T42 and LAN adapter not visible

Hi, I have a T42, which worked flawlessly until I've had to replace the HDD in my pc and installed XP SP3. Wireless works but I cannot get the LAN adapter to work. The Intel LAN adapter is NOT visible in device mgr. I have solved all the hardware conflicts from the XP install. t42-2373-C28. How can I get the hard wired LAN to work?
thanks
Bob
Solved!
Go to Solution.

I would be assuming your installed http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4ZLNJB along with http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62922 ? If lead_org's test does not work. Try uninstalling the ethernet driver and see if DRIVERMAX will find the driver for you. http://www.drivermax.com/ Have you also checked the Network connections to see what it says?
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Similar Messages

JCBC Adapter and File adapter not processing messages

Hi
I noticed that messages are being delivered to Adapter engine and the same are visible in Runtime Workbench with status "to be delivered". But, JDBC Adapter and File Adapter not processing these messages.
Any idea where I can find the problem?
I was able to re-deliver successfully via the JDBC Adapter using the MessagingSystem GUI using XISUPER user.
Regards
Chandu

Hi,
1.Status: TO_BE_DELIVERED
Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
Regards
Agasthuri Doss

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.
The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
Dave

Hi
I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html
He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
I have asked him to post a bug report about Adobe Illustrator CC 2014.1
Dave

After BI 7.0 Upgrade, Authorization Roles and profiles are not visible

Hi Gurus,
We have an issue with authorization roles and profiles are not visible for all end users with new Bex Analyzer (BI 7.0) tool. But still they can see these roles with old Bex Analyzer ( Bex 3.5) tool.
As a developer I have SAP_ALL acces and I can see all authorization roles in new BEx Analyzer (BI 7.0).
I verified in SU01 for user access and every are assigned there roles and they are green.
Do we need to add any new authorization object to fix this issue, please let me know
Thanks and appreciate your help.
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Oct 26, 2009 4:41 PM

Hi Ganesh,
check the behaviour, if you assign
S_USER_AGR
   ACT_GROUP = "..name of the assigned role.."
   ACTVT = 03 (for "display")
b.rgds,
Bernhard

TS2988 I purchased a ringtone and it is not visible in my cloud, etc, but when I try to purchase it again, it says that I have already purchased it. Where can I recover my ringtone?

I purchased a ringtone and it is not visible in my cloud, etc, but when I try to purchase it again, it says that I have already purchased it. Where can I recover my ringtone?

Try Here > https://discussions.apple.com/docs/DOC-3792

I purchased a ringtone and it is not visible in my cloud, etc, but when I try to purchase it again, it says that I have already purchased it. Where can I recover my ringtone?

I purchased a ringtone and it is not visible in my cloud, etc, but when I try to purchase it again, it says that I have already purchased it. Where can I recover my ringtone?

Try Here > https://discussions.apple.com/docs/DOC-3792

I cant eject an empty cd from macbook and it is not visible, any idea?

i cant eject an empty cd from macbook tray and it is not visible on the desktop, any idea guys?

When you reboot your machine hold the track pad button down while it's booting.
It's a old tip tell me if it works!

MDM PI Adapter not visible

Hi experts!
I have deployed this files to get MDM PI Adapter:
MDMCONNECTOR08_0-20008055.SCA         Connector
MDMJ71008_1-10006189.SCA                      JAVA API
MDMADAPTER08_0-10005238.SCA              PI ADAPTER
My PI version is 7.0 SP19.
My MDM version is 7.1 SP8.
I can't view "MDM PI Adapter" in list of Communication Channels in Integration Directory.
Any idea?

