T410s - USB Port Driver

Hi
I have a T410s (Type 2912-3AG) that has some kind of issue with the USB ports.
After starting W7 the USB posrts work fine, but if I disconnect any device that is connected to them it will then not reconnect.
Furthermore the computer is not able to shut down (everytime I have to keep the On/Off button pressed).
I would like to try to reinstall the Lenovo driver for the USB ports, can anybody help me finding the right driver?
Thanks for your help in advance.
Regards,
Giorgio

Hi and welcome to the forum!
Try the direct link:- Lenovo USB 2.0 Port Replicator with Digital Video v16.0.1 (I didn't experience any download issue).
Alternatively, you can copy the contents of the driver CD on a USB drive using another PC and then via it you can install the driver on your Edge.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Similar Messages

USB ports/drives in windows with boot camp?

Windows (explorer) in Boot Camp does not recognize any usb ports/drives on my new iMAC (mountain Lion). Got the MAC 6 days ago - installed a new windows 7 package using boot camp with the (optional) usb superdrive drive. I have reinstalled (repaired) the windows support software - no change. BTW, after installing windows 7 I downloaded all updates, 140+, my windows, os X, and boot camp are up to date. Any suggestions? Thanks........jam

Did you download and install teh Windows support software which includes all the necessary Windows drivers for your computer?

I think I have blown out my USB ports. Plugged eternal drive to USB port; drive also had an AC plug which I plugged in. Screen went white; unplugged external drive (both USB and AC plug). Restarted MAC Pro. Everything came back except USB ports

I think I have blown out my USB ports. Plugged in an external drive to USB, but drive also had an AC connection which I connected. Whole screen went white; unplugged external drive (both AC and USB) and shut down MacPro. Restarted and everything came back except access to USB ports. Have tried to reset PRAM and SMC. No success. Have I blown out the electronic circuitry to my USB ports?

Thanks for the response, but ironically enough, I feel really stupid after posting that because a couple minutes after posting that my DELL mouse started working again, but I honestly don't know how long that'll last. After it started working again, I tried switch which port it's plugged into again, and the other one (the one closest to me) still isn't working. If it stops working again (which it probably will), I'll definitely take it to the Apple Store. But, for some reason almost every time I take a device to the Apple Store, it fixes the problem itself when I get there, and then stops working after I leave (like just now.)
That's happened a couple times, like when my computer was heating up alot, and when my phone's sound kept shutting off by itelf.
Anyways, I want to keep this discussion up just because I know it'll stop working soon. But, yeah, I was planning on taking it to the Apple Store anyways, but I think the earliest I can is probably Saturday or Sunday, so I'll do that then.
Thanks for the response!
Scott

Usb ports driver error 37?

i am so frustrated. i have a hp dv5 1251 series and all the sudden the usb ports arent working. it seems to be a driver issue but when i reinstall it doesn't help. it's out of warranty so please help!

Hi:
Download and install the AMD chipset drivers from the link below. That should get the USB3 ports to work.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
Unfortunately, I can't help you with the internet problem.

T410 USB not working

Hi all,
I have some trouble with my T410 USB port. After finished some windows update (i'm using win-7 32 bit) and restart the laptop, suddenly one of USB port (located in the right near the DVD-drive with yellow color inside) doesn't work. I usually connect this USB port for my mouse.
Is there anyone can help me to solve this? I am not sure whether this is driver issues, or hardware problem.
Appreciate for response!

Hi,
if your T410 comes with an UMTS module (Gobi2k - WWAN) it's worth trying to update the Bootcode revision for Win7
http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-76520
It updates the Gobi2k Firmware on older shipments (before 09/2010) on later shipments this code should already be present.
It improves the USB Hub behaviour the Gobi2k is connected to, if you still use XP you have to leave version 3575 in place, but for W7 3599 (see link) is the right choice.
To see whether this might solve your issue, check the device manager to see whether the Gobi device is present or not.
I expect the USB hub missing altogether with the Gobi, hence only the right USB port and one of the left ports is not working (they are on the same bus as the Gobi)
Let me know the results - thanks
cYa ... Dirk©
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
As money not spent, won't make anyone richer
so knowledge not shared, won't make anyone wiser.
... and no, I'm not working for DELL

