T420s Linux (Fedora) Video -- Getting Started

I installed Fedora 15 on my new T420s and it works fine so far except that I can only get a resolution of 1024x768 on the built-in LCD, instead of the 1600x900 which the screen supports. It works fine in Windows 7 at 1600x900. I have not tried an external monitor.
I have been trying various things (Nvidia drivers, bumblebee, different BIOS settings) but so far they either did not work or had the same resolution limitation. Before I go into great detail, I thought I should check if anyone has Linux running at all on a T420s at 1600x900. If so, can you post your xorg.conf file and BIOS settings? That way I would have a working base configuration to work from. At this point I don't care if it uses the Intel or Nvidia graphics -- I just want the higher resolution to get started.
BTW, when Fedora installed, it set up xorg.conf to use the vesa driver. The resolution applet lists choices of 1024x768, 960x600, and 800x600. I tried adding modes in xorg.conf, but that had no effect.
Thanks in advance.

Well, I already have the system installed, so I would like to just change the settings.
I checked, and the Intel drivers are already installed. So I changed the BIOS to Integrated Graphics and changed my xorg.conf to say 'Driver "intel" ' instead of ' Driver "vesa" '. When I try to start X I get these messages:
(EE) No devices detected.
Fatal server error:
no screens found
I also tried removing my xorg.conf and running "Xorg -configure". That tried to load all the drivers (mach64, vesa, etc.), then aborted when it loaded the nvidia driver and there was no nvidia hardware. So I deleted the nvidia driver files and now it complains that it cannot find the nvidia driver. I have not been able to figure out how Xorg knows what drivers (kernel modules) to load when I ask for -configure so I can tell it not to load the nvidia driver.
You know, I have been using Linux since version 0.9 around 1990 and Unix since Seventh Edition() and I still cannot keep track of how the different configuration files keep changing.
Thanks in advance for any insights or suggestions.

Similar Messages

The video Getting Started With Firefox won't play on my new MacBook Pro; how to make it play?

I went from Firefox Bookmarks to the introduction to Firefox, I could read the information but could not play the video

Once you get the domain file from your old Mac onto your new Mac asx AnsonS describen read this:
In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
You can download an already compiled version with this link: iWeb Switch Domain.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Getting started with ePrint (Videos)

Here are a few videos on getting started with ePrint. These videos are specific to specific model(s).
Getting Started with ePrint - HP LaserJet P1606dn
Getting Started with ePrint - HP Laserjet CP1525
The printer shown in this video is the HP Laserjet CP1525.
Getting Started with ePrint - HP Laserjet 1536dnf MFP
The printer shown in this video is the HP Laserjet 1536dnf.
Getting Started with ePrint - HP Laserjet P1102w
The printer shown in this video is the HP Laserjet P1102w.
Getting Started with ePrint - HP Photosmart Plus e-All-in-One Printer - B210a
The printer shown is the HP Photosmart Plus e-All-in-One - B210a, but these steps will also work for the B210b and B210c.
Getting Started with ePrint - HP Officejet 6500a-7500a-8500a (a910a)
These steps work for the HP Officejet 6500A e-All-in-One -- E710s, E710e, E710n, E710a; HP Officejet 7500A Wide Format e-All-in-One Printer - E910c, E910a; HP Officejet Pro 8500A e-All-in-One Printer - A910a, A910d.
Getting Started with ePrint - HP Photosmart Premium e-All-in-One Printer - C310a
The printer shown is the HP Photosmart Premium e-All-in-One Printer - C310a, but the steps will also work for the HP Photosmart Premium e-All-in-One Printer - C310b, and the HP Photosmart Premium e-All-in-One Printer-C310c.
Getting Started with ePrint - HP Color Laserjet CP1025nw
The printer shown is the HP Color LaseJet CP1025nw.
Getting Started with ePrint - HP Photosmart eStation All-in-One Printer - C510a
These steps will work for the HP Photosmart eStation All-in-One Printer - C510a.
Getting Started with ePrint - HP Officejet Pro All-in-One 8500a A910n
These steps will work for the HP Officejet Pro 8500a (a910g, a910n) All-in-One printers.
Getting Started with HP ePrint - HP Photosmart e-All-in-One Printer (D110a)
The printer shown is the HP Photosmart D110a, but the steps will also work for the HP Photosmart B110a and K110a.
9/20/2012 update: 4 new videos
Getting Started with ePrint - HP Envy 100 e-All-in-One Printer (D410a)
The model shown is HP Envy 100 e-All-in-One Printer (D410a).
The steps shown apply to these printers:
HP Envy 100 e-All-in-One Printer (D410a)
HP Envy 100 e-All-in-One Printer (D410b)
HP Envy 100 e-All-in-One Printer (D411a)
Getting Started with ePrint - HP Deskjet 3050A e-All-in-One Printer (J611a)
This video shows the HP Deskjet 3050A e-All-in-One Printer (J611a), and also applies to the J611b.
Getting Started with ePrint - HP Photosmart 5510 e-All-in-One Printer (B111a)
This video shows the HP Photosmart 5510 e-All-in-One Printer (B111a), but these steps also apply to the B111b, B111g, 5511 B111j, 5512 B111a, 5512 B111e, 5512 B111f, 5514 B111c, 5514 B111d, 5514 B111h, 5515 B111a, 5515 B111h, 5515 B111j, 6510 B211a, 6510 B211b, 6510 B211e, 6512 B211a, 6515 B211a.
Getting Started with ePrint - HP Envy 110 e-All-in-One Printer (D411a)
The printer shown in this video is the HP Envy 110 e-All-in-One Printer (D411a), but the steps also apply to the Envy 110 (D411b), Envy 111 (D411d), and the Envy 114 (D411c).
I am an HP employee.

