T420 - Installed updates - problems with OSD and UltraNav

Hello,
I have just reveived my T420 and installed all updates - first MS Winows 7, then Lenovo. The effect is that...
OSD is not working (I did not find any setting that would turn it on/off)
Ultranav middle button works like any mouse middle button - previously I used it for scroling, now it is just a normal mouse button
I cannot use mouse settings in windows. When I try to enter them, windows asks me to unsintall Synaptic driver for some reason. Then mouse setting window appears, but it is frozen.
Anybody had simillar problems?

The OSD-problem appears very often the last days after running System Update.
Install the hotkey-features manually
If Ultranav still does problems then remove it from Control panel - Programs and functions and install it again manually.
Driver: http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-66898
Utility: http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-67226
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

Similar Messages

IOS 7.1 Update problems with text and imessage

SInce I did the latest updates I've had problems with my text and iMessage. First I've never used iMessage in the past and always got my text messages and sent text just fine. Now it seems at though I can only have one or the other. If I have friends using iMessage and I have my iMesage turned off they wont get my message and if I have my iMessage turned on and I send to someone with and android they wont get my message either. It's like it can't figure out if it's and iMessage or a normal text. I have it set to send as SMS when iMessage is unavailbe but it doesnt sent as a text message.
So at this point I wont be ablet to get my messages from both iMessges and SMS..
Anyone else have this problems.

Hello crissyanon,
The following article provides some useful information and troubleshooting steps that can help get Messages working.
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Cheers,
Allen

Software Update Problems with Internet and links xperia L

Since the last Update my xperia L has Problems
Google chrome can not be opend via Icon
Google search is possible but if you want to Open any link it cannot be opend (no New window)
Internet is only available via wifi but not with the smart phone supplier (tmobile) - resulting in no access to Internet

Strange! Try to remove the battery from the phone for a while and then try again. You can also start your phone in safe mode to see if the problem may be related to any 3rd party apps installed in your phone:
http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008
Do you experience the same problem if you download another browser from Google Play?
What are your thoughts about this forum? Let us know by doing this short survey.

10.5.5 update problems with firewall and permissions

Hello, I have a small office (4 people) with one server that has both leopard server (standard install) and filemaker server installed on it. I'm hosting our website, running ical services, file sharing and Firewall. I avoided doing any updates because everything was working well and I didn't want it to get screwed up. Well our website was hacked into so I went ahead and ran the combined update and restarted. Everything booted up fine and is working with the exception of Filemaker Server database access and webdav access to our site folder.
The Filemaker access is a firewall issue but I'm not sure about how to proceed. In order to open the appropriate port it seems I need to use server admin (instead of server prefs) and run the firewall from there. If I allow the Filemaker server service for "Any" doesn't that leave me vulnerable from the outside? if so how would I go about allowing it only to the internal file services?
For the webdav services when using Dreamweaver to upload files to our server I receive a permissions error not allowing me to upload any files. I have repaired permissions and still get the same error. My question is 2 part:
Any ideas on what to do about the permissions?
Would it be more secure to turn off webdav and create a share point ( I am local ) for the site folder with "others" read only privileges and my web designer read and write privileges?
If I continue to use webdav should I secure the folder using realms and give "Everyone" browse only privileges and my web designer Browse and Read/wright privileges?
Thanks in advance
Steve

you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
btw - no solution yet.

IOS5 update problems with iphone and ipad

I first tried to update my iphone 4, with zero success. All software updated on my macbook pro, then when i began to update the iphone, i got stuck on "contacting iphone activation server". I can still manage my iphone and eject it, but no update. This was yesterday and 24 hours later whenver i turn on my ituens, it still says "contacting iphone activation server". iTunes is mostly functional still, but it won't connect to the iTunes store. Next I tried my iPad (1) which successfully updated, but even though I synced from a backup to iTunes, none of my apps or data is on the iPad other than my email. Now when I plug in my iPad I cannot manually manage it. The screen in iTunes when I click my iPad is just a grey screen that says iPad. No info, or buttons to choose manual or automatic update. And the iTunes bar at the top still says "accessing iTunes store", "contacting iphone activation server" and also "genius accessing iTunes store". I get that I'm obviously not connnecting to sites, but why is my ipad not responding in iTunes? I dont think that being connected to iTunes is that important to managing your iPad since I've done it several times with no internet connection.
Please help! I really dont want to have to email myself all of my documents that I want on my iPad, or try to sync them over my webdav.
Cheers

I found a bit of a work around that is working for me, strange but it works.
Adding the photo album sub folders 1 at a time and syncing. Then when it completes, add another one, confirm the pics are there and continue process. I now have over 35k photos and no gaps or empty albums but if I do more than 2 or 3 they show up empty.
If empty, unsync them, and add 1 at a time.

