T42 Driver Issues - Ethernet & Wireless

Afternoon,
We recently had an issue with a laptop, basically it stopped responding to anything. Nothing worked so I decided to do a fresh install of Windows XP - all is fine.
However we couldn't backup the drivers and so most of the hardware won't work - nothing major, except I cannot get the ethernet port or wireless to be recognised at all!
I've gone through all the options on the Lenovo driver finder and installed numerous different drivers - but no such luck.
Any recommendations? Are any of these unknown devices related?
Model - Lenovo T42
Type - 2373 (F1G)
Message Edited by Matt_Tolley on 07-21-2008 07:27 AM

Welcome to the forum!
Here's your Ethernet driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62922
and your wireless driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62875
Make sure that you unpack the drivers from their appropriate directories after downloading them:
C>Drivers>Win>Ethernet and C>Drivers>Win>Wlanint
Personally, I'd delete all the folders with previous download that you've attempted and start fresh.
Good luck and let us know.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

  • Backing-Up 2 Macs + Time Machine Using Wireless Hard Drive Issue

    I am trying to use Time Machine to back up my iMac & MacBook wirelessly.
    I have a Western Digital MyBook Essential and an Iomega iConnect wireless USB data station.
    I partitioned the WD hard drive so each Mac has its own partition per WD's helpline instructions. Time Machine works just fine with the WD pugged directly into the Macs via USB. The Time Machine back-ups exist in the correct places.
    The issue is that I am unable to use Time Machine wirelessly. I can mount the partitioned drives just fine on the desktop and am able to access content wirelessly just fine. The iOmega iConnect (which is configured correctly for Time Machine) recognizes the drives just fine. However, when the WD hard drive is connected wirelessly, Time Machine doesn't see it (even though it is on the desktop) and so am unable to back-up.
    Any thoughts?

    brit66 wrote:
    I was told by Iomega that it is (and it's on the box). Plus it has a specific Time Machine setting to enable TM. So I have to presume that it is compatible.
    Yes, I finally found that under Settings.
    It adds a subfolder, which is not the way Time Machine normally backs-up, so it must be intercepting the instructions Time Machine is sending (or perhaps the sub-folder it sets up is actually a sparse bundle disk image.
    In any event, you'll have to contact iomega for help.
    As explained in the link in my previous post, a NAS is fundamentally different from an external HD; it has it's own operating system, so you have to use the setup, etc., instructions provided by the vendor. Also this type of setup often means you cannot do a full system restore.

  • Driver issue after Downgradin​g to Windows 7 (Pavilion 17-f081no)

    So,i went to downgrade yesterday,and have had this problem ever since. Nothing works except one USB port at the right side of the laptop (when looked at front),no usb connections,no wireless or wired connection,nothing. They are all dead,including SD card slot.
    I know its the driver issue,but i cant seem to find them. I need something for USB ports,Ethernet/Network card/,SM BUS controller etc. They are all listed under "Other devices" in Device manager.
    What drivers should i be getting? I have been trying to google,but i am starting to feel really hopeless here.
    My wireless card info:
    PCI\VEN_10EC&DEV_B723&SUBSYS_2231103C&REV_00
    PCI\VEN_10EC&DEV_B723&SUBSYS_2231103C
    PCI\VEN_10EC&DEV_B723&CC_028000
    PCI\VEN_10EC&DEV_B723&CC_0280

    Hi:
    First install the amd chipset drivers and reboot.
    http://support.amd.com/en-us/download/chipset?os=W​indows%207%20-%2064
    See if the generic amd graphics driver works...
    http://support.amd.com/en-us/download/mobile?os=Wi​ndows%207%20-%2064
    Ethernet:  DL and install the second driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.​aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy​...
    Wireless:
    http://h20564.www2.hp.com/hpsc/swd/public/detail?s​wItemId=ob_143747_1
    Bluetooth:
    http://h20564.www2.hp.com/hpsc/swd/public/detail?s​wItemId=ob_142906_1
    Card reader:  DL and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.​aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT​...

  • Display and driver issues with Windows 7 on i5 MBP

    Hello-
    I just purchased one of the i5 Macbook Pros, and set out to get Windows 7 working through boot camp. I did this on an older model (32-bit) previously with no problems.
    This time around, installation of Windows worked fine, but I have had some trouble getting all the drivers working. The setup.exe program on the OS X DVD didn't want to run at all, I had to do a workaround from the command line that I found on a forum (otherwise I just got a response of "Bootcamp x64 is unsupported on this computer model").
    Eventually I got (at least some of) the drivers to work, but there are still some issues.
    After installing the drivers, things like brightness and two-finger clicking started working. A number of other things still aren't, though:
    - Display: My machine has a 1440x900 screen. But for some reason Windows refuses to go higher than 1280x800.
    - Network: No wireless at all. Windows doesn't detect any wireless capability, and only gets on-line via ethernet.
    There may be other issues, but these are the big ones. Can anyone provide suggestions on what to do to get everything working?
    Thanks!

    I just used winclone to move my Win 7 from my Core2Duo MPB to an i5 MBP and had to do a few updates and have eneded up in pretty much the same place as you. I won't bother installing from scratch. I'm guessing we just need to wait for some bootcamp updates for these new machines.
    For those of you who are looking to migrate your bootcamp partition over, winclone made it easy - I followed the directions for resizing and Win7 boots, does a disk check, then installed many of the new drivers automatically. There are some drivers that are still needed however, wifi and video. I also so a USB driver issue but have to look at that a little closer before I comment.
    Best of luck,
    Simon

  • Sometimes my computer takes too long to connect to new website. I am running a pretty powerful work program at same time, what is the best solution? Upgrading speed from cable network, is it a hard drive issue? do I need to "clean out" the computer?

    Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy.  It is a Macbook Pro  osx 10.6.8 (late 2010).

    Almost certainly none of the above!  Try each of the following in this order:
    Select 'Reset Safari' from the Safari menu.
    Close down Safari;  move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
    Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
    Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
              defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false

  • How can I access the time capsule hard drive via ethernet?

    I recently bought a new laptop, as my old one was sadly stolen. I'm trying to connect to my backed up time capsule hard drive via ethernet to retrieve my files, but it doesn't seem to work. Oddly enough I have no issues over wifi. When I switch from wifi to ethernet, it gives me an error message stating that the disk was not found in the network. I have a MacBook Air with an ethernet adapter if that makes any difference. I'm also running the latest OS X and firmware. Wifi is simply too slow for this restoration process, so any suggestions?
    Could I possibly connect via USB? What kind of cable would that require? Is the ethernet issue a problem with my settings?
    Help greatly appreciated

    manzalawy7 wrote:
    I'm trying to connect to my backed up time capsule hard drive via ethernet to retrieve my files, but it doesn't seem to work.
    In the Network panel of System Preferences do you have an Ethernet connection item on the left? If not, authenticate if necessary by clicking on the lock, then click the plus sign at the bottom of that column and add an Ethernet item.
    When I switch from wifi to ethernet, it gives me an error message stating that the disk was not found in the network.
    How are you doing that switching? When you switch to Ethernet do you have connectivity to the Internet? If not, do you see a tiny green light on the Time Capsule next to the Ethernet socket you're using?
    Could I possibly connect via USB?
    No.

  • HP 6600 Scan\Print Driver Issue for Windows 7 Profession​al 64 bit

    Hello,
    For some time now I have been unable to scan or print from my desktop (Windows 7 Professional 64bit) and I have exhausted too much effort and am now bringing it to the masses.
    The problem:
    Printing:  Currently receiving an "Error - Offline" message in my printer queue at all times.
    Scanning:  Scanning has never fully worked on this desktop. I am always unable to communicate with the printer. (Though webscan works through accessing the printers IP address)
    Things I have tried:
    Ran HPPSDr, followed directions (Unpluged power to printer, turn back on, restart computer) brings me to this website after it cannot fix. (Note that while the HPPSDr is running it always notions that there is a driver problem)
    Uninstalled Drivers from CD-ROM, re-installed, countless times
    Installed "Windows 7 Pro 64 bit drivers" from the HP website and uninstalled, countless times.
    Attempted to set a static IP and use "Update IP Address" to point specifically at the printers IP.
    Installed Drivers and finding the printer myself through it's own static IP address.
    Turned off firewall and attempted to print (after reboot), same errors
    Setting up the printer on all of my laptops (3) wirelessly to attempt to find if there is a problem with the printer or static IP. (1 is Windows VISTA 32bit and the other 2 are Ubuntu 32bit). All laptops are able to use the printer wirelessly without any problems.
    Read all of the forums about this issue and attempted all of the 'solutions'. Although I mostly don't see that anyone with this same problem is resolved, unless I'm missing the perfect post.
    Things I have not tried:
    Plugging the USB directly into the desktop. (This seems self defeating as the purpose for this printer was to be able to print wirelessly to it from across the room)
    Re-installed Windows 7 Pro 64bit (Trying to avoid this, would rather just print from laptops)
    You tell me
    Curiosities:
    I have noticed strange things that make me believe the driver is somehow incomptable with my OS. Here is a shot of the properties of the printer:
    Weird that it is not recognizing the model number.
    Also in the Printer Settings when I go to the port tab, there is no port selected, if I try and tab away it forces me to select a port, yet when I do and 'apply' and then re-open the Printer Settings in the ports tab; it has again unselected the previously selected port.
    Theories:
    I feel like my OS is just refusing to notice the IP address for the wireless printer, no matter what I have it set to, even if it's dynamic. It's like the driver for Windows 7 Pro 64bit is actually not the correct driver for my system.
    Anyways, another thing to mention is that I am not currently willing to wipe my operating system and re-install Windows 7 Pro in order to resolve this just yet. I want to see if anyone else has any other avenues I can try before even beginning to consider that. 
    Anyways, thanks in advance for taking the time to read my ramblings and hopefully someone who has resolved this issue can help me.

    Hi Zerosouls,
    I understand you are having an issue with HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit.
    First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
    Restart the computer after this step and try installing Hp Officejet 6600 again.
    Please let me know what happens
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Can I simply just use my Time Capsule as a normal External Hard drive? A wireless external hard drive?

    Can I simply just use my Time Capsule as a normal External Hard drive? A wireless external hard drive?

    I am not sure what you mean by normal external but yes, it is a network hard disk drive.. and you can use wireless.. the only trouble then is, if there is no ethernet connection and internet is by wireless to a different router, then you cannot do both at once.

  • Lenovo G580,Upgraded to Windows 8,Driver issue

    As mentioned on the title,i already installed to Windows 8. And i having problem installing driver from lenovo website,
    not through windows  built in driver.
    As i want to install wifi driver,( i downloaded qualcomm atheros wireless lan driver) issue of :
    Image 1
    but i cannot open my wifi:
    Image 2
    Moderator comment: Image(s) >50KB converted to link(s). Forum Rules.

    Problem Solved by fully remove the driver installer,then install as administraitor right.
    The Bluetooth also solved by :
    1. Remove Lenovo Energy Management Windows8
    2. Install Lenovo Energy management Windows7
    3. Restart
    4.Switch On bluetooth via fn+f5
    5.Install Bluetooth Driver Windows 8 according ur laptop
    6.Restart
    7.Remove Lenovo Energy Management Windows7
    8.Install Lenovo Energy Management Windows8
    9.Restart
    -U will see ur bluetooth on start charm.
    Gudluck

  • [SOLVED]Driver of Broadcom wireless-bcm43142

    Hi
    First I am so sorry to open a new topic while there is one in https://bbs.archlinux.org/viewtopic.php … 5#p1308505. but due to the link is solved and its solutions could not solve my problem I had to open a new one.
    My problem is with my wireless device. Its driver is Broadcom wireless-bcm43142 I do not know why I cannot see my interface. The ip link gives me:
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
        link/ether 20:1a:06:9c:67:19 brd ff:ff:ff:ff:ff:ff
    And the iwconfig gives me:
    enp3s0    no wireless extensions.
    lo        no wireless extensions.
    As you can see there is no wireless interface and wifi-menu (as root) gives:
    Invalid interface specification
    I have found no way to solve my problem.
    Is there any one can help me?
    Last edited by qaderzade (2014-12-18 10:03:35)

    aurabindo
    dmesg did not give me that " a lot of errors telling "Unknown symbols"", and you see its output in bellow.
    I recreated the ramdisk and reboot but still no difference.
    dmesg output is (a little long):
    # dmesg
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Initializing cgroup subsys cpuacct
    [    0.000000] Linux version 3.17.6-1-ARCH (builduser@foutrelis) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014
    [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9cd33087-f581-4583-a7ce-7d50d414eea6 rw quiet
    [    0.000000] e820: BIOS-provided physical RAM map:
    [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
    [    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000096aaffff] usable
    [    0.000000] BIOS-e820: [mem 0x0000000096ab0000-0x0000000097eaffff] reserved
    [    0.000000] BIOS-e820: [mem 0x0000000097eb0000-0x000000009cabefff] usable
    [    0.000000] BIOS-e820: [mem 0x000000009cabf000-0x000000009cebefff] reserved
    [    0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
    [    0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
    [    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
    [    0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
    [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001df5fffff] usable
    [    0.000000] NX (Execute Disable) protection: active
    [    0.000000] SMBIOS 2.7 present.
    [    0.000000] DMI: LENOVO 20238/INVALID, BIOS 79CN46WW(V3.05) 12/23/2013
    [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [    0.000000] AGP: No AGP bridge found
    [    0.000000] e820: last_pfn = 0x1df600 max_arch_pfn = 0x400000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-E7FFF write-protect
    [    0.000000]   E8000-EFFFF write-combining
    [    0.000000]   F0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 0000000000 mask 7F80000000 write-back
    [    0.000000]   1 base 0080000000 mask 7FE0000000 write-back
    [    0.000000]   2 base 009D000000 mask 7FFF000000 uncachable
    [    0.000000]   3 base 009E000000 mask 7FFE000000 uncachable
    [    0.000000]   4 base 00FF800000 mask 7FFF800000 write-protect
    [    0.000000]   5 base 0100000000 mask 7F00000000 write-back
    [    0.000000]   6 base 01DF600000 mask 7FFFE00000 uncachable
    [    0.000000]   7 base 01DF800000 mask 7FFF800000 uncachable
    [    0.000000]   8 base 01E0000000 mask 7FE0000000 uncachable
    [    0.000000]   9 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
    [    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
    [    0.000000] Scanning 1 areas for low memory corruption
    [    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [    0.000000] Using GB pages for direct mapping
    [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [    0.000000]  [mem 0x00000000-0x000fffff] page 4k
    [    0.000000] BRK [0x01b2b000, 0x01b2bfff] PGTABLE
    [    0.000000] BRK [0x01b2c000, 0x01b2cfff] PGTABLE
    [    0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE
    [    0.000000] init_memory_mapping: [mem 0x1df400000-0x1df5fffff]
    [    0.000000]  [mem 0x1df400000-0x1df5fffff] page 2M
    [    0.000000] BRK [0x01b2e000, 0x01b2efff] PGTABLE
    [    0.000000] init_memory_mapping: [mem 0x1dc000000-0x1df3fffff]
    [    0.000000]  [mem 0x1dc000000-0x1df3fffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x180000000-0x1dbffffff]
    [    0.000000]  [mem 0x180000000-0x1bfffffff] page 1G
    [    0.000000]  [mem 0x1c0000000-0x1dbffffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x00100000-0x96aaffff]
    [    0.000000]  [mem 0x00100000-0x001fffff] page 4k
    [    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
    [    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
    [    0.000000]  [mem 0x80000000-0x969fffff] page 2M
    [    0.000000]  [mem 0x96a00000-0x96aaffff] page 4k
    [    0.000000] init_memory_mapping: [mem 0x97eb0000-0x9cabefff]
    [    0.000000]  [mem 0x97eb0000-0x97ffffff] page 4k
    [    0.000000]  [mem 0x98000000-0x9c9fffff] page 2M
    [    0.000000]  [mem 0x9ca00000-0x9cabefff] page 4k
    [    0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
    [    0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
    [    0.000000] init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
    [    0.000000]  [mem 0x9cfff000-0x9cffffff] page 4k
    [    0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
    [    0.000000]  [mem 0x100000000-0x17fffffff] page 1G
    [    0.000000] RAMDISK: [mem 0x37950000-0x37c9ffff]
    [    0.000000] ACPI: Early table checksum verification disabled
    [    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
    [    0.000000] ACPI: XSDT 0x000000009CFFE210 0000A4 (v01 LENOVO CB-01    00000001      01000013)
    [    0.000000] ACPI: FACP 0x000000009CFF7000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: DSDT 0x000000009CFE9000 00AE0E (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: FACS 0x000000009CFBA000 000040
    [    0.000000] ACPI: SLIC 0x000000009CFFD000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: UEFI 0x000000009CFFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: FPDT 0x000000009CFFA000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: ASF! 0x000000009CFF8000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: HPET 0x000000009CFF6000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: APIC 0x000000009CFF5000 00008C (v03 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: MCFG 0x000000009CFF4000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: SSDT 0x000000009CFE6000 002028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: BOOT 0x000000009CFE4000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: LPIT 0x000000009CFE3000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: ASPT 0x000000009CFE1000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: DBGP 0x000000009CFE0000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: SSDT 0x000000009CFDF000 000539 (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: SSDT 0x000000009CFDE000 000AD8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: SSDT 0x000000009CFDA000 00348C (v01 LENOVO CB-01    00000001 ACPI 00040000)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] No NUMA configuration found
    [    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001df5fffff]
    [    0.000000] Initmem setup node 0 [mem 0x00000000-0x1df5fffff]
    [    0.000000]   NODE_DATA [mem 0x1df5f9000-0x1df5fcfff]
    [    0.000000]  [ffffea0000000000-ffffea00077fffff] PMD -> [ffff8801d8c00000-ffff8801debfffff] on node 0
    [    0.000000] Zone ranges:
    [    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
    [    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
    [    0.000000]   Normal   [mem 0x100000000-0x1df5fffff]
    [    0.000000] Movable zone start for each node
    [    0.000000] Early memory node ranges
    [    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
    [    0.000000]   node   0: [mem 0x00100000-0x96aaffff]
    [    0.000000]   node   0: [mem 0x97eb0000-0x9cabefff]
    [    0.000000]   node   0: [mem 0x9cfff000-0x9cffffff]
    [    0.000000]   node   0: [mem 0x100000000-0x1df5fffff]
    [    0.000000] On node 0 totalpages: 1551452
    [    0.000000]   DMA zone: 64 pages used for memmap
    [    0.000000]   DMA zone: 21 pages reserved
    [    0.000000]   DMA zone: 3996 pages, LIFO batch:0
    [    0.000000]   DMA32 zone: 9883 pages used for memmap
    [    0.000000]   DMA32 zone: 632512 pages, LIFO batch:31
    [    0.000000]   Normal zone: 14296 pages used for memmap
    [    0.000000]   Normal zone: 914944 pages, LIFO batch:31
    [    0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
    [    0.000000] ACPI: PM-Timer IO Port: 0x1808
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [    0.000000] PM: Registered nosave memory: [mem 0x96ab0000-0x97eaffff]
    [    0.000000] PM: Registered nosave memory: [mem 0x9cabf000-0x9cebefff]
    [    0.000000] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
    [    0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
    [    0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
    [    0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
    [    0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801df200000 s82752 r8192 d23744 u262144
    [    0.000000] pcpu-alloc: s82752 r8192 d23744 u262144 alloc=1*2097152
    [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1527188
    [    0.000000] Policy zone: Normal
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9cd33087-f581-4583-a7ce-7d50d414eea6 rw quiet
    [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [    0.000000] AGP: Checking aperture...
    [    0.000000] AGP: No AGP bridge found
    [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [    0.000000] Memory: 6025340K/6205808K available (5386K kernel code, 897K rwdata, 1712K rodata, 1136K init, 1176K bss, 180468K reserved)
    [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [    0.000000] Preemptible hierarchical RCU implementation.
    [    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
    [    0.000000]     Dump stacks of tasks blocking RCU-preempt GP.
    [    0.000000]     RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [    0.000000] NR_IRQS:8448 nr_irqs:488 0
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] allocated 25165824 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] hpet clockevent registered
    [    0.000000] tsc: Fast TSC calibration using PIT
    [    0.000000] tsc: Detected 2394.400 MHz processor
    [    0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.33 BogoMIPS (lpj=7981333)
    [    0.000031] pid_max: default: 32768 minimum: 301
    [    0.000037] ACPI: Core revision 20140724
    [    0.010737] ACPI: All ACPI Tables successfully acquired
    [    0.015141] Security Framework initialized
    [    0.015146] Yama: becoming mindful.
    [    0.015604] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [    0.017037] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [    0.017660] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [    0.017670] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [    0.017854] Initializing cgroup subsys memory
    [    0.017859] Initializing cgroup subsys devices
    [    0.017860] Initializing cgroup subsys freezer
    [    0.017862] Initializing cgroup subsys net_cls
    [    0.017864] Initializing cgroup subsys blkio
    [    0.017883] CPU: Physical Processor ID: 0
    [    0.017884] CPU: Processor Core ID: 0
    [    0.017888] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [    0.018805] mce: CPU supports 9 MCE banks
    [    0.018821] CPU0: Thermal monitoring enabled (TM1)
    [    0.018833] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    [    0.018930] Freeing SMP alternatives memory: 20K (ffffffff819fe000 - ffffffff81a03000)
    [    0.019643] ftrace: allocating 20687 entries in 81 pages
    [    0.027980] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.061010] smpboot: CPU0: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz (fam: 06, model: 3c, stepping: 03)
    [    0.061020] TSC deadline timer enabled
    [    0.061041] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [    0.061059] ... version:                3
    [    0.061060] ... bit width:              48
    [    0.061061] ... generic registers:      4
    [    0.061062] ... value mask:             0000ffffffffffff
    [    0.061063] ... max period:             0000ffffffffffff
    [    0.061064] ... fixed-purpose events:   3
    [    0.061064] ... event mask:             000000070000000f
    [    0.084495] x86: Booting SMP configuration:
    [    0.084497] .... node  #0, CPUs:      #1
    [    0.098756] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [    0.105430]  #2 #3 #4 #5 #6 #7
    [    0.220589] x86: Booted up 1 node, 8 CPUs
    [    0.220592] smpboot: Total of 8 processors activated (38325.66 BogoMIPS)
    [    0.228167] devtmpfs: initialized
    [    0.230940] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
    [    0.231682] pinctrl core: initialized pinctrl subsystem
    [    0.231717] RTC time:  6:10:48, date: 12/19/14
    [    0.231793] NET: Registered protocol family 16
    [    0.231888] cpuidle: using governor ladder
    [    0.231890] cpuidle: using governor menu
    [    0.231915] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [    0.231917] ACPI: bus type PCI registered
    [    0.231918] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [    0.231992] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.231994] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [    0.232265] PCI: Using configuration type 1 for base access
    [    0.232504] mtrr: your CPUs had inconsistent variable MTRR settings
    [    0.232505] mtrr: probably your BIOS does not setup all CPUs.
    [    0.232505] mtrr: corrected configuration.
    [    0.244996] ACPI: Added _OSI(Module Device)
    [    0.244998] ACPI: Added _OSI(Processor Device)
    [    0.244999] ACPI: Added _OSI(3.0 _SCP Extensions)
    [    0.245000] ACPI: Added _OSI(Processor Aggregator Device)
    [    0.268870] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [    0.269663] ACPI: Dynamic OEM Table Load:
    [    0.269671] ACPI: SSDT 0xFFFF8801D5E0F400 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120518)
    [    0.281610] ACPI: Dynamic OEM Table Load:
    [    0.281617] ACPI: SSDT 0xFFFF8801D5EC8800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120518)
    [    0.294842] ACPI: Dynamic OEM Table Load:
    [    0.294848] ACPI: SSDT 0xFFFF8801D5EA9C00 000119 (v01 PmRef  ApCst    00003000 INTL 20120518)
    [    0.310590] ACPI: Interpreter enabled
    [    0.310598] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
    [    0.310604] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
    [    0.310620] ACPI: (supports S0 S3 S4 S5)
    [    0.310621] ACPI: Using IOAPIC for interrupt routing
    [    0.310644] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [    0.409679] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [    0.409684] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [    0.409798] \_SB_.PCI0:_OSC invalid UUID
    [    0.409799] _OSC request data:1 1f 0
    [    0.409802] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [    0.410449] PCI host bridge to bus 0000:00
    [    0.410452] pci_bus 0000:00: root bus resource [bus 00-fe]
    [    0.410454] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
    [    0.410455] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
    [    0.410456] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [    0.410458] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
    [    0.410465] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
    [    0.410598] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
    [    0.410609] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit]
    [    0.410615] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
    [    0.410619] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
    [    0.410737] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
    [    0.410744] pci 0000:00:03.0: reg 0x10: [mem 0xb0610000-0xb0613fff 64bit]
    [    0.410894] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
    [    0.410913] pci 0000:00:14.0: reg 0x10: [mem 0xb0600000-0xb060ffff 64bit]
    [    0.410970] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [    0.411052] pci 0000:00:14.0: System wakeup disabled by ACPI
    [    0.411091] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
    [    0.411109] pci 0000:00:16.0: reg 0x10: [mem 0xb0618000-0xb061800f 64bit]
    [    0.411169] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [    0.411294] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
    [    0.411315] pci 0000:00:1a.0: reg 0x10: [mem 0xb061d000-0xb061d3ff]
    [    0.411399] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [    0.411502] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [    0.411543] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
    [    0.411558] pci 0000:00:1b.0: reg 0x10: [mem 0xb0614000-0xb0617fff 64bit]
    [    0.411629] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    0.411714] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [    0.411750] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
    [    0.411823] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.411908] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [    0.411944] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
    [    0.412015] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [    0.412100] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [    0.412136] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
    [    0.412206] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [    0.412333] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
    [    0.412353] pci 0000:00:1d.0: reg 0x10: [mem 0xb061c000-0xb061c3ff]
    [    0.412437] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [    0.412538] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [    0.412578] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
    [    0.412784] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
    [    0.412801] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
    [    0.412808] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
    [    0.412816] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
    [    0.412823] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
    [    0.412830] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
    [    0.412838] pci 0000:00:1f.2: reg 0x24: [mem 0xb061b000-0xb061b7ff]
    [    0.412874] pci 0000:00:1f.2: PME# supported from D3hot
    [    0.412986] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
    [    0.413001] pci 0000:00:1f.3: reg 0x10: [mem 0xb0619000-0xb06190ff 64bit]
    [    0.413020] pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
    [    0.413202] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [    0.413306] pci 0000:02:00.0: [14e4:4365] type 00 class 0x028000
    [    0.413333] pci 0000:02:00.0: reg 0x10: [mem 0xb0500000-0xb0507fff 64bit]
    [    0.413472] pci 0000:02:00.0: supports D1 D2
    [    0.413474] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [    0.413504] pci 0000:02:00.0: System wakeup disabled by ACPI
    [    0.418325] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [    0.418331] pci 0000:00:1c.1:   bridge window [mem 0xb0500000-0xb05fffff]
    [    0.418484] pci 0000:03:00.0: [1969:10a0] type 00 class 0x020000
    [    0.418566] pci 0000:03:00.0: reg 0x10: [mem 0xb0400000-0xb043ffff 64bit]
    [    0.418597] pci 0000:03:00.0: reg 0x18: [io  0x3000-0x307f]
    [    0.418873] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.418982] pci 0000:03:00.0: System wakeup disabled by ACPI
    [    0.425034] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [    0.425038] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
    [    0.425042] pci 0000:00:1c.2:   bridge window [mem 0xb0400000-0xb04fffff]
    [    0.472074] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
    [    0.472128] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
    [    0.472179] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
    [    0.472232] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [    0.472279] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [    0.472325] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
    [    0.472377] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
    [    0.472428] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
    [    0.472540] ACPI: Enabled 4 GPEs in block 00 to 3F
    [    0.472570] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [    0.472656] vgaarb: setting as boot device: PCI:0000:00:02.0
    [    0.472657] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.472660] vgaarb: loaded
    [    0.472661] vgaarb: bridge control possible 0000:00:02.0
    [    0.472693] PCI: Using ACPI for IRQ routing
    [    0.478193] PCI: pci_cache_line_size set to 64 bytes
    [    0.478318] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
    [    0.478320] e820: reserve RAM buffer [mem 0x96ab0000-0x97ffffff]
    [    0.478321] e820: reserve RAM buffer [mem 0x9cabf000-0x9fffffff]
    [    0.478322] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
    [    0.478323] e820: reserve RAM buffer [mem 0x1df600000-0x1dfffffff]
    [    0.478404] NetLabel: Initializing
    [    0.478405] NetLabel:  domain hash size = 128
    [    0.478406] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.478416] NetLabel:  unlabeled traffic allowed by default
    [    0.478437] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [    0.478442] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [    0.480472] Switched to clocksource hpet
    [    0.484636] pnp: PnP ACPI init
    [    0.484735] system 00:00: [io  0x0680-0x069f] has been reserved
    [    0.484737] system 00:00: [io  0xffff] has been reserved
    [    0.484738] system 00:00: [io  0xffff] has been reserved
    [    0.484740] system 00:00: [io  0xffff] has been reserved
    [    0.484741] system 00:00: [io  0x1800-0x18fe] could not be reserved
    [    0.484743] system 00:00: [io  0xfd60-0xfd63] has been reserved
    [    0.484744] system 00:00: [io  0x164e-0x164f] has been reserved
    [    0.484747] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.484790] system 00:01: [io  0x0800-0x087f] has been reserved
    [    0.484792] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.484819] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.484855] system 00:03: [io  0x1854-0x1857] has been reserved
    [    0.484857] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [    0.484903] pnp 00:04: Plug and Play ACPI device, IDs SYN2b15 SYN0700 SYN0002 PNP0f13 (active)
    [    0.484975] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
    [    0.530665] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [    0.530667] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
    [    0.530668] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
    [    0.530669] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
    [    0.530671] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
    [    0.530673] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
    [    0.530674] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
    [    0.530675] system 00:06: [mem 0xff000000-0xff000fff] has been reserved
    [    0.530677] system 00:06: [mem 0xff010000-0xffffffff] could not be reserved
    [    0.530679] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
    [    0.530680] system 00:06: [mem 0x9fa20000-0x9fa20fff] has been reserved
    [    0.530682] system 00:06: [mem 0x9fa10000-0x9fa1ffff] has been reserved
    [    0.530684] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.531112] pnp: PnP ACPI: found 7 devices
    [    0.537673] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
    [    0.537676] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
    [    0.537677] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
    [    0.537698] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [    0.537700] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [    0.537701] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
    [    0.537706] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fcfffff]
    [    0.537709] pci 0000:00:1c.0: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref]
    [    0.537711] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
    [    0.537713] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [    0.537722] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
    [    0.537727] pci 0000:00:1c.0:   bridge window [mem 0x9fb00000-0x9fcfffff]
    [    0.537731] pci 0000:00:1c.0:   bridge window [mem 0x9fd00000-0x9fefffff 64bit pref]
    [    0.537737] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [    0.537742] pci 0000:00:1c.1:   bridge window [mem 0xb0500000-0xb05fffff]
    [    0.537750] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [    0.537752] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
    [    0.537757] pci 0000:00:1c.2:   bridge window [mem 0xb0400000-0xb04fffff]
    [    0.537765] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
    [    0.537767] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
    [    0.537768] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.537769] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
    [    0.537771] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
    [    0.537772] pci_bus 0000:01: resource 1 [mem 0x9fb00000-0x9fcfffff]
    [    0.537774] pci_bus 0000:01: resource 2 [mem 0x9fd00000-0x9fefffff 64bit pref]
    [    0.537775] pci_bus 0000:02: resource 1 [mem 0xb0500000-0xb05fffff]
    [    0.537776] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
    [    0.537778] pci_bus 0000:03: resource 1 [mem 0xb0400000-0xb04fffff]
    [    0.537797] NET: Registered protocol family 2
    [    0.537974] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.538094] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [    0.538215] TCP: Hash tables configured (established 65536 bind 65536)
    [    0.538230] TCP: reno registered
    [    0.538239] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [    0.538263] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [    0.538312] NET: Registered protocol family 1
    [    0.538325] pci 0000:00:02.0: Video device with shadowed ROM
    [    1.871621] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    [    3.206035] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    [    3.206238] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
    [    3.206279] PCI: CLS 64 bytes, default 64
    [    3.206318] Unpacking initramfs...
    [    3.259001] Freeing initrd memory: 3392K (ffff880037950000 - ffff880037ca0000)
    [    3.259009] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [    3.259011] software IO TLB [mem 0x98abf000-0x9cabf000] (64MB) mapped at [ffff880098abf000-ffff88009cabefff]
    [    3.259047] Simple Boot Flag at 0x44 set to 0x1
    [    3.259313] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [    3.259357] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x12
    [    3.259367] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x12
    [    3.259377] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x12
    [    3.259404] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x12
    [    3.259411] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x12
    [    3.259418] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x12
    [    3.259425] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x12
    [    3.259432] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x12
    [    3.259482] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [    3.259503] Scanning for low memory corruption every 60 seconds
    [    3.259747] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [    3.259765] Initialise system trusted keyring
    [    3.260051] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    3.261119] zpool: loaded
    [    3.261122] zbud: loaded
    [    3.261274] VFS: Disk quotas dquot_6.5.2
    [    3.261303] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [    3.261403] msgmni has been set to 11774
    [    3.261449] Key type big_key registered
    [    3.261592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [    3.261641] io scheduler noop registered
    [    3.261643] io scheduler deadline registered
    [    3.261665] io scheduler cfq registered (default)
    [    3.262062] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    3.262075] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    3.262100] vesafb: mode is 1366x768x32, linelength=5504, pages=0
    [    3.262101] vesafb: scrolling: redraw
    [    3.262102] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [    3.262115] vesafb: framebuffer at 0xa0000000, mapped to 0xffffc90010e80000, using 4160k, total 4160k
    [    3.349877] Console: switching to colour frame buffer device 170x48
    [    3.437348] fb0: VESA VGA frame buffer device
    [    3.437362] intel_idle: MWAIT substates: 0x42120
    [    3.437363] intel_idle: v0.4 model 0x3C
    [    3.437364] intel_idle: lapic_timer_reliable_states 0xffffffff
    [    3.437671] GHES: HEST is not enabled!
    [    3.437734] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    3.438127] Linux agpgart interface v0.103
    [    3.438182] rtc_cmos 00:02: RTC can wake from S4
    [    3.438300] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [    3.438332] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
    [    3.438342] Intel P-state driver initializing.
    [    3.438532] ledtrig-cpu: registered to indicate activity on CPUs
    [    3.438774] TCP: cubic registered
    [    3.438992] NET: Registered protocol family 10
    [    3.439502] NET: Registered protocol family 17
    [    3.440322] Loading compiled-in X.509 certificates
    [    3.440352] registered taskstats version 1
    [    3.441426]   Magic number: 10:714:165
    [    3.441569] rtc_cmos 00:02: setting system clock to 2014-12-19 06:10:51 UTC (1418969451)
    [    3.441729] PM: Hibernation image not present or could not be loaded.
    [    3.443627] Freeing unused kernel memory: 1136K (ffffffff818e2000 - ffffffff819fe000)
    [    3.443631] Write protecting the kernel read-only data: 8192k
    [    3.448299] Freeing unused kernel memory: 748K (ffff880001545000 - ffff880001600000)
    [    3.450157] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
    [    3.463162] random: systemd-tmpfile urandom read with 4 bits of entropy available
    [    3.480365] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
    [    3.520316] ACPI: bus type USB registered
    [    3.520334] usbcore: registered new interface driver usbfs
    [    3.520343] usbcore: registered new interface driver hub
    [    3.520396] SCSI subsystem initialized
    [    3.520412] usbcore: registered new device driver usb
    [    3.527223] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    3.527258] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    3.527774] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    3.529927] ehci-pci: EHCI PCI platform driver
    [    3.530065] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [    3.530072] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [    3.530086] ehci-pci 0000:00:1a.0: debug port 2
    [    3.530898] libata version 3.00 loaded.
    [    3.534001] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [    3.534014] ehci-pci 0000:00:1a.0: irq 21, io mem 0xb061d000
    [    3.542963] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [    3.543106] hub 1-0:1.0: USB hub found
    [    3.543110] hub 1-0:1.0: 2 ports detected
    [    3.543320] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [    3.543324] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [    3.543339] ehci-pci 0000:00:1d.0: debug port 2
    [    3.547225] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [    3.547235] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb061c000
    [    3.556309] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [    3.556437] hub 2-0:1.0: USB hub found
    [    3.556441] hub 2-0:1.0: 2 ports detected
    [    3.556672] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [    3.556678] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [    3.556769] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [    3.556791] xhci_hcd 0000:00:14.0: irq 24 for MSI/MSI-X
    [    3.557006] hub 3-0:1.0: USB hub found
    [    3.557025] hub 3-0:1.0: 14 ports detected
    [    3.560152] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [    3.560155] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [    3.560285] hub 4-0:1.0: USB hub found
    [    3.560294] hub 4-0:1.0: 4 ports detected
    [    3.560999] ahci 0000:00:1f.2: version 3.0
    [    3.561114] ahci 0000:00:1f.2: irq 25 for MSI/MSI-X
    [    3.561137] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [    3.561157] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x30 impl SATA mode
    [    3.561159] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems apst
    [    3.566914] scsi host0: ahci
    [    3.567156] scsi host1: ahci
    [    3.567347] scsi host2: ahci
    [    3.567467] scsi host3: ahci
    [    3.567569] scsi host4: ahci
    [    3.567677] scsi host5: ahci
    [    3.567709] ata1: DUMMY
    [    3.567710] ata2: DUMMY
    [    3.567711] ata3: DUMMY
    [    3.567712] ata4: DUMMY
    [    3.567719] ata5: SATA max UDMA/133 abar m2048@0xb061b000 port 0xb061b300 irq 25
    [    3.567722] ata6: SATA max UDMA/133 abar m2048@0xb061b000 port 0xb061b380 irq 25
    [    3.573511] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [    3.849898] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [    3.886651] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    3.887407] ata5.00: ATA-9: WDC WD10JPCX-24UE4T0, 01.01A01, max UDMA/133
    [    3.887410] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [    3.888216] ata5.00: configured for UDMA/133
    [    3.888387] scsi 4:0:0:0: Direct-Access     ATA      WDC WD10JPCX-24U 1A01 PQ: 0 ANSI: 5
    [    3.973973] hub 1-1:1.0: USB hub found
    [    3.974050] hub 1-1:1.0: 6 ports detected
    [    4.080133] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [    4.204158] hub 2-1:1.0: USB hub found
    [    4.204235] hub 2-1:1.0: 8 ports detected
    [    4.206857] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    4.211266] ata6.00: ATAPI: PLDS DVD-RW DS8A9SH, EL3A, max UDMA/100
    [    4.212138] ata6.00: configured for UDMA/100
    [    4.219154] scsi 5:0:0:0: CD-ROM            PLDS     DVD-RW DS8A9SH   EL3A PQ: 0 ANSI: 5
    [    4.236511] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [    4.236515] sd 4:0:0:0: [sda] 4096-byte physical blocks
    [    4.236531] sd 4:0:0:0: [sda] Write Protect is off
    [    4.236533] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    4.236547] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    4.251972] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [    4.251975] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    4.252099] sr 5:0:0:0: Attached scsi CD-ROM sr0
    [    4.260280] tsc: Refined TSC clocksource calibration: 2394.455 MHz
    [    4.363728] usb 3-4: new high-speed USB device number 2 using xhci_hcd
    [    4.484466]  sda: sda1 sda2 sda3 sda4
    [    4.485024] sd 4:0:0:0: [sda] Attached SCSI disk
    [    4.747370] usb 3-7: new full-speed USB device number 3 using xhci_hcd
    [    4.931858] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [    5.080974] usb 3-8: new high-speed USB device number 4 using xhci_hcd
    [    5.261176] Switched to clocksource tsc
    [    5.542435] random: nonblocking pool is initialized
    [    6.737889] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [    7.374747] EXT4-fs (sda2): re-mounted. Opts: data=ordered
    [    8.402584] systemd-journald[180]: Received request to flush runtime journal from PID 1
    [    9.159616] mei_me 0000:00:16.0: irq 26 for MSI/MSI-X
    [    9.162354] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2
    [    9.162358] ACPI: Power Button [PWRB]
    [    9.162422] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
    [    9.162455] ACPI: Lid Switch [LID0]
    [    9.162497] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [    9.162500] ACPI: Power Button [PWRF]
    [    9.202130] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [    9.242990] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [    9.280404] EDAC MC: Ver: 3.0.0
    [    9.285113] thermal LNXTHERM:00: registered as thermal_zone0
    [    9.285116] ACPI: Thermal Zone [TZ00] (45 C)
    [    9.338052] EDAC ie31200: No ECC support
    [    9.364458] ACPI: Battery Slot [BAT1] (battery present)
    [    9.364565] ACPI: AC Adapter [ACAD] (off-line)
    [    9.437541] AVX2 version of gcm_enc/dec engaged.
    [    9.452250] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6
    [    9.480172] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [20:1a:06:9c:67:19]
    [    9.505148] snd_hda_intel 0000:00:1b.0: irq 27 for MSI/MSI-X
    [    9.611542] ACPI Warning: SystemIO range 0x0000000000004040-0x000000000000405f conflicts with OpRegion 0x0000000000004040-0x000000000000404f (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
    [    9.611546] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [    9.624543] sound hdaudioC1D0: CX20757: BIOS auto-probing.
    [    9.624780] sound hdaudioC1D0: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
    [    9.624782] sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [    9.624783] sound hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
    [    9.624784] sound hdaudioC1D0:    mono: mono_out=0x0
    [    9.624785] sound hdaudioC1D0:    inputs:
    [    9.624786] sound hdaudioC1D0:      Internal Mic=0x1a
    [    9.624788] sound hdaudioC1D0:      Mic=0x19
    [    9.625578] sound hdaudioC1D0: Enable sync_write for stable communication
    [    9.628176] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input8
    [    9.628318] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
    [    9.628364] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
    [    9.632142] iTCO_vendor_support: vendor-support=0
    [    9.654572] usbcore: registered new interface driver rtsx_usb
    [    9.717317] media: Linux media interface: v0.10
    [    9.733028] alx 0000:03:00.0 enp3s0: renamed from eth0
    [    9.762463] Linux video capture interface: v2.00
    [    9.762505] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [    9.762530] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
    [    9.762613] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [    9.766150] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (174f:114f)
    [    9.772028] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input11
    [    9.772070] usbcore: registered new interface driver uvcvideo
    [    9.772071] USB Video Class driver (1.1.1)
    [   10.188776] kvm: disabled by bios
    [   10.212338] kvm: disabled by bios
    [   10.214858] [drm] Initialized drm 1.1.0 20060810
    [   10.300482] intel_rapl: Found RAPL domain package
    [   10.300487] intel_rapl: Found RAPL domain core
    [   10.300489] intel_rapl: Found RAPL domain uncore
    [   10.300491] intel_rapl: Found RAPL domain dram
    [   10.572444] [drm] Memory usable by graphics device = 2048M
    [   10.572448] checking generic (a0000000 410000) vs hw (a0000000 10000000)
    [   10.572449] fb: switching to inteldrmfb from VESA VGA
    [   10.572462] Console: switching to colour dummy device 80x25
    [   10.572521] [drm] Replacing VGA console driver
    [   10.592061] i915 0000:00:02.0: irq 28 for MSI/MSI-X
    [   10.592079] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [   10.592080] [drm] Driver supports precise vblank timestamp query.
    [   10.592104] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [   10.627892] [drm] VBT doesn't support DRRS
    [   10.775953] Adding 6291452k swap on /dev/sda3.  Priority:-1 extents:1 across:6291452k FS
    [   10.840003] fbcon: inteldrmfb (fb0) is primary device
    [   11.012282] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
    [   11.396384] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1695, fw id: 739436
    [   11.526095] Console: switching to colour frame buffer device 170x48
    [   11.528923] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [   11.528924] i915 0000:00:02.0: registered panic notifier
    [   11.530503] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
    [   11.544314] mousedev: PS/2 mouse device common for all mice
    [   11.573903] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
    [   11.573964] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
    [   11.574020] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
    [   11.579445] snd_hda_intel 0000:00:03.0: irq 29 for MSI/MSI-X
    [   11.609895] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
    [   11.609965] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
    [   11.610026] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
    [   49.117466] alx 0000:03:00.0: irq 30 for MSI/MSI-X
    [   49.117775] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    [   49.118703] alx 0000:03:00.0 enp3s0: NIC Up: 100 Mbps Full
    [   49.119271] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
    [   60.675960] fuse init (API version 7.23)
    [  300.529167] mce: [Hardware Error]: Machine check events logged

  • Cant find the Driver for my Wireless on my Laptop

    Hi Everyone,
    So I have been trying to fix my Laptop for some time now. I use to have windows Vista on this Laptop then upgraded to Windows 7. Now everything is perfect but for some reason I cannot find the correct Driver for my Wireless on this laptop. I have tried searching and searching for countless hours and even went on the website and let it detect the system and suggest me the drivers but it doesnt seem to pick up my Windows 7. I have tried the Vista before and it did not work as well. So I am really hoping someone on this forum could help me out. You would make my life sooooo much easier : )
    So When I check out the Network IDs under Properties this is what is Listed.
    PCI\VEN_10DE&DEV_0269&SUBSYS_30B7103C&REV_A3
    PCI\VEN_10DE&DEV_0269&SUBSYS_30B7103C
    PCI\VEN_10DE&DEV_0269&CC_068000
    PCI\VEN_10DE&DEV_0269&CC_0680
    Please Let me know if you can help me in any way. Thank you everyone for your time
    Shawn D Blair
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

    Hi:
    Install the above driver and that will install both the ethernet driver and co-processor driver.
    You have a problem with the wireless card...could be minor, could be major.
    The wireless card is missing from the device manager.
    Install this software, reboot, and see if you can turn on the wireless card by using this software.
    http://h20564.www2.hp.com/hpsc/swd/public/detail?s​p4ts.oid=3357379&swItemId=ob_76368_1&swEnvOid=4052
    If that doesn't get the Network Controller device to show up so that you can post the hardware ID for it, then the motherboard is shot.  Power to the slot that the wireless card is connected to has been cut.
    Very common problem with the Nvidia chipset motherboards with the amd processors.

  • X200s w/ Intel 5300 - New driver leaves me wireless-l​ess.

    Hi All,
    I'm hoping this forum can be more helpful than the support line...
    The pre-installed wifi driver on my x200s was giving me problems from the time it arrived.  After a day of wifi usage, Windows would slow to a crawl.  After some digging, I verified that the wifi driver was causing DPC latency issues.
    I upgraded the wifi driver to the Lenovo v13 module and all ability to use the wifi card stopped.  I tried using the ThinkVantage tools to upgrade, I tried complete uninstall, re-installs using the downloaded driver from the Lenovo site.  Nothing worked.  I can see the device in device manager without error, however, fn+f5 doesn't show any wireless cards but the network center CAN see the wireless device and shows full green bars.
    I could not downgrade my driver since I couldn't find it on the Lenovo site.
    I did install the Intel generic driver for the 5300 and that was able to have me connected, but once again, I was left with one day of usage then a reboot.  Failing to reboot eventually leads to a BSOD.
    I've called Lenovo support and the fellow there says, "The only reason their driver wouldn't work is if the hardware was broken."  Which I find a little hard to stomach since it does 'work' using a different driver.  He's asked me to reinstall my whole OS which seems unreasonable.  He then asked me to ship my laptop to them to replace the card... again, seems like a "last effort" scenario.  We compromised on having me bring it to a service center.
    So, before I go to the hassle of replacing one wifi card with another; Has is anyone else having similar problems?  Does anyone else think it's a bit daft that a software driver issue must be fixed by installing new hardware?  It seems to me that the problem is in convincing Windows that the card is powered on...  I doubt a hardware swap will change anything.
    Your thoughts?  Suggestions?
    Details...
    7465-CTO (x200s, 1.86GHz, 4GB, Intel 5300)
    Vista Business 64-bit
    wifi driver v13.0.0.107 (complete failure)

    Take a look at this wiki category: http://wiki.archlinux.org/index.php/Cat … English%29. I suggest the following from it: http://wiki.archlinux.org/index.php/Makepkg, http://wiki.archlinux.org/index.php/ABS … ild_System, http://wiki.archlinux.org/index.php/Arc … _Standards

  • Very slow wine game/nouveau driver issue

    Hello everyone, I'm trying to play a game (Civ 4) using wine. However, it was extremely laggy, and since it runs well on Windows (I have dualboot) plus it's not a very recent game and my laptop is reasonnably well-equipped, I thought it should work well on arch as well. Here is the link in the wine db. I should also add that I'm a very novice wine user so that might well be the (a) source of problem(s). Apart from the lagging, according to the sensors, the CPU's temperature rose from ~50°C to ~100°C within about A MINUTE.
    I checked cpupower to see that the cpu was allowed to run at max speed and tried optirun to use the NVIDIA graphics card rather than the Intel graphics card I have installed. I'm by no means sure that the drivers are installed or configured properly by the way...
    Starting with optirun looked to work (the loading screen came up) but when the main window should've been loaded, the application terminated with the following output:
    err:winediag:wined3d_dll_init The GLSL shader backend has been disabled. You get to keep all the pieces if it breaks.
    libGL error: dlopen /usr/lib32/xorg/modules/dri/nouveau_dri.so failed (/usr/lib32/xorg/modules/dri/nouveau_dri.so: wrong ELF class: ELFCLASS64)
    libGL error: unable to load driver: nouveau_dri.so
    libGL error: driver pointer missing
    libGL error: failed to load driver: nouveau
    libGL error: dlopen /usr/lib32/xorg/modules/dri/i965_dri.so failed (/usr/lib32/xorg/modules/dri/i965_dri.so: cannot open shared object file: No such file or directory)
    libGL error: unable to load driver: i965_dri.so
    libGL error: driver pointer missing
    libGL error: failed to load driver: i965
    [VGL] ERROR: glXCreateContextAttribsARB symbol not loaded
    terminate called without an active exception
    Before today I only used optirun for VLC (though I don't really see a difference) and to check whether it would run with glxgears. Neither case had any problems. I tried softlinking nouveau_dri.so from the "/usr/lib/..." to the "/usr/lib32/..." directory as well as copying it but neither helped.
    Some info:
    Graphic cards:
    01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/820M / GT 620M/625M/630M/720M] (rev ff)
    00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
    Packages:
    local/xf86-video-intel 2.99.916-2 (xorg-drivers xorg)
    X.org Intel i810/i830/i915/945G/G965+ video drivers
    local/xf86-video-nouveau 1.0.11-1 (xorg-drivers xorg)
    Open Source 2D acceleration driver for nVidia cards
    local/nouveau-dri 10.2.8-1
    Mesa drivers for Nouveau
    local/bumblebee 3.2.1-3
    NVIDIA Optimus support for Linux through VirtualGL
    Some advice how to fix the driver issue or about what else might be causing the problems is greatly appreciated!

    Besides agreeing with the notion above, you lack lib32-nouveau-dri and thus are unable to use acceleration with 32bit programs which is the undelying issue here.

  • Hard drive issues after update 10.10.3

    Question also posted here:Hard Drive Issues (Both new and old)
    I'm trapped in a HDD nightmare with my MacBook Pro mid-2012.
    I updated to Yosemite 10.10.3 (with the Photos app). A couple of days after the update, I was watching a movie on my TV screen via HDMI. In the middle of the movie I removed the HDMI cable from the MacBook Pro and everything freezes. I forced shut down (Note: My HDD was encrypted). After I forced shut down, I tried to turn on and the loading screen would never stop loading - like, 14 hours stuck with the progress bar. Since I have backups, I decided to access DU and format my HDD. I tried everything. For real. Every command line I could type on Terminal to format, repair, erase and/or partition. I read almost every issue-related questions on the forums and stack exchange groups for a week (even posted my issue here: http://apple.stackexchange.com/questions/181090/erasing-and-partitioning-hard-dr ive-from-internet-recovery?noredirect=1#comment215695_181090).
    So, I decided that it was a HDD failure and bought a new one.
    I bought the Seagate 1TB SSHD Hybrid  - ST1000LM014. Installed the new fresh disk and guess what? All those same problems again. I´m not able to restore from Time Machine because it doesn't recognize the disk in the restore page. But the disk is recognized in the DU. When I try to erase or partition the new SSHD, the same old errors: File system formatter failed. Yes, I tired GUID Partition Table, all of the security options, etc.
    Please. Any light that you can throw at this issue, I'll be very grateful for. BTW, the new SSHD is recognized and the SMART Status says: Verified.
    Any ideas on *** is going on?
    Thanks in advance!
    MacBook Pro (13-inch Mid 2012), i7, 8GB RAM

    After I erase the hard drive (I assume one pass of writing zeros is good enough, 7 passes not needed?) do I turn off the laptop, then turn on and insert the Install Disk? Will there be a prompt telling me when to put in the disk? Or do I put in the disc right after erasing?
    One pass is fine. If you've previously backed up your hard drive to an external hard drive using SuperDuper!, which is what I use and recommend, or another program, if it created a bootable drive, you want to boot off of it, bring up SuperDuper! and copy the drive back to the internal hard drive. SuperDuper also makes the drive bootable. When done, reboot, and you should be all set. If you're using Time Machine, you'll want to install the operating system, then restore the Time Machine backup. SuperDuper! is available from http://www.shirt-pocket.com/superduper/superduperdescription.html
    Finally- should I update the OS? Is there a problem with the newest update that caused this crash, or was it just a spurious glitch/bad luck?
    I've been running 10.5.8 for awhile with no issues, and would recommend moving to it.

  • Can you use a Mac Mini to share documents between several devices? iPhones, MacBooks, iPads, etc...? We are a home based business with several locations across the state and are having Google Drive issues, looking into Mac Mini options.

    We are having Google Drive issues (some files won't sync) and it's causing us trouble with our business communication. Is there any way to use a Mac Mini to share documents between two people in different areas similar to google drive? Would this just be done through iCloud?

    If you use Numbers, Pages and KeyNote it si very easy to sync those document among all the Apple devices. You need montain Lion on the Mac  and at least iOS 5 on the mobile devices.
    I show those document on my Mac, iPad 4 and iPhone 4S

Maybe you are looking for