T410s Problem when disconnecting from second monitor

I don't know if this is a Windows 7 problem or something I've set up wrong. I've been searching the web for about an hour now and haven't found the answer. My apologies if it's either very basic knowledge or something that's been answered before.
I have a docking station and two monitors at work. If I have a window open on the right (secondary) monitor and disconnnect my laptop to go to a meeting and I haven't dragged that window back to the left (primary) monitor, when I open the lid at the meeting, I can't raise that window.
This often happens to me with Firefox, whether I had quit Firefox or still had it running, so I thought it was a Firefox problem, but yesterday it happened to another application. I found that other people are having that problem, too.
Is there a way to prevent this? If not, what do you do when you open your laptop and find that the application is starting in a monitor that isn't there?

Welcome to the forum!
A workaround would be to use the Alt+Tab to bring the application in front of the others and then use the Windows+Up Arrow to maximize the window, or Shift+Windows+Left/Right Arrow to move it to the left or right monitor, depending on the relative previous position of the external monitor.
You can find a list of useful win 7 keyboard shortcuts here. I don't think you're doing something wrong, this behavior is a Windows "feature".
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Similar Messages

Remove menu bar from second monitor maverick

Hi, Can i Remove menu bar from second monitor maverick ?
Thanks

Apple has sort of screwed up the whole full-screen / multi-screen features of OSX. I get it's hard to achive it all in a "perfect way" for everyone but the so called "improved" multi-screen features of 10.9 add a number of issue on top of the "fixes".
1. Switching between apps with CMD + TAB is bugged with using 10.9 screen-setup. The OS doesn't understand what screen I'm using and the CMD + TAB feature shows up on screen 1 or screen 2. The only way I've found to controll this is by activating the DOCK on either screen which is a very bad solution.
2. Spotlight searching always follows the "active" screen. At least 10.9 understands what screen is my active one but in this case I never ever want screen 2 to have Spotlight on it. Very irriting.
3. Remembering application positions. If I open an app from the dock on screen 1, place it on screen 2 close it and again open it from the dock on screen 1 the app will open on screen 1 and not screen 2. Some apps will remember certain windows on the correct display. A solution is to open the app from the dock on the display you want it on. Very irritiating.
4. Swiching between apps is also bugged. Concider I have mail on screen 2 and a new mail window on screen 1. I CMD + TAB to Safari on screen 2 after starting to write the new mail on screen 1. No problems here. If I now howvever CMD + TAB back to mail, the last active window (new mail window on screen 1) won't be active. Very irritating.
As noted above, going back to what we had in 10.7 and 10.8 solves these issues but doesn't solve Apples horrible fullscreen app issues. I'd go as far as saying Apple hasn't really fixed anything in 10.9 - only cause more issues and confusing behavoir. Fullscreen apps are often very lacking in funktion, having safari or mail fullscreen renders them on a large screen very very limited compared to "maximized". It's also very confusion that you are required to travel between virtual desktops to use full-screen apps. I personally would prefer the option of "layered fullscreen apps". For example VLC allows me to work this way.

Windows 8.1 account limit problem when downloading from store

windows 8.1 account limit problem when downloading from store
I have 250 windows 8.1 tablets.
I figured since you can use the same account on 81 devices id create 4 accounts.
I need to download more than 25 free apps from the store
on each tablet. Putting the same account don't work. (comes up with an error after putting on to many devices that you cant use this account now).
Whats the best way to do this ? and what if I need to download a paid app ?
Thank You.

Hi,
As far as I know, One Microsoft Account may bound at most five Trusted computers. There is no way to break this limitation.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

WebStart Fails to load cached app when disconnected from internet under Apple OS-X

