T410s/T410​/T510 DP- HDMI, audio questions, survey

Hi,
after all the confusion concerning DisplayPort-audio and the T-series, I decided to find out for myself and test it at my local Lenovo dealer.
As my dealer had not a single HDMI and audio capable output device in his shop, I brought my own Medion MD 20226 LCD TV, which has 2 HDMI-in ports.
The idea was to use a 2m DisplayPort->HDMI-cable provided by the dealer in order to connect the T410s in question to my little TV.
Background: Due to the misleading information from Lenovo concerning the last generation T400s/T400/T500 models and their audio over DisplayPort issue (no audio at all), I expected to get a picture without any problems but that I would need to figure out how to enable the sound by changing some settings inside Windows 7.
What happened: Actually neither me nor my dealer were able to get ANYTHING out of the DisplayPort, when using the DisplayPort->HDMI-cable. There was NEITHER video NOR audio!
I should point out that at the time being my dealer only had T410s models without the (maybe) switchable NVidia graphics.
Another point that I want to emphasize is that, after 45 minutes of trying everything we could to make it work, we switched to the T510 that was standing right beside the T410s in his show room. Unfortunately I was too confused to ask what kind of graphics setup this machine had, but the result was the same: no video, no audio at the TV.
As it is apparent that there are quite a lot of confused Lenovo customers out there that have similar questions:
I HEREBY FORMALLY ASK FOR A DETAILED AND IN-DEPTH INVESTIGATION/CLARIFICATION OF POSSIBLE DP->HDMI, DP-AUDIO AND DP->HDMI-AUDIO ISSUES WITH THE CURRENT T410s/T410/T510 SERIES (all combinations of graphics cards).
Of course I think that it would be best if one of the Lenovo engineers would take care of that in one of the Lenovo blogs.
But until then, it might be a good starting point to ask those of us, who already have a T410s/T410/T510.
So I just start right away:
MODEL:                   T410s (NUK39GE / 2912-39G)
used GPU:              Intel GMA 5 / QM57
DP->DP-video:       not tested
DP->DP-audio:      not tested
DP->HDMI-video:  tested->not working
DP->HDMI-audio: tested->not working
As I said, I was only able to test it at my local Lenovo dealer and I gave up after around 1 hour of testing. So it might be, that someone who has more time and resources (different adaptors) might be able to get it running.
So to all of you out there with a new Tx10(s), please take the time, find your next HDMI-TV and try it.
And to Lenovo: as long as there is no official statement concerning this, I will keep asking for an official response ;-) (and THIS time, don't blame the chipset, as the new Intel-Calpella has all the HD-video/audio goodness one could ask for: wiki article on Intel Calpella and its DP features).
Thanks for reading all this!

Hello all,
please check out this thread too.
Where Ken (Lenovo staff) explains this feature and possible problems.
I would suggest to do a forum search before starting another thread.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
 English Community       Deutsche Community       Comunidad en Español

Similar Messages

  • HDMI audio questions

    According to this:
    http://support.apple.com/kb/HT4214
    it states that:
    "Which type of audio works with HDMI?
    Apple supports 8 channel 24-bit audio at 192kHz, Dolby Surround 5.1 and stereo output."
    So I have the following questions:
    1. How does one get multi channel PCM music audio out of the mini?
    2. Also, what about just straight stereo rips @ 192kHz/24 bit?
    3. What players will support this?
    4. Since they claim this functionality, what is the big problem with
    streaming TrueHD or DTS-HD with movies? What am I missing here?
    The reason for 1 thru 3 is that I am considering "remastering" some old
    songs for a surround experience to my liking.

    Currently in order to get 8 channel 24 audio out a Mac Mini you need to use a mini Toslink cable. Link this one: http://www.monoprice.com/products/search.asp?keyword=mini+toslink&x=0&y=0
    In the sound preferences set the output to optical.
    You cannot get 5.1 output from the HDMI port for some reason. Only 3.1.
    Dan

  • What happened to the T410s and T510?

    I could have sworn I saw a way to order T410s and T510 when I was comparing the ThinkPad models perhaps a week ago, but I can't see any way to order them anymore. Earlier tonight I was able to access the model pages for the two models by searching for them on the Lenovo site and then clicking on the first result, but they aren't appearing in the search results now. Furthermore, when I try to go to the first link that comes up when I search for either of those models, I see an error that says "Our apologies. The page you requested is not available."
    The "New Product Showcase" page says that these models are "Available now!", but I'm obviously having some problems finding them. Any ideas?

    I just found this thread, which is not good news ... namely they seem to have no clue regarding when they will ship. http://forum.thinkpads.com/viewtopic.php?f=45&t=83866
    I have to agree with one of the writers and his/her comments about their supply chain. They didn't know their %$#@ from a &^% in the ground two years ago when i ordered the T61p ... all manner of stories on the probable ship date, then it turned up out of the blue one day.

  • [SOLVED] HDMI audio not working (worked in Ubuntu)

    hi there,
    I have very new hardware (Intel Core i5 2500, using the internal GPU) and already knew that it would probably take me a while to get everything working (especially the GPU). I first tried Ubuntu 11.04 Alpha with the xorg-edgers ppa, which already supported the new GPU, including 3D acceleration... unfortunately, it made my X server crash about every 15 minutes. Having heard about ArchLinux before I thought I should give it a try. Turned out the packages that I need for my GPU are only available in testing (xf86-video-intel 2.14, Mesa 7.10, Kernel 2.6.37), so I'm running on the testing repository right now. But I gotta say that I'm pretty impressed by ArchLinux, Compiz is working perfectly smooth and the whole system feels way faster than Ubuntu.
    Now regarding my problem, I can't get my HDMI audio to work. Usually I would have said to myself "well, ALSA doesn't support it yet, I guess I'm gonna have to wait" . But the reason I'm writing this thread anyway is that it was working fine in Ubuntu 11.04 Alpha. In Ubuntu, I could use the alsa device hdmi:CARD=PCH,DEV=2 for HDMI audio. The strange thing is, this device doesn't exist on my ArchLinux system. Here is my "aplay -L" output.
    null
    Discard all samples (playback) or generate zero samples (capture)
    default:CARD=PCH
    HDA Intel PCH, ALC892 Analog
    Default Audio Device
    front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    Front speakers
    surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Digital
    IEC958 (S/PDIF) Digital Audio Output
    hdmi:CARD=PCH,DEV=0
    HDA Intel PCH, HDMI 0
    HDMI Audio Output
    In Ubuntu, I also had hdmi:CARD=PCH,DEV=1 and hdmi:CARD=PCH,DEV=2. So my question is, why are those missing on my system? Kernel and ALSA are the same version (2.6.37 / 1.0.23)!? I also already downloaded a Daily Snapshot of ALSA and did a ./configure, make, sudo make install - still no luck. And btw, DEV=0 outputs sound through my default speakers...
    cat /proc/asound/pcm
    00-00: ALC892 Analog : ALC892 Analog : playback 1 : capture 1
    00-01: ALC892 Digital : ALC892 Digital : playback 1
    00-03: HDMI 0 : HDMI 0 : playback 1
    00-07: HDMI 1 : HDMI 1 : playback 1
    00-08: HDMI 2 : HDMI 2 : playback 1
    cat /proc/asound/cards
    0 [PCH ]: HDA-Intel - HDA Intel PCH
    HDA Intel PCH at 0xfe620000 irq 51
    any help would be appreciated..
    ...and really thanks to the whole community, my system is stable as never before and the ArchLinux Wiki is probaby the first Linux Wiki that actually helped me solve my problems.
    Last edited by 65kid (2011-01-27 18:05:09)

    Nevermind, I fixed it myself. ;)
    cat /proc/asound/pcm
    00-00: ALC892 Analog : ALC892 Analog : playback 1 : capture 1
    00-01: ALC892 Digital : ALC892 Digital : playback 1
    00-03: HDMI 0 : HDMI 0 : playback 1
    00-07: HDMI 1 : HDMI 1 : playback 1
    00-08: HDMI 2 : HDMI 2 : playback 1
    00-08 is the missing device I was talking about, aplay -L doesn't list it, but it's there. Anyway, I can use plughw:0,8 to use HDMI audio and it works fine, although I'm still confused about the difference betwenn plughw:x,x and hdmi:CARD=PCH,DEV=X...

  • Is Auto Switch to HDMI Audio Possible?

    I have a dv5-1235dx laptop and use vista, and finally figured out how to get the hdmi sound to work after searching this board and other sites (by manually choosing hdmi as default playback device), but it appears this requires a manual switch every time the hdmi cable is plugged in.  Have updated all drivers etc. (intel high definition hdmi), but still requires manual switch when I want to watch something on my hdtv.  Is there any other driver or solution that would just switch over to hdmi audio automatically when plugged in?  Seems like this is a common issue, and one that ought to be fairly easy to resolve, but i'm  not really that tech savvy so maybe it's more complicated and just an HP/intel issue that can't be resolved?  Anybody have any workarounds for this?