Great topic!!
I am an HP employee

The theme/background (AWESOME futuristic space scene) shown in the last part of "Getting Started video available for download?

In the last part of the video "Getting Started" right after I downloaded Firefox 4, there was a background scene of an awesome page that showed some futuristic space scene that has the mozilla theme (fox) in the picture. I would like to know if it is available for download and/or it's name. I searched through the themes, but they don't show enough of the theme to actually see what the background would be once downloaded. Thank you in advance for any help you can offer.
Gina Taylor

Maybe you like this video as well:
* http://vocamus.net/dave/?p=1233 Flight of the Navigator
* http://videos.mozilla.org/serv/mozhacks/flight-of-the-navigator/
* http://blog.vlad1.com/2010/12/21/webgl-in-firefox-4-beta-8/

Starting Oracle-Xe on Linux fedora core 5

Dear fourm members,
I had Installed Oracle Xe on linux fedora core 5 and configure it.
When i try to start the oracle Xe server I get the follwing error.
# /etc/init.d/oracle-xe start
Starting Oracle Net Listener.
Starting Oracle Database 10g Express Edition Instance.
Failed to start Oracle Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus.
what can i do to start the service.

Failed To Start Oracle Net Listener

I do not have the Firefox button the Getting started video refers to many times, I can't find a setting for it, how do I get it?

The Firefox button referred to many times in the Getting started video for Firefox 4 (for Mac) does not appear on my window. I can't find a setting for it, how do I get it?

The Firefox button is only on Linux and Windows. The Mac handles menus differently. In the Mac the menu bar is controlled by the operating system and is always present. In Windows and Linux, the Firefox button replaces the menu bar which is not possible on the Mac.

Getting started porting Linux driver

Hello,
If this question has been posted somewhere else please point me in the right direction.
I'm new to solaris and my goal is to port a Linux driver (vmebus pci device on Redhat) to Solaris (X86 v5.11). The Linux driver is all written in straight C. I've installed Solaris Express Dev Edition 2/07. I see that gcc is there (under /usr/sfw/bin) but it seems like a bare-bones development environment (no enviroment variables set up , etc).
My question is is this the right set of development tools to proceed forward with or should I be downloading something else ? Is there some easier to use graphical 'IDE like' set of tools that is more appropriate for a Solaris newbie like me ? I know Forte is a commercial product, what is the best freeware for graphical C development ?
Regards,
Brent
Message was edited by:
bbartson

Here's what I would do... go to this website and download an ISO of a live CD. You can burn it, stick it in your CD drive, and start your PC. It will boot to Linux without ever having to format anything, that way you can tinker around with how it feels. After you are happy with that, you can download and install a distro...
http://www.kubuntu.org/special-cds.php
As far as disrtos go, I would choose one of the following for a first time user:
Kubuntu (because it's easy to get started) http://www.kubuntu.org/ or
Fedora Core 5 (because it's easy to download and add packages -- most in the Add/Remove Programs app) http://fedora.redhat.com/
Both of these distributions have a lot of help and howtos when it comes to Oracle as well. If you don't like KDE (I do but that's personal preference) then FC5 gives you the option of Gnome or KDE and Ubuntu is the non-KDE version of Kubuntu.
~Jer

