc450a3ff]
    [ 1.451973] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.452031] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 1.452072] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
    [ 1.452093] pci 0000:00:1b.0: reg 0x10: [mem 0xc4500000-0xc4503fff 64bit]
    [ 1.452188] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.452234] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 1.452267] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
    [ 1.452365] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.452412] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.452444] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
    [ 1.452541] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.452588] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 1.452634] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
    [ 1.453043] pci 0000:00:1d.0: reg 0x10: [mem 0xc4509000-0xc45093ff]
    [ 1.455490] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.455548] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1.455583] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 1.455686] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 1.455720] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
    [ 1.455888] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
    [ 1.455915] pci 0000:00:1f.2: reg 0x10: [io 0x5048-0x504f]
    [ 1.455926] pci 0000:00:1f.2: reg 0x14: [io 0x505c-0x505f]
    [ 1.455937] pci 0000:00:1f.2: reg 0x18: [io 0x5040-0x5047]
    [ 1.455947] pci 0000:00:1f.2: reg 0x1c: [io 0x5058-0x505b]
    [ 1.455958] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
    [ 1.455969] pci 0000:00:1f.2: reg 0x24: [mem 0xc4508000-0xc45087ff]
    [ 1.456035] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.456106] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
    [ 1.456126] pci 0000:00:1f.3: reg 0x10: [mem 0xc4506000-0xc45060ff 64bit]
    [ 1.456155] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
    [ 1.456246] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
    [ 1.456272] pci 0000:00:1f.6: reg 0x10: [mem 0xc4507000-0xc4507fff 64bit]
    [ 1.456465] pci 0000:01:00.0: [1002:68c1] type 00 class 0x030000
    [ 1.456479] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.456489] pci 0000:01:00.0: reg 0x18: [mem 0xc4400000-0xc441ffff 64bit]
    [ 1.456496] pci 0000:01:00.0: reg 0x20: [io 0x4000-0x40ff]
    [ 1.456507] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
    [ 1.456544] pci 0000:01:00.0: supports D1 D2
    [ 1.456587] pci 0000:01:00.1: [1002:aa60] type 00 class 0x040300
    [ 1.456603] pci 0000:01:00.1: reg 0x10: [mem 0xc4420000-0xc4423fff 64bit]
    [ 1.456673] pci 0000:01:00.1: supports D1 D2
    [ 1.456730] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.456732] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.456735] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
    [ 1.456738] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.456862] pci 0000:02:00.0: [8086:0084] type 00 class 0x028000
    [ 1.456921] pci 0000:02:00.0: reg 0x10: [mem 0xc3400000-0xc3401fff 64bit]
    [ 1.457132] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 1.466741] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.466749] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 1.466756] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
    [ 1.466765] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.466869] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
    [ 1.466888] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
    [ 1.466916] pci 0000:03:00.0: reg 0x18: [mem 0xc1404000-0xc1404fff 64bit pref]
    [ 1.466934] pci 0000:03:00.0: reg 0x20: [mem 0xc1400000-0xc1403fff 64bit pref]
    [ 1.466946] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
    [ 1.467011] pci 0000:03:00.0: supports D1 D2
    [ 1.467012] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.467054] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 1.476687] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 1.476695] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    [ 1.476702] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
    [ 1.476712] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.476826] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
    [ 1.476839] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 1.476840] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 1.476842] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 1.476843] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
    [ 1.477284] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 1.477332] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.477378] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.477428] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 1.477474] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.477521] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.477569] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 1.477615] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 1.680263] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
    [ 1.680266] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 1.680268] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 1.680328] PCI host bridge to bus 0000:7f
    [ 1.680331] pci_bus 0000:7f: root bus resource [bus 7f]
    [ 1.680335] pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000
    [ 1.680372] pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000
    [ 1.680411] pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000
    [ 1.680444] pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000
    [ 1.680478] pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000
    [ 1.680511] pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000
    [ 1.680856] ACPI: Enabled 7 GPEs in block 00 to 3F
    [ 1.680862] ACPI: \_SB_.PCI0: notify handler is installed
    [ 1.680897] ACPI: \_SB_.CPBG: notify handler is installed
    [ 1.680908] Found 2 acpi root devices
    [ 1.680944] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 1.681029] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.681034] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 1.681036] vgaarb: loaded
    [ 1.681036] vgaarb: bridge control possible 0000:01:00.0
    [ 1.681037] vgaarb: no bridge control possible 0000:00:02.0
    [ 1.681073] PCI: Using ACPI for IRQ routing
    [ 1.685883] PCI: pci_cache_line_size set to 64 bytes
    [ 1.685985] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
    [ 1.685987] e820: reserve RAM buffer [mem 0x9b63f000-0x9bffffff]
    [ 1.685988] e820: reserve RAM buffer [mem 0x9b800000-0x9bffffff]
    [ 1.686076] NetLabel: Initializing
    [ 1.686077] NetLabel: domain hash size = 128
    [ 1.686078] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.686090] NetLabel: unlabeled traffic allowed by default
    [ 1.686116] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.686121] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.688150] Switched to clocksource hpet
    [ 1.692075] pnp: PnP ACPI init
    [ 1.692093] ACPI: bus type PNP registered
    [ 1.692220] pnp 00:00: [dma 4]
    [ 1.692249] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.692269] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.692384] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.692417] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.692471] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 1.692473] system 00:04: [io 0x0800-0x080f] has been reserved
    [ 1.692475] system 00:04: [io 0xffff] has been reserved
    [ 1.692477] system 00:04: [io 0xffff] has been reserved
    [ 1.692479] system 00:04: [io 0x0400-0x047f] could not be reserved
    [ 1.692480] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 1.692482] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 1.692484] system 00:04: [io 0x0380-0x038e] has been reserved
    [ 1.692487] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.692512] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.692543] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.692578] pnp 00:07: Plug and Play ACPI device, IDs SYN1e1d SYN1e00 SYN0002 PNP0f13 (active)
    [ 1.692691] pnp 00:08: Plug and Play ACPI device, IDs HPQ0004 (active)
    [ 1.692891] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.692893] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 1.692895] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.692897] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.692899] system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
    [ 1.692900] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.692905] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.692906] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.692908] system 00:09: [mem 0xc4600000-0xc4600fff] has been reserved
    [ 1.692911] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.891768] pnp: PnP ACPI: found 10 devices
    [ 1.891775] ACPI: bus type PNP unregistered
    [ 1.898277] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    [ 1.898281] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 1.898320] pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref]
    [ 1.898323] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.898326] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.898328] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
    [ 1.898331] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.898334] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.898337] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 1.898343] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
    [ 1.898347] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.898355] pci 0000:03:00.0: BAR 6: assigned [mem 0xc1410000-0xc141ffff pref]
    [ 1.898356] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 1.898359] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    [ 1.898365] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
    [ 1.898369] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.898376] pci 0000:00:1e.0: PCI bridge to [bus 04]
    [ 1.898391] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.898392] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.898394] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.898395] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
    [ 1.898397] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
    [ 1.898399] pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff]
    [ 1.898400] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.898402] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
    [ 1.898403] pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff]
    [ 1.898405] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.898406] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
    [ 1.898408] pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff]
    [ 1.898409] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.898411] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 1.898413] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 1.898414] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.898416] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff]
    [ 1.898448] NET: Registered protocol family 2
    [ 1.898658] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.898905] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.899101] TCP: Hash tables configured (established 65536 bind 65536)
    [ 1.899137] TCP: reno registered
    [ 1.899150] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.899184] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.899281] NET: Registered protocol family 1
    [ 1.899297] pci 0000:00:02.0: Boot video device
    [ 1.924902] PCI: CLS 64 bytes, default 64
    [ 1.924949] Unpacking initramfs...
    [ 1.973386] Freeing initrd memory: 2960K (ffff880037a28000 - ffff880037d0c000)
    [ 1.973392] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.973394] software IO TLB [mem 0x9763f000-0x9b63f000] (64MB) mapped at [ffff88009763f000-ffff88009b63efff]
    [ 1.973427] Simple Boot Flag at 0x44 set to 0x1
    [ 1.973607] Scanning for low memory corruption every 60 seconds
    [ 1.973892] audit: initializing netlink socket (disabled)
    [ 1.973905] type=2000 audit(1389034724.406:1): initialized
    [ 1.984356] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.985602] zbud: loaded
    [ 1.985767] VFS: Disk quotas dquot_6.5.2
    [ 1.985802] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.985955] msgmni has been set to 15569