Hi,
see sap help: [Installing the MDM PI Adapter |http://help.sap.com/saphelp_nwmdm71/helpdata/en/48/970f1155493987e10000000a421937/frameset.htm] and especially the part "[troubleshooting|http://help.sap.com/saphelp_nwmdm71/helpdata/en/48/9871410e0e0e27e10000000a421937/content.htm]"
And I invite you to check the oss notes on service.sap.com (use terms "MDM PI ADAPTER"), because for instance you will see these ones:
[Note 1455796 - MDM PI Adapter Compatibility|https://service.sap.com/sap/support/notes/1455796]
[Note 1614819 - MDM Adapter type not visible in PI Integration Directory|https://service.sap.com/sap/support/notes/1614819] New !
regards
mickael

Function and attribute tabs not visible in ppoma_crm

Hello Experts,
Function and Attribute tab at the sales organization level is not visible in PPOMA_CRM transaction code for one of the user.
Is it due to some authorization issue ? or anything else ?
Before taking a system trace for that specific user, I would like to know if we are missing anything functionally
Kindly revert
Thanks and Regards
DJ

Hi DJ,
Please see note 926540 - Missing Organisational units
But from your description this does not seems to be the exact symptom.
Yes I would advise to run a SU53 authorization check.
Best regards - Christophe

SP 2010 Publishing - Rollup and Page Images not visible when entering page edit mode

All:
Hello, I have an odd issue recently appearing after installation of FEB 2013 CU install. When users select to Edit a Publishing Page the Rollup Image and also Page Image(Article Page Layout) are not visible. Only the "Click here to insert Image from
SharePoint" link is visible.
The issue has be confirmed in 5 servers across two farms
DEV, QA, and PROD on client recently updated
DEV and PROD in a completely separate client farm
I have confirmed the issue does not exist in two separate farms running April 2012 CU. In both of those environments the image appears with issue even in Edit page mode.
In the farms where the issue exists you can click the insert image link and simply hit OK to see the image again. An easy enough work around for tech savvy but my client's content admins are very confused/frustrated by.
Is this a bug? I have confirmed in two separate farms including brand new web applications using out of the box publishing site templates.

Hi.
We have been facing the same issue in a 2013-environment (SP1), but in this case an upgraded 2010 Solution, which still runs in 2010-mode. Because of this, SharePoint still use resource-files in the 14-hive (as we have not performed an upgrade of Master
Pages etc.) The problem is also reproduced on a clean 2010 Site Collection in the same 2013-environment.
I have managed to find the cause of the problem (at least in our environment), and that is that as long as the selected picture/image has
not defined an "AltText"/"Alternate Text" the problem seems to occur.
In other words, try to define an Alternate Text and click OK in the "Edit Image Properties" Dialog.
I don't know if this may be the case for everyone else, but give it a try.
From this, I've further discovered (after hours of js-debugging) that there is a minor change (from 2010 to 2013) in a js-file called "SelectorControls.js" which is responsible for updating the various controls used in Page Layouts etc.
The problem exist in a method called ASO_UpdateButtonsAndPanels(), which checks whether the Image Control in question has content or not (Url). The local variable "hasContent" is then determined of an if statement, if(this.AssetData.ManageLinkDisplayText)
which in 2010 (14-hive) seems to be "true" regardless whether the Control is of type Image or Hyperlink. Further the code checks for AssetText (Alternate Text) which on an Image may be left empty.
In 2013 (15-hive) however, this if statement has been changed to, if(this.SelectorType==ConstLinkSelectorType), which clearly states "Image" or "Link" depending on the type of control.
I don't know if this is the cause of the problem in 2013, but in 2010 it seems to be exactly that.
Pending a solution from Microsoft, we have modified SelectorControls.js to overcome this issue until the customer decides to do a Visual Upgrade to 2013.
This is by all means not a supported nor a a permanent solution to the problem, as future Hotfixes, Service Pack etc. may "reset" our fix.
Below is a copy of the working solution:
function ASO_UpdateButtonsAndPanels()
{ULSuBa:;
var hasContent=!!this.AssetData.AssetUrl;
//SharePoint 2010: ManageLinkDisplayText is always "True"
//var hasContent=!!this.AssetData.AssetUrl;
//if(this.AssetData.ManageLinkDisplayText)
//hasContent=hasContent && !!this.AssetData.AssetText;
//SharePoint 2013
//var a=!!this.AssetData.AssetUrl;
//if(this.SelectorType==ConstLinkSelectorType) a = a && !!this.AssetData.AssetText;
//Fix for preventing existing selected image to disappear when saving page and/or editing a page with existing image.
if(this.SelectorType!=ConstImageSelectorType)
if(this.AssetData.ManageLinkDisplayText)
hasContent=hasContent && !!this.AssetData.AssetText;
if( hasContent )
if (this.ClearAssetButton !=null)
this.ClearAssetButton.EnableButton();
this.GetAssetSelectedPanel().style.display="inline";
this.GetEmptyPanel().style.display="none";
else
if (this.ClearAssetButton !=null)
this.ClearAssetButton.DisableButton();
this.GetAssetSelectedPanel().style.display="none";
this.GetEmptyPanel().style.display="inline";
I hope this helps anyone else struggling with the same problem.
Thanks!
Øyvind

E5 memory card images and videos are not visible i...

am using nokia e5,it was working all well but few days before i tranferred files from laptop to my cell(images) using Mass Storage option by data cable.soon after that images and videos saved in memory card is not visible on phone.test mesgs and music files are visible but phone isnt showing my images and video files which ive recievd through bluetooth and saved in memory card.why is this so???plzzz help me am in mess cant help it

Hi saaraaz,
Welcome to the forum! I tried to transfer pictures via bluetooth and they were saved to gallery like they should. Please try the following actions and between them test if it works.
Firstly please make a back up with Nokia Suite. Then type in *#7780# = soft reset, no data lost.
If it's still the same, type in *#7370# = hard reset, the phone memory will be wiped. Restore back up. You can also try to make the back up without settings and then format and restore.
Reinstall the software. The process is the same when updating, but at the end select "reinstall".
Hope you get the device working again, please let me know if this is not the case.
Jampe
If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated.

"Files" and other tabs not visible for document library after script editor webpart is added

I created a document library and uploaded a few documents to ti. On the ribbon, I could see both "Files" and "Library" tabs. I then added a Script Editor webpart to this page because I needed to run some javascript on this
page. Now, when I go to that document library page (AllItems.aspx) then I don't see the Files and Library tab. My guess is that this is because these tabs are context sensitive so they only appear when Sharepoint knows you're working with a document
library and since now I have both the webpart that shows the document library and the Script editor webpart, that context is not there. If I click somewhere on the page close to the actual list of documents, then the Files and Library tabs reappear since
now Sharepoint knows that I'm working with a document library. Is there any way aroudn this? We don't want to have to ask our customer to click somewhere on the screen in order to get access to these tabs. I'm not sure why Sharepoint would
be confused by the Script editor webpart. It is not visible so when the page is not in edit more, you can't even see that Script editor. So, my question is: is there any way to:
- either find some other way of using javascript on this page (maybe external javascript file with some link to it on the page?
- or, some way to force the Fiels and Library tabs to be visible no matter what (i.e. despite having the Script editor webpart on the page).
I also experienced this issue when I wanted to insert some customized text on the same page that had a document library. For example, I created a document library and then on the AllItems.aspx page I inserted a content editor webpart so that I can
show some text at the top. That also caused the Files and Library tabs to disappear.
thanks,

Hi,
I understand Files/Libraray tab disappear after you add web parts to a document library, once you click somewhere in library list, it will appear again.
This is by design. As workaround, please try to use SharePoint Desginer to edit Allitems page of document library instead of using script web part.
https://social.msdn.microsoft.com/Forums/office/en-US/fd1bb098-6425-437c-b3f8-25bf65bcaad3/ribbon-control-disappears-on-sharepoint2013-document-libraries-when-content-editor-web-part-has?forum=sharepointdevelopment
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

MRS - Resources and demands are not visible in the Planning Board

Hi Friends - I am working on the the MRSS 610. We have installed it on the our ECC 6.0 as an add-on. We have configured the system as per the configuration guide.
But when I am accessing Manageru2019s Planning Board - /MRSS/PLBOMGR , using the Organization unit, I am getting Notification saying that the resources assigned to the Organization unit are not available in the MRS.
"Resource 00000000010000000000000000000000 not yet created in the WFM Core"
The details of the Error message
"Resource 00000000010000000000000000000000 not yet created in the WFM Core
Message no. /MRSS/SGE034
Diagnosis
Resource 00000000010000000000000000000000 has not yet been created in MRS.
System Response
No assignments have been created for resource 00000000010000000000000000000000, even though, according to the organizational model, this resource is to be taken into consideration in the planning board.
Procedure
Contact technical support.
Procedure for System Administration
Create the resource in question in MRS."
I have run the Report
/MRSS/HCM_RPTWFMIF : Transfers the HR data (availability times, qualifications and the resources itself) into the MRS Basis
But even after that I am not getting the resources in the planning board.
Also I am not able to view the Demands from PM/CS orders.
I have created PM Orders and
Assigned Work centres to the operations and
assigned the Resources to the Operations.
The HR assignment to the work center is also done.
I have tried T Code /MRSS/PLBOSRV - Enter the MRS planning board using a specified order
to pull the order demand. But it is not working
Its giving following message
1004280 is not a valid demand
Message no. /MRSS/SGU139
Diagnosis
The order does not exist in MRS.
This may be because:
The order number has an invalid format.
The order does not exist.
The order is not relevant for planning and has therefore not been transferred to MRS.
The order has been deleted from MRS.
Pls help me on this.
Thanks in advance and warm regards
Purnendu

Hi Anil/Saurabh - Thanks a lot for your replies.
I have checked the MRS configuration as per your suggestion.
It looks fine as per the configuration guide. I have done the PM/CS integration for Orders as demand.
But the Demands are not visible on the Planning Board.
I have checked in the debugging mode what is causing the problem - It looks like
"The Database Table: /mrss/d_dem_h needs entry"
But there are no entries in this table.
I could not find any Customizing transactions or Application transactions for maintaining this table. This is an Application Table for Master and Transaction Data and its Display and Maintenance allowed with Restriction.
I could not also find any transaction for transferring Demand from ECC(R/3) to MRS.
How do I maintain entries in this table?
How do I transfer Demand from ECC to MRS?
Saurabh - I have also been not able to transfer HR Resources from ECC to MRS.
We don't have WFM Core installed in our instance. But MRS should work fine without WFM. MRS Basis should take care of it.
To transfer Employee resources i have run the Program " /MRSS/HCM_RPTWFMIF". But when I execute the transaction with the selection parameters system shows that it is processing (Clock at the bottom Status bar) but it does not shows any result or status.
So I am not sure whether it is executing the program properly.
Pls help me resolve these issues.
Thanks and warm regards
Purnendu

New version of app with subscription and newsstand support not visible in App Store

This might be more question aimed on Apple Support, but maybe someone had similar experience. Today at morning i've released new version of App for customer. This version have two main news - support for newsstand and subscription. Old version disappeared from App Store, but new one is not visible on any market. i'm quite confused, anyone have idea what happened?

Hi, Steven and Martin
I have this porblem now. My app is out from app store, because I delete the subscription in my app with newsstabd enable.
I'm a little confused, because I submit a new subscription - with a new product ID - because I can't reuse the first.
Apple don´t allow me update a new app without newsstand. Until now I hadn´t answer from apple about the new subscription and my app continuous nor visible in app store, but the status is "ready to sale".
At least, Apple should me send a message about this issue.
All the problem started because I set the tier price to subscription the same value to retail price (tier 3), then when I changed the tier price to amount the period subscription - 6 months (tier 90). This price (tier 90) was set to the retail folios too, so my magazine turned the most expensive in App Store!!!
Please, I'd like and I need to understand better how set differents prices to retail and subscription, because something happened wrong in my first try

Facebook profile and home are not visible

Today in the afternoon, Facebook started to act strangely. I can log on without a problem, but when i'm in the website the home and the profile pages are not visible, they are blank and this is strange because with Chrome i have no problems, and because in the safe mode the problem is still here, so the plugins aren't the source of the problem.
The account and other option pages are fine, only those two don't work.
Few weeks ago, i had to change a value in the about:config page, to make work "youtube buttons", but i think it's not that the problem, also because this morning Facebook worked. I don't know what to think. Is this maybe Facebook IT fault? Boh.
Thank you for your time

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

T42 and LAN adapter not visible

Similar Messages

Maybe you are looking for