T42 WLAN problem: DecryptDat​aUsingMsCs​p: Invalid Parameter

Have problem with my T42 (2374 BW7) running under XP SP3, no other updates installed.
Wired network works fine, no problems with IP config, DHCP, connections, etc. But wireless works only sometimes. I am connected via D-Link DI-624+, wlan is configured as WPA-PSK and all other machines like PCs and mobile connect perfectly, only T42 has problem. It looks like T42 is not allowed to get IP from DHCP. Error message in AcccessConnection says that I ahve to check my DHCP settings (which are OK!), browsing via AccessConnection DEBUG LOG I see lot of entries like this:
ERROR Access Connections( magda(Prvlg).3412.2748) [7/15]11:50:31:584 CAcCryptHlpr:ecryptDataUsingMsCsp: Invalid Parameter
I tried to use simple WEP instead of WPA-PSK - no progress, still no connection in most cases. I also tried to connect directly via XP application (no with Access Connections) - the same case.
Any hints from you? What to check now?

Hi
You have to configure an AP-Group & then add your WLAN to your AP group. Since WLAN-ID is greater than 16 those will not advertise by default-ap group.
It should be something similar to this
ap group APG-1
 wlan wifitest
  vlan xx
 wlan test3
  vlan yy
 wlan open
  vlan zz
Then you need to put your AP in to that AP group from default ap-group. You can do that via CLI using below syntax.AP will reboot during this process.
3850#ap name <AP1-Name> ap-groupname APG-1
y
3850#ap name <AP2-Name>  ap-groupname APG-1
y
3850#ap name <APn-Name>  ap-groupname APG-1
y
HTH
Rasika
**** Pls rate all useful responses ****

Similar Messages

  • PL/SQL:- Invalid Parameter binding

    While calling a pl/sql function returning table type is shows error:
    Invalid parameter binding
    Parameter name: ""

    The problem is coming from .NET and most probably for NULL values.
    SQL> set serverout on
    SQL> create TYPE TEMP_TABLE AS OBJECT (
      2  COLUMN1 VARCHAR2(128),
      3  COLUMN2 VARCHAR2(32),
      4  COLUMN3 VARCHAR2(128));
      5  /
    Type created.
    SQL> create TYPE TEMP_TABLE_REC AS TABLE OF TEMP_TABLE;
      2  /
    Type created.
    SQL> create function SP_TEMP RETURN TEMP_TABLE_REC AS
      2 
      3  v_process_inputs TEMP_TABLE_REC :=TEMP_TABLE_REC();
      4 
      5  CURSOR CUR_EQUIP IS
      6  SELECT 'b' FROM dual
      7  UNION
      8  SELECT 'f' FROM dual;
      9 
    10  REC_EQUIP CUR_EQUIP%ROWTYPE;
    11 
    12  BEGIN
    13 
    14  OPEN CUR_EQUIP;
    15  LOOP
    16  FETCH CUR_EQUIP INTO REC_EQUIP;
    17  EXIT WHEN CUR_EQUIP%NOTFOUND;
    18  v_process_inputs.EXTEND;
    19 
    20  v_process_inputs(1):=TEMP_TABLE('a','b','c');
    21 
    22  END LOOP;
    23  CLOSE CUR_EQUIP;
    24 
    25  RETURN v_process_inputs;
    26  END SP_TEMP;
    27  /
    Function created.
    SQL> declare
      2     result temp_table_rec;
      3  begin
      4    -- Call the function
      5    result := sp_temp;
      6    FOR i in 1..RESULT.COUNT LOOP
      7     dbms_output.put_line(RESULT(i).COLUMN1||'--'||RESULT(i).COLUMN2||'--'||RESULT(i).COLUMN3);
      8    END LOOP;
      9  end;
    10  /
    a--b--c
    PL/SQL procedure successfully completed.Note the last null values ----.

  • Error: Invalid Parameter when trying to extend volume in Windows Server 2012

    From VMware, I added space to a Hard Drive to a Windows Server 2012 VM.  I then went into the WinServer console, and opened Disk Management.  I did a rescan on the disk.  It found the extra space.  I right mouse click on the Disk,
    and choose Extend Volume, choose the available space, and then an error returned of 'Invalid Parameter'.
    In Disk Manager, the new larger space is assigned, but Windows Explorer and everything else only recognizes the original smaller size.  
    EventManager shows Event ID 265: A pointer device did not report a valid unit of angular measurement.  Event ID 257: A pointer device reported a bad angular physical range. Event ID 258: A pointer device reported a bad angular logical range.
    Anyone have a solution for this problem?