    First of all, its not a Intel/HP issue and your playback device will automatically be set to speakers once you disconnect your HDMI cable.and be automatically set to HDMI once you connect your HDMI cable to the laptop.
    Its similar to how you connect your headphone to headphone jack on the laptop. Make sure setting - HDMI as default playback device has been done when you have disconnected your HDMI cable from the laptop and not when its connected to the laptop.
    In order to do,
    Go to Control Panel\Hardware and Sound and click on sound . On playback tab, right click on white (blank) area and you would see 2 options (Show disabled Devices and Show Disconnected Devices). Make sure both options are checked to have all playback devices listed. 
    Now right click on HDMI ouput device option and ensure "Set as default device" option is checked to hear audio from external display while playing picture on external display.
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • No Sound on nvidia hdmi audio driven display

    I have installed arch on my Dell Dimension XPS 410 with a NvidiaGeforce 210.
    out put from lspci
    01:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce 210] (rev a2)
    01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
    uname -ar out put
    Linux shannon 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011 x86_64 Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz GenuineIntel GNU/Linux
    I have installed nvidia and nvidia-utils how ever I hav e yet to get the hdmi driven audio on my Dynex 32''  Lcd tv which i use as a  repalce ment from an older  dell 2005 FPW.
    My question is how do i get my hdmi fed audio working on the aformentioned  LCD tv?
    lspci | grep nvidia
    nvidia              11783197  40
    i2c_core               20165  3 nvidia,videodev,i2c_i801
    aplay -l
    card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    How do i get thiss hdmi audio device working?
    Last edited by arch_porter88 (2011-08-02 15:19:06)

    Try using this command with all the listed devices until you hear sound from one of them.
    aplay -D hw:1,9 /usr/share/sounds/alsa/Front_Center.wav
    Also, go into alsamixer, press F6 to go to the right sound card, and unmute everything by pressing M (OO means on, MM means muted). For me, I have a similar aplay -l, and for some reason, the correct device for me also hw:1,9 (no clue why there's four of them...), and things like pulse just assume it's 1,3. If you use ALSA, it should be easy to set it up in /etc/asound.conf. If you want pulse, you might have to go into /etc/pulse/default.pa and add a line like this in order for the correct card to show up, it worked for me on my GT430:
    load-module module-alsa-sink device="hw:1,9" sink_name=digital_output
    Last edited by doorknob60 (2011-08-02 18:10:28)

  • How do you setup HDMI audio with "Nvidia Quadro 4000 for Mac"?

    So I just purchased a new Mac Pro:
    Mac Pro (5,1) 3.33 GHz 6-Core
    8 GB Ram
    ATI Radeon HD 5770
    1TB HDD
    OS 10.8.3
    I also purchased a new Nvidia Quadro 4000 for Mac Graphics Card because the 3D animation software I'm using (Blender) requires this card to accelerate render times. 
    I have installed the card and all is working well as far as I can tell except for the HDMI audio.  According to the specs on Nvidia for this card, it DOES support HDMI audio through the Display port.  I have my HDMI cable plugged up and the video works great.  However the audio option does not show up in the System Preferences.  (Here is the page for the graphics card.  Look under "specifications" at the bottom for the audio part.  http://www.nvidia.com/object/product-quadro-4000-mac-us.html).
    I did find a link for a kernel addition for HDMI audio but it stated "non-Apple Nvidia cards" and this one is specifically for Mac.  Here is that link:  http://forums.macrumors.com/showthread.php?t=1499797.  (I also plan on posing the same question there.)
    The reason I want the HDMI to work is I'm using a TV as my monitor.
    Now I did try the HDMI with the ATI Card and both the audio and video work great. 
    What I did for a quick work around is install both cards and use the GPU processor on the Nvidia for the animation program and use the ATI for the actual port and this fixes the hdmi audio issue.  However this takes up pretty much all of my PCI slots and seems like a waste of space and power.
    Has anyone else run into this problem and found a solution??  Any guidance would be greatly appreciated.
    Thanks!

    I went ahead and tried that extension that I found.  It worked! 
    I guess Mac just didn't include the audio support in the driver that it includes.  Below is were I found the instructions and download.  It includes a shell script that installs the kernal from the Terminal prompt.  The instructions were clear and installed with out a hitch.  There were also instructions to remove it if there were issues. 
    Here is the link:
    http://forums.macrumors.com/showthread.php?t=1499797
    Thanks again and hope this helps.

  • U530 Touch - No HDMI audio output

    Hello!
    I just purchased an Ideapad U530 Touch with Windows 8.1.   It's a nice laptop, however, I can no longer do HDMI cleanly with my Samsung TV.  My old HP Pavilion dv7 (using the same HDMI cable) worked flawlessly with video and audio.  With the U530 - I don't get HDMI audio. 
    I've googled this and looked on the forums here, but haven't had success so far.  A summary of what I've tried (note - always with HDMI cable attached):
    - Went to "Playback Devices".  Couldn't find anything there but "Speakers (Realtek High Definition Audio)" and my Soundspot Bluetooth speaker.  Also tried to show disabled devices - but nothing new popped up.
    - Went to Device Manager and noticed "High Definition Audio Device" with a warning that the "device could not start (Code 10)".  Tried Uninstalling the device and reinstalling.  No luck.  Tried uninstalling the driver and scanning for the device, no luck. 
    - Tried switching HDMI cables with another one I know works.  No luck
    - Tried updating Realtek drivers with these but still no luck.  No High Definition Audio devices appeared and still have that warning in Device Manager
    - Tried updating the Nvidia 730M drivers with the 3/10/2014 update.  No luck.
    I noticed that I have two Display Adapters in the Device Manager - the Intel HD Graphics Family one and the Nvidia GeForce GT 730M driver.  Could there be a conflict with the video drivers or something that isn't telling the audio driver, "hey I'm connected to HDMI - send digital audio this way" ? 
    Any other thoughts?  I'm going to try going into the BIOS to see if there's anything I can do there. 
    It's frustrating when you shell out cash for a new laptop and, out of the box, it can't do something your 5 year old laptop did flawlessly.
    Thanks in advance for any suggestions!
    Chris
    Solved!
    Go to Solution.

    hi cmilkosk,
    I'm sorry to hear what happened..
    The HDMI output connect directly to the Intel HD
    Uninstall the Intel Hd Under device Manager and place a check under the prompt "Delete driver software for this device"  restart your computer and install this
     Intel Video Driver for 64-bit Windows 
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • No HDMI Audio on Optimus system

    Hello Everyone,
    I have an Asus G46vw Laptop, and I got HDMI working which did not work out of the box. This laptop has an onboard Intel HD4000 and a Discrete Nvidia 660M. Keep in mind that Bumblebee for me is out of question. I need HDMI video support.  I am having issues with getting HDMI audio to work. I am pretty good at googleing and finding varous solutions to solve other problems I  have had (e.g. HDMI video, borked touchpad, fn keys, etc). Half of my hardware is broken out of the box lol. Now I do have sound through my main speakers. I would try making various conf files with my HDMI hardware ID but unfortunately I don't think it is being detected properly as a sound device. Below is my aplay output.
    # aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: PCH [HDA Intel PCH], device 0: VT1802 Analog [VT1802 Analog]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 1: VT1802 Digital [VT1802 Digital]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 2: VT1802 Alt Analog [VT1802 Alt Analog]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    When I do "#aplay --list-devices | grep -i HDMI" nothing shows up.  Any help is appreciated. Keep in mind I am new to Arch (have been on Ubuntu off and on last several years). I have beaten the hwiki to death I think
    Also this is somewhat off topic but for some reason when HDMI gets activated after boot the boot sequence log is still shown on the Laptop screen. Is this normal? Shouldn't the laptop screen shut off at least after HDMI kicks on or I start my DE? I do not see an option in Settings/Display to turn off laptop screen (Gnome 3 DE)
    Last edited by Sandman007 (2014-04-25 02:45:26)

    I have the same problem.  It doesn't look like the correct things are exposed through the nvidia card/drivers until they fix it.  For instance in my case only the VGA controller is visible through lscpi
    $ lspci |grep NVIDIA
    01:00.0 VGA compatible controller: NVIDIA Corporation GF119M [GeForce GT 520M] (rev a1)

  • Hdmi audio output = digital or pcm?

    Couldn't find anything about the Intel's i5 chipset regarding the hdmi audio out except some posted msgs about "can't boot, bad scaling or don't work".  I have had the hdmi audio out working & getting the sound out from the LG ips22 monitor; the sound "wasn't that good" & have reverted to the audio out ports.
    I've asked LG about the monitor DACs & they said that LG doesn't know as it is whatever the mfg/factory made it(!).
    Now, I just wonder if the monitor really have DACs as there isn't any speakers in the monitor, just an audio out.  The question to me is whether the Intel chipset is sending sound thru hdmi as digital dsd or analogue pcm & whether the setting can be changed with realtek settings.  Blu-ray players has a setting for setting hdmi to digital or pcm.  I realize there is a cost thingy so it is hard to believe that the monitor would have DACs unless it also had speakers.
    Just a asking for info on what msi know about the i5 & its supporting north, south, east west chips (covering all directions).

    Quote
    For digital audio, if an HDMI device supports audio, it is required to support the baseline format: stereo (uncompressed) PCM. Other formats are optional, with HDMI allowing up to 8 channels of uncompressed audio at sample sizes of 16-bit, 20-bit and 24-bit, with sample rates of 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz.[20][51] HDMI also supports any IEC 61937-compliant compressed audio stream, such as Dolby Digital and DTS, and up to 8 channels of one-bit DSD audio (used on Super Audio CDs) at rates up to four times that of Super Audio CD.[51] With version 1.3, HDMI supports lossless compressed audio streams Dolby TrueHD and DTS-HD Master Audio.[51] As with the YCbCr video, device support for audio is optional. Audio Return Channel (ARC) is a feature introduced in the HDMI 1.4 standard.[52] "Return" refers to the case where the audio comes from the TV and can be sent "upstream" to the AV receiver using the HDMI cable connected to the AV receiver.[52] An example given on the HDMI website is that a TV that directly receives a terrestrial/satellite broadcast, or has a video source built in, sends the audio "upstream" to the AV receiver.[52]

  • HDMI audio drop

    Hi,
    Product Number: G9D72UA#ABL
    For the past week I have been expeiriencing an audio signal drop.  The most notable symptom is that it occurs on a regular interval of 8 minutes!
    I am using a wireless keyboard and the PC is used as a steaming device for my TV.  To reset the audio sound, from my remote keyboard I press "mute" button twice (off/on) and I am good for another 8 minutes?  I have tried the following:
    1. Using the PC speakers for sound, bypassing the HDMI, the sound still drops
    2. Eliminating the wirelss keyboard and using the laptop keyboard the sound still drops
    3. Eliminating the TV and viewing on the laptop screen, and the sound still drops
    I have also looked at the "Power Plan" to verify sleep settings are correct, they seem to be but I could be missing something here?
    Your help is appreciated.
    Thanks.

