T410s - Windows 7 64-bit - Fonts Not Shown

I received my T410s (2910 CTO) yesterday - Core i5 with integrated graphics, 4GB RAM, 250GB 1.8" hard drive, Windows 7 Professional 64-bit. I proceeded to install various apps from Microsoft Office and Adobe CS5. Installation went fine, programs started okay. As soon as I saw the extremely long list of fonts in Word, I wanted to remove as many of them fonts as I possibly could.
Brought up Fonts panel. Only 10 fonts -- yes, 10 puny, ancient, bitmap fonts. What? Excuse me, but I saw many fonts in Microsoft and Adobe apps. The fonts are indeed there, but they are simply not shown -- no Segoe, no Cambria, no Corbel, no Constantia, not even Arial and Times New Roman, nothing.
I got nervous and decided to restore the system back to the starting point. No luck. Same problem.
Today, I used the ThinkPad Toolbox to create the 3 factory-recovery DVDs from the Lenovo partition. Rebooted from the DVDs to rebuild C drive. Set up the system and created my account. Windows 7 came up fresh. I went straight to the Fonts panel to check. Horror -- the same 10 bitmap fonts.
What is going on? The Lenovo factory-installed Windows 7 has problems showing fonts? What should I do now?
Please help. Thanks in advance.

create new folder on desktop, copy all the fonts to the folder, then right click the font files and select install.
http://www.microsoft.com/typography/organizingfonts.mspx

Similar Messages

HT4796 I am having trouble completing the the migration assistant process. My PC (Vista windows, 64 bit), will not go to the step where I enter a passcode from my MAC. Any suggestions?

I am having trouble completing the the migration assistant process. My PC (Vista windows, 64 bit), will not go to the step where I enter a passcode from my MAC. Any suggestions?

Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

[Workaround available] Some ttc fonts not shown in Libreoffice

This is a prolonged (for more than 1 years maybe) issue for me: My LibreOffice installation does not recognize any ttc fonts. (And I cannot bear this anymore for some reason)
ttc fonts are merely a comination of two or more ttf fonts. I have installed both ttf and ttc fonts in /usr/share/fonts/TTF directory either by copying them into the directory and run `fc-cache -fv` or by installing those font packages in repositories. But LibreOffice can only recognize those ttf fonts, not ttc ones.
* I have tried both "libreoffice-writer" and "libreoffice-fresh" packages from official repositories, with "~/.config/libreoffice" deleted.
* I have no "~/.font*" or "~/.confg/fontconfig" directory.
* Those ttc fonts I installed CAN be recognized in any other "Select font" dialog.
* I tried Abiword and it CAN also recognized those ttc fonts.
* Not a single ttc font, but all the ttc fonts cannot be recognized by LibreOffice.
Any ideas?
UPDATE:
I found out that some of the ttc fonts can actually be recognized by LibreOffice, others, however, can not.
$ find /usr/share/fonts -name *.ttc
/usr/share/fonts/TTF/msgothic.ttc # NO
/usr/share/fonts/TTF/mingliub.ttc # NO
/usr/share/fonts/TTF/msjh.ttc # NO
/usr/share/fonts/TTF/batang.ttc # YES
/usr/share/fonts/TTF/ukai.ttc # YES
/usr/share/fonts/TTF/simsun.ttc # NO
/usr/share/fonts/TTF/uming.ttc # YES
/usr/share/fonts/TTF/msyhl.ttc # NO
/usr/share/fonts/TTF/msjhl.ttc # NO
/usr/share/fonts/TTF/mingliu.ttc # NO
/usr/share/fonts/TTF/meiryob.ttc # NO
/usr/share/fonts/TTF/msmincho.ttc # NO
/usr/share/fonts/TTF/msyh.ttc # NO
/usr/share/fonts/TTF/meiryo.ttc # NO
/usr/share/fonts/TTF/gulim.ttc # YES
/usr/share/fonts/TTF/msyhbd.ttc # NO
/usr/share/fonts/TTF/msjhbd.ttc # NO
/usr/share/fonts/wenquanyi/wqy-microhei/wqy-microhei.ttc # YES
Here is all the ttc fonts I have installed. "ukai.ttc" is from ttf-arphic-ukai package, and "wqy-microhei.ttc" is from wqy-microhei package. All the others come from aur/ttf-ms-win8. I copied these fonts from a Windows 8.1 installation media and the integrity check is passed.
Only five of them (those with "YES" marks) are listed in LibreOffice. The others are not.
I am very confused.
UPDATE 2:
It seems that this is a prolonged bug in LibreOffice. I modified the PKGBUILD file of aur/ttf-ms-win8, spliting those ttc files into ttf files.
Last edited by wzyboy (2014-06-27 06:36:11)