    Hi,
    Please try to use the command line utility diskpart to extend the drive.
    1. Open a command prompt
    2. Type in diskpart
    3. Type list volume
    4. Type select volume #  
    5. Type extend [size=n] [disk=n]
    For more detailed information about diskpart, please see:
    DiskPart Command-Line Options
    http://technet.microsoft.com/en-us/library/cc766465(v=ws.10).aspx
    You could refer to the article below to troubleshoot the issue:
    Windows Server 2008 drive doesn’t expand correctly after extending in VMware VI client
    http://consultingblogs.emc.com/greggrobertson/archive/2010/05/27/windows-server-2008-drive-doesn-t-expand-correctly-after-extending-in-vmware-vi-client.aspx
    Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Best Regards,
    Mandy 
    If you have any feedback on our support, please click
    here .
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Utl_http does not give a very helpful error message: Invalid Parameter

    I'm writing PL/SQL to consume a web service on another server. In trying to execute this snippet of code, I receive this error:
    ORA-28783: Invalid parameter
    ORA-06512: at "SYS.UTL_HTTP", line 1023
    ORA-06512: at line 29
    Line 29 is the utl_http.begin_request statement shown below.
    I'm baffled as to what the error message might point to and I'm looking from any insight others may have. The message is so generic as to be useless and I can't find any examples of others receiving this particular error when executing begin_request.
    Please note that this is an SSL/HTTPS connection. If I remove the "S" and just use HTTP, I receive an appropriate message from the web server. (A tiny web page telling me I should be using the https version and not the http version.) I can also go to, for example, Google or CNN's web sites and pull back data but those are not SSL connections. It is the SSL part that isn't working.
    This isn't a SOAP error since I never get a chance to create my SOAP message and place it in the request.
    I've tried changing the POST to GET and the HTTP version to 1.0 just to see if the error message changes and it does not.
    My wallet file is in place on the database server, placed in an accessible folder by
    the DBAs. This code can see the wallet, I believe, because if I change the wallet
    path to something non-existent, I receive a different error. I imported the web site certificate for the site I'm connecting to and placed that in the wallet. I've been able to cause "certificate chain" errors with empty wallets, so I think the certificate is correct.
    I used SOAP-UI (www.soapui.org) and was quickly able to connect to the web server and begin having a "SOAP conversation", so I know the web services I'm connecting to are working. It is something in the database itself that is preventing this from executing - the wallet, a setting in the database, something like that. But what?
    =======================================================
    utl_http.set_response_error_check(enable=>true);
    utl_http.set_detailed_excp_support(enable => TRUE);
    utl_http.set_follow_redirect(5);
    utl_http.set_wallet('file:/...', '*******');
    --**** SET THE URL FOR THIS REQUEST *******
    http_req:= utl_http.begin_request(
    'https://....' --location of web services I want to use
    , 'POST'
    , utl_http.HTTP_VERSION_1_1
    =======================================================

    You seemrd to have ruled out most potential problems I could think of.
    The error message just states that there is something wrong with the parameters that you use. Only point I can currently think of is a problem with the returned value.
    How did you declare you http_req variable? Does it use the utl_http.req type?

  • [Oracle JDBC Driver]Invalid parameter binding(s).

    Hi there
    I am using the OracleCachedRowSet, and it works fine until I tries to update a resultset with a null value. When I call rs.acceptChanges(connection); it results in the following exception.
    Please help if anyone has found a workaround to this problem.
    java.sql.SQLException: [BEA][Oracle JDBC Driver]Invalid parameter binding(s).
    at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
    at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)
    at weblogic.jdbc.base.BaseParameters.getParameter(Unknown Source)
    at weblogic.jdbc.base.BasePreparedStatement.setObjectInternal(Unknown Source)
    at weblogic.jdbc.base.BasePreparedStatement.setObject(Unknown Source)
    at weblogic.jdbc.wrapper.PreparedStatement.setObject(PreparedStatement.java:268)
    at oracle.jdbc.rowset.OracleCachedRowSetWriter.updateRow(OracleCachedRowSetWriter.java:429)
    at oracle.jdbc.rowset.OracleCachedRowSetWriter.writeData(OracleCachedRowSetWriter.java:534)
    at oracle.jdbc.rowset.OracleCachedRowSet.acceptChanges(OracleCachedRowSet.java:2926)
    at eurostat.Items.updateRS(Items.java:192)
    at eurostat.DBConnectionBean.updateRS(DBConnectionBean.java:94)
    at jsp_servlet.__mainpage._jspService(MainPage.jsp:248)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
    at com.bea.wlw.netui.pageflow.PageFlowJspFilter.doFilter(PageFlowJspFilter.java:246)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6724)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