    Hello @pilwiz,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how the HDMI audio drops every 8 minutes on your notebook computer, and I would be happy to assist you in this matter!
    'Since this issue is often caused by Windows thinking you are running an application that uses a microphone / telephony, it lowers the sounds for you. To disable this behaviour, please follow the steps below:
    In the Start menu, search in the Settings category (Win+W) for "Change Sound Card Settings". 
    In the Communications tab, change "When Windows detects communications activity" to Do nothing.'
    reference: http://superuser.com/questions/504004/windows-8-tu​rns-program-sound-volume-down-randomly
    If the issue continues, I recommend performing a backup and recovery of your notebook's operating system. This can be done by following this Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should help return your system back to factory defaults.
    If the issue continues, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • [Solved] Issue setting HDMI audio to default

    Hoping I'm not overlooking something very simple here.
    I have a Radeon HD4650 in my HTPC which I'm trying to run the audio through the HDMI output. I've set the kernel parameter "radeon.audio=1" and am able to hear sound through HDMI when I specify it manually within each application (for example XBMC or VLC going to Audio->Audio Device->HD-Audio Generic, HDMI 0 HDMI Audio Output).
    From there I tried to set the HDMI audio as default by following the wiki here:
    https://wiki.archlinux.org/index.php/Al … sound_card
    And here:
    https://wiki.archlinux.org/index.php/Al … s_not_work
    I've tried several combinations within my .asoundrc and asound.conf including:
    pcm.!default {
    type plug
    slave.pcm {
    @func getenv
    vars [ ALSAPCM ]
    default "hw:0,3"
    defaults.pcm.card 0
    defaults.pcm.device 3
    defaults.ctl.card 0
    pcm.!default "plughw:0,3"
    ctl.!default "plughw:0,3"
    pcm.dmixer {
    type dmix
    ipc_key 2048
    slave {
    pcm "hw:0,3"
    period_size 512
    buffer_size 4096
    rate 48000
    format S16_LE
    bindings {
    0 0
    1 1
    pcm.!default {
    type plug
    slave.pcm dmixer
    pcm:iec958 {
    type plug
    slave.pcm dmixer
    pcm.!default {
    type plug
    slave {
    pcm "hw:0,3"
    ctl.!default {
    type hw
    card 0
    Most of these I just copied from the wiki or various forum posts I found and edited the proper device in. These appear to work, as the HDMI card shows up as default in alsamixer (I've made sure everything is unmuted here), but selecting the default channel in VLC still results in no sound, not even from the built in audio (I can change the output to the HDMI option and it works fine).
    I've also tried this which results in no sound:
    aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
    Is there something I'm missing here?
    Here's my aplay -l:
    **** List of PLAYBACK Hardware Devices ****
    card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: Intel [HDA Intel], device 1: ALC1200 Digital [ALC1200 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    A quick note here: I set this option in /etc/modprobe.d/:
    options snd_hda_intel index=-2
    This moved the HDMI card up to device 0 instead of 1. I've tried everything above as well with plughw:1,3 when that was the HDMI device.
    aplay -L:
    null
    Discard all samples (playback) or generate zero samples (capture)
    hdmi:CARD=Generic,DEV=0
    HD-Audio Generic, HDMI 0
    HDMI Audio Output
    sysdefault:CARD=Intel
    HDA Intel, ALC1200 Analog
    Default Audio Device
    front:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    Front speakers
    surround40:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Digital
    IEC958 (S/PDIF) Digital Audio Output
    lsmod | grep snd:
    snd_hda_codec_hdmi 29701 1
    snd_hda_codec_realtek 35517 1
    snd_hda_intel 35309 0
    snd_hda_codec 147474 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    snd_hwdep 6332 1 snd_hda_codec
    snd_pcm 77765 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 7234 2 snd_pcm,snd_hda_intel
    snd_timer 18718 1 snd_pcm
    snd 58950 7 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
    soundcore 5418 1 snd
    amixer -c 0:
    Simple mixer control 'PCM',0
    Capabilities: pvolume
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 255
    Mono:
    Front Left: Playback 255 [100%] [0.00dB]
    Front Right: Playback 255 [100%] [0.00dB]
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [on]
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.10.2-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Mon Jul 22 08:47:24 CEST 2013
    [ 0.000000] Command line: root=/dev/system/root cryptdevice=/dev/sda2:system resume=/dev/system/swap ro radeon.audio=1 initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ee6ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007ee70000-0x000000007eecbfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000007eecc000-0x000000007fdf4fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007fdf5000-0x000000007fe00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000007fe01000-0x000000007fe97fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007fe98000-0x000000007fee7fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000007fee8000-0x000000007feebfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007feec000-0x000000007fef0fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000007fef1000-0x000000007fef1fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007fef2000-0x000000007fefefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000007feff000-0x000000007fefffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007ff00000-0x000000007fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.4 present.
    [ 0.000000] DMI: /DG35EC, BIOS ECG3510M.86A.0118.2010.0113.1426 01/13/2010
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x7ff00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000fe200-0x000fe20f] mapped at [ffff8800000fe200]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000089000] 89000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b22000, 0x01b22fff] PGTABLE
    [ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
    [ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x7fa00000-0x7fbfffff]
    [ 0.000000] [mem 0x7fa00000-0x7fbfffff] page 2M
    [ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7ee6ffff]
    [ 0.000000] [mem 0x7c000000-0x7edfffff] page 2M
    [ 0.000000] [mem 0x7ee00000-0x7ee6ffff] page 4k
    [ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x7eecc000-0x7f9fffff]
    [ 0.000000] [mem 0x7eecc000-0x7effffff] page 4k
    [ 0.000000] [mem 0x7f000000-0x7f9fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdf4fff]
    [ 0.000000] [mem 0x7fc00000-0x7fdf4fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x7fe01000-0x7fe97fff]
    [ 0.000000] [mem 0x7fe01000-0x7fe97fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x7fee8000-0x7feebfff]
    [ 0.000000] [mem 0x7fee8000-0x7feebfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x7fef1000-0x7fef1fff]
    [ 0.000000] [mem 0x7fef1000-0x7fef1fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x7feff000-0x7fefffff]
    [ 0.000000] [mem 0x7feff000-0x7fefffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x7e79a000-0x7ee6efff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 00014 (v00 INTEL )
    [ 0.000000] ACPI: RSDT 000000007fefd038 0004C (v01 INTEL ECG3510M 00000076 01000013)
    [ 0.000000] ACPI: FACP 000000007fefc000 00074 (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 000000007fef6000 05BEB (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: FACS 000000007fe98000 00040
    [ 0.000000] ACPI: APIC 000000007fef5000 00078 (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: WDDT 000000007fef4000 00040 (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 000000007fef3000 0003C (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: ASF! 000000007fef2000 000A6 (v32 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007fef0000 0020C (v01 INTEL CpuPm 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007feef000 001B7 (v01 INTEL Cpu0Ist 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007feee000 001B7 (v01 INTEL Cpu1Ist 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007feed000 001B7 (v01 INTEL Cpu2Ist 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007feec000 001B7 (v01 INTEL Cpu3Ist 00000076 MSFT 01000013)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fefffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fefffff]
    [ 0.000000] NODE_DATA [mem 0x7fe93000-0x7fe97fff]
    [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007c600000-ffff88007e5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0008efff]
    [ 0.000000] node 0: [mem 0x00100000-0x7ee6ffff]
    [ 0.000000] node 0: [mem 0x7eecc000-0x7fdf4fff]
    [ 0.000000] node 0: [mem 0x7fe01000-0x7fe97fff]
    [ 0.000000] node 0: [mem 0x7fee8000-0x7feebfff]
    [ 0.000000] node 0: [mem 0x7fef1000-0x7fef1fff]
    [ 0.000000] node 0: [mem 0x7feff000-0x7fefffff]
    [ 0.000000] On node 0 totalpages: 523716
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3982 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 8124 pages used for memmap
    [ 0.000000] DMA32 zone: 519734 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000008f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 000000007ee70000 - 000000007eecc000
    [ 0.000000] PM: Registered nosave memory: 000000007fdf5000 - 000000007fe01000
    [ 0.000000] PM: Registered nosave memory: 000000007fe98000 - 000000007fee8000
    [ 0.000000] PM: Registered nosave memory: 000000007feec000 - 000000007fef1000
    [ 0.000000] PM: Registered nosave memory: 000000007fef2000 - 000000007feff000
    [ 0.000000] e820: [mem 0x80000000-0xffefffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88007f800000 s86144 r8192 d24448 u524288
    [ 0.000000] pcpu-alloc: s86144 r8192 d24448 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515507
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: root=/dev/system/root cryptdevice=/dev/sda2:system resume=/dev/system/swap ro radeon.audio=1 initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 2042856k/2096128k available (4920k kernel code, 1264k absent, 52008k reserved, 4046k data, 1124k init)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 8388608 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2188.974 MHz processor
    [ 0.006671] Calibrating delay loop (skipped), value calculated using timer frequency.. 4379.36 BogoMIPS (lpj=7296580)
    [ 0.006675] pid_max: default: 32768 minimum: 301
    [ 0.006714] Security Framework initialized
    [ 0.006729] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006937] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.008033] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.008556] Mount-cache hash table entries: 256
    [ 0.008842] Initializing cgroup subsys memory
    [ 0.008862] Initializing cgroup subsys devices
    [ 0.008864] Initializing cgroup subsys freezer
    [ 0.008866] Initializing cgroup subsys net_cls
    [ 0.008868] Initializing cgroup subsys blkio
    [ 0.008905] CPU: Physical Processor ID: 0
    [ 0.008907] CPU: Processor Core ID: 0
    [ 0.008910] mce: CPU supports 6 MCE banks
    [ 0.008918] CPU0: Thermal monitoring enabled (TM2)
    [ 0.008926] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift: -1
    [ 0.009009] Freeing SMP alternatives: 20k freed
    [ 0.010372] ACPI: Core revision 20130328
    [ 0.013611] ACPI: All ACPI Tables successfully acquired
    [ 0.014894] ftrace: allocating 19564 entries in 77 pages
    [ 0.020479] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.055426] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz (fam: 06, model: 0f, stepping: 0d)
    [ 0.056666] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    [ 0.056666] perf_event_intel: PEBS disabled due to CPU errata
    [ 0.056666] ... version: 2
    [ 0.056666] ... bit width: 40
    [ 0.056666] ... generic registers: 2
    [ 0.056666] ... value mask: 000000ffffffffff
    [ 0.056666] ... max period: 000000007fffffff
    [ 0.056666] ... fixed-purpose events: 3
    [ 0.056666] ... event mask: 0000000700000003
    [ 0.090007] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.076769] smpboot: Booting Node 0, Processors #1
    [ 0.090021] Brought up 2 CPUs
    [ 0.090024] smpboot: Total of 2 processors activated (8759.72 BogoMIPS)
    [ 0.091305] devtmpfs: initialized
    [ 0.091305] PM: Registering ACPI NVS region [mem 0x7ee70000-0x7eecbfff] (376832 bytes)
    [ 0.091305] PM: Registering ACPI NVS region [mem 0x7fe98000-0x7fee7fff] (327680 bytes)
    [ 0.091305] RTC time: 21:34:09, date: 08/06/13
    [ 0.091305] NET: Registered protocol family 16
    [ 0.091305] ACPI: bus type PCI registered
    [ 0.091305] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
    [ 0.091305] PCI: not using MMCONFIG
    [ 0.091305] PCI: Using configuration type 1 for base access
    [ 0.093396] bio: create slab <bio-0> at 0
    [ 0.093411] ACPI: Added _OSI(Module Device)
    [ 0.093411] ACPI: Added _OSI(Processor Device)
    [ 0.093411] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.093411] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.094284] ACPI: EC: Look up EC in DSDT
    [ 0.097855] ACPI: Interpreter enabled
    [ 0.097864] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
    [ 0.097879] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.097881] ACPI: Using IOAPIC for interrupt routing
    [ 0.097896] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
    [ 0.098027] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources
    [ 0.115962] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.116042] ACPI: No dock devices found.
    [ 0.121485] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.122691] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
    [ 0.122777] PCI host bridge to bus 0000:00
