T42 & T43 Thinkpad Keyboards not working after taking from docking station
I have a t42 and t43 thinkpads, both are having the same problem.
The keyboards appeared to be disabled, I have uninstalled, reinstalled drivers etc.
Reseated keyboards physically and they still wont work.
The glide pads work.
The only way I can get a keyboard to work in via the docking station.
Power buttons doesn't work either.
Any ideas?
It's almost like the keyboards are disabled, but I have checked every setting possible.
Is it possible to disable the keyboard? If so, how to reverse?
Welcome to the forum.
Have you considered the possibility of keyboards going bad? Improperly connected? A non-functioning ower button is pretty much a dead giveaway for one of these options...
It is not possible to disable an internal keyboard, BTW.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.
Similar Messages
-
T40 KEYBOARD NOT WORKING AFTER STARTUP
IBM THINKPAD LAPTOP
T40 237372M
OS WINDOWS XP PRO SP3
•86 key keyboard with imbedded numeric keypad and
integrated UltraNav dual-pointing system, featuring TrackPoint and customized touch pad
SUBJECT; KEYBOARD NOT WORKING
AFTER STARTUP UNABLE TO OPEN SOFTWARE OR USE TEXT IN NOTEPAD AND OPENOFFICE
I HAVE A TEMPORARY SOLUTION TO OVERCOME THIS PROBLEM BY;
1 )USING MOUSE OPEN START/ THEN NOTEPAD
STILL UNABLE TO ENTER TEXT
2) OPEN START/ONSCREEN KEYBOARD CLICK ON LOCK THEN EXIT
3)GO BACK TO NOTEPAD ENTER TEXT, NOW WORKING I THEN EXIT
WITHOUT SAVING
I TRIED REINSTALLING XP AND LOST MS WORD THAT IS WHY I AM USING OPEN OFFICE
I THOUGHT IT MAY HAVE BEEN THE SP3 UPDATE BUT AFTER USING IBM SYS REINSTALL
DURING RE INSTALL I WAS UNABLE TO USE TEXT FOR WINDOWS LOGIN
THE ONLY KEYS TO USE WERE ÁÉÍÓÚ BEING LATIN CHARACTERS WITH ACUTE SIGN
CAN ANYONE CAN HELP ME THANKSHi and welcome to the forum!
Does the keyboard work fine inside the BIOS?
Also try booting from LiveCD of Ubuntu, if issue remains then the keyboard is faulty.
Keep us informed.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel -
IPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.
iPhone 4s Voice mail notification not working after switching from Verizon to PagePlus. How can I get the notifications working?
Contact your carrier - voicemail, and visual voicemail, is a carrier feature.
-
File- Export not working after upgrade from 11i to R12
Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
JagadeeshaEnabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3 -
I attempted to ask this question, yesterday. However, I am not used to typing with my thumbs, yet, and messed it up some. So, I will give this another try. Auto brightness does not work after upgrade from iOS 5 to iOS 6 on my iPod touch. Is this intended by Apple, or is it a bug?
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
iOS 6 changed how that feature works. -
Sql is not working after changing from MsAccess into sql server
Following Sql is not working after changing from MsAccess into sql server.
sum(trn.sales) as sales,
sum(trn.cost) as cost,
sales - cost as profit // Here is not working . can we not use sales a column. Please advise
from trn
Kind Regards
pol
polachanIt will not work if use two different column from the table or column from two different table
Example
sum(trn.sales * trn.rate) as salesAmount,
sum(trn.cost) as cost,
sum(trn.salesAmount)-sum(trn.cost) as profit ----- Here is not working . can we not use sales a column. Please advise
from trn
Regards
polachan -
Any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station pls
any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station please ? classic working fine, so not the fault of the station itself ? it's been bought as a present for my father & he's confused !
Check the headphone jack with a flashlight and clean it if necessary. The jack on a new Nano is very tight, be sure you push the headset jack all the way in, the plastic on the headset jack should be flush with the body of the Nano.
-
USB Keyboard not working after running Monolingual
Okay, I'm not a Mac person and should have known that I was going to mess up my mother's iMac, but here it is -
In an attempt to improve the mac's performance I performed all of the actions described in the following article: 11 Ways to Optimize your Mac's Performance ( http://lowendmac.com/eubanks/07/0312.html ). Basically, I cleaned up files and 'other' system preferences. Things seemed to be fine and the computer did run much better. However, after running Monolingual and deleting what I understood to be 'unnecessary' PowerPC files the standard USB keyboard is no longer working.
I've tried to search for various remedies, but have come to a dead end. So I'm left with reinstalling the Snow Leopard OS (I think it is 10.6.8?) BUT I can't because it is asking to input the account password (which I know) to make the change and I can't figure how to do that when the keyboard not working.
Any help would be great!
*feeling like a bone head*How are you trying to reinstall Snow Leopard? If you're booting from the Snow Leopard or iMac Install DVD that came with the system then that should eliminate any of the issues you may or may not have caused when you deleted did the clean up work on your mom's system.
I suggest trying the following:
0) Verify that the caps lock key is off. It can make inputting passwords difficult if you don't realize it is ON.
1) Reset the PRAM by restarting the system then quickly press the command-option-P-R keys before the gray screen appears. Wait until you hear the computer restarts two times as indicated by the startup chime. For more info refer to http://support.apple.com/kb/ht1379.