    Hi Avi
    Thanks for the suggestion, but I don't thint that is the problem. In other forums I have found people describing the same problem(both with Oracle and Sun's implementation of CachedRowSet). See this link for an example http://bugs.mysql.com/bug.php?id=9831. So I figured that those other people needed to have a solution to the problem, but I can't find it.
    /Thomas

  • ORA-07202 sltln: invalid parameter to sltln.using

    OS:Red Hat Linux 5
    DB :11.2.0.2
    i am getting this error while creating 11g DB using DBCA ORA-07202 sltln: invalid parameter to sltln.using dbca to create

    Please check this thread (response from PavanG):
    ORA-07202 while creating DB
    Even though your DB version is 11g but this thread may help solve your problem.

  • CryptImportKey returns Invalid Parameter

    Hello,
    I've been trying for a while to import a ".pfx" file into an ACOS5 smart card (I need to do it by code).
    I've managed to find a code online that does something to that effect but I've been having trouble making it work.
    While it compiles properly, the program stops at CryptImportKey returning an error code of 87: Invalid Parameter (The program stops at the "Done 6.55" step in the code below).
    Here is the source code of the program:
    #include "stdafx.h"
    using namespace std;
    int _tmain(int argc, _TCHAR* argv[])
         cout<<"Starting...\n";
         ifstream f1;
         f1.open("file.pfx",ios::binary);
         f1.seekg( 0, ios::end );
         size_t len = f1.tellg();
         char* charData = new char[len];
         f1.seekg(0, ios::beg);
         f1.read(charData, len);
         f1.close();
         cout<<"Done 1\n";
         //  convert char* to _CRYPTOAPI_BLOB
         byte* byteData = (BYTE*)charData;
         _CRYPTOAPI_BLOB pkcs12data = _CRYPTOAPI_BLOB();
         pkcs12data.cbData = static_cast<DWORD>(len);
         //buf = ctypes.create_string_buffer(datastr);
         pkcs12data.pbData = byteData;                    //ctypes.cast(buf, ctypes.POINTER(ctypes.c_byte));
         // the rest also needs some editing
         cout<<"Done 2\n";
         HCERTSTORE hCS;
         hCS = PFXImportCertStore(&pkcs12data, L"1111", CRYPT_EXPORTABLE | CRYPT_USER_KEYSET );
         if(hCS == NULL)
         return 1;
         cout<<"Done 3\n";
         PCCERT_CONTEXT pCC(NULL);
         PBYTE pData(NULL);
         DWORD sizeOfData(0);
         BOOL success;
         BOOL callerFree;
         CRYPT_KEY_PROV_INFO* pKeyProvInfo(NULL);
         HCRYPTPROV cryptoProvider(0), cardCryptoProvider(0);
         DWORD cryptAcquireCertificatePrivateKeyFlags = AT_KEYEXCHANGE;
         HCRYPTKEY cryptKeyHandle(0);
         HCRYPTKEY sessionKeyHandle(0);
         HCRYPTKEY importedKey(0);
         BYTE* pPk(NULL);
         DWORD pkSize;
         DWORD err;
         cout<<"Done 4\n";
         // log in using PIN
         /*// PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN
         char* pin;
         //char* cardPIN = "12345678";
         long pinBufferLength = 8+1;
         pin = new char[pinBufferLength];
         WideCharToMultiByte(GetACP(), 0, L"12345678", pinBufferLength-1, pin, pinBufferLength, 0, 0);
         pin[pinBufferLength-1] = 0;
         cout<<"Done 5\n";
         byte* pinData = (BYTE*)pin;
         success = CryptSetProvParam(cardCryptoProvider, PP_KEYEXCHANGE_PIN, (BYTE*)pinData, 0);
         if(!success){
              err = GetLastError();
              printf("%u\n",err);
              return 1;
         cout<<"Done 6\n";
         delete [] pin;
         */// PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN
         pCC = CertEnumCertificatesInStore(hCS, pCC);
         if(pCC == NULL)
              return 1;
         cout<<"Done 6.1\n";
         CertGetCertificateContextProperty(pCC, CERT_KEY_PROV_INFO_PROP_ID, NULL, &sizeOfData);
