T42 Thinkpad Hibernation sheet missing in power options
Dear All!
I have T42 thinkpad notebook with following specifications
OS: XP SP2
H.Disk: 32.6 GB
RAM: 1GB
Processor: 1.7GHz
Notebook was reinstalled with Access IBM option. Initially Hibernation sheet was available in power option properties (Control Panel option) but now it is disappeared. Hibernation/Standby option is not working at the moment.
Kindly help me to fix this bug.
Hi waqas,
have you check the bios setup? maybe upon reinstalling the Access IBM also the bios was reset to defaults.Or try re-installing the OS but this time using a fresh Windows XP or Vista version,it should be working after..
if problem occur get the latest sytem updates given by lenovo sites..
>neo
Similar Messages
-
Power Options "Close Lid" selection missing
I've seen numerous posts all over the Internet about people having the "When I close the lid" option missing from their Power Options in Control Panel, this usually goes hand in hand with the Hibernate tab missing. I have a user with this issue and I've found no one that has resolved this. Lenovo, is this something you're aware of? Do you have a fix? I have a VP that's ready to switch to HP or Dell because of this issue. Please let me know if you have any suggestions.
The model is a T60.To make hibernation available, follow these steps:
Click Start, and then type cmd in the Start Search box.
In the search results list, right-click Command Prompt, and then click Run as Administrator.
When you are prompted by User Account Control, click Continue.
At the command prompt, type powercfg.exe /hibernate on, and then press ENTER.
Type exit, and then press ENTER to close the Command Prompt window.
T520 4239-CTO
T61/p 6459-CTO (Gone but not forgotten)
A31/p XP Pro 1 gig memory
A30/p XP Pro 1 gig memory
TP600 Win 2K 288 mb memory
701C Win 98 Don't ask -
Satellite P10-804: Toshiba Power Options - How to disable Hibernation
Model SP10 - 804
How do I disable the Hibernation feature ?
The box 'Enable Hibernation' is ticked and greyed so I cannot untick it !
I don't use this feature and would like to delete the file hiberfil.sys which is over 1GB.
I understand that by disabling Hibernation this file should delete. I read about it here:
http://www.softwarepatch.com/tips/hiberfil-sys-xp.html
Thanks in advance.Hi
I presume the Toshiba Power saver utility was installed on your system.
In such case the Windows own power options are disabled and the TPS controls the hibernation and standby mode.
You can switch back to the window power mode in the control panel -> power options.
There you have to choose to another power scheme as the Toshiba power saver.
Otherwise you can remove the TPS from the system!
However, in my opinion the hiberfil.sys has no bad influence on the system and it's really not necessary to delete this file.
On my system the file size was never ever 1GB. -
ThinkPad Power Plan in Power Options
Hello,
in Control Panel > Power Options there was ThinkPad Power Plan since i made clean installation of Windows 7 not upgrade.. does anyone know where can i get that option ?
thank you.
+ ThinkPad X201 3626-FBG / Intel Core i5 M520 2.4Ghz / DDR3 8Gb / Intel SSD 730 Series 240Gb / 12.1" WXGA 1280x800px / Dual boot Win7 Pro x64 - Ubuntu 14.04 LTS 64bit + X200 Ultrabase + ThinkVision L2250pHi priority,
did you install the powermanagement driver and Lenovo powermanger?
If not, please install it.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español -
Lenovo ThinkPad Power Manager/ Windows Power Options Issue: Display Re-awakens Immediately
I want to share my experience with setting idle timers under Lenovo Power Manager or Windows Power Options, respectively.
I noticed that every time the monitor just had dimmed or shut off according to my power savings options, it brightened up or turned on again only a few seconds later.
I had seen the same behavior before using my Dell Latitude laptop, so I came up with the solution relatively quickly this time.
The interference was caused by a Logitech wireless mouse, even though all drivers were installed correctly and the mouse was working flawlessly.
Installing the Logitech SetPoint firmware solved the problem in both cases without further steps being necessary.
Maybe this note will help other users facing the same issue. Good luck.
Solved!