In Phone USB Port Drivers

Does anyone know how to reapir or re-install the USB port driver on the device itself? I was talking with a friend and based on the info and problem I have been having with my device (windows detects and shows the device as malfunctioning), it appears that these drivers are either possibly corrupt or have been lost. Either through a virus or bad software that doesn't work with the phone. It would mean the world if I could get a link to download these and try it. The bluetooth works fine. But I cannot update to firmware 3 until the USB is working.

One thing you can try is to delete the USB devices on your PC.
Depending on which version of windows you are running this would be done differently.
In XP you go to Control Panel->System->Hardware then Device Manager. Under "Universal Serial Bus" or other sub categories you may see a yellow question mark or a red exclamation mark next to a USB device, select it and hit Remove (Delete) select YES to remove the device. Now try to connect again the phone to see if it's recognized.
I had a few instances where once the computer creates a corrupted device it won't try to re-install the device but it recognizes the device as being the same and just sits there.
Be warned that I'm not liable if you delete something else or you damage your PC. Follow these instructions only if you know how to do these system settings in your PC.
You have been warned!
640K Should be enough for everybody
El_Loco Nokia Video Blog

Airport Extreme won't show the WD external hard drive I plugged into the USB port. How do I connect my external hard drive to my network?

I plugged in my WD external hard drive into my Airport Extreme via the USB port. The hard drive will not show up in the disk section in the airport utility... How do I hook an external hard drive up to the airport extreme? I have tried 2 different WD hard drives. I must be missing something!!!
Thanks!

To be recognized by the AirPort for sharing, the WD HDD has to be formatted in either HFS+ (ideal) or FAT32. The easiest way to format the HDD is to use the Disk Utility in OS X.

How can I get two hard drives connected to the Airport Extreme. There's only 1 USB port.

I believe I want to use TWO USB Hard Drives with my Airport Extreme, but it seems there is only 1 USB port.
I am currently using that USB port for my backup external hard drive (works with Time Machine). But now I have decided I want a common hard drive for music, photos, etc. for the two Macs in my home to share. I read that you do that via the same port.
What should I do? Is there a way to use 2 hard drives - a common shared and one for time machine?
Please advise and thank you!

singer777 wrote:
I believe I want to use TWO USB Hard Drives with my Airport Extreme, but it seems there is only 1 USB port.
Use a (powered) USB hub.
I am currently using that USB port for my backup external hard drive (works with Time Machine).
I hate to have to tell you this, but backing-up that way is unreliable and not supported by Apple. See: Using Time Machine with an Airport Extreme Air Disk.

My ipod will not stay connected to my computer. When first plugged into the usb port, I can see it as a drive. Within seconds it disappears. If I look in the devices area, I can see it but it has a yellow triangle with an exclamation point beside it.

When I connect my ipod to a usb port on my computer, I can see it in my computer as a drive for a few seconds and then it disappears. It can be seen under devices but as a yellow triangle with an exclamation point in it. If I run trouble shoot, it states windows is disconnecting this device.
I can see it in itunes as a device. However, this is a brand new computer, running windows 7. My last one bit the dust in mid use. I want to save the songs on my ipod and to do that I believe I need to be able to see the files on the ipod.
Any help would be greatly appreciated.

Great Troubleshooting on your own so far!. (If you got 2 PC and 2 iPod would be much easier, some of the people in this community has more than 2 of each.)
Hope you did not connect it to a USB Hub, the sync cable must be plug in directly to a USB2 port at the back of the Desktop Computer.
If you have a spare Notebook, with iTunes, connect it to the Notebook, to check if the iPod is working or hung.
Can you iPod run and play songs, when disconnected from the PC? (Sorry, for just asking the obvious)
Anyway, just hard reset your iPod, so that we can start from scratch
1. if your iPod is hung, reset it by pressing Menu and Center button for at least 10 secs till the Apple logo, comes on. (this won't delete your songs in the iPod, if they are not corrupted))
2. Connect it back to your Notebook or Desktop.
if your iPod screen is dead, try charging the battery by connecting it to another computer. if it doesn't connect to successfully to another computer, it may need servicing.
Good luck!