reflexing wrote:
wzyboy wrote:
reflexing wrote:
As a maintainer of ttf-ms-win8 package, I needed exactly that information, was too lazy to check it by myself. I think I add extracting of those ttc's soon.
You just added them to 'ttcs_to_extract', don't you?
Yes, here is the modified part:
Nice, that's what I wrote that function for! I will update package based on your findings soon.
Wow! I love your function, too!
However, please note, that spliting those CJK fonts will result in very large package sizes. A typical Chinese ttc font is about ~35 MiB and contains 2 - 4 font weights (styles), so there will be 2 - 4 ttf files, which have a total size of ~150 MiB or more.
49M ttf-ms-win8-6.3.9600.17050-1-any.pkg.tar
163M ttf-ms-win8-japanese-6.3.9600.17050-1-any.pkg.tar
70M ttf-ms-win8-korean-6.3.9600.17050-1-any.pkg.tar
161M ttf-ms-win8-zh_cn-6.3.9600.17050-1-any.pkg.tar
254M ttf-ms-win8-zh_tw-6.3.9600.17050-1-any.pkg.tar
These are the packages my modified PKGBUILD generated. You can see how large they are compared to those ttc versions. And the only reason to split ttcs is that LibreOffice has a bug recognizing them. (Other programs recognize ttcs well)

ITunes 10.6.3 for Windows (64 bit) will not start

When I upgraded to this version of itunes, the computer states that it installed correctly, but the itunes will not start. The following is the error report message:
Problem signature:
Problem Event Name:        BEX
Application Name:        iTunes.exe
Application Version:        10.6.3.25
Application Timestamp:        4fd16377
Fault Module Name:        QuickTime.qts_unloaded
Fault Module Version:        0.0.0.0
Fault Module Timestamp:        4ea5d609
Exception Offset:        68121040
Exception Code:        c0000005
Exception Data:        00000008
OS Version:        6.1.7601.2.1.0.256.48
Locale ID:        1033
Additional Information 1:        0a9e
Additional Information 2:        0a9e372d3b4ad19135b953a78882e789
Additional Information 3:        0a9e
Additional Information 4:        0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Any help is appreciated,
Rick

I've also got a similar problem. I upgraded yesterday & today I find (mainly with previously purchased tracks) that iTunes only playes about 51sec of a track. The whole track plays when using "Quicktime" but this doesn't help me when I'm trying to put together a playlist.
Can anyone out the help?

ITunes 10.1.1 for Windows (64-bit) Does Not Run After Installation

I recently upgraded my laptop to Windows 7 and downloaded the 64-bit installer (iTunes64Setup). Although I recieve the notice that it was installed, when I start it up, I receive the "iTunes Library.itl cannot be read..." error message whenever I try to start it.
I have uninstalled the program, deleted the original setup file (iTunes64Setup), downloaded it again and re-installed it twice with no success.
Is there something I am doing wrong? Any assistance is greatly appreciated.
Thanks,
John

Finally got it installed and running.

Windows 8.1 update not shown after factory reset

I had the windows 8.1 update shown on my app store but due to some problems i factory reset the laptop. when i opened it after the restore i was unable to find the update on my store. Rather it shows 96 apps to be updated

Hi,
If you want to install Windows 8.1 Update 1, there are two requirements:
•Windows 8.1 is a prerequisite (vs Windows 8 RTM)
•KB2919442 is a pre-requisite update - released in March 2014 – you'll need this before 2919355 will be recognized
http://support.microsoft.com/kb/2919442/en-us
Alex Zhao
TechNet Community Support

Itunes 10.3.1 for windows (64-bit) will not load/ start when icon is clicked. What shall I do?

Please help. I've uninstalled and reinstalled 4 days ago and it worked for a few days and now it is not working again even with uninstalling and reinstalling. Thanks in advance for your help.

Hi, thanks for replying - I've been reading you other posts and that lead to following the instructions at http://support.apple.com/kb/HT1923 and now itunes seems to work (at least for now and hopefully for a while). But yes my quicktime was working but the itunes failed to launch.
Thanks again!