    [ 0.122781] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.122783] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.122786] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.122788] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.122791] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff]
    [ 0.122793] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfeafffff]
    [ 0.122795] pci_bus 0000:00: root bus resource [mem 0x80000000-0xefffffff]
    [ 0.122806] pci 0000:00:00.0: [8086:2980] type 00 class 0x060000
    [ 0.122920] pci 0000:00:01.0: [8086:2981] type 01 class 0x060400
    [ 0.122965] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.122994] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.123063] pci 0000:00:19.0: [8086:104b] type 00 class 0x020000
    [ 0.123081] pci 0000:00:19.0: reg 10: [mem 0x90b00000-0x90b1ffff]
    [ 0.123089] pci 0000:00:19.0: reg 14: [mem 0x90b24000-0x90b24fff]
    [ 0.123098] pci 0000:00:19.0: reg 18: [io 0x30c0-0x30df]
    [ 0.123156] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 0.123180] pci 0000:00:19.0: System wakeup disabled by ACPI
    [ 0.123224] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
    [ 0.123264] pci 0000:00:1a.0: reg 20: [io 0x30a0-0x30bf]
    [ 0.123345] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.123387] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
    [ 0.123427] pci 0000:00:1a.1: reg 20: [io 0x3080-0x309f]
    [ 0.123507] pci 0000:00:1a.1: System wakeup disabled by ACPI
    [ 0.123560] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
    [ 0.123579] pci 0000:00:1a.7: reg 10: [mem 0x90b25400-0x90b257ff]
    [ 0.123661] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.123725] pci 0000:00:1a.7: System wakeup disabled by ACPI
    [ 0.123775] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
    [ 0.123790] pci 0000:00:1b.0: reg 10: [mem 0x90b20000-0x90b23fff 64bit]
    [ 0.123859] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.123926] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.123974] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
    [ 0.124043] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.124074] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.124118] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
    [ 0.124188] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.124220] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 0.124264] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
    [ 0.124333] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.124366] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.124414] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
    [ 0.124454] pci 0000:00:1d.0: reg 20: [io 0x3060-0x307f]
    [ 0.124522] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.124567] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
    [ 0.124607] pci 0000:00:1d.1: reg 20: [io 0x3040-0x305f]
    [ 0.124675] pci 0000:00:1d.1: System wakeup disabled by ACPI
    [ 0.124717] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
    [ 0.124757] pci 0000:00:1d.2: reg 20: [io 0x3020-0x303f]
    [ 0.124827] pci 0000:00:1d.2: System wakeup disabled by ACPI
    [ 0.124880] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
    [ 0.124899] pci 0000:00:1d.7: reg 10: [mem 0x90b25000-0x90b253ff]
    [ 0.124981] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.125043] pci 0000:00:1d.7: System wakeup disabled by ACPI
    [ 0.125088] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    [ 0.125156] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 0.125205] pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100
    [ 0.125284] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
    [ 0.125289] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
    [ 0.125293] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
    [ 0.125376] pci 0000:00:1f.2: [8086:2820] type 00 class 0x01018f
    [ 0.125390] pci 0000:00:1f.2: reg 10: [io 0x3438-0x343f]
    [ 0.125399] pci 0000:00:1f.2: reg 14: [io 0x344c-0x344f]
    [ 0.125407] pci 0000:00:1f.2: reg 18: [io 0x3430-0x3437]
    [ 0.125415] pci 0000:00:1f.2: reg 1c: [io 0x3448-0x344b]
    [ 0.125423] pci 0000:00:1f.2: reg 20: [io 0x3410-0x341f]
    [ 0.125432] pci 0000:00:1f.2: reg 24: [io 0x3400-0x340f]
    [ 0.125461] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.125543] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
    [ 0.125555] pci 0000:00:1f.3: reg 10: [mem 0x90b25800-0x90b258ff]
    [ 0.125582] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
    [ 0.125683] pci 0000:00:1f.5: [8086:2825] type 00 class 0x010185
    [ 0.125697] pci 0000:00:1f.5: reg 10: [io 0x3428-0x342f]
    [ 0.125706] pci 0000:00:1f.5: reg 14: [io 0x3444-0x3447]
    [ 0.125714] pci 0000:00:1f.5: reg 18: [io 0x3420-0x3427]
    [ 0.125722] pci 0000:00:1f.5: reg 1c: [io 0x3440-0x3443]
    [ 0.125730] pci 0000:00:1f.5: reg 20: [io 0x30f0-0x30ff]
    [ 0.125739] pci 0000:00:1f.5: reg 24: [io 0x30e0-0x30ef]
    [ 0.125768] pci 0000:00:1f.5: PME# supported from D3hot
    [ 0.125901] pci 0000:01:00.0: [1002:6779] type 00 class 0x030000
    [ 0.125917] pci 0000:01:00.0: reg 10: [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.125930] pci 0000:01:00.0: reg 18: [mem 0x90a00000-0x90a1ffff 64bit]
    [ 0.125939] pci 0000:01:00.0: reg 20: [io 0x2000-0x20ff]
    [ 0.125954] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
    [ 0.125992] pci 0000:01:00.0: supports D1 D2
    [ 0.126044] pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
    [ 0.126060] pci 0000:01:00.1: reg 10: [mem 0x90a20000-0x90a23fff 64bit]
    [ 0.126130] pci 0000:01:00.1: supports D1 D2
    [ 0.126194] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.126198] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 0.126201] pci 0000:00:01.0: bridge window [mem 0x90a00000-0x90afffff]
    [ 0.126206] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.126282] pci 0000:02:00.0: [1106:3432] type 00 class 0x0c0330
    [ 0.126300] pci 0000:02:00.0: reg 10: [mem 0x90900000-0x90900fff]
    [ 0.126416] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.130024] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.130034] pci 0000:00:1c.0: bridge window [mem 0x90900000-0x909fffff]
    [ 0.130126] pci 0000:03:00.0: [1131:7164] type 00 class 0x048000
    [ 0.130153] pci 0000:03:00.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
    [ 0.130174] pci 0000:03:00.0: reg 18: [mem 0x90400000-0x907fffff 64bit]
    [ 0.130281] pci 0000:03:00.0: supports D1 D2
    [ 0.130283] pci 0000:03:00.0: PME# supported from D0 D1 D2
    [ 0.136688] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.136698] pci 0000:00:1c.1: bridge window [mem 0x90000000-0x907fffff]
    [ 0.136792] pci 0000:04:00.0: [197b:2368] type 00 class 0x010185
    [ 0.136823] pci 0000:04:00.0: reg 10: [io 0x1018-0x101f]
    [ 0.136837] pci 0000:04:00.0: reg 14: [io 0x1024-0x1027]
    [ 0.136851] pci 0000:04:00.0: reg 18: [io 0x1010-0x1017]
    [ 0.136866] pci 0000:04:00.0: reg 1c: [io 0x1020-0x1023]
    [ 0.136880] pci 0000:04:00.0: reg 20: [io 0x1000-0x100f]
    [ 0.136906] pci 0000:04:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
    [ 0.137025] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.137035] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.137039] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
    [ 0.137098] pci 0000:05:03.0: [1814:0301] type 00 class 0x028000
    [ 0.137116] pci 0000:05:03.0: reg 10: [mem 0x90800000-0x90807fff]
    [ 0.137237] pci 0000:05:05.0: [11c1:5811] type 00 class 0x0c0010
    [ 0.137254] pci 0000:05:05.0: reg 10: [mem 0x90808000-0x90808fff]
    [ 0.137329] pci 0000:05:05.0: supports D1 D2
    [ 0.137331] pci 0000:05:05.0: PME# supported from D0 D1 D2 D3hot
    [ 0.137409] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
    [ 0.137415] pci 0000:00:1e.0: bridge window [mem 0x90800000-0x908fffff]
    [ 0.137421] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.137423] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.137426] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.137428] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive decode)
    [ 0.137431] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfeafffff] (subtractive decode)
    [ 0.137433] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xefffffff] (subtractive decode)
    [ 0.137455] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.137457] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.137544] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.137616] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
    [ 0.137685] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
    [ 0.137753] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.137820] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
    [ 0.137887] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.137954] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
    [ 0.138021] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.138507] ACPI: Enabled 4 GPEs in block 00 to 1F
    [ 0.138515] acpi root: \_SB_.PCI0 notify handler is installed
    [ 0.138552] Found 1 acpi root devices
    [ 0.138645] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.138645] vgaarb: loaded
    [ 0.138645] vgaarb: bridge control possible 0000:01:00.0
    [ 0.138645] PCI: Using ACPI for IRQ routing
    [ 0.141702] PCI: pci_cache_line_size set to 64 bytes
    [ 0.141771] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
    [ 0.141774] e820: reserve RAM buffer [mem 0x7ee70000-0x7fffffff]
    [ 0.141776] e820: reserve RAM buffer [mem 0x7fdf5000-0x7fffffff]
    [ 0.141778] e820: reserve RAM buffer [mem 0x7fe98000-0x7fffffff]
    [ 0.141780] e820: reserve RAM buffer [mem 0x7feec000-0x7fffffff]
    [ 0.141782] e820: reserve RAM buffer [mem 0x7fef2000-0x7fffffff]
    [ 0.141784] e820: reserve RAM buffer [mem 0x7ff00000-0x7fffffff]
    [ 0.141898] NetLabel: Initializing
    [ 0.141900] NetLabel: domain hash size = 128
    [ 0.141901] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.141917] NetLabel: unlabeled traffic allowed by default
    [ 0.141945] Switching to clocksource refined-jiffies
    [ 0.148603] pnp: PnP ACPI init
    [ 0.148630] ACPI: bus type PNP registered
    [ 0.148744] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
    [ 0.148747] system 00:00: [mem 0xfed13000-0xfed13fff] has been reserved
    [ 0.148750] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.148753] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.148756] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.148758] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.148761] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.148764] system 00:00: [mem 0xfed45000-0xfed99fff] has been reserved
    [ 0.148767] system 00:00: [mem 0x000c0000-0x000dffff] could not be reserved
    [ 0.148769] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.148774] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.148919] pnp 00:01: [dma 4]
    [ 0.148948] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.148992] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.149031] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.149063] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.149126] system 00:05: [io 0x0500-0x053f] has been reserved
    [ 0.149129] system 00:05: [io 0x0400-0x047f] has been reserved
    [ 0.149132] system 00:05: [io 0x0360-0x0361] has been reserved
    [ 0.149135] system 00:05: [io 0x0680-0x06ff] has been reserved
    [ 0.149139] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.149220] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.149501] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.149573] pnp 00:08: Plug and Play ACPI device, IDs PNP0003 (active)
    [ 0.149624] pnp: PnP ACPI: found 9 devices
    [ 0.149626] ACPI: bus type PNP unregistered
    [ 0.156213] Switching to clocksource acpi_pm
    [ 0.156232] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    [ 0.156236] pci 0000:04:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 0.156264] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 0.156267] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.156276] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
    [ 0.156279] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
    [ 0.156288] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x001fffff pref] to [bus 04] add_size 200000
    [ 0.156291] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
    [ 0.156304] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.156307] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.156310] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.156313] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
    [ 0.156315] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.156318] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.156324] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8000000-0xf81fffff 64bit pref]
    [ 0.156327] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
    [ 0.156330] pci 0000:00:1c.2: BAR 14: assigned [mem 0xf8400000-0xf85fffff]
    [ 0.156334] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf8600000-0xf88fffff pref]
    [ 0.156337] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
    [ 0.156340] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
    [ 0.156344] pci 0000:01:00.0: BAR 6: assigned [mem 0x90a40000-0x90a5ffff pref]
    [ 0.156348] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.156351] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 0.156355] pci 0000:00:01.0: bridge window [mem 0x90a00000-0x90afffff]
    [ 0.156358] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.156363] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.156366] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
    [ 0.156371] pci 0000:00:1c.0: bridge window [mem 0x90900000-0x909fffff]
    [ 0.156375] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff 64bit pref]
    [ 0.156381] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.156384] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
    [ 0.156389] pci 0000:00:1c.1: bridge window [mem 0x90000000-0x907fffff]
    [ 0.156393] pci 0000:00:1c.1: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
    [ 0.156400] pci 0000:04:00.0: BAR 6: assigned [mem 0xf8600000-0xf860ffff pref]