Java WebStart broken under OS-X
Our Java WebStart application fails to re-launch when disconnected from the internet.
Instructions:
Running OS-X 10.8 or 10.9 with internet connected.
Launch a WebStart application (e.g.. from http://www.dsuk.biz/Downloads/SmartType/SmartType2.0.19/APPLICATION.JNLP)
Disconnect from internet.
Relaunch the application either with the downloaded JNLP file or the installed desktop shortcut.
I get "Unable to launch application" error with following exception:
java.net.UnknownHostException: www.dsuk.biz
at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:184)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:392)
at java.net.Socket.connect(Socket.java:589)
at java.net.Socket.connect(Socket.java:538)
at sun.net.NetworkClient.doConnect(NetworkClient.java:180)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:432)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:527)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:211)
at sun.net.www.http.HttpClient.New(HttpClient.java:308)
at sun.net.www.http.HttpClient.New(HttpClient.java:326)
at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:1167)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect0(HttpURLConnection.java:1103)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:997)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:931)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream0(HttpURLConnection.java:1511)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1439)
at com.sun.deploy.net.HttpUtils.followRedirects(Unknown Source)
at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
at com.sun.deploy.net.BasicHttpRequest.doGetRequestEX(Unknown Source)
at com.sun.deploy.cache.ResourceProviderImpl.checkUpdateAvailable(Unknown Source)
at com.sun.deploy.cache.ResourceProviderImpl.isUpdateAvailable(Unknown Source)
at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.launch(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main.access$000(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Thread.java:744)
I have reproduced with Java build 1.8.0-b132 and 1.7.0_51
Java Web Start 11.0.2.132
Using JRE version 1.8.0-b132 Java HotSpot(TM) 64-Bit Server VM
Re launching the application under Windows 7 when disconnected from the internet seems to work fine (tested in virtual Windows 7 64 bit VM under Parallels). It used to work fine on OS-X!
RANT/QUESTION
WebStart over the last two years has given me no end of headaches with deployed applications mysteriously breaking when either Oracle or Apple have made changes. So far WebStart just has not been a reliable and robust means of deployment.
Is WebStart to be taken seriously as a deployment vehicle for a commercial application or should I be looking at other solutions?
Also: How do I report bug to Oracle? Do you have to pay for support in order to report bugs?

Java WebStart broken under OS-X
Our Java WebStart application fails to re-launch when disconnected from the internet.
Instructions:
Running OS-X 10.8 or 10.9 with internet connected.
Launch a WebStart application (e.g.. from http://www.dsuk.biz/Downloads/SmartType/SmartType2.0.19/APPLICATION.JNLP)
Disconnect from internet.
Relaunch the application either with the downloaded JNLP file or the installed desktop shortcut.
I get "Unable to launch application" error with following exception:
java.net.UnknownHostException: www.dsuk.biz
at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:184)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:392)
at java.net.Socket.connect(Socket.java:589)
at java.net.Socket.connect(Socket.java:538)
at sun.net.NetworkClient.doConnect(NetworkClient.java:180)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:432)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:527)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:211)
at sun.net.www.http.HttpClient.New(HttpClient.java:308)
at sun.net.www.http.HttpClient.New(HttpClient.java:326)
at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:1167)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect0(HttpURLConnection.java:1103)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:997)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:931)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream0(HttpURLConnection.java:1511)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1439)
at com.sun.deploy.net.HttpUtils.followRedirects(Unknown Source)
at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
at com.sun.deploy.net.BasicHttpRequest.doGetRequestEX(Unknown Source)
at com.sun.deploy.cache.ResourceProviderImpl.checkUpdateAvailable(Unknown Source)
at com.sun.deploy.cache.ResourceProviderImpl.isUpdateAvailable(Unknown Source)
at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.launch(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main.access$000(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Thread.java:744)
I have reproduced with Java build 1.8.0-b132 and 1.7.0_51
Java Web Start 11.0.2.132
Using JRE version 1.8.0-b132 Java HotSpot(TM) 64-Bit Server VM
Re launching the application under Windows 7 when disconnected from the internet seems to work fine (tested in virtual Windows 7 64 bit VM under Parallels). It used to work fine on OS-X!
RANT/QUESTION
WebStart over the last two years has given me no end of headaches with deployed applications mysteriously breaking when either Oracle or Apple have made changes. So far WebStart just has not been a reliable and robust means of deployment.
Is WebStart to be taken seriously as a deployment vehicle for a commercial application or should I be looking at other solutions?
Also: How do I report bug to Oracle? Do you have to pay for support in order to report bugs?