Go to Solution.Problem solved (see above).
-
Is it possible to set GRoup Policy to prevent users manually changing Power Options?
Hello,
We use Dell laptops and there is a very well known issue that certain models freeze when they are docked.
I have adjusted the power settings under high performance plan, and updated this in the group policy, which I have tested and is all fine.
Basically, on the laptops now, the users can still change it from the GPO plan to balanced or power saver if they want to.
Is there a way of setting group policy so the other power options are greyed out or cannot be used?
Thanks!Hi!
If the user is a local administrator on the client they will be able to change the plans. (They changes will be reverted when logging off though)
But if they are standard users, it should be grayed out already.
Check this link for more information, if there is a step that you might have missed when configuring the GPO. (Three pages/Parts)
http://blogs.technet.com/b/askds/archive/2008/03/21/managing-power-with-group-policy-part-3-of-3.aspx
Best regards
Andreas Molin
Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin -
Can't find battery power option for time machine
I'm semi new to macs. I've been messing around with my wife's for the last week or so.
I first upgraded her OS to 10.5. After the initial upgrade I was given both the
a) battery power option and
b) time machine in menu bar option.
Unfortunately after messing around with her sparesimage I corrupted it and had to do a clean install last night. After this clean install these two time machine options are missing.
Can anybody lead me in the right direction on how to restore both of these options?
Working with a Macbook with an intel processor. Pretty sure last night did all the software and OS updates, so I should be running 10.5.5.a) I don't need my laptop's battery status... I want the option to disable time machine backups when my computer is running on battery power.
b) As my original post states, that option is no longer on the Time Machine preferences screen. It has disappears since I re installed the OS. -
"Sleep" option disappeared from power options???
So I have my laptop's power options for closing the lid to sleep, but instead of going to sleep each time I close the lid, it is instead going into hibernation every single time. When I try to fix the issue, the whole "Sleep" option is not even
listed under Power Options > Advanced Settings > Power buttons and lid > Lid close action.
From the drop-down menu, the only three options I see are "Do nothing," "Hibernate," and "Shut down."
WTF is going on?Hi,
Meanwhile, are you able to find the sleep option in other location? Such as in the power button?
Regarding to the driver, I suggest you uninstall the original driver, then reboot mahcine, it will automatically install the driver again, check if issue persists.
Check your power management settings in BIOS, make sure that sleep mode is turned on in BIOS, It's recommended to refer to the manufacture user manual.
Update the BIOS, make sure to have the latest BIOS version
Yolanda Zhu
TechNet Community Support -
While creating Table it shows error as 'missing or invalid option
I had log on to ap/ap@vis in sqlplus and try to create table but showing error.....here below is the table
Create table Purchase_Order
(Item varchar2(10),
Item_Desc varchar2(100),
Item_Cost Number(7),
Item_Qty Number(7),
Item_Date Date,
Need_by_date date,
Last_updated_date date,
last_updated_by number(10),
creation_date date,
created_by number(10),
Attributed_category varchar2(100),
attribute1 varchar2(100),
attribute2 varchar2(100),
attribute3 varchar2(100),
attribute4 varchar2(100),
attribute5 varchar2(100),
attribute6 varchar2(100));
But it showing error as ORA-00922:missing or invalid optionIt works for me
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> Create table Purchase_Order
2 (Item varchar2(10),
3 Item_Desc varchar2(100),
4 Item_Cost Number(7),
5 Item_Qty Number(7),
6 Item_Date Date,
7 Need_by_date date,
8 Last_updated_date date,
9 last_updated_by number(10),
10 creation_date date,
11 created_by number(10),
12 Attributed_category varchar2(100),
13 attribute1 varchar2(100),
14 attribute2 varchar2(100),
15 attribute3 varchar2(100),
16 attribute4 varchar2(100),
17 attribute5 varchar2(100),
18 attribute6 varchar2(100));
Table created.