    [ 1.986298] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.986347] io scheduler noop registered
    [ 1.986349] io scheduler deadline registered
    [ 1.986371] io scheduler cfq registered (default)
    [ 1.986564] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 1.986816] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.986829] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.986868] vesafb: mode is 1600x900x32, linelength=6400, pages=0
    [ 1.986869] vesafb: scrolling: redraw
    [ 1.986870] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 1.987210] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90008f00000, using 5632k, total 5632k
    [ 2.194780] Console: switching to colour frame buffer device 200x56
    [ 2.401807] fb0: VESA VGA frame buffer device
    [ 2.401818] intel_idle: MWAIT substates: 0x1120
    [ 2.401819] intel_idle: v0.4 model 0x25
    [ 2.401820] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.401952] GHES: HEST is not enabled!
    [ 2.402009] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.402448] Linux agpgart interface v0.103
    [ 2.402509] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.424294] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.424318] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.424413] mousedev: PS/2 mouse device common for all mice
    [ 2.426083] rtc_cmos 00:05: RTC can wake from S4
    [ 2.426226] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 2.426258] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 2.426312] drop_monitor: Initializing network drop monitor service
    [ 2.426376] TCP: cubic registered
    [ 2.426451] NET: Registered protocol family 10
    [ 2.426607] NET: Registered protocol family 17
    [ 2.426615] Key type dns_resolver registered
    [ 2.426872] registered taskstats version 1
    [ 2.427642] Magic number: 14:769:998
    [ 2.427665] pnp 00:00: hash matches
    [ 2.427763] rtc_cmos 00:05: setting system clock to 2014-01-06 18:58:45 UTC (1389034725)
    [ 2.427806] PM: Hibernation image not present or could not be loaded.
    [ 2.428656] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    [ 2.428658] Write protecting the kernel read-only data: 8192k
    [ 2.430898] Freeing unused kernel memory: 1008K (ffff880001504000 - ffff880001600000)
    [ 2.431903] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
    [ 2.444295] systemd-udevd[57]: starting version 208
    [ 2.454799] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.473820] SCSI subsystem initialized
    [ 2.474804] ACPI: bus type USB registered
    [ 2.474841] usbcore: registered new interface driver usbfs
    [ 2.474855] usbcore: registered new interface driver hub
    [ 2.474933] usbcore: registered new device driver usb
    [ 2.474994] libata version 3.00 loaded.
    [ 2.475610] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.475775] ehci-pci: EHCI PCI platform driver
    [ 2.475950] ehci-pci 0000:00:1a.0: setting latency timer to 64
    [ 2.475967] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 2.475975] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 2.475992] ehci-pci 0000:00:1a.0: debug port 2
    [ 2.479915] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.479939] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc450a000
    [ 2.487831] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.488136] hub 1-0:1.0: USB hub found
    [ 2.488148] hub 1-0:1.0: 3 ports detected
    [ 2.488623] ahci 0000:00:1f.2: version 3.0
    [ 2.488766] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 2.488870] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
    [ 2.488874] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
    [ 2.488880] ahci 0000:00:1f.2: setting latency timer to 64
    [ 2.508305] scsi0 : ahci
    [ 2.508478] scsi1 : ahci
    [ 2.508661] scsi2 : ahci
    [ 2.508872] scsi3 : ahci
    [ 2.509076] scsi4 : ahci
    [ 2.509232] scsi5 : ahci
    [ 2.509314] ata1: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508100 irq 41
    [ 2.509319] ata2: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508180 irq 41
    [ 2.509322] ata3: DUMMY
    [ 2.509324] ata4: DUMMY
    [ 2.509328] ata5: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508300 irq 41
    [ 2.509332] ata6: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508380 irq 41
    [ 2.509617] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 2.509640] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 2.509655] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 2.509681] ehci-pci 0000:00:1d.0: debug port 2
    [ 2.513619] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.513636] ehci-pci 0000:00:1d.0: irq 21, io mem 0xc4509000
    [ 2.521138] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.521432] hub 2-0:1.0: USB hub found
    [ 2.521446] hub 2-0:1.0: 3 ports detected
    [ 2.794491] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 2.827773] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.827866] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.830049] ata2.00: ATAPI: hp BD-ROM BC-5501H, 2.90, max UDMA/100
    [ 2.831101] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.831251] ata1.00: ATA-8: Corsair CSSD-F60GB2, 2.0, max UDMA/133
    [ 2.831257] ata1.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 2.832374] ata2.00: configured for UDMA/100
    [ 2.834382] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.841297] ata1.00: configured for UDMA/133
    [ 2.841651] scsi 0:0:0:0: Direct-Access ATA Corsair CSSD-F60 2.0 PQ: 0 ANSI: 5
    [ 2.842799] scsi 1:0:0:0: CD-ROM hp BD ROM BC-5501H 2.90 PQ: 0 ANSI: 5
    [ 2.918525] hub 1-1:1.0: USB hub found
    [ 2.918713] hub 1-1:1.0: 6 ports detected
    [ 2.974340] tsc: Refined TSC clocksource calibration: 2527.281 MHz
    [ 3.024393] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 3.148413] hub 2-1:1.0: USB hub found
    [ 3.148604] hub 2-1:1.0: 8 ports detected
    [ 3.227872] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
    [ 3.231028] ata5.00: ATA-8: TOSHIBA MK5075GSX, GT001U, max UDMA/100
    [ 3.231032] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 3.232183] ata5.00: configured for UDMA/100
    [ 3.232540] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MK5075GS GT00 PQ: 0 ANSI: 5
    [ 3.236887] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
    [ 3.236939] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 3.236941] sd 4:0:0:0: [sdb] 4096-byte physical blocks
    [ 3.237016] sd 4:0:0:0: [sdb] Write Protect is off
    [ 3.237019] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 3.237035] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.237040] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.237050] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.237086] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.237518] sda: sda1 sda2 sda3 sda4
    [ 3.237920] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 3.237923] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 3.237954] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.238066] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 3.280297] sdb: sdb1 sdb3
    [ 3.281140] sd 4:0:0:0: [sdb] Attached SCSI disk
    [ 3.320840] hidraw: raw HID events driver (C) Jiri Kosina
    [ 3.324133] usbcore: registered new interface driver usbhid
    [ 3.324137] usbhid: USB HID core driver
    [ 3.324888] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
    [ 3.325079] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1a.0-1.1/input0
    [ 3.384362] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
    [ 3.550965] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
    [ 3.714287] usb 2-1.5: new high-speed USB device number 4 using ehci-pci
    [ 3.795307] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.853249] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 3.854872] systemd[1]: Set hostname to <HP-DV7>.
    [ 3.858373] systemd-fstab-generator[118]: Mount point swap is not a valid path, ignoring.
    [ 3.909882] systemd[1]: Cannot add dependency job for unit atieventsd.service, ignoring: Unit acpid.socket failed to load: No such file or directory.
    [ 3.910099] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.910161] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.910174] systemd[1]: Starting Login Prompts.
    [ 3.910186] systemd[1]: Reached target Login Prompts.
    [ 3.910195] systemd[1]: Starting Remote File Systems.
    [ 3.910203] systemd[1]: Reached target Remote File Systems.
    [ 3.910213] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.910241] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.910250] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.910267] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.910276] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.910299] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.910309] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.910330] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.910359] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.910451] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.910465] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 3.910492] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 3.910501] systemd[1]: Starting Paths.
    [ 3.910535] systemd[1]: Reached target Paths.
    [ 3.910550] systemd[1]: Starting udev Kernel Socket.
    [ 3.910571] systemd[1]: Listening on udev Kernel Socket.
    [ 3.910582] systemd[1]: Starting udev Control Socket.
    [ 3.910602] systemd[1]: Listening on udev Control Socket.
    [ 3.910612] systemd[1]: Starting Journal Socket.
    [ 3.910647] systemd[1]: Listening on Journal Socket.
    [ 3.910661] systemd[1]: Starting udev Coldplug all Devices...
    [ 3.911488] systemd[1]: Starting Apply Kernel Variables...
    [ 3.911775] systemd[1]: Mounting Huge Pages File System...
    [ 3.912052] systemd[1]: Mounting POSIX Message Queue File System...
    [ 3.914336] systemd[1]: Starting Load Kernel Modules...
    [ 3.919413] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 3.920515] systemd[1]: Started Set Up Additional Binary Formats.
    [ 3.920540] systemd[1]: Starting Journal Service...
    [ 3.920857] systemd[1]: Started Journal Service.
    [ 3.934908] systemd-journald[130]: Vacuuming done, freed 0 bytes
    [ 3.936662] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [ 3.936668] ACPI: Power Button [PWRB]
    [ 3.936710] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    [ 3.937069] ACPI: Lid Switch [LID0]
    [ 3.937129] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 3.937132] ACPI: Power Button [PWRF]
    [ 3.938040] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 3.938042] AMD IOMMUv2 functionality not available on this system
    [ 3.968968] EXT4-fs (sda4): re-mounted. Opts: discard
    [ 3.974125] Switched to clocksource tsc
    [ 3.990703] systemd-udevd[155]: starting version 208
    [ 3.994113] systemd-journald[130]: Received request to flush runtime journal from PID 1
    [ 4.011409] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 4.011415] Disabling lock debugging due to kernel taint
    [ 4.022291] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7558 MBytes.
    [ 4.022509] <6>[fglrx] vendor: 1002 device: 68c1 count: 1
    [ 4.022812] <6>[fglrx] ioport: bar 4, base 0x4000, size: 0x100
    [ 4.022823] pci 0000:01:00.0: enabling device (0000 -> 0003)
    [ 4.023031] <6>[fglrx] Kernel PAT support is enabled
    [ 4.023051] <6>[fglrx] module loaded - fglrx 13.25.5 [Dec 6 2013] with 1 minors
    [ 4.092258] ACPI: Requesting acpi_cpufreq
    [ 4.101543] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
    [ 4.101553] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.101558] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 4.101563] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 4.101568] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 4.101573] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.101575] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 4.101580] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 4.101585] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 4.101589] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.101591] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 4.101595] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 4.101600] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 4.101604] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.101606] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 4.103941] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