         pData = new BYTE[sizeOfData];
         success = CertGetCertificateContextProperty(pCC, CERT_KEY_PROV_INFO_PROP_ID, (PVOID)pData, &sizeOfData);
         if(!success) {
              err = GetLastError();
              printf("%u\n",err);
              return 1;
         cout<<"Done 6.2\n";
         pKeyProvInfo = (CRYPT_KEY_PROV_INFO*) pData;
         success = CryptAcquireCertificatePrivateKey(pCC,NULL, NULL, &cryptoProvider, &cryptAcquireCertificatePrivateKeyFlags, &callerFree);
         if(!success) {
              err = GetLastError();
              printf("%u\n",err);
              return 1;
         cout<<"Done 6.3\n";
         success = CryptGetUserKey(cryptoProvider, AT_KEYEXCHANGE, &cryptKeyHandle);
         if(!success){
              err = GetLastError();
              printf("%u\n",err);
              return 1;
         cout<<"Done 6.4\n";
         // export key
         /*success = CryptGenKey(cryptoProvider, CALG_3DES, CRYPT_EXPORTABLE, &sessionKeyHandle);
         if(!success){
              err = GetLastError();
              printf("%u\n",err);
              return 1;
         cout<<"Done 6.45\n";
         //cout<<pkSize <<endl;
         success = CryptExportKey(cryptKeyHandle, NULL, PRIVATEKEYBLOB, 0x00, NULL, &pkSize );
         if(!success){
              err = GetLastError();
              printf("%u\n",err);
              return 1;
         pPk = new BYTE[pkSize];
         cout<<pkSize <<endl;
         success = CryptExportKey(cryptKeyHandle, NULL, PRIVATEKEYBLOB, 0x00, pPk, &pkSize );
         if(!success){
              err = GetLastError();
              printf("%u\n",err);
              return 1;
         cout<<pkSize <<endl;
         cout<<"Done 6.5\n";
         if(CryptAcquireContextW(&cardCryptoProvider, L"11111111-1111-1111-1111-111111111111", L"Advanced Card Systems CSP v2.3", PROV_RSA_FULL,CRYPT_MACHINE_KEYSET))
              printf("Key container has been opened.\n");
         else{
              DWORD d = GetLastError();
              printf("%u\n",d);
              //return 1;*/
              if(CryptAcquireContextW(&cardCryptoProvider, L"11111111-1111-1111-1111-111111111111", L"Advanced Card Systems CSP v2.3", PROV_RSA_FULL,CRYPT_NEWKEYSET))
                   printf("A new key container has been created.\n");
              else{
                   DWORD d = GetLastError();
                   printf("%u\n",d);
                   return 1;
         cout<<"Done 6.55\n";
         // import key
         success = CryptImportKey(cardCryptoProvider, pPk, pkSize, 0, 0x00, &importedKey);
         //success = CryptImportKey(cardCryptoProvider, pPk, pkSize, sessionKeyHandle, 0, &importedKey);
         //success = CryptImportKey(cardCryptoProvider, pPk, pkSize, CRYPT_BLOB_VER3, CRYPT_EXPORTABLE, &importedKey);
         if(!success){
              err = GetLastError();
              printf("%u\n",err);
              return 1;
         cout<<"Done 6.6\n";
         // import certificate
         success = CryptSetKeyParam(importedKey, KP_CERTIFICATE, pCC->pbCertEncoded, 0);
         if(!success){
              err = GetLastError();
              printf("%u\n",err);
              return 1;
         cout<<"Done 7\n";
         if(pCC) {
              CertFreeCertificateContext(pCC);
         if(pData) {
              delete [] pData;
              pData = NULL;
         if(pPk) {
              memset(pPk, 0, pkSize);
              delete [] pPk;
              pPk = NULL;
         if(importedKey) {
              CryptDestroyKey(importedKey);
         if(cryptKeyHandle) {
              CryptDestroyKey(cryptKeyHandle);
         if(callerFree && cryptoProvider) {
              CryptReleaseContext(cryptoProvider, NULL);
         cout<<"end of program\n";
         return 0;
    }I'd greatly appreciate any advice concerning this problem.
    Thanks in advance.
    Regards,
    Pascal Andraos.