SQL> -
ORA - 00922 Missing or Invalid option error while creating table
I am tryin to create a table with the following syntax
1 CREATE TABLE TEST_FOR_SCRIPT (
2 TEST_A NUMBER NOT NULL
3 ,TEST_B VARCHAR2(30) DEFAULT 'UNDEFINED' NOT NULL
4 )
5* @storage_parms_table_cmn
6 /
@storage_parms_table_cmn
ERROR at line 5:
ORA-00922: missing or invalid option
Here, storage_parms_table_cmn.sql reads like this
tablespace DBK_CMN_DATA
Can anyone please guide me how to overcome this error.What is your Oracle Version?
i can do it exactly what you did without error
sql> CREATE TABLE vd.TEST_FOR_SCRIPT (
2 TEST_A NUMBER NOT NULL
3 ,TEST_B VARCHAR2(30) DEFAULT 'UNDEFINED' NOT NULL
4 )
5 @test1.sql
6 /
Table created.
Cheers
http://fiedizheng.blogspot.com/ -
Failed to create DNS with ODBC Datadirect Driver - error missing or invalid option
Dear All,
I tried to post a first time and get my post thrown away. So please just tell me if that's not the place to post such questions. I tried this forum because I didn't find any revelant information yet on internet.
I installed Informatica and Oracle 11g, tried to create my DSN with the Driver DataDirect Oracle Wire Protocol. I keep bumping into the message " [Informatica][ODBC Oracle wire protocol driver][Oracle] ora-00922: missing or invalid option".
Can you please help to understand where the error comes from?
Here are my current status :
* My table in the Oracle database is created with every field followed by NOT NULL option, the table is successfully created.
* The connection to the Oracle database using Oracle TNSNames Connection server name and TNSNames files seem to work, I tried to connect with another driver Oracle in OraDB 11g_home1. This one succeeds.
* Listener.ora:
# listener.ora Network Configuration File: C:\app\ql186003\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\app\ql186003\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\app\ql186003\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ADR_BASE_LISTENER = C:\app\ql186003
* Running lsnrctl STATUS:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date 22-FEB-2014 21:43:22
Uptime 0 days 1 hr. 8 min. 33 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\app\ql186003\product\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File c:\app\ql186003\diag\tnslsnr\WBEQL186003-Q4G\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "TESTDBXDB" has 1 instance(s).
Instance "testdb", status READY, has 1 handler(s) for this service...
Service "TEST_DB" has 1 instance(s).
Instance "testdb", status READY, has 1 handler(s) for this service...
Service "orcl.TD.TERADATA.COM" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.TD.TERADATA.COM" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
Thank you very much for any guidance.
QiongHi,
Try this :
While creating TYPE remove semi colon from end of the statement and also dont use extra / as / means execute last statement so you may encounter error..
CREATE TYPE ind_tab_supplier1 IS VARRAY(6) OF VARCHAR2(30)
/ -
IFS Install (Config) Fails with "ORA-00922: missing or invalid option"
Greetings:
Thanks for your help in advance...
Towards the end of IFS installation, I get the following error in my
IfsConfigOut.log file (This happens towards the end of the installation). I
am Installing IFS on Oracle 9i (9.0.1.1 version) instance on Win 2K (P-III,
800Mhz, 512Mb) . After this installation error, all the 9iFS directories
and nodes are detected under OEM but when I start the domain I get no
response for the same.
