T43 1875 upper memory ERROR after firmware update

Hi, I got new HD hts541612j9at00 and run a bootable CD with the latest firmware update file to correct the Error 2010. However, after rebooting the system I am getting the following message (and the system freezes):
Starting Caldera DR-DOS
...(Copyright bla..bla ...bla)
EMM386: Cannot find an unused 64 kb range reserve of upper memory to use for an EMS page frame.
Any thoughts how to solve this problem with the upper memory ?

I'm haveing exactly the same problem with my Thinkpad.
Nobody around with any thoughts?

Similar Messages

OfficeJet Pro 8620e ADF jam error after firmware update

After installing the latest firmware update from the printer's touchscreen, the printer restarts and now has an error that says "Original is jammed in the Automatic Document Feeder (ADF). Open the ADF cover, remove and reload the original, then try again."
I've gone through all of the steps for clearing an ADF jam, but the notice is persistant. There is nothing (and wasn't before the upgrade) in the ADF at all. Since this coincided with the firmware update, my suspiscion is that the firmware didn't install properly or something. What do I do from here?

Thanks CribDesigner for a fast response. I finaly called HP Tech Support and they are saying ....they will replace the unit.

RV082 IE certificate error after firmware update

Hello.
HELP! I have a RV082 with firmware 2.0.2.01-tm that keeps showing a "There is a problem with this website's security certificate" error message on every computer in the office after I updated to firmware 2.0.2.01-tm (previous version was 2.0.0.19-tm). I'd click on "Continue to this website" and be able to access the router on a few computers, but for our file server. I've tested on computers running XP, 7 & 8 using IE 8, 9, & 10 and there seems to be no pattern as to which ones will allow me to gain access and which ones won't. The file server is running Server 2003.
My questions are:
1. How do I get rid of the "security certificate" error message?
2. How do I get all computers to be able to gain access to the router on the ones that need access, but can't?
3. Why did this message show up after I updated the firmware?
Thanks in advance for any help/information on resolving this problem!
Alice

Dear Alice,
Thank you for reaching the Small Business Support Community,
I suggest you to check on the below threats, they might be helpful for you to try;
https://supportforums.cisco.com/thread/2071417
(Notice the crypto key generation does not apply to your case but the IE settings yes)
https://supportforums.cisco.com/message/3761503#3761503
I hope they help you working this issue out and please do not hesitate to reach me back if there is any further assistance I may help you with.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

Thinkpad Yoga memory error after bios update

I updated BIOS to version 1.25 for windows 10 installation.Now I have errors and sometimes blue screen. Lenovo solution center test gives a memory error.WME800800-RK7CBK

Dear luca,
welcome in lenovo community,
Could you please send us your machine serial number
Thanks to use lenovo community.

N97 Memory Problem after Firmware Update

Hi all,
im having trouble with my N97.
i recently updated the software using the nokia software updater....
now, when the phone turns on it comes up " not enough memory to perform the operation "
then after it says " memory full, delete or move some data from C: Phone memory. "
before i get chance to do this the phone crashes and goes through the same process.
ive tried deleting and moving files when the phone is just plugged into my laptop.
but it persists in restarting after like 30 seconds of being switched on...
any suggestions ?
thanks

make sure you have a back up of your device which you s hould have anyway since you just did update and reformat your phone
*#7370# the default code is 12345 and then try the things listed below as well
/discussions/board/message?board.id=topfaq&thread.id=159
try this and also when you install y brower or similar go to c drive
system and delete drmg and cache folders. no worries they self replicate.
Message Edited by radical24 on 15-Dec-2009 03:37 PM
Message Edited by radical24 on 15-Dec-2009 03:38 PM
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Tecra A2: IDE #1 error after firmware update

I have a tecra a-2 notebook after installing a new firmware to toshiba dvd rom sd-r2512 combo i get this message during boot and the drive is unaccesible .What should i do?
(i've searched about , some guys solved it by changing the pins i am newbie i am not sure what is a pin is there any other simple solution for this)

Hi
Where did you find the firmware?
I assume you have used not compatible or not supported firmware and this software has either changed the master/slave/csel settings or possibly has damage the drive.
This ide #1 error appears if the BIOS cannot find the drive.
This happens because of the wrong settings or corrupt drive.
Unfortunately, I dont see any chances to solve this problem. It seems you have damage the drive ;(

3014 error i can't restore ipad after firmware update attempt

3014 error i can't restore ipad after firmware update attempt

See this thread with the same question.
https://discussions.apple.com/thread/5045573?tstart=0

Restoring after firmware update - Ways :)

