T43 extended desktop (2nd monitor) maxes at 1280x768

I use an HD Flat panel TV with computer monitor capability as a 2nd monitor for extending my desktop.  This 2nd monitor has a very high resolution capability (the manual recommends a setting of 1920x1080 for computer connections).  The T43 display settings dialogue limits this second monitor to 1280x768 pixels, even though it allows much higher resolutions for the T43's built-in screen (I currently run at 1400x1050).
I see no Lenovo driver updates that address resolution issues for a 2nd monitor, but would really like to take advantage of a higher 2nd monitor resolution in my work.  Am I limited by my video hardware, video driver, BIOS, or what?  Is there a solution to my problem? 
The product id of my T43:   2687D3U      

Once you open up the zip, there's a "read me" in English....
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

  • T43 Extended Desktop

    Hello,
    I am attempting to use the extended desktop feature with my Thinkpad T43 series laptop.  I have an IBM Thinkvision monitor and the Radeon 300 video card, but can't seem to get the darned thing working.
    I press FN+F7 and create a profile for the extended desktop, but once I test the settings, the second screen kicks into presentation mode and comes up with an error saying the setting can not be applied properly.  Very strange and very difficult.  If anyone has any ideas, I would be happy to hear them...
    Thanks
    TWM

    How about just using the trusty old display properties of window to configure your extended desktop setting????

  • Extended Desktop (Dual Monitors) on 13'' Macbook?

    I am thinking of hooking up my Macbook to my TV using the following adapter:
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/6934002/wo/Gs5Ps WUtnG7T3zQT50TQtAqEzED/5.0.0.23.1.0.8.11.33.0.0.1.1.0.9.1.3.0.1.11.7.7.0.2.0#rev
    I was wondering if I would be able to use the TV as a 2nd monitor, or if the Macbook's screen would turn off and only allow me to use one monitor at a time.
    The TV itself is an LCD TV, and not a TV/monitor.
    Thanks a bunch,
    Jonny

    You will be able to run in any one of three different modes, whichever is to your liking:
    - Extended Desktop mode where both screens are active and the TV will be an extension of the screen on the MB.
    - Mirror mode where both screens are active but run at the same resolution and have the same image on both.
    - TV only mode where only the TVs screen is used and the lid on the MB is closed. For this mode you need to have the MB plugged into its AC adapter and you need to wake it using a mouse or some other USB or Bluetooth peripheral.

  • IMac Extended desktop & NTSC Monitor possible?

    Is there a method to jointly connect a second VGA monitor for extended desktop support along with a NTSC monitor (TV) via S-Video?

    duane i beg to differ. heres a download for most newer macs to do it. http://www.rutemoeller.com/mp/ibook/ibook_e.html although be warned applecare will not cover anything screenspanning doctor screws up. not that it has. i have used it on my imac for about 5 months and my youth directors ibook g4 1ghz. its great

  • Extend desktop primaty monitor

    I just got my new PBG4 12" aluminum and connected an external display to it, unchecked mirror, and got the desktop extended on the LCD and the external CRT.
    Is it possible to arrange the monitors so that the primary monitor, the one with the top menu bar on it, is not on the PB's LCD but on the external CRT?
    I tried different arrangments but the monitor with the menu bar on top always is on the PB's LCD.
    I can drag windows to the external monitor but then I have to move back to the primary (LCD) to access application menus, application windows open on the LCD, and even when the application main window is on the CRT (secondary), auto fill in forms or URLs appear on the LCD.
    Is this the way it is supposed to be or am I doing something wrong

    In the display preference pane, where you tried to arrange the monitors, you can drag the white menu-bar onto the other monitor.
    Matt

  • Firefox won't open/run on extended desktop/multi monitors

    Firefox will not boot and run successfully in any extended screen/desktop mode--only when using the local laptop screen itself.
    I wiped an older version, but even the installation sequence ran like cold molasses in... Had to drag windows to cause them to refresh, so I could see what options to click. Windows did not appear responsive to mouse clicks. They were, but took minutes to respond.
    Finally, I tried a Windows key-P and chose Disconnect Projector--and there was Firefox. But back at extended display, Firefox refuses to run.

    Try to disable hardware acceleration.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
    *https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

  • All menus have display problem (flash) when using FF on extended desktop monitor

    I use two monitors at work. Each time I display FF on the "secondary" monitor (extended Desktop), all menus (normal menu, bookmarks, right click), flashes going from visible to hidden and so on).