    [ 0.156402] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.156405] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
    [ 0.156410] pci 0000:00:1c.2: bridge window [mem 0xf8400000-0xf85fffff]
    [ 0.156414] pci 0000:00:1c.2: bridge window [mem 0xf8600000-0xf88fffff pref]
    [ 0.156421] pci 0000:00:1e.0: PCI bridge to [bus 05]
    [ 0.156425] pci 0000:00:1e.0: bridge window [mem 0x90800000-0x908fffff]
    [ 0.156425] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.156425] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.156425] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.156425] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.156425] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff]
    [ 0.156425] pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfeafffff]
    [ 0.156425] pci_bus 0000:00: resource 9 [mem 0x80000000-0xefffffff]
    [ 0.156425] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    [ 0.156425] pci_bus 0000:01: resource 1 [mem 0x90a00000-0x90afffff]
    [ 0.156425] pci_bus 0000:01: resource 2 [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.156425] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
    [ 0.156425] pci_bus 0000:02: resource 1 [mem 0x90900000-0x909fffff]
    [ 0.156425] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf81fffff 64bit pref]
    [ 0.156425] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
    [ 0.156425] pci_bus 0000:03: resource 1 [mem 0x90000000-0x907fffff]
    [ 0.156425] pci_bus 0000:03: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
    [ 0.156425] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
    [ 0.156425] pci_bus 0000:04: resource 1 [mem 0xf8400000-0xf85fffff]
    [ 0.156425] pci_bus 0000:04: resource 2 [mem 0xf8600000-0xf88fffff pref]
    [ 0.156425] pci_bus 0000:05: resource 1 [mem 0x90800000-0x908fffff]
    [ 0.156425] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
    [ 0.156425] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
    [ 0.156425] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.156425] pci_bus 0000:05: resource 7 [mem 0x000e0000-0x000effff]
    [ 0.156425] pci_bus 0000:05: resource 8 [mem 0xf8000000-0xfeafffff]
    [ 0.156425] pci_bus 0000:05: resource 9 [mem 0x80000000-0xefffffff]
    [ 0.156425] NET: Registered protocol family 2
    [ 0.156425] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
    [ 0.156425] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
    [ 0.156425] TCP: Hash tables configured (established 16384 bind 16384)
    [ 0.156425] TCP: reno registered
    [ 0.156425] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.156425] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.156425] NET: Registered protocol family 1
    [ 0.156791] pci 0000:01:00.0: Boot video device
    [ 0.156891] PCI: CLS 64 bytes, default 64
    [ 0.156941] Unpacking initramfs...
    [ 0.310182] Freeing initrd memory: 6996k freed
    [ 0.313496] Scanning for low memory corruption every 60 seconds
    [ 0.313787] audit: initializing netlink socket (disabled)
    [ 0.313804] type=2000 audit(1375824849.313:1): initialized
    [ 0.326819] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.328674] VFS: Disk quotas dquot_6.5.2
    [ 0.328731] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.328948] msgmni has been set to 4003
    [ 0.329231] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.329273] io scheduler noop registered
    [ 0.329276] io scheduler deadline registered
    [ 0.329310] io scheduler cfq registered (default)
    [ 0.329439] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.329503] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.329571] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    [ 0.329644] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
    [ 0.329814] intel_idle: does not run on family 6 model 15
    [ 0.329849] GHES: HEST is not enabled!
    [ 0.329917] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.350447] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.350819] Linux agpgart interface v0.103
    [ 0.350895] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.353919] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.353952] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.354077] mousedev: PS/2 mouse device common for all mice
    [ 0.354143] rtc_cmos 00:02: RTC can wake from S4
    [ 0.354275] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 0.354297] rtc_cmos 00:02: alarms up to one month, 114 bytes nvram
    [ 0.354307] cpuidle: using governor ladder
    [ 0.354309] cpuidle: using governor menu
    [ 0.354362] drop_monitor: Initializing network drop monitor service
    [ 0.354438] TCP: cubic registered
    [ 0.354554] NET: Registered protocol family 10
    [ 0.354764] NET: Registered protocol family 17
    [ 0.354780] Key type dns_resolver registered
    [ 0.355037] PM: Checking hibernation image partition /dev/system/swap
    [ 0.397240] PM: Hibernation image not present or could not be loaded.
    [ 0.397253] registered taskstats version 1
    [ 0.397804] Magic number: 9:719:600
    [ 0.397885] rtc_cmos 00:02: setting system clock to 2013-08-06 21:34:10 UTC (1375824850)
    [ 0.398920] Freeing unused kernel memory: 1124k freed
    [ 0.399295] Write protecting the kernel read-only data: 8192k
    [ 0.402578] Freeing unused kernel memory: 1212k freed
    [ 0.404163] Freeing unused kernel memory: 408k freed
    [ 0.412320] systemd-udevd[45]: starting version 204
    [ 0.417813] [drm] Initialized drm 1.1.0 20060810
    [ 0.423117] [drm] radeon kernel modesetting enabled.
    [ 0.423539] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x174B:0xE180).
    [ 0.423580] [drm] register mmio base: 0x90A00000
    [ 0.423582] [drm] register mmio size: 131072
    [ 0.424493] ATOM BIOS: CAICOS
    [ 0.424939] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
    [ 0.424942] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
    [ 0.425844] [drm] Detected VRAM RAM=512M, BAR=256M
    [ 0.425848] [drm] RAM width 64bits DDR
    [ 0.425929] [TTM] Zone kernel: Available graphics memory: 1026308 kiB
    [ 0.425931] [TTM] Initializing pool allocator
    [ 0.425937] [TTM] Initializing DMA pool allocator
    [ 0.425964] [drm] radeon: 512M of VRAM memory ready
    [ 0.425966] [drm] radeon: 512M of GTT memory ready.
    [ 0.426256] radeon 0000:01:00.0: ffff88007e85a800 unpin not necessary
    [ 0.881477] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90008be6118
    [ 0.881489] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [ 0.882702] [drm] Loading CAICOS Microcode
    [ 0.901197] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    [ 0.901323] radeon 0000:01:00.0: WB enabled
    [ 0.901327] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880079fd2c00
    [ 0.901330] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880079fd2c0c
    [ 0.903890] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000174118 and cpu addr 0xffffc90009432118
    [ 0.903895] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 0.903897] [drm] Driver supports precise vblank timestamp query.
    [ 0.903924] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
    [ 0.903940] radeon 0000:01:00.0: radeon: using MSI.
    [ 0.903977] [drm] radeon: irq initialized.
    [ 0.920415] [drm] ring test on 0 succeeded in 2 usecs
    [ 0.920480] [drm] ring test on 3 succeeded in 1 usecs
    [ 1.106683] [drm] ring test on 5 succeeded in 2 usecs
    [ 1.106688] [drm] UVD initialized successfully.
    [ 1.106780] [drm] Enabling audio support
    [ 1.106827] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 1.106873] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 1.259354] [drm] ib test on ring 5 succeeded
    [ 1.259721] [drm] Radeon Display Connectors
    [ 1.259723] [drm] Connector 0:
    [ 1.259725] [drm] HDMI-A-1
    [ 1.259726] [drm] HPD2
    [ 1.259729] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
    [ 1.259730] [drm] Encoders:
    [ 1.259732] [drm] DFP1: INTERNAL_UNIPHY1
    [ 1.259733] [drm] Connector 1:
    [ 1.259734] [drm] VGA-1
    [ 1.259736] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
    [ 1.259738] [drm] Encoders:
    [ 1.259739] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 1.259818] [drm] Internal thermal controller with fan control
    [ 1.260722] [drm] radeon: power management initialized
    [ 1.313356] tsc: Refined TSC clocksource calibration: 2188.999 MHz
    [ 1.313363] Switching to clocksource tsc
    [ 1.331618] [drm] fb mappable at 0x80375000
    [ 1.331620] [drm] vram apper at 0x80000000
    [ 1.331622] [drm] size 8294400
    [ 1.331623] [drm] fb depth is 24
    [ 1.331625] [drm] pitch is 7680
    [ 1.331702] fbcon: radeondrmfb (fb0) is primary device
    [ 1.544648] Console: switching to colour frame buffer device 240x67
    [ 1.550480] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [ 1.550482] radeon 0000:01:00.0: registered panic notifier
    [ 1.550488] [drm] Initialized radeon 2.33.0 20080528 for 0000:01:00.0 on minor 0
    [ 1.551576] device-mapper: uevent: version 1.0.3
    [ 1.551788] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
    [ 1.584940] SCSI subsystem initialized
    [ 1.587002] ACPI: bus type ATA registered
    [ 1.587124] ACPI: bus type USB registered
    [ 1.587165] usbcore: registered new interface driver usbfs
    [ 1.587199] libata version 3.00 loaded.
    [ 1.587772] ata_piix 0000:00:1f.2: version 2.13
    [ 1.587914] ata_piix 0000:00:1f.2: MAP [
    [ 1.587916] P0 P2 P1 P3 ]
    [ 1.590067] usbcore: registered new interface driver hub
    [ 1.590515] usbcore: registered new device driver usb
    [ 1.591219] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.591393] ehci-pci: EHCI PCI platform driver
    [ 1.592276] xhci_hcd 0000:02:00.0: xHCI Host Controller
    [ 1.592288] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
    [ 1.592501] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
    [ 1.592673] xHCI xhci_add_endpoint called for root hub
    [ 1.592675] xHCI xhci_check_bandwidth called for root hub
    [ 1.592706] hub 1-0:1.0: USB hub found
    [ 1.592713] hub 1-0:1.0: 1 port detected
    [ 1.592813] xhci_hcd 0000:02:00.0: xHCI Host Controller
    [ 1.592819] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
    [ 1.592917] xHCI xhci_add_endpoint called for root hub
    [ 1.592919] xHCI xhci_check_bandwidth called for root hub
    [ 1.592948] hub 2-0:1.0: USB hub found
    [ 1.592957] hub 2-0:1.0: 4 ports detected
    [ 1.593131] scsi0 : pata_jmicron
    [ 1.593158] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.593424] scsi1 : pata_jmicron
    [ 1.593609] ata1: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 18
    [ 1.593612] ata2: PATA max UDMA/100 cmd 0x1010 ctl 0x1020 bmdma 0x1008 irq 18
    [ 1.596715] firewire_ohci 0000:05:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x80
    [ 1.740079] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 1.740483] scsi2 : ata_piix
    [ 1.740779] scsi3 : ata_piix
    [ 1.741044] ata3: SATA max UDMA/133 cmd 0x3438 ctl 0x344c bmdma 0x3410 irq 19
    [ 1.741049] ata4: SATA max UDMA/133 cmd 0x3430 ctl 0x3448 bmdma 0x3418 irq 19
    [ 1.741248] ata_piix 0000:00:1f.5: MAP [
    [ 1.741250] P0 -- P1 -- ]
    [ 1.741284] ata_piix 0000:00:1f.5: setting latency timer to 64
    [ 1.741526] scsi4 : ata_piix
    [ 1.741784] scsi5 : ata_piix
    [ 1.742032] ata5: SATA max UDMA/133 cmd 0x3428 ctl 0x3444 bmdma 0x30f0 irq 19
    [ 1.742036] ata6: SATA max UDMA/133 cmd 0x3420 ctl 0x3440 bmdma 0x30f8 irq 19
    [ 1.742228] ehci-pci 0000:00:1a.7: setting latency timer to 64
    [ 1.742244] ehci-pci 0000:00:1a.7: EHCI Host Controller
    [ 1.742252] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
    [ 1.742266] ehci-pci 0000:00:1a.7: debug port 1
    [ 1.746161] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
    [ 1.746168] ehci-pci 0000:00:1a.7: irq 18, io mem 0x90b25400
    [ 1.753360] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 1.753568] hub 3-0:1.0: USB hub found
    [ 1.753573] hub 3-0:1.0: 4 ports detected
    [ 1.753841] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.753845] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 1.753852] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 4
    [ 1.753886] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0
    [ 1.754034] hub 4-0:1.0: USB hub found
    [ 1.754039] hub 4-0:1.0: 2 ports detected
    [ 1.754278] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 1.754282] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 1.754288] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 5
    [ 1.754321] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00003080
    [ 1.754470] hub 5-0:1.0: USB hub found
    [ 1.754475] hub 5-0:1.0: 2 ports detected
    [ 1.754707] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.754711] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.754717] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [ 1.754748] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003060
    [ 1.754886] hub 6-0:1.0: USB hub found
    [ 1.754890] hub 6-0:1.0: 2 ports detected
    [ 1.755113] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.755117] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.755123] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [ 1.755146] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003040
    [ 1.755279] hub 7-0:1.0: USB hub found
    [ 1.755284] hub 7-0:1.0: 2 ports detected
    [ 1.755501] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.755505] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.755511] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [ 1.755533] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003020
    [ 1.755672] hub 8-0:1.0: USB hub found
    [ 1.755677] hub 8-0:1.0: 2 ports detected
    [ 1.756794] ehci-pci 0000:00:1d.7: setting latency timer to 64
    [ 1.757624] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [ 1.757636] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 9
    [ 1.757651] ehci-pci 0000:00:1d.7: debug port 1
    [ 1.761541] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
    [ 1.761550] ehci-pci 0000:00:1d.7: irq 23, io mem 0x90b25000