SQL*PLUS 32 Bit Client needed for Windows 64 Bit

Hi,
I have got a 64 Bit Windows OS and an Oracle 11.
With 32 Bit Applications ( Crystal Reports) I can not run SQL NET Thick, SQL NET Thin and JDBC.
Oracle 32 Bit Installation is Missing.
Oracles "Instant Client Downloads for Microsoft Windows (32-bit)" will not do it.
http://www.oracle.com/technetwork/topics/winsoft-085727.html
What else to use ?
Thank You
Martin Sautter

Martin.Sautter wrote:
Hi,
i used:
instantclient-basic-nt-11.2.0.2.0.zip (32BitClient)
instantclient-sqlplus-nt-11.2.0.2.0.zip.
I did not find an "old", "classic" SQL*PLUs client.What does that mean exactly, classic client?
Did you unzip the ic sqlplus .zip (the one listed) in the same dir as ic basic?
After dezipping waht than ?
No installer, nothing ...That's the beauty of Instant Client, just unzip or move a few files, set PATH if needed, and you have client libraries all "installed" and ready.
>
You can give advice ?Generally, required lib files are (n Windows) oci.dll, oraociicusN.dll or oraocieiN.dll (N= e.g. 11). Then for Sql*plus add orasqlplusicN.dll and the .exe from ic-sqlplus package.
C:\Users\Test\Ora-IClite>dir
Volume in drive C is OS
Volume Serial Number is 6E8F-186A
Directory of C:\Users\Test\Ora-IClite
2011-12-16 09:30    <DIR>          .
2011-12-16 09:30    <DIR>          ..
2011-08-31 11:39                38 ldap.ora
2011-07-30 12:21           683 008 oci.dll
2011-07-30 12:21        44 153 856 oraociicus11.dll
2011-07-30 12:21         1 501 696 Orasqlplusic11.dll
2011-07-30 12:21           869 376 sqlplus.exe
C:\Users\Test\Ora-IClite>.\sqlplus user@'localhost/xe'
SQL*Plus: Release 11.2.0.2.0 Production on Fri Dec 16 09:34:13 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter password:Edited by: orafad on Dec 16, 2011 9:35 AM