Oracle on Linux (getting started)

Hello, i've just installed Oracle EX on linux (Fedora Core 5) and I did some initial configurations:
http port: 8080
listener port: 1521
and password for database accounts.
I had my system rebooted and now i can't connect to http://127.0.0.1:8080/apex.
This is my first posting and I'm a very beginner at this (never used a DBMS).
I appreciate anyone's help!

hey guys,
my oracle_env. sh didn't run in the first place, but i've already fixed that.
Now my lsnrctl status is this:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 27-JAN-2007 09:39:17
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 27-JAN-2007 09:13:55
Uptime 0 days 0 hr. 25 min. 21 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/ne twork/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/ne twork/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XE" has 1 instance(s).
Instance "XE", status BLOCKED, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "XE", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
and i can connect to the server using sqlplus / as sysdba, but i still can't get to 127.0.0.1:8080/apex. what should i do?
thanks!

I'm planning on making my own Podcast channel for my world of warcraft videos, how to I get started?

I'm planning on making my own Podcast channel for my world of warcraft videos, how to I get started? I'm using my MacBook, Mac OS X (10.6) for my video editing and using my HP Pavilion, Windows 7, g6t-2000 Notebook PC 64-bit for my video recording.

You may find my 'get you started' page on podcasting helpful.
http://rfwilmut.net/pc
It's written with audio podcasts in mind but will explain the general principles for you - ths concept of a 'feed' is the same for audio and video.
You should also check this Apple Tech note for information about formatting video
http://www.apple.com/itunes/podcasts/specs.html#formattingvideo

Embedding video in a gui (getting started advice)

I have a project with a swing gui that i would like to embed a video screen in. the video will stream from a web camera and provide a live picture. I am new to the idea of handling video streams so have i come to the right place? what should i look at to get started?

Dear andreyvk ,
I've read your post about how to use a single RTP session for both media reception and trasmission (I'm referring to you RTPSocketAdapter modified version), but, at the moment, I'receive a BIND error.
I think that your post is an EXCELLENT solution. I'modified AVReceive3 and AVTransmit3 in order to accept all parameters (Local IP & Port, Remote IP & Port).
Can you please give me a simple scenario so I can understand what the mistake?
I'use AVTransmit3 and AVReceive3 from different prompts and if I run these 2 classes contemporarely both in 2 different PC (172.17.32.27 and 172.17.32.30) I can transmit the media (vfw://0 for example) using AVTransmit3 but I'can't receive nothing if I run also AVReceive3 in the same PC?
What's the problem? Furthermore, If I run first AVReceive3 from a MSDOS Prompt and subsequently I run AVTransmit3 from another prompt I see a BIND error (port already in use).
How can I use your modified RTPSocketAdapter in order to send and receive a single media from the same port (e.g. 7500).
I've used this scenario PC1: IP 172.17.32.30 Local Port 5000 and PC2:IP 172.17.32.27 LocalPort 10000
So in the PC1 I run:
AVTransmit3 vfw://0 <Local IP 172.17.32.30> <5000> <Remote IP 172.17.32.27> <10000>
AVReceive3 <Local IP 172.17.32.30/5000> <Remote IP 172.17.32.27/10000>
and in PC2:
AVTransmit3 vfw://0 <Local IP 172.17.32.27> <10000> <Remote IP 172.17.32.30> <5000>
AVReceive3 <Local IP 172.17.32.27/10000> <Remote IP 172.17.32.30/5000>
I'd like to use the same port 5000 (in PC1) and 10000 (in PC2) in order to transmit and receive rtp packets. How can i do that without receive a Bind Error? How can I receive packets (and playing these media if audio &/or video) from the same port used to send stream over the network?
How can I obtain a RTP Symmetric Transmission/Reception solution?
Please give me an hint. If you can't post this is my email: [email protected]
Message was edited by:
TheSirac

ITunes 9 - Getting Started video won't play

iTunes 9 installation was smoothly and quickly, however:
While the "Welcome to iTunes" startup window opens properly but"Getting Started with iTunes 9" movie won't fully load or play.
This first tutorial movie on the "Welcome" list only plays the first couple of minutes and stops. Close Window and/or Quit/Restart iTunes relaunches "Welcome" and "Getting Started" but the movie still won't play.
I also have the latest version of QuickTime (v7.6.4, downloaded this morning) installed under Mac OS 10.5.8.