2) If the issue persists after the PRAM reset then boot from the Snow Leopard or iMac Install DVD, whichever you have. Once you see the menu asking you to choose a language try using the arrow keys on the keyboard to move the language choice selection. If the arrow keys are working at this point it indicates your keyboard is at least partially functional. Go ahead and select the language then proceed to step 3.
3) Once the next screen appears move the cursor up to the menu bar area and pull down the Utilities menu. Select the 'Terminal' application. Once the Terminal application launches try typing the various keys on the keyboard and check to see if the correct characters are displayed. Please let us know if you detect any errors. If there are no errors then you should be able to quit the Terminal application and proceed with reintstalling the OS. -
[SOLVED] Xorg and keyboard not working after upgrade.
Hi guys,
after a `# pacman -Syyu` I got Xorg not starting and keyboard not working: I am unable to do anything.
I'm posting here pacman's log that I got by booting an Ubuntu Live CD: https://gist.github.com/anonymous/7517806
Any hint?
How do you recover a system once it's gone like this? Many thanks in advance.
J
Last edited by ifsixwasnine (2013-12-23 13:58:16)WonderWoofy wrote:
I wouldn't necessarily call this [SOLVED]. At best I would probably mention that you found a workaround. The addition of '(downgrade)' likely makes it fine, but just FYI for future threads. There are two reasons for this. One, others who find this thread are likely to dig into it thinking there is a real solution, and two, if you mark it as [Solved] it might generate less attention, lessening the chances of you actually being helped to a real solution.
Just my 1.46¢
You're right, problem wasn't actually solved. In fact, yesterday I upgraded the whole system again and the same problem showed up, but I got it fixed.
Same scenario: after a boot (shorter than usual), what I had was a tty, but I noticed something that I hadn't noticed the last time: the prompt said "Arch Linux 3.11.[?]".
The kernel version was supposed to be 3.12.[?] so I started investigating and after several attempts, this is how I got the system working again:
1. Chrooted into the system
2. Wiped /boot
3. Re-installed grub
4. Re-installed linux kernel
5. Re-created grub.cfg
6. ???
7. Profit
I'm pretty sure that what originated the problem wasn't a "kernel issue" as I pointed out in my previous post, but it was an incorrect installation of grub: in fact, the grub prompt never showed up before yesterday, the system used to boot straight, ignoring the 5 seconds timeout. -
ODI Procedures not working after upgrading from 10G to 11G
Hello Gurus,
We have run into a scenario where the procedures in ODI are not working after we upgraded it from 10G to 11G (11.1.1.6). However we can make it to run if we create the procedure from scratch.
Also we are having issues related to packages where in the packages were running before we applied the patch 11.1.1.6.3. And after applying the patches they are not running.
Any help will be appreciated.
ThanksIf you want someone to help you, please be elaborate in the exact errors you are getting.
A general statement would do nothing but guess work.
What is the error that you get while executing the procedure.
What are the exact issues that you get while executing packages ? -
Does updating the 4th generation iPod touch with iOS6 keep it from working with a Logitech docking station/boombox? Nothing is wrong with the boombox.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
If it still does not work that means that the update broke compatibility. That happens sometimes. You will have to wait for an update to either iPod's iOS or the dock's firmware. -
Keyboard not working after suspend to ram
Hi,
I have this problem since I have my notebook. Is a sony vaio cs.
After suspend to ram the keyboard does't work.
I've read in other forums that is a general gnu/linux problem, not only arch, and I think is related with the i8042 driver and generally hp pavillions have it.
cat /var/log/pm-suspend.log:
Initial commandline parameters: --quirk-dpms-suspend
--quirk-dpms-on
--quirk-vbestate-restore
--quirk-vbemode-restore
--quirk-vga-mode3
--quirk-vbe-post
Thu Aug 13 22:39:47 UYT 2009: Running hooks for suspend.
/usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: success.