ARIAL FONT IN REPORTS(WINDOWS), NOT SHOWN CORRECTLY UNDER LINUX

Our Reports are developed under Windows (Report Builder 9.0.4.0.33 and Windows 2000/Windows XP) and generated under Linux (IAS 10.1.2.0.2 with Red Hat Advanced Server). The Report Output is a PDF, that will be downloaded by the user with WEB.SHOW_DOCUMENT. This works fine, but fonts are not shown correctly in the PDF, especially ARIAL, which is the font we use.
I have run the Fontsolution Configuration Script from Metalink, but we still have a problem.
When you look at the font.pdf, wich is the testreport from fontsolutions, some sizes and styles of Arial are printed correctly others not.
Arial 8 is ok, but Arial 10 and Arial 12 are something like Times New Roman.
Arial 12 Bolded is correct, but Arial 12 italic and Arial 12 bold italic are also not
the Arial Font.
How can we correct this problem?
Regards
Udo
These are the files changed by Fontsolution Configuration Script:
uifont.ali
# uifont.ali provided in fontsolutions.tar for developer 9.0.2
# $Header: uifont.ali@@/main/22 \
# Checked in on Tue Jan 8 15:32:42 PST 2002 by idc \
# Copyright (c) 1999, 2002 by Oracle Corporation. All Rights Reserved. \
# $
# $Revision: /main/22 $
# Copyright (c) Oracle Corporation 1994, 2002.
# All Rights Reserved.
# DESCRIPTION:
# Each line is of the form:
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet> = \
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet>
# The <Face> must be the name (string/identifier) of a font face. The
# <Style>, <Weight>, <Width>, and <CharSet> may either be a numeric
# value or a predefined identifier/string. For example, both US7ASCII
# and 1 are valid <CharSet> values, and refer to the same character set.
# The <Size> dimension must be an explicit size, in points.
# The following is a list of recognized names and their numeric
# equivalents:
# Styles Numeric value
# Plain 0
# Italic 1
# Oblique 2
# Underline 4
# Outline 8
# Shadow 16
# Inverted 32
# Overstrike 64
# Blink 128
# Weights Numeric value
# Ultralight 1
# Extralight 2
# Light 3
# Demilight 4
# Medium 5
# Demibold 6
# Bold 7
# Extrabold 8
# Ultrabold 9
# Widths Numeric value
# Ultradense 1
# Extradense 2
# Dense 3
# Semidense 4
# Normal 5
# Semiexpand 6
# Expand 7
# Extraexpand 8
# Ultraexpand 9
# Styles may be combined; you can use plus ("+") to delimit parts of a
# style. For example,
# Arial..Italic+Overstrike = Helvetica.12.Italic.Bold
# are equivalent, and either one will map any Arial that has both Italic
# and Overstrike styles to a 12-point, bold, italic Helvetica font.
# All strings are case-insensitive in mapping. Font faces are likely to
# be case-sensitive on lookup, depending on the platform and surface, so
# care should be taken with names used on the right-hand side; but they
# will be mapped case-insensitively.
# See your platform documentation for a list of all supported character
# sets, and available fonts.
# BUGS:
# o Should accept a RHS ratio (e.g., "Helv = Arial.2/3").
#===============================================================
[ Global ] # Put mappings for all surfaces here.
# Mapping from MS Windows
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
#Modern = helvetica
#"MS Sans Serif" = helvetica
#"MS Serif" = times
#"Small Fonts" = helvetica
"Sadvocra" = helvetica..Oblique.Medium
"sAdC128d" = helvetica..Plain.Medium
"CarolinaBar-B39-25F2" = helvetica...Bold
#"IDAutomationSMICR" = helvetica
# Mapping from Macintosh
#"New Century Schlbk" = "new century schoolbook"
#"New York" = times
#geneva = helvetica
#===============================================================
[ Printer ] # Put mappings for all printers here.
#===============================================================
[ Printer:PostScript1 ] # Put mappings for PostScript level 1 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
# MICR font
#helvetica=IDAutomationSMICR
#===============================================================
[ Printer:PostScript2 ] # Put mappings for PostScript level 2 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#===============================================================
[ Printer:PCL5 ] # Put mappings for PCL 5 printers here.
helvetica = univers
times = "cg times"
clean = "antique olv"
fixed = courier
lucida = univers
lucidabright = "cg times"
lucidatypewriter = courier
"new century schoolbook" = univers
terminal = "line printer"
#===============================================================
[ Display ] # Put mappings for all display surfaces here.
#===============================================================
[ Display:Motif ] # Put mappings for Motif displays here
# Fix for bug no 778937 DO NOT MOVE!
Roman.....sjis = lucida.....jeuc
Script.....sjis = lucidabright.....jeuc