Immediately after installing iTunes 9.0 and Opening iTunes, the 'Getting Started' folder popped up in front of the iTunes window. I wanted to 'look around' at iTunes first, so Closed the Getting Started window. Now that I'm ready to watch those videos, I can no longer FIND that folder or the videos. Anyone know what happens to them once they've been Closed? Thanks...

BASIC question: Getting video to start out paused in stead of playing?

Hello
I DO NOT KNOW FLASH - let's just get that straight. I do not know actionscript, and I'm not familiar ith the interface.
But I do know how to open a document, drag a .flv into the frame, add a playback skin, and save a swf for use on a web page.
The problem is that the videos all start playing on default. I'd like the user to have to hit the "play" button to play the video so that they are not inundated with sound when the page loads.
Any ideas here? Is this so simple that I should not have asked?
heh
Thanks,
-------------S

I found it. . .
It's in the "component inspector" in Flash. Under the "Parameters" tab, select "autoPlay" and make sure it is set to "false".
I used the "publish" setting in the File menu and I took the scripts and object code form the resulting HTML page and pasted them into my web page. It seems to work well.
This is for Flash CS4. Earlier versions do it differently, so you may need to keep looking. And they may change it (again) in future versions.
Good luck!

Can't watch Getting Started video on 16.0.1 install page with up to date Intel Mac 10.6.8 - no mp4 plugin?

"Getting Started" page for Firefox 16.0.1 has a video window that plays audio only. Firefox test page for plugins shows RealPlayer, Flash, Flip4Mac and Java are up to date. What other video plugins are required. I'm currently using Firefox 10.0.2 and I'm not inclined to update unless I have good reasons to do so.

When the page opens I get a message that plugins are missing. Clicking on Install Missing Plugins comes up with Unknown Plugin (video/mp4); Manual Install takes me to the DivX Install page - DivX is up to date.
Once I start the video, Copy Video Location is not an option with Control-click. I can access Page Source, which seems to suggest that Flash is not installed although the Plug In check page says it is.
Is this extract from Page Source helpful?: div class="video-player-no-flash" This video requires a browser with support for open video or Flash.
There doesn't seem to be an option here to be able to attach the whole Page Source as a text file.
Cheers.

SOA Server on Linux never gets started.