USB ports and Pocket Drive Unrecognized (IQ-775)

Hi all:
With no warning, the two front USB ports stopped functioning (rear ones are OK) and the Pocket Drive is no longer recognized. Worked one day, did not work the next. This happened simultaneously, so I assume it is related as the Pocket Drive is a USB device.
There is power to all of these ports, as when I plug something into them, or insert the pocket drive, the power lights come on, but the system does not show them. The pocket drive no longer shows on the folder tree, and if I remove it and connect it to a working USB port, it reports 'unknown device', tries to load a driver and fails. The Windows message says, "if this continues to occur, replace device" Easy for them to say!! I have used the Disk Manager, but it too cannot find the pocket drive anymore. Interestingly, the Pocket Drive works fine on other computers as a portable drive and is recognized as "HP Pocket Drive", so there is noting wrong with the device.
The pocket drive has disappeared from the Device Manager, and all of the USB ports show are 'working properly', but of course we don't know which are which or even if the front ports are listed as they are not identified
If anyone knows how to repair this problem or has had similar, I would be grateful. My IQ-775 is out of warranty so the repair is on me. I don't know how USB ports 'fail', but I am sure it is a 'fixable' problem.
The machine is steadily destroying itself, just sitting on the desktop. The WLAN adapter went first (on both of my HP machines), then the display drivers, then the Lightscribe, now the USB ports. Planned obsolescence at its finest!
Thanks
DN

Cooper, it's NOT going to be all the devices that are having problems, the OP's issues are related to the USB hub/ports not working properly. Reinstalling drivers for all the USB devices including the Pocket drive that doesn't use any, would be an exercise in futility.
OP, try removing the USB root hubs in question in Device manager and letting the OS put them back on a reboot, that has been known to resolve issues like this, you can also go into the BIOS and do a "reset to default" I know that sounds strange, but it can resolve weird USB issues too.

Moved drive to USB Port on Time Capsule and TM no longer sees backups

I moved my FireWire attached HD from a direct attachment to my Mac Pro to attached via the USB port on my Time Capsule. Time Machine now wants to start over, and does not see the previous backups.
The destination drive name did not change, other than the added NAS address.
Is there a way to force TM to use the previous backup set incrementally instead of starting over?
Thx

SRJaynes wrote:
I moved my FireWire attached HD from a direct attachment to my Mac Pro to attached via the USB port on my Time Capsule.
unfortunately, it's not that simple. TM treats backups to directly attached drives differently vs. networked ones.
see this for more information and possible solutions: http://web.me.com/pondini/Time_Machine/18.html
JGG

Expansion base USB ports & hard drive no longer recognized

I have an HP dv5000 laptop and the xb2000 expansion base with a built-in hard drive in the base. I routinely undock the laptop while it's running and plug it back in again and have no problems. Yesterday, I undocked as usual, but then shut the laptop down while it was undocked. Then I put it back in the expansion base and booted up again. The problem is that now I can no longer see the hard drive in the expansion base and the USB ports for the expansion base will also not work.
The really sad part is that this is a new expansion base because the same thing happend about a month ago, but I thought it was a hardware problem and just bought a new base.
Can anyone please help me get my laptop to see the hard drive in the base and also get the USB ports working again as well?
Thanks,
OneTrader