FixedSys.....sjis = fixed.....jeuc
System.....sjis = lucida.....jeuc
.....sjis = .....jeuc
# Mapping from MS Windows
Roman = lucida
Script = lucidabright
FixedSys = fixed
System = lucida
# Mapping from Macintosh
"Avant Garde" = helvetica
"Bookman" = times
#===============================================================
[ Display:CM ] # Put mappings for all CM displays here.
# These are DEC-specific, and may need localization
*..Blink = Blinking
*..Inverted+Underline.Bold = ReverseBoldUnderline
*..Inverted+Underline. = UnderlineReverse
*..Underline.Bold = UnderlineBold
*..Inverted.Bold = ReverseBold
*...Bold = Bold
*..Underline = Underline
*..Inverted = Reverse
* = Plain # The font of last resort
# Oracle Report PDF sections
# Three new sections have been added:
# [ PDF ] - Used for font aliasing and Multibyte language support
# [ PDF:Embed ] - Used for Type 1 font embedding
# [ PDF:Subset ] - Used for True Type Font subsetting
[ PDF ]
# This example shows how to rename helvetica font to Courier font
# helvetica = Courier
# You can Alias specific styles of font as below
# helvetica.12..Bold.. = Courier.14....
# "Lucida Bright".12..Bold = "New Century Schoolbook"
# Support for Far Eastern Languages:
# PDF section can be additionally used to enable Multibyte language support
# built into Reports. To use this feature with Adobe (r) Acrobat (c), you
# need to install the Asian font pack available online at the Adobe web site.
# .....SJIS = "HeiseiKakuGo-W5-Acro"
# A Japanese report run with Shift-JIS character set is replaced to
# HeiseiKakuGo-W5-Acro CID font.
arial = Arial
"arial" =Arial
"arial narrow" = "Arial Narrow"
"courier new" = "Courier New"
tahoma = Tahoma
"microsoft sans serif" = "Microsoft Sans Serif"
"ms sans serif" = "MS Sans Serif"
"times new roman" = "Times New Roman"
[ PDF:Embed ]
# This example shows how to embed Type 1 helvetica font into the PDF file:
# helvetica = "helvetica.afm helvetica.pfa"
# You need to specify the .afm file before the .pfa file.
# The font files must exist in one of the folders specified in REPORTS_PATH.
[ PDF:Subset ]
# This example shows how to subset Arial True Type font into the PDF file:
# helvetica = "Arial.ttf"
# The True Type font files must exist in any one of the folders specified in
# REPORTS_PATH.
helvetica..Oblique.Medium = "Sadvocra.ttf"
helvetica..Plain.Medium = "Sadc128d.ttf"
helvetica...Bold = "CarolinaBar-B39-25F2-Normal.ttf"
# NOTES ON PRECEDENCE OF PDF SECTIONS:
# If you have entries for a same font in many PDF sections, then Font
# Aliasing entry will take precedence over Font Embedding entry. Entries
# in Font Embedding will take precedence over the entries in Font Subsetting
# section.
# Generic entries for a font must follow more specific entries for the same
# font. For instance, if you want to subset helvetica Plain, helvetica Bold,
# helvetica Italic and helvetica Bold-Italic fonts, your entries must be:
# [ PDF:Subset ]
# helvetica..Italic.Bold.. = "Arialbi.ttf"
# helvetica...Bold.. = "Arialb.ttf"
# helvetica..Italic... = "Ariali.ttf"
# helvetica..... = "Arial.ttf"
# If helvetica..... entry appears in the top of the list, all the styles of
# helvetica font in the layout will be subset as helvetica Plain font.
uiprint.txt
# This is the printer configuration file.
# The format for entries in this file is:
# <OSName>:<Type>:<Version>:<Long Name>:<Description File>:
# The first field is the name of the printer. It is the name you give
# to lpq.
# The second field is the type of driver to be used for the printer.
# Currently, "PostScript" and "ASCII" are the only types of driver for
# printers supported for now. But in future we may be supporting
# drivers for other printer types.
# The third field is the version of the type of printer driver. It's 1
# or 2 for all PostScript printers; or 1 for ASCII printers.
# The fourth field is a long description of the printer. This will be
# presented to the user in the "Choose Printer" dialog window.
# The fifth field is the printer description file to be used. For
# PostScript printers it is the PPD file of the printer. (This field is
# currently unused for ASCII printers.)
# You can use default.ppd for the description file if you don't have a
# PPD file for the printer, but it's best to use the correct PPD file
# for the printer.
# You must fill in at least the first two fields (printer name and
# type). If the version is empty, it defaults to "1"; if the long name
# or description are empty, they will default to empty strings. A
# version of 1 or an empty long name is fine, but, for PostScript
# printers, you must fill in the description file name.