    [ 4.104143] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
    [ 4.106273] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
    [ 4.106627] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
    [ 4.106742] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 4.108091] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
    [ 4.108226] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
    [ 4.108419] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 4.109161] mei_me 0000:00:16.0: setting latency timer to 64
    [ 4.109212] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
    [ 4.116824] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
    [ 4.116833] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.125699] [drm] Initialized drm 1.1.0 20060810
    [ 4.151578] [Firmware Bug]: Invalid critical threshold (0)
    [ 4.152801] hp_accel: hardware type DV7 found
    [ 4.153398] lis3lv02d: 8 bits sensor found
    [ 4.162429] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 4.162451] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 4.162458] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
    [ 4.162734] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
    [ 4.163141] [drm] Memory usable by graphics device = 2048M
    [ 4.163146] checking generic (b0000000 580000) vs hw (b0000000 10000000)
    [ 4.163149] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 4.163171] Console: switching to colour dummy device 80x25
    [ 4.163258] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc90008efe000, 78:ac:c0:41:2a:dc, XID 083000c0 IRQ 43
    [ 4.163262] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 4.165071] thermal LNXTHERM:00: registered as thermal_zone0
    [ 4.165073] ACPI: Thermal Zone [TZ01] (60 C)
    [ 4.167001] i915 0000:00:02.0: setting latency timer to 64
    [ 4.189598] Bluetooth: Core ver 2.16
    [ 4.189618] NET: Registered protocol family 31
    [ 4.189620] Bluetooth: HCI device and connection manager initialized
    [ 4.189632] Bluetooth: HCI socket layer initialized
    [ 4.189636] Bluetooth: L2CAP socket layer initialized
    [ 4.189642] Bluetooth: SCO socket layer initialized
    [ 4.189750] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.193820] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
    [ 4.200427] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 4.200432] Copyright(c) 2003-2013 Intel Corporation
    [ 4.200504] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
    [ 4.200613] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 4.200826] iwlwifi 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 4.203438] usbcore: registered new interface driver btusb
    [ 4.206393] iwlwifi 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
    [ 4.209620] i915 0000:00:02.0: irq 45 for MSI/MSI-X
    [ 4.209634] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 4.209636] [drm] Driver supports precise vblank timestamp query.
    [ 4.209838] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
    [ 4.212021] input: PC Speaker as /devices/platform/pcspkr/input/input7
    [ 4.224616] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
    [ 4.235557] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 4.235562] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 4.235564] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 4.235566] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
    [ 4.235664] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4.259013] fbcon: inteldrmfb (fb0) is primary device
    [ 4.262350] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 4.284850] iTCO_vendor_support: vendor-support=0
    [ 4.285523] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 4.285561] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
    [ 4.285676] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.286793] media: Linux media interface: v0.10
    [ 4.290737] Linux video capture interface: v2.00
    [ 4.301250] systemd-udevd[174]: renamed network interface eth0 to enp3s0
    [ 4.302202] uvcvideo: Found UVC 1.00 device HP Webcam (064e:f209)
    [ 4.304880] cfg80211: World regulatory domain updated:
    [ 4.304881] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 4.304883] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 4.304883] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 4.304884] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
    [ 4.304885] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
    [ 4.304886] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
    [ 4.304887] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
    [ 4.309128] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input9
    [ 4.309335] usbcore: registered new interface driver uvcvideo
    [ 4.309336] USB Video Class driver (1.1.1)
    [ 4.311646] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
    [ 4.316794] ACPI: Battery Slot [BAT0] (battery present)
    [ 4.325688] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
    [ 4.327465] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
    [ 4.328001] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 4.337248] systemd-udevd[192]: renamed network interface wlan0 to wlo1
    [ 4.345739] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
    [ 4.355989] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4.364320] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
    [ 4.398187] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4.405698] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
    [ 4.414845] ACPI: AC Adapter [ACAD] (on-line)
    [ 4.415293] wmi: Mapper loaded
    [ 4.435932] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
    [ 4.467799] input: HP WMI hotkeys as /devices/virtual/input/input10
    [ 4.498300] r8169 0000:03:00.0 enp3s0: link down
    [ 4.498337] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    [ 5.050228] Console: switching to colour frame buffer device 200x56
    [ 5.056819] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 5.056821] i915 0000:00:02.0: registered panic notifier
    [ 5.062898] acpi device:02: registered as cooling_device5
    [ 5.063042] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 5.063105] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
    [ 5.074847] acpi device:14: registered as cooling_device6
    [ 5.081681] acpi device:15: registered as cooling_device7
    [ 5.081715] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
    [ 5.081795] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/LNXVIDEO:02/input/input12
    [ 5.081995] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 5.082246] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 5.096419] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input13
    [ 5.114610] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
    [ 5.114695] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 5.114984] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 5.115037] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
    [ 5.123576] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
    [ 5.343735] wlo1: authenticate with 04:a1:51:18:3f:5a
    [ 5.357336] wlo1: send auth to 04:a1:51:18:3f:5a (try 1/3)
    [ 5.360056] wlo1: authenticated
    [ 5.363243] wlo1: associate with 04:a1:51:18:3f:5a (try 1/3)
    [ 5.367023] wlo1: RX AssocResp from 04:a1:51:18:3f:5a (capab=0x411 status=0 aid=1)
    [ 5.370719] wlo1: associated
    [ 5.370764] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
    [ 5.649701] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 631163
    [ 5.737424] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
    [ 9.301633] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
    [ 12.411184] systemd-journald[130]: File /var/log/journal/9f3480e1044d4c389152563598411bae/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 12.848912] fuse init (API version 7.22)
    [ 14.026946] traps: cinnamon[570] trap int3 ip:7ff3d815c289 sp:7fffd52060f0 error:0
    [ 14.114772] systemd-journald[130]: Deleted empty journal /var/log/journal/9f3480e1044d4c389152563598411bae/[email protected]~ (3256320 bytes).
    [ 14.116644] systemd-journald[130]: Vacuuming done, freed 10727424 bytes
    [ 14.129219] systemd-journald[130]: Failed to write entry (26 items, 14336620 bytes) despite vacuuming, ignoring: Argument list too long
    [ 14.305135] ISO 9660 Extensions: Microsoft Joliet Level 3
    [ 14.347792] ISO 9660 Extensions: RRIP_1991A
    [ 62.027286] Corrupted low memory at ffff880000006598 (6598 phys) = 100000000000
    [ 62.027363] ------------[ cut here ]------------
    [ 62.027373] WARNING: CPU: 0 PID: 45 at arch/x86/kernel/check.c:140 check_for_bios_corruption+0x10f/0x120()
    [ 62.027375] Memory corruption detected in low memory
    [ 62.027417] Modules linked in: nls_utf8 isofs fuse snd_hda_codec_hdmi snd_hda_codec_idt hp_wmi sparse_keymap joydev intel_powerclamp coretemp kvm_intel kvm crc32c_intel uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media iTCO_wdt iTCO_vendor_support arc4 iwldvm mac80211 microcode psmouse serio_raw pcspkr btusb iwlwifi bluetooth cfg80211 r8169 snd_hda_intel rfkill hp_accel mii i915 thermal snd_hda_codec lis3lv02d wmi snd_hwdep snd_pcm input_polldev drm_kms_helper snd_page_alloc ac video drm snd_timer i2c_i801 i2c_algo_bit snd battery mei_me i2c_core soundcore intel_agp mei shpchp intel_ips intel_gtt lpc_ich acpi_cpufreq processor evdev fglrx(PO) amd_iommu_v2 button ext4 crc16 mbcache jbd2 hid_generic usbhid hid sr_mod cdrom sd_mod ahci ehci_pci ehci_hcd libahci libata scsi_mod
    [ 62.027498] usbcore usb_common
    [ 62.027504] CPU: 0 PID: 45 Comm: kworker/0:2 Tainted: P O 3.12.6-1-ARCH #1
    [ 62.027506] Hardware name: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
    [ 62.027511] Workqueue: events check_corruption
    [ 62.027513] 0000000000000009 ffff88024f0b5d30 ffffffff814ee4fb ffff88024f0b5d78
    [ 62.027518] ffff88024f0b5d68 ffffffff81062bcd 0000000000000000 ffff880000010000
    [ 62.027521] ffffffff81a28c50 0000000000000001 ffff880000000000 ffff88024f0b5dc8
    [ 62.027525] Call Trace:
    [ 62.027534] [<ffffffff814ee4fb>] dump_stack+0x54/0x8d
    [ 62.027541] [<ffffffff81062bcd>] warn_slowpath_common+0x7d/0xa0
    [ 62.027545] [<ffffffff81062c3c>] warn_slowpath_fmt+0x4c/0x50
    [ 62.027548] [<ffffffff8105046f>] check_for_bios_corruption+0x10f/0x120
    [ 62.027552] [<ffffffff8105048e>] check_corruption+0xe/0x40
    [ 62.027558] [<ffffffff8107dbc7>] process_one_work+0x167/0x450
    [ 62.027561] [<ffffffff8107e5d1>] worker_thread+0x121/0x3a0
    [ 62.027565] [<ffffffff8107e4b0>] ? manage_workers.isra.23+0x2b0/0x2b0
    [ 62.027572] [<ffffffff81084fe0>] kthread+0xc0/0xd0
    [ 62.027576] [<ffffffff81084f20>] ? kthread_create_on_node+0x120/0x120
    [ 62.027581] [<ffffffff814fcffc>] ret_from_fork+0x7c/0xb0
    [ 62.027585] [<ffffffff81084f20>] ? kthread_create_on_node+0x120/0x120
    [ 62.027588] ---[ end trace 7db8b9483b232f3c ]---
    [ 379.895022] systemd-journald[130]: Vacuuming done, freed 7458816 bytes
    [ 382.437200] usb 2-1.1: new high-speed USB device number 5 using ehci-pci
    [ 382.535763] usb-storage 2-1.1:1.0: USB Mass Storage device detected
    [ 382.535904] scsi6 : usb-storage 2-1.1:1.0
    [ 382.536046] usbcore: registered new interface driver usb-storage
    [ 383.537746] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Glide 1.26 PQ: 0 ANSI: 5
    [ 383.539529] sd 6:0:0:0: [sdc] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
    [ 383.541031] sd 6:0:0:0: [sdc] Write Protect is off
    [ 383.541037] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
    [ 383.542023] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 383.554355] sdc: sdc1
    [ 383.558183] sd 6:0:0:0: [sdc] Attached SCSI removable disk
    If I run aticonfig --intial, xorg does not start and the dmesg output is:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 ro quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000025bffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.6 present.
    [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x25c000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-combining
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 2 base 080000000 mask FE0000000 write-back
    [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 09B800000 mask FFF800000 uncachable
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask F80000000 write-back
    [ 0.000000] 7 base 25C000000 mask FFC000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b800 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25be00000-0x25bfffff