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux vaio 2.6.30-ARCH #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009 x86_64 Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz GenuineIntel GNU/Linux
Module Size Used by
i915 206216 1
drm 190080 2 i915
i2c_algo_bit 6996 1 i915
joydev 13312 0
snd_hda_codec_realtek 278132 1
btusb 15364 0
bluetooth 65668 1 btusb
fan 5656 0
uvcvideo 68316 0
videodev 42048 1 uvcvideo
v4l1_compat 18228 2 uvcvideo,videodev
v4l2_compat_ioctl32 10992 1 videodev
arc4 2192 2
vboxdrv 1723308 0
ecb 3536 2
snd_seq_dummy 3540 0
cpufreq_powersave 1872 2
sdhci_pci 9200 0
sdhci 20116 1 sdhci_pci
snd_seq_oss 36224 0
snd_hda_intel 31208 2
snd_hda_codec 82128 2 snd_hda_codec_realtek,snd_hda_intel
iwlagn 108980 0
snd_seq_midi_event 8592 1 snd_seq_oss
snd_seq 64640 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 8324 3 snd_seq_dummy,snd_seq_oss,snd_seq
cpufreq_ondemand 9256 0
mmc_core 61984 1 sdhci
snd_hwdep 9976 1 snd_hda_codec
iwlcore 112976 1 iwlagn
snd_pcm_oss 47328 0
snd_mixer_oss 20976 1 snd_pcm_oss
snd_pcm 90872 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
mac80211 211296 2 iwlagn,iwlcore
ohci1394 34180 0
sony_laptop 35224 0
psmouse 60404 0
snd_timer 25344 2 snd_seq,snd_pcm
uhci_hcd 27056 0
ehci_hcd 40668 0
i2c_i801 11632 0
acpi_cpufreq 10272 0
led_class 5112 2 sdhci,iwlcore
battery 14072 0
ieee1394 98880 1 ohci1394
rfkill 13108 5 iwlcore,sony_laptop
thermal 17712 0
video 24268 1 i915
output 3792 1 video
serio_raw 7188 0
snd 76744 15 snd_hda_codec_realtek,snd_seq_oss,snd_hda_intel,snd_hda_codec,snd_seq,snd_seq_device,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 8576 1 snd
snd_page_alloc 10784 2 snd_hda_intel,snd_pcm
cfg80211 78120 3 iwlagn,iwlcore,mac80211
pcspkr 3088 0
intel_agp 33104 1
usbcore 179376 5 btusb,uvcvideo,uhci_hcd,ehci_hcd
i2c_core 26816 4 i915,drm,i2c_algo_bit,i2c_i801
ac 5720 0
sky2 56820 0
button 7216 0
sg 33824 0
freq_table 4528 2 cpufreq_ondemand,acpi_cpufreq
iTCO_wdt 13648 0
iTCO_vendor_support 3828 1 iTCO_wdt
evdev 12928 14
processor 42064 3 acpi_cpufreq
rtc_cmos 13592 0
rtc_core 22212 1 rtc_cmos
rtc_lib 3120 1 rtc_core
ext4 256304 2
mbcache 8980 1 ext4
jbd2 69088 1 ext4
crc16 2096 1 ext4
sr_mod 19460 0
sd_mod 30696 4
cdrom 41288 1 sr_mod
ahci 40992 3
libata 192460 1 ahci
scsi_mod 131736 4 sg,sr_mod,sd_mod,libata
total used free shared buffers cached
Mem: 3907796 1913868 1993928 0 65068 1566872
-/+ buffers/cache: 281928 3625868
Swap: 2441872 0 2441872
success.
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
/usr/lib/pm-utils/sleep.d/55wicd suspend suspend: success.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: success.
/etc/pm/sleep.d/99laptop-mode suspend suspend: success.
/usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
success.
Thu Aug 13 22:39:50 UYT 2009: performing suspend
Thu Aug 13 22:40:10 UYT 2009: Awake.
Thu Aug 13 22:40:10 UYT 2009: Running hooks for resume
/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
/etc/pm/sleep.d/99laptop-mode resume suspend: success.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video resume suspend: success.
/usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
/usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
/usr/lib/pm-utils/sleep.d/55wicd resume suspend: success.
/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
/usr/lib/pm-utils/sleep.d/01grub resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
/usr/lib/pm-utils/sleep.d/00auto-quirk resume suspend: success.
Thu Aug 13 22:40:13 UYT 2009: Finished.
Please ask me for more info if needed.I had this issue for almost a year with my Sony CS190. After a clean install, it still exists. So,
After suspending the keyboard doesn't work, and unbinding/binding i8042 only helps touchpad, not keyboard.
EDIT: PS: Keyboard & Touchpad work fine after hibernate.
cat /var/log/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686
Current Operating System: Linux ArchTiger 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009 i686
Build Date: 04 September 2009 03:37:03PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 4 11:01:41 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0xec0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2a42:104d:903f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x000060f0/8
(--) PCI: (0:0:2:1) 8086:2a43:104d:903f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xd3400000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 2.8.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
IGDNG_M
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "DRI" "false"
(II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset
(--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset"
(II) intel(0): Output VGA1 using monitor section Monitor0
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1280x800
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(**) intel(0): Kernel mode setting active, disabling FBC.
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) Option "dpms" "true"
(**) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: Disabled
(WW) intel(0): Option "AccelMethod" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) config/hal: Adding input device Sony Vaio Keys
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Sony Vaio Keys: always reports core events
(**) Sony Vaio Keys: Device: "/dev/input/event10"
(II) Sony Vaio Keys: Found keys
(II) Sony Vaio Keys: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device PS/2 Generic Mouse
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event5"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Generic Mouse: (accel) set acceleration profile 0
(II) PS/2 Generic Mouse: initialized for relative axes.