ConfigOut File pasted below
CONFIGURATION: SCHEMA CREATION TYPE
Configuring Oracle Internet File System 9.0.1.1.0 configuration started on:
Mon May 20 09:45:28 GMT+05:30 2002
saving user configuration settings to file:
saving:E:\oracle\ora90\9ifs\settings\oracle\ifs\installer\properties\IfsConf
ig.properties
saving:
E:\oracle\ora90\9ifs\settings\oracle\ifs\server\properties\IfsDefault.proper
ties
Old schema name in IfsDefault.properties file = ifssys
New schema name pointing to now = IFSSYS
Create Schema = true
Upgrading Schema = false
Pointing to same schema as the old entry in IfsDefault.properties file =
true
Checking DC entries
RUN DC = true
Adding section for DC as there does not exist a section already
Checking Node entries
RUN NODE = true
Adding Node section = Node
saving: E:\oracle\ora90\9ifs\settings\Node.def
saving: E:\oracle\ora90\9ifs\settings\HttpNode.def
saving: E:\oracle\ora90\9ifs\settings\DomainController.def
executing command:
Empty command. Not executing
executing command:
Empty command. Not executing
executing command:
Empty command. Not executing
creating database user (schema): IFSSYS
java.sql.SQLException: ORA-00922: missing or invalid option
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
at oracle.jdbc.oci8.OCIDBAccess.check_error(OCIDBAccess.java, Compiled
Code)
at oracle.jdbc.oci8.OCIDBAccess.executeFetch(OCIDBAccess.java, Compiled
Code)
at oracle.jdbc.oci8.OCIDBAccess.parseExecuteFetch(OCIDBAccess.java,
Compiled Code)
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java,
Compiled Code)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java,
Compiled Code)
at
oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java
, Compiled Code)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java,
Compiled Code)
at oracle.ifs.utils.sql.SQLCommands.createUser(SQLCommands.java:352)
at
oracle.ifs.installer.IfsConfiguration$CreateSchemaAction.createIfsSchema(Ifs
Configuration.java:546)
at
oracle.ifs.installer.IfsConfiguration$CreateSchemaAction.perform(IfsConfigur
ation.java:476)
at oracle.ifs.utils.action.ActionQueue.performActions(ActionQueue.java,
Compiled Code)
at oracle.ifs.utils.action.ActionQueue.run(ActionQueue.java:230)
at java.lang.Thread.run(Thread.java:479)
recording that configuration failed
saving:E:\oracle\ora90\9ifs\settings\oracle\ifs\installer\properties\IfsConf
ig.properties
iFS configuration failed; the following error occurred:
oracle.ifs.utils.action.ActionFailedException: java.sql.SQLException:
ORA-00922: missing or invalid option
at
oracle.ifs.installer.IfsConfiguration$CreateSchemaAction.perform(IfsConfigur
ation.java:526)
at oracle.ifs.utils.action.ActionQueue.performActions(ActionQueue.java,
Compiled Code)
at oracle.ifs.utils.action.ActionQueue.run(ActionQueue.java:230)
at java.lang.Thread.run(Thread.java:479)
configuration failed on Mon May 20 09:45:35 GMT+05:30 2002Problem is Fixed !!!
We were having this problem because IFS installation was not recognising a separate tablespace which we created for IFS, so we started using default USERS tablespace after which the installation was successful.
Thanks. -
ORA-00922: missing or invalid option
I am using oracle 10g datbase.
and trying to create a list of tables of 300 tables - a sampel is given below
CREATE TABLE "SCHM1"."HOLIDAYS"
( "DATE" DATE NOT NULL ENABLE,
"DESCR" VARCHAR2(40),
"EXTRA_HOURS" NUMBER(2,0),
"HOLIDAY_GROUP" VARCHAR2(5) NOT NULL ENABLE,
"CREATED_BY" VARCHAR2(12),
"CREATED_ON" DATE,
"AMENDED_BY" VARCHAR2(12),
"AMENDED_ON" DATE,
CONSTRAINT "BANK_HOLIDAYSP1" PRIMARY KEY ("DATE", "HOLIDAY_GROUP")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 32768 NEXT 32768 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "SCHM1_REF_INDEXES1" ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 32768 NEXT 32768 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "SCHM1_REF_DATA1"
CREATE TABLE "SCHM1"."LODGEMENT"
( "BANK_LODGEMENT" NUMBER(10,0) NOT NULL ENABLE,
"LODGEMENT_SLIP" NUMBER(12,0),
"BRANCH" NUMBER(4,0),
"EMPLOYEE" VARCHAR2(12),
"LODGEMENT_DATIM" DATE,
"SYS_DATIM" DATE,
"TILL_DAT" DATE,
"POSTED_FLG" VARCHAR2(1),
"EMERGENCY_FLG" VARCHAR2(1),
"CREATED_BY" VARCHAR2(12),
"CREATED_ON" DATE,
"AMENDED_BY" VARCHAR2(12),
"AMENDED_ON" DATE,
"LODGEMENT_GRP" NUMBER,
CONSTRAINT "BANK_LODGEMENTP1" PRIMARY KEY ("BANK_LODGEMENT")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 32768 NEXT 32768 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "SCHM1_INDEXES10" ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 32768 NEXT 32768 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "SCHM1_DATA10"
when I executed this in sql window i get the error:
ORA-00922: missing or invalid option
when I run it from command prompt ,
i get error like
SP2-0734: unknown command beginning "USING INDE..." - rest of line ignored.