    umm... you are very lost. This is a Java programming forum on a sun.com website.

  • Invalid Parameter Bindings

    Hi there!
    I'm writing a Stock Take (Inventory Control) system. I need to create some temporary rows from one table into another in order to do some calculations.
    I'm trying to add rows to a STOCK_TmpQOH table. I get the values from a STOCK_TmpQOH table and then just add a few columns' values. In VB it would have been easy... Insert into using a Select... but now... in JSC one need to read the NEXT ID each time... so I cant just use the normal autonumber... anyways...
    ...basically I have rows in Table X.... I need to copy it to Table Y and add a few columns...
    HERE's the ERROR:
    Cannot add new Stock Takejava.sql.SQLException: [sunm][SQLServer JDBC Driver]Invalid parameter binding(s).
    HEREs my CODE:
    ~~~~~~~~~~
    public String cmdNext_action() {
    //        // bind trip detail fields
    //        // GET DATA
    //        java.sql.Date date = (java.sql.Date) tripDataProvider.getValue("TRIP.DEPDATE");
    //        dateCal.setValue(date);
    //        // SAVE DATA
    //        java.util.Date uDate = (java.util.Date) dateCal.getValue();
    //        if ( uDate != null ) {
    //            java.sql.Date date = new java.sql.Date( uDate.getTime() );
    //            tripDataProvider.setValue("TRIP.DEPDATE", date);
            //Convert to the correct format IN STRING!
            Date myDate = calSDate.getSelectedDate();
            Format formatter;
            formatter = new SimpleDateFormat("dd/MM/yyyy");
            String sDate = formatter.format(myDate);
            String sReturn;
            if (stock_stakeDataProvider.canAppendRow()) {
                try {
                    //Set the NEXT step...
                    int iStep = getSessionBean1().getSTakeStep().intValue();
                    iStep++;
                    Integer x = Integer.valueOf(iStep);
                    getSessionBean1().setSTakeStep(x);
                    //ADD THE NEW STAKE
                    //=================
                    RowKey rowkey = stock_stakeDataProvider.appendRow();
                    stock_stakeDataProvider.setCursorRow(rowkey);
                    stock_stakeDataProvider.setValue("STakeID", rowkey, getApplicationBean1().getNextSTakeID());
                    stock_stakeDataProvider.setValue("LocID", rowkey, getSessionBean1().getLocID());
                    stock_stakeDataProvider.setValue("SDate", rowkey, sDate);
                    stock_stakeDataProvider.setValue("Status", rowkey, new Integer(1));
                    stock_stakeDataProvider.setValue("Step", rowkey, getSessionBean1().getSTakeStep());
                    //Set the NEXT STakeID in memory
                    //  must happen BEFORE update - else its TOO large
                    getSessionBean1().setSTakeID((Integer) getApplicationBean1().getNextSTakeID());
                    stock_stakeDataProvider.commitChanges();
                    //ADD TMP QOH for STAKE
                    //=====================
                    //Default value for new QOH = 0
                    Double dQOH = new Double(0.00);
                    //Double dQOHold;
                    if (stock_qohDataProvider.getRowCount() > 0) {
                        stock_qohDataProvider.cursorFirst();
                        do {
    //                        System.out.println(">> " + stock_qohDataProvider.getValue("StockID"));
                            //For each Stock in QOH for this Location
                            //  add a TMP QOH record
                            if (stock_tmpqohDataProvider.canAppendRow()) {
                                try {
                                    RowKey rowkey2 = stock_tmpqohDataProvider.appendRow();
                                    stock_tmpqohDataProvider.setCursorRow(rowkey2);
                                    stock_tmpqohDataProvider.setValue("TempID", rowkey2, getApplicationBean1().getNextTempID());
                                    stock_tmpqohDataProvider.setValue("STakeID", rowkey2, getSessionBean1().getSTakeID());
                                    stock_tmpqohDataProvider.setValue("StockID", rowkey2, stock_qohDataProvider.getValue("StockID"));
                                    //Double dQOHold = Double.valueOf(rs.getString("QOH"));
                                    stock_tmpqohDataProvider.setValue("QOH_Old", rowkey2, (Double) stock_qohDataProvider.getValue("QOH"));
                                    stock_tmpqohDataProvider.setValue("QOH", rowkey2, dQOH);
                                    stock_tmpqohDataProvider.setValue("SDate", rowkey2, sDate);
                                    stock_tmpqohDataProvider.commitChanges();
                                } catch (Exception ex) {
                                    log("Cannot add Temp Stock Take", ex);
                                    error("Cannot add Temp Stock Take" + ex.getMessage());
                                    sReturn = "stake1";
                        } while (stock_qohDataProvider.cursorNext());
                    info("New Stock Take added");
                    sReturn = "stake2";
                } catch (Exception ex) {
                    log("Cannot add new Stock Take", ex);
                    error("Cannot add new Stock Take" + ex.getMessage());
                    sReturn = "qoh";
            } else {
                log("Cannot add New Stock Take");
                error("Cannot add New Stock Take");
                sReturn = "qoh";
            return sReturn; //sReturn
        }Thanks SO much for the help!