(II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
(**) Logitech VoIP USB Dual RF Receiver: always reports core events
(**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event4"
(II) Logitech VoIP USB Dual RF Receiver: Found 12 mouse buttons
(II) Logitech VoIP USB Dual RF Receiver: Found x and y relative axes
(II) Logitech VoIP USB Dual RF Receiver: Found scroll wheel(s)
(II) Logitech VoIP USB Dual RF Receiver: Found keys
(II) Logitech VoIP USB Dual RF Receiver: Configuring as mouse
(II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
(**) Logitech VoIP USB Dual RF Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech VoIP USB Dual RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Logitech VoIP USB Dual RF Receiver: (accel) keeping acceleration scheme 1
(**) Logitech VoIP USB Dual RF Receiver: (accel) filter chain progression: 2.00
(**) Logitech VoIP USB Dual RF Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech VoIP USB Dual RF Receiver: (accel) set acceleration profile 0
(II) Logitech VoIP USB Dual RF Receiver: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
(**) Logitech VoIP USB Dual RF Receiver: always reports core events
(**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event3"
(II) Logitech VoIP USB Dual RF Receiver: Found keys
(II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device UVC Camera (05ca:183f)
(**) UVC Camera (05ca:183f): always reports core events
(**) UVC Camera (05ca:183f): Device: "/dev/input/event2"
(II) UVC Camera (05ca:183f): Found keys
(II) UVC Camera (05ca:183f): Configuring as keyboard
(II) XINPUT: Adding extended input device "UVC Camera (05ca:183f)" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event8"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event13"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event7"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): No memory allocations
(II) Sony Vaio Keys: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) PS/2 Generic Mouse: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): No memory allocations
(II) Sony Vaio Keys: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) PS/2 Generic Mouse: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) intel(0): Allocate new frame buffer 1024x768 stride 1024
(II) intel(0): Allocate new frame buffer 2960x1050 stride 3072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): No memory allocations
(II) Sony Vaio Keys: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) PS/2 Generic Mouse: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) config/hal: removing device AT Translated Set 2 keyboard
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) intel(0): Allocate new frame buffer 2960x800 stride 3072
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) intel(0): Allocate new frame buffer 2960x800 stride 3072
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) config/hal: removing device PS/2 Generic Mouse
(II) PS/2 Generic Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device PS/2 Generic Mouse
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event1"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Generic Mouse: (accel) set acceleration profile 0
(II) PS/2 Generic Mouse: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event5"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: removing device PS/2 Generic Mouse
(II) PS/2 Generic Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device SynPS/2 Synaptics TouchPad
(II) UnloadModule: "synaptics"
(II) config/hal: Adding input device PS/2 Generic Mouse
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event1"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Generic Mouse: (accel) set acceleration profile 0
(II) PS/2 Generic Mouse: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event5"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: removing device Sony Vaio Keys
(II) Sony Vaio Keys: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device Sony Vaio Keys
(**) Sony Vaio Keys: always reports core events
(**) Sony Vaio Keys: Device: "/dev/input/event10"
(II) Sony Vaio Keys: Found keys
(II) Sony Vaio Keys: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: removing device PS/2 Generic Mouse
(II) PS/2 Generic Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device SynPS/2 Synaptics TouchPad
(II) UnloadModule: "synaptics"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): No memory allocations
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Sony Vaio Keys: Device reopened after 1 attempts.
(II) config/hal: Adding input device PS/2 Generic Mouse
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event1"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Generic Mouse: (accel) set acceleration profile 0
(II) PS/2 Generic Mouse: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event5"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device AT Raw Set 2 keyboard
(**) AT Raw Set 2 keyboard: always reports core events
(**) AT Raw Set 2 keyboard: Device: "/dev/input/event12"
(II) AT Raw Set 2 keyboard: Found keys
(II) AT Raw Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Raw Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: removing device AT Raw Set 2 keyboard
(II) AT Raw Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device PS/2 Generic Mouse
(II) PS/2 Generic Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device SynPS/2 Synaptics TouchPad
(II) UnloadModule: "synaptics"
(II) config/hal: removing device Logitech VoIP USB Dual RF Receiver
(II) Logitech VoIP USB Dual RF Receiver: Close
(II) UnloadModule: "evdev"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): No memory allocations
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Sony Vaio Keys: Device reopened after 1 attempts.
(II) config/hal: removing device Logitech VoIP USB Dual RF Receiver
(II) Logitech VoIP USB Dual RF Receiver: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device PS/2 Generic Mouse
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event1"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Generic Mouse: (accel) set acceleration profile 0
(II) PS/2 Generic Mouse: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event3"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
(**) Logitech VoIP USB Dual RF Receiver: always reports core events
(**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event4"
(II) Logitech VoIP USB Dual RF Receiver: Found keys
(II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
(**) Logitech VoIP USB Dual RF Receiver: always reports core events
(**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event5"
(II) Logitech VoIP USB Dual RF Receiver: Found 12 mouse buttons
(II) Logitech VoIP USB Dual RF Receiver: Found x and y relative axes
(II) Logitech VoIP USB Dual RF Receiver: Found scroll wheel(s)
(II) Logitech VoIP USB Dual RF Receiver: Found keys
(II) Logitech VoIP USB Dual RF Receiver: Configuring as mouse
(II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
(**) Logitech VoIP USB Dual RF Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech VoIP USB Dual RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Logitech VoIP USB Dual RF Receiver: (accel) keeping acceleration scheme 1
(**) Logitech VoIP USB Dual RF Receiver: (accel) filter chain progression: 2.00
(**) Logitech VoIP USB Dual RF Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech VoIP USB Dual RF Receiver: (accel) set acceleration profile 0
(II) Logitech VoIP USB Dual RF Receiver: initialized for relative axes.
cat /var/log/kernel.log
Oct 4 13:33:04 ArchTiger kernel: PM: Syncing filesystems ... done.
Oct 4 13:33:04 ArchTiger kernel: Freezing user space processes ... (elapsed 0.00 seconds) done.