Problems when waking from long sleep periods

Suddenly this morning my iMac developed a problem when recovering from a long period of sleep. I'm having trouble finding a solution.
I have my iMac set to ask for password when it recovers from sleep or screen saver. When I woke my iMac this morning the password dialog box appeared at the top of the screen as a garbled mess. If I put my iMac back to sleep and then wake it again it usually solves the problem.
I don't want to turn password verification off. Has anyone seen this problem before? Any suggestions on what might be cause?

funkyblue:
I usually leave my Pismo on and allow it to sleep. I find that waking from sleep and general functioning of the computer works a lot better if from time to time (I do it at least weekly) I shut down the computer, start up in Safe Mode, log in, empty Trash and reboot normally. The emptying Trash part clears the font caches.
You should consider doing other maintenance procedures, if you don't already. Gulliver's Mac OS X System Maintenance has good ideas with linked resources.
Please do not hesitate to post back with further questions or comments.
Good luck.
cornelius

Problem when waking from sleep

Hi all, my mbp has real problems when waking from sleep - I hear the dvd drive do something, the screen comes on but remains black, and then nothing else - no keys work, only holding the power button has any effect.
I have a screensaver password on.
Anyone heard of this before or have any ideas?
Thanks!

It might also be worth trying the following:
Reset PRAM and NVRAM: http://support.apple.com/kb/HT1379
Reset SMC: http://support.apple.com/kb/HT1411

Encountered problem when converting from development to runtime environment

1. I ran apxdevrm.sql switch my environment to runtime. Although it seemed to finish successfully, this error was in the log and according to registry, my installation was invalidated(still works though).
drop package wwv_flow_create_flow_api (doesn't seem to exist)
ERROR at line 1:
ORA-04043: object WWV_FLOW_CREATE_FLOW_API does not exist
Entry in dba_registry:
COMP_NAME--Oracle Application ExpressSTATUS
STATUS--INVALID
2. Next, not sure if it had made the switch, I then ran apxdvins,sql to revert back because of problem #1. (later found out that it was still devl environment)
This time, this message appeared in log...
FAILED CHECK FOR TRIGGER BIN$UH58A027El3gRAADutXi8w==$0
(Installation still invalid)
Any ideas?

1. Commented "drop package" stmt out on apexdevrm.sql to get rid of non-existent package problem. (probably holdover from v3.0)
2. purged dba_recyclebin to get rid of problem #2.
Dba_registry entry still shows as INVALID... Has anyone else encountered these problems when switching from dev to runtime? (or vice-versa)

Cannot start WAS when disconnected from the network

Hi, I have recently installed NW2004s (Developer Workplace) on my laptop, 1.5 G RAM, Windows xp. The WAS will not start when I am disconnected from the network b/c it is looking for the
<host>
sapmnt
.... folder. I want to be able to run the WAS when disconnected from the network. I'd like to change this setting to point to the local usr/sap/... drive. I found the properties file in the bootstrap component where you can change it, but can't find it in the dispatcher or server. The logs are showing the following:
#1.5#000F1FCD2E4900000000001200001EA800040E5C5AD7E178#1141689730714#com.sap.engine.core.configuration##com.sap.engine.core.configuration#######Thread[Thread-1,5,main]##0#0#Error#1#/System/Server#Plain###Error occurred: Secure Store lib Dir does not exist
<host>
sapmnt
J2E
SYS
global
security
lib
engine
=======================================================
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred: Secure Store lib Dir does not exist
<host>
sapmnt
J2E
SYS
global
security
lib
engine
     at com.sap.engine.core.configuration.impl0.ConfigurationManagerImpl.initInternal(ConfigurationManagerImpl.java:138)
     at com.sap.engine.core.configuration.AbstractConfigurationManagerImpl.init(AbstractConfigurationManagerImpl.java:169)
     at com.sap.engine.core.Framework.loadSingleManager(Framework.java:476)
     at com.sap.engine.core.Framework.loadManagers(Framework.java:246)
     at com.sap.engine.core.Framework.start(Framework.java:180)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.boot.FrameThread.run(FrameThread.java:58)
     at java.lang.Thread.run(Thread.java:534)
Anybody know where this
<host>
sapmnt
... path is set?
Thanks in advance!!

Hi David,
did you try to run the WAS, using the Ms Loopback Adapter?
Regards
Gregor

My apple Tv has audio problems when streaming from my NAS server.