SP2-0734: unknown command beginning "STORAGE(IN..." - rest of line ignored.
SP2-0734: unknown command beginning "PCTINCREAS..." - rest of line ignored.
SP2-0734: unknown command beginning "TABLESPACE..." - rest of line ignored.
SP2-0044: For a list of known commands enter HELP
and to leave enter EXIT.
and it doesn't create the table. CAn someone let em know how I to create log of errors on execution so taht the session can be resumed and also
help me in finding the error in this.
Cheers
Edited by: user1000979 on 02-Sep-2009 06:50Hi!
there is just missing a sql terminator between the statements ...
it is not a internal sql language ...
i have no problems when execute it in sql*plus.
tested with oracle 8i and XE
CREATE TABLE "SCHM1"."HOLIDAYS"
( "DATE" DATE NOT NULL ENABLE,
"DESCR" VARCHAR2(40),
"EXTRA_HOURS" NUMBER(2,0),
"HOLIDAY_GROUP" VARCHAR2(5) NOT NULL ENABLE,
"CREATED_BY" VARCHAR2(12),
"CREATED_ON" DATE,
"AMENDED_BY" VARCHAR2(12),
"AMENDED_ON" DATE,
CONSTRAINT "BANK_HOLIDAYSP1" PRIMARY KEY ("DATE", "HOLIDAY_GROUP")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 32768 NEXT 32768 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "SCHM1_REF_INDEXES1" ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 32768 NEXT 32768 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "SCHM1_REF_DATA1"
CREATE TABLE "SCHM1"."LODGEMENT"
( "BANK_LODGEMENT" NUMBER(10,0) NOT NULL ENABLE,
"LODGEMENT_SLIP" NUMBER(12,0),
"BRANCH" NUMBER(4,0),
"EMPLOYEE" VARCHAR2(12),
"LODGEMENT_DATIM" DATE,
"SYS_DATIM" DATE,
"TILL_DAT" DATE,
"POSTED_FLG" VARCHAR2(1),
"EMERGENCY_FLG" VARCHAR2(1),
"CREATED_BY" VARCHAR2(12),
"CREATED_ON" DATE,
"AMENDED_BY" VARCHAR2(12),
"AMENDED_ON" DATE,
"LODGEMENT_GRP" NUMBER,
CONSTRAINT "BANK_LODGEMENTP1" PRIMARY KEY ("BANK_LODGEMENT")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 32768 NEXT 32768 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "SCHM1_INDEXES10" ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 32768 NEXT 32768 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "SCHM1_DATA10"
/Regards -
ORA-00922: missing or invalid option in create seq, trigger
Hi All,
I am trying to create a table, sequence, and trigger with the following SQL and am getting the error:
ORA-00922: missing or invalid option
CREATE TABLE "DATA_INVENTORY"
( "ID" INTEGER NOT NULL ENABLE,
"COE_CONTRACT_NUM" VARCHAR2(30),
"PROJ_AREA" VARCHAR2(30),
"STATE" VARCHAR2(30),
"DATA_DATE" VARCHAR2(30) NOT NULL ENABLE,
"NUM_OF_MEDIA" NUMBER,
"DATA_TYPE" VARCHAR2(30)NOT NULL ENABLE,
"MEDIA_TYPE" VARCHAR2(30)NOT NULL ENABLE,
"EXTERNAL_DRIVE_DESCR" VARCHAR2(200),
"ROOM_NUM" VARCHAR2(10)NOT NULL ENABLE,
"DRAWER_NUM" VARCHAR2(30),
"PROJ_CODE" VARCHAR2(30),
"COMPANY" VARCHAR2(30),
"DESCRIPTION" VARCHAR2(200),
"NOTES" VARCHAR2(500),
"INDEX" VARCHAR2(30),
"INDEX_LINK" VARCHAR2(75),
"DATA_LINK" VARCHAR2(75),
"METADATA" VARCHAR2(75),
"METADATA_LINK" VARCHAR2(75),
"DISTRIBUTE" VARCHAR2(30)NOT NULL ENABLE,
"CORPORATE" VARCHAR2(1)NOT NULL ENABLE,
CONSTRAINT "DATA_INVENTORY_PK" PRIMARY KEY ("ID") ENABLE,
CONSTRAINT "DATA_INVENTORY_UK1" UNIQUE ("COE_CONTRACT_NUM", "PROJ_AREA") ENABLE
