T410s - screen makes clunk noise at bottom right support

Hi
When I close the screen of my T410s there is a loud audible clunk sound from the bottom right support bracket.
It seems like the screen is a little loose at the bottom right support as there is "give" or movement at that joint.
Has anyone come across this before and can they advise how to get this fixed?
Thanks

more likely it is a hinge issue. Do you have warranty still?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

I just broke my ipad. I've taken really good care of it and had it since the third gen came out (bought it right away) the screen is cracked from the bottom right corner and im wondering if i can replace it for free or even at all please help :(

I've taken really good care of it and had it since the third gen came out (bought it right away) the screen is cracked from the bottom right corner and im wondering if i can replace it for free or even at all please help

You can replace it, but not for free.
iPad mini: $219
iPad 2 or earlier, iPad mini Retina display: $249
iPad 3rd generation or later: $299

Mi iPhone screen makes a noise?

My screen makes a noise next to the volume button when you press. The screen looks like to not be attached to the phone. It hasn't been drop. HELP

Its a iphone 5s

Clicking noise on bottom right of MacBook

Hello,
My MacBook has been making a clicking noise about every 20 seconds. The noise sounds like it is coming from the bottom-right of the computer. I am also hearing a very soft beeping noise. I just bought this computer 1 week ago. Should I take it to the Genius Bar?
Message was edited by: Sillyup

Well the bottom right hand side is where the hard drive is. Backup your data now!!! Then check Smart status of the hard drive. I would definitely make an appointment with a Genius as its still under warranty.

IPhone screen shows small light starburst bottom right corner

All of a sudden, there is a small starburst of white showing on the bottom right of my screen. I have not dropped or any type of problem with my phone. I have no clue as to why this could happen. Any help here would be appreciated.
Thanks

Hello Beemeupdeb
This might possibility hardware related. But would like to see you try some suggestions below just to see if it goes away.
1. Reboot iPhone
2. Shut iPhone off for about 20 min then turn it back on
If you find powering off the iPhone the starburst goes away. Wait 20 min then power it back on and see if the starburst is there.
Any chances your using a Magnetic case? with the iPhone. Or any chances you go through scanners or metal detectors daily at work? Just general questions seeing if maybe something on the outside may of all the sudden caused image quality starbursts.
I see you live in Lodi. So I doubt it was cold weather :P
But I do agree with the last poster. I would take it into an Apple Retail Store with appointment and get a tech to take a look at it.
I know we got one in Arden not sure what others are close to Lodi.

Clicking/ Rattling noise in bottom right side of comp

So i've had my mac for a few weeks now and I've noticed that theres a clicking/ rattling noise when i move my computer sometimes (pretty loud). Is this normal?

Me too. But it only does it if I move it while it is on. Back in the olden olden days we had to lock down our HD when we shut down. I wondered if this clunk is a motion detector which protects the HD while we move the computer around. Just a guess. I wonder where we can find out.

My page has moved to the right of the screen so I do not have a full centre page. How do I move the page back to the centre of the screen. There is no bottom scroll bar for me to move the page to the left of the screen. Hope this makes sense

The picture on my screen has moved over to the right hand side and I want it to be in the centre. How do I move it back as I do not have a scroll bar at the bottom of the page to do this and am unable to drag it back. Hope this makes sense!

Its a toolbar thing. I got rid of my Babylon toolbar and it sorted it out!

Hp officejet pro 8500a - Touch screen problem (bottom right-left side)

hi,
I have a problem with my printer since i changed the black cartridge. At the screen, it display a message with OK at the right/left side but when I touch the bottom right/left side of the printier touch screen, there is no reaction, can someone tell me what to do. Although, l can print from my computer but i can't make copies from the touch screen.
Bonjour,
J'ai un problème avec mon imprimante depuis que j'ai changé la cartouche d'encre noire. Sur l'écran tactile, je recois un message comme quoi la cartouche a bien été installée et avec 'OK' dans le coin inférieur droit de l'écran. J'ai beau appuyer sur la zone, le message reste à l'écran. Toutefois, je peux imprimer. Cependant, j'aimerais pouvoir copier en couleur des documents pour en faire des copies directement à partir de l'écran tactile. Pouvez-vous m'aider?