# You don't have to update this file to use any printer. The printer
# chooser interface let's you select a printer and driver at run time,
# as well as associate a printer description file to the printer. You
# should list all printers accessible to users here, however, to
# simplify selecting a printer.
# The first entry in this file will be used as the default printer, if
# no printer was selected in the operating system. (For Unix, the
# following environment variables will be used in turn to get the
# default printer's name:
# TK2_PRINTER
# ORACLE_PRINTER
# PRINTER
# For other platforms, see the Installation and User's Guide for your OS
# for information on setting the default printer.)
# WARNING: Do not define multiple entries for the same printer by the
# same name. Selecting a printer with multiple entries will always result
# in the first entry being selected. Instead, see if your OS allows you
# to create an alias for the printer, and use an alias for the second type.
# The following are examples; replace them with printers accessible from
# this machine.
# hqunx15:PostScript:1:The really slow printer on 12th floor:dcln03r1.ppd:
# hqdev2_pos:PostScript:1:The fast ScriptPrinter in 1281:dclps321.ppd:
# hqunx106:ASCII:1:LNO printer in the 11th floor printer room:none:
# hqdev9:PostScript:1:Bogus printer for Reports ASCII QA:default.ppd:
# hqunx121:PostScript:1:APO printer in 500OP for NLS QA:ok800lt1.ppd:
# --- Note that the following two printers are aliases for the same
# --- physical printer, with different names for different types:
# tk2hp4m:PCL:5:HP printer in 771 for testing PCL:ui4.hpd:
# tk2bw1ps:PostScript:1:HP printer in 771 for testing PS:hp4mp6_1.ppd:
# Not A Printer:ASCII:1:Configure your uiprint.txt file:none:
fontprinter:PostScript:1:printer for fonting fixes:default.ppd:
datap462.ppd
*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1992 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.0"
*FileVersion: "3.1"
*PCFileName: "DATAP462.PPD"
*LanguageVersion: English
*Product: "(Dataproducts LZR 2665)"
*PSVersion: "(46.2) 1"
*ModelName: "Dataproducts LZR-2665"
*NickName: "Dataproducts LZR-2665 v46.2"
*% ==== Options and Constraints =====
*OpenGroup: InstallableOptions/Options Installed
OpenUI Option1/Optional Lower Tray: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
CloseUI: Option1
*CloseGroup: InstallableOptions
UIConstraints: Option1 False *InputSlot Lower
*% General Information and Defaults ===============
*ColorDevice: False
*DefaultColorSpace: Gray
*FreeVM: "178744"
*LanguageLevel: "1"
*VariablePaperSize: False
*FileSystem: False
*Throughput: "26"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
*End
*Reset: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
*End
*DefaultResolution: 300dpi
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
( ) cvs print (dpi) = flush
restore
*End
*% Halftone Information ===============
*ScreenFreq: "50.0"
*ScreenAngle: "54.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: " {dup mul exch dup mul add sqrt 1 exch sub } "
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "
{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*End
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "statusdict /lettertray get exec letterR"
*PageSize Letter.Transverse: "statusdict /lettertray get exec letter"
*PageSize Legal: "statusdict /legaltray get exec"
*PageSize Ledger: "statusdict /ledgertray get exec"
*PageSize Statement: "statusdict /statementtray get exec"
*PageSize Tabloid: "statusdict /11x17tray get exec"
*PageSize A3: "statusdict /a3tray get exec"
*PageSize A4: "statusdict /a4tray get exec a4R"
*PageSize A4.Transverse: "statusdict /a4tray get exec a4"
*PageSize A5: "statusdict /a5tray get exec"
*PageSize B4: "statusdict /b4tray get exec"
*PageSize B5: "statusdict /b5tray get exec b5R"
*PageSize B5.Transverse: "statusdict /b5tray get exec b5"
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "letterR"
*PageRegion Letter.Transverse: "letter"
*PageRegion Legal: "legal"
*PageRegion Ledger: "ledger"
*PageRegion Tabloid: "11x17"
*PageRegion A3: "a3"
*PageRegion A4: "a4R"
*PageRegion A4.Transverse: "a4"
*PageRegion A5: "a5"
*PageRegion B4: "b4"
*PageRegion B5: "b5R"
*PageRegion B5.Transverse: "b5"
*PageRegion Statement: "statement"
*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "20 16 591 775 "
*ImageableArea Letter.Transverse: "18 19 593 773 "
*ImageableArea Legal: "18 19 593 990 "
*ImageableArea Ledger: "18 16 1205 775 "
*ImageableArea Tabloid: "16 19 775 1206 "
*ImageableArea A3: "18 21 823 1170 "
*ImageableArea A4: "18 18 576 823 "
*ImageableArea A4.Transverse: "18 19 577 823 "
*ImageableArea A5: "18 19 401 577 "
*ImageableArea B4: "19 15 709 1017 "
*ImageableArea B5: "20 19 495 709 "
*ImageableArea B5.Transverse: "20 19 495 709 "
*ImageableArea Statement: "22 19 374 594 "
*?ImageableArea: "
save