    [ 1.770027] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.770236] hub 9-0:1.0: USB hub found
    [ 1.770242] hub 9-0:1.0: 6 ports detected
    [ 1.793425] hub 6-0:1.0: USB hub found
    [ 1.793434] hub 6-0:1.0: 2 ports detected
    [ 1.816762] hub 7-0:1.0: USB hub found
    [ 1.816772] hub 7-0:1.0: 2 ports detected
    [ 1.840122] hub 8-0:1.0: USB hub found
    [ 1.840131] hub 8-0:1.0: 2 ports detected
    [ 1.896698] usb 1-1: new high-speed USB device number 2 using xhci_hcd
    [ 1.911468] hub 1-1:1.0: USB hub found
    [ 1.911627] hub 1-1:1.0: 4 ports detected
    [ 2.064043] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.074751] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.096814] firewire_core 0000:05:05.0: created device fw0: GUID 009027000228f4cc, S400
    [ 2.520099] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.520116] ata4.01: SATA link down (SStatus 4 SControl 300)
    [ 2.520129] ata4.01: link offline, clearing class 3 to NONE
    [ 2.526834] ata4.00: ATAPI: HL-DT-ST BDDVDRW UH12NS30, 1.00, max UDMA/100
    [ 2.540115] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.540132] ata3.01: SATA link down (SStatus 4 SControl 300)
    [ 2.540234] ata4.00: configured for UDMA/100
    [ 2.547003] ata3.00: ATA-8: Hitachi HTS545025B9A300, PB2OC60F, max UDMA/133
    [ 2.547008] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.560344] ata3.00: configured for UDMA/133
    [ 2.560526] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
    [ 2.562299] scsi 3:0:0:0: CD-ROM HL-DT-ST BDDVDRW UH12NS30 1.00 PQ: 0 ANSI: 5
    [ 2.565388] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 2.565443] sd 2:0:0:0: [sda] Write Protect is off
    [ 2.565446] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.565469] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.569249] sr0: scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.569254] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.569537] sr 3:0:0:0: Attached scsi CD-ROM sr0
    [ 2.582466] sda: sda1 sda2
    [ 2.582770] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.763375] usb 6-1: new full-speed USB device number 2 using uhci_hcd
    [ 3.186725] usb 7-1: new full-speed USB device number 2 using uhci_hcd
    [ 3.373997] hidraw: raw HID events driver (C) Jiri Kosina
    [ 3.384911] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input2
    [ 3.384942] usbcore: registered new interface driver usbhid
    [ 3.384944] usbhid: USB HID core driver
    [ 3.389375] input: Logitech Unifying Device. Wireless PID:4024 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.2/0003:046D:C52B.0003/input/input0
    [ 3.389518] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-0000:00:1d.1-1:1
    [ 3.956744] usb 8-1: new low-speed USB device number 2 using uhci_hcd
    [ 4.193021] input: HID 05a4:9881 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input1
    [ 4.193111] hid-generic 0003:05A4:9881.0005: input,hidraw2: USB HID v1.10 Keyboard [HID 05a4:9881] on usb-0000:00:1d.2-1/input0
    [ 4.323187] input: HID 05a4:9881 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input2
    [ 4.323310] hid-generic 0003:05A4:9881.0006: input,hidraw3: USB HID v1.10 Mouse [HID 05a4:9881] on usb-0000:00:1d.2-1/input1
    [ 11.876733] bio: create slab <bio-1> at 1
    [ 12.881119] bio: create slab <bio-1> at 1
    [ 13.707370] PM: Starting manual resume from disk
    [ 13.707375] PM: Hibernation image partition 254:2 present
    [ 13.707377] PM: Looking for hibernation image.
    [ 13.707685] PM: Image not found (code -22)
    [ 13.707689] PM: Hibernation image not present or could not be loaded.
    [ 14.046090] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [ 14.787445] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 14.788676] systemd[1]: Set hostname to <HTPC-Arch>.
    [ 15.226797] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 15.226858] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 15.226873] systemd[1]: Starting Remote File Systems.
    [ 15.227011] systemd[1]: Reached target Remote File Systems.
    [ 15.227023] systemd[1]: Expecting device sys-subsystem-net-devices-enp0s25.device...
    [ 15.227118] systemd[1]: Starting Delayed Shutdown Socket.
    [ 15.227240] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 15.227251] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 15.227365] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 15.227375] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 15.227491] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 15.227501] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 15.227623] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 15.227662] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 15.227875] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 15.227893] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 15.227935] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 15.227945] systemd[1]: Starting Paths.
    [ 15.228037] systemd[1]: Reached target Paths.
    [ 15.228050] systemd[1]: Starting Journal Socket.
    [ 15.228187] systemd[1]: Listening on Journal Socket.
    [ 15.249416] systemd[1]: Started Set Up Additional Binary Formats.
    [ 15.262084] systemd[1]: Starting Apply Kernel Variables...
    [ 15.262799] systemd[1]: Starting Create static device nodes in /dev...
    [ 15.263427] systemd[1]: Mounting Huge Pages File System...
    [ 15.263983] systemd[1]: Starting Setup Virtual Console...
    [ 15.264564] systemd[1]: Mounting POSIX Message Queue File System...
    [ 15.265156] systemd[1]: Mounting Debug File System...
    [ 15.280316] systemd[1]: Started Load Kernel Modules.
    [ 15.280348] systemd[1]: Mounting Configuration File System...
    [ 15.280921] systemd[1]: Mounted FUSE Control File System.
    [ 15.280939] systemd[1]: Starting Journal Service...
    [ 15.281676] systemd[1]: Started Journal Service.
    [ 15.281761] systemd[1]: Starting udev Kernel Socket.
    [ 15.281891] systemd[1]: Listening on udev Kernel Socket.
    [ 15.281945] systemd[1]: Starting udev Control Socket.
    [ 15.282059] systemd[1]: Listening on udev Control Socket.
    [ 15.282117] systemd[1]: Starting udev Coldplug all Devices...
    [ 15.282675] systemd[1]: Starting Encrypted Volumes.
    [ 15.282783] systemd[1]: Reached target Encrypted Volumes.
    [ 15.282802] systemd[1]: Expecting device dev-disk-by\x2duuid-0318dc88\x2d9059\x2d4a62\x2dbcff\x2d33265de192a4.device...
    [ 15.282920] systemd[1]: Started File System Check on Root Device.
    [ 15.282933] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 15.283591] systemd[1]: Mounting Temporary Directory...
    [ 15.420998] systemd[1]: Expecting device dev-disk-by\x2duuid-53882be2\x2d6e5d\x2d4f81\x2d8336\x2d8115b139229a.device...
    [ 15.422283] systemd[1]: Expecting device dev-disk-by\x2duuid-a510d99d\x2dd043\x2d415c\x2d9357\x2d87584ac75ce0.device...
    [ 15.753587] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
    [ 15.847848] systemd-udevd[185]: starting version 204
    [ 16.644359] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 16.644369] ACPI: Sleep Button [SLPB]
    [ 16.644450] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 16.644454] ACPI: Power Button [PWRF]
    [ 16.751410] pps_core: LinuxPPS API ver. 1 registered
    [ 16.751415] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
    [ 16.808340] media: Linux media interface: v0.10
    [ 16.812148] Linux video capture interface: v2.00
    [ 16.820027] PTP clock support registered
    [ 16.833228] ACPI: Requesting acpi_cpufreq
    [ 16.874833] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [ 16.874837] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
    [ 16.875034] e1000e 0000:00:19.0: setting latency timer to 64
    [ 16.875118] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    [ 16.875143] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
    [ 16.914814] saa7164 driver loaded
    [ 16.916507] CORE saa7164[0]: subsystem: 0070:8851, board: Hauppauge WinTV-HVR2250 [card=7,autodetected]
    [ 16.916513] saa7164[0]/0: found at 0000:03:00.0, rev: 129, irq: 17, latency: 0, mmio: 0x90000000
    [ 17.050022] saa7164_downloadfirmware() no first image
    [ 17.050682] cfg80211: Calling CRDA to update world regulatory domain
    [ 17.051569] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw)
    [ 17.187584] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:78:69:22
    [ 17.187590] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
    [ 17.187615] e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF
    [ 17.187944] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPE0 1 (20130328/utaddress-251)
    [ 17.187951] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 17.187976] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 17.448874] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2561, rf: 0003, rev: 000c
    [ 17.481174] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 17.580464] saa7164_downloadfirmware() firmware read 4019072 bytes.
    [ 17.580469] saa7164_downloadfirmware() firmware loaded.
    [ 17.580471] Firmware file header part 1:
    [ 17.580473] .FirmwareSize = 0x0
    [ 17.580474] .BSLSize = 0x0
    [ 17.580475] .Reserved = 0x3d538
    [ 17.580477] .Version = 0x3
    [ 17.580479] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072
    [ 17.580485] saa7164_downloadfirmware() FirmwareSize = 0x1fd6
    [ 17.580486] saa7164_downloadfirmware() BSLSize = 0x0
    [ 17.580488] saa7164_downloadfirmware() Reserved = 0x0
    [ 17.580489] saa7164_downloadfirmware() Version = 0x1661c00
    [ 17.621991] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
    [ 17.694365] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input5
    [ 17.694422] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
    [ 17.694477] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
    [ 17.694908] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 17.694980] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
    [ 17.707929] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [ 17.907140] microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa3
    [ 17.907184] microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa3
    [ 17.907251] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 17.993729] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8
    [ 18.040563] coretemp coretemp.0: Using relative temperature scale!
    [ 18.040576] coretemp coretemp.0: Using relative temperature scale!
    [ 18.100383] gpio_ich: GPIO from 206 to 255 on gpio_ich
    [ 18.112063] iTCO_vendor_support: vendor-support=0
    [ 18.298748] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 18.298795] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
    [ 18.298917] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 18.520198] systemd-udevd[206]: renamed network interface wlan0 to wlp5s3
    [ 18.624855] Adding 10485756k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:10485756k FS
    [ 18.730190] systemd-udevd[200]: renamed network interface eth0 to enp0s25
    [ 20.673933] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    [ 20.681617] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    [ 20.855405] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 21.795385] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
    [ 21.896764] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
    [ 21.896898] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
    [ 22.415792] systemd-logind[284]: Watching system buttons on /dev/input/event4 (Power Button)
    [ 22.415885] systemd-logind[284]: Watching system buttons on /dev/input/event3 (Sleep Button)
    [ 22.618057] input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input9
    [ 22.619178] input: Xbox Gamepad (userspace driver) #2 as /devices/virtual/input/input10
    [ 24.390026] saa7164_downloadimage() Image downloaded, booting...
    [ 24.493363] saa7164_downloadimage() Image booted successfully.
    [ 24.493397] starting firmware download(2)
    [ 26.916146] systemd-logind[284]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
    [ 27.103368] saa7164_downloadimage() Image downloaded, booting...
    [ 29.170040] saa7164_downloadimage() Image booted successfully.
    [ 29.170074] firmware download complete.
    [ 29.217377] tveeprom 9-0000: Hauppauge model 88061, rev C4F2, serial# 8524019
    [ 29.217381] tveeprom 9-0000: MAC address is 00:0d:fe:82:10:f3
    [ 29.217383] tveeprom 9-0000: tuner model is NXP 18271C2_716x (idx 152, type 4)
    [ 29.217386] tveeprom 9-0000: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
    [ 29.217388] tveeprom 9-0000: audio processor is SAA7164 (idx 43)
    [ 29.217390] tveeprom 9-0000: decoder processor is SAA7164 (idx 40)
    [ 29.217392] tveeprom 9-0000: has radio, has IR receiver, has no IR transmitter
    [ 29.217394] saa7164[0]: Hauppauge eeprom: model=88061
    [ 29.865010] tda18271 10-0060: creating new instance
    [ 29.869343] TDA18271HD/C2 detected @ 10-0060
    [ 30.094538] DVB: registering new adapter (saa7164)
    [ 30.094548] saa7164 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
    [ 30.383509] tda18271 11-0060: creating new instance
    [ 30.387943] TDA18271HD/C2 detected @ 11-0060
    [ 30.457571] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
    [ 30.457682] e1000e 0000:00:19.0 enp0s25: Link Speed was downgraded by SmartSpeed
    [ 30.457685] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
    [ 30.457715] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
    [ 30.612017] tda18271: performing RF tracking filter calibration
    [ 32.898604] tda18271: RF tracking filter calibration complete
    [ 32.901771] DVB: registering new adapter (saa7164)
    [ 32.901779] saa7164 0000:03:00.0: DVB: registering adapter 1 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
    [ 32.902195] saa7164[0]: registered device video0 [mpeg]
    [ 33.133183] saa7164[0]: registered device video1 [mpeg]
    [ 33.343857] saa7164[0]: registered device vbi0 [vbi]
    [ 33.343959] saa7164[0]: registered device vbi1 [vbi]
    [ 37.832133] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
    [ 38.787420] EXT4-fs (dm-1): re-mounted. Opts: data=ordered,commit=0
    [ 39.333649] EXT4-fs (dm-3): re-mounted.