    I have toyed with the catalyst-total-pxp configuration and it will now launch x but executing a cinnamon session kicks me back out into the console.
    E: Dmesg output and Xorg log both look fine (to me).
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Jan 16 09:16:34 CET 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 rw
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000025bffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.6 present.
    [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x25c000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-combining
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 2 base 080000000 mask FE0000000 write-back
    [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 09B800000 mask FFF800000 uncachable
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask F80000000 write-back
    [ 0.000000] 7 base 25C000000 mask FFC000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b800 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25be00000-0x25bffffff]
    [ 0.000000] [mem 0x25be00000-0x25bffffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x258000000-0x25bdfffff]
    [ 0.000000] [mem 0x258000000-0x25bdfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x257ffffff]
    [ 0.000000] [mem 0x200000000-0x257ffffff] page 2M
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9b63efff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x9b5fffff] page 2M
    [ 0.000000] [mem 0x9b600000-0x9b63efff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9b7ff000-0x9b7fffff]
    [ 0.000000] [mem 0x9b7ff000-0x9b7fffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
    [ 0.000000] [mem 0x100000000-0x1fbffffff] page 2M
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x37a28000-0x37d0bfff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 000000009b7fe120 0007C (v01 HPQOEM SLIC-MPC 00000001 01000013)
    [ 0.000000] ACPI: FACP 000000009b7fc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 000000009b7e9000 0F50F (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: FACS 000000009b75e000 00040
    [ 0.000000] ACPI: ASF! 000000009b7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: HPET 000000009b7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: APIC 000000009b7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 000000009b7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 SLIC 000F4240)
    [ 0.000000] ACPI: BOOT 000000009b7e5000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: ASPT 000000009b7e2000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: WDAT 000000009b7e1000 00224 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000009b7e0000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 000000009b7de000 01B34 (v01 AmdRef AmdTabl 00001000 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025bffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25bffffff]
    [ 0.000000] NODE_DATA [mem 0x25bff5000-0x25bff9fff]
    [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880253600000-ffff88025b5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x25bffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x9b63efff]
    [ 0.000000] node 0: [mem 0x9b7ff000-0x9b7fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x1fbffffff]
    [ 0.000000] node 0: [mem 0x200000000-0x25bffffff]
    [ 0.000000] On node 0 totalpages: 2045404
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9881 pages used for memmap
    [ 0.000000] DMA32 zone: 632384 pages, LIFO batch:31
    [ 0.000000] Normal zone: 22272 pages used for memmap
    [ 0.000000] Normal zone: 1409024 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b63f000-0x9b6befff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b6bf000-0x9b7befff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b7bf000-0x9b7fefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b800000-0x9fffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffe7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffe80000-0xffffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
    [ 0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025bc00000 s86464 r8192 d24128 u262144
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2013166
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 rw
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7968736K/8181616K available (5116K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 212880K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2527.115 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.82 BogoMIPS (lpj=8423716)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000034] Security Framework initialized
    [ 0.000044] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000045] Yama: becoming mindful.
    [ 0.000540] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.002404] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.003228] Mount-cache hash table entries: 256
    [ 0.003423] Initializing cgroup subsys memory
    [ 0.003435] Initializing cgroup subsys devices
    [ 0.003437] Initializing cgroup subsys freezer
    [ 0.003439] Initializing cgroup subsys net_cls
    [ 0.003440] Initializing cgroup subsys blkio
    [ 0.003461] CPU: Physical Processor ID: 0
    [ 0.003462] CPU: Processor Core ID: 0
    [ 0.003467] mce: CPU supports 9 MCE banks
    [ 0.003478] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003488] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 6
    [ 0.003577] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.004553] ACPI: Core revision 20130725
    [ 0.013862] ACPI: All ACPI Tables successfully acquired
    [ 0.040074] ftrace: allocating 20317 entries in 80 pages
    [ 0.050041] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.083030] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz (fam: 06, model: 25, stepping: 05)
    [ 0.187276] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
    [ 0.187282] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
    [ 0.187285] ... version: 3
    [ 0.187285] ... bit width: 48
    [ 0.187286] ... generic registers: 4
    [ 0.187287] ... value mask: 0000ffffffffffff
    [ 0.187288] ... max period: 000000007fffffff
    [ 0.187289] ... fixed-purpose events: 3
    [ 0.187290] ... event mask: 000000070000000f
    [ 0.663841] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.650477] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
    [ 0.703729] Brought up 4 CPUs
    [ 0.703734] smpboot: Total of 4 processors activated (20225.29 BogoMIPS)
    [ 0.706247] devtmpfs: initialized
    [ 0.709362] PM: Registering ACPI NVS region [mem 0x9b6bf000-0x9b7befff] (1048576 bytes)
    [ 0.710207] RTC time: 6:14:18, date: 01/25/14
    [ 0.710248] NET: Registered protocol family 16
    [ 0.710345] cpuidle: using governor ladder
    [ 0.710347] cpuidle: using governor menu
    [ 0.710375] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.710377] ACPI: bus type PCI registered
    [ 0.710379] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.710443] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
    [ 0.710446] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
    [ 0.717442] PCI: Using configuration type 1 for base access
    [ 0.718023] bio: create slab <bio-0> at 0
    [ 0.718137] ACPI: Added _OSI(Module Device)
    [ 0.718139] ACPI: Added _OSI(Processor Device)
    [ 0.718140] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.718141] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.719738] ACPI: EC: Look up EC in DSDT
    [ 0.727062] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.732709] ACPI: SSDT 000000009b691918 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.733085] ACPI: Dynamic OEM Table Load:
    [ 0.733087] ACPI: SSDT (null) 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.733226] ACPI: SSDT 000000009b68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.733586] ACPI: Dynamic OEM Table Load:
    [ 0.733588] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.757289] ACPI: SSDT 000000009b690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.757699] ACPI: Dynamic OEM Table Load:
    [ 0.757701] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.767184] ACPI: SSDT 000000009b68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.767569] ACPI: Dynamic OEM Table Load:
    [ 0.767571] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.827076] ACPI: Interpreter enabled
    [ 0.827091] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 0.827097] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.827117] ACPI: (supports S0 S3 S4 S5)
    [ 0.827119] ACPI: Using IOAPIC for interrupt routing
    [ 0.827154] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.827263] ACPI: No dock devices found.
    [ 1.461183] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
    [ 1.461215] \_SB_.PCI0:_OSC invalid UUID
    [ 1.461216] _OSC request data:1 8 0
    [ 1.461245] \_SB_.PCI0:_OSC invalid UUID
    [ 1.461246] _OSC request data:1 1f 0
    [ 1.461249] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 1.461251] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 1.461907] PCI host bridge to bus 0000:00
    [ 1.461911] pci_bus 0000:00: root bus resource [bus 00-7e]
    [ 1.461912] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.461914] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.461915] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.461917] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff]
    [ 1.461925] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
    [ 1.461941] DMAR: Disabling batched IOTLB flush on Ironlake
    [ 1.462003] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
    [ 1.462034] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.462069] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 1.462102] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
    [ 1.462112] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
    [ 1.462118] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 1.462122] pci 0000:00:02.0: reg 0x20: [io 0x5050-0x5057]
    [ 1.462225] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
    [ 1.462253] pci 0000:00:16.0: reg 0x10: [mem 0xc4504000-0xc450400f 64bit]
    [ 1.462346] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.462430] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
    [ 1.462844] pci 0000:00:1a.0: reg 0x10: [mem 0xc450a000-0xc450a3ff]
    [ 1.465285] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.465342] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 1.465384] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
    [ 1.465404] pci 0000:00:1b.0: reg 0x10: [mem 0xc4500000-0xc4503fff 64bit]
    [ 1.465500] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.465545] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 1.465580] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
    [ 1.465677] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.465723] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.465756] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
    [ 1.465853] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.465899] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 1.465946] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
    [ 1.466360] pci 0000:00:1d.0: reg 0x10: [mem 0xc4509000-0xc45093ff]
    [ 1.468800] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.468856] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1.468891] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 1.468992] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 1.469026] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
    [ 1.469192] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
    [ 1.469218] pci 0000:00:1f.2: reg 0x10: [io 0x5048-0x504f]
    [ 1.469229] pci 0000:00:1f.2: reg 0x14: [io 0x505c-0x505f]
    [ 1.469239] pci 0000:00:1f.2: reg 0x18: [io 0x5040-0x5047]
    [ 1.469250] pci 0000:00:1f.2: reg 0x1c: [io 0x5058-0x505b]
    [ 1.469261] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
    [ 1.469272] pci 0000:00:1f.2: reg 0x24: [mem 0xc4508000-0xc45087ff]
    [ 1.469336] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.469405] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
    [ 1.469425] pci 0000:00:1f.3: reg 0x10: [mem 0xc4506000-0xc45060ff 64bit]
    [ 1.469455] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
    [ 1.469543] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
    [ 1.469570] pci 0000:00:1f.6: reg 0x10: [mem 0xc4507000-0xc4507fff 64bit]
    [ 1.469761] pci 0000:01:00.0: [1002:68c1] type 00 class 0x030000
    [ 1.469775] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.469785] pci 0000:01:00.0: reg 0x18: [mem 0xc4400000-0xc441ffff 64bit]