    I have the same problem. Windows 7 (64 Bit), extended desktop, 2 monitor system. I have AMD HD 4800 graphics card with all AMD updates current as of 12/8/2012.
    The drop down menus display briefly (flicker) and then are not visible. If I am careful and know the dropdown line I want, I can blindly select it. This happens only on the second monitor on the extended desktop. If I move Mozilla to the primary monitor the same page works correctly.
    Disabling the hardware acceleration and restarting Mozilla resolves the issue. While I can use Mozilla, it is still not ready for prime time using hardware acceleration.
    Given that it is the only Browser or applicaiton that has this problem with displaying drop down menus on the second monitor, I would suggest that it is either a Mozilla hardware acceleration problem or Mozilla needs to work with the graphics card manufacturers to resolve a problem that only Mozilla seems to have with their drivers.

  • Windows xp extended desktop not showing up on 2nd monitor all of a sudden

    I've used a 2nd monitor as my main monitor for my T61.  I powered down today to move to another location, when I reconnected to my usual 2nd monitor, the screen just comes up blue, the cursor jumps between my 2 monitors, but there is no Windows coming up on the external monitor 2.  Usually everything boots up automatically to both of my monitors.......I've gone into Windows XP display settings, extended the desktop - but still nothing - just blue with the cursor either on my laptop monitor 1 or jumping over to external monitor 2.  Help?

    Try this:
    1. Go to Display Settings and set the Display to setting 1. (Multiple Monitors) and exit settings.
    2. Press Fn and F7 until BOTH Monitors are Shown.
    3. You shouuld be able to select  Either or  Both Monitors in Sequence.
    I replaced my BIOS Battery and had the same problem.

  • Can the 2nd monitor be an extended desktop?

    i know its a silly and simple question but im new to hooking up a second monitor. So if i get the right connector from the apple store and hook up a second monitor can it be an extended desktop or will it only be a mirrored image?

    Can the 2nd monitor be an extended desktop?
    Yes.
    (52224)

  • Two w2408h monitors,extended desktop..2nd not recognized at cold start?

    Hi All:
    HPe9180f with Vista 64 bit Home Premium.
    I have two HP w2408h monitors, purchased and installed on the above computer,when new.  I have tried Tech Support who have certainly tried to take "ownership" of my issue, but with no solution, I have given up.
    My issue is that I can work correctly with both monitors, extended desktop mode, if I never shut off my computer....if I do, the second monitor will not turn on during a cold start.  My workaround, discovered by accident, is to log on in a non-admin user, wait until all programs, etc are loaded and then Restart....my second monitor then activates.  Does anybody know what to do to do to make Windows/ Bios recognize that I have two monitors permanently in use at all times, especially at startup? 

    GC, I would search for an updated driver for you video card/chip.  This sounds like it may be a driver problem.  Video and Audio problems are very difficult to diagnose from afar.  So, I always begin with the most obvious solutions.  Just call me "Mr. Obvious".
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Can my computer display 'extended desktop' with a second monitor?

    I believe I have a G4 Quicksilver 867 (2001) (bought it used and figuring out which model G4 is not that easy). I recently got a second monitor, but I only seem to have the option to have a mirrored setup (which works well). Is there anything I can do or rather what are my options to get it to show extended desktop. My video card is
    Chipset Model: GeForce2 MX
    Type: Display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 32 MB
    Vendor: nVIDIA (0x10de)
    Device ID: 0x0110
    Revision ID: 0x00a1
    ROM Revision: 1049
    Will I have to get a new graphics card or is there a workaround of some sort?

    Thanks, not what I wanted to hear, but helpful. hope you'll answer a couple of questions. I bought this computer as a second (do taxes, surf the internet, connected to my wireless router, escape my three kids wanting to use the primary). I've been very happy with it for its limited use (my primary is one of the first Imac G5's).
    1st: Do you think it's worth putting a faster processor in it? My G5 has the latest OS, but I'm hesitant to go past 10.411 with the G4 867
    2nd: Would you recommend a video card update to run extended desktop?
    3rd: Can you run extended desktop on the original IMAC G5's (1.8 ghz, GeForce FX 5200, 64 mb ram)?

  • I'm guessing that my Powermac G5 Quad running 10.4.11 does support extended desktop.  My present monitor is a 1600x1200.  Can a second monitor of smaller size and lower resolution work as an extended desktop?

    I'm guessing that my Powermac G5 Quad running 10.4.11 does support extended desktop.  My present monitor is a 1600x1200.  Can a second monitor of smaller size and lower resolution work as an extended desktop?