Hi All,
Nowadays we are receiving quite a few complaints that customers are unable to restore the application after updating their firmware. I would like all to discuss to come up with some ways to restore their applications after firmware update.
Before updating firmware
Customer can backup his phone using Nokia PC Suite's Content Copier application.
He can store his Contacts and Messages using Nokia Communication Centre as .csv file or .txt file.
For his Contacts he can sync with pc suite supported sync applications.
Messages he can store in Memory card and he can make a backup of memory card in PC.
If he is using Nokia PC Suite for his Multimedia items he can use Image Store if he is using Nokia PC Suite or Nokia Photos if he is using Nokia OVI Suite.
For Music he can use Nokia Music Manager or Nokia Music.
Once after updating his firmware, if he is unable to restore he can get those from above said applications.
If his calendar entries are not restored(as in case of some of Nokia e 71s and Nokia N 95/95 8 GBs), for God's sake if he has got one more similar device(or device having switch application on phone), he can restore the backup file to another phone having switch application, then he can transfer his data (Contacts, Calenders etc ) to his original phone
Dear Forum members, if you have got any other work around please let me know regarding the same, which will help our customers

Hi,
If you have issue in Nokia PC Suites, [subject to your phone's compatibility with Nokia OVI Suite 2.0.0.10 ],
you can install Nokia OVI Suite 2.0.0.10 and check if you can take backup and restore it later.
Also i would suggest to use USB for taking backup, since it will be faster than Bluetooth. Also you can select one category at one time(say backup contacts alone, then Calendar, then messages etc and so on ....)
Its better to skip memory card backup while backup-ing other Phone data for faster backup. Memory card backup can be done separtely(since it wont be affetcted while updating firmware, users can safely remove memory card while updating firmware)
Nowadays though recent phones has got UDP(User Data Prevention i.e., even if you update your phone's firmware, your data wont get erased ), still it is recommended to backup your phone data.
Hope this could help
I welcome our experts to add more details related to this topic.

Data recovery after firmware update

Hi guys,
does anyone know it it is possible to recover data after firmware update in N8? some data are preserved (videos) and some are lost (photos).
thx.

if you didn't backup them, there is no way to recover them
Greece Nokia X6 RM-559 v40.0.002

Moto X 2nd 2014 error after lollipop update

I've got moto x xt1096, and faced with terrible bug after update to 5.0.
Time to time on day faced with crash and restart of stock launcher with error "unfortunatelly google search (or app) has stopped"
I made a topic on motorola forum, but didn't find solution as yet. (tried to make FDR, safe mode, clean cache/data etc.)
Error after lollipop update . All Discussions (996) . MOTO X™ 2nd Gen . Forum . Motorola Owners' Forum
does anyone faced with that issue too?
And maybe someone know any date about 5.0.2 or other update for xt1096, maybe in next update it will be fixed?

Looks like it's been released:
Android 5.0 Lollipop Now Rolling out to the Verizon Moto X 2014 | Androidheadlines.com

I keep getting a msvcr80.dll error after iTunes update failed?

I keep getting a msvcr80.dll error after iTunes update failed?

Seems the base of the problem is the update installation does not change the libraries but the software wants to see them changed. So the user has to go clear out all software that shares the libraries and then install the full version so they are rebuilt properly.

After firmware update to V2.0.03, the web UI dos not look right. (WRT160 V2)

Hi
After firmware update from V2.0.01 to V2.0.03, the web UI dos not look right.
I can't see menus, just version number and the basic setup page.
Router Linksys WRT160 v2.
Allan

Hi
Thanks for the reply.
I't works ok now.
Thanks again.
Allan

Problems after firmware update 52.0.007

Hi,
I got my phone back after the shop fixed a problem and updated the firmware to the latest version 52.0.007.
But now I have following problems:
I can't get the calendar anymore to show up on the homescreen, even after checking the checkbox to do so
The Radio app. is gone
Does anyone has a solution for this?
Iwan

It may sound crazy but sometimes you need to "hard reset" device after firmware update (beware all data erased) by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself). Sometimes UDP = User Data Prersevation feature of 5800XM can carry over corrupt entries when updating.
Happy to have helped forum with a Support Ratio = 42.5

Ovi Maps 3 don´t start after firmware update (6220...

Hello!
a few days ago I installed ovi maps 3 on my nokia 6220c and it works well. Later I updated the firmware from version 03.06 to 05.15.
After firmware update ovi maps don´t start-> "Cannot open application. Install latest version from nokia.com/maps."
But Nokia Map Updater says, there are no updates for my maps.
What´s wrong?
Can I reinstall Ovi Maps 3? Or is it possible to install Ovi Maps 3 new?
thanks

Hello!
The Map Updater said: "there is no update for your phone" ...because maps 3 is already installed.
But in the meantime I have found a solution!!
I downloaded maps 2.0 from the German nokia page and installed it. Later I started Map Updater and could update to Maps 3 and now it works!!!
I think the problem was: I first updated to Maps 3 and later updated the firmware. There was any older version of fixes included in the firmware update, so Maps 3 was damaged...
thanks
sorry for my bad English

Out of Memory error after upgrading to Reader X

We have several PDF documents that work fine on Reader 9. But after upgrading to Reader X, the files will not open. Instead, they report an Out Of Memory error and a blank document opens instead. Removing Reader X and re-installing Reader 9 corrects the issue. This has been reproduced on 3 different PCs running both Windows XP and Windows 7.
Any suggestions?