    I seemed to have solved this by following the advice in the Gentoo wiki:
    https://wiki.gentoo.org/wiki/Radeon#Audio_over_HDMI
    pcm.!default {
    type plug
    slave.pcm "hdmi"
    Those four lines in my /etc/asound.conf work. I'm not sure what the difference is between specifying "hdmi" vs the hardware device "hw:0,3".
    I still get no sound with `aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav` however, `aplay /usr/share/sounds/alsa/Front_Center.wav` works now. `aplay -D hdmi /usr/share/sounds/alsa/Front_Center.wav` results in an error/warning:
    Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
    aplay: set_params:1239: Channels count non available

  • HDMI Audio not working on Q190 (along with all higher level Audio Formats)

    Help, I have been given the run around via support, I cannot get the HDMI audio to work with my Pioneer Surround Sound, only the Intel display audio shows in control panel (Win 8 X64) and the RealteK S/P Dif port and it is not capable of supporting 7.1 sound or bitstreaming or DTS, Dolby HD, Etc. Tec support appears not capable of fixing the issue and wanted to send me to software support and pay. I have only had the machine for 4 days and it has never supported higher level sound.
    Every other device I have (had or currently) connected to the receiver works just fine. I have to figure this out or return the machine, the audio is the most important aspect for me. Besides when you advertise 7.1 support the machine you sell should be able to do it.