Update problems with catalyst and xorg-server

/etc/pacman.conf
[catalyst]
Server = http://catalyst.apocalypsus.net/repo/catalyst/$arch
$ pacman -Syu
:: catalyst-utils: benötigt xorg-server<1.12.0
$ pacman -Si xorg-server
Repositorium : extra
Name : xorg-server
Version : 1.12.0-1
Mmmmh ...
Ranomier

pacman.conf
#[...] standart stuff
#yaourt repos
[archlinuxfr]
Server = http://repo.archlinux.fr/x86_64
#catalyst repos
[catalyst]
Server = http://catalyst.apocalypsus.net/repo/catalyst/$arch
#EOF
Updating
$ pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
multilib is up to date
archlinuxfr is up to date
catalyst is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: catalyst-utils: requires xorg-server<1.12.0
Information about the required package
# LC_ALL=C pacman -Si xorg-server
Repository : extra
Name : xorg-server
Version : 1.12.0-1
URL : http://xorg.freedesktop.org
Licenses : custom
Groups : xorg
Provides : x-server
Depends On : libxdmcp libxfont udev libpciaccess libdrm pixman libgcrypt libxau
xorg-server-common xf86-input-evdev
Optional Deps : None
Conflicts With : nvidia-utils<=290.10
Replaces : None
Download Size : 1273.11 KiB
Installed Size : 3818.00 KiB
Packager : Andreas Radke <[email protected]>
Architecture : x86_64
Build Date : Mon Mar 5 07:00:50 2012
MD5 Sum : 499b6f00f70cab6f75d0cea349b69fd6
SHA256 Sum : 0d9a4a50770912e8d90b21ffe9dbb0d83d58e60598088d55881000fccf1e87e2
Signatures : Yes
Description : Xorg X server
But in the repos IS the 1.12.x package of xorg-server
wondering, ok then i take these repos
Last edited by Ranomier (2012-03-13 18:42:18)

10.4.6 update problems with isync and idisk, and shutting down.

I downloaded the 10.4.6 update and my Idisk no longer mounts automatically after logging in. I can make it mount if I do a search for it, and then double click on the icon. Once it does mount, it will not sync when I add new files to it.
I have repaired permissions a couple of times, but it still doesn't work. I also can't shut down until I see an error message about "mirror agent". What should I do?

This is the iPod nano forum.
Don't you need to post this in the Tiger Forum?

TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly.

'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?

Try Troubleshooting issues with iTunes for Windows updates.
tt2

Problem with Rescue and Recovery after installing Norton Internet Security 2010

Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71

Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers

Strange Problems With Display and Permissions Since 10.5.1 update.

Since I've done the 10.5.1 update I have been having a strange problem with my desktop and dock displays. On my desktop I have these strange lines that appear any time I log in or open any application, the lines never go away and change locations on the screen once I open an application or move a window. My dock has the reflective shelf for about half of it, the rest is a dull grey. I've also had problems with verifying and repairing my permissions. I can never actually complete either permissions task. I've used some third party apps, they always fail as well. The only time I can actually repair my permissions is by booting in to single user mode and doing a fsck -f command. When I boot back in to Leopard and try to use the Disk Utility to repair, it continues to fail.
I'm not sure if the video problem I am having stems from a permissions issue or possibly a corrupt video driver. Either way, I've done a lot research and haven't found anyone with the same problems I have been having so I thought I would give these forums a shot.
I am using a PowerMac G4 Quicksilver with dual 800Mhz, 1.5gb RAM, and a GeForce4 Ti 4600 128mb video card.
Here is a screen shot of the line and dock problem.
Here is a screen shot of my "About This Mac.
If anyone could lend some light on this issue, I would greatly appreciate it.
Thanks
Jeff

you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
btw - no solution yet.

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...

I have the MacIntosh volume and the Boot Camp partition only. I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive.
The tech at the Apple Store had a previous life as a MSCE and was very helpful. I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard. I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick.
I do not have another installation, so that is not an option. I will try to create an external, I have plenty of hard drives around and see if I can get it done that way. It might take me a week or two to get back to it, but I will comment back upon completion of that effort. Thanks for your help....Dave Iverson

I'm having problems with 7.1 update my flash "flashes" now when I receive txt's and notifications! And I'm also having problems with freezing and wifi problems! How do I solve this?

I'm having problems with 7.1 update my flash "flashes" now when I receive txt's and notifications! And I'm also having problems with freezing and wifi problems! How do I solve this?

Doh! Rectified flash!
But when face timing 2 seconds after it connects wifi disconnects? Any thoughts

I have a iphone 5, purchased dec 2013. Had no problems with downloads and syncing until yesterday. I updated to the latest 7.1.1 and now my purchased ringtones have bern deleted from ....Try providing more room for peoples questions ...

I have a iphone 5, purchased dec 2013. Had no problems with downloads and syncing until yesterday. I updated to the latest 7.1.1 and now my purchased ringtones have bern deleted from my library and my phone, Where are they ????
I have gone to download again and told i can purchase them again
But there is no option to download all ready purchased items..
Can you provide an explanation and solution .

Are you using the same Apple id as used to originally purchase them
and are you using iTunes on a PC/Mac

Problem with DMGs and error: "No Mountable File Systems"

Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaia

Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

Problem with vista and 5.1

problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
In my new pc.
i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
why is that?
i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
do i miss something?
is the test worg and with another test i can get all spedajer to work or the driver is not good?
thanks for all you help
last update...
i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
but in movie mode i get only 2 front speaker.
i use the digital out from the sound blaster.
Message Edited by raflevi on 05-4-2009 02:38 [email protected]

My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
. Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
3. In the Audio Console, select the Encoder tab and enable DLL encoding.
Note:
When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
raflevi wrote:
when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
thanks again for all your help.
i wanted to use the 5. function mostly for games
Yes... also please see the link in my previous post.
Hope this answers your questions.

T420 - Installed updates - problems with OSD and UltraNav

Similar Messages

Maybe you are looking for