    [ 1.469792] pci 0000:01:00.0: reg 0x20: [io 0x4000-0x40ff]
    [ 1.469803] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
    [ 1.469840] pci 0000:01:00.0: supports D1 D2
    [ 1.469884] pci 0000:01:00.1: [1002:aa60] type 00 class 0x040300
    [ 1.469899] pci 0000:01:00.1: reg 0x10: [mem 0xc4420000-0xc4423fff 64bit]
    [ 1.469966] pci 0000:01:00.1: supports D1 D2
    [ 1.470024] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.470027] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.470029] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
    [ 1.470032] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.470151] pci 0000:02:00.0: [8086:0084] type 00 class 0x028000
    [ 1.470195] pci 0000:02:00.0: reg 0x10: [mem 0xc3400000-0xc3401fff 64bit]
    [ 1.470407] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 1.480075] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.480083] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 1.480090] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
    [ 1.480101] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.480205] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
    [ 1.480221] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
    [ 1.480247] pci 0000:03:00.0: reg 0x18: [mem 0xc1404000-0xc1404fff 64bit pref]
    [ 1.480264] pci 0000:03:00.0: reg 0x20: [mem 0xc1400000-0xc1403fff 64bit pref]
    [ 1.480276] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
    [ 1.480339] pci 0000:03:00.0: supports D1 D2
    [ 1.480340] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.480382] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 1.490020] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 1.490028] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    [ 1.490035] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
    [ 1.490046] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.490160] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
    [ 1.490173] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 1.490174] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 1.490176] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 1.490177] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
    [ 1.490618] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 1.490666] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.490712] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.490761] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 1.490808] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.490854] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.490902] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 1.490948] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 1.693626] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
    [ 1.693629] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 1.693631] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 1.693691] PCI host bridge to bus 0000:7f
    [ 1.693694] pci_bus 0000:7f: root bus resource [bus 7f]
    [ 1.693698] pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000
    [ 1.693735] pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000
    [ 1.693774] pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000
    [ 1.693808] pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000
    [ 1.693841] pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000
    [ 1.693875] pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000
    [ 1.694220] ACPI: Enabled 7 GPEs in block 00 to 3F
    [ 1.694226] ACPI: \_SB_.PCI0: notify handler is installed
    [ 1.694261] ACPI: \_SB_.CPBG: notify handler is installed
    [ 1.694272] Found 2 acpi root devices
    [ 1.694307] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 1.694393] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.694397] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 1.694399] vgaarb: loaded
    [ 1.694400] vgaarb: bridge control possible 0000:01:00.0
    [ 1.694401] vgaarb: no bridge control possible 0000:00:02.0
    [ 1.694436] PCI: Using ACPI for IRQ routing
    [ 1.699238] PCI: pci_cache_line_size set to 64 bytes
    [ 1.699337] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
    [ 1.699339] e820: reserve RAM buffer [mem 0x9b63f000-0x9bffffff]
    [ 1.699340] e820: reserve RAM buffer [mem 0x9b800000-0x9bffffff]
    [ 1.699428] NetLabel: Initializing
    [ 1.699429] NetLabel: domain hash size = 128
    [ 1.699430] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.699443] NetLabel: unlabeled traffic allowed by default
    [ 1.699467] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.699472] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.701500] Switched to clocksource hpet
    [ 1.705449] pnp: PnP ACPI init
    [ 1.705466] ACPI: bus type PNP registered
    [ 1.705591] pnp 00:00: [dma 4]
    [ 1.705621] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.705641] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.705757] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.705791] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.705846] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 1.705848] system 00:04: [io 0x0800-0x080f] has been reserved
    [ 1.705850] system 00:04: [io 0xffff] has been reserved
    [ 1.705852] system 00:04: [io 0xffff] has been reserved
    [ 1.705853] system 00:04: [io 0x0400-0x047f] could not be reserved
    [ 1.705855] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 1.705857] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 1.705858] system 00:04: [io 0x0380-0x038e] has been reserved
    [ 1.705861] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.705887] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.705918] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.705955] pnp 00:07: Plug and Play ACPI device, IDs SYN1e1d SYN1e00 SYN0002 PNP0f13 (active)
    [ 1.706069] pnp 00:08: Plug and Play ACPI device, IDs HPQ0004 (active)
    [ 1.706268] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.706270] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 1.706272] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.706274] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.706275] system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
    [ 1.706277] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.706281] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.706283] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.706285] system 00:09: [mem 0xc4600000-0xc4600fff] has been reserved
    [ 1.706287] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.905114] pnp: PnP ACPI: found 10 devices
    [ 1.905115] ACPI: bus type PNP unregistered
    [ 1.911635] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    [ 1.911639] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 1.911677] pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref]
    [ 1.911680] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.911682] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.911685] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
    [ 1.911687] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.911691] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.911694] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 1.911699] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
    [ 1.911704] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.911711] pci 0000:03:00.0: BAR 6: assigned [mem 0xc1410000-0xc141ffff pref]
    [ 1.911713] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 1.911716] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    [ 1.911721] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
    [ 1.911726] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.911733] pci 0000:00:1e.0: PCI bridge to [bus 04]
    [ 1.911747] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.911749] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.911750] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.911752] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
    [ 1.911753] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
    [ 1.911755] pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff]
    [ 1.911756] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.911758] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
    [ 1.911760] pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff]
    [ 1.911761] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.911763] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
    [ 1.911764] pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff]
    [ 1.911766] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.911767] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 1.911769] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 1.911770] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.911772] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff]
    [ 1.911805] NET: Registered protocol family 2
    [ 1.912015] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.912263] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.912459] TCP: Hash tables configured (established 65536 bind 65536)
    [ 1.912493] TCP: reno registered
    [ 1.912506] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.912542] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.912641] NET: Registered protocol family 1
    [ 1.912657] pci 0000:00:02.0: Boot video device
    [ 1.938251] PCI: CLS 64 bytes, default 64
    [ 1.938297] Unpacking initramfs...
    [ 1.987010] Freeing initrd memory: 2960K (ffff880037a28000 - ffff880037d0c000)
    [ 1.987017] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.987019] software IO TLB [mem 0x9763f000-0x9b63f000] (64MB) mapped at [ffff88009763f000-ffff88009b63efff]
    [ 1.987050] Simple Boot Flag at 0x44 set to 0x1
    [ 1.987234] Scanning for low memory corruption every 60 seconds
    [ 1.987523] audit: initializing netlink socket (disabled)
    [ 1.987536] type=2000 audit(1390630458.423:1): initialized
    [ 1.998005] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.999257] zbud: loaded
    [ 1.999421] VFS: Disk quotas dquot_6.5.2
    [ 1.999457] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.999614] msgmni has been set to 15569
    [ 1.999955] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 2.000004] io scheduler noop registered
    [ 2.000006] io scheduler deadline registered
    [ 2.000029] io scheduler cfq registered (default)
    [ 2.000219] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 2.000474] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 2.000487] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 2.000526] vesafb: mode is 1600x900x32, linelength=6400, pages=0
    [ 2.000528] vesafb: scrolling: redraw
    [ 2.000529] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 2.000872] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90008f00000, using 5632k, total 5632k
    [ 2.208493] Console: switching to colour frame buffer device 200x56
    [ 2.415572] fb0: VESA VGA frame buffer device
    [ 2.415583] intel_idle: MWAIT substates: 0x1120
    [ 2.415585] intel_idle: v0.4 model 0x25
    [ 2.415585] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.415721] GHES: HEST is not enabled!
    [ 2.415778] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.416220] Linux agpgart interface v0.103
    [ 2.416282] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.437802] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.437825] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.437928] mousedev: PS/2 mouse device common for all mice
    [ 2.439572] rtc_cmos 00:05: RTC can wake from S4
    [ 2.439720] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 2.439752] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 2.439804] drop_monitor: Initializing network drop monitor service
    [ 2.439867] TCP: cubic registered
    [ 2.439942] NET: Registered protocol family 10
    [ 2.440100] NET: Registered protocol family 17
    [ 2.440110] Key type dns_resolver registered
    [ 2.440362] registered taskstats version 1
    [ 2.441127] Magic number: 14:648:216
    [ 2.441252] rtc_cmos 00:05: setting system clock to 2014-01-25 06:14:19 UTC (1390630459)
    [ 2.441297] PM: Hibernation image not present or could not be loaded.
    [ 2.442333] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    [ 2.442335] Write protecting the kernel read-only data: 8192k
    [ 2.444650] Freeing unused kernel memory: 1016K (ffff880001502000 - ffff880001600000)
    [ 2.445600] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
    [ 2.458198] systemd-udevd[57]: starting version 208