/cvp {( ) cvs print ( ) print } bind def
/upperright {10000 mul floor 10000 div} bind def
/lowerleft {10000 mul ceiling 10000 div} bind def
newpath clippath pathbbox
4 -2 roll exch 2 {lowerleft cvp} repeat
exch 2 {upperright cvp} repeat flush
restore
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Letter.Transverse: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension Ledger: "1224 792"
*PaperDimension Tabloid: "792 1224"
*PaperDimension A3: "842 1191"
*PaperDimension A4: "595 842"
*PaperDimension A4.Transverse: "595 842"
*PaperDimension A5: "420 595"
*PaperDimension B4: "729 1032"
*PaperDimension B5: "516 729"
*PaperDimension B5.Transverse: "516 729"
*PaperDimension Statement: "396 612"
*RequiresPageRegion All: True
*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Upper
*InputSlot Upper: "0 statusdict /setpapertray get exec"
*InputSlot Lower: "1 statusdict /setpapertray get exec"
*?InputSlot: "
save
[ (Upper) (Lower) ] statusdict /papertray get exec
(get exec) stopped ( pop pop (Unknown)} if = flush
restore
*End
*CloseUI: *InputSlot
*OpenUI *ManualFeed: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True: "statusdict /manualfeed true put"
*ManualFeed False: "statusdict /manualfeed false put"
*?ManualFeed: "
save
statusdict /manualfeed get {(True)}{(False)}ifelse = flush
restore
*End
*CloseUI: *ManualFeed
*DefaultOutputOrder: Reverse
*% Font Information =====================
*% This datap462.ppd is provided by fontsolutions.tar
*DefaultFont: Courier
*Font ArialMT: Standard "(001.004)" Standard ROM
*Font Arial-ItalicMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font ArialNarrow: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Italic: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Bold: Standard "(001.004)" Standard ROM
*Font ArialNarrow-BoldItalic: Standard "(001.004)" Standard ROM
*Font CourierNewMT: Standard "(001.004)" Standard ROM
*Font CourierNew-ItalicMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font Courier: Standard "(001.004)" Standard ROM
*Font Courier-Bold: Standard "(001.001)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.001)" Standard ROM
*Font Courier-Oblique: Standard "(001.001)" Standard ROM
*Font Helvetica: Standard "(001.001)" Standard ROM
*Font Helvetica-Bold: Standard "(001.001)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.001)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.001)" Standard ROM
*Font IDAutomationSMICR: Standard "(001.001)" Standard ROM
*Font Symbol: Special "(001.001)" Special ROM
*Font Tahoma: Standard "(001.001)" Standard ROM
*Font Tahoma-Bold: Standard "(001.001)" Standard ROM
*Font Times-Bold: Standard "(001.001)" Standard ROM
*Font Times-BoldItalic: Standard "(001.001)" Standard ROM
*Font Times-Italic: Standard "(001.001)" Standard ROM
*Font Times-Roman: Standard "(001.001)" Standard ROM
*Font TimesNewRomanMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldItalicMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-ItalicMT: Standard "(001.001)" Standard ROM
*?FontQuery: "
save
/str 100 string dup 0 (fonts/) putinterval def
count 1 gt
exch dup str 6 94 getinterval cvs
(/) print print (:) print
FontDirectory exch known
{(Yes)}{(No)} ifelse =
{exit} ifelse
}bind loop
(*) = flush
restore
*End
*?FontList: "
FontDirectory { pop == } bind forall flush
(*) = flush
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: BD check"
*Status: "PrinterError: Paper jam"
*Status: "PrinterError: Replace toner bag"
*Status: "PrinterError: Warming up"
*Status: "PrinterError: Timing error"
*Status: "PrinterError: Fuser check"
*Status: "PrinterError: Cover opened"
*Status: "PrinterError: Toner empty"
*Status: "PrinterError: Empty & reset output bin(s)"
*Status: "PrinterError: Sorter or jogger error"
*Status: "PrinterError: Scanner check"
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"
*Source: "Centronics"
*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "BD check"
*PrinterError: "Paper jam"
*PrinterError: "Replace toner bag"
*PrinterError: "Warming up"
*PrinterError: "Timing error"
*PrinterError: "Fuser check"
*PrinterError: "Cover opened"
*PrinterError: "Toner empty"
*PrinterError: "Empty & reset output bin(s)"
*PrinterError: "Sorter or jogger error"
*PrinterError: "Scanner check"
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*% For 60 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
*% For 53 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
*% For "Dataproducts LZR 2665" version 46.2
*% Produced by "GETapd.ps" version 2.0 edit 47
*% Converted to meet 4.0 specification
*% Last Edit Date: Sep 15 1992
*% The byte count of this file should be exactly 011228 or 011572
*% depending on the filesystem it resides in.
*% end of PPD file for Dataproducts LZR 2665