    Hey guys,
    I have had this Q190 with the Celeron CPU since last week and I am using XBMC Frodo and the HDMI is connected to my AVR Onkyo TX-NR809 and from the Onkyo to the TV. And the sound is 7.1 with PLIIZ. It works fine. I think it may be some driver problem because Realtek Audio which is in the Q190 works fine with the Win8 preinstalled. Realtek is kind of bad with driver because I lost my wifi after upgrading to Win 8.1. After a few days with no wifi, I found out that the driver was bad, yes it was a Realtek wifi driver but posted by Lenovo for W 8.1.
    I have another friend who also just bought the Q190 and he reported no audio problem so I think it is just a matter of trouble shooting the drive and configuration. I do love the form factor of the Q190.

  • HOW TO: HDMI Audio Output for Zotac Media Box with nVidia ION :)

    I've been fighting with my recently purchased Zotac mini-PC for about 2 months now trying to get the HDMI audio output to work. I tried extensive modifications of /etc/asound.conf, different versions of ALSA, and even OSS without success. I've finally succeeded using ALSA and GNOME.
    First I installed ALSA according to the Arch wiki.
    Next I verified that ALSA detected my sound card(s):
    cat /proc/asound/cards
    0 [Intel ]: HDA-Intel - HDA Intel
    HDA Intel at 0xfe9fc000 irq 28
    1 [NVidia ]: HDA-Intel - HDA NVidia
    HDA NVidia at 0xfcf7c000 irq 18
    Next I checked which sound card had the HDMI jack:
    aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: NVIDIA HDMI [NVIDIA HDMI]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: NVIDIA HDMI [NVIDIA HDMI]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: NVIDIA HDMI [NVIDIA HDMI]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    From these two commands, I concluded that I have 2 sound cards (important later on) and that my HDMI sound card was card 1 (NVidia) and that it had 4 possible devices (3,7,8, and 9). To determine which device must be used, I ran the following command for each device (for example, to test card X and device Y, use' plughw:X,Y'):
    aplay /usr/share/sounds/alsa/Front_Center.wav -D plughw:1,7
    Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
    I tried each device and got the best sound from device 7 (8 and 9 also worked, device 3 gave static...).
    Now, since I had 2 sound cards, I needed to change the default ALSA device. My default ALSA device was card 0 (the Intel card), which wasn't plugged in, so I needed to change the default card to be card 1 (the HDMI card). After reading the ALSA FAQ, I found that modifying /usr/share/alsa.conf should work, though modifying /etc/asound.conf should have also worked. For whatever reason, I couldn't get my modifications to /etc/asound.conf to work, so I edited /usr/share/alsa/alsa.conf. In the  "# defaults" section I replaced the following:
    defaults.ctl.card NVidia
    defaults.pcm.card NVidia
    defaults.pcm.device 7
    I opted to use the key NVidia rather than the card number (1) since I've read in numerous places that the card index can change unexpectedly after a reboot/update. The key can be checked with cat /proc/asound/cards as shown above.
    After this, I reloaded ALSA (/etc/rc.d/alsa restart) and verified that the sound worked through the default channel:
    aplay /usr/share/sounds/alsa/Front_Center.wav -D default
    Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
    Finally, I rebooted, chose the HDA NVidia (ALSA Mixer) option from gnome-volume-control, and loaded a movie in gnome-mplayer. I was pleased to hear crystal clear sound with functioning volume control
    I Hope this helps someone else, I found it very hard to piece together how to diagnose and resolve this problem. Here are some of the resources I found useful:
    Arch Wiki ALSA Page
    ALSA FAQ for how to change default sound card
    ALSA FAQ
    XBMC Troubleshooting for ION HDMI

    @sprince09 Can you hear sound through HDMI when you run aplay /usr/share/sounds/alsa/Front_Center.wav -D plughw:1,7 ?
    (8 and 9 also worked, device 3 gave static...)
    - what does it mean? How do you know that they are working?
    What options do you have for snd_hda_intel in /etc/modprobe.d/ ?  Can you play the following:
    mplayer -ao alsa:device=hw=1,7 file.wav
    BTW, can you hear sound form video files in xine? If yes, can you post your ~/.xine/config ?
    Last edited by knedlyk (2012-01-21 23:41:57)

  • Satellite P75-A7100 No HDMI Audio Help Please!

    Had to make device dual boot due to work circumstances with 7 32bit on one side and 8.1 64 bit on the other side.  Read the posts and lots of tinkering with but still no audio out on the HDMI on either sides.  Primarily looking to accomplish on the 8.1 side.  Went through thre reccomended driver install directly from the TOSHIBA page in the order reccomended:
    1. Chipset
    2. HD4600
    3. Conexant Audio Driver
    No luck with the video being fine and no audio.  Not recognizing the audio connection in the drivers portion even under disconnected and disabled devices.  
    Also downloaded latest HD4600 driver from intel and tried to manually install AUDIO portion but getting the windows Error 10 and not allowing.  From what I read that is the fix but no luck there.  
    Any suggestions or direction please?

    Satellite P75-A7100
    Downloads here.
    I don't really know anything about this. I stopped by because you didn't mention looking for the HDMI audio here.
       Control Panel > Sound > Playback tab
    If you don't see it there, right-click in that panel and make sure all devices are showing. I once needed to change the default device there in order to enable the HDMI sound.
    Just a a thought. If that's not your trouble, I can't help.
    -Jerry

Maybe you are looking for