Oct 4 13:33:04 ArchTiger kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Oct 4 13:33:04 ArchTiger kernel: Suspending console(s) (use no_console_suspend to debug)
Oct 4 13:33:04 ArchTiger kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Oct 4 13:33:04 ArchTiger kernel: sd 0:0:0:0: [sda] Stopping disk
Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: PCI INT B disabled
Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PCI INT A disabled
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: PCI INT D disabled
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: PCI INT A disabled
Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PCI INT D disabled
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: PCI INT B disabled
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: PCI INT A disabled
Oct 4 13:33:04 ArchTiger kernel: [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Oct 4 13:33:04 ArchTiger kernel: ACPI: Preparing to enter system sleep state S3
Oct 4 13:33:04 ArchTiger kernel: Disabling non-boot CPUs ...
Oct 4 13:33:04 ArchTiger kernel: CPU 1 is now offline
Oct 4 13:33:04 ArchTiger kernel: SMP alternatives: switching to UP code
Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching NULL sched-domain.
Oct 4 13:33:04 ArchTiger kernel: CPU1 attaching NULL sched-domain.
Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching NULL sched-domain.
Oct 4 13:33:04 ArchTiger kernel: CPU1 is down
Oct 4 13:33:04 ArchTiger kernel: Extended CMOS year: 2000
Oct 4 13:33:04 ArchTiger kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Oct 4 13:33:04 ArchTiger kernel: Intel machine check architecture supported.
Oct 4 13:33:04 ArchTiger kernel: Intel machine check reporting enabled on CPU#0.
Oct 4 13:33:04 ArchTiger kernel: Back to C!
Oct 4 13:33:04 ArchTiger kernel: Extended CMOS year: 2000
Oct 4 13:33:04 ArchTiger kernel: Enabling non-boot CPUs ...
Oct 4 13:33:04 ArchTiger kernel: SMP alternatives: switching to SMP code
Oct 4 13:33:04 ArchTiger kernel: Booting processor 1 APIC 0x1 ip 0x6000
Oct 4 13:33:04 ArchTiger kernel: Initializing CPU#1
Oct 4 13:33:04 ArchTiger kernel: Calibrating delay using timer specific routine.. 5059.62 BogoMIPS (lpj=8429792)
Oct 4 13:33:04 ArchTiger kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Oct 4 13:33:04 ArchTiger kernel: CPU: L2 cache: 6144K
Oct 4 13:33:04 ArchTiger kernel: CPU: Physical Processor ID: 0
Oct 4 13:33:04 ArchTiger kernel: CPU: Processor Core ID: 1
Oct 4 13:33:04 ArchTiger kernel: Intel machine check architecture supported.
Oct 4 13:33:04 ArchTiger kernel: Intel machine check reporting enabled on CPU#1.
Oct 4 13:33:04 ArchTiger kernel: x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
Oct 4 13:33:04 ArchTiger kernel: CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching NULL sched-domain.
Oct 4 13:33:04 ArchTiger kernel: Switched to high resolution mode on CPU 1
Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching sched-domain:
Oct 4 13:33:04 ArchTiger kernel: domain 0: span 0-1 level MC
Oct 4 13:33:04 ArchTiger kernel: groups: 0 1
Oct 4 13:33:04 ArchTiger kernel: CPU1 attaching sched-domain:
Oct 4 13:33:04 ArchTiger kernel: domain 0: span 0-1 level MC
Oct 4 13:33:04 ArchTiger kernel: groups: 1 0
Oct 4 13:33:04 ArchTiger kernel: CPU1 is up
Oct 4 13:33:04 ArchTiger kernel: ACPI: Waking up from system sleep state S3
Oct 4 13:33:04 ArchTiger kernel: i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
Oct 4 13:33:04 ArchTiger kernel: i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd131d041)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xd670d570)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x5040)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x20200)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x3ff)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xd231d141)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xd560d460)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x6 (was 0x0, writing 0x30300)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xd331d241)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xd450d360)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x6 (was 0x0, writing 0x50400)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xd350d350)
Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
Oct 4 13:33:04 ArchTiger kernel: ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x4001)
Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd5700004)
Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd4600004)
Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406)
Oct 4 13:33:04 ArchTiger kernel: ohci1394 0000:06:02.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
Oct 4 13:33:04 ArchTiger kernel: ohci1394 0000:06:02.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xd3500900)
Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
Oct 4 13:33:04 ArchTiger kernel: pci 0000:06:02.2: restoring config space at offset 0x4 (was 0x0, writing 0xd3500800)
Oct 4 13:33:04 ArchTiger kernel: pci 0000:06:02.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
Oct 4 13:33:04 ArchTiger kernel: i915 0000:00:02.0: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:02.1: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: usb usb3: root hub lost power or was reset
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: usb usb4: root hub lost power or was reset
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: usb usb5: root hub lost power or was reset
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: usb usb6: root hub lost power or was reset
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: usb usb7: root hub lost power or was reset
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: ahci 0000:00:1f.2: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: Radio Frequency Kill Switch is On:
Oct 4 13:33:04 ArchTiger kernel: Kill switch must be turned off for wireless networking to work.
Oct 4 13:33:04 ArchTiger kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[d3500000-d35007ff] Max Packet=[2048] IR/IT contexts=[4/4]
Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: Will use DMA mode even though HW doesn't fully claim to support it.