    [ 2.466960] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.485606] SCSI subsystem initialized
    [ 2.487357] ACPI: bus type USB registered
    [ 2.487410] usbcore: registered new interface driver usbfs
    [ 2.487487] libata version 3.00 loaded.
    [ 2.487522] usbcore: registered new interface driver hub
    [ 2.487576] usbcore: registered new device driver usb
    [ 2.488154] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.488305] ehci-pci: EHCI PCI platform driver
    [ 2.488453] ehci-pci 0000:00:1a.0: setting latency timer to 64
    [ 2.488473] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 2.488484] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 2.488507] ehci-pci 0000:00:1a.0: debug port 2
    [ 2.492709] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.492734] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc450a000
    [ 2.501178] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.501456] hub 1-0:1.0: USB hub found
    [ 2.501468] hub 1-0:1.0: 3 ports detected
    [ 2.501772] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 2.501779] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 2.501786] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 2.501801] ehci-pci 0000:00:1d.0: debug port 2
    [ 2.505713] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.505733] ehci-pci 0000:00:1d.0: irq 21, io mem 0xc4509000
    [ 2.514513] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.514735] hub 2-0:1.0: USB hub found
    [ 2.514741] hub 2-0:1.0: 3 ports detected
    [ 2.514993] ahci 0000:00:1f.2: version 3.0
    [ 2.515120] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 2.515225] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
    [ 2.515229] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
    [ 2.515236] ahci 0000:00:1f.2: setting latency timer to 64
    [ 2.535192] scsi0 : ahci
    [ 2.535558] scsi1 : ahci
    [ 2.535764] scsi2 : ahci
    [ 2.535955] scsi3 : ahci
    [ 2.536149] scsi4 : ahci
    [ 2.536359] scsi5 : ahci
    [ 2.536451] ata1: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508100 irq 41
    [ 2.536457] ata2: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508180 irq 41
    [ 2.536459] ata3: DUMMY
    [ 2.536462] ata4: DUMMY
    [ 2.536467] ata5: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508300 irq 41
    [ 2.536471] ata6: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508380 irq 41
    [ 2.807839] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 2.854462] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.854564] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.854611] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.854735] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.856919] ata2.00: ATAPI: hp BD-ROM BC-5501H, 2.90, max UDMA/100
    [ 2.859217] ata2.00: configured for UDMA/100
    [ 2.861881] ata1.00: ATA-8: Corsair CSSD-F60GB2, 2.0, max UDMA/133
    [ 2.861886] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.871886] ata1.00: configured for UDMA/133
    [ 2.872196] scsi 0:0:0:0: Direct-Access ATA Corsair CSSD-F60 2.0 PQ: 0 ANSI: 5
    [ 2.873244] scsi 1:0:0:0: CD-ROM hp BD ROM BC-5501H 2.90 PQ: 0 ANSI: 5
    [ 2.903929] ata5.00: ATA-8: TOSHIBA MK5075GSX, GT001U, max UDMA/100
    [ 2.903933] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.905148] ata5.00: configured for UDMA/100
    [ 2.905285] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MK5075GS GT00 PQ: 0 ANSI: 5
    [ 2.909966] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
    [ 2.910041] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.910048] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.910091] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.910499] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.910501] sd 4:0:0:0: [sdb] 4096-byte physical blocks
    [ 2.910526] sd 4:0:0:0: [sdb] Write Protect is off
    [ 2.910528] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 2.910540] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.910633] sda: sda1 sda2 sda3 sda4
    [ 2.911010] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.911016] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.911095] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.911204] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 2.932118] hub 1-1:1.0: USB hub found
    [ 2.932226] hub 1-1:1.0: 6 ports detected
    [ 2.953159] sdb: sdb1 sdb3
    [ 2.953757] sd 4:0:0:0: [sdb] Attached SCSI disk
    [ 2.987624] tsc: Refined TSC clocksource calibration: 2527.285 MHz
    [ 3.037677] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 3.161529] hub 2-1:1.0: USB hub found
    [ 3.161615] hub 2-1:1.0: 8 ports detected
    [ 3.241106] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
    [ 3.333324] hidraw: raw HID events driver (C) Jiri Kosina
    [ 3.336248] usbcore: registered new interface driver usbhid
    [ 3.336250] usbhid: USB HID core driver
    [ 3.336850] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
    [ 3.337086] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1a.0-1.2/input0
    [ 3.397519] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
    [ 3.486816] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.546180] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 3.548701] systemd[1]: Set hostname to <HP-DV7>.
    [ 3.553751] systemd-fstab-generator[119]: Mount point swap is not a valid path, ignoring.
    [ 3.564291] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
    [ 3.601149] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 3.601160] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 3.601361] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.601419] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.601433] systemd[1]: Starting Remote File Systems.
    [ 3.602633] systemd[1]: Reached target Remote File Systems.
    [ 3.602645] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.604045] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.604055] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.605524] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.605534] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.606751] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.606760] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.608067] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.608103] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.610164] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.610180] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 3.610209] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 3.610218] systemd[1]: Starting Paths.
    [ 3.611135] systemd[1]: Reached target Paths.
    [ 3.611150] systemd[1]: Starting udev Kernel Socket.
    [ 3.612271] systemd[1]: Listening on udev Kernel Socket.
    [ 3.612284] systemd[1]: Starting udev Control Socket.
    [ 3.613423] systemd[1]: Listening on udev Control Socket.
    [ 3.613435] systemd[1]: Starting Journal Socket.
    [ 3.614518] systemd[1]: Listening on Journal Socket.
    [ 3.614535] systemd[1]: Starting udev Coldplug all Devices...
    [ 3.616439] systemd[1]: Starting Apply Kernel Variables...
    [ 3.617780] systemd[1]: Mounting Huge Pages File System...
    [ 3.619103] systemd[1]: Mounting POSIX Message Queue File System...
    [ 3.622065] systemd[1]: Starting Load Kernel Modules...
    [ 3.626618] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 3.629265] systemd[1]: Starting Set Up Additional Binary Formats...
    [ 3.630812] systemd[1]: Starting Journal Service...
    [ 3.633257] systemd[1]: Started Journal Service.
    [ 3.643151] systemd-journald[134]: Vacuuming done, freed 0 bytes
    [ 3.643416] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [ 3.643422] ACPI: Power Button [PWRB]
    [ 3.643483] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    [ 3.643552] EXT4-fs (sda4): re-mounted. Opts: discard
    [ 3.643855] ACPI: Lid Switch [LID0]
    [ 3.643927] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 3.643930] ACPI: Power Button [PWRF]
    [ 3.644676] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 3.644679] AMD IOMMUv2 functionality not available on this system
    [ 3.705533] systemd-udevd[157]: starting version 208
    [ 3.714133] usb 2-1.3: new full-speed USB device number 4 using ehci-pci
    [ 3.723418] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 3.723419] Disabling lock debugging due to kernel taint
    [ 3.734452] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7558 MBytes.
    [ 3.734648] <6>[fglrx] vendor: 1002 device: 68c1 count: 1
    [ 3.734918] <6>[fglrx] ioport: bar 4, base 0x4000, size: 0x100
    [ 3.734926] pci 0000:01:00.0: enabling device (0000 -> 0003)
    [ 3.735095] <6>[fglrx] Kernel PAT support is enabled
    [ 3.735114] <6>[fglrx] module loaded - fglrx 13.25.5 [Dec 6 2013] with 1 minors
    [ 3.783368] ACPI: Requesting acpi_cpufreq
    [ 3.784868] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 3.785719] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
    [ 3.785798] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 3.786504] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
    [ 3.786902] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
    [ 3.787185] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
    [ 3.787188] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.787192] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 3.787195] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 3.787198] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 3.787198] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.787200] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 3.787203] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 3.787205] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 3.787206] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.787208] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 3.787210] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 3.787213] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 3.787213] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.787214] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 3.788226] mei_me 0000:00:16.0: setting latency timer to 64
    [ 3.788279] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
    [ 3.803478] hp_accel: hardware type DV7 found
    [ 3.804108] lis3lv02d: 8 bits sensor found
    [ 3.806403] [drm] Initialized drm 1.1.0 20060810
    [ 3.817825] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    [ 3.820698] usb-storage 2-1.1:1.0: USB Mass Storage device detected
    [ 3.821478] scsi6 : usb-storage 2-1.1:1.0
    [ 3.822190] usbcore: registered new interface driver usb-storage
    [ 3.836293] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
    [ 3.840807] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
    [ 3.842785] [Firmware Bug]: Invalid critical threshold (0)
    [ 3.848265] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 3.848278] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 3.848284] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
    [ 3.848512] r8169 0000:03:00.0: irq 44 for MSI/MSI-X
    [ 3.848684] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc90000c4e000, 78:ac:c0:41:2a:dc, XID 083000c0 IRQ 44
    [ 3.848685] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 3.848994] thermal LNXTHERM:00: registered as thermal_zone0
    [ 3.848996] ACPI: Thermal Zone [TZ01] (60 C)
    [ 3.854926] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 3.855035] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 3.855410] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 3.855479] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
    [ 3.856762] [drm] Memory usable by graphics device = 2048M
    [ 3.856877] checking generic (b0000000 580000) vs hw (b0000000 10000000)
    [ 3.856906] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 3.861908] cfg80211: Calling CRDA to update world regulatory domain
    [ 3.867315] usb 2-1.5: new high-speed USB device number 5 using ehci-pci
    [ 3.872505] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
    [ 3.873734] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 3.873734] Copyright(c) 2003-2013 Intel Corporation
    [ 3.873811] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
    [ 3.875297] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 3.875446] iwlwifi 0000:02:00.0: irq 46 for MSI/MSI-X
    [ 3.879450] iwlwifi 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
    [ 3.879788] Bluetooth: Core ver 2.16
    [ 3.881003] NET: Registered protocol family 31
    [ 3.881005] Bluetooth: HCI device and connection manager initialized
    [ 3.881016] Bluetooth: HCI socket layer initialized