Just to throw in my 2 cents... Adobe has known about the out of memory bug at least since 01/12/2011 because that is when I reported the problem to them. I even had an escalated support case #181995624 and bug#2800823. Our problem comes from a EFI Fiery E7000 attached to our Lanier LD460c Copier. Any pdf's made from that copier will not open in Acrobat X, although they will open in lower versions of Acrobat just fine. Our only workaround is to keep Acrrobat 9 on office computers, or you can open the offending pdf in Acrobat 9 or earlier and print it to pdf, and then it will open in Acrobat X!!! They acknowledged that this was a bug, see my email chain below. This was the last update I received from Adobe, very frustrating...
From:
Sent: Wednesday, February 09, 2011 9:12 AM
To:
Cc:
Subject: RE: Case 181995624; Unable to open PDF
Hi Phil,
We do not have this information or estimate time by our Engineering team yet.
Regards,
Neeraj
From:
Sent: Monday, February 07, 2011 8:19 PM
To:
Cc:
Subject: RE: Case 181995624; Unable to open PDF
Next major release as in the next patch for Acrobat X, or as in Acrobat 11?
From:
Sent: Saturday, February 05, 2011 4:31 AM
To:
Cc:
Subject: Case 181995624; Unable to open PDF
Hi Phil,
You can get back to us with the Bug Number provided you earlier based on which we will give you the update by our Engineering team. However, the update for now is that it is decided to fix in our next major release.
Regards,
Neeraj
From:
Sent: Thursday, February 03, 2011 1:33 AM
To:
Subject: RE: Case 181995624; Unable to open PDF
Can you send me a link to where I can find information on the bug?
From:
Sent: Tuesday, February 01, 2011 10:14 AM
To:
Cc:
Subject: Case 181995624; Unable to open PDF
Hi Phil,
Hope you are doing well.
I have researched on your issue and found that it is a BUG with Acrobat X. I have logged it on your behalf so that our Engineering team can have a look on that. Please find the Bug Number #2800823 for any update on this in future. I am closing this case on your behalf.
Have a nice day.
Regards,
Neeraj
From:
Sent: Tuesday, February 01, 2011 12:22 AM
To:
Cc:
Subject: RE: Case 181995624; Unable to open PDF
Any updates on this case?
From:
Sent: Friday, January 14, 2011 2:03 PM
To:
Cc:
Subject: RE: Case 181995624; Unable to open PDF
The EFI Fiery E-7000 Controller version is 1.2.0 and it handles the scanning and printing functionality of our Lanier LD160c copier. I have attached two sample files. One is a 1 page scan from our copier. The other is a combined pdf that I just created in Acrobat 9. The first two pages of the combined pdf consists of a webpage that I printed using Acrobat 9 and then the scan from the copier is on the 3rd page. In Acrobat X, once you get to the 3rd page you will receive the Out of Memory error. It will open in previous versions of Acrobat just fine though.
From:
Sent: Friday, January 14, 2011 11:52 AM
To:
Cc:
Subject: Case 181995624; Unable to open PDF
Hi Phil,
Thanks for the information.
I have the PDF file provided by you and able to reproduce the behavior. I tried to call you at 214-303-1500 but got voice mail.
Please let me know when you will be available so that I could call you and continue further with this issue.
Regards,
Neeraj
From:
Sent: Thursday, January 13, 2011 6:57 AM
To:
Cc:
Subject: Re: Case 181995624; Unable to open PDF
It is a walk up copier and we scan to email. The EFI Fiery controller E7000 handles pdf conversion for the copier, but yes it has the latest firmware. The bottom line is that we have 3 or 4 years worth of pdfs created from that copier rendered useless by Acrobat X. They open fine in previous versions of Acrobat. Did you get the test pdf file when this case was created?
-- Sent from my Palm Pre
On Jan 12, 2011 6:12 PM, Acrobat Support <[email protected]> wrote:
Hi Philip,
Thank you for choosing Adobe Support we have got your concern, we see that you are facing an issue with opening PDF files in Acrobat X, created from Lanier (Ricoh) LD160c copier. A technical support case 181995624 has been created for your reference. In order to assist you further. We would like to have the following information.
· Are you using the latest scanner driver ?
· What is the exact scanning workflow ?
Regards
Acrobat Support

T43 1875 upper memory ERROR after firmware update

Similar Messages

Maybe you are looking for