    Hi,
    there is an Oracle style using ":varname" but this wont work with Server. When you created the ADF BC project, did you make sure that the project uses SQL92 as its flavor and not Oracle ?
    Frank

  • Invalid parameter value Error while Extending PoReqDistributionsVO

    Hi,
    My Requirement is to restrict user from enetring certain values in a field in iProcurement Page based on some condition. The attribute on which I have to place the validation is CodeCombinationId and the VO name is PoReqDistributionsVO. So, I extended the VO and generated the VORowImpl class for the extended VO. Please note that I have extended the VO just to override the setter method for the CodeCombinationId in the VORowImpl. I did not change any other thing on the VO. Once I deploy the code, I am getting the following error for the first time:
    ## Detail 0 ##
    oracle.jbo.InvalidParamException: JBO-25006: Invalid parameter value PoReqDistributionsVO for source passed to method ViewLinkImpl.setSource. Explanation: view def mismatch
    And then if I try to open the page again, it gives me multiple distribution lines. (Say for example I have only one distribution line for the requistion line and my distribution table PO_REQ_DISTRIBUTIONS_ALL has total 20 records, then all the 20 records are getting displayed in the front end.)
    So, clearly after I extended the VO, the viewlink is not able to identify the viewlink.
    I went through the following thread:
    oracle.jbo.InvalidParamException: JBO-25006: Invalid parameter value
    As suggested in the therad, I thought of copying all the view link related methods from the original VO files. But, I could not get any Viewlink related information in any of the three seeded files PoReqDistributionsVO.xml, PoReqDistributionsVOImpl.class and PoReqDistributionsVORowImpl.class. But I can find one View Link oracle.apps.icx.por.req.server.ReqLineToDistributionsVL in teh server which is linking PoRequisitionLinesVO to PoReqDistributionsVO.
    Could anyone suggest me what I need to do to resolve the issue.
    Edited by: 892480 on Oct 20, 2011 8:13 AM

    Hi Gurus,
    Any suggestion on the above issue?

  • WiFi (WLAN) problem - in the same room a iOS 5 device connects, iOS 6 not

    Hi all,
    I won't say that it's a proof for the iOS 6 WiFi/WLAN problem. BUT, it's evident that my iPhone 4 with iOS 5 sees all WLAN-networks and connects - my new iPad with iOS 6 doesn't! And I'm using the two devices in the same room. In addition my new iPad didn't have connection problems before updating to iOS 6.
    Apple Software Engineers - please help and release the next update to fix it
    Best regards
    O.

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Invalid parameter SECONDARY_RECORD-PSKEY Error in Personal Data Screen

    Hi All,
    We are using EHP6. The Personal Data  iview is throwing an error while trying Edit something.
    I am able to add a new register  but getting the following dump while trying to Edit/Save
    This apply for all the employees.
    This apply for all the employees.
    I looked through SAP Note-1815863 - Dump in Class CL_HRPA_INFOTYPE_CONTAINER Method. However all the tables mentioned in that Note seemed to be configured properly.
    Any help will be appreciated.
    Short Dump
    Error while processing your query
    What has happened?
    The URL call sap/bc/webdynpro/sap/HRESS_A_PERSINFO was terminated because of an error.
    Note
    The following error occurred in system DEV : Invalid parameter SECONDARY_RECORD-PSKEY , value 1008119301067 9999123120130621000
    The error occurred on application server HRE_05 and in work process. 8
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: IF_HRPA_INFTY_CONTAINER_DATA~MODIFY_SECONDARY_RECORD of program CL_HRPA_INFOTYPE_CONTAINER====CP
    I have checked:
    Report RPUPAV00.
    Subtype config, inconsistent data.
    I updated table V_T582V & V_T582W.
    I maintained tcode-GENIL_MODEL_BROWSER.
    I also have checked the following:
    sap > bc> webdynpro > HRESS_A_PERSINFO   ----check this once activate or not ...right click and check is it activated or not
    I also have run the report RPUFIXDS for that personal number, , however the issue follow.
    The error not occur when I delete the register for the the following  V_T582V & V_T582W, however the fields for the infotype secondary not appear in the dynpro of the infotype 0002.
    Thanks
    Regards

    There could be several possible causes
    Usually this error occurs if a secondary infotype functionality has been delivered via SP or SNOTE for infotype 0002 but the PERNR you are using does not have secondary infotype record
    Tables V_T582V & V_T582W determine if a secondary infotype will be used - if you remove entries here this will deactivate the secondary infotype useage - this might be one way to resolve the issue - but perhaps you wish to use the secondary infotype - in some cases it might be required- for example ESS might expects a secondary infotype and throw an error if there is an issue
    If you wish to use the secondary infotype you need the delivered entries in V_T582V & V_T582W and you need to run RPUPAV00 for any PERNR that has a 0002 record existing prior to the new secondary infotype being introduced to ensure they have a secondary infotype record key that matches the primary infotype key