Hello DanTR,
I see that you are having an issue with the touchscreen on the printer.
When this issue happens it is typically a power related issue. Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I would also suggest that we run the HP Officejet Pro Firmware update.
Please feel free to write back if you have any other questions or concerns.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Will not boot - Black screen A2 code on bottom right.

mobo:Z97S SLI KRAIT EDITION
Samsung SSD - Windows and games are installed here
WD HDD - Everything else is put on this one.
Windows 7
I installed an ISO mounting program called Gizmo Central onto my HDD
After installation it said that it needed to restart. After it restarted I got a black screen with an A2 code. The screen will go completely black, and then it will back to the screen with the A2 code in the bottom right. It won't boot up BIOS, unless I do 1 of 2 things:
1. power off the pc, unplug the sata cable from the HDD, power pc back on, bios and windows will boot up. I can then turn the pc off, plug the sata cable back into the HDD, and it boots up fine into windows, but if I reboot again, it goes back to that black screen with the A2.
2. I have put in a disc into the dvd drive, and I do not get that screen. (I've been doing this as a workaround since it's much easier)
I have tried a number of things to resolve this, but none of them have restored my computer to it's perfect working order that it was previous to installing this program.
When I tried to uninstall that program it wasn't even on my installed programs list, so I deleted the folder it was in. This didn't resolve the issue.
I have wiped everything off of my HDD drive. This did not resolve the issue.
I have triple checked that my SSD is the first in the boot order. I even disabled the HDD from the HD boot order entirely. No change...
I updated my motherboard drivers. No change.
It's almost like for whatever reason my BIOS isn't listening to the boot order and doing my DVD drive, HDD, and then the SSD ever since I installed that Gizmo ISO mounting program.
I set the BIOS to factory default settings. That did not fix this issue.
I have use a windows system restore point from 2 days ago when it was working flawlessly. No change.
I'm thinking about reinstalling Windows, but logically it doesn't make sense to do that since the error happens even if I power off/on from BIOS with the HDD plugged in, so it I'm willing to venture that it's not Windows at fault here.
Also the computer used to boot up in like 8 seconds. It's still fast to boot up, but ever since this started to happen, it takes like 15-30 seconds for my usb mouse, and usb keyboard to register after windows starts up. It use to be immediate. My computer is so messed up right now, and I don't even know how it got like this or how to fix it. I'm pretty savvy and can follow directions well, so any help would be greatly appreciated.

Quote from: JLio01 on 29-April-15, 06:56:47
What intel USB driver version do you use? There's one more thing to try, try plug the kb/ms to USB 3.0 ports except the ones under the LAN port, and check if it happens again.
I'm glad you recommended checking Intel drivers. I typed appwiz.cpl to go to the installed programs list in windows. Found "intel USB 3.0 extensible host controller". I tried uninstalling this. It made my mouse and keyboard not work for about 1 minutes. Windows downloaded some drivers for my devices, and asked to reboot. I rebooted. Mouse/keyboard responded right away! Just incase it was a fluke I rebooted another 2 times, and each time the mouse and keyboard are immediately responsive. I'm SO glad that my PC is back to it's original working order. Thank you to you all for taking time out of your day to help me. I really appreciate it!

Noise every 13 seconds from the bottom-right speaker

Dear Apple Community Members,
I recently bought an iMac (27-inch, Late 2012) two weeks ago and I noticed last week a small noise coming from the bottom-right of the screen (every 13 seconds). As far as I know, that's also where one of the speakers is located. I tried to turn the speakers off, but that doesn't stop it. If you don't know it, you won't hear it. But once you heard it, it is getting really disturbing in a quiet environment because you will always pay attention to it.
Any idea what it could be and if I should send it back? If needed I can try to record the noises.
Looking forward to reading you.
Best,
J.

When I go into my email account through Safari, I cannot see all of my messages. 26 may show on the screen but it says I have 32. However, at the bottom right it appears as if all the messages are showing and the arrow to get more is not highlighted.