Oct 4 13:33:04 ArchTiger kernel: pci 0000:06:02.2: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: sd 0:0:0:0: [sda] Starting disk
Oct 4 13:33:04 ArchTiger kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 4 13:33:04 ArchTiger kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Oct 4 13:33:04 ArchTiger kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Oct 4 13:33:04 ArchTiger kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 4 13:33:04 ArchTiger kernel: ata1.00: configured for UDMA/133
Oct 4 13:33:04 ArchTiger kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Oct 4 13:33:04 ArchTiger kernel: pm_op(): usb_dev_resume+0x0/0x30 [usbcore] returns -19
Oct 4 13:33:04 ArchTiger kernel: PM: Device 5-1 failed to resume: error -19
Oct 4 13:33:04 ArchTiger kernel: pm_op(): usb_dev_resume+0x0/0x30 [usbcore] returns -19
Oct 4 13:33:04 ArchTiger kernel: PM: Device 5-1.1 failed to resume: error -19
Oct 4 13:33:04 ArchTiger kernel: pm_op(): usb_dev_resume+0x0/0x30 [usbcore] returns -19
Oct 4 13:33:04 ArchTiger kernel: PM: Device 5-1.2 failed to resume: error -19
Oct 4 13:33:04 ArchTiger kernel: Restarting tasks ... <6>usb 5-1: USB disconnect, address 2
Oct 4 13:33:04 ArchTiger kernel: usb 5-1.1: USB disconnect, address 3
Oct 4 13:33:04 ArchTiger kernel: done.
Oct 4 13:33:04 ArchTiger kernel: usb 5-1.2: USB disconnect, address 4
Oct 4 13:33:05 ArchTiger kernel: i8042.c: Detected active multiplexing controller, rev 1.1.
Oct 4 13:33:05 ArchTiger kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
Oct 4 13:33:05 ArchTiger kernel: sky2 eth0: enabling interface
Oct 4 13:33:05 ArchTiger kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 4 13:33:05 ArchTiger kernel: iwlagn 0000:03:00.0: Radio disabled by HW RF Kill switch
Oct 4 13:33:05 ArchTiger kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Oct 4 13:33:05 ArchTiger kernel: wlan0: Failed to config new BSSID to the low-level driver
Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 try 1
Oct 4 13:33:05 ArchTiger kernel: CPU0 attaching NULL sched-domain.
Oct 4 13:33:05 ArchTiger kernel: CPU1 attaching NULL sched-domain.
Oct 4 13:33:05 ArchTiger kernel: CPU0 attaching sched-domain:
Oct 4 13:33:05 ArchTiger kernel: domain 0: span 0-1 level MC
Oct 4 13:33:05 ArchTiger kernel: groups: 0 1
Oct 4 13:33:05 ArchTiger kernel: CPU1 attaching sched-domain:
Oct 4 13:33:05 ArchTiger kernel: domain 0: span 0-1 level MC
Oct 4 13:33:05 ArchTiger kernel: groups: 1 0
Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 try 2
Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 try 3
Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 timed out
Oct 4 13:33:06 ArchTiger kernel: psmouse serio22: ID: 10 00 64
Oct 4 13:33:06 ArchTiger kernel: sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
Oct 4 13:33:06 ArchTiger kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Oct 4 13:33:07 ArchTiger kernel: input: PS/2 Generic Mouse as /devices/platform/i8042/serio22/input/input23
Oct 4 13:33:07 ArchTiger kernel: Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000
Oct 4 13:33:07 ArchTiger kernel: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio24/input/input24
Oct 4 13:33:08 ArchTiger kernel: ata2.00: qc timeout (cmd 0xef)
Oct 4 13:33:08 ArchTiger kernel: ata2.00: failed to set xfermode (err_mask=0x4)
Oct 4 13:33:09 ArchTiger kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 4 13:33:09 ArchTiger kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Oct 4 13:33:09 ArchTiger kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Oct 4 13:33:09 ArchTiger kernel: ata2.00: configured for UDMA/33
Oct 4 13:33:09 ArchTiger kernel: ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x18 t4
Oct 4 13:33:09 ArchTiger kernel: ata2: irq_stat 0x40000001
Oct 4 13:33:09 ArchTiger kernel: ata2: EH complete
Oct 4 13:33:10 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
Oct 4 13:33:17 ArchTiger kernel: eth0: no IPv6 routers present
Oct 4 13:33:29 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 1 bytes away.
Oct 4 13:33:30 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
Oct 4 13:33:32 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
Oct 4 13:34:04 ArchTiger kernel: usb 5-1: new full speed USB device using uhci_hcd and address 5
Oct 4 13:34:04 ArchTiger kernel: usb 5-1: configuration #1 chosen from 1 choice
Oct 4 13:34:04 ArchTiger kernel: hub 5-1:1.0: USB hub found
Oct 4 13:34:04 ArchTiger kernel: hub 5-1:1.0: 2 ports detected
Oct 4 13:34:04 ArchTiger kernel: usb 5-1.1: new full speed USB device using uhci_hcd and address 6
Oct 4 13:34:05 ArchTiger kernel: usb 5-1.1: configuration #1 chosen from 1 choice
Oct 4 13:34:05 ArchTiger kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input25
Oct 4 13:34:05 ArchTiger kernel: generic-usb 0003:046D:C51C.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:1d.0-1.1/input0
Oct 4 13:34:05 ArchTiger kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input26
Oct 4 13:34:05 ArchTiger kernel: generic-usb 0003:046D:C51C.0004: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:1d.0-1.1/input1
Oct 4 13:34:05 ArchTiger kernel: usb 5-1.2: new full speed USB device using uhci_hcd and address 7
Oct 4 13:34:05 ArchTiger kernel: usb 5-1.2: configuration #1 chosen from 1 choice
cat /var/log/pm-suspend.log
Initial commandline parameters:
Sun Oct 4 13:34:08 EDT 2009: Running hooks for suspend.
/usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: Adding quirks from HAL: --quirk-dpms-on --quirk-dpms-suspend --quirk-vbe-post --quirk-vbemode-restore --quirk-vbestate-restore --quirk-vga-mode-3
success.
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux ArchTiger 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009 i686 Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz GenuineIntel GNU/Linux
Module Size Used by
sony_laptop 29520 0
vboxdrv 134376 0
ipv6 277876 14
fuse 60896 2
fan 4392 0
msr 3240 0
cpufreq_ondemand 7672 2
acpi_cpufreq 8624 0
freq_table 3716 2 cpufreq_ondemand,acpi_cpufreq
snd_seq_dummy 2696 0
snd_seq_oss 31168 0
snd_seq_midi_event 7012 1 snd_seq_oss
snd_seq 53744 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
arc4 1732 2
ecb 2788 2
iwlagn 95208 0
sdhci_pci 7300 0
sdhci 17128 1 sdhci_pci
iwlcore 96132 1 iwlagn
mac80211 182976 2 iwlagn,iwlcore
snd_pcm_oss 40352 0
ohci1394 30196 0
mmc_core 52704 1 sdhci
snd_mixer_oss 17540 1 snd_pcm_oss
led_class 3976 2 sdhci,iwlcore
ieee1394 85324 1 ohci1394
battery 10984 0
ac 4360 0
cfg80211 67364 3 iwlagn,iwlcore,mac80211
rfkill 10640 5 sony_laptop,iwlcore
thermal 13888 0
button 5556 0
snd_hda_codec_realtek 206568 1
snd_usb_audio 86304 3
snd_usb_lib 17252 1 snd_usb_audio
snd_rawmidi 21856 1 snd_usb_lib
snd_seq_device 6768 4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
i915 184872 2
processor 35864 3 acpi_cpufreq
joydev 10400 0
drm 154656 2 i915
snd_hda_intel 26664 2
snd_hda_codec 71716 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 7656 2 snd_usb_audio,snd_hda_codec
snd_pcm 73512 6 snd_pcm_oss,snd_usb_audio,snd_hda_intel,snd_hda_codec
snd_timer 21100 2 snd_seq,snd_pcm
snd 58436 21 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_realtek,snd_usb_audio,snd_rawmidi,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
snd_page_alloc 8876 2 snd_hda_intel,snd_pcm
usbhid 40608 0
hid 42496 1 usbhid
i2c_algo_bit 5864 1 i915
uvcvideo 61040 0
videodev 36544 1 uvcvideo
v4l1_compat 15688 2 uvcvideo,videodev
video 19832 1 i915
btusb 12632 0
bluetooth 56676 1 btusb
output 2884 1 video
psmouse 59644 0
i2c_i801 9656 0
i2c_core 22776 4 i915,drm,i2c_algo_bit,i2c_i801
intel_agp 27484 1
agpgart 32756 2 drm,intel_agp
sg 27928 0
iTCO_wdt 10952 0
iTCO_vendor_support 3080 1 iTCO_wdt
serio_raw 5704 0
bridge 54008 0
sky2 47240 0
evdev 10176 19
stp 2088 1 bridge
llc 5552 2 bridge,stp
tun 13572 0
soundcore 6784 1 snd
rtc_cmos 11212 0
rtc_core 18048 1 rtc_cmos
rtc_lib 2500 1 rtc_core
ext3 134380 3
jbd 48504 1 ext3
mbcache 7080 1 ext3
sr_mod 16612 0
cdrom 36032 1 sr_mod
sd_mod 27328 5
uhci_hcd 23540 0
ehci_hcd 36112 0
usbcore 150160 8 snd_usb_audio,snd_usb_lib,usbhid,uvcvideo,btusb,uhci_hcd,ehci_hcd
ahci 34004 4
libata 168044 1 ahci
scsi_mod 110708 4 sg,sr_mod,sd_mod,libata
total used free shared buffers cached
Mem: 2980024 2880848 99176 0 108764 2400148
-/+ buffers/cache: 371936 2608088
Swap: 1052216 0 1052216
success.
Let me know, if you need any other output.