  • VO Substitution : JBO-25006 : Invalid parameter value passed for source

    Hello All,
    I want to add 2 new fields (attribute columns) to an existing VO for which I am trying to use VO substitution. I have followed these steps.
    1.     Downloaded all the class files from server to local machine
    2.     Opened an OA project and extended the VO by changing sql query to add 2 attribute columns
    3.     Added 2 transient VO attributes to map them to the added fields in sql query
    4.     Create a BC4J substitution and imported jpx file using jpximporter
    While opening the page which consisted the original VO that I extended (creditRequestsVO), I am getting below error. Appreciate if anyone can throw any light on this.
    Exception Details.
    oracle.apps.fnd.framework.OAException: oracle.jbo.InvalidParamException: JBO-25006: Invalid parameter value creditRequestsVO for source passed to method ViewLinkImpl.setSource. Explanation: view def mismatch
    at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1247)
    at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1435)
    at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2542)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1892)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:536)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:424)
    at OA.jspService(_OA.java:212)
    at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
    at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
    at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
    at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
    at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
    at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
    at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:619)
    ## Detail 0 ##
    oracle.apps.fnd.framework.OAException: oracle.jbo.InvalidParamException: JBO-25006: Invalid parameter value creditRequestsVO for source passed to method ViewLinkImpl.setSource. Explanation: view def mismatch
    at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:896)
    at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1169)
    at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1435)
    at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2542)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1892)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:536)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:424)
    at OA.jspService(_OA.java:212)
    at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
    at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
    at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
    at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
    at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
    at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
    at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:619)
    oracle.apps.fnd.framework.OAException: oracle.jbo.InvalidParamException: JBO-25006: Invalid parameter value creditRequestsVO for source passed to method ViewLinkImpl.setSource. Explanation: view def mismatch
    at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:896)
    at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1169)
    at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1435)
    at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2542)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1892)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:536)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:424)
    at OA.jspService(_OA.java:212)
    at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
    at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
    at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
    at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
    at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
    at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
    at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:619)
    Edited by: Bhavesh J Shah on Feb 22, 2010 1:58 AM

    Hi Rama,
    Parameter being passted to LeadHeaderDetailsVO is not right. Check the parameter values that are being passed,wether there are right or not
    Thanks
    Sandeep

  • Call to Java Method to Zip directory fails with error Invalid parameter 1

    Hi all,
    I try to translate the following Java Code to PeopleCode and I do not succeed in it.
    Can somebody please help me out ?
    On that website http://www3.ntu.edu.sg/home/ehchua/programming/java/J5b_IO.html I extracted the Java Code:
    import java.io.File;
    public class ListDirectoryRecusive {
    public static void main(String[] args) {
    File dir = new File("d:\\myproject\\test"); // Escape sequence needed for '\'
    listRecursive(dir);
    public static void listRecursive(File dir) {
    if (dir.isDirectory()) {
    File[] items = dir.listFiles();
    for (File item : items) {
    System.out.println(item.getAbsoluteFile());
    if (item.isDirectory()) listRecursive(item); // Recursive call
    PeopleCode
    I want to get all the files included in the directory
    Local string &SourceDirPath = S1_FS_RDCFG_AET.S1_CHMN_TODO;
    Local JavaObject &Javadir = CreateJavaObject("java.io.File", &SourceDirPath);
    Local array of any &StrArray;
    &ArrayOfAny = CreateArrayAny();
    Local JavaObject &JavaFilesArray = CreateJavaArray("java.lang.Object[]", 1024);
    &JavaFilesArray = &Javadir.listFiles();
    CopyFromJavaArray(&JavaFilesArray, &ArrayOfAny);
    ==> I alway get the error
    Message:
    Invalid parameter 1 for function CopyFromJavaArray. (2,116) S1_DSITE_ZIP.MAIN.GBL.default.1900-01-01 .DIRECTOR.OnExecute PCPC:511 Statement:9
    I thank you in avance
    Edited by: Meapri on Jan 23, 2013 9:33 AM