I tried to post a reply on a computer with Internet Explorer 8 RC1. My CPU would always be 100% busy as soon as I hit the Reply button.
I complained to HP Support and was told that this forum is not compatible with IE 8. So, I am now on a computer with IE 7. UPDATE: I just executed C:\WINDOWS\ie8\spuninst\spuninst.exe and my HP Notebook reverted back to IE 7 without any problems so far. I am now able to edit this reply (without my CPU being 100% busy)!
I had exactly the same problem with all USB Ports and the optional 160GB USB Hard Drive being nonfunctional, immediately after Microsoft
Update (Custom) finished installing recommended driver "Cypress - Other hardware - HX2LP Kit (3.03.0000.2).
The device appeared in Device Manager, under Universal Serial Bus Controllers, as "HX2LP Kit (3.03.0000.2)". I uninstalled the device but
after a restart it was there again.
I executed System Restore to a date before the Cypress drivers were downloaded and installed.
All xb2000 USB Ports, the USB Hard Drive and Sound now work as before. I have been using a mouse and printer plugged into the xb2000 today. Also,
I completed a Windows Live OneCare, complete backup, to the Hard Drive in the xb2000 base, today.
The one thing that I hate about my xb2000 is that the Hard Drive keeps spinning as long as the Hard Drive Power Adaptor is connected to
the base. I use "Safely Remove Hardware" on the task bar to safely remove the USB drive and then disconnect the Power Adaptor from the base. If I leave the disk spinning, after a few minutes I get a very loud clicking sound which sounds like something inside the drive is beating on the hard drive chassis. Maybe it is the arm which holds the heads. Complaints to HP have not resulted in a solution to these aggravations.
Message Edited by iwampfler on 02-27-2009 11:45 PM

HP M8100N pavilion usb ports no longer recognizes external drive

My Paviilion M8100N USB ports no longer recognizes my external drives. I have VISTA premium operating system.

The entire document and tutorial can be found here.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board. is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board. is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

jrburrows wrote:
Ok, fair enough. But since Job's death - Apple's control on leaks has been terrible. I got the new iPhone, and I like it - but it hasn't made nearly as big as an impression as previous ones. Because of the vast ammount of leaks. With the iPad mini leaks, it's 99% sure to come out next week.
Apple uses many manufacturers and it's massive also websites prefer to report on Apple whether true or false because it brings more hits.
Amd by "others" I meant other people on iPads - not other devices/manufacturers. It's possible to do so, I just want to know how. I honestly don't think we'll ever be in a Post-PC era until all tablets allow us to use USB in the way computers do.
No, USB is not the future, you missed the memo about cloud and wireless computing?

HT2421 If I attach a hard drive to the USB port, can I access it from the wired network, while simultaneously creating a separate wifi network with NO access to the hard drive?

I already have a wireless network (call it Network A) with connectivity to various wired and wireless devices. I have a USB hard drive that I directly attach to my MacBook Air. I use it for Time Machine backups and general storage. I would like to move this drive to an AirPort Extreme. I would like to continue to be able to reach it via Network A, but also use the AirPort to create a guest Network (Network B). I don't want the guest network to access the hard drive.
Now, I know I can plug a hub into the USB port and put (I hear up to 3) hard drives on it. Can I determine which ones are accessable by Network A, and by Network B?
Bonzo...

Several things to consider.
You cannot create a wireless network for guests if the AE is bridged. It has to be the main router in the network.
You cannot use the existing TM backups on the USB drive.. if you plug into a network it will need to be wiped.. and only AC model can produce reliable TM backups.. the earlier models are not reliable for TM backups.
See http://pondini.org/TM/Airport.html
These two factors alone may be enough to make you reconsider.
If you can create a guest network.. and you can overcome the limitations of airdisks.. then any person on the guest network should not be able to access the disk drive.. but if you wish to go ahead Bob Timmons might be able to confirm it.. I stay away from USB drives on routers.. I do not and will not use a router as a NAS.. it is underpowered and simply unsuitable long term.. a cheap single disk NAS is many times faster.. more reliable.. and has a marvellous thing called backup.. no USB disk or even internal disk in a TC can back itself up. .nor can TM backup network drives.. so any data you store on a USB drive is going to be gone one day.. unless you go to great lengths to back it up .. to where.. another USB drive plugged into another router somewhere.. the definition of slow.. should be copying files between two usb drives in an apple network using wireless. You will experience new levels of pain and suffering.. likened to the belly of the Sarlacc.

T410s - USB Port Driver

Similar Messages

Maybe you are looking for