CREATE SEQUENCE "DATA_INVENTORY_SEQ" MINVALUE 1 MAXVALUE 999999999999999999999999999 INCREMENT BY 1 START WITH 324 CACHE 20 NOORDER NOCYCLE
CREATE OR REPLACE TRIGGER "BI_DATA_INVENTORY"
before insert on "DATA_INVENTORY"
for each row
begin
select "DATA_INVENTORY_SEQ".nextval into :NEW.ID from dual;
end;
ALTER TRIGGER "BI_DATA_INVENTORY" ENABLE
Does anyone see anything wrong with this?
The create table part is alright but when I add the create sequence etc it causes the error
Thanks,
KirkHello Kirk,
Your code work likes a charm. Check your privileges for creating sequences and triggers.
Greetings,
Roel
http://roelhartman.blogspot.com/
http://www.bloggingaboutoracle.org/
http://www.logica.com/ -
Lightdm power options with systemd?
I gave up LXDM because it had a lot of bugs. LightDM seems to be ok - everything works except power button - nothing option is displayed. https://aur.archlinux.org/packages/lightdm-devel/ the source of this package include "lightdm-1.5.1-systemd_login1_power.patch". Unfortunately, neither this package nor the package from Community not works power options. Do you know light Login Manager (with user switch without logout - for ex. lxdm -c USER_SWITCH, dm-tool switch-to-greeter) ? Or does anyone knows a solution about lightdm? Are here lightdm users ? I once used the XDM, but to switch users without login i have to use xdmcp (It was ugly solution).
Just switched from LXDM to LightDM also.
It seems that there is somebody trying to implement systemd-logind support for LightDM.
And the developers of LightDM welcomes the patch.
https://bugs.launchpad.net/lightdm/+bug/930488
So maybe what we need to do is just wait for some time.
Maybe you are looking for
-
When attempting to login to a GlasPac (auto glass) website, it requires an F5 Plugin to be installed. This has been working in the past using Firefox 3.x.x and now since I upgraded to Firefox 4.0.1 it says the plugin in not compatibable with Firefox
-
Fans at high rpm in 10.6; OK in 10.5
I have a 3,1 Macbook Pro, with 2 partitions--my older 10.5 partition and the Snow Leopard partition I installed 6 months ago. When I ran the 10.6.7 update, I noticed the fans running high, frequently. I installed SMC Pro to check--and waking the comp
-
Image Artifacts with Aperture, not ACR or Capture One?
I generally use Capture One, but for the first time I’m using Aperture to process a series of photos from a just-completed trip to northern Arizona/southern Utah. I’ve been very impressed with Aperture’s workflow, and would very much like to make Ape
-
[SOLVED]Wireless connection becomes deactivated 3 seconds
Good day, I am new to Arch. I installed Arch successfully and have everything working except the wifi. My WLAN device is Broadcom's BCM4312 and I have installed b43 driver from AUR. Wired eth0 connection works fine but when I connect using wireless,
-
Hi, I am using a EMAIL to initiate BPEL process. Everythings working fine, however i have some problems. 1. The mail gets deleted after being read. 2. I want a BPEL instance to be created for only specifiic emails, say containg specific subject lines