    The Pcode I wrote to Zip Directories
    Function AddFileToZip(&sDirSeparator, &zipInternalPath, &fileNameToZip, &zipFileName, &outFileStream, &zipStreamOut)
       Local JavaObject &file = CreateJavaObject("java.io.File", &fileNameToZip);
       Local JavaObject &inFileStream = CreateJavaObject("java.io.FileInputStream", &fileNameToZip);
       Local JavaObject &zipEntry = CreateJavaObject("java.util.zip.ZipEntry", &fileNameToZip);
       REM **  Créer le flux de sortie de données pour le fichier ZIP final;
       REM ** We will read &fileNameToZip into a buffer and write it out to &zip;
       Local string &ZippedfileName = &zipInternalPath | &sDirSeparator | &zipFileName;
       REM ** Make sure zip entry retains original modified date;
       &zipEntry.setTime(&file.lastModified());
       &zipStreamOut.putNextEntry(&zipEntry);
       Local JavaObject &buf = CreateJavaArray("byte[]", 1024);
       Local number &byteCount;
       &byteCount = &inFileStream.read(&buf);
       While &byteCount > 0
          &zipStreamOut.write(&buf, 0, &byteCount);
          &byteCount = &inFileStream.read(&buf);
       End-While;
       &inFileStream.close();
       MessageBox(0, "", 99000, 0, "Zipped File : " | &fileNameToZip);
    End-Function;
    Function getDirContent(&sDirSeparator, &parentFolder, &zipFileName, &outFileStream, &zipStreamOut)
       MessageBox(0, "", 99000, 0, "Directory to scan : " | &parentFolder);
       Local JavaObject &Folder = CreateJavaObject("java.io.File", &parentFolder);
       Local JavaObject &jItems = &Folder.list();
       /* Transformation en Array Pcode*/
       Local array of any &items = CreateArrayAny();
       Local number &idx = 1;
       &items [&jItems.length] = Null;
       CopyFromJavaArray(&jItems, &items);
       For &idx = 1 To &jItems.length
          Local string &Entry = &parentFolder | &sDirSeparator | &items [&idx];
          Local JavaObject &FileOrFolder = CreateJavaObject("java.io.File", &Entry);
          If &FileOrFolder.isDirectory() Then
             getDirContent(&sDirSeparator, &Entry, &zipFileName, &outFileStream, &zipStreamOut);
          Else
             AddFileToZip(&sDirSeparator, &parentFolder, &Entry, &zipFileName, &outFileStream, &zipStreamOut);
          End-If;
       End-For;
    End-Function;
    Local string &RootName = "C:\TEMP\TEST";
    Local string &sDirSeparator = "\";
    REM ** Create Output Zip File ;
    Local string &ZipFileName = &RootName | &sDirSeparator | "Temp2_Zip.zip";
    Local JavaObject &OutFileStream = CreateJavaObject("java.io.FileOutputStream", &ZipFileName, True);
    Local JavaObject &zipStreamOut = CreateJavaObject("java.util.zip.ZipOutputStream", &OutFileStream);
    REM ** Create Zip File Entries found in the directory;
    getDirContent(&sDirSeparator, &RootName, &ZipFileName, &OutFileStream, &zipStreamOut);
    REM Close Output Zip File ;
    &zipStreamOut.close();Edited by: Meapri on Feb 2, 2013 10:54 AM : copy and paste code that works!
    Edited by: Meapri on Feb 2, 2013 10:56 AM
    Edited by: Meapri on Feb 2, 2013 11:02 AM

  • ORA-07202 sltln: invalid parameter to sltln.using dbca to create 11g

    OS:Red Hat Linux 5
    DB :11.2.0.2
    i am getting this error while creating 11g DB using DBCA ORA-07202 sltln: invalid parameter to sltln.using dbca to create

    user13549752 wrote:
    OS:Red Hat Linux 5
    DB :11.2.0.2
    i am getting this error while creating 11g DB using DBCA ORA-07202 sltln: invalid parameter to sltln.using dbca to create
    07202, 00000, "sltln: invalid parameter to sltln."
    // *Cause:  The sltln name translation routine was called with invalid
    //          arguments. The input, or output stings were either NULL or 0 length.
    // *Action: Probable internal oracle error. Contact customer support.I suspect you failed to Read The Fine Manual, Installation Guide

  • 用虚拟立方体显示数据源数据报错001 Error in BW & 001 Invalid parameter.

    事情是这样的：
    1. 我用RSO2建立一个数据源,table选的是"SFLIGHT"
    2. 提取页面我也选了u201C同步提取SAPI（用于虚拟块和测试）u201D
    3. 建立虚拟立方体，然后转换，然后仅激活DTP。
    但是我选u201C显示数据u201D时，就报这样的错：
    001 Error in BW.
    001 Invalid parameter.
    我确定数据源没问题，因为可以读取预览数据。我在cmod里写过ABAP代码，不过后来删了。
    求解
    Edited by: peteron on Sep 1, 2010 8:16 AM

    Hi Lei
    谢谢您的热心回答....因为两条回复内容是重复的，所以我把另外一条删除了.
    btw, Bill说的RSDS类型，意思就是7.x的datasource..
    祝好
    Vince
    Edited by: Vince Lu on Sep 5, 2010 11:54 AM

Maybe you are looking for