My Apple TV has audio problems when streaming from my NAS server or computer and even internet. I can hear the click sound it makes when you click on the icons, but when the movie starts there is no audio. This even happens when using XBMC. I have HMDI directly to my TV suing Apple TV 2. I have tried resetting, turning off both TV and Apple TV, and changing the HDMI cable. It is driving me nuts.

XMBC requires a hack, we cannot help with hacked devices.

I have a problem when buying from within the game

I have a problem when buying from within the game
i used visa..

All games? Settings > General > Restrictions has an option to prevent In-App Purchases. Is that on?

Display issues when disconnecting from an external display

While I have found 3 bugs since my upgrade to 10.6 the biggest and most frequent issue is the MBP display when using and external monitor. When I connect a monitor all is well (mirroring mode). When I disconnect the MBP screen gets the major jitters and I can't stop it by doing anything in the Display Properties. The only way to resolve it to close the lid forcing the system into suspend mode. When I reopen all is well again. This is not an intermittent issue. Has anyone found this issue and is there a better work around?
The only other issues have been Mail crashing the whole system and Gotomeeting crashing the whole system when attempting to take Keynote into full screen mode.

I am have experienced both problems as well as if I have an external display connected to my MBP and move itunes video play back to the second screen then disconnect it from the MBP the video stays on the second display and will not gather back to the MBP display. The video is playing but off screen. Gather and detect screen do not work to get the video play back to the MBP screen.
When I reconnect the external display there is the video. I know this does not answer the original question, but from looking around the net it seems to be a growing issue.
Message was edited by: Black Spruce

PDFs not displaying properly when switching from multiple monitors to single screen

OK, here’s one I can’t find online anywhere. When I am at home I use a second monitor on my Macbook. Adobe reader works just fine opening files and displaying them, but if I disconnect the monitor and just go to the single laptop screen, adobe will no longer display the pdf file. Reader stays open and will display the toolbar from the file or files I had open, but it won’t display the actual documents. I have to quit reader and re-open it in order to display my files correctly.
Any ideas?

OK, here’s one I can’t find online anywhere. When I am at home I use a second monitor on my Macbook. Adobe reader works just fine opening files and displaying them, but if I disconnect the monitor and just go to the single laptop screen, adobe will no longer display the pdf file. Reader stays open and will display the toolbar from the file or files I had open, but it won’t display the actual documents. I have to quit reader and re-open it in order to display my files correctly.
Any ideas?

Application has problems when migrated from 10g to 11g

Hi there,
I am hoping someone can shed some light on a problem I have in moving an application from Oracle 10g to Oracle 11g. The app works fine on 10g (uses Apache webserver with PL/SQL module, and APEX 3.1.2.00.2), but on 11g using the embedded web server and APEX 3.2.0.00.27, it doesnt. Most of the app works fine, but there are a couple of pages that provide the ability to add child rows to a parent/child relationship, where the parameter passing mechanism from one page to the next appears to suffer from some sort of corruption. I have traced this using the "session" and "debug" buttons on the developer interface, which show that the values of the parameters get changed inexplicably, when branching from one page to the next - even when the page is actually branching to itself.
I am using the "Set these items, "With these values" fields in the branch, and have verified that the correct values are being associated with the correct items in the application builder. But while this does work correctly under 10g, with 11g, the wrong values end up being passed. Just prior to the branch the set of parameters have the correct values, but immediately after the branch, one of the values is NULL, another has the value of a different item, and a third has a totally random value - I have no idea were it comes from!
I migrated the application from 10g to 11g using the APEX application developer's Export/Import options. There have been no other changes. Should this have worked? If so, any ideas what might have gone wrong?
Thanks,
Sid.