If you want to make platform independent use of fonts, you have to use the family, such as sans serif.
Arial is owned by monotype (http://monotype.com/). You have to contact them if you wish to redistribute it with your application. They also might have a suitable version that renders nicely under linux.
Pete

Some fonts are not shown correctly in LabVIEW 2012

I found a bug related with fonts in LabVIEW2012 f3 KR.
- When I select NI7SEG in font selection dialog, right font is not shown in the example box.
- Draw text at point.vi shows same problem for some fonts while other fonts are working.
I reported it to Korean NI. As far as I know, this was not reported in previous versions and I couldn't find any related documents in Google.
So, here I would like to know whether it is related with only Korean version. Please let me know if English version is OK.
* OS: Windows 7 32bit KR

Just now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
- Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
- LabVIEW 2010 but on same PC shows correct fonts.
Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
(1st group)
Arial Unicode MS...
Bookshelf Symbol 3....
Windings 3
(2nd group)
@Arial Unicode MS...
@Terminal
(3rd group)
Arial...
Consolas...
Courier...
Licida Console...
NI7SEG...
Verdana

My iWeb page has a different font when shown on a windows vomputer how come????

when my web page is shown on a windows computer, the font changes... how come?

iweb has something called fontmapping, this is defined in one of its plist file.
here are couple links about it in a few years back:
http://11mystics.com/2008/10/06/faq-managing-the-way-fonts-display-on-a-windows- pc/
http://11mystics.com/2007/09/12/how-can-i-ensure-the-fonts-i-use-will-look-good- on-a-pc/
now, it's depend on the font, you can use web safe font or not... it's up to you.
to use none web safe font, you can use css @font-face....
or you can use Cufon: http://cufon.shoqolate.com/generate/
here is Cufon exmaple: http://home.cyclosaurus.com/_Cyclosaurus.html

Windows 7 64bit - Wallpaper is not shown

First of all: sorry for my bad english (I'm from germany)
My wallpaper on my Satellite L670-11R (Windows 7 Home Premium) is not shown. I can only see the backgroundcolor which I can also change although I have an image activated as the desktop background in the properties. When I shutdown my computer I can see the wallpaper for a short time and when I switch to another user I have no problems with it and I can change my wallpaper there.
What can be the reason for this problem? How can I fix this problem.
I'm looking foward to any answer.
timon
null

I can understand you very well and I use my notebook on the same way. As background I use for months now just blue colour but anytime I want I can change any offered wallpaper.
You must understand that such issues are not easy and it is always problematic to discuss on this virtual way. Best option for you is to talk with someone who has good PC knowledge and who can put your notebook on the desk and investigate a little bit what is wrong there.
Here you can get standard answers only > check personalization settings and try to define different themes to see if anything will be changed.
If you have some picture made by your digital cam saved on the notebook try to define it as wallpaper.
Choose your desktop background > Picture location > Browse ...... go to certain picture.
I use notebooks almost 14 years now and I have never heard about such problem. To be honest it will be interesting to have your notebook and see what happen exactly.

In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

Yes, junker thumb drives pour like rain in the market.
Which makes are working on your Air, and which arent?
Stick to Sandisk and a couple of other reliable mfg. of memory sticks

Help is not shown in the window

I have written the necessary documents (HelpSet, MapFile, HelpTOC).
The Table-Of-Contents are shown in the left frame, but if I select them, the html-help-file is not shown in the right frame.
Please help!
HelpSet:
<maps>
<homeID>top </homeID>
<mapref location="vcsMapFile.jhm" />
</maps>

<view>
<name>TOC</name>
<label>Table Of Contents</label>
<type>javax.help.TOCView</type>
<data>vcsHelpTOC.xml</data>
</view>
HelpTOC:
<?xml version='1.0' encoding='UTF-8' ?>

<!DOCTYPE toc
PUBLIC
"−//Sun Microsystems Inc.//DTD
JavaHelp TOC Version 2.0//EN"
"http://java.sun.com/products/javahelp/toc_2_0.dtd">
<toc version="2.0">
<tocitem image="toplevelfolder"
text="Virtual Circuit System">
<tocitem text="Schaltungen erstellen" target="test">
</tocitem>
</tocitem>
</toc>
MapFile:
<?xml version='1.0' encoding='ISO?8859?1' ?>
<!DOCTYPE map
PUBLIC "?//Sun Microsystems Inc.//DTD JavaHelp Map Version 2.0//EN"
"http://java.sun.com/products/javahelp/map_2_0.dtd">
<map version="2.0">
<mapID target="test" url="test.html" />
</map>
test.html:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<title></title>
</head>
<body>
That is the help.
</body>
</html>

The tutorial I believe you are referring to uses Visual Studio .NET 2003. So, it won't be in the exact same place as Visual Studio 2005.
You should be able to right click on the database connection node and see an option for Query Window.

Adobe Acrobat XI pro version, Windows 7, running on iMac parallels, converting pdf to a pdf with reduced size is not possible, error: error in converting the file! What to do? Its a bit annoying not to be able to store pdf files in reduced size, any idea?

Adobe Acrobat XI pro version, Windows 7, running on iMac parallels, converting pdf to a pdf with reduced size is not possible, error: error in converting the file! What to do? Its a bit annoying not to be able to store pdf files in reduced size, any idea?? Thanks, Jörg

Hi Jorg ,
Are you trying to reduce the file size with the "Reduced size PDF" in the save as other option.
Give it a try if you haven't done it prior.
Open that PDF>File>Save as Other>Reduced size PDF.
If possible ,please share the snapshot of the error message with us so that we can have a look in order to assist you further.
Regards
Sukrit Dhingra

T410s - Windows 7 64-bit - Fonts Not Shown

Similar Messages

Maybe you are looking for