When I go to my email account through Safari, I cannot see all of my messages. It says there are 34 but I can only see 26. However, at the bottom right the arrows to go to the next screen are not highlighted? I also cannot scroll any further down. Does anyone know how to scroll down to see all of my messages? I use Travel-net Communications as my email provider (Ottawa, On, Canada).

hey ,
if it is showing you 34 mails them it is correct. when you see your mail. apple has a smart way of arranging your mail.suppose you recieve 4 mails from one email id it will show you under one highlighted mail. so when you open a mail from anyone trying scrolling it down and you will find your missing mails.

How do I view what slide I'm on out of how many I have total in keynote? I know on powerpoint it's at the bottom right of the window but I can't find it on keynote nor can I find the option to make it appear. Any help would be greatly appreciated.

How do I view what slide I'm on out of how many I have total in keynote? I know on powerpoint it's at the bottom right of the window but I can't find it on keynote, nor can I find the option to make it appear. Any help would be greatly appreciated.

Your steps so far are OK but you may want to try:
1 Trash your user library Caches folder (House Icon with short name in Finder window (hard drive window)GOTO:House icon > Library folder > caches folder
2 Trash the com.apple.Safari.plist file in User library > preferences folder > Safari.plist as well as removing the library Safari folder its self.
3 you can selectivly re-install Safari 2.0 from your OS Tiger Install disk 1, (see Knowledge base article 301229 for how to just select the Safari Application) without doing a complete system Archive and Install.
4. Create a new Test user account on the system and test how Safari responds in the Test user, see if its a user related issue and not system issue.
5. Still no Safari response? have to do an Archive and install (not preserving user and network settings)article 107120
PS. Issue may be related to actual internet connection connectivity, power cycle cable modem and router or airport if using one as well as the computer(keep unplugged for 3-5 min) and plug the cable modem in and then the router/airport then power on the computer. Do the Airport Admin utiliy (applications, utilities on HD_1)update.
- do a hard reset of airport knowledge base article 108044(Express base) and 107451 (Extreme base)
- Check with internet provider for connection issues "cannot find server" ect.

How do you get your ipod touch to make a noise when people text you and to pop up on the screen my friend did something to her ipod to do this but i dont know how please help!!!!!!!!!!!!!!!!!!!!!!!!!!! its like she updated it but i already tried it!!!!!!

how do you get your ipod touch to make a noise when people text you and to pop up on the screen my friend did something to her ipod to do this but i dont know how please help!!!!!!!!!!!!!!!!!!!!!!!!!!! its like she updated it but i already tried it!!!!!!i am very confused and want my ipod touch 4g like that please help thxns:)

Go to Settings>Notifications and turn alerts/sounds on for the app(s) in question. Not all apps have all options.

Issue in usability of Microsoft lumia 535 - Behavior of Key '- ' , on bottom right corner of home screen, is ambiguous.

Hi All,
I am new to this forum. And I may have incorrectly raised my concern here - over the usability aspect 'Microsoft lumia 535' mobile phone. Please help - to forward my concern to the correct forum in that case.
I faced issue in using the key '->' on bottom right corner of phone's home screen (scroll down on the home screen to use the key). Clicking the key '->' should ideally take to the screen to it's right where all the applications are listed. As per known
behavior of earlier phones of the lumia series like 630,525 etc.
However, the behavior is ambiguous, sometimes the click on '->' takes to its right screen, and sometimes it refreshes the home screen. And sometimes there is no impact of the click. The behavior is thus improper and provides bad experience in using it.
Earlier I thought this defect is specific to the phone I purchased, but further I analyzed other 'Microsoft lumia 535' - and the same issue was observed in all the other pieces of lumia 535.
Please let me know, if it is issue and is already known, or if the behavior is intentional then what is the reason for the same?
Regards,
Azmun

For help using Windows Phone please post on the Windows Phone forums on answers.Microsoft.com

When I use camwow, and I take a picture, then i tap the the little thingy that lets you see it. The picture doesnt show. It just shows a black screen with the camwow retro logo in the bottom right corner....PLEASE HELP IMA CRY.

Please help. Like I said when I go to see the picture it just shows a black screen with the little camwow logo in the bottom right corner. I already tried turning it off and turning it back on, and I already tryed reseting it. PLEASE HELP PLEASEEEEEEEEEEEEEE imma cry.

I've tried that.. twice. It didn't work for me - any other suggestions?

T410s - screen makes clunk noise at bottom right support

Similar Messages

Maybe you are looking for