Well, I managed to solve this, but not in a way that makes much sense.
In desperation (I had tried almost everything else!) I changed the value of "Cached" in the page settings from "No" to "Yes", and ran the app, but the page didnt render correctly (in either Firefox or IE7) - in fact all that displayed was the developers toolbar at the bottom of the page. I changed the value of "Cached" back to "Y", ran the app again, and hey presto - everything worked fine! I actually did this a second time with a fresh import of the app from 10g, just to be sure I wasnt seeing things. I wasnt!
There was just one further issue - everything worked fine apart from this section of code in a page process:-
ELSIF (:p9_filter_type = 5) THEN
IF (:p9_x_gene_list IS NOT NULL) THEN
:p9_filter := :p9_x_gene_list;
END IF;
:p9_entity_types := 'GENE';
END IF;
In 11g the value of :p9_entity_types was not being set to 'GENE' when :p9_filter_type was 5. This was (and still is) working in 10g. I changed the code as follows:-
ELSIF (:p9_filter_type = 5) THEN
:p9_entity_types := 'GENE';
IF (:p9_x_gene_list IS NOT NULL) THEN
:p9_filter := :p9_x_gene_list;
END IF;
END IF;
... and now it works fine in 11g as well.
Only wish I knew why!

Lose Dock when switching from External monitor

When I disconnect my external monitor and open my MacBook monitor the Dock is not visible except when I cursor over the Dock area it's starts to reappear? It's very strange.

I think the problem revolves around the change of resolution when switching back. Because my Windows for Safari are out of whack too. So I am thinking the Dock is position wrong at first.

Problem when loading from ODS to the CUBE

Hi Experts,
I am facing an unusual problem when loading data from ODS to the cube.
I have a first level ODS where the delta postings are updated. I have checked the active table of the ODS and the data is accurate.
I have deleted the entire data from the Cube and trying to do a full load from ODS to the CUBE.
I am sure when I run a full load the data goes from Active table of the ODS.
After the full load the the keyfigure values are 0. I have tried doing the testing by loading couple of sales documents and still the keyfigure values are 0.
I wonder when I load the full. The data should be picked exactly the way it is in active table of the ODS.
I also dont have any fancy routines in the update rules.
Please help me in this regard.
Regards
Raghu

Hi,
Check the procedure did u do that exactly or not. just follow the the laymen steps here:... and let me know ur issue
o     First prepare a flat file in Microsoft excel sheet for master data and transaction data and save it in .CSV format and close it.
o     First select info objects option and create info area then create info object catalog then char, & key figure. Then create id in Char, Name as attribute activate it then in key figures create no and activate it.
o     In info sources create application component then create info source with direct update for master data and flexible update for transaction data. The flat files would be created for master data create info package and execute it.
o     For transaction data go to info provider then select the file right click on it then select option create ODS object. Then a new screen opens give the name of the ODS and create other screen opens then drag character to key fields.
o     Activate it then update rules it will give error to it then go to communication structure and give 0Record mode then activate it then go to update rules it will activate it.
o     Then go to info source then create info package then external data then processing update, Data targets then the scheduling then click start then the monitor.
o     Then other screen opens there we can see if we doesnt able to see the records then come back to the info provider right click on it then other screen opens then select the option activate data in ODS then a screen opens.
o     so select the option QM where it would be in a yellow co lour then by double click then another screen opens then select green color option then click continue it and it comes to the previous screen then select the option and click save it would be underneath of it just click it up and close it.
o     Then come back to the main screen to the info source to the info package go to the package and right click on it then a screen opens then click schedule without distributing any of the tab directly click the monitor tab. Then refresh it until the records come to the green.
o     Once it is green the click the data target and see the file executed.
o     Now go to the info provider then a right click on the file name then create info cube. Then a new screen opens and gives the name and activates it. The drag the key figures to the other side, time characteristics to the other side, and chacetristics to the other side.
o     Then create the dimension table then assign it and activate it .Then go to file name right click on it then select the option create update rules select ODS option and give the file name and activate it .
o     Then come back to the main screen and refresh it. Whenever you see 8 file names you will know that it is undergoing the data mart concept.
o     In the main screen click ODS file right click then a pop up screen opens select the option update ODS data target. Then another screen opens in that we are able to see 2 options full update, initial update then select initial update.
o     Then another screen opens info Package there the external data , data targets , scheduler select the option later in background option then a another screen opens just click immediate then click save automatically it closes then click start option.
o     Then select monitor option then the contents then the field to be elected then the file to be executed.
regards
ashwin

T410s Problem when disconnecting from second monitor

Similar Messages

Maybe you are looking for