Guys
We are trying to install SOA Suite 11g Version 11.1.1.5 on Linux but it nevers gets started.
A thread was posted earlier but didnt get help.
Here is the earlier thread
soa-infra goes down time everytime
We tried each and every possible solution on the net but it didnt work. Now after shutting down our Admin server, our WL is not coming up. Here is the Log Link
https://docs.google.com/document/d/1SMXcCE7_5g2CGKez_lbvnmWAD0xpgza-C-dIu4UWLo0/edit?hl=en_US
When we start WebLogic from Console, this is the result:
[root@109 bin]# ./startWebLogic.sh \-Dweblogic.management.username=weblogic \-Dweblogic.management.password=welcome12# &
[3] 5712
[root@109 bin]# *****************************************************
** Setting up SOA specific environment...
EXTRA_JAVA_PROPERTIES= -da:org.apache.xmlbeans...
LD_LIBRARY_PATH=/home/u01/Oracle/Middleware/patch_wls1035/profiles/default/native:/home/u01/Oracle/Middleware/patch_ocp360/profiles/default/native:/home/u01/Oracle/Middleware/wlserver_10.3/server/native/linux/x86_64:/home/u01/Oracle/Middleware/wlserver_10.3/server/native/linux/x86_64/oci920_8:/home/u01/Oracle/Middleware/Oracle_SOA1/soa/thirdparty/edifecs/XEngine/bin
USER_MEM_ARGS=-Xms768m -Xmx1536m
** End SOA specific environment setup
** SOA specific environment is already set, skipping...
JAVA Memory arguments: -Xms768m -Xmx1536m
WLS Start Mode=Development
CLASSPATH=/home/u01/Oracle/Middleware/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/home/u01/Oracle/Middleware/Oracle_SOA1/soa/modules/user-patch.jar:/home/u01/Oracle/Middleware/Oracle_SOA1/soa/modules/soa-startup.jar::/home/u01/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/u01/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java/lib/tools.jar:/home/u01/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/home/u01/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/home/u01/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/home/u01/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/home/u01/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/home/u01/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/home/u01/Oracle/Middleware/oracle_common/soa/modules/commons-cli-1.1.jar:/home/u01/Oracle/Middleware/oracle_common/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar:/home/u01/Oracle/Middleware/Oracle_SOA1/soa/modules/oracle.soa.common.adapters_11.1.1/oracle.soa.common.adapters.jar:/home/u01/Oracle/Middleware/Oracle_SOA1/communications/modules/usermessaging-config_11.1.1.jar:/home/u01/Oracle/Middleware/oracle_common/modules/oracle.xdk_11.1.0/xsu12.jar:/home/u01/Oracle/Middleware/modules/features/weblogic.server.modules.xquery_10.3.1.0.jar:/home/u01/Oracle/Middleware/Oracle_SOA1/soa/modules/db2jcc4.jar:/home/u01/Oracle/Middleware/user_projects/domains/soa_domain/config/soa-infra:/home/u01/Oracle/Middleware/Oracle_SOA1/soa/modules/fabric-url-handler_11.1.1.jar:/home/u01/Oracle/Middleware/Oracle_SOA1/soa/modules/quartz-all-1.6.5.jar:/home/u01/Oracle/Middleware/Oracle_SOA1/soa/modules/oracle.soa.fabric_11.1.1/oracle.soa.fabric.jar:/home/u01/Oracle/Middleware/Oracle_SOA1/soa/modules/oracle.soa.fabric_11.1.1/fabric-runtime-ext-wls.jar:/home/u01/Oracle/Middleware/Oracle_SOA1/soa/modules/oracle.soa.adapter_11.1.1/oracle.soa.adapter.jar:/home/u01/Oracle/Middleware/Oracle_SOA1/soa/modules/oracle.soa.b2b_11.1.1/oracle.soa.b2b.jar:/home/u01/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/home/u01/Oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/home/u01/Oracle/Middleware/wlserver_10.3/server/lib/xqrl.jar
PATH=/home/u01/Oracle/Middleware/wlserver_10.3/server/bin:/home/u01/Oracle/Middleware/modules/org.apache.ant_1.7.1/bin:/usr/java/jre/bin:/usr/java/bin:/home/u01/Oracle/Middleware/wlserver_10.3/server/bin:/home/u01/Oracle/Middleware/modules/org.apache.ant_1.7.1/bin:/usr/java/jre/bin:/usr/java/bin:/usr/java/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/java/bin:/usr/java/bin:/root/bin:/usr/X11/bin:/usr/openwin/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b07)
Oracle JRockit(R) (build R28.1.3-11-141760-1.6.0_24-20110301-1432-linux-x86_64, compiled mode)
Starting WLS with line:
/usr/java/bin/java -jrockit -Xms768m -Xmx1536m -Dweblogic.Name=AdminServer -Djava.security.policy=/home/u01/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Xverify:none -da -Dplatform.home=/home/u01/Oracle/Middleware/wlserver_10.3 -Dwls.home=/home/u01/Oracle/Middleware/wlserver_10.3/server -Dweblogic.home=/home/u01/Oracle/Middleware/wlserver_10.3/server -Dcommon.components.home=/home/u01/Oracle/Middleware/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/home/u01/Oracle/Middleware/user_projects/domains/soa_domain -Djrockit.optfile=/home/u01/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/home/u01/Oracle/Middleware/user_projects/domains/soa_domain/config/fmwconfig/servers/AdminServer -Doracle.domain.config.dir=/home/u01/Oracle/Middleware/user_projects/domains/soa_domain/config/fmwconfig -Digf.arisidbeans.carmlloc=/home/u01/Oracle/Middleware/user_projects/domains/soa_domain/config/fmwconfig/carml -Digf.arisidstack.home=/home/u01/Oracle/Middleware/user_projects/domains/soa_domain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/home/u01/Oracle/Middleware/user_projects/domains/soa_domain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/home/u01/Oracle/Middleware/user_projects/domains/soa_domain/servers/AdminServer/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/home/u01/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/home/u01/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol|oracle.fabric.common.classloaderurl.handler|oracle.fabric.common.uddiurl.handler|oracle.bpm.io.fs.protocol -Dweblogic.jdbc.remoteEnabled=false -Doracle.security.jps.policy.migration.validate.principal=false -da:org.apache.xmlbeans... -Dbpm.enabled=true -Dsoa.archives.dir=/home/u01/Oracle/Middleware/Oracle_SOA1/soa -Dsoa.oracle.home=/home/u01/Oracle/Middleware/Oracle_SOA1 -Dsoa.instance.home=/home/u01/Oracle/Middleware/user_projects/domains/soa_domain -Dtangosol.coherence.clusteraddress=227.7.7.9 -Dtangosol.coherence.clusterport=9778 -Dtangosol.coherence.log=jdk -Djavax.xml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl -Dweblogic.transaction.blocking.commit=true -Dweblogic.transaction.blocking.rollback=true -Djavax.net.ssl.trustStore=/home/u01/Oracle/Middleware/wlserver_10.3/server/lib/DemoTrust.jks -Dem.oracle.home=/home/u01/Oracle/Middleware/oracle_common -Djava.awt.headless=true -Dbam.oracle.home=/home/u01/Oracle/Middleware/Oracle_SOA1 -Dums.oracle.home=/home/u01/Oracle/Middleware/Oracle_SOA1 -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/home/u01/Oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/home/u01/Oracle/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath -Dweblogic.management.username=weblogic -Dweblogic.management.password=welcome12# weblogic.Server
[WARN ] Use of -Djrockit.optfile is deprecated and discouraged.
<18-Aug-2011 08:28:17 o'clock BST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<18-Aug-2011 08:28:18 o'clock BST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<18-Aug-2011 08:28:18 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.1.3-11-141760-1.6.0_24-20110301-1432-linux-x86_64 from Oracle Corporation>
<18-Aug-2011 08:28:18 o'clock BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<18-Aug-2011 08:28:20 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<18-Aug-2011 08:28:20 o'clock BST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<18-Aug-2011 08:28:20 o'clock BST> <Notice> <Log Management> <BEA-170019> <The server log file /home/u01/Oracle/Middleware/user_projects/domains/soa_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
<18-Aug-2011 08:28:26 o'clock BST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<18-Aug-2011 08:28:32 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<18-Aug-2011 08:28:32 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<18-Aug-2011 08:28:32 o'clock BST> <Warning> <oracle.as.jmx.framework.MessageLocalizationHelper> <J2EE JMX-46041> <The resource for bundle "oracle.jrf.i18n.MBeanMessageBundle" with key "oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets" cannot be found.>
<18-Aug-2011 08:28:37 o'clock BST> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application em is not versioned.>
PostInstallConfigIntegration:oracle_ias_farm target auth registration is done.
<18-Aug-2011 08:28:55 o'clock BST> <Warning> <org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl> <BEA-000000> <Configurator services already initialized.>
<18-Aug-2011 08:29:01 o'clock BST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.NullPointerException
java.lang.NullPointerException
at weblogic.store.io.file.StoreFile.close(StoreFile.java:440)
at weblogic.store.io.file.Heap.open(Heap.java:320)
at weblogic.store.io.file.FileStoreIO.open(FileStoreIO.java:104)
at weblogic.store.internal.PersistentStoreImpl.recoverStoreConnections(PersistentStoreImpl.java:431)
at weblogic.store.internal.PersistentStoreImpl.open(PersistentStoreImpl.java:422)
Truncated. see log file for complete stacktrace
>
<18-Aug-2011 08:29:01 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<18-Aug-2011 08:29:01 o'clock BST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<18-Aug-2011 08:29:01 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Any Help please?
Many thanks
Deepak
Edited by: user12128585 on Aug 18, 2011 1:01 AM

Hi Anuj
This didnt help :(
Problem persists with same errors!
Any other soultion? We are thinking to recreate RCU, re install SOA and recreate domain.
But that also we have done several times but in vain.
Edited by: user12128585 on Aug 18, 2011 1:51 AM

Great videos for getting started on BC with Muse or Dreamweaver CS6

Hey all,
Just thought I'd share some helpful videos now available. This is great for new creative cloud users wanting to get their head around BC.
Getting Started with Business Catalyst and Dreamweaver CS6 – What is Business Catalyst?
Getting Started with Business Catalyst and Dreamweaver CS6 – Creating and Publishing Sites
Getting Started with Business Catalyst and Muse – What is Business Catalyst?
Getting Started with Business Catalyst and Muse – Creating and Publishing Sites
Happy learning!

Thanks Danny...awesome share!
-Sidney

T420s Linux (Fedora) Video -- Getting Started

Similar Messages

Maybe you are looking for