    It should easily.
    Power Mac G5: Display Compatibility
    http://support.apple.com/kb/HT2707?viewlocale=en_US
    Display Support:
    Dual Displays*
    Resolution Support:
    2560x1600
    Details:
    Apple advertised that this system can support "two Apple flat-panel displays for each graphics card installed". The default graphics card can support "up to 2560 by 1600 pixels" with the dual-link DVI port and "up to 1920 by 1200 pixels" with the single-link DVI port. It also can support analog resolutions "up to 2048 by 1536 pixels".
    http://www.everymac.com/systems/apple/powermac_g5/stats/powermac_g5_quad_2.5.htm l
    "Quad Core" (2.5)
    Video Card:
    GeForce 6600
    VRAM:
    256 MB
    Primary Max Resolution:
    2560x1600
    Secondary Max Resolution:
    1920x1200
    Display Connectors:
    1 dual-link DVI
    1 single-link DVI
    http://www.everymac.com/systems/apple/powermac_g5/faq/powermac-g5-adc-ports-dvi- ports-resolutions-supported.html

  • Using a second computer (an iMac) as an extended desktop monitor

    Hello
    I have a powerbook g4 and would really like to use a separate older iMac as an extended desktop. Is there a way to turn the iMac into just a monitor recognized by my powerbook?

    Does ScreenRecycler do what you want?
    (39553)

  • Dual Display, 2 Monitors - Extended Desktop

    Hello Everyone:
    There isn't a clear cut answer or solution in connected a Macbook Air to 2 external monitors in an attempt to create an extended desktop. I have read older posts that it's either doable or not doable. My questions are the following:
    -Is it possible to connect a new Macbook Air to 2 external monitors for extended desktop purposes?
    -Some users have reported lag issues (mouse dragging , delays, etc.). Will this happen for sure with a Macbook Air or is it a monitor issue?
    -What's the best non-Apple monitor brand that would work best with a Macbook Air for dual display purposes? I've read that Dells have a problem in this regard.
    -What would be the advantage or disadvantage of using a dock station in setting up a dual display environment? Would this add to the lag, latency factor?
    I'm thinking of investing in a new Macbook Air, but I want to make sure I dont end up with silly issues - such as latency, monitors, etc.
    Thank you for all your help and advise.
    Best,
    G.

    Yes, extended desktop works with monitors set to differant resoultions. the Monitors pref pane allows you to select relative arrangements and rez of all monitors composing the extended desktop.
    personally I run a dell CRT at 2304 X 1728 @ 60Hz along with an NEC 6FG a 2048 X 1280 @ 60Hz off a radeon 9800pro on an MDD.

  • 2nd Monitor died - How does one grab tools back from "that" desktop?

    Hi -
    One of our two monitors died. There are tools on the 2nd monitor's desktop that we can't "see" until the 2nd monitor returns. How do we pull those tools over to the main desktop?
    Also, there are a few finder windows that are too large to grab the bottom scaler and shrink them back. (There is no tool bar on the top of the second monitor giving just a little bit more room.) Is there a minimize button somewhere for "finder" windows?
    Thanks!

    Ps - just found the "zoom" button on my own - so - I have the finder windows under control - now to learn how to get to that other desktop without the view into the other desktop!

Maybe you are looking for

  • Runtime Error DBIF_RSQL_INVALID_RSQL

    Hello Gurus, One of the ABAP programs failed in the process chains with a short dump. The details are as follows: Could you help me resolve this? Thanks and best wishes, raj Runtime Error          DBIF_RSQL_INVALID_RSQL Exception              CX_SY_O

  • Upgrading from DW 6.0 to 8.0

    Are there any know issues when upgrading from DW version 6.0 to 8.0? Will the page functionality that was created in version 6.0 still be functional in 8.0? (for example the use of includes and/or CSS?) Are the navigation and use of the product basic

  • Ipod itunes wont sync

    hello there im using itunes 10.2.1.1 64 bit with acer 5745g laptop windows 7 64 bit trying to sync with 6th gen classic ipod 120 gb. Each time i try to sync it freezes after (the best ive got is 500 songs) from a 100gb library giving me multiple erro

  • How come you can't put a Tab in a Cluster?

    Hello, How come you can't put a Tab Control in a Cluster? It looks like users have been asking this question for years, and all the way back to LV versions 6.1. Someday, please, pretty please, NI. Please. Maybe by version 9.5 of LV? Kevin.

  • Personal Hotspot Security

    I know that the iPhone's personal hotspot uses strong WPA2 protection. But I was wondering if there was any way that people could eavesdrop, spy on your wi-fi traffic, grab it out of the air, so to speak? I know this might sound like a dumb question,