Thanks
Last edited by Sir_Leon (2009-10-04 17:56:47) -
Bluetooth keyboard not working after 10.7.2 update
Just got around to installing the 10.7.2 update this morning, and afterwards could not connect my Apple bluetooth keyboard. I've also had some difficulty with my Apple mightymouse (yes, it's old, but I love it). I tried restarting with the keyboard and mouse off and trying to re-connect using the Bluetooth preferences, both SMC reset and PRAM reset, repairing disk permissions, and all of the suggestions on this thread: https://discussions.apple.com/message/16377827#16377827
So far nothing has worked. My mouse began working again after the initial restart with both bluetooth devices off, but the keyboard isn't being detected in either the Keyboard setup or the Bluetooth setup assistance. The keyboard, however, was detected by my iPad, and was working with this computer before the update. I've made sure that the bluetooth on my iPad is off so as not to confuse it, and it's still not working.Well, I found a solution. After removing the bluetooth preferences as directed in this article (which didn't help me, but might somoeone else): http://ismashphone.com/2011/08/how-to-fix-bluetooth-pairing-in-mac-os-x-lion-iss ues.html
There was a software update that fixed this. Thank goodness. So if like me you're just getting around to doing the update, after the big 10.7.2 one, check software update again. I assumed it would be all rolled in to the same update, but that was not the case. -
MacBook pro Keyboard not working after coffee spillage. Possible replacement?
Hi there,
4 days ago I spilled coffee (nescafe with sugar, no milk) over my Macbook (mid 2012 non-retina). I turned it off instantly and I've put it upside down. Then I opened it and I started to dry the notebook.
I had few attempts to turn on over the weekend, only one successful, so I gave it a rest until today.
Today I did complete teardown of the laptop with a friend, I sprayed all of the parts with special electronic-contact spray and I was able to turn it on sucessfully.
However I figured out that when I turn the laptop with keyboard connected (regular MacBook keyboard, not external), then there were 90% chances that it will turn off before even booting.
So I spilled ethanol over the keyboard few times, sprayed with the same spray, but no luck. It seems the keyboard is making some non-desired contacts with some electronic part.
The laptop is working without a keyboard, but I would like to change it if possible.
Is there a possibility to change the keyboard? I don't have official Apple store in my country, so I was thinking maybe ordering from ebay. Any suggestions on where I can order a keyboard?Is there a possibility to change the keyboard?
I don't have official Apple store in my country
AS are not the only places that repair Macs. Check out the following & do the necessary...
AASP
International AASP’s & Other Services
AASP's Outside of the USA
How to find your nearest Apple Authorized Service Provider (AASP)
Any suggestions on where I can order a keyboard?
Do a Google or Bing search for your model MBP which you did not indicate. Check out the iFixit website.
==============
Liquid Spill
If you believe you’ve spilled anything (water, soda, trendy energy drink, etc.) on your Apple notebook, shut it down immediately, lest you continue short-circuiting your computer and thus blasting small holes through its components. Just because your computer works for a while after you’ve spilled liquid on it doesn’t mean you’re in the clear. Damage from liquid spills start out small and difficult to diagnose, and then over time spreads to become larger functional issues.
The best thing to do in this case is to take your Mac to an Apple-authorized service center. But if you are feeling handy and are OK with voiding your AppleCare warranty (AppleCare does not cover accidental damage), you can clean your computer yourself. Unplug it, open it up, and disconnect the battery and all connections to the logic board. Then sit the open computer by a fan while gently scrubbing all sections of the logic board with cotton swabs and isopropyl alcohol. Clean both the top and bottom of the logic board if possible, then let the exposed MacBook dry in the path of the fan overnight before piecing everything back together and turning the computer back on. With any luck, the crisis will be over.
http://www.macworld.com/article/2030013/advice-from-an-apple-tech-three-common-m ac-fixes.html -
Bluetooth keyboard not working after sleep *windows8* FIX
Its pretty simple actually. It might not work for you, but let me know if it does. Untill bootcamp drivers are updated, I found that disabling the Bluetooth Network adater under Networking And Sharing in the control panel will allow my Keyboard to function again after waking up. If you find that your keyboard is still paired, but not responding when your Windows 8 install wakes up after sleep, this might fix the problem for now.
If you have a notebook, I read on another forum that if you enable Bluetooth Collaboration under the device settings in Device Manager, you can fix this issue also. Google for it if your interested.I've noticed on mine that if it is coming out of Ssafe Sleep (you can see the progress bar at the bottom of the screen if it is) then the keyboard does take a bit to active.
This may not be your problem however just be sure you've been patient enough after waking.
Maybe you are looking for
-
Printing multiple pages per sheet on Adobe Reader for Windows 8
I cannot print multiple pages per sheet on Adobe Reader touch for windows 8.1
-
Our shop has a lot of apps written in java and ruby, and I'm trying to integrate with these apps to perform standard operations without rewriting a ton of code. One problem I have with java is that stdout or console does not show up from our PS envir
-
[SOLVED]Compton, Conky and RXVT-Unicode not playing nicely
Hello. I'm having some problems making my desktop how I want it. My window manager is fluxbox. First problem is just a minor inconvenience, but annoying. When I login, a transparent terminal spawns to my specification, but it is skewed. http://i.imgu
-
HT5167 downgrade to lion 10.7.4
Hey everyone and Merry Christmas!! I recently bought a second hand Mac Pro. It had Lion 10.7.4 installed, but I needed to upgrade the hard drive. In doing so, and being new to mac, I lost the recovery HD section (which at the time I didn't even know
-
Taking too long for Loaded data visible in Reporting
Hi experts, I have a cost center cube, which takes very very long to show the " Loaded data is not yet visible in Reporting " icon for the request. I donot have aggregate on the cube and no other requests are Red /yellow. What is the reason for this