    [ 3.881019] Bluetooth: L2CAP socket layer initialized
    [ 3.881026] Bluetooth: SCO socket layer initialized
    [ 3.883938] usbcore: registered new interface driver btusb
    [ 3.884347] Console: switching to colour dummy device 80x25
    [ 3.886414] i915 0000:00:02.0: setting latency timer to 64
    [ 3.892348] ACPI: AC Adapter [ACAD] (on-line)
    [ 3.906181] systemd-journald[134]: Received request to flush runtime journal from PID 1
    [ 3.910134] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 3.910140] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 3.910142] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 3.910145] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
    [ 3.910257] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 3.930630] i915 0000:00:02.0: irq 47 for MSI/MSI-X
    [ 3.930654] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 3.930656] [drm] Driver supports precise vblank timestamp query.
    [ 3.931084] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
    [ 3.934147] input: PC Speaker as /devices/platform/pcspkr/input/input11
    [ 3.936986] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 3.950834] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
    [ 3.966690] fbcon: inteldrmfb (fb0) is primary device
    [ 3.987780] Switched to clocksource tsc
    [ 3.996141] iTCO_vendor_support: vendor-support=0
    [ 3.996902] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 3.996972] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
    [ 3.997186] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.022206] systemd-udevd[171]: renamed network interface eth0 to enp3s0
    [ 4.023553] cfg80211: World regulatory domain updated:
    [ 4.023554] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 4.023555] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 4.023556] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 4.023557] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
    [ 4.023558] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
    [ 4.023558] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
    [ 4.023559] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
    [ 4.080995] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
    [ 4.098822] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
    [ 4.099319] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
    [ 4.099803] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 4.100209] ACPI: Battery Slot [BAT0] (battery present)
    [ 4.100361] wmi: Mapper loaded
    [ 4.103136] input: HP WMI hotkeys as /devices/virtual/input/input13
    [ 4.104748] systemd-udevd[164]: renamed network interface wlan0 to wlo1
    [ 4.125347] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
    [ 4.240631] media: Linux media interface: v0.10
    [ 4.244154] Linux video capture interface: v2.00
    [ 4.252000] uvcvideo: Found UVC 1.00 device HP Webcam (064e:f209)
    [ 4.257341] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input14
    [ 4.257488] usbcore: registered new interface driver uvcvideo
    [ 4.257489] USB Video Class driver (1.1.1)
    [ 4.770357] Console: switching to colour frame buffer device 200x56
    [ 4.778627] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 4.778629] i915 0000:00:02.0: registered panic notifier
    [ 4.785739] acpi device:02: registered as cooling_device5
    [ 4.785956] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 4.786022] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15
    [ 4.797354] acpi device:14: registered as cooling_device6
    [ 4.802976] acpi device:15: registered as cooling_device7
    [ 4.803025] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
    [ 4.803087] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/LNXVIDEO:02/input/input16
    [ 4.803440] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 4.803977] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
    [ 4.805256] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
    [ 4.805400] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
    [ 4.805408] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.824848] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Glide 1.26 PQ: 0 ANSI: 5
    [ 4.827187] sd 6:0:0:0: [sdc] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
    [ 4.828646] sd 6:0:0:0: [sdc] Write Protect is off
    [ 4.828651] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
    [ 4.830784] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 4.839857] sdc: sdc1
    [ 4.843514] sd 6:0:0:0: [sdc] Attached SCSI removable disk
    [ 4.894625] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4.902120] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
    [ 4.937012] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4.944514] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
    [ 4.978524] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
    [ 5.038118] r8169 0000:03:00.0 enp3s0: link down
    [ 5.038174] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    [ 5.376682] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 631163
    [ 5.470179] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
    [ 5.851763] wlo1: authenticate with 04:a1:51:18:3f:5a
    [ 5.865752] wlo1: send auth to 04:a1:51:18:3f:5a (try 1/3)
    [ 5.868512] wlo1: authenticated
    [ 5.869715] wlo1: associate with 04:a1:51:18:3f:5a (try 1/3)
    [ 5.873551] wlo1: RX AssocResp from 04:a1:51:18:3f:5a (capab=0x411 status=0 aid=2)
    [ 5.876272] wlo1: associated
    [ 5.876327] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
    [ 38.341494] fuse init (API version 7.22)
    Xorg.0.log
    [ 20.932]
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 20.932] X Protocol Version 11, Revision 0
    [ 20.932] Build Operating System: Linux 3.12.6-1-ARCH x86_64
    [ 20.932] Current Operating System: Linux HP-DV7 3.12.8-1-ARCH #1 SMP PREEMPT Thu Jan 16 09:16:34 CET 2014 x86_64
    [ 20.932] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 rw
    [ 20.932] Build Date: 08 January 2014 01:35:51PM
    [ 20.932]
    [ 20.932] Current version of pixman: 0.32.4
    [ 20.932] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 20.932] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 20.932] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 25 01:16:07 2014
    [ 20.935] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 20.938] (==) No Layout section. Using the first Screen section.
    [ 20.938] (==) No screen section available. Using defaults.
    [ 20.938] (**) |-->Screen "Default Screen Section" (0)
    [ 20.938] (**) | |-->Monitor "<default monitor>"
    [ 20.938] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 20.938] (**) | |-->Device "Intel Graphics"
    [ 20.938] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 20.938] (==) Automatically adding devices
    [ 20.938] (==) Automatically enabling devices
    [ 20.938] (==) Automatically adding GPU devices
    [ 20.947] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 20.947] (**) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
    [ 20.947] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 20.947] (II) Loader magic: 0x7fac20
    [ 20.947] (II) Module ABI versions:
    [ 20.947] X.Org ANSI C Emulation: 0.4
    [ 20.947] X.Org Video Driver: 14.1
    [ 20.947] X.Org XInput driver : 19.1
    [ 20.947] X.Org Server Extension : 7.0
    [ 20.947] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 20.948] (--) PCI:*(0:0:2:0) 8086:0046:103c:144b rev 2, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00005050/8
    [ 20.949] (--) PCI: (0:1:0:0) 1002:68c1:103c:144b rev 0, Mem @ 0xa0000000/268435456, 0xc4400000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
    [ 20.949] Initializing built-in extension Generic Event Extension
    [ 20.949] Initializing built-in extension SHAPE
    [ 20.949] Initializing built-in extension MIT-SHM
    [ 20.949] Initializing built-in extension XInputExtension
    [ 20.949] Initializing built-in extension XTEST
    [ 20.949] Initializing built-in extension BIG-REQUESTS
    [ 20.949] Initializing built-in extension SYNC
    [ 20.949] Initializing built-in extension XKEYBOARD
    [ 20.949] Initializing built-in extension XC-MISC
    [ 20.949] Initializing built-in extension SECURITY
    [ 20.949] Initializing built-in extension XINERAMA
    [ 20.949] Initializing built-in extension XFIXES
    [ 20.949] Initializing built-in extension RENDER
    [ 20.949] Initializing built-in extension RANDR
    [ 20.949] Initializing built-in extension COMPOSITE
    [ 20.949] Initializing built-in extension DAMAGE
    [ 20.949] Initializing built-in extension MIT-SCREEN-SAVER
    [ 20.950] Initializing built-in extension DOUBLE-BUFFER
    [ 20.950] Initializing built-in extension RECORD
    [ 20.950] Initializing built-in extension DPMS
    [ 20.950] Initializing built-in extension X-Resource
    [ 20.950] Initializing built-in extension XVideo
    [ 20.950] Initializing built-in extension XVideo-MotionCompensation
    [ 20.950] Initializing built-in extension XFree86-VidModeExtension
    [ 20.950] Initializing built-in extension XFree86-DGA
    [ 20.950] Initializing built-in extension XFree86-DRI
    [ 20.950] Initializing built-in extension DRI2
    [ 20.950] (II) LoadModule: "glx"
    [ 20.951] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
    [ 20.954] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 20.954] compiled for 6.9.0, module version = 1.0.0
    [ 20.954] Loading extension GLX
    [ 20.954] (II) LoadModule: "intel"
    [ 20.955] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 20.959] (II) Module intel: vendor="X.Org Foundation"
    [ 20.959] compiled for 1.14.2, module version = 2.21.15
    [ 20.959] Module class: X.Org Video Driver
    [ 20.959] ABI class: X.Org Video Driver, version 14.1
    [ 20.959] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
    HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
    HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
    HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
    HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
    [ 20.960] (++) using VT number 1
    [ 20.963] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 20.963] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 20.963] (==) intel(0): RGB weight 888
    [ 20.963] (==) intel(0): Default visual is TrueColor
    [ 20.963] (**) intel(0): Option "AccelMethod" "sna"
    [ 20.964] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
    [ 20.964] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
    [ 20.964] (**) intel(0): Framebuffer tiled
    [ 20.964] (**) intel(0): Pixmaps tiled
    [ 20.964] (**) intel(0): "Tear free" disabled
    [ 20.964] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 20.964] (II) intel(0): Output LVDS1 has no monitor section
    [ 20.965] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
    [ 20.965] (II) intel(0): Output VGA1 has no monitor section
    [ 20.965] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
    [ 20.965] (==) intel(0): DPI set to (96, 96)
    [ 20.965] (II) Loading sub module "dri2"
    [ 20.965] (II) LoadModule: "dri2"
    [ 20.965] (II) Module "dri2" already built-in
    [ 20.965] (==) Depth 24 pixmap format is 32 bpp
    [ 20.969] (II) intel(0): SNA initialized with Ironlake (gen5) backend
    [ 20.969] (==) intel(0): Backing store disabled
    [ 20.969] (==) intel(0): Silken mouse enabled
    [ 20.969] (II) intel(0): HW Cursor enabled
    [ 20.969] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 20.972] (==) intel(0): DPMS enabled
    [ 20.972] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 20.972] (II) intel(0): [DRI2] Setup complete
    [ 20.972] (II) intel(0): [DRI2] DRI driver: i965
    [ 20.972] (II) intel(0): direct rendering: DRI2 Enabled
    [ 20.972] (==) intel(0): hotplug detection: "enabled"
    [ 20.972] (--) RandR disabled
    [ 20.984] (EE) GLX error: Can not get required symbols.
    [ 20.996] (II) intel(0): switch to mode [email protected] on pipe 0 using LVDS1, position (0, 0), rotation normal
    [ 21.006] (II) intel(0): Setting screen physical size to 423 x 238
    [ 21.139] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 21.139] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 21.139] (II) LoadModule: "evdev"
    [ 21.140] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 21.141] (II) Module evdev: vendor="X.Org Foundation"
    [ 21.141] compiled for 1.14.3, module version = 2.8.2
    [ 21.141] Module class: X.Org XInput Driver
    [ 21.141] ABI class: X.Org XInput driver, version 19.1
    [ 21.141] (II) Using input driver 'evdev' for 'Power Button'
    [ 21.141] (**) Po

  • MSi GE70 Apache Pro w/ nVidia GeForce GTX 860M Graphics Issues

    Hi there,
    I recently purchased an MSi gaming notebook with nVidia GTX 860M graphics. However, just recently I've been having game-breaking issues with textures rendering, artifacts and particles as well as the drivers crashing now and again(desktop flashing and flickering).
    I've only had this laptop for just over two months and am quite disappointed with issues coming up already.
    To get to the specifics; I have recently been playing through the Mass Effect trilogy and, just the other day, started up a file in Skyrim. The following screenshots show my biggest issues aside from the obviously serious driver crashing issues. I believe the issues started maybe a month into owning this laptop and since it has been getting progressively worse. I feel as though I have been all over the internet trying to find a fix to this, I've tried everything suggested, everything that I could think of, and I am just about ready to have it sent back. I was hoping someone may have some other options before I do send it in.
    https://www.dropbox.com/s/d8koa8f8i1z9j3d/Photo%202014-09-30%2C%201%2040%2044%20AM.jpg?dl=0
    On the title screen for Mass Effect 3 I get these consistent blue and red glowing orbs, they also occur on several other maps within gameplay.
    https://www.dropbox.com/s/a9c47w320u5xylb/Photo%202014-09-30%2C%201%2043%2016%20AM.jpg?dl=0
    Once I get in-game, this occurs everywhere. Textures "expanding" off of characters into random points.
    https://www.dropbox.com/s/v37un4vespalosx/Photo%202014-09-30%2C%201%2045%2036%20AM.jpg?dl=0
    This happens occassionally on characters; ridiculously shadowed faces to the point where they are barely recognisable.
    https://www.dropbox.com/s/8cebgs4t10ghnh0/Photo%202014-09-30%2C%201%2046%2020%20AM.jpg?dl=0
    On almost all wall textures there are white glowing particles like the ones behind the character here. In extreme cases, the wall becomes a texture of textures. All of the textures in the game are miniaturized into a wall of textures on certain objects.
    I've also had signs and the game's menus and interface stretched and skewed all over the place. If I continue to play it with the above issues, the game eventually hangs and I have to alt+tab out and back in, or close it using the task manager. All of these issues also occur in Skyrim and any game using the same, or similar, engines. The only game I have been able to play almost seamlessly without any issues is Ragnarok Online 2, an online MMORPG.
    I have tried the following:
    nVidia's GeForce Control Panel: any and all combination of options.
    Re-installing video drivers.
    Re-installing DirectX and PhysX.
    Formatting and a fresh install of Windows and all games and drivers.
    Any other troubleshooting other forums have provided.
    Removing the pagefile for virtual memory limits.
    Using Intel HD graphics to test for other issues.
    PC/nVidia power settings.
    The one time I thought it may be fixed, all it took was me plugging in my laptop to cause the issues all over again. I've tried downloading MSi Afterburner to check GPU temperatures and I rarely even go over 65~70. I'm absolutely out of ideas. It was suggested to me by a family member that it may be a hardware issue, hence the consideration for sending it in.
    I'm running Windows 7 64-bit
    nVidia GeForce GTX 860M
    Intel Core i7-4710HQ CPU @ 2.50GHz
    12GB of RAM
    Any ideas/help would be greatly appreciated. I would really rather not have to send it back. I've also posted this over at the nVidia forums because I'm -hoping- it's a software issue.
    Thanks in advance!

    Quote
    It was suggested to me by a family member that it may be a hardware issue, hence the consideration for sending it in.
    Quote
    To me it sounds like a hardware issue (especially if you have rolled back to factory default and reinstalled from scratch)
    It wouldn't be a hardware issue since you can play other games without problem.
    Easiest way to tell if it's a hardware issue or not is to run the benchmark tool for example 3DMark 11 and see if the problem also happens during the benchmark.
    For the rendering problem you were talking, please provide not only the problem picture but also the picture without problem to let us make the comparison.
    I'm sorry to say, but some of the picture I'm not really getting what the problem you're talking about.
    For the shadow face, here are few user provided fix which might be helpful.
    http://forums.steampowered.com/forums/showthread.php?t=2282965
    http://forum.bioware.com/topic/55984-shadows-way-too-darkblack-intendedscreenshot-solved/
    Quote
    Re-installing DirectX and PhysX.
    NVIDIA moderator says some of the games is required to play some older Physx games, but not sure if it works.
    If you would like to have a try.
    https://forums.geforce.com/default/topic/524066/geforce-drivers/official-nvidia-r310-61-beta-display-driver-feedback-thread-released-11-20-12-/post/3714758/#3714758
    I'd suggest to post the issue on EA, steam or obioware and see if there are people looking into it.

  • Graphics issues with MacBook Pro 15-inch Late 2011 model

    I have a MB Pro 15-inch late 2011 (2.4GHz Core i7) and recently I started to get random screen glitches while working on photoshop and illustrator and then eventually the screen went totally blank and so I paid to have the graphics chip replaced (as I was out of warranty).
    After 2 weeks, the same glitches have started again so I did some internet research and discovered that that there are thousands of other people around the world who had similar issues in this particular model range that uses the AMD Graphics chipset (Radeon HD 6770M) combined with the Intel HD Graphics 3000 on the same motherboard.
    Does anyone know if Apple has announced a recall / replacement programme for this model as it appears to be a widespread issue ?
    Thanks
    Rohit

    There is an online campaign at change.org which has crossed 10,000 signatories (or is about to) that should prove that there is an issue.
    From my analysis, the problem is the AMC Radeon GPU that is the problem - there is some compatibility issue with the logic board. I just paid to get the problem solved, but it has come back again in less than a a week. I installed gfcCardStatus to control which graphics chips are being used and found that when the Intel HD chipset is used, there is no issue, but when it switches to the AMD chipset, the problem returns.
    There is certainly an issue and it's widespread and I am sure that this will come back to bite apple in the ***...
    I think their issue is probably that the fault lies in AMD's chips and not their circuitry which is probably why they don't want to bear the cost of a recall program unless AMD contribute to the costs...which they won't because Apple have pretty much stopped using AMD GPUs and use nVidia instead now.
    Anyway, I'm going to go back to the repair folks and have them re-fix the issue as it's covered by their warranty. Let me know if you have any more luck on your end.

  • Finder: graphic issues while in icon view

    Hi there,
    my Macbook Pro becomes more and more sluggish since i upgraded to Yosemite. Worst thing i noticed is icon view in Finder. It does not show up correctly and has some weird graphic issues. I made a video while using the guest account: http://www.youtube.com/watch?v=jo5JUnmK6n4&feature=youtu.be
    Any idea?
    Thank you!
    MacBook Pro (Retina, 13', Mitte 2014), 2,8 GHz Intel Core i5, 16 GB 1600 MHz DDR3, Intel Iris 1536 MB

    We were discussing this issue on this thread: Re: Anybody else getting black bars on Finder items names?
    This graphic issue only appears in icon view as you have stated. The workaround was to put everything in list view.
    I have been testing for the last week or so, with Icon view after deleting the com.apple.finder.plist. So far it's a lot better.
    My MBP [Late 2013] was a dog after the Yosemite upgrade.
    I ended up doing a SMC and PRAM reset, my performance is almost back to normal but not as good as when on Mavericks 10.9.5.
    I hope Apple releases update 10.10.1 soon.
    Anyway, hope this helps.
    Paul K

  • Windows 8 and Boot Camp 5 with Mid-2011 iMac12,2 DISABLING INTEL HD GRAPHICS

    There seems to be some issue with this newer Boot Camp 5 and Windows 8 becuase of the Intel HD graphics in the processor. I have a maxed out Intel iMac 27" Mid-2011 with Intel Core i7 and AMD Radeon 6970M 2GB.
    When Windows 8 Pro is first installed with Boot Camp 5 USB flash drive everything seems fine. The Intel HD graphics are detected and so is the AMD Radeon. But if the machine is put to sleep the computer resumes and has a BSOD. The reason is igdkmd64.sys.
    I think the only way I know of to solve this is to disable the Intel HD graphics in Device Manager before the machine begins crashing. On "first" boot the Intel HD graphics are listed in device manager. Later depending on restart, sleep, hibernate, the Intel HD graphics are listed under hidden devices in Device Manager.
    IS ANYONE ELSE EXPERIENCING THIS?
    DOES ANYONE ELSE HAVE A SOLUTION BESIDES THIS?

    I don't know if it's just my iMac that lists the Intel HD graphics, but one day it showed up in Windows 7 and still exists today in Windows 8. Could somebody see if theirs shows up in Windows in Device Manager? Maybe with Show Hidden Devices checked.
    BTW I did a clean install and left the boot camp usb flash drive inserted during the install which automatically installs intel hd and bluetooth and then start boot camp drivers installs after Windows setup is completed.

  • Is it possible to crossfire intel HD graphics with amd radeon?

    Hi,
    I installed Win 8.1 on my Lenovo G510, after installing drivers i noticed that there are 2 graphic cards in the "Device Manager" (see below). I want to know is it possible to crossfire these 2 cards, if yes, how? And if no, do I need to uninstall my intel HD driver?
    Also, I seem to be unable to find drivers for 3.0 USB that are compatible with Win 8.1, so if you can help me with that, it would be awsome
    Best regards,
    epits

    Hello zaiplanet
    As I understand it you need your graphics drivers for your HP ENVY Ultrabook 4 - 1114tx. I am linking you here to your drivers for Windows 8 64-bit. I would suggest that you start with the Chipset drivers and ensure that ALL the drivers and software is up to date.
    I hope this helps resolve your Switchable Graphics issue. Thank you for posting your issue on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Maybe you are looking for

  • XI Add on

    Hi, I am doing a PROXY ->XI-> FILE scenario and we are having problems getting SPROXY to work. My question is we are on ECC 5.0 and PI 7.0, so I assume the WEB AS to 6.40 or greater , is there a need to install the XI ADD ON? If so where can I find i

  • Syncing images between iPhone and PS Elements/Organizer

    I just installed PS Elements 13 and wanted to import my iPhone images.  I set up Revel app but when I am in PS Elements/Organizer, it doesn't show the images that were uploaded to the cloud. Is there a step I am not completing?

  • How can i LPAD and/or RPAD this query in sql

    Hi, I have a column in a table with value 'True Wheel '. I want the result in the following format: 'True*Wheel*****' i.e I want to pad '*' on the right as well as at the centre of the two words. Is it possible ? Please help !

  • Emailed Purchase Orders not appearing in SCOT

    Hi, I am trying to view the emailed output of Purchase Orders (via Shopping Cart approvals) to vendors , in our test system. Because it is out test system, and we do not want purchase orders sent to vendors from this system, we have turned the SMTP (

  • My ipod shuffle won't connet at all?

    my shuffle blinks green once and then it does not do anything it doesn't connet to either my pc or itunes it's dead, i use it with windows xp. i tried it on another pc an it's the same, i think its broken. if anyone has had this problem i would appre