T42 problem with after restore factory settings
Hi, can enybody help my please, I am helpless....
I was reinstalled my T42 to factory settings and update everithing with "system update" utility. I have WIN XP SP3.
I have very big complications with wifi connection ( maybe only with WPA2). I traied reinstal all site adapter driver for 11 b/g Wireless LAM Mini PCI Adapter (new or old), use install or uninstall Think Vatage Acces Connection....problems still.
The connections is after restart computer OK and quickly connect. But when i lost connection for little while ore try repair connection, the wifi connection ist lost a try take IP adress for long time and never taked it. Only restart can help. Sometimes i cant see any wifi networks but the LED wifi symbol light.
Now I dont know what to do, I traied everithing. Thanks for help.
Have you tried going back to SP2? Quite a few people have reported networking issues with SP3....
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.
Similar Messages
-
Trouble with syncing after restoring factory settings
got msg on laptop (when trying to sync ipod) that I needed to restore my ipod to factory settings. Thinking it was just some kind of update, I cliked, lost all songs on nano (not on laptop), but now it wont re-sync . What can I do to get it to sync?
can anyone help?Are you using Windows or an Apple computer?
-
Wifi not working after restoring factory settings
Need some help.
I have an iMac with 10.9 and an older Airport Extreme base station (802.11n, I think it is 2nd Gen. Square with an indentation around the sides toward the top).
I had been encountering problems so restored to factory settings.
I went through set-up and the unit glows green. The airport utility shows Internet and Wifi both green. The iMac can access the internet.
However, the problem is with other devices.
iPhone 5 and iPad mini both see the new wireless network but can't connect to it. Spining and spinning and spinning. The iOS airport utility for both devices show internet green and Wifi green. However no connection on either Both will connect to other wireless networks fine.
Thanks in advance.Try changing the name of the AirPort Extreme wireless network and also the password.
Keep the wireless network name short.....no more than 20 characters. 8-10 would be ideal. No special characters like an apostrophe, dollar sign, asterisk, etc.
Use only letters and numbers with no blank spaces in the name.
Same rules for the password, which must be at least 8 characters
Apple's iOS Troubleshooting Guide is here:
http://support.apple.com/kb/TS1398 -
Problem with reset to factory settings.
I have a go notebook with the product number D1E89UA#ABA. I am wanting to reset this computer to factory settings but it won't let me. It has windows 8 on the computer so I click change pc settings and go down to general. Then I scroll down to where it says remove everything and reinstall windows. Then I click get started the I click next, then it says preparing. Then I click on fully clean the drive because I want it to be 100% factory settings. Then I have it plugged into the charger and click reset to reset the computer. Then every single time it says there's a problem no changes are made. Then I click check solutions to this problem and it never pops up any solutions. Please help!!
Hello @Rkaeden,
I understand that you are trying to recover your computer back to factory settings. I am providing you with an HP Support document: Performing an HP System Recovery (Windows 8), which will walk you through the process of doing a Factory Recovery on your computer.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
HT4623 activation of i phone after restore factory settings
i restored my i phone factory settings but now its not activating showing no sim services and display message that we are sorry at the movement try again later please tell me what to do now with this phone
"We're Sorry, Activation Server Temporarily Unavailable, contact Customer Care...Your request Could Not Be Completed?"
99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
So, you need to get a sim card from the carrier the phone was originally locked to, or get it officially unlocked, if you want to activate it. Because it appears that it was not officially unlocked. -
Want to die. I've wasted my entire Sunday trying to connect to Wifi on my phone. I tried the reset network settings, restored the phone to factory settings then restored the backup and still no game. I have restarted the **** thing and am very frustrated. Every time I've updated my software with Apple I end up having to replace my phone. I have an appointment with the genius bar tomorrow ,but hopefully someone here can help me so I don't jump in a river before that time.
Hmmm.....
It's worth a hard reset (press and hold the sleep/wake button and the Home button together, ignoring the 'slide to power down' message and then release them when the display blanks. Press the sleep/wake button until the logo appears and then wait for the restart which takes a little while...)
Apart from that, it may be worth clearing Safari's cache, etc..... (Settings > Safari > Clear History/Cookies/Cache)
In any event, 'Good luck'!!
If all else fails it IS possible that some WiFi hotspots are VERY hot and emit more power than is really allowable in the Standards, resulting in 'frying' your WiFi receiver (possible but unlikely). If this is the case, return your iPhone to an Apple store with the 'WiFi not working' message but don't mention Starbuck's or anyone else.....just don't use Starbuck's WiFi service ever again! -
Hi
The screen on my Iphone 5 is consistently freezing. I have restored the factory settings but that didn't work. I have downloaded the latest apple update. Not sure what else to do or if it is a known issue? It happens on any screen, even the lock screen and the only way to unfreeze it is to press the top button to switch to sleep mode then click the round button and enter in my pin again. Any suggestions would be most welcome!Restore the phone as new, and do not restore anything from a backup.
If the phone still doesn't work properly, you will need to bring it to an Apple store to be evaluated as it most likely has a hardware issue.
~Lyssa -
Problem with resseting to factory settings HELP!! ...
hi im having trouble resseting to factory settings. when i enter my lock code it says lock code entered incorrectly 5 times. code will unblock in 5 minutes. what does this mean can anyone help..
It means exactly what it says.
You have entered the code wrong five times so for the next five minutes it will not let you try again. After five minutes it will let you try again.
If you cannot remember your code after further attempts then you will need to visit a nokia care point to get the code reset.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair. -
Lenovo Vibe x : does not start after restore factory settings
Good morning, I face the following problem: I install on the computer Start Lenovo Smart Assistant where I found out that I can update to stable ROM V2.0_1507 so I started to do it. During the update I received a call and the update stuck. I took the phone off and it was working properly. But when I went to do it again I found out that there was not enough space to start the update . Then I thought as a solution to do a factory reset. When I did the phone is stuck to login logo (and even in a different than that in the beginning the phone (is a constant logo of "Lenovo "and below says "POWERED BY android")) and now I can not even open it nor the I see as a device to my computer.
In the forum i did not read someone to have the same issue. Does anyone have idea how can I restore my phone ;;
Solved!
Go to Solution.Finally it's over i just update a new ROM via flash tool and now is working fine
-
I just updated my iPhone 4 to iOS6. In the process, I ran into a problem and had to restore factory settings. After syncing the phone, I see that 218 apps need to be updated. When selecting "update all," it says "Cannot Download. There is not enough available local storage to download these items. You can manage your local device storage usage in Settings."
How can this be the case when I haven't changed any apps from before updrading to iOS6, and I don't have any music yet on the phone? Why is it telling me there is not enough local space?Hi RileyAvaCadenRiver,
If you recently updated your iPhone to iOS7, you will need to update iTunes on your computer to iTunes 11.1 or newer for it to correctly recognize the iPhone. You may find the following link helpful:
Apple: iTunes 11.1.1
http://support.apple.com/kb/DL1614
Regards,
- Brenden -
Unable to sync iphone4. iphone not recognized. wants me to restore factory settings. I've done that several times and problem persists.This has been an issue sunce buying the phone.
Hello @dazegoneby,
I understand that your HP Pavilion p6-2220t Desktop PC running Windows 7 used to connect to your home network without an issue, but recently it does not recognise the network. I am providing you with an HP Support document: Troubleshooting Your Wireless Network and Internet Connection (Windows 7), which has steps to help resolve issues such as this. Now I am not recommending that you do the step that asks you to reset up your router as you have other devices that are working fine so that would not be the issue.
If the above document does not resolve your issue could you please re-post with either a screen shot of your Device Manager showing what is listed in Network Adapters or re-post with which wireless card you have.
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
is there any way to restore factory settings on an Iphone 5s that will not connect to Itunes because the phone is locked with a pass code. Problem is that the screen is completely shattered.
If the screen is completely shattered why bother to try and restore the phone?
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support -
T42 - Problem in Restoring Factory Settings
When I pressed the F11 or Access IBM button to interrupt menu during startup to restore factory settings for T42, it always turn to
Press one of the following keys to continue :
ESC to resume normal startup
F1 to enter the IBM BIOS setup utility
F12 to choose a temporary startup device
I don't have the recovery CD with me. I tried to go to "Access IBM" to create recovery IBM, I can't find this in "Access IBM".
Could you advise how I can restore to factory settings?
Thanks!You probably have your recovery service partition removed, or someone removed it for you. I presume that your normal OS is not booting up correctly anymore???
There is two ways you can go about it if you don't have your normal OS running anymore, you can use a normal XP OS you got from somewhere, and then proceed to install your OS and then download all your relevant drivers from Lenovo site here:
http://www-307.ibm.com/pc/support/site.wss/product.do?doctypeind=9&template=/productselection/landin...
make sure you fill the requiste detail regarding model type
or call Lenovo/IBM service at your location and see whether they can send you the CD for a service charge, this will depend on whether you still got warranty, and whether your warranty is valid in Hong Kong for your machine, the Lenovo/IBM service may send you the cd if you don't meet either one of those conditions, but it is not a given.
I will suggest you just get your own XP os, you can still use the serial key on the bottom of the machine, but you may need to call Microsoft regarding issue of specific activation code.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft -
I am getting a "not delivered" when I try to send a photo from my Ipad or iPhone via iMessage. I can receive photos in iMessage and I can send and receive photos other than with iMessage. I have tried restoring factory settings etc but no luck. Is anyone else having this problem please?
I've been having this problem too, but here's the catch: originally it was only with my dad, and only sometimes. Now it's dad and husband, every time! Pix go through, via imessage, to everyone else, and they go through to dad/husband if I "send as text" after it fails.
And the other annoying thing- the blue bar will run all the way, and it will say "delivered". So I close out of imessage. When I reopen it again, the "delivered" has changed to "not delivered" with the red exclamation point. I just googled "imessage not sending photos" and founds TONS of people with the same problem, but no solutions. (I have rebooted phone, reset network settings, with no luck. I even had to backup/delete/restore my whole phone the other day for a different reason, and hoped that would fix it, but now it won't send to my dad OR my husband (who is on not just the same carrier, but the same family plan as me) -
i selected restore factory settings on my ipod touch but now after restart it stuck on apple icon what will i do anybody help me out plz,even it's not appering on itunes on my p.c
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Maybe you are looking for
-
Trying to modify the code in a component
Hi, I made a flash website with photo galleries using a component that I bought online. The component is loading the image in a thumbnail scroll bar via a XML file and the full size image display in a UILoader. So far nothing special. But when I reac
-
How can we assign a JavaScript function on an TextInput action .
Hello All , I have a requirement that on ON_BLUR event of a MessageStyledText , I have to call a JavaScript function . This however should not refresh the page ( No submit action to the controller) . So how can we tie the JavaScript function to the T
-
I have searched, upgraded to current version, downloaded ESR per instructions on website, all to no end. Apparently it must specifically be version 17 ESR. Where/How do I find it and then download it to replace my current (24 esr)version? Help! And t
-
How to set Material Ledger as Productive
In CKM9 ---> I am getting message as --> Material Ledger Not Yet Productive how to set Material Ledger as Productive Please help
-
Hi Experts, I want to upload data for TCode ME41 by using eCATT TCD recording method. For this i have Created Test Scripts, Created Test Data Containers,Created System Data Containers,Created Test Configurations